/* $OpenBSD: if_tx.c,v 1.23 2002/06/03 20:01:36 deraadt Exp $ */ /* $FreeBSD: src/sys/pci/if_tx.c,v 1.45 2001/02/07 20:11:02 semenu Exp $ */ /*- * Copyright (c) 1997 Semen Ustimenko (semen@iclub.nsu.ru) * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ /* * EtherPower II 10/100 Fast Ethernet (tx0) * (aka SMC9432TX based on SMC83c170 EPIC chip) * * Thanks are going to Steve Bauer and Jason Wright. * * todo: * Implement FULL IFF_MULTICAST support. * */ /* We should define compile time options before if_txvar.h included */ #define EARLY_RX 1 /*#define EPIC_DEBUG 1*/ #include #include #include #include #include #include #include #include #if defined(__FreeBSD__) #define NBPFILTER 1 #include #include #include #include #include #include /* for vtophys */ #include /* for vtophys */ #include /* for DELAY */ #include #include #include #include #include #include #include #include #include #include #include #include #include "miibus_if.h" #include #else /* __OpenBSD__ */ #include "bpfilter.h" #include #include #include #include #include #ifdef INET #include #include #include #include #include #endif #ifdef IPX #include #include #endif #ifdef NS #include #include #endif #if NBPFILTER > 0 #include #endif #include #include #include #include #include #include #include #include #include #endif #if defined(__FreeBSD__) MODULE_DEPEND(tx, miibus, 1, 1, 1); #endif #if defined(__FreeBSD__) #define EPIC_INTR_RET_TYPE void #define EPIC_MIIBUS_WRITEREG_RET_TYPE int #define EPIC_STATIC static #else /* __OpenBSD__ */ #define EPIC_INTR_RET_TYPE int #define EPIC_MIIBUS_WRITEREG_RET_TYPE void #define EPIC_STATIC #endif EPIC_STATIC int epic_ifioctl(register struct ifnet *, u_long, caddr_t); EPIC_STATIC EPIC_INTR_RET_TYPE epic_intr(void *); EPIC_STATIC int epic_common_attach(epic_softc_t *); EPIC_STATIC void epic_ifstart(struct ifnet *); EPIC_STATIC void epic_ifwatchdog(struct ifnet *); EPIC_STATIC int epic_init(epic_softc_t *); EPIC_STATIC void epic_stop(epic_softc_t *); EPIC_STATIC void epic_rx_done(epic_softc_t *); EPIC_STATIC void epic_tx_done(epic_softc_t *); EPIC_STATIC int epic_init_rings(epic_softc_t *); EPIC_STATIC void epic_free_rings(epic_softc_t *); EPIC_STATIC void epic_stop_activity(epic_softc_t *); EPIC_STATIC void epic_start_activity(epic_softc_t *); EPIC_STATIC void epic_set_rx_mode(epic_softc_t *); EPIC_STATIC void epic_set_tx_mode(epic_softc_t *); EPIC_STATIC void epic_set_mc_table(epic_softc_t *); EPIC_STATIC int epic_read_eeprom(epic_softc_t *,u_int16_t); EPIC_STATIC void epic_output_eepromw(epic_softc_t *, u_int16_t); EPIC_STATIC u_int16_t epic_input_eepromw(epic_softc_t *); EPIC_STATIC u_int8_t epic_eeprom_clock(epic_softc_t *,u_int8_t); EPIC_STATIC void epic_write_eepromreg(epic_softc_t *,u_int8_t); EPIC_STATIC u_int8_t epic_read_eepromreg(epic_softc_t *); EPIC_STATIC int epic_read_phy_reg(epic_softc_t *, int, int); EPIC_STATIC void epic_write_phy_reg(epic_softc_t *, int, int, int); EPIC_STATIC int epic_miibus_readreg(struct device*, int, int); EPIC_STATIC EPIC_MIIBUS_WRITEREG_RET_TYPE epic_miibus_writereg(struct device*, int, int, int); EPIC_STATIC void epic_miibus_statchg(struct device *); EPIC_STATIC void epic_miibus_mediainit(struct device *); EPIC_STATIC int epic_ifmedia_upd(struct ifnet *); EPIC_STATIC void epic_ifmedia_sts(struct ifnet *, struct ifmediareq *); EPIC_STATIC void epic_tick(void *); /* ------------------------------------------------------------------------- OS-specific part ------------------------------------------------------------------------- */ #if defined(__OpenBSD__) /* -----------------------------OpenBSD------------------------------------- */ int epic_openbsd_probe(struct device *,void *,void *); void epic_openbsd_attach(struct device *, struct device *, void *); void epic_openbsd_shutdown(void *); struct cfattach tx_ca = { sizeof(epic_softc_t), epic_openbsd_probe, epic_openbsd_attach }; struct cfdriver tx_cd = { NULL,"tx",DV_IFNET }; /* Synopsis: Check if device id corresponds with SMC83C170 id. */ int epic_openbsd_probe( struct device *parent, void *match, void *aux ) { struct pci_attach_args *pa = aux; if( PCI_VENDOR(pa->pa_id) != SMC_VENDORID ) return 0; if( PCI_PRODUCT(pa->pa_id) == SMC_DEVICEID_83C170 ) return 1; return 0; } void epic_openbsd_attach( struct device *parent, struct device *self, void *aux ) { epic_softc_t *sc = (epic_softc_t*)self; struct pci_attach_args *pa = aux; pci_chipset_tag_t pc = pa->pa_pc; pci_intr_handle_t ih; const char *intrstr = NULL; struct ifnet *ifp; bus_size_t iosize; u_int32_t command; command = pci_conf_read(pc, pa->pa_tag, PCI_COMMAND_STATUS_REG); command |= PCI_COMMAND_IO_ENABLE | PCI_COMMAND_MEM_ENABLE | PCI_COMMAND_MASTER_ENABLE; pci_conf_write(pc, pa->pa_tag, PCI_COMMAND_STATUS_REG, command); command = pci_conf_read(pc, pa->pa_tag, PCI_COMMAND_STATUS_REG); if ((command & (PCI_COMMAND_IO_ENABLE | PCI_COMMAND_MEM_ENABLE)) == 0) { printf(": neither i/o nor mem enabled\n"); return; } if (command & PCI_COMMAND_MEM_ENABLE) { if (pci_mapreg_map(pa, PCI_BASEMEM, PCI_MAPREG_TYPE_MEM, 0, &sc->sc_st, &sc->sc_sh, NULL, &iosize, 0)) { printf(": can't map mem space\n"); return; } } else { if (pci_mapreg_map(pa, PCI_BASEIO, PCI_MAPREG_TYPE_IO, 0, &sc->sc_st, &sc->sc_sh, NULL, &iosize, 0)) { printf(": can't map i/o space\n"); return; } } ifp = &sc->sc_if; bcopy(sc->dev.dv_xname, ifp->if_xname,IFNAMSIZ); ifp->if_softc = sc; ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST; ifp->if_ioctl = epic_ifioctl; ifp->if_start = epic_ifstart; ifp->if_watchdog = epic_ifwatchdog; /* Fetch card id */ sc->cardvend = pci_conf_read(pc, pa->pa_tag, PCI_SUBVEND_0); sc->cardid = pci_conf_read(pc, pa->pa_tag, PCI_SUBDEV_0); /* Do common attach procedure */ if( epic_common_attach(sc) ) return; /* Map interrupt */ if( pci_intr_map(pa, &ih)) { printf(": can't map interrupt\n"); return; } intrstr = pci_intr_string(pc, ih); sc->sc_ih = pci_intr_establish(pc, ih, IPL_NET, epic_intr, sc, self->dv_xname); if( NULL == sc->sc_ih ) { printf(": can't establish interrupt"); if( intrstr )printf(" at %s",intrstr); printf("\n"); return; } /* Display some info */ printf(": %s address %s\n", intrstr, ether_sprintf(sc->sc_macaddr)); /* Init ifmedia interface */ ifmedia_init(&sc->miibus.mii_media, 0, epic_ifmedia_upd, epic_ifmedia_sts); sc->miibus.mii_ifp = ifp; sc->miibus.mii_readreg = epic_miibus_readreg; sc->miibus.mii_writereg = epic_miibus_writereg; sc->miibus.mii_statchg = epic_miibus_statchg; mii_phy_probe(self, &sc->miibus, 0xffffffff); if (LIST_FIRST(&sc->miibus.mii_phys) == NULL) { ifmedia_add(&sc->miibus.mii_media, IFM_ETHER|IFM_NONE,0,NULL); ifmedia_set(&sc->miibus.mii_media, IFM_ETHER|IFM_NONE); } else ifmedia_set(&sc->miibus.mii_media, IFM_ETHER|IFM_AUTO); timeout_set(&sc->sc_tmo, epic_tick, sc); /* Attach os interface and bpf */ if_attach(ifp); ether_ifattach(ifp); /* Set shutdown routine to stop DMA process */ shutdownhook_establish(epic_openbsd_shutdown, sc); } /* Simple call epic_stop() */ void epic_openbsd_shutdown( void *sc) { epic_stop(sc); } #else /* __FreeBSD__ */ /* -----------------------------FreeBSD------------------------------------- */ static int epic_freebsd_probe(device_t); static int epic_freebsd_attach(device_t); static void epic_freebsd_shutdown(device_t); static int epic_freebsd_detach(device_t); static struct epic_type *epic_devtype(device_t); static device_method_t epic_methods[] = { /* Device interface */ DEVMETHOD(device_probe, epic_freebsd_probe), DEVMETHOD(device_attach, epic_freebsd_attach), DEVMETHOD(device_detach, epic_freebsd_detach), DEVMETHOD(device_shutdown, epic_freebsd_shutdown), /* bus interface */ DEVMETHOD(bus_print_child, bus_generic_print_child), DEVMETHOD(bus_driver_added, bus_generic_driver_added), /* MII interface */ DEVMETHOD(miibus_readreg, epic_miibus_readreg), DEVMETHOD(miibus_writereg, epic_miibus_writereg), DEVMETHOD(miibus_statchg, epic_miibus_statchg), DEVMETHOD(miibus_mediainit, epic_miibus_mediainit), { 0, 0 } }; static driver_t epic_driver = { "tx", epic_methods, sizeof(epic_softc_t) }; static devclass_t epic_devclass; DRIVER_MODULE(if_tx, pci, epic_driver, epic_devclass, 0, 0); DRIVER_MODULE(miibus, tx, miibus_driver, miibus_devclass, 0, 0); static struct epic_type epic_devs[] = { { SMC_VENDORID, SMC_DEVICEID_83C170, "SMC EtherPower II 10/100" }, { 0, 0, NULL } }; static int epic_freebsd_probe(dev) device_t dev; { struct epic_type *t; t = epic_devtype(dev); if (t != NULL) { device_set_desc(dev, t->name); return(0); } return(ENXIO); } static struct epic_type * epic_devtype(dev) device_t dev; { struct epic_type *t; t = epic_devs; while(t->name != NULL) { if ((pci_get_vendor(dev) == t->ven_id) && (pci_get_device(dev) == t->dev_id)) { return(t); } t++; } return (NULL); } #if defined(EPIC_USEIOSPACE) #define EPIC_RES SYS_RES_IOPORT #define EPIC_RID PCIR_BASEIO #else #define EPIC_RES SYS_RES_MEMORY #define EPIC_RID PCIR_BASEMEM #endif /* * Do FreeBSD-specific attach routine, like map registers, alloc softc * structure and etc. */ static int epic_freebsd_attach(dev) device_t dev; { struct ifnet *ifp; epic_softc_t *sc; u_int32_t command; int unit, error; int i, s, rid, tmp; s = splimp (); sc = device_get_softc(dev); unit = device_get_unit(dev); /* Preinitialize softc structure */ bzero(sc, sizeof(epic_softc_t)); sc->unit = unit; sc->dev = dev; /* Fill ifnet structure */ ifp = &sc->sc_if; ifp->if_unit = unit; ifp->if_name = "tx"; ifp->if_softc = sc; ifp->if_flags = IFF_BROADCAST|IFF_SIMPLEX|IFF_MULTICAST; ifp->if_ioctl = epic_ifioctl; ifp->if_output = ether_output; ifp->if_start = epic_ifstart; ifp->if_watchdog = epic_ifwatchdog; ifp->if_init = (if_init_f_t*)epic_init; ifp->if_timer = 0; ifp->if_baudrate = 10000000; IFQ_SET_MAXLEN(&ifp->if_snd, TX_RING_SIZE - 1); IFQ_SET_READY(&ifp->if_snd); /* Enable ports, memory and busmastering */ command = pci_read_config(dev, PCIR_COMMAND, 4); command |= PCIM_CMD_PORTEN | PCIM_CMD_MEMEN | PCIM_CMD_BUSMASTEREN; pci_write_config(dev, PCIR_COMMAND, command, 4); command = pci_read_config(dev, PCIR_COMMAND, 4); #if defined(EPIC_USEIOSPACE) if (!(command & PCIM_CMD_PORTEN)) { device_printf(dev, "failed to enable I/O mapping!\n"); error = ENXIO; goto fail; } #else if (!(command & PCIM_CMD_MEMEN)) { device_printf(dev, "failed to enable memory mapping!\n"); error = ENXIO; goto fail; } #endif rid = EPIC_RID; sc->res = bus_alloc_resource(dev, EPIC_RES, &rid, 0, ~0, 1, RF_ACTIVE); if (sc->res == NULL) { device_printf(dev, "couldn't map ports/memory\n"); error = ENXIO; goto fail; } sc->sc_st = rman_get_bustag(sc->res); sc->sc_sh = rman_get_bushandle(sc->res); /* Allocate interrupt */ rid = 0; sc->irq = bus_alloc_resource(dev, SYS_RES_IRQ, &rid, 0, ~0, 1, RF_SHAREABLE | RF_ACTIVE); if (sc->irq == NULL) { device_printf(dev, "couldn't map interrupt\n"); bus_release_resource(dev, EPIC_RES, EPIC_RID, sc->res); error = ENXIO; goto fail; } error = bus_setup_intr(dev, sc->irq, INTR_TYPE_NET, epic_intr, sc, &sc->sc_ih); if (error) { bus_release_resource(dev, SYS_RES_IRQ, 0, sc->irq); bus_release_resource(dev, EPIC_RES, EPIC_RID, sc->res); device_printf(dev, "couldn't set up irq\n"); goto fail; } /* Bring the chip out of low-power mode and reset it. */ CSR_WRITE_4( sc, GENCTL, GENCTL_SOFT_RESET ); DELAY(500); /* Workaround for Application Note 7-15 */ for (i=0; i<16; i++) CSR_WRITE_4(sc, TEST1, TEST1_CLOCK_TEST); /* * Do ifmedia setup. */ if (mii_phy_probe(dev, &sc->miibus, epic_ifmedia_upd, epic_ifmedia_sts)) { device_printf(dev, "MII without any PHY!?\n"); bus_teardown_intr(dev, sc->irq, sc->sc_ih); bus_release_resource(dev, SYS_RES_IRQ, 0, sc->irq); bus_release_resource(dev, EPIC_RES, EPIC_RID, sc->res); error = ENXIO; goto fail; } /* Do OS independent part, including chip wakeup and reset */ if (epic_common_attach(sc)) { device_printf(dev, "memory distribution error\n"); bus_teardown_intr(dev, sc->irq, sc->sc_ih); bus_release_resource(dev, SYS_RES_IRQ, 0, sc->irq); bus_release_resource(dev, EPIC_RES, EPIC_RID, sc->res); error = ENXIO; goto fail; } /* Fetch card id */ sc->cardvend = pci_read_config(sc->dev, PCIR_SUBVEND_0, 2); sc->cardid = pci_read_config(sc->dev, PCIR_SUBDEV_0, 2); printf("vend/id(%x/%x) ", sc->cardvend, sc->cardid); /* Display ethernet address ,... */ device_printf(dev, "address %6D,", sc->sc_macaddr, ":"); /* board type and ... */ printf(" type "); for(i=0x2c;i<0x32;i++) { tmp = epic_read_eeprom( sc, i ); if( ' ' == (u_int8_t)tmp ) break; printf("%c",(u_int8_t)tmp); tmp >>= 8; if( ' ' == (u_int8_t)tmp ) break; printf("%c",(u_int8_t)tmp); } printf("\n"); /* Attach to OS's managers */ ether_ifattach(ifp, ETHER_BPF_SUPPORTED); callout_handle_init(&sc->stat_ch); fail: splx(s); return(error); } /* * Detach driver and free resources */ static int epic_freebsd_detach(dev) device_t dev; { struct ifnet *ifp; epic_softc_t *sc; int s; s = splimp(); sc = device_get_softc(dev); ifp = &sc->arpcom.ac_if; ether_ifdetach(ifp, ETHER_BPF_SUPPORTED); epic_stop(sc); bus_generic_detach(dev); device_delete_child(dev, sc->miibus); bus_teardown_intr(dev, sc->irq, sc->sc_ih); bus_release_resource(dev, SYS_RES_IRQ, 0, sc->irq); bus_release_resource(dev, EPIC_RES, EPIC_RID, sc->res); free(sc->pool, M_DEVBUF); splx(s); return(0); } #undef EPIC_RES #undef EPIC_RID /* * Stop all chip I/O so that the kernel's probe routines don't * get confused by errant DMAs when rebooting. */ EPIC_STATIC void epic_freebsd_shutdown(dev) device_t dev; { epic_softc_t *sc; sc = device_get_softc(dev); epic_stop(sc); return; } #endif /* __OpenBSD__ */ /* ------------------------------------------------------------------------ OS-independing part ------------------------------------------------------------------------ */ /* * This is if_ioctl handler. */ EPIC_STATIC int epic_ifioctl(ifp, command, data) struct ifnet *ifp; u_long command; caddr_t data; { epic_softc_t *sc = ifp->if_softc; struct mii_data *mii; struct ifreq *ifr = (struct ifreq *) data; int x, error = 0; x = splimp(); switch (command) { #if defined(__FreeBSD__) case SIOCSIFADDR: case SIOCGIFADDR: case SIOCSIFMTU: error = ether_ioctl(ifp, command, data); break; #else /* __OpenBSD__ */ case SIOCSIFADDR: { struct ifaddr *ifa = (struct ifaddr *)data; ifp->if_flags |= IFF_UP; switch(ifa->ifa_addr->sa_family) { #if INET case AF_INET: epic_stop(sc); epic_init(sc); arp_ifinit(&sc->arpcom,ifa); break; #endif #if NS case AF_NS: { register struct ns_addr * ina = &IA_SNS(ifa)->sns_addr; if( ns_nullhost(*ina) ) ina->x_host = *(union ns_host *) LLADDR(ifp->if_sadl); else bcopy(ina->x_host.c_host, LLADDR(ifp->if_sadl), ifp->if_addrlen); epic_stop(sc); epic_init(sc); break; } #endif default: epic_stop(sc); epic_init(sc); break; } } #endif /* __FreeBSD__ */ case SIOCSIFFLAGS: /* * If the interface is marked up and stopped, then start it. * If it is marked down and running, then stop it. */ if (ifp->if_flags & IFF_UP) { if ((ifp->if_flags & IFF_RUNNING) == 0) { epic_init(sc); break; } } else { if (ifp->if_flags & IFF_RUNNING) { epic_stop(sc); break; } } /* Handle IFF_PROMISC flag */ epic_stop_activity(sc); epic_set_rx_mode(sc); epic_start_activity(sc); break; case SIOCADDMULTI: case SIOCDELMULTI: /* Update out multicast list */ #if defined(__FreeBSD__) && __FreeBSD_version >= 300000 epic_set_mc_table(sc); error = 0; #else error = (command == SIOCADDMULTI) ? ether_addmulti((struct ifreq *)data, &sc->arpcom) : ether_delmulti((struct ifreq *)data, &sc->arpcom); if (error == ENETRESET) { epic_set_mc_table(sc); error = 0; } #endif break; case SIOCSIFMEDIA: case SIOCGIFMEDIA: mii = epic_mii_ptr(sc); error = ifmedia_ioctl(ifp, ifr, &mii->mii_media, command); break; default: error = EINVAL; } splx(x); return error; } /* * OS-independed part of attach process. allocate memory for descriptors * and frag lists, wake up chip, read MAC address and PHY identyfier. * Return -1 on failure. */ EPIC_STATIC int epic_common_attach(sc) epic_softc_t *sc; { int i; caddr_t pool; i = sizeof(struct epic_frag_list)*TX_RING_SIZE + sizeof(struct epic_rx_desc)*RX_RING_SIZE + sizeof(struct epic_tx_desc)*TX_RING_SIZE + PAGE_SIZE; sc->pool = (epic_softc_t *) malloc( i, M_DEVBUF, M_NOWAIT); if (sc->pool == NULL) { printf(": can't allocate memory for buffers\n"); return -1; } bzero(sc->pool, i); /* Align pool on PAGE_SIZE */ pool = (caddr_t)sc->pool; pool = (caddr_t)((u_int32_t)(pool + PAGE_SIZE - 1) & ~(PAGE_SIZE - 1)); /* Distribute memory */ sc->tx_flist = (void *)pool; pool += sizeof(struct epic_frag_list)*TX_RING_SIZE; sc->rx_desc = (void *)pool; pool += sizeof(struct epic_rx_desc)*RX_RING_SIZE; sc->tx_desc = (void *)pool; /* Bring the chip out of low-power mode. */ CSR_WRITE_4( sc, GENCTL, GENCTL_SOFT_RESET); DELAY(500); /* Workaround for Application Note 7-15 */ for (i=0; i<16; i++) CSR_WRITE_4(sc, TEST1, TEST1_CLOCK_TEST); /* Read mac address from EEPROM */ for (i = 0; i < ETHER_ADDR_LEN / sizeof(u_int16_t); i++) ((u_int16_t *)sc->sc_macaddr)[i] = epic_read_eeprom(sc,i); /* Set defaults */ sc->tx_threshold = TRANSMIT_THRESHOLD; sc->txcon = TXCON_DEFAULT; sc->miicfg = MIICFG_SMI_ENABLE; sc->phyid = EPIC_UNKN_PHY; sc->serinst = -1; if (sc->cardvend != SMC_VENDORID) printf(EPIC_FORMAT ": unknown card vendor 0x%04x\n", EPIC_ARGS(sc), sc->cardvend); return 0; } /* * This is if_start handler. It takes mbufs from if_snd queue * and queue them for transmit, one by one, until TX ring become full * or queue become empty. */ EPIC_STATIC void epic_ifstart(ifp) struct ifnet * ifp; { epic_softc_t *sc = ifp->if_softc; struct epic_tx_buffer *buf; struct epic_tx_desc *desc; struct epic_frag_list *flist; struct mbuf *m0; register struct mbuf *m; register int i; while( sc->pending_txs < TX_RING_SIZE ){ buf = sc->tx_buffer + sc->cur_tx; desc = sc->tx_desc + sc->cur_tx; flist = sc->tx_flist + sc->cur_tx; /* Get next packet to send */ IFQ_DEQUEUE( &ifp->if_snd, m0 ); /* If nothing to send, return */ if( NULL == m0 ) return; /* Fill fragments list */ for( m=m0, i=0; (NULL != m) && (i < EPIC_MAX_FRAGS); m = m->m_next, i++ ) { flist->frag[i].fraglen = m->m_len; flist->frag[i].fragaddr = vtophys( mtod(m, caddr_t) ); } flist->numfrags = i; /* If packet was more than EPIC_MAX_FRAGS parts, */ /* recopy packet to new allocated mbuf cluster */ if( NULL != m ){ EPIC_MGETCLUSTER(m); if( NULL == m ){ printf(EPIC_FORMAT ": cannot allocate mbuf cluster\n",EPIC_ARGS(sc)); m_freem(m0); ifp->if_oerrors++; continue; } m_copydata( m0, 0, m0->m_pkthdr.len, mtod(m,caddr_t) ); flist->frag[0].fraglen = m->m_pkthdr.len = m->m_len = m0->m_pkthdr.len; m->m_pkthdr.rcvif = ifp; flist->numfrags = 1; flist->frag[0].fragaddr = vtophys( mtod(m, caddr_t) ); m_freem(m0); m0 = m; } buf->mbuf = m0; sc->pending_txs++; sc->cur_tx = ( sc->cur_tx + 1 ) & TX_RING_MASK; desc->control = 0x01; desc->txlength = max(m0->m_pkthdr.len,ETHER_MIN_LEN-ETHER_CRC_LEN); desc->status = 0x8000; CSR_WRITE_4( sc, COMMAND, COMMAND_TXQUEUED ); /* Set watchdog timer */ ifp->if_timer = 8; #if NBPFILTER > 0 if( ifp->if_bpf ) bpf_mtap( EPIC_BPFTAP_ARG(ifp), m0 ); #endif } ifp->if_flags |= IFF_OACTIVE; return; } /* * Synopsis: Finish all received frames. */ EPIC_STATIC void epic_rx_done(sc) epic_softc_t *sc; { u_int16_t len; struct epic_rx_buffer *buf; struct epic_rx_desc *desc; struct mbuf *m; while( !(sc->rx_desc[sc->cur_rx].status & 0x8000) ) { buf = sc->rx_buffer + sc->cur_rx; desc = sc->rx_desc + sc->cur_rx; /* Switch to next descriptor */ sc->cur_rx = (sc->cur_rx+1) & RX_RING_MASK; /* Check for errors, this should happend */ /* only if SAVE_ERRORED_PACKETS is set, */ /* normaly rx errors generate RXE interrupt */ if( !(desc->status & 1) ) { dprintf((EPIC_FORMAT ": Rx error status: 0x%x\n",EPIC_ARGS(sc),desc->status)); sc->sc_if.if_ierrors++; desc->status = 0x8000; continue; } /* Save packet length and mbuf contained packet */ len = desc->rxlength - ETHER_CRC_LEN; m = buf->mbuf; /* Try to get mbuf cluster */ EPIC_MGETCLUSTER( buf->mbuf ); if( NULL == buf->mbuf ) { printf(EPIC_FORMAT ": cannot allocate mbuf cluster\n",EPIC_ARGS(sc)); buf->mbuf = m; desc->status = 0x8000; sc->sc_if.if_ierrors++; continue; } /* Point to new mbuf, and give descriptor to chip */ desc->bufaddr = vtophys( mtod( buf->mbuf, caddr_t ) ); desc->status = 0x8000; /* * First mbuf in packet holds the ethernet and * packet headers. */ m->m_pkthdr.rcvif = &(sc->sc_if); m->m_pkthdr.len = m->m_len = len; #if !defined(__FreeBSD__) #if NBPFILTER > 0 /* Give mbuf to BPFILTER */ if( sc->sc_if.if_bpf ) bpf_mtap( EPIC_BPFTAP_ARG(&sc->sc_if), m ); #endif /* NBPFILTER > 0 */ #endif /* !__FreeBSD__ */ /* Give mbuf to OS */ ether_input_mbuf(&sc->sc_if, m); /* Successfuly received frame */ sc->sc_if.if_ipackets++; } return; } /* * Synopsis: Do last phase of transmission. I.e. if desc is * transmitted, decrease pending_txs counter, free mbuf contained * packet, switch to next descriptor and repeat until no packets * are pending or descriptor is not transmitted yet. */ EPIC_STATIC void epic_tx_done(sc) epic_softc_t *sc; { struct epic_tx_buffer *buf; struct epic_tx_desc *desc; u_int16_t status; while( sc->pending_txs > 0 ){ buf = sc->tx_buffer + sc->dirty_tx; desc = sc->tx_desc + sc->dirty_tx; status = desc->status; /* If packet is not transmitted, thou followed */ /* packets are not transmitted too */ if( status & 0x8000 ) break; /* Packet is transmitted. Switch to next and */ /* free mbuf */ sc->pending_txs--; sc->dirty_tx = (sc->dirty_tx + 1) & TX_RING_MASK; m_freem( buf->mbuf ); buf->mbuf = NULL; /* Check for errors and collisions */ if( status & 0x0001 ) sc->sc_if.if_opackets++; else sc->sc_if.if_oerrors++; sc->sc_if.if_collisions += (status >> 8) & 0x1F; #if defined(EPIC_DEBUG) if( (status & 0x1001) == 0x1001 ) dprintf((EPIC_FORMAT ": frame not transmitted due collisions\n",EPIC_ARGS(sc))); #endif } if( sc->pending_txs < TX_RING_SIZE ) sc->sc_if.if_flags &= ~IFF_OACTIVE; } /* * Interrupt function */ EPIC_STATIC EPIC_INTR_RET_TYPE epic_intr(arg) void *arg; { epic_softc_t * sc = (epic_softc_t *) arg; int status,i=4; #if defined(__OpenBSD__) int claimed = 0; #endif while( i-- && ((status = CSR_READ_4(sc, INTSTAT)) & INTSTAT_INT_ACTV) ){ #if defined(__OpenBSD__) claimed = 1; #endif CSR_WRITE_4( sc, INTSTAT, status ); if( status & (INTSTAT_RQE|INTSTAT_RCC|INTSTAT_OVW) ) { epic_rx_done( sc ); if( status & (INTSTAT_RQE|INTSTAT_OVW) ){ #if defined(EPIC_DEBUG) if( status & INTSTAT_OVW ) printf(EPIC_FORMAT ": RX buffer overflow\n",EPIC_ARGS(sc)); if( status & INTSTAT_RQE ) printf(EPIC_FORMAT ": RX FIFO overflow\n",EPIC_ARGS(sc)); #endif if( !(CSR_READ_4( sc, COMMAND ) & COMMAND_RXQUEUED) ) CSR_WRITE_4( sc, COMMAND, COMMAND_RXQUEUED ); sc->sc_if.if_ierrors++; } } if( status & (INTSTAT_TXC|INTSTAT_TCC|INTSTAT_TQE) ) { epic_tx_done( sc ); if(!(sc->sc_if.if_flags & IFF_OACTIVE) && !IFQ_IS_EMPTY( &sc->sc_if.if_snd )) epic_ifstart( &sc->sc_if ); } /* Check for errors */ if( status & (INTSTAT_FATAL|INTSTAT_PMA|INTSTAT_PTA| INTSTAT_APE|INTSTAT_DPE|INTSTAT_TXU|INTSTAT_RXE) ){ if( status & (INTSTAT_FATAL|INTSTAT_PMA|INTSTAT_PTA| INTSTAT_APE|INTSTAT_DPE) ){ printf(EPIC_FORMAT ": PCI fatal error occurred (%s%s%s%s)\n", EPIC_ARGS(sc), (status&INTSTAT_PMA)?"PMA":"", (status&INTSTAT_PTA)?" PTA":"", (status&INTSTAT_APE)?" APE":"", (status&INTSTAT_DPE)?" DPE":"" ); epic_stop(sc); epic_init(sc); break; } if (status & INTSTAT_RXE) { dprintf((EPIC_FORMAT ": CRC/Alignment error\n",EPIC_ARGS(sc))); sc->sc_if.if_ierrors++; } /* Tx FIFO underflow. Increase tx threshold, */ /* if it grown above 2048, disable EARLY_TX */ if (status & INTSTAT_TXU) { if( sc->tx_threshold > 0x800 ) { sc->txcon &= ~TXCON_EARLY_TRANSMIT_ENABLE; dprintf((EPIC_FORMAT ": TX underrun error, early tx disabled\n",EPIC_ARGS(sc))); } else { sc->tx_threshold += 0x40; dprintf((EPIC_FORMAT ": TX underrun error, tx threshold increased to %d\n",EPIC_ARGS(sc),sc->tx_threshold)); } CSR_WRITE_4(sc, COMMAND, COMMAND_TXUGO | COMMAND_TXQUEUED); epic_stop_activity(sc); epic_set_tx_mode(sc); epic_start_activity(sc); sc->sc_if.if_oerrors++; } } } /* If no packets are pending, thus no timeouts */ if( sc->pending_txs == 0 ) sc->sc_if.if_timer = 0; #if defined(__OpenBSD__) return claimed; #endif } /* * Synopsis: This one is called if packets wasn't transmitted * during timeout. Try to deallocate transmitted packets, and * if success continue to work. */ EPIC_STATIC void epic_ifwatchdog(ifp) struct ifnet *ifp; { epic_softc_t *sc = ifp->if_softc; int x; x = splimp(); printf(EPIC_FORMAT ": device timeout %d packets, ", EPIC_ARGS(sc),sc->pending_txs); /* Try to finish queued packets */ epic_tx_done( sc ); /* If not successful */ if( sc->pending_txs > 0 ){ ifp->if_oerrors+=sc->pending_txs; /* Reinitialize board */ printf("reinitialization\n"); epic_stop(sc); epic_init(sc); } else printf("seems we can continue normaly\n"); /* Start output */ if( !IFQ_IS_EMPTY( &ifp->if_snd ) ) epic_ifstart( ifp ); splx(x); } /* * Set media options. */ EPIC_STATIC int epic_ifmedia_upd(ifp) struct ifnet *ifp; { epic_softc_t *sc; struct mii_data *mii; struct ifmedia *ifm; struct mii_softc *miisc; int cfg, media; sc = ifp->if_softc; mii = epic_mii_ptr(sc); ifm = &mii->mii_media; media = ifm->ifm_cur->ifm_media; /* Do not do anything if interface is not up */ if(!(ifp->if_flags & IFF_UP)) return (0); /* * Lookup current selected PHY */ if (IFM_INST(media) == sc->serinst) { sc->phyid = EPIC_SERIAL; sc->physc = NULL; } else { /* If we're not selecting serial interface, select MII mode */ sc->miicfg &= ~MIICFG_SERIAL_ENABLE; CSR_WRITE_4(sc, MIICFG, sc->miicfg); dprintf((EPIC_FORMAT ": MII selected\n", EPIC_ARGS(sc))); /* Default to unknown PHY */ sc->phyid = EPIC_UNKN_PHY; /* Lookup selected PHY */ for (miisc = LIST_FIRST(&mii->mii_phys); miisc != NULL; miisc = LIST_NEXT(miisc, mii_list)) { if (IFM_INST(media) == miisc->mii_inst) { sc->physc = miisc; break; } } /* Identify selected PHY */ if (sc->physc) { int id1, id2, model, oui; id1 = PHY_READ(sc->physc, MII_PHYIDR1); id2 = PHY_READ(sc->physc, MII_PHYIDR2); oui = MII_OUI(id1, id2); model = MII_MODEL(id2); switch (oui) { case MII_OUI_QUALSEMI: if (model == MII_MODEL_QUALSEMI_QS6612) sc->phyid = EPIC_QS6612_PHY; break; case MII_OUI_xxALTIMA: if (model == MII_MODEL_xxALTIMA_AC101) sc->phyid = EPIC_AC101_PHY; break; case MII_OUI_xxLEVEL1: if (model == MII_MODEL_xxLEVEL1_LXT970) sc->phyid = EPIC_LXT970_PHY; break; } } } /* * Do PHY specific card setup */ /* Call this, to isolate all not selected PHYs and * set up selected */ mii_mediachg(mii); /* Do our own setup */ switch (sc->phyid) { case EPIC_QS6612_PHY: break; case EPIC_AC101_PHY: /* We have to powerup fiber transceivers */ if (IFM_SUBTYPE(media) == IFM_100_FX) sc->miicfg |= MIICFG_694_ENABLE; else sc->miicfg &= ~MIICFG_694_ENABLE; CSR_WRITE_4(sc, MIICFG, sc->miicfg); break; case EPIC_LXT970_PHY: /* We have to powerup fiber transceivers */ cfg = PHY_READ(sc->physc, MII_LXTPHY_CONFIG); if (IFM_SUBTYPE(media) == IFM_100_FX) cfg |= CONFIG_LEDC1 | CONFIG_LEDC0; else cfg &= ~(CONFIG_LEDC1 | CONFIG_LEDC0); PHY_WRITE(sc->physc, MII_LXTPHY_CONFIG, cfg); break; case EPIC_SERIAL: /* Select serial PHY, (10base2/BNC usually) */ sc->miicfg |= MIICFG_694_ENABLE | MIICFG_SERIAL_ENABLE; CSR_WRITE_4(sc, MIICFG, sc->miicfg); /* There is no driver to fill this */ mii->mii_media_active = media; mii->mii_media_status = 0; /* We need to call this manualy as i wasn't called * in mii_mediachg() */ epic_miibus_statchg(&sc->dev); dprintf((EPIC_FORMAT ": SERIAL selected\n", EPIC_ARGS(sc))); break; default: printf(EPIC_FORMAT ": ERROR! Unknown PHY selected\n", EPIC_ARGS(sc)); return (EINVAL); } return(0); } /* * Report current media status. */ EPIC_STATIC void epic_ifmedia_sts(ifp, ifmr) struct ifnet *ifp; struct ifmediareq *ifmr; { epic_softc_t *sc; struct mii_data *mii; struct ifmedia *ifm; sc = ifp->if_softc; mii = epic_mii_ptr(sc); ifm = &mii->mii_media; /* Nothing should be selected if interface is down */ if(!(ifp->if_flags & IFF_UP)) { ifmr->ifm_active = IFM_NONE; ifmr->ifm_status = 0; return; } /* Call underlying pollstat, if not serial PHY */ if (sc->phyid != EPIC_SERIAL) mii_pollstat(mii); /* Simply copy media info */ ifmr->ifm_active = mii->mii_media_active; ifmr->ifm_status = mii->mii_media_status; return; } /* * Callback routine, called on media change. */ EPIC_STATIC void epic_miibus_statchg(dev) struct device* dev; { epic_softc_t *sc; struct mii_data *mii; int media; sc = epic_dev_ptr(dev); mii = epic_mii_ptr(sc); media = mii->mii_media_active; sc->txcon &= ~(TXCON_LOOPBACK_MODE | TXCON_FULL_DUPLEX); /* If we are in full-duplex mode or loopback operation, * we need to decouple receiver and transmitter. */ if (IFM_OPTIONS(media) & (IFM_FDX | IFM_LOOP)) sc->txcon |= TXCON_FULL_DUPLEX; /* On some cards we need manualy set fullduplex led */ if (sc->cardid == SMC9432FTX || sc->cardid == SMC9432FTX_SC) { if (IFM_OPTIONS(media) & IFM_FDX) sc->miicfg |= MIICFG_694_ENABLE; else sc->miicfg &= ~MIICFG_694_ENABLE; CSR_WRITE_4(sc, MIICFG, sc->miicfg); } /* Update baudrate */ if (IFM_SUBTYPE(media) == IFM_100_TX || IFM_SUBTYPE(media) == IFM_100_FX) sc->sc_if.if_baudrate = 100000000; else sc->sc_if.if_baudrate = 10000000; epic_set_tx_mode(sc); return; } EPIC_STATIC void epic_miibus_mediainit(dev) struct device* dev; { epic_softc_t *sc; struct mii_data *mii; struct ifmedia *ifm; int media; sc = epic_dev_ptr(dev); mii = epic_mii_ptr(sc); ifm = &mii->mii_media; /* Add Serial Media Interface if present, this applies to * SMC9432BTX serie */ if(CSR_READ_4(sc, MIICFG) & MIICFG_PHY_PRESENT) { /* Store its instance */ sc->serinst = mii->mii_instance++; /* Add as 10base2/BNC media */ media = IFM_MAKEWORD(IFM_ETHER, IFM_10_2, 0, sc->serinst); ifmedia_add(ifm, media, 0, NULL); /* Report to user */ printf(EPIC_FORMAT ": serial PHY detected (10Base2/BNC)\n",EPIC_ARGS(sc)); } return; } /* * Reset chip, allocate rings, and update media. */ EPIC_STATIC int epic_init(sc) epic_softc_t *sc; { struct ifnet *ifp = &sc->sc_if; struct mii_data *mii; int s,i; s = splimp(); /* If interface is already running, then we need not do anything */ if (ifp->if_flags & IFF_RUNNING) { splx(s); return 0; } /* Soft reset the chip (we have to power up card before) */ CSR_WRITE_4( sc, GENCTL, 0 ); CSR_WRITE_4( sc, GENCTL, GENCTL_SOFT_RESET ); /* * Reset takes 15 pci ticks which depends on PCI bus speed. * Assuming it >= 33000000 hz, we have wait at least 495e-6 sec. */ DELAY(500); /* Wake up */ CSR_WRITE_4( sc, GENCTL, 0 ); /* Workaround for Application Note 7-15 */ for (i=0; i<16; i++) CSR_WRITE_4(sc, TEST1, TEST1_CLOCK_TEST); /* Initialize rings */ if( epic_init_rings( sc ) ) { printf(EPIC_FORMAT ": failed to init rings\n",EPIC_ARGS(sc)); splx(s); return -1; } /* Give rings to EPIC */ CSR_WRITE_4( sc, PRCDAR, vtophys( sc->rx_desc ) ); CSR_WRITE_4( sc, PTCDAR, vtophys( sc->tx_desc ) ); /* Put node address to EPIC */ CSR_WRITE_4( sc, LAN0, ((u_int16_t *)sc->sc_macaddr)[0] ); CSR_WRITE_4( sc, LAN1, ((u_int16_t *)sc->sc_macaddr)[1] ); CSR_WRITE_4( sc, LAN2, ((u_int16_t *)sc->sc_macaddr)[2] ); /* Set tx mode, includeing transmit threshold */ epic_set_tx_mode(sc); /* Compute and set RXCON. */ epic_set_rx_mode( sc ); /* Set multicast table */ epic_set_mc_table( sc ); /* Enable interrupts by setting the interrupt mask. */ CSR_WRITE_4( sc, INTMASK, INTSTAT_RCC | /* INTSTAT_RQE | INTSTAT_OVW | INTSTAT_RXE | */ /* INTSTAT_TXC | */ INTSTAT_TCC | INTSTAT_TQE | INTSTAT_TXU | INTSTAT_FATAL); /* Acknowledge all pending interrupts */ CSR_WRITE_4(sc, INTSTAT, CSR_READ_4(sc, INTSTAT)); /* Enable interrupts, set for PCI read multiple and etc */ CSR_WRITE_4( sc, GENCTL, GENCTL_ENABLE_INTERRUPT | GENCTL_MEMORY_READ_MULTIPLE | GENCTL_ONECOPY | GENCTL_RECEIVE_FIFO_THRESHOLD64 ); /* Mark interface running ... */ if( ifp->if_flags & IFF_UP ) ifp->if_flags |= IFF_RUNNING; else ifp->if_flags &= ~IFF_RUNNING; /* ... and free */ ifp->if_flags &= ~IFF_OACTIVE; /* Start Rx process */ epic_start_activity(sc); /* Reset all PHYs */ mii = epic_mii_ptr(sc); if (mii->mii_instance) { struct mii_softc *miisc; LIST_FOREACH(miisc, &mii->mii_phys, mii_list) mii_phy_reset(miisc); } /* Set appropriate media */ epic_ifmedia_upd(ifp); splx(s); timeout_add(&sc->sc_tmo, hz); return 0; } /* * Synopsis: calculate and set Rx mode. Chip must be in idle state to * access RXCON. */ EPIC_STATIC void epic_set_rx_mode(sc) epic_softc_t *sc; { u_int32_t flags = sc->sc_if.if_flags; u_int32_t rxcon = RXCON_DEFAULT; rxcon |= (flags & IFF_PROMISC) ? RXCON_PROMISCUOUS_MODE : 0; CSR_WRITE_4( sc, RXCON, rxcon ); return; } /* * Synopsis: Set transmit control register. Chip must be in idle state to * access TXCON. */ EPIC_STATIC void epic_set_tx_mode(sc) epic_softc_t *sc; { if (sc->txcon & TXCON_EARLY_TRANSMIT_ENABLE) CSR_WRITE_4 (sc, ETXTHR, sc->tx_threshold); CSR_WRITE_4 (sc, TXCON, sc->txcon); } /* * Synopsis: This function should update multicast hash table. * I suppose there is a bug in chips MC filter so this function * only set it to receive all MC packets. The second problem is * that we should wait for TX and RX processes to stop before * reprogramming MC filter. The epic_stop_activity() and * epic_start_activity() should help to do this. */ EPIC_STATIC void epic_set_mc_table(sc) epic_softc_t *sc; { struct ifnet *ifp = &sc->sc_if; if( ifp->if_flags & IFF_MULTICAST ){ CSR_WRITE_4( sc, MC0, 0xFFFF ); CSR_WRITE_4( sc, MC1, 0xFFFF ); CSR_WRITE_4( sc, MC2, 0xFFFF ); CSR_WRITE_4( sc, MC3, 0xFFFF ); } return; } /* * Synopsis: Start receive process and transmit one, if they need. */ EPIC_STATIC void epic_start_activity(sc) epic_softc_t *sc; { /* Start rx process */ CSR_WRITE_4(sc, COMMAND, COMMAND_RXQUEUED | COMMAND_START_RX | (sc->pending_txs?COMMAND_TXQUEUED:0)); dprintf((EPIC_FORMAT ": activity started\n",EPIC_ARGS(sc))); } /* * Synopsis: Completely stop Rx and Tx processes. If TQE is set additional * packet needs to be queued to stop Tx DMA. */ EPIC_STATIC void epic_stop_activity(sc) epic_softc_t *sc; { int i; /* Stop Tx and Rx DMA */ CSR_WRITE_4(sc,COMMAND,COMMAND_STOP_RX|COMMAND_STOP_RDMA|COMMAND_STOP_TDMA); /* Wait Rx and Tx DMA to stop (why 1 ms ??? XXX) */ dprintf((EPIC_FORMAT ": waiting Rx and Tx DMA to stop\n",EPIC_ARGS(sc))); for(i=0;i<0x1000;i++) { if((CSR_READ_4(sc,INTSTAT) & (INTSTAT_TXIDLE | INTSTAT_RXIDLE)) == (INTSTAT_TXIDLE | INTSTAT_RXIDLE) ) break; DELAY(1); } if( !(CSR_READ_4(sc,INTSTAT)&INTSTAT_RXIDLE) ) printf(EPIC_FORMAT ": can't stop Rx DMA\n",EPIC_ARGS(sc)); if( !(CSR_READ_4(sc,INTSTAT)&INTSTAT_TXIDLE) ) printf(EPIC_FORMAT ": can't stop Tx DMA\n",EPIC_ARGS(sc)); /* Catch all finished packets */ epic_rx_done(sc); epic_tx_done(sc); /* * May need to queue one more packet if TQE, this is rare but existing * case. */ if( (CSR_READ_4( sc, INTSTAT ) & INTSTAT_TQE) && !(CSR_READ_4( sc, INTSTAT ) & INTSTAT_TXIDLE) ) { struct epic_tx_desc *desc; struct epic_frag_list *flist; struct epic_tx_buffer *buf; struct mbuf *m0; dprintf((EPIC_FORMAT ": queue last packet\n",EPIC_ARGS(sc))); desc = sc->tx_desc + sc->cur_tx; flist = sc->tx_flist + sc->cur_tx; buf = sc->tx_buffer + sc->cur_tx; if ((desc->status & 0x8000) || (buf->mbuf != NULL)) return; MGETHDR(m0,M_DONTWAIT,MT_DATA); if (NULL == m0) return; /* Prepare mbuf */ m0->m_len = min(MHLEN,ETHER_MIN_LEN-ETHER_CRC_LEN); flist->frag[0].fraglen = m0->m_len; m0->m_pkthdr.len = m0->m_len; m0->m_pkthdr.rcvif = &sc->sc_if; bzero(mtod(m0,caddr_t),m0->m_len); /* Fill fragments list */ flist->frag[0].fraglen = m0->m_len; flist->frag[0].fragaddr = vtophys( mtod(m0, caddr_t) ); flist->numfrags = 1; /* Fill in descriptor */ buf->mbuf = m0; sc->pending_txs++; sc->cur_tx = (sc->cur_tx + 1) & TX_RING_MASK; desc->control = 0x01; desc->txlength = max(m0->m_pkthdr.len,ETHER_MIN_LEN-ETHER_CRC_LEN); desc->status = 0x8000; /* Launch transmition */ CSR_WRITE_4(sc, COMMAND, COMMAND_STOP_TDMA | COMMAND_TXQUEUED); /* Wait Tx DMA to stop (for how long??? XXX) */ dprintf((EPIC_FORMAT ": waiting Tx DMA to stop\n",EPIC_ARGS(sc))); for(i=0;i<1000;i++) { if( (CSR_READ_4(sc,INTSTAT)&INTSTAT_TXIDLE) == INTSTAT_TXIDLE ) break; DELAY(1); } if( !(CSR_READ_4(sc,INTSTAT)&INTSTAT_TXIDLE) ) printf(EPIC_FORMAT ": can't stop TX DMA\n",EPIC_ARGS(sc)); else epic_tx_done(sc); } dprintf((EPIC_FORMAT ": activity stoped\n",EPIC_ARGS(sc))); } /* * Synopsis: Shut down board and deallocates rings. */ EPIC_STATIC void epic_stop(sc) epic_softc_t *sc; { int s; timeout_del(&sc->sc_tmo); s = splimp(); sc->sc_if.if_timer = 0; /* Disable interrupts */ CSR_WRITE_4( sc, INTMASK, 0 ); CSR_WRITE_4( sc, GENCTL, 0 ); /* Try to stop Rx and TX processes */ epic_stop_activity(sc); /* Reset chip */ CSR_WRITE_4( sc, GENCTL, GENCTL_SOFT_RESET ); DELAY(1000); /* Make chip go to bed */ CSR_WRITE_4(sc, GENCTL, GENCTL_POWER_DOWN); /* Free memory allocated for rings */ epic_free_rings(sc); /* Mark as stoped */ sc->sc_if.if_flags &= ~IFF_RUNNING; splx(s); return; } /* * Synopsis: This function should free all memory allocated for rings. */ EPIC_STATIC void epic_free_rings(sc) epic_softc_t *sc; { int i; for(i=0;irx_buffer + i; struct epic_rx_desc *desc = sc->rx_desc + i; desc->status = 0; desc->buflength = 0; desc->bufaddr = 0; if( buf->mbuf ) m_freem( buf->mbuf ); buf->mbuf = NULL; } for(i=0;itx_buffer + i; struct epic_tx_desc *desc = sc->tx_desc + i; desc->status = 0; desc->buflength = 0; desc->bufaddr = 0; if( buf->mbuf ) m_freem( buf->mbuf ); buf->mbuf = NULL; } } /* * Synopsis: Allocates mbufs for Rx ring and point Rx descs to them. * Point Tx descs to fragment lists. Check that all descs and fraglists * are bounded and aligned properly. */ EPIC_STATIC int epic_init_rings(sc) epic_softc_t *sc; { int i; sc->cur_rx = sc->cur_tx = sc->dirty_tx = sc->pending_txs = 0; for (i = 0; i < RX_RING_SIZE; i++) { struct epic_rx_buffer *buf = sc->rx_buffer + i; struct epic_rx_desc *desc = sc->rx_desc + i; desc->status = 0; /* Owned by driver */ desc->next = vtophys( sc->rx_desc + ((i+1) & RX_RING_MASK) ); if( (desc->next & 3) || ((desc->next & 0xFFF) + sizeof(struct epic_rx_desc) > 0x1000 ) ) printf(EPIC_FORMAT ": WARNING! rx_desc is misbound or misaligned\n",EPIC_ARGS(sc)); EPIC_MGETCLUSTER( buf->mbuf ); if( NULL == buf->mbuf ) { epic_free_rings(sc); return -1; } desc->bufaddr = vtophys( mtod(buf->mbuf,caddr_t) ); desc->buflength = ETHER_MAX_FRAME_LEN; desc->status = 0x8000; /* Give to EPIC */ } for (i = 0; i < TX_RING_SIZE; i++) { struct epic_tx_buffer *buf = sc->tx_buffer + i; struct epic_tx_desc *desc = sc->tx_desc + i; desc->status = 0; desc->next = vtophys( sc->tx_desc + ( (i+1) & TX_RING_MASK ) ); if( (desc->next & 3) || ((desc->next & 0xFFF) + sizeof(struct epic_tx_desc) > 0x1000 ) ) printf(EPIC_FORMAT ": WARNING! tx_desc is misbound or misaligned\n",EPIC_ARGS(sc)); buf->mbuf = NULL; desc->bufaddr = vtophys( sc->tx_flist + i ); if( (desc->bufaddr & 3) || ((desc->bufaddr & 0xFFF) + sizeof(struct epic_frag_list) > 0x1000 ) ) printf(EPIC_FORMAT ": WARNING! frag_list is misbound or misaligned\n",EPIC_ARGS(sc)); } return 0; } /* * EEPROM operation functions */ EPIC_STATIC void epic_write_eepromreg(sc, val) epic_softc_t *sc; u_int8_t val; { u_int16_t i; CSR_WRITE_1( sc, EECTL, val ); for (i=0; i<0xFF; i++) if( !(CSR_READ_1( sc, EECTL ) & 0x20) ) break; return; } EPIC_STATIC u_int8_t epic_read_eepromreg(sc) epic_softc_t *sc; { return CSR_READ_1(sc, EECTL); } EPIC_STATIC u_int8_t epic_eeprom_clock(sc, val) epic_softc_t *sc; u_int8_t val; { epic_write_eepromreg( sc, val ); epic_write_eepromreg( sc, (val | 0x4) ); epic_write_eepromreg( sc, val ); return epic_read_eepromreg( sc ); } EPIC_STATIC void epic_output_eepromw(sc, val) epic_softc_t *sc; u_int16_t val; { int i; for( i = 0xF; i >= 0; i--){ if( (val & (1 << i)) ) epic_eeprom_clock( sc, 0x0B ); else epic_eeprom_clock( sc, 3); } } EPIC_STATIC u_int16_t epic_input_eepromw(sc) epic_softc_t *sc; { int i; int tmp; u_int16_t retval = 0; for( i = 0xF; i >= 0; i--) { tmp = epic_eeprom_clock( sc, 0x3 ); if( tmp & 0x10 ){ retval |= (1 << i); } } return retval; } EPIC_STATIC int epic_read_eeprom(sc, loc) epic_softc_t *sc; u_int16_t loc; { u_int16_t dataval; u_int16_t read_cmd; epic_write_eepromreg( sc , 3); if( epic_read_eepromreg( sc ) & 0x40 ) read_cmd = ( loc & 0x3F ) | 0x180; else read_cmd = ( loc & 0xFF ) | 0x600; epic_output_eepromw( sc, read_cmd ); dataval = epic_input_eepromw( sc ); epic_write_eepromreg( sc, 1 ); return dataval; } /* * Here goes MII read/write routines */ EPIC_STATIC int epic_read_phy_reg(sc, phy, reg) epic_softc_t *sc; int phy, reg; { int i; CSR_WRITE_4 (sc, MIICTL, ((reg << 4) | (phy << 9) | 0x01)); for (i=0;i<0x100;i++) { if( !(CSR_READ_4(sc, MIICTL) & 0x01) ) break; DELAY(1); } return (CSR_READ_4 (sc, MIIDATA)); } EPIC_STATIC void epic_write_phy_reg(sc, phy, reg, val) epic_softc_t *sc; int phy, reg, val; { int i; CSR_WRITE_4 (sc, MIIDATA, val); CSR_WRITE_4 (sc, MIICTL, ((reg << 4) | (phy << 9) | 0x02)); for(i=0;i<0x100;i++) { if( !(CSR_READ_4(sc, MIICTL) & 0x02) ) break; DELAY(1); } return; } EPIC_STATIC int epic_miibus_readreg(dev, phy, reg) struct device* dev; int phy, reg; { epic_softc_t *sc; sc = epic_dev_ptr(dev); return (PHY_READ_2(sc, phy, reg)); } EPIC_STATIC EPIC_MIIBUS_WRITEREG_RET_TYPE epic_miibus_writereg(dev, phy, reg, data) struct device* dev; int phy, reg, data; { epic_softc_t *sc; sc = epic_dev_ptr(dev); PHY_WRITE_2(sc, phy, reg, data); #if !defined(__OpenBSD__) return (0); #endif } EPIC_STATIC void epic_tick(vsc) void *vsc; { epic_softc_t *sc = vsc; struct mii_data *mii; mii = epic_mii_ptr(sc); if (sc->phyid != EPIC_SERIAL) mii_tick(mii); }