/* $OpenBSD: if_wpi.c,v 1.32 2006/09/18 16:20:20 damien Exp $ */ /*- * Copyright (c) 2006 * Damien Bergamini * * Permission to use, copy, modify, and distribute this software for any * purpose with or without fee is hereby granted, provided that the above * copyright notice and this permission notice appear in all copies. * * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. */ /* * Driver for Intel PRO/Wireless 3945ABG 802.11 network adapters. */ #include "bpfilter.h" #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #if NBPFILTER > 0 #include #endif #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include const struct pci_matchid wpi_devices[] = { { PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_PRO_WL_3945ABG_1 }, { PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_PRO_WL_3945ABG_2 } }; /* * Supported rates for 802.11a/b/g modes (in 500Kbps unit). */ static const struct ieee80211_rateset wpi_rateset_11a = { 8, { 12, 18, 24, 36, 48, 72, 96, 108 } }; static const struct ieee80211_rateset wpi_rateset_11b = { 4, { 2, 4, 11, 22 } }; static const struct ieee80211_rateset wpi_rateset_11g = { 12, { 2, 4, 11, 22, 12, 18, 24, 36, 48, 72, 96, 108 } }; static const uint8_t wpi_ridx_to_plcp[] = { 0xd, 0xf, 0x5, 0x7, 0x9, 0xb, 0x1, 0x3, /* OFDM R1-R4 */ 10, 20, 55, 110 /* CCK */ }; int wpi_match(struct device *, void *, void *); void wpi_attach(struct device *, struct device *, void *); int wpi_detach(struct device *, int); void wpi_power(int, void *); int wpi_dma_contig_alloc(struct wpi_softc *, struct wpi_dma_info *, void **, bus_size_t, bus_size_t, int); void wpi_dma_contig_free(struct wpi_softc *, struct wpi_dma_info *); int wpi_alloc_shared(struct wpi_softc *); void wpi_free_shared(struct wpi_softc *); struct wpi_rbuf *wpi_alloc_rbuf(struct wpi_softc *); void wpi_free_rbuf(caddr_t, u_int, void *); int wpi_alloc_rpool(struct wpi_softc *); void wpi_free_rpool(struct wpi_softc *); int wpi_alloc_rx_ring(struct wpi_softc *, struct wpi_rx_ring *); void wpi_reset_rx_ring(struct wpi_softc *, struct wpi_rx_ring *); void wpi_free_rx_ring(struct wpi_softc *, struct wpi_rx_ring *); int wpi_alloc_tx_ring(struct wpi_softc *, struct wpi_tx_ring *, int, int); void wpi_reset_tx_ring(struct wpi_softc *, struct wpi_tx_ring *); void wpi_free_tx_ring(struct wpi_softc *, struct wpi_tx_ring *); struct ieee80211_node *wpi_node_alloc(struct ieee80211com *); int wpi_media_change(struct ifnet *); int wpi_newstate(struct ieee80211com *, enum ieee80211_state, int); void wpi_mem_lock(struct wpi_softc *); void wpi_mem_unlock(struct wpi_softc *); uint32_t wpi_mem_read(struct wpi_softc *, uint16_t); void wpi_mem_write(struct wpi_softc *, uint16_t, uint32_t); void wpi_mem_write_region_4(struct wpi_softc *, uint16_t, const uint32_t *, int); uint16_t wpi_read_prom_word(struct wpi_softc *, uint32_t); int wpi_load_microcode(struct wpi_softc *, const char *, int); int wpi_load_firmware_block(struct wpi_softc *, uint32_t, bus_dma_segment_t *); int wpi_load_firmware(struct wpi_softc *, uint32_t, const char *, int); void wpi_rx_intr(struct wpi_softc *, struct wpi_rx_desc *, struct wpi_rx_data *); void wpi_tx_intr(struct wpi_softc *, struct wpi_rx_desc *); void wpi_cmd_intr(struct wpi_softc *, struct wpi_rx_desc *); void wpi_notif_intr(struct wpi_softc *); int wpi_intr(void *); void wpi_read_eeprom(struct wpi_softc *); uint8_t wpi_plcp_signal(int); int wpi_tx_data(struct wpi_softc *, struct mbuf *, struct ieee80211_node *, int); void wpi_start(struct ifnet *); void wpi_watchdog(struct ifnet *); int wpi_ioctl(struct ifnet *, u_long, caddr_t); int wpi_cmd(struct wpi_softc *, int, const void *, int, int); int wpi_mrr_setup(struct wpi_softc *); void wpi_set_led(struct wpi_softc *, uint8_t, uint8_t, uint8_t); void wpi_enable_tsf(struct wpi_softc *, struct ieee80211_node *); int wpi_setup_beacon(struct wpi_softc *, struct ieee80211_node *); int wpi_auth(struct wpi_softc *); int wpi_scan(struct wpi_softc *, uint16_t); int wpi_config(struct wpi_softc *); void wpi_stop_master(struct wpi_softc *); int wpi_power_up(struct wpi_softc *); int wpi_reset(struct wpi_softc *); void wpi_hw_config(struct wpi_softc *); int wpi_init(struct ifnet *); void wpi_stop(struct ifnet *, int); void wpi_iter_func(void *, struct ieee80211_node *); void wpi_amrr_timeout(void *); void wpi_newassoc(struct ieee80211com *, struct ieee80211_node *, int); #ifdef WPI_DEBUG #define DPRINTF(x) do { if (wpi_debug > 0) printf x; } while (0) #define DPRINTFN(n, x) do { if (wpi_debug >= (n)) printf x; } while (0) int wpi_debug = 1; #else #define DPRINTF(x) #define DPRINTFN(n, x) #endif struct cfattach wpi_ca = { sizeof (struct wpi_softc), wpi_match, wpi_attach, wpi_detach }; int wpi_match(struct device *parent, void *match, void *aux) { return pci_matchbyid((struct pci_attach_args *)aux, wpi_devices, sizeof (wpi_devices) / sizeof (wpi_devices[0])); } /* Base Address Register */ #define WPI_PCI_BAR0 0x10 void wpi_attach(struct device *parent, struct device *self, void *aux) { struct wpi_softc *sc = (struct wpi_softc *)self; struct ieee80211com *ic = &sc->sc_ic; struct ifnet *ifp = &ic->ic_if; struct pci_attach_args *pa = aux; const char *intrstr; bus_space_tag_t memt; bus_space_handle_t memh; pci_intr_handle_t ih; pcireg_t data; int i, ac, error; sc->sc_pct = pa->pa_pc; sc->sc_pcitag = pa->pa_tag; /* clear device specific PCI configuration register 0x41 */ data = pci_conf_read(sc->sc_pct, sc->sc_pcitag, 0x40); data &= ~0x0000ff00; pci_conf_write(sc->sc_pct, sc->sc_pcitag, 0x40, data); /* map the register window */ error = pci_mapreg_map(pa, WPI_PCI_BAR0, PCI_MAPREG_TYPE_MEM | PCI_MAPREG_MEM_TYPE_32BIT, 0, &memt, &memh, NULL, &sc->sc_sz, 0); if (error != 0) { printf(": could not map memory space\n"); return; } sc->sc_st = memt; sc->sc_sh = memh; sc->sc_dmat = pa->pa_dmat; if (pci_intr_map(pa, &ih) != 0) { printf(": could not map interrupt\n"); return; } intrstr = pci_intr_string(sc->sc_pct, ih); sc->sc_ih = pci_intr_establish(sc->sc_pct, ih, IPL_NET, wpi_intr, sc, sc->sc_dev.dv_xname); if (sc->sc_ih == NULL) { printf(": could not establish interrupt"); if (intrstr != NULL) printf(" at %s", intrstr); printf("\n"); return; } printf(": %s", intrstr); /* * Put adapter into a known state. */ if ((error = wpi_reset(sc)) != 0) { printf(": could not reset adapter\n"); return; } /* * Allocate shared page and Tx/Rx rings. */ if ((error = wpi_alloc_shared(sc)) != 0) { printf(": could not allocate shared area\n"); return; } if ((error = wpi_alloc_rpool(sc)) != 0) { printf(": could not allocate Rx buffers\n"); goto fail1; } for (ac = 0; ac < 4; ac++) { error = wpi_alloc_tx_ring(sc, &sc->txq[ac], WPI_TX_RING_COUNT, ac); if (error != 0) { printf(": could not allocate Tx ring %d\n", ac); goto fail2; } } error = wpi_alloc_tx_ring(sc, &sc->cmdq, WPI_CMD_RING_COUNT, 4); if (error != 0) { printf(": could not allocate command ring\n"); goto fail2; } error = wpi_alloc_tx_ring(sc, &sc->svcq, WPI_SVC_RING_COUNT, 5); if (error != 0) { printf(": could not allocate service ring\n"); goto fail3; } error = wpi_alloc_rx_ring(sc, &sc->rxq); if (error != 0) { printf(": could not allocate Rx ring\n"); goto fail4; } ic->ic_phytype = IEEE80211_T_OFDM; /* not only, but not used */ ic->ic_opmode = IEEE80211_M_STA; /* default to BSS mode */ ic->ic_state = IEEE80211_S_INIT; /* set device capabilities */ ic->ic_caps = IEEE80211_C_WEP | /* s/w WEP */ IEEE80211_C_MONITOR | /* monitor mode supported */ IEEE80211_C_TXPMGT | /* tx power management */ IEEE80211_C_SHSLOT | /* short slot time supported */ IEEE80211_C_SHPREAMBLE; /* short preamble supported */ wpi_read_eeprom(sc); printf(", address %s\n", ether_sprintf(ic->ic_myaddr)); /* set supported .11a rates */ ic->ic_sup_rates[IEEE80211_MODE_11A] = wpi_rateset_11a; /* set supported .11a channels */ for (i = 36; i <= 64; i += 4) { ic->ic_channels[i].ic_freq = ieee80211_ieee2mhz(i, IEEE80211_CHAN_5GHZ); ic->ic_channels[i].ic_flags = IEEE80211_CHAN_A; } for (i = 100; i <= 140; i += 4) { ic->ic_channels[i].ic_freq = ieee80211_ieee2mhz(i, IEEE80211_CHAN_5GHZ); ic->ic_channels[i].ic_flags = IEEE80211_CHAN_A; } for (i = 149; i <= 165; i += 4) { ic->ic_channels[i].ic_freq = ieee80211_ieee2mhz(i, IEEE80211_CHAN_5GHZ); ic->ic_channels[i].ic_flags = IEEE80211_CHAN_A; } /* set supported .11b and .11g rates */ ic->ic_sup_rates[IEEE80211_MODE_11B] = wpi_rateset_11b; ic->ic_sup_rates[IEEE80211_MODE_11G] = wpi_rateset_11g; /* set supported .11b and .11g channels (1 through 14) */ for (i = 1; i <= 14; i++) { ic->ic_channels[i].ic_freq = ieee80211_ieee2mhz(i, IEEE80211_CHAN_2GHZ); ic->ic_channels[i].ic_flags = IEEE80211_CHAN_CCK | IEEE80211_CHAN_OFDM | IEEE80211_CHAN_DYN | IEEE80211_CHAN_2GHZ; } /* IBSS channel undefined for now */ ic->ic_ibss_chan = &ic->ic_channels[0]; ifp->if_softc = sc; ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST; ifp->if_init = wpi_init; ifp->if_ioctl = wpi_ioctl; ifp->if_start = wpi_start; ifp->if_watchdog = wpi_watchdog; IFQ_SET_READY(&ifp->if_snd); bcopy(sc->sc_dev.dv_xname, ifp->if_xname, IFNAMSIZ); if_attach(ifp); ieee80211_ifattach(ifp); ic->ic_node_alloc = wpi_node_alloc; ic->ic_newassoc = wpi_newassoc; /* override state transition machine */ sc->sc_newstate = ic->ic_newstate; ic->ic_newstate = wpi_newstate; ieee80211_media_init(ifp, wpi_media_change, ieee80211_media_status); sc->amrr.amrr_min_success_threshold = 1; sc->amrr.amrr_max_success_threshold = 15; timeout_set(&sc->amrr_ch, wpi_amrr_timeout, sc); sc->powerhook = powerhook_establish(wpi_power, sc); #if NBPFILTER > 0 bpfattach(&sc->sc_drvbpf, ifp, DLT_IEEE802_11_RADIO, sizeof (struct ieee80211_frame) + IEEE80211_RADIOTAP_HDRLEN); sc->sc_rxtap_len = sizeof sc->sc_rxtapu; sc->sc_rxtap.wr_ihdr.it_len = htole16(sc->sc_rxtap_len); sc->sc_rxtap.wr_ihdr.it_present = htole32(WPI_RX_RADIOTAP_PRESENT); sc->sc_txtap_len = sizeof sc->sc_txtapu; sc->sc_txtap.wt_ihdr.it_len = htole16(sc->sc_txtap_len); sc->sc_txtap.wt_ihdr.it_present = htole32(WPI_TX_RADIOTAP_PRESENT); #endif return; fail4: wpi_free_tx_ring(sc, &sc->svcq); fail3: wpi_free_tx_ring(sc, &sc->cmdq); fail2: while (--ac >= 0) wpi_free_tx_ring(sc, &sc->txq[ac]); wpi_free_rpool(sc); fail1: wpi_free_shared(sc); } int wpi_detach(struct device *self, int flags) { struct wpi_softc *sc = (struct wpi_softc *)self; struct ifnet *ifp = &sc->sc_ic.ic_if; int ac; wpi_stop(ifp, 1); ieee80211_ifdetach(ifp); if_detach(ifp); for (ac = 0; ac < 4; ac++) wpi_free_tx_ring(sc, &sc->txq[ac]); wpi_free_tx_ring(sc, &sc->cmdq); wpi_free_tx_ring(sc, &sc->svcq); wpi_free_rx_ring(sc, &sc->rxq); wpi_free_rpool(sc); wpi_free_shared(sc); if (sc->sc_ih != NULL) { pci_intr_disestablish(sc->sc_pct, sc->sc_ih); sc->sc_ih = NULL; } bus_space_unmap(sc->sc_st, sc->sc_sh, sc->sc_sz); return 0; } void wpi_power(int why, void *arg) { struct wpi_softc *sc = arg; struct ifnet *ifp; pcireg_t data; int s; if (why != PWR_RESUME) return; /* clear device specific PCI configuration register 0x41 */ data = pci_conf_read(sc->sc_pct, sc->sc_pcitag, 0x40); data &= ~0x0000ff00; pci_conf_write(sc->sc_pct, sc->sc_pcitag, 0x40, data); s = splnet(); ifp = &sc->sc_ic.ic_if; if (ifp->if_flags & IFF_UP) { ifp->if_init(ifp); if (ifp->if_flags & IFF_RUNNING) ifp->if_start(ifp); } splx(s); } int wpi_dma_contig_alloc(struct wpi_softc *sc, struct wpi_dma_info *dma, void **kvap, bus_size_t size, bus_size_t alignment, int flags) { int nsegs, error; dma->size = size; error = bus_dmamap_create(sc->sc_dmat, size, 1, size, 0, flags, &dma->map); if (error != 0) { printf("%s: could not create DMA map\n", sc->sc_dev.dv_xname); goto fail; } error = bus_dmamem_alloc(sc->sc_dmat, size, alignment, 0, &dma->seg, 1, &nsegs, flags); if (error != 0) { printf("%s: could not allocate DMA memory\n", sc->sc_dev.dv_xname); goto fail; } error = bus_dmamem_map(sc->sc_dmat, &dma->seg, 1, size, &dma->vaddr, flags); if (error != 0) { printf("%s: could not map DMA memory\n", sc->sc_dev.dv_xname); goto fail; } error = bus_dmamap_load_raw(sc->sc_dmat, dma->map, &dma->seg, 1, size, flags); if (error != 0) { printf("%s: could not load DMA memory\n", sc->sc_dev.dv_xname); goto fail; } bzero(dma->vaddr, size); dma->paddr = dma->map->dm_segs[0].ds_addr; if (kvap != NULL) *kvap = dma->vaddr; return 0; fail: wpi_dma_contig_free(sc, dma); return error; } void wpi_dma_contig_free(struct wpi_softc *sc, struct wpi_dma_info *dma) { if (dma->map != NULL) { if (dma->vaddr != NULL) { bus_dmamap_unload(sc->sc_dmat, dma->map); bus_dmamem_unmap(sc->sc_dmat, dma->vaddr, dma->size); bus_dmamem_free(sc->sc_dmat, &dma->seg, 1); dma->vaddr = NULL; } bus_dmamap_destroy(sc->sc_dmat, dma->map); dma->map = NULL; } } /* * Allocate a shared page between host and NIC. */ int wpi_alloc_shared(struct wpi_softc *sc) { int error; /* must be aligned on a 4K-page boundary */ error = wpi_dma_contig_alloc(sc, &sc->shared_dma, (void **)&sc->shared, sizeof (struct wpi_shared), PAGE_SIZE, BUS_DMA_NOWAIT); if (error != 0) { printf("%s: could not allocate shared area DMA memory\n", sc->sc_dev.dv_xname); } return error; } void wpi_free_shared(struct wpi_softc *sc) { wpi_dma_contig_free(sc, &sc->shared_dma); } struct wpi_rbuf * wpi_alloc_rbuf(struct wpi_softc *sc) { struct wpi_rbuf *rbuf; rbuf = SLIST_FIRST(&sc->rxq.freelist); if (rbuf == NULL) return NULL; SLIST_REMOVE_HEAD(&sc->rxq.freelist, next); return rbuf; } /* * This is called automatically by the network stack when the mbuf to which our * Rx buffer is attached is freed. */ void wpi_free_rbuf(caddr_t buf, u_int size, void *arg) { struct wpi_rbuf *rbuf = arg; struct wpi_softc *sc = rbuf->sc; /* put the buffer back in the free list */ SLIST_INSERT_HEAD(&sc->rxq.freelist, rbuf, next); } int wpi_alloc_rpool(struct wpi_softc *sc) { struct wpi_rx_ring *ring = &sc->rxq; struct wpi_rbuf *rbuf; int i, error; /* allocate a big chunk of DMA'able memory.. */ error = wpi_dma_contig_alloc(sc, &ring->buf_dma, NULL, WPI_RBUF_COUNT * WPI_RBUF_SIZE, PAGE_SIZE, BUS_DMA_NOWAIT); if (error != 0) { printf("%s: could not allocate Rx buffers DMA memory\n", sc->sc_dev.dv_xname); return error; } /* ..and split it into 3KB chunks */ SLIST_INIT(&ring->freelist); for (i = 0; i < WPI_RBUF_COUNT; i++) { rbuf = &ring->rbuf[i]; rbuf->sc = sc; /* backpointer for callbacks */ rbuf->vaddr = ring->buf_dma.vaddr + i * WPI_RBUF_SIZE; rbuf->paddr = ring->buf_dma.paddr + i * WPI_RBUF_SIZE; SLIST_INSERT_HEAD(&ring->freelist, rbuf, next); } return 0; } void wpi_free_rpool(struct wpi_softc *sc) { wpi_dma_contig_free(sc, &sc->rxq.buf_dma); } int wpi_alloc_rx_ring(struct wpi_softc *sc, struct wpi_rx_ring *ring) { struct wpi_rx_data *data; struct wpi_rbuf *rbuf; int i, error; ring->cur = 0; error = wpi_dma_contig_alloc(sc, &ring->desc_dma, (void **)&ring->desc, WPI_RX_RING_COUNT * sizeof (struct wpi_rx_desc), WPI_RING_DMA_ALIGN, BUS_DMA_NOWAIT); if (error != 0) { printf("%s: could not allocate rx ring DMA memory\n", sc->sc_dev.dv_xname); goto fail; } /* * Setup Rx buffers. */ for (i = 0; i < WPI_RX_RING_COUNT; i++) { data = &ring->data[i]; MGETHDR(data->m, M_DONTWAIT, MT_DATA); if (data->m == NULL) { printf("%s: could not allocate rx mbuf\n", sc->sc_dev.dv_xname); error = ENOMEM; goto fail; } if ((rbuf = wpi_alloc_rbuf(sc)) == NULL) { m_freem(data->m); data->m = NULL; printf("%s: could not allocate rx buffer\n", sc->sc_dev.dv_xname); error = ENOMEM; goto fail; } /* attach Rx buffer to mbuf */ MEXTADD(data->m, rbuf->vaddr, WPI_RBUF_SIZE, 0, wpi_free_rbuf, rbuf); ring->desc[i] = htole32(rbuf->paddr); } return 0; fail: wpi_free_rx_ring(sc, ring); return error; } void wpi_reset_rx_ring(struct wpi_softc *sc, struct wpi_rx_ring *ring) { int ntries; wpi_mem_lock(sc); WPI_WRITE(sc, WPI_RX_CONFIG, 0); for (ntries = 0; ntries < 100; ntries++) { if (WPI_READ(sc, WPI_RX_STATUS) & WPI_RX_IDLE) break; DELAY(10); } #ifdef WPI_DEBUG if (ntries == 100 && wpi_debug > 0) printf("%s: timeout resetting Rx ring\n", sc->sc_dev.dv_xname); #endif wpi_mem_unlock(sc); ring->cur = 0; } void wpi_free_rx_ring(struct wpi_softc *sc, struct wpi_rx_ring *ring) { int i; wpi_dma_contig_free(sc, &ring->desc_dma); for (i = 0; i < WPI_RX_RING_COUNT; i++) { if (ring->data[i].m != NULL) m_freem(ring->data[i].m); } } int wpi_alloc_tx_ring(struct wpi_softc *sc, struct wpi_tx_ring *ring, int count, int qid) { struct wpi_tx_data *data; int i, error; ring->qid = qid; ring->count = count; ring->queued = 0; ring->cur = 0; error = wpi_dma_contig_alloc(sc, &ring->desc_dma, (void **)&ring->desc, count * sizeof (struct wpi_tx_desc), WPI_RING_DMA_ALIGN, BUS_DMA_NOWAIT); if (error != 0) { printf("%s: could not allocate tx ring DMA memory\n", sc->sc_dev.dv_xname); goto fail; } /* update shared page with ring's base address */ sc->shared->txbase[qid] = htole32(ring->desc_dma.paddr); error = wpi_dma_contig_alloc(sc, &ring->cmd_dma, (void **)&ring->cmd, count * sizeof (struct wpi_tx_cmd), 4, BUS_DMA_NOWAIT); if (error != 0) { printf("%s: could not allocate tx cmd DMA memory\n", sc->sc_dev.dv_xname); goto fail; } ring->data = malloc(count * sizeof (struct wpi_tx_data), M_DEVBUF, M_NOWAIT); if (ring->data == NULL) { printf("%s: could not allocate tx data slots\n", sc->sc_dev.dv_xname); goto fail; } bzero(ring->data, count * sizeof (struct wpi_tx_data)); for (i = 0; i < count; i++) { data = &ring->data[i]; error = bus_dmamap_create(sc->sc_dmat, MCLBYTES, WPI_MAX_SCATTER - 1, MCLBYTES, 0, BUS_DMA_NOWAIT, &data->map); if (error != 0) { printf("%s: could not create tx buf DMA map\n", sc->sc_dev.dv_xname); goto fail; } } return 0; fail: wpi_free_tx_ring(sc, ring); return error; } void wpi_reset_tx_ring(struct wpi_softc *sc, struct wpi_tx_ring *ring) { struct wpi_tx_data *data; int i, ntries; wpi_mem_lock(sc); WPI_WRITE(sc, WPI_TX_CONFIG(ring->qid), 0); for (ntries = 0; ntries < 100; ntries++) { if (WPI_READ(sc, WPI_TX_STATUS) & WPI_TX_IDLE(ring->qid)) break; DELAY(10); } #ifdef WPI_DEBUG if (ntries == 100 && wpi_debug > 0) { printf("%s: timeout resetting Tx ring %d\n", sc->sc_dev.dv_xname, ring->qid); } #endif wpi_mem_unlock(sc); for (i = 0; i < ring->count; i++) { data = &ring->data[i]; if (data->m != NULL) { bus_dmamap_unload(sc->sc_dmat, data->map); m_freem(data->m); data->m = NULL; } } ring->queued = 0; ring->cur = 0; } void wpi_free_tx_ring(struct wpi_softc *sc, struct wpi_tx_ring *ring) { struct wpi_tx_data *data; int i; wpi_dma_contig_free(sc, &ring->desc_dma); wpi_dma_contig_free(sc, &ring->cmd_dma); if (ring->data != NULL) { for (i = 0; i < ring->count; i++) { data = &ring->data[i]; if (data->m != NULL) { bus_dmamap_unload(sc->sc_dmat, data->map); m_freem(data->m); } } free(ring->data, M_DEVBUF); } } struct ieee80211_node * wpi_node_alloc(struct ieee80211com *ic) { struct wpi_node *wn; wn = malloc(sizeof (struct wpi_node), M_DEVBUF, M_NOWAIT); if (wn != NULL) bzero(wn, sizeof (struct wpi_node)); return (struct ieee80211_node *)wn; } int wpi_media_change(struct ifnet *ifp) { int error; error = ieee80211_media_change(ifp); if (error != ENETRESET) return error; if ((ifp->if_flags & (IFF_UP | IFF_RUNNING)) == (IFF_UP | IFF_RUNNING)) wpi_init(ifp); return 0; } int wpi_newstate(struct ieee80211com *ic, enum ieee80211_state nstate, int arg) { struct ifnet *ifp = &ic->ic_if; struct wpi_softc *sc = ifp->if_softc; int error; timeout_del(&sc->amrr_ch); switch (nstate) { case IEEE80211_S_SCAN: /* make the link LED blink while we're scanning */ wpi_set_led(sc, WPI_LED_LINK, 20, 2); if ((error = wpi_scan(sc, IEEE80211_CHAN_G)) != 0) { printf("%s: could not initiate scan\n", sc->sc_dev.dv_xname); return error; } ic->ic_state = nstate; return 0; case IEEE80211_S_AUTH: /* reset state to handle reassociations correctly */ sc->config.state = 0; sc->config.filter &= ~htole32(WPI_FILTER_BSS); if ((error = wpi_auth(sc)) != 0) { printf("%s: could not send authentication request\n", sc->sc_dev.dv_xname); return error; } break; case IEEE80211_S_RUN: if (ic->ic_opmode == IEEE80211_M_MONITOR) { /* link LED blinks while monitoring */ wpi_set_led(sc, WPI_LED_LINK, 5, 5); break; } wpi_enable_tsf(sc, ic->ic_bss); /* update adapter's configuration */ sc->config.state = htole16(WPI_STATE_ASSOCIATED); /* short preamble/slot time are negotiated when associating */ sc->config.flags &= ~htole32(WPI_CONFIG_SHPREAMBLE | WPI_CONFIG_SHSLOT); if (ic->ic_flags & IEEE80211_F_SHSLOT) sc->config.flags |= htole32(WPI_CONFIG_SHSLOT); if (ic->ic_flags & IEEE80211_F_SHPREAMBLE) sc->config.flags |= htole32(WPI_CONFIG_SHPREAMBLE); sc->config.filter |= htole32(WPI_FILTER_BSS); DPRINTF(("config chan %d flags %x\n", sc->config.chan, sc->config.flags)); error = wpi_cmd(sc, WPI_CMD_CONFIGURE, &sc->config, sizeof (struct wpi_config), 1); if (error != 0) { printf("%s: could not update configuration\n", sc->sc_dev.dv_xname); return error; } if (ic->ic_opmode == IEEE80211_M_STA) { /* fake a join to init the tx rate */ wpi_newassoc(ic, ic->ic_bss, 1); } /* start automatic rate control timer */ if (ic->ic_fixed_rate == -1) timeout_add(&sc->amrr_ch, hz / 2); /* link LED always on while associated */ wpi_set_led(sc, WPI_LED_LINK, 0, 1); break; case IEEE80211_S_ASSOC: case IEEE80211_S_INIT: break; } return sc->sc_newstate(ic, nstate, arg); } /* * Grab exclusive access to NIC memory. */ void wpi_mem_lock(struct wpi_softc *sc) { uint32_t tmp; int ntries; tmp = WPI_READ(sc, WPI_GPIO_CTL); WPI_WRITE(sc, WPI_GPIO_CTL, tmp | WPI_GPIO_MAC); /* spin until we actually get the lock */ for (ntries = 0; ntries < 1000; ntries++) { if ((WPI_READ(sc, WPI_GPIO_CTL) & (WPI_GPIO_CLOCK | WPI_GPIO_SLEEP)) == WPI_GPIO_CLOCK) break; DELAY(10); } if (ntries == 1000) printf("%s: could not lock memory\n", sc->sc_dev.dv_xname); } /* * Release lock on NIC memory. */ void wpi_mem_unlock(struct wpi_softc *sc) { uint32_t tmp = WPI_READ(sc, WPI_GPIO_CTL); WPI_WRITE(sc, WPI_GPIO_CTL, tmp & ~WPI_GPIO_MAC); } uint32_t wpi_mem_read(struct wpi_softc *sc, uint16_t addr) { WPI_WRITE(sc, WPI_READ_MEM_ADDR, WPI_MEM_4 | addr); return WPI_READ(sc, WPI_READ_MEM_DATA); } void wpi_mem_write(struct wpi_softc *sc, uint16_t addr, uint32_t data) { WPI_WRITE(sc, WPI_WRITE_MEM_ADDR, WPI_MEM_4 | addr); WPI_WRITE(sc, WPI_WRITE_MEM_DATA, data); } void wpi_mem_write_region_4(struct wpi_softc *sc, uint16_t addr, const uint32_t *data, int wlen) { for (; wlen > 0; wlen--, data++, addr += 4) wpi_mem_write(sc, addr, *data); } /* * Read 16 bits from the EEPROM. We access EEPROM through the MAC instead of * using the traditional bit-bang method. */ uint16_t wpi_read_prom_word(struct wpi_softc *sc, uint32_t addr) { int ntries; uint32_t val; WPI_WRITE(sc, WPI_EEPROM_CTL, addr << 2); wpi_mem_lock(sc); for (ntries = 0; ntries < 10; ntries++) { if ((val = WPI_READ(sc, WPI_EEPROM_CTL)) & WPI_EEPROM_READY) break; DELAY(10); } wpi_mem_unlock(sc); if (ntries == 10) { printf("%s: could not read EEPROM\n", sc->sc_dev.dv_xname); return 0xdead; } return val >> 16; } /* * The firmware boot code is small and is intended to be copied directly into * the NIC internal memory. */ int wpi_load_microcode(struct wpi_softc *sc, const char *ucode, int size) { /* check that microcode size is a multiple of 4 */ if (size & 3) return EINVAL; size /= sizeof (uint32_t); wpi_mem_lock(sc); /* copy microcode image into NIC memory */ wpi_mem_write_region_4(sc, WPI_MEM_UCODE_BASE, (const uint32_t *)ucode, size); wpi_mem_write(sc, WPI_MEM_UCODE_SRC, 0); wpi_mem_write(sc, WPI_MEM_UCODE_DST, WPI_FW_TEXT); wpi_mem_write(sc, WPI_MEM_UCODE_SIZE, size); /* run microcode */ wpi_mem_write(sc, WPI_MEM_UCODE_CTL, WPI_UC_RUN); wpi_mem_unlock(sc); return 0; } int wpi_load_firmware_block(struct wpi_softc *sc, uint32_t target, bus_dma_segment_t *seg) { struct wpi_tx_desc desc; int ntries, error = 0; DPRINTFN(2, ("loading firmware block target=%x addr=%x len=%d\n", target, seg->ds_addr, seg->ds_len)); bzero(&desc, sizeof desc); desc.flags = htole32(WPI_PAD32(seg->ds_len) << 28 | 1 << 24); desc.segs[0].addr = htole32(seg->ds_addr); desc.segs[0].len = htole32(seg->ds_len); /* tell adapter where to copy firmware block in its internal memory */ WPI_WRITE(sc, WPI_FW_TARGET, target); WPI_WRITE(sc, WPI_TX_CONFIG(6), 0); /* copy firmware block descriptor into NIC memory */ WPI_WRITE_REGION_4(sc, WPI_TX_DESC(6), (uint32_t *)&desc, sizeof desc / sizeof (uint32_t)); WPI_WRITE(sc, WPI_TX_CREDIT(6), 0xfffff); WPI_WRITE(sc, WPI_TX_STATE(6), 0x4001); WPI_WRITE(sc, WPI_TX_CONFIG(6), 0x80000001); /* wait while the adapter is busy copying the firmware block */ for (ntries = 0; ntries < 100; ntries++) { if (WPI_READ(sc, WPI_TX_STATUS) & WPI_TX_IDLE(6)) break; DELAY(1000); } if (ntries == 100) { printf("%s: timeout transferring firmware block\n", sc->sc_dev.dv_xname); error = ETIMEDOUT; } WPI_WRITE(sc, WPI_TX_CREDIT(6), 0); return error; } /* * The firmware text and data segments are transferred to the NIC using DMA. * The driver just DMA-maps the firmware and tells the NIC where to find it. * Once the NIC has copied the firmware into its internal memory, we can free * our local copy in the driver. */ int wpi_load_firmware(struct wpi_softc *sc, uint32_t target, const char *fw, int size) { bus_dmamap_t map; int i, nsegs, error; nsegs = 1 + ((size + PAGE_SIZE - 1) / PAGE_SIZE); error = bus_dmamap_create(sc->sc_dmat, size, nsegs, WPI_MAX_SEG_LEN, 0, BUS_DMA_NOWAIT, &map); if (error != 0) { printf("%s: could not create firmware DMA map (error=%d)\n", sc->sc_dev.dv_xname, error); goto fail1; } /* XXX: we're discarding a const qualifier here! */ error = bus_dmamap_load(sc->sc_dmat, map, (void *)fw, size, NULL, BUS_DMA_NOWAIT | BUS_DMA_WRITE); if (error != 0) { printf("%s: could not load firmware DMA map (error=%d)\n", sc->sc_dev.dv_xname, error); goto fail2; } DPRINTF(("load firmware target=%x size=%d nsegs=%d\n", target, size, map->dm_nsegs)); /* make sure the adapter will get up-to-date values */ bus_dmamap_sync(sc->sc_dmat, map, 0, size, BUS_DMASYNC_PREWRITE); wpi_mem_lock(sc); for (i = 0; i < map->dm_nsegs; i++) { error = wpi_load_firmware_block(sc, target, &map->dm_segs[i]); if (error != 0) break; target += map->dm_segs[i].ds_len; } wpi_mem_unlock(sc); bus_dmamap_sync(sc->sc_dmat, map, 0, size, BUS_DMASYNC_POSTWRITE); bus_dmamap_unload(sc->sc_dmat, map); fail2: bus_dmamap_destroy(sc->sc_dmat, map); fail1: return error; } void wpi_rx_intr(struct wpi_softc *sc, struct wpi_rx_desc *desc, struct wpi_rx_data *data) { struct ieee80211com *ic = &sc->sc_ic; struct ifnet *ifp = &ic->ic_if; struct wpi_rx_ring *ring = &sc->rxq; struct wpi_rx_stat *stat; struct wpi_rx_head *head; struct wpi_rx_tail *tail; struct wpi_rbuf *rbuf; struct ieee80211_frame *wh; struct ieee80211_node *ni; struct mbuf *m, *mnew; stat = (struct wpi_rx_stat *)(desc + 1); if (stat->len > WPI_STAT_MAXLEN) { printf("%s: invalid rx statistic header\n", sc->sc_dev.dv_xname); ifp->if_ierrors++; return; } head = (struct wpi_rx_head *)((caddr_t)(stat + 1) + stat->len); tail = (struct wpi_rx_tail *)((caddr_t)(head + 1) + letoh16(head->len)); DPRINTFN(4, ("rx intr: idx=%d len=%d stat len=%d rssi=%d rate=%x " "chan=%d tstamp=%llu\n", ring->cur, letoh32(desc->len), letoh16(head->len), (int8_t)stat->rssi, head->rate, head->chan, letoh64(tail->tstamp))); /* * Discard Rx frames with bad CRC early (XXX we may want to pass them * to radiotap in monitor mode). */ if ((letoh32(tail->flags) & WPI_RX_NOERROR) != WPI_RX_NOERROR) { DPRINTFN(2, ("rx tail flags error %x\n", letoh32(tail->flags))); ifp->if_ierrors++; return; } MGETHDR(mnew, M_DONTWAIT, MT_DATA); if (mnew == NULL) { ifp->if_ierrors++; return; } if ((rbuf = wpi_alloc_rbuf(sc)) == NULL) { m_freem(mnew); ifp->if_ierrors++; return; } /* attach Rx buffer to mbuf */ MEXTADD(mnew, rbuf->vaddr, WPI_RBUF_SIZE, 0, wpi_free_rbuf, rbuf); m = data->m; data->m = mnew; /* update Rx descriptor */ ring->desc[ring->cur] = htole32(rbuf->paddr); /* finalize mbuf */ m->m_pkthdr.rcvif = ifp; m->m_data = (caddr_t)(head + 1); m->m_pkthdr.len = m->m_len = letoh16(head->len); #if NBPFILTER > 0 if (sc->sc_drvbpf != NULL) { struct mbuf mb; struct wpi_rx_radiotap_header *tap = &sc->sc_rxtap; tap->wr_flags = 0; tap->wr_chan_freq = htole16(ic->ic_channels[head->chan].ic_freq); tap->wr_chan_flags = htole16(ic->ic_channels[head->chan].ic_flags); tap->wr_dbm_antsignal = (int8_t)(stat->rssi - WPI_RSSI_OFFSET); tap->wr_dbm_antnoise = (int8_t)letoh16(stat->noise); tap->wr_tsft = tail->tstamp; tap->wr_antenna = (letoh16(head->flags) >> 4) & 0xf; switch (head->rate) { /* CCK rates */ case 10: tap->wr_rate = 2; break; case 20: tap->wr_rate = 4; break; case 55: tap->wr_rate = 11; break; case 110: tap->wr_rate = 22; break; /* OFDM rates */ case 0xd: tap->wr_rate = 12; break; case 0xf: tap->wr_rate = 18; break; case 0x5: tap->wr_rate = 24; break; case 0x7: tap->wr_rate = 36; break; case 0x9: tap->wr_rate = 48; break; case 0xb: tap->wr_rate = 72; break; case 0x1: tap->wr_rate = 96; break; case 0x3: tap->wr_rate = 108; break; /* unknown rate: should not happen */ default: tap->wr_rate = 0; } if (letoh16(head->flags) & 0x4) tap->wr_flags |= IEEE80211_RADIOTAP_F_SHORTPRE; M_DUP_PKTHDR(&mb, m); mb.m_data = (caddr_t)tap; mb.m_len = sc->sc_rxtap_len; mb.m_next = m; mb.m_pkthdr.len += mb.m_len; bpf_mtap(sc->sc_drvbpf, &mb, BPF_DIRECTION_IN); } #endif /* grab a reference to the source node */ wh = mtod(m, struct ieee80211_frame *); ni = ieee80211_find_rxnode(ic, wh); /* send the frame to the 802.11 layer */ ieee80211_input(ifp, m, ni, stat->rssi, 0); /* node is no longer needed */ ieee80211_release_node(ic, ni); } void wpi_tx_intr(struct wpi_softc *sc, struct wpi_rx_desc *desc) { struct ieee80211com *ic = &sc->sc_ic; struct ifnet *ifp = &ic->ic_if; struct wpi_tx_ring *ring = &sc->txq[desc->qid & 0x3]; struct wpi_tx_data *data = &ring->data[desc->idx]; struct wpi_tx_stat *stat = (struct wpi_tx_stat *)(desc + 1); struct wpi_node *wn = (struct wpi_node *)data->ni; DPRINTFN(4, ("tx done: qid=%d idx=%d retries=%d nkill=%d rate=%x " "duration=%d status=%x\n", desc->qid, desc->idx, stat->ntries, stat->nkill, stat->rate, letoh32(stat->duration), letoh32(stat->status))); /* * Update rate control statistics for the node. * XXX we should not count mgmt frames since they're always sent at * the lowest available bit-rate. */ wn->amn.amn_txcnt++; if (stat->ntries > 0) { DPRINTFN(3, ("tx intr ntries %d\n", stat->ntries)); wn->amn.amn_retrycnt++; } if ((letoh32(stat->status) & 0xff) != 1) ifp->if_oerrors++; else ifp->if_opackets++; bus_dmamap_unload(sc->sc_dmat, data->map); m_freem(data->m); data->m = NULL; ieee80211_release_node(ic, data->ni); data->ni = NULL; ring->queued--; sc->sc_tx_timer = 0; ifp->if_flags &= ~IFF_OACTIVE; (*ifp->if_start)(ifp); } void wpi_cmd_intr(struct wpi_softc *sc, struct wpi_rx_desc *desc) { struct wpi_tx_ring *ring = &sc->cmdq; struct wpi_tx_data *data; if ((desc->qid & 7) != 4) return; /* not a command ack */ data = &ring->data[desc->idx]; /* if the command was mapped in a mbuf, free it */ if (data->m != NULL) { bus_dmamap_unload(sc->sc_dmat, data->map); m_freem(data->m); data->m = NULL; } wakeup(&ring->cmd[desc->idx]); } void wpi_notif_intr(struct wpi_softc *sc) { struct ieee80211com *ic = &sc->sc_ic; struct ifnet *ifp = &ic->ic_if; struct wpi_rx_desc *desc; struct wpi_rx_data *data; uint32_t hw; hw = letoh32(sc->shared->next); while (sc->rxq.cur != hw) { data = &sc->rxq.data[sc->rxq.cur]; desc = mtod(data->m, struct wpi_rx_desc *); DPRINTFN(4, ("rx notification qid=%x idx=%d flags=%x type=%d " "len=%d\n", desc->qid, desc->idx, desc->flags, desc->type, letoh32(desc->len))); if (!(desc->qid & 0x80)) /* reply to a command */ wpi_cmd_intr(sc, desc); switch (desc->type) { case WPI_RX_DONE: /* a 802.11 frame was received */ wpi_rx_intr(sc, desc, data); break; case WPI_TX_DONE: /* a 802.11 frame has been transmitted */ wpi_tx_intr(sc, desc); break; case WPI_UC_READY: { struct wpi_ucode_info *uc = (struct wpi_ucode_info *)(desc + 1); /* the microcontroller is ready */ DPRINTF(("microcode alive notification version %x " "alive %x\n", letoh32(uc->version), letoh32(uc->valid))); if (letoh32(uc->valid) != 1) { printf("%s: microcontroller initialization " "failed\n", sc->sc_dev.dv_xname); } break; } case WPI_STATE_CHANGED: { uint32_t *status = (uint32_t *)(desc + 1); /* enabled/disabled notification */ DPRINTF(("state changed to %x\n", letoh32(*status))); if (letoh32(*status) & 1) { /* the radio button has to be pushed */ printf("%s: Radio transmitter is off\n", sc->sc_dev.dv_xname); /* turn the interface down */ ifp->if_flags &= ~IFF_UP; wpi_stop(ifp, 1); return; /* no further processing */ } break; } case WPI_START_SCAN: { struct wpi_start_scan *scan = (struct wpi_start_scan *)(desc + 1); DPRINTFN(2, ("scanning channel %d status %x\n", scan->chan, letoh32(scan->status))); /* fix current channel */ ic->ic_bss->ni_chan = &ic->ic_channels[scan->chan]; break; } case WPI_STOP_SCAN: { struct wpi_stop_scan *scan = (struct wpi_stop_scan *)(desc + 1); DPRINTF(("scan finished nchan=%d status=%d chan=%d\n", scan->nchan, scan->status, scan->chan)); if (scan->status == 1 && scan->chan <= 14) { /* * We just finished scanning 802.11g channels, * start scanning 802.11a ones. */ if (wpi_scan(sc, IEEE80211_CHAN_A) == 0) break; } ieee80211_end_scan(ifp); break; } } sc->rxq.cur = (sc->rxq.cur + 1) % WPI_RX_RING_COUNT; } /* tell the firmware what we have processed */ hw = (hw == 0) ? WPI_RX_RING_COUNT - 1 : hw - 1; WPI_WRITE(sc, WPI_RX_WIDX, hw & ~7); } int wpi_intr(void *arg) { struct wpi_softc *sc = arg; struct ifnet *ifp = &sc->sc_ic.ic_if; uint32_t r; r = WPI_READ(sc, WPI_INTR); if (r == 0 || r == 0xffffffff) return 0; /* not for us */ DPRINTFN(6, ("interrupt reg %x\n", r)); /* disable interrupts */ WPI_WRITE(sc, WPI_MASK, 0); /* ack interrupts */ WPI_WRITE(sc, WPI_INTR, r); if (r & (WPI_SW_ERROR | WPI_HW_ERROR)) { /* SYSTEM FAILURE, SYSTEM FAILURE */ printf("%s: fatal firmware error\n", sc->sc_dev.dv_xname); ifp->if_flags &= ~IFF_UP; wpi_stop(ifp, 1); return 1; } if (r & WPI_RX_INTR) wpi_notif_intr(sc); if (r & WPI_ALIVE_INTR) /* firmware initialized */ wakeup(sc); /* re-enable interrupts */ if (ifp->if_flags & IFF_UP) WPI_WRITE(sc, WPI_MASK, WPI_INTR_MASK); return 1; } uint8_t wpi_plcp_signal(int rate) { switch (rate) { /* CCK rates (returned values are device-dependent) */ case 2: return 10; case 4: return 20; case 11: return 55; case 22: return 110; /* OFDM rates (cf IEEE Std 802.11a-1999, pp. 14 Table 80) */ /* R1-R4, (u)ral is R4-R1 */ case 12: return 0xd; case 18: return 0xf; case 24: return 0x5; case 36: return 0x7; case 48: return 0x9; case 72: return 0xb; case 96: return 0x1; case 108: return 0x3; /* unsupported rates (should not get there) */ default: return 0; } } /* quickly determine if a given rate is CCK or OFDM */ #define WPI_RATE_IS_OFDM(rate) ((rate) >= 12 && (rate) != 22) int wpi_tx_data(struct wpi_softc *sc, struct mbuf *m0, struct ieee80211_node *ni, int ac) { struct ieee80211com *ic = &sc->sc_ic; struct ifnet *ifp = &ic->ic_if; struct wpi_tx_ring *ring = &sc->txq[ac]; struct wpi_tx_desc *desc; struct wpi_tx_data *data; struct wpi_tx_cmd *cmd; struct wpi_cmd_data *tx; struct ieee80211_frame *wh; struct mbuf *mnew; int i, rate, error; desc = &ring->desc[ring->cur]; data = &ring->data[ring->cur]; wh = mtod(m0, struct ieee80211_frame *); if (wh->i_fc[1] & IEEE80211_FC1_WEP) { m0 = ieee80211_wep_crypt(ifp, m0, 1); if (m0 == NULL) return ENOBUFS; /* packet header may have moved, reset our local pointer */ wh = mtod(m0, struct ieee80211_frame *); } /* pickup a rate */ if ((wh->i_fc[0] & IEEE80211_FC0_TYPE_MASK) == IEEE80211_FC0_TYPE_MGT) { /* mgmt frames are sent at the lowest available bit-rate */ rate = ni->ni_rates.rs_rates[0]; } else { if (ic->ic_fixed_rate != -1) { rate = ic->ic_sup_rates[ic->ic_curmode]. rs_rates[ic->ic_fixed_rate]; } else rate = ni->ni_rates.rs_rates[ni->ni_txrate]; } rate &= IEEE80211_RATE_VAL; #if NBPFILTER > 0 if (sc->sc_drvbpf != NULL) { struct mbuf mb; struct wpi_tx_radiotap_header *tap = &sc->sc_txtap; tap->wt_flags = 0; tap->wt_chan_freq = htole16(ni->ni_chan->ic_freq); tap->wt_chan_flags = htole16(ni->ni_chan->ic_flags); tap->wt_rate = rate; tap->wt_hwqueue = ac; if (wh->i_fc[1] & IEEE80211_FC1_WEP) tap->wt_flags |= IEEE80211_RADIOTAP_F_WEP; M_DUP_PKTHDR(&mb, m0); mb.m_data = (caddr_t)tap; mb.m_len = sc->sc_txtap_len; mb.m_next = m0; mb.m_pkthdr.len += mb.m_len; bpf_mtap(sc->sc_drvbpf, &mb, BPF_DIRECTION_OUT); } #endif cmd = &ring->cmd[ring->cur]; cmd->code = WPI_CMD_TX_DATA; cmd->flags = 0; cmd->qid = ring->qid; cmd->idx = ring->cur; tx = (struct wpi_cmd_data *)cmd->data; tx->flags = 0; if (!IEEE80211_IS_MULTICAST(wh->i_addr1)) { tx->id = WPI_ID_BSS; tx->flags |= htole32(WPI_TX_NEED_ACK); if (m0->m_pkthdr.len + IEEE80211_CRC_LEN > ic->ic_rtsthreshold || (WPI_RATE_IS_OFDM(rate) && (ic->ic_flags & IEEE80211_F_USEPROT))) { tx->flags |= htole32(WPI_TX_NEED_RTS | WPI_TX_FULL_TXOP); } } else tx->id = WPI_ID_BROADCAST; tx->flags |= htole32(WPI_TX_AUTO_SEQ); if ((wh->i_fc[0] & IEEE80211_FC0_TYPE_MASK) == IEEE80211_FC0_TYPE_MGT) { uint8_t subtype = wh->i_fc[0] & IEEE80211_FC0_SUBTYPE_MASK; /* tell h/w to set timestamp in probe responses */ if (subtype == IEEE80211_FC0_SUBTYPE_PROBE_RESP) tx->flags |= htole32(WPI_TX_INSERT_TSTAMP); if (subtype == IEEE80211_FC0_SUBTYPE_ASSOC_REQ || subtype == IEEE80211_FC0_SUBTYPE_REASSOC_REQ) tx->timeout = htole16(3); else tx->timeout = htole16(2); } else tx->timeout = htole16(0); tx->rate = wpi_plcp_signal(rate); /* be very persistant at sending frames out */ tx->rts_ntries = 7; tx->data_ntries = 15; tx->ofdm_mask = 0xff; tx->cck_mask = 0x0f; tx->lifetime = htole32(0xffffffff); tx->len = htole16(m0->m_pkthdr.len); /* save and trim IEEE802.11 header */ m_copydata(m0, 0, sizeof (struct ieee80211_frame), (caddr_t)&tx->wh); m_adj(m0, sizeof (struct ieee80211_frame)); error = bus_dmamap_load_mbuf(sc->sc_dmat, data->map, m0, BUS_DMA_NOWAIT); if (error != 0 && error != EFBIG) { printf("%s: could not map mbuf (error %d)\n", sc->sc_dev.dv_xname, error); m_freem(m0); return error; } if (error != 0) { /* too many fragments, linearize */ MGETHDR(mnew, M_DONTWAIT, MT_DATA); if (mnew == NULL) { m_freem(m0); return ENOMEM; } M_DUP_PKTHDR(mnew, m0); if (m0->m_pkthdr.len > MHLEN) { MCLGET(mnew, M_DONTWAIT); if (!(mnew->m_flags & M_EXT)) { m_freem(m0); m_freem(mnew); return ENOMEM; } } m_copydata(m0, 0, m0->m_pkthdr.len, mtod(mnew, caddr_t)); m_freem(m0); mnew->m_len = mnew->m_pkthdr.len; m0 = mnew; error = bus_dmamap_load_mbuf(sc->sc_dmat, data->map, m0, BUS_DMA_NOWAIT); if (error != 0) { printf("%s: could not map mbuf (error %d)\n", sc->sc_dev.dv_xname, error); m_freem(m0); return error; } } data->m = m0; data->ni = ni; DPRINTFN(4, ("sending data: qid=%d idx=%d len=%d nsegs=%d\n", ring->qid, ring->cur, m0->m_pkthdr.len, data->map->dm_nsegs)); /* first scatter/gather segment is used by the tx data command */ desc->flags = htole32(WPI_PAD32(m0->m_pkthdr.len) << 28 | (1 + data->map->dm_nsegs) << 24); desc->segs[0].addr = htole32(ring->cmd_dma.paddr + ring->cur * sizeof (struct wpi_tx_cmd)); desc->segs[0].len = htole32(4 + sizeof (struct wpi_cmd_data)); for (i = 1; i <= data->map->dm_nsegs; i++) { desc->segs[i].addr = htole32(data->map->dm_segs[i - 1].ds_addr); desc->segs[i].len = htole32(data->map->dm_segs[i - 1].ds_len); } ring->queued++; /* kick ring */ ring->cur = (ring->cur + 1) % WPI_TX_RING_COUNT; WPI_WRITE(sc, WPI_TX_WIDX, ring->qid << 8 | ring->cur); return 0; } void wpi_start(struct ifnet *ifp) { struct wpi_softc *sc = ifp->if_softc; struct ieee80211com *ic = &sc->sc_ic; struct ieee80211_node *ni; struct mbuf *m0; /* * net80211 may still try to send management frames even if the * IFF_RUNNING flag is not set... */ if ((ifp->if_flags & (IFF_RUNNING | IFF_OACTIVE)) != IFF_RUNNING) return; for (;;) { IF_POLL(&ic->ic_mgtq, m0); if (m0 != NULL) { /* management frames go into ring 0 */ if (sc->txq[0].queued >= sc->txq[0].count - 8) { ifp->if_flags |= IFF_OACTIVE; break; } IF_DEQUEUE(&ic->ic_mgtq, m0); ni = (struct ieee80211_node *)m0->m_pkthdr.rcvif; m0->m_pkthdr.rcvif = NULL; #if NBPFILTER > 0 if (ic->ic_rawbpf != NULL) bpf_mtap(ic->ic_rawbpf, m0, BPF_DIRECTION_OUT); #endif if (wpi_tx_data(sc, m0, ni, 0) != 0) break; } else { if (ic->ic_state != IEEE80211_S_RUN) break; IFQ_POLL(&ifp->if_snd, m0); if (m0 == NULL) break; if (sc->txq[0].queued >= sc->txq[0].count - 8) { /* there is no place left in this ring */ ifp->if_flags |= IFF_OACTIVE; break; } IFQ_DEQUEUE(&ifp->if_snd, m0); #if NBPFILTER > 0 if (ifp->if_bpf != NULL) bpf_mtap(ifp->if_bpf, m0, BPF_DIRECTION_OUT); #endif m0 = ieee80211_encap(ifp, m0, &ni); if (m0 == NULL) continue; #if NBPFILTER > 0 if (ic->ic_rawbpf != NULL) bpf_mtap(ic->ic_rawbpf, m0, BPF_DIRECTION_OUT); #endif if (wpi_tx_data(sc, m0, ni, 0) != 0) { if (ni != NULL) ieee80211_release_node(ic, ni); ifp->if_oerrors++; break; } } sc->sc_tx_timer = 5; ifp->if_timer = 1; } } void wpi_watchdog(struct ifnet *ifp) { struct wpi_softc *sc = ifp->if_softc; ifp->if_timer = 0; if (sc->sc_tx_timer > 0) { if (--sc->sc_tx_timer == 0) { printf("%s: device timeout\n", sc->sc_dev.dv_xname); ifp->if_flags &= ~IFF_UP; wpi_stop(ifp, 1); ifp->if_oerrors++; return; } ifp->if_timer = 1; } ieee80211_watchdog(ifp); } int wpi_ioctl(struct ifnet *ifp, u_long cmd, caddr_t data) { struct wpi_softc *sc = ifp->if_softc; struct ieee80211com *ic = &sc->sc_ic; struct ifaddr *ifa; struct ifreq *ifr; int s, error = 0; s = splnet(); switch (cmd) { case SIOCSIFADDR: ifa = (struct ifaddr *)data; ifp->if_flags |= IFF_UP; #ifdef INET if (ifa->ifa_addr->sa_family == AF_INET) arp_ifinit(&ic->ic_ac, ifa); #endif /* FALLTHROUGH */ case SIOCSIFFLAGS: if (ifp->if_flags & IFF_UP) { if (!(ifp->if_flags & IFF_RUNNING)) wpi_init(ifp); } else { if (ifp->if_flags & IFF_RUNNING) wpi_stop(ifp, 1); } break; case SIOCADDMULTI: case SIOCDELMULTI: ifr = (struct ifreq *)data; error = (cmd == SIOCADDMULTI) ? ether_addmulti(ifr, &ic->ic_ac) : ether_delmulti(ifr, &ic->ic_ac); if (error == ENETRESET) error = 0; break; default: error = ieee80211_ioctl(ifp, cmd, data); } if (error == ENETRESET) { if ((ifp->if_flags & (IFF_UP | IFF_RUNNING)) == (IFF_UP | IFF_RUNNING)) wpi_init(ifp); error = 0; } splx(s); return error; } /* * Extract various information from EEPROM. */ void wpi_read_eeprom(struct wpi_softc *sc) { struct ieee80211com *ic = &sc->sc_ic; uint16_t val; int i; /* read MAC address */ val = wpi_read_prom_word(sc, WPI_EEPROM_MAC + 0); ic->ic_myaddr[0] = val & 0xff; ic->ic_myaddr[1] = val >> 8; val = wpi_read_prom_word(sc, WPI_EEPROM_MAC + 1); ic->ic_myaddr[2] = val & 0xff; ic->ic_myaddr[3] = val >> 8; val = wpi_read_prom_word(sc, WPI_EEPROM_MAC + 2); ic->ic_myaddr[4] = val & 0xff; ic->ic_myaddr[5] = val >> 8; /* read power settings for 2.4GHz channels */ for (i = 0; i < 14; i++) { sc->pwr1[i] = wpi_read_prom_word(sc, WPI_EEPROM_PWR1 + i); sc->pwr2[i] = wpi_read_prom_word(sc, WPI_EEPROM_PWR2 + i); DPRINTFN(2, ("channel %d pwr1 0x%04x pwr2 0x%04x\n", i + 1, sc->pwr1[i], sc->pwr2[i])); } } /* * Send a command to the firmware. */ int wpi_cmd(struct wpi_softc *sc, int code, const void *buf, int size, int async) { struct wpi_tx_ring *ring = &sc->cmdq; struct wpi_tx_desc *desc; struct wpi_tx_cmd *cmd; KASSERT(size <= sizeof cmd->data); desc = &ring->desc[ring->cur]; cmd = &ring->cmd[ring->cur]; cmd->code = code; cmd->flags = 0; cmd->qid = ring->qid; cmd->idx = ring->cur; bcopy(buf, cmd->data, size); desc->flags = htole32(WPI_PAD32(size) << 28 | 1 << 24); desc->segs[0].addr = htole32(ring->cmd_dma.paddr + ring->cur * sizeof (struct wpi_tx_cmd)); desc->segs[0].len = htole32(4 + size); /* kick cmd ring */ ring->cur = (ring->cur + 1) % WPI_CMD_RING_COUNT; WPI_WRITE(sc, WPI_TX_WIDX, ring->qid << 8 | ring->cur); return async ? 0 : tsleep(cmd, PCATCH, "wpicmd", hz); } /* * Configure h/w multi-rate retries. */ int wpi_mrr_setup(struct wpi_softc *sc) { struct ieee80211com *ic = &sc->sc_ic; struct wpi_mrr_setup mrr; int i, error; /* CCK rates (not used with 802.11a) */ for (i = WPI_CCK1; i <= WPI_CCK11; i++) { mrr.rates[i].flags = 0; mrr.rates[i].plcp = wpi_ridx_to_plcp[i]; /* fallback to the immediate lower CCK rate (if any) */ mrr.rates[i].next = (i == WPI_CCK1) ? WPI_CCK1 : i - 1; /* try one time at this rate before falling back to "next" */ mrr.rates[i].ntries = 1; } /* OFDM rates (not used with 802.11b) */ for (i = WPI_OFDM6; i <= WPI_OFDM54; i++) { mrr.rates[i].flags = 0; mrr.rates[i].plcp = wpi_ridx_to_plcp[i]; /* fallback to the immediate lower rate (if any) */ /* we allow fallback from OFDM/6 to CCK/2 in 11b/g mode */ mrr.rates[i].next = (i == WPI_OFDM6) ? ((ic->ic_curmode == IEEE80211_MODE_11A) ? WPI_OFDM6 : WPI_CCK2) : i - 1; /* try one time at this rate before falling back to "next" */ mrr.rates[i].ntries = 1; } /* setup MRR for control frames */ mrr.which = htole32(WPI_MRR_CTL); error = wpi_cmd(sc, WPI_CMD_MRR_SETUP, &mrr, sizeof mrr, 1); if (error != 0) { printf("%s: could not setup MRR for control frames\n", sc->sc_dev.dv_xname); return error; } /* setup MRR for data frames */ mrr.which = htole32(WPI_MRR_DATA); error = wpi_cmd(sc, WPI_CMD_MRR_SETUP, &mrr, sizeof mrr, 1); if (error != 0) { printf("%s: could not setup MRR for data frames\n", sc->sc_dev.dv_xname); return error; } return 0; } void wpi_set_led(struct wpi_softc *sc, uint8_t which, uint8_t off, uint8_t on) { struct wpi_cmd_led led; led.which = which; led.unit = htole32(100000); /* on/off in unit of 100ms */ led.off = off; led.on = on; (void)wpi_cmd(sc, WPI_CMD_SET_LED, &led, sizeof led, 1); } void wpi_enable_tsf(struct wpi_softc *sc, struct ieee80211_node *ni) { struct wpi_cmd_tsf tsf; uint64_t val, mod; bzero(&tsf, sizeof tsf); bcopy(ni->ni_tstamp, &tsf.tstamp, sizeof (uint64_t)); tsf.bintval = htole16(ni->ni_intval); tsf.lintval = htole16(10); /* compute remaining time until next beacon */ val = (uint64_t)ni->ni_intval * 1024; /* msecs -> usecs */ mod = letoh64(tsf.tstamp) % val; tsf.binitval = htole32((uint32_t)(val - mod)); DPRINTF(("TSF bintval=%u tstamp=%llu, init=%u\n", ni->ni_intval, letoh64(tsf.tstamp), (uint32_t)(val - mod))); if (wpi_cmd(sc, WPI_CMD_TSF, &tsf, sizeof tsf, 1) != 0) printf("%s: could not enable TSF\n", sc->sc_dev.dv_xname); } /* * Build a beacon frame that the firmware will broadcast periodically in * IBSS or HostAP modes. */ int wpi_setup_beacon(struct wpi_softc *sc, struct ieee80211_node *ni) { struct ieee80211com *ic = &sc->sc_ic; struct wpi_tx_ring *ring = &sc->cmdq; struct wpi_tx_desc *desc; struct wpi_tx_data *data; struct wpi_tx_cmd *cmd; struct wpi_cmd_beacon *bcn; struct mbuf *m0; int error; desc = &ring->desc[ring->cur]; data = &ring->data[ring->cur]; m0 = ieee80211_beacon_alloc(ic, ni); if (m0 == NULL) { printf("%s: could not allocate beacon frame\n", sc->sc_dev.dv_xname); return ENOMEM; } cmd = &ring->cmd[ring->cur]; cmd->code = WPI_CMD_SET_BEACON; cmd->flags = 0; cmd->qid = ring->qid; cmd->idx = ring->cur; bcn = (struct wpi_cmd_beacon *)cmd->data; bzero(bcn, sizeof (struct wpi_cmd_beacon)); bcn->id = WPI_ID_BROADCAST; bcn->ofdm_mask = 0xff; bcn->cck_mask = 0x0f; bcn->lifetime = htole32(0xffffffff); bcn->len = htole16(m0->m_pkthdr.len); bcn->rate = (ic->ic_curmode == IEEE80211_MODE_11A) ? wpi_plcp_signal(12) : wpi_plcp_signal(2); bcn->flags = htole32(WPI_TX_AUTO_SEQ | WPI_TX_INSERT_TSTAMP); /* save and trim IEEE802.11 header */ m_copydata(m0, 0, sizeof (struct ieee80211_frame), (caddr_t)&bcn->wh); m_adj(m0, sizeof (struct ieee80211_frame)); /* assume beacon frame is contiguous */ error = bus_dmamap_load(sc->sc_dmat, data->map, mtod(m0, void *), m0->m_pkthdr.len, NULL, BUS_DMA_NOWAIT); if (error != 0) { printf("%s: could not map beacon\n", sc->sc_dev.dv_xname); m_freem(m0); return error; } data->m = m0; /* first scatter/gather segment is used by the beacon command */ desc->flags = htole32(WPI_PAD32(m0->m_pkthdr.len) << 28 | 2 << 24); desc->segs[0].addr = htole32(ring->cmd_dma.paddr + ring->cur * sizeof (struct wpi_tx_cmd)); desc->segs[0].len = htole32(4 + sizeof (struct wpi_cmd_beacon)); desc->segs[1].addr = htole32(data->map->dm_segs[0].ds_addr); desc->segs[1].len = htole32(data->map->dm_segs[0].ds_len); /* kick cmd ring */ ring->cur = (ring->cur + 1) % WPI_CMD_RING_COUNT; WPI_WRITE(sc, WPI_TX_WIDX, ring->qid << 8 | ring->cur); return 0; } int wpi_auth(struct wpi_softc *sc) { struct ieee80211com *ic = &sc->sc_ic; struct ieee80211_node *ni = ic->ic_bss; struct wpi_node_info node; int error; /* update adapter's configuration */ IEEE80211_ADDR_COPY(sc->config.bssid, ni->ni_bssid); sc->config.chan = ieee80211_chan2ieee(ic, ni->ni_chan); sc->config.flags = htole32(WPI_CONFIG_TSF); if (IEEE80211_IS_CHAN_2GHZ(ni->ni_chan)) { sc->config.flags |= htole32(WPI_CONFIG_AUTO | WPI_CONFIG_24GHZ); } switch (ic->ic_curmode) { case IEEE80211_MODE_11A: sc->config.cck_mask = 0; sc->config.ofdm_mask = 0x15; break; case IEEE80211_MODE_11B: sc->config.cck_mask = 0x03; sc->config.ofdm_mask = 0; break; default: /* assume 802.11b/g */ sc->config.cck_mask = 0x0f; sc->config.ofdm_mask = 0x15; } if (ic->ic_flags & IEEE80211_F_SHSLOT) sc->config.flags |= htole32(WPI_CONFIG_SHSLOT); if (ic->ic_flags & IEEE80211_F_SHPREAMBLE) sc->config.flags |= htole32(WPI_CONFIG_SHPREAMBLE); DPRINTF(("config chan %d flags %x cck %x ofdm %x\n", sc->config.chan, sc->config.flags, sc->config.cck_mask, sc->config.ofdm_mask)); error = wpi_cmd(sc, WPI_CMD_CONFIGURE, &sc->config, sizeof (struct wpi_config), 1); if (error != 0) { printf("%s: could not configure\n", sc->sc_dev.dv_xname); return error; } /* add default node */ bzero(&node, sizeof node); IEEE80211_ADDR_COPY(node.bssid, ni->ni_bssid); node.id = WPI_ID_BSS; node.rate = (ic->ic_curmode == IEEE80211_MODE_11A) ? wpi_plcp_signal(12) : wpi_plcp_signal(2); error = wpi_cmd(sc, WPI_CMD_ADD_NODE, &node, sizeof node, 1); if (error != 0) { printf("%s: could not add BSS node\n", sc->sc_dev.dv_xname); return error; } error = wpi_mrr_setup(sc); if (error != 0) { printf("%s: could not setup MRR\n", sc->sc_dev.dv_xname); return error; } return 0; } /* * Send a scan request to the firmware. Since this command is huge, we map it * into a mbuf instead of using the pre-allocated set of commands. */ int wpi_scan(struct wpi_softc *sc, uint16_t flags) { struct ieee80211com *ic = &sc->sc_ic; struct wpi_tx_ring *ring = &sc->cmdq; struct wpi_tx_desc *desc; struct wpi_tx_data *data; struct wpi_tx_cmd *cmd; struct wpi_scan_hdr *hdr; struct wpi_scan_chan *chan; struct ieee80211_frame *wh; struct ieee80211_rateset *rs; struct ieee80211_channel *c; enum ieee80211_phymode mode; uint8_t *frm; int pktlen, error; desc = &ring->desc[ring->cur]; data = &ring->data[ring->cur]; MGETHDR(data->m, M_DONTWAIT, MT_DATA); if (data->m == NULL) { printf("%s: could not allocate mbuf for scan command\n", sc->sc_dev.dv_xname); return ENOMEM; } MCLGET(data->m, M_DONTWAIT); if (!(data->m->m_flags & M_EXT)) { m_freem(data->m); data->m = NULL; printf("%s: could not allocate mbuf for scan command\n", sc->sc_dev.dv_xname); return ENOMEM; } cmd = mtod(data->m, struct wpi_tx_cmd *); cmd->code = WPI_CMD_SCAN; cmd->flags = 0; cmd->qid = ring->qid; cmd->idx = ring->cur; hdr = (struct wpi_scan_hdr *)cmd->data; bzero(hdr, sizeof (struct wpi_scan_hdr)); hdr->first = 1; /* * Move to the next channel if no packets are received within 5 msecs * after sending the probe request (this helps to reduce the duration * of active scans). */ hdr->quiet = htole16(5); /* timeout in milliseconds */ hdr->threshold = htole16(1); /* min # of packets */ if (flags & IEEE80211_CHAN_A) { hdr->band = htole16(WPI_SCAN_5GHZ); /* send probe requests at 6Mbps */ hdr->rate = wpi_plcp_signal(12); } else { hdr->flags = htole32(WPI_CONFIG_24GHZ | WPI_CONFIG_AUTO); /* send probe requests at 1Mbps */ hdr->rate = wpi_plcp_signal(2); } hdr->id = WPI_ID_BROADCAST; hdr->mask = htole32(0xffffffff); hdr->magic1 = htole32(1 << 13); hdr->esslen = ic->ic_des_esslen; bcopy(ic->ic_des_essid, hdr->essid, ic->ic_des_esslen); /* * Build a probe request frame. Most of the following code is a * copy & paste of what is done in net80211. */ wh = (struct ieee80211_frame *)(hdr + 1); wh->i_fc[0] = IEEE80211_FC0_VERSION_0 | IEEE80211_FC0_TYPE_MGT | IEEE80211_FC0_SUBTYPE_PROBE_REQ; wh->i_fc[1] = IEEE80211_FC1_DIR_NODS; IEEE80211_ADDR_COPY(wh->i_addr1, etherbroadcastaddr); IEEE80211_ADDR_COPY(wh->i_addr2, ic->ic_myaddr); IEEE80211_ADDR_COPY(wh->i_addr3, etherbroadcastaddr); *(u_int16_t *)&wh->i_dur[0] = 0; /* filled by h/w */ *(u_int16_t *)&wh->i_seq[0] = 0; /* filled by h/w */ frm = (uint8_t *)(wh + 1); /* add essid IE */ frm = ieee80211_add_ssid(frm, ic->ic_des_essid, ic->ic_des_esslen); mode = ieee80211_chan2mode(ic, ic->ic_ibss_chan); rs = &ic->ic_sup_rates[mode]; /* add supported rates IE */ frm = ieee80211_add_rates(frm, rs); /* add supported xrates IE */ frm = ieee80211_add_xrates(frm, rs); /* setup length of probe request */ hdr->length = htole16(frm - (uint8_t *)wh); chan = (struct wpi_scan_chan *)frm; for (c = &ic->ic_channels[1]; c <= &ic->ic_channels[IEEE80211_CHAN_MAX]; c++) { if ((c->ic_flags & flags) != flags) continue; chan->chan = ieee80211_chan2ieee(ic, c); chan->flags = (c->ic_flags & IEEE80211_CHAN_PASSIVE) ? 0 : WPI_CHAN_ACTIVE; chan->magic = htole16(0x62ab); if (IEEE80211_IS_CHAN_5GHZ(c)) { chan->active = htole16(10); chan->passive = htole16(110); } else { chan->active = htole16(20); chan->passive = htole16(120); } hdr->nchan++; chan++; frm += sizeof (struct wpi_scan_chan); } hdr->len = hdr->nchan * sizeof (struct wpi_scan_chan); pktlen = frm - mtod(data->m, uint8_t *); error = bus_dmamap_load(sc->sc_dmat, data->map, cmd, pktlen, NULL, BUS_DMA_NOWAIT); if (error != 0) { printf("%s: could not map scan command\n", sc->sc_dev.dv_xname); m_freem(data->m); data->m = NULL; return error; } desc->flags = htole32(WPI_PAD32(pktlen) << 28 | 1 << 24); desc->segs[0].addr = htole32(data->map->dm_segs[0].ds_addr); desc->segs[0].len = htole32(data->map->dm_segs[0].ds_len); /* kick cmd ring */ ring->cur = (ring->cur + 1) % WPI_CMD_RING_COUNT; WPI_WRITE(sc, WPI_TX_WIDX, ring->qid << 8 | ring->cur); return 0; /* will be notified async. of failure/success */ } int wpi_config(struct wpi_softc *sc) { struct ieee80211com *ic = &sc->sc_ic; struct ifnet *ifp = &ic->ic_if; struct wpi_txpower txpower; struct wpi_power power; struct wpi_bluetooth bluetooth; struct wpi_node_info node; int error; /* set Tx power for 2.4GHz channels (values read from EEPROM) */ bzero(&txpower, sizeof txpower); bcopy(sc->pwr1, txpower.pwr1, 14 * sizeof (uint16_t)); bcopy(sc->pwr2, txpower.pwr2, 14 * sizeof (uint16_t)); error = wpi_cmd(sc, WPI_CMD_TXPOWER, &txpower, sizeof txpower, 0); if (error != 0) { printf("%s: could not set txpower\n", sc->sc_dev.dv_xname); return error; } /* set power mode */ bzero(&power, sizeof power); power.flags = htole32(0x8); /* XXX */ error = wpi_cmd(sc, WPI_CMD_SET_POWER_MODE, &power, sizeof power, 0); if (error != 0) { printf("%s: could not set power mode\n", sc->sc_dev.dv_xname); return error; } /* configure bluetooth coexistence */ bzero(&bluetooth, sizeof bluetooth); bluetooth.flags = 3; bluetooth.lead = 0xaa; bluetooth.kill = 1; error = wpi_cmd(sc, WPI_CMD_BLUETOOTH, &bluetooth, sizeof bluetooth, 0); if (error != 0) { printf("%s: could not configure bluetooth coexistence\n", sc->sc_dev.dv_xname); return error; } /* configure adapter */ bzero(&sc->config, sizeof (struct wpi_config)); IEEE80211_ADDR_COPY(ic->ic_myaddr, LLADDR(ifp->if_sadl)); IEEE80211_ADDR_COPY(sc->config.myaddr, ic->ic_myaddr); /* set default channel */ sc->config.chan = ieee80211_chan2ieee(ic, ic->ic_ibss_chan); sc->config.flags = htole32(WPI_CONFIG_TSF); if (IEEE80211_IS_CHAN_2GHZ(ic->ic_ibss_chan)) { sc->config.flags |= htole32(WPI_CONFIG_AUTO | WPI_CONFIG_24GHZ); } sc->config.filter = 0; switch (ic->ic_opmode) { case IEEE80211_M_STA: sc->config.mode = WPI_MODE_STA; sc->config.filter |= htole32(WPI_FILTER_MULTICAST); break; case IEEE80211_M_IBSS: case IEEE80211_M_AHDEMO: sc->config.mode = WPI_MODE_IBSS; break; case IEEE80211_M_HOSTAP: sc->config.mode = WPI_MODE_HOSTAP; break; case IEEE80211_M_MONITOR: sc->config.mode = WPI_MODE_MONITOR; sc->config.filter |= htole32(WPI_FILTER_MULTICAST | WPI_FILTER_CTL | WPI_FILTER_PROMISC); break; } sc->config.cck_mask = 0x0f; /* not yet negotiated */ sc->config.ofdm_mask = 0xff; /* not yet negotiated */ error = wpi_cmd(sc, WPI_CMD_CONFIGURE, &sc->config, sizeof (struct wpi_config), 0); if (error != 0) { printf("%s: configure command failed\n", sc->sc_dev.dv_xname); return error; } /* add broadcast node */ bzero(&node, sizeof node); IEEE80211_ADDR_COPY(node.bssid, etherbroadcastaddr); node.id = WPI_ID_BROADCAST; node.rate = wpi_plcp_signal(2); error = wpi_cmd(sc, WPI_CMD_ADD_NODE, &node, sizeof node, 0); if (error != 0) { printf("%s: could not add broadcast node\n", sc->sc_dev.dv_xname); return error; } return 0; } void wpi_stop_master(struct wpi_softc *sc) { uint32_t tmp; int ntries; tmp = WPI_READ(sc, WPI_RESET); WPI_WRITE(sc, WPI_RESET, tmp | WPI_STOP_MASTER); tmp = WPI_READ(sc, WPI_GPIO_CTL); if ((tmp & WPI_GPIO_PWR_STATUS) == WPI_GPIO_PWR_SLEEP) return; /* already asleep */ for (ntries = 0; ntries < 100; ntries++) { if (WPI_READ(sc, WPI_RESET) & WPI_MASTER_DISABLED) break; DELAY(10); } if (ntries == 100) { printf("%s: timeout waiting for master\n", sc->sc_dev.dv_xname); } } int wpi_power_up(struct wpi_softc *sc) { uint32_t tmp; int ntries; wpi_mem_lock(sc); tmp = wpi_mem_read(sc, WPI_MEM_POWER); wpi_mem_write(sc, WPI_MEM_POWER, tmp & ~0x03000000); wpi_mem_unlock(sc); for (ntries = 0; ntries < 5000; ntries++) { if (WPI_READ(sc, WPI_GPIO_STATUS) & WPI_POWERED) break; DELAY(10); } if (ntries == 5000) { printf("%s: timeout waiting for NIC to power up\n", sc->sc_dev.dv_xname); return ETIMEDOUT; } return 0; } int wpi_reset(struct wpi_softc *sc) { uint32_t tmp; int ntries; /* clear any pending interrupts */ WPI_WRITE(sc, WPI_INTR, 0xffffffff); tmp = WPI_READ(sc, WPI_PLL_CTL); WPI_WRITE(sc, WPI_PLL_CTL, tmp | WPI_PLL_INIT); tmp = WPI_READ(sc, WPI_CHICKEN); WPI_WRITE(sc, WPI_CHICKEN, tmp | WPI_CHICKEN_RXNOLOS); tmp = WPI_READ(sc, WPI_GPIO_CTL); WPI_WRITE(sc, WPI_GPIO_CTL, tmp | WPI_GPIO_INIT); /* wait for clock stabilization */ for (ntries = 0; ntries < 1000; ntries++) { if (WPI_READ(sc, WPI_GPIO_CTL) & WPI_GPIO_CLOCK) break; DELAY(10); } if (ntries == 1000) { printf("%s: timeout waiting for clock stabilization\n", sc->sc_dev.dv_xname); return ETIMEDOUT; } /* initialize EEPROM */ tmp = WPI_READ(sc, WPI_EEPROM_STATUS); if ((tmp & WPI_EEPROM_VERSION) == 0) { printf("%s: EEPROM not found\n", sc->sc_dev.dv_xname); return EIO; } WPI_WRITE(sc, WPI_EEPROM_STATUS, tmp & ~WPI_EEPROM_LOCKED); return 0; } void wpi_hw_config(struct wpi_softc *sc) { uint16_t val; uint32_t rev, hw; /* voodoo from the Linux "driver".. */ hw = WPI_READ(sc, WPI_HWCONFIG); rev = pci_conf_read(sc->sc_pct, sc->sc_pcitag, PCI_CLASS_REG); rev = PCI_REVISION(rev); if ((rev & 0xc0) == 0x40) hw |= WPI_HW_ALM_MB; else if (!(rev & 0x80)) hw |= WPI_HW_ALM_MM; val = wpi_read_prom_word(sc, WPI_EEPROM_CAPABILITIES); if ((val & 0xff) == 0x80) hw |= WPI_HW_SKU_MRC; val = wpi_read_prom_word(sc, WPI_EEPROM_REVISION); hw &= ~WPI_HW_REV_D; if ((val & 0xf0) == 0xd0) hw |= WPI_HW_REV_D; val = wpi_read_prom_word(sc, WPI_EEPROM_TYPE); if ((val & 0xff) > 1) hw |= WPI_HW_TYPE_B; DPRINTF(("setting h/w config %x\n", hw)); WPI_WRITE(sc, WPI_HWCONFIG, hw); } int wpi_init(struct ifnet *ifp) { struct wpi_softc *sc = ifp->if_softc; struct ieee80211com *ic = &sc->sc_ic; const struct wpi_firmware_hdr *hdr; const char *boot, *text, *data; u_char *fw; size_t size; uint32_t tmp; int qid, ntries, error; (void)wpi_reset(sc); wpi_mem_lock(sc); wpi_mem_write(sc, WPI_MEM_CLOCK1, 0xa00); DELAY(20); tmp = wpi_mem_read(sc, WPI_MEM_PCIDEV); wpi_mem_write(sc, WPI_MEM_PCIDEV, tmp | 0x800); wpi_mem_unlock(sc); (void)wpi_power_up(sc); wpi_hw_config(sc); /* init Rx ring */ wpi_mem_lock(sc); WPI_WRITE(sc, WPI_RX_BASE, sc->rxq.desc_dma.paddr); WPI_WRITE(sc, WPI_RX_RIDX_PTR, sc->shared_dma.paddr + offsetof(struct wpi_shared, next)); WPI_WRITE(sc, WPI_RX_WIDX, (WPI_RX_RING_COUNT - 1) & ~7); WPI_WRITE(sc, WPI_RX_CONFIG, 0xa9601010); wpi_mem_unlock(sc); /* init Tx rings */ wpi_mem_lock(sc); wpi_mem_write(sc, WPI_MEM_MODE, 2); /* bypass mode */ wpi_mem_write(sc, WPI_MEM_RA, 1); /* enable RA0 */ wpi_mem_write(sc, WPI_MEM_TXCFG, 0x3f); /* enable all 6 Tx rings */ wpi_mem_write(sc, WPI_MEM_BYPASS1, 0x10000); wpi_mem_write(sc, WPI_MEM_BYPASS2, 0x30002); wpi_mem_write(sc, WPI_MEM_MAGIC4, 4); wpi_mem_write(sc, WPI_MEM_MAGIC5, 5); WPI_WRITE(sc, WPI_TX_BASE_PTR, sc->shared_dma.paddr); WPI_WRITE(sc, WPI_MSG_CONFIG, 0xffff05a5); for (qid = 0; qid < 6; qid++) { WPI_WRITE(sc, WPI_TX_CTL(qid), 0); WPI_WRITE(sc, WPI_TX_BASE(qid), 0); WPI_WRITE(sc, WPI_TX_CONFIG(qid), 0x80200008); } wpi_mem_unlock(sc); /* clear "radio off" and "disable command" bits (reversed logic) */ WPI_WRITE(sc, WPI_UCODE_CLR, WPI_RADIO_OFF); WPI_WRITE(sc, WPI_UCODE_CLR, WPI_DISABLE_CMD); /* clear any pending interrupts */ WPI_WRITE(sc, WPI_INTR, 0xffffffff); /* enable interrupts */ WPI_WRITE(sc, WPI_MASK, WPI_INTR_MASK); if ((error = loadfirmware("wpi-ucode", &fw, &size)) != 0) { printf("%s: could not read firmware file\n", sc->sc_dev.dv_xname); goto fail1; } if (size < sizeof (struct wpi_firmware_hdr)) { printf("%s: firmware file too short: %d bytes\n", sc->sc_dev.dv_xname, size); error = EINVAL; goto fail2; } hdr = (const struct wpi_firmware_hdr *)fw; if (size < sizeof (struct wpi_firmware_hdr) + letoh32(hdr->textsz) + letoh32(hdr->datasz) + letoh32(hdr->bootsz)) { printf("%s: firmware file too short: %d bytes\n", sc->sc_dev.dv_xname, size); error = EINVAL; goto fail2; } /* firmware image layout: |HDR|<--TEXT-->|<--DATA-->|<--BOOT-->| */ text = (const char *)(hdr + 1); data = text + letoh32(hdr->textsz); boot = data + letoh32(hdr->datasz); /* load firmware boot code into NIC */ error = wpi_load_microcode(sc, boot, letoh32(hdr->bootsz)); if (error != 0) { printf("%s: could not load microcode\n", sc->sc_dev.dv_xname); goto fail2; } /* load firmware .text segment into NIC */ error = wpi_load_firmware(sc, WPI_FW_TEXT, text, letoh32(hdr->textsz)); if (error != 0) { printf("%s: could not load firmware\n", sc->sc_dev.dv_xname); goto fail2; } /* load firmware .data segment into NIC */ error = wpi_load_firmware(sc, WPI_FW_DATA, data, letoh32(hdr->datasz)); if (error != 0) { printf("%s: could not load firmware\n", sc->sc_dev.dv_xname); goto fail2; } free(fw, M_DEVBUF); /* now press "execute" ;-) */ tmp = WPI_READ(sc, WPI_RESET); tmp &= ~(WPI_MASTER_DISABLED | WPI_STOP_MASTER | WPI_NEVO_RESET); WPI_WRITE(sc, WPI_RESET, tmp); /* ..and wait at most one second for adapter to initialize */ if ((error = tsleep(sc, PCATCH, "wpiinit", hz)) != 0) { /* this isn't what was supposed to happen.. */ printf("%s: timeout waiting for adapter to initialize\n", sc->sc_dev.dv_xname); goto fail1; } /* wait for thermal sensors to calibrate */ for (ntries = 0; ntries < 1000; ntries++) { if (WPI_READ(sc, WPI_TEMPERATURE) != 0) break; DELAY(10); } if (ntries == 1000) { printf("%s: timeout waiting for thermal sensors calibration\n", sc->sc_dev.dv_xname); error = ETIMEDOUT; goto fail1; } DPRINTF(("temperature %d\n", (int)WPI_READ(sc, WPI_TEMPERATURE))); if ((error = wpi_config(sc)) != 0) { printf("%s: could not configure device\n", sc->sc_dev.dv_xname); goto fail1; } ifp->if_flags &= ~IFF_OACTIVE; ifp->if_flags |= IFF_RUNNING; if (ic->ic_opmode != IEEE80211_M_MONITOR) ieee80211_begin_scan(ifp); else ieee80211_new_state(ic, IEEE80211_S_RUN, -1); return 0; fail2: free(fw, M_DEVBUF); fail1: wpi_stop(ifp, 1); return error; } void wpi_stop(struct ifnet *ifp, int disable) { struct wpi_softc *sc = ifp->if_softc; struct ieee80211com *ic = &sc->sc_ic; uint32_t tmp; int ac; ifp->if_timer = sc->sc_tx_timer = 0; ifp->if_flags &= ~(IFF_RUNNING | IFF_OACTIVE); ieee80211_new_state(ic, IEEE80211_S_INIT, -1); /* disable interrupts */ WPI_WRITE(sc, WPI_MASK, 0); WPI_WRITE(sc, WPI_INTR, WPI_INTR_MASK); WPI_WRITE(sc, WPI_INTR_STATUS, 0xff); WPI_WRITE(sc, WPI_INTR_STATUS, 0x00070000); wpi_mem_lock(sc); wpi_mem_write(sc, WPI_MEM_MODE, 0); wpi_mem_unlock(sc); /* reset all Tx rings */ for (ac = 0; ac < 4; ac++) wpi_reset_tx_ring(sc, &sc->txq[ac]); wpi_reset_tx_ring(sc, &sc->cmdq); wpi_reset_tx_ring(sc, &sc->svcq); /* reset Rx ring */ wpi_reset_rx_ring(sc, &sc->rxq); wpi_mem_lock(sc); wpi_mem_write(sc, WPI_MEM_CLOCK2, 0x200); wpi_mem_unlock(sc); DELAY(5); wpi_stop_master(sc); tmp = WPI_READ(sc, WPI_RESET); WPI_WRITE(sc, WPI_RESET, tmp | WPI_SW_RESET); } void wpi_iter_func(void *arg, struct ieee80211_node *ni) { struct wpi_softc *sc = arg; struct wpi_node *wn = (struct wpi_node *)ni; ieee80211_amrr_choose(&sc->amrr, ni, &wn->amn); } void wpi_amrr_timeout(void *arg) { struct wpi_softc *sc = arg; struct ieee80211com *ic = &sc->sc_ic; if (ic->ic_opmode == IEEE80211_M_STA) wpi_iter_func(sc, ic->ic_bss); else ieee80211_iterate_nodes(ic, wpi_iter_func, sc); timeout_add(&sc->amrr_ch, hz / 2); } void wpi_newassoc(struct ieee80211com *ic, struct ieee80211_node *ni, int isnew) { struct wpi_softc *sc = ic->ic_if.if_softc; int i; ieee80211_amrr_node_init(&sc->amrr, &((struct wpi_node *)ni)->amn); /* set rate to some reasonable initial value */ for (i = ni->ni_rates.rs_nrates - 1; i > 0 && (ni->ni_rates.rs_rates[i] & IEEE80211_RATE_VAL) > 72; i--); ni->ni_txrate = i; } struct cfdriver wpi_cd = { NULL, "wpi", DV_IFNET };