/* $OpenBSD: if_wi_pci.c,v 1.9 2001/10/25 19:40:14 mickey Exp $ */ /* * Copyright (c) 2001 Todd C. Miller * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY * AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL * THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ /* * Copyright (c) 1997, 1998, 1999 * Bill Paul . All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by Bill Paul. * 4. Neither the name of the author nor the names of any co-contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF * THE POSSIBILITY OF SUCH DAMAGE. */ /* * This is a PCI shim for the Wavelan wireless network driver. * It works with PCI adaptors based on the PLX 9050 and PLX 9052 * PCI to "dumb bus" bridge chip. It has been tested with the * Global Sun Technology GL24110P02 (aka Linksys WDT11), 3Com 3CRWE777A, * and Netgear MA301. It is also expected to work with the * Global Sun GL24110P and Eumitcom WL11000P. * * All we do here is handle the PCI match and attach, set up an * interrupt handler entry point, and setup the PLX chip for level * interrupts and config index 1. * * The PLX 9052 provides us with multiple PCI address space mappings. * The primary mappings at PCI registers 0x10 (mem) and 0x14 (I/O) are for * the PLX chip itself, *NOT* the pcmcia card. * The PLX 9052 provides 4 local address space registers: 0x18, 0x1C, * 0x20, and 0x24. The mem and I/O spaces for the PCMCIA card are * mapped to 0x18 and 0x1C respectively. * * The datasheet may be downloaded from PLX (though you do have to register) * http://www.plxtech.com/products/toolbox/9050.htm */ #include #include #include #include #include #include #include #include #ifdef INET #include #include #endif #include #include #include #include #include #include #include #include #define WI_PCI_CBMA 0x10 #define WI_PCI_PLX_LOMEM 0x10 /* PLX chip membase */ #define WI_PCI_PLX_LOIO 0x14 /* PLX chip iobase */ #define WI_PCI_LOMEM 0x18 /* ISA membase */ #define WI_PCI_LOIO 0x1C /* ISA iobase */ const struct wi_pci_product *wi_pci_lookup __P((struct pci_attach_args *pa)); int wi_pci_match __P((struct device *, void *, void *)); void wi_pci_attach __P((struct device *, struct device *, void *)); int wi_intr __P((void *)); int wi_attach __P((struct wi_softc *, int)); struct cfattach wi_pci_ca = { sizeof (struct wi_softc), wi_pci_match, wi_pci_attach }; static const struct wi_pci_product { pci_vendor_id_t pp_vendor; pci_product_id_t pp_product; int pp_plx; } wi_pci_products[] = { { PCI_VENDOR_GLOBALSUN, PCI_PRODUCT_GLOBALSUN_GL24110P, 1 }, { PCI_VENDOR_GLOBALSUN, PCI_PRODUCT_GLOBALSUN_GL24110P02, 1 }, { PCI_VENDOR_EUMITCOM, PCI_PRODUCT_EUMITCOM_WL11000P, 1 }, { PCI_VENDOR_3COM, PCI_PRODUCT_3COM_3CRWE777A, 1 }, { PCI_VENDOR_NETGEAR, PCI_PRODUCT_NETGEAR_MA301, 1 }, { PCI_VENDOR_INTERSIL, PCI_PRODUCT_INTERSIL_MINI_PCI_WLAN, 0 }, { 0, 0 } }; const struct wi_pci_product * wi_pci_lookup(pa) struct pci_attach_args *pa; { const struct wi_pci_product *pp; for (pp = wi_pci_products; pp->pp_product != 0; pp++) { if (PCI_VENDOR(pa->pa_id) == pp->pp_vendor && PCI_PRODUCT(pa->pa_id) == pp->pp_product) return (pp); } return (NULL); } int wi_pci_match(parent, match, aux) struct device *parent; void *match; void *aux; { return (wi_pci_lookup(aux) != NULL); } void wi_pci_attach(parent, self, aux) struct device *parent; struct device *self; void *aux; { struct wi_softc *sc = (struct wi_softc *)self; struct pci_attach_args *pa = aux; const struct wi_pci_product *pp; pci_intr_handle_t ih; bus_space_handle_t ioh, memh; bus_space_tag_t iot = pa->pa_iot; bus_space_tag_t memt = pa->pa_memt; pci_chipset_tag_t pc = pa->pa_pc; pcireg_t csr; const char *intrstr; pp = wi_pci_lookup(pa); if (pp->pp_plx) { /* Map memory and I/O registers. */ if (pci_mapreg_map(pa, WI_PCI_LOMEM, PCI_MAPREG_TYPE_MEM, 0, &memt, &memh, NULL, NULL, 0) != 0) { printf(": can't map mem space\n"); return; } if (pci_mapreg_map(pa, WI_PCI_LOIO, PCI_MAPREG_TYPE_IO, 0, &iot, &ioh, NULL, NULL, 0) != 0) { printf(": can't map I/O space\n"); return; } } else { if (pci_mapreg_map(pa, WI_PCI_CBMA, PCI_MAPREG_TYPE_MEM, 0, &iot, &ioh, NULL, NULL, 0) != 0) { printf(": can't map mem space\n"); return; } memt = iot; memh = ioh; } sc->wi_btag = iot; sc->wi_bhandle = ioh; /* Enable the card. */ csr = pci_conf_read(pc, pa->pa_tag, PCI_COMMAND_STATUS_REG); pci_conf_write(pc, pa->pa_tag, PCI_COMMAND_STATUS_REG, csr | PCI_COMMAND_MASTER_ENABLE); /* Make sure interrupts are disabled. */ CSR_WRITE_2(sc, WI_INT_EN, 0); CSR_WRITE_2(sc, WI_EVENT_ACK, 0xFFFF); /* Map and establish the interrupt. */ if (pci_intr_map(pa, &ih)) { printf(": couldn't map interrupt\n"); return; } intrstr = pci_intr_string(pc, ih); sc->sc_ih = pci_intr_establish(pc, ih, IPL_NET, wi_intr, sc, sc->sc_dev.dv_xname); if (sc->sc_ih == NULL) { printf(": couldn't establish interrupt"); if (intrstr != NULL) printf(" at %s", intrstr); printf("\n"); return; } printf(": %s", intrstr); if (pp->pp_plx) /* * Setup the PLX chip for level interrupts and config index 1 * XXX - should really reset the PLX chip too. */ bus_space_write_1(memt, memh, WI_PLX_COR_OFFSET, WI_PLX_COR_VALUE); else { bus_space_write_2(iot, ioh, WI_PCI_COR, WI_PCI_SOFT_RESET); DELAY(100*1000); /* 100 m sec */ bus_space_write_2(iot, ioh, WI_PCI_COR, 0x0); DELAY(100*1000); /* 100 m sec */ } wi_attach(sc, 1); }