/* $OpenBSD: mbg.c,v 1.28 2009/04/26 02:20:58 cnst Exp $ */ /* * Copyright (c) 2006, 2007 Marc Balmer * * Permission to use, copy, modify, and distribute this software for any * purpose with or without fee is hereby granted, provided that the above * copyright notice and this permission notice appear in all copies. * * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. */ #include #include #include #include #include #include #include #include #include #include #include #include #include struct mbg_softc { struct device sc_dev; bus_space_tag_t sc_iot; bus_space_handle_t sc_ioh; /* * I/O region used by the AMCC S5920 found on the PCI509 card * used to access the data. */ bus_space_tag_t sc_iot_s5920; bus_space_handle_t sc_ioh_s5920; struct ksensor sc_timedelta; struct ksensor sc_signal; struct ksensordev sc_sensordev; struct timeout sc_timeout; /* invalidate sensor */ int sc_trust; /* trust time in seconds */ int (*sc_read)(struct mbg_softc *, int cmd, char *buf, size_t len, struct timespec *tstamp); }; struct mbg_time { u_int8_t hundreds; u_int8_t sec; u_int8_t min; u_int8_t hour; u_int8_t mday; u_int8_t wday; /* 1 (monday) - 7 (sunday) */ u_int8_t mon; u_int8_t year; /* 0 - 99 */ u_int8_t status; u_int8_t signal; int8_t utc_off; }; struct mbg_time_hr { u_int32_t sec; /* always UTC */ u_int32_t frac; /* fractions of second */ int32_t utc_off; /* informal only, in seconds */ u_int16_t status; u_int8_t signal; }; /* mbg_time.status bits */ #define MBG_FREERUN 0x01 /* clock running on xtal */ #define MBG_DST_ENA 0x02 /* DST enabled */ #define MBG_SYNC 0x04 /* clock synced at least once */ #define MBG_DST_CHG 0x08 /* DST change announcement */ #define MBG_UTC 0x10 /* special UTC firmware is installed */ #define MBG_LEAP 0x20 /* announcement of a leap second */ #define MBG_IFTM 0x40 /* current time was set from host */ #define MBG_INVALID 0x80 /* time invalid, batt. was disconn. */ /* AMCC S5920 registers */ #define AMCC_DATA 0x00 /* data register, on 2nd IO region */ #define AMCC_OMB 0x0c /* outgoing mailbox */ #define AMCC_IMB 0x1c /* incoming mailbox */ /* AMCC S5933 registers */ #define AMCC_OMB1 0x00 /* outgoing mailbox 1 */ #define AMCC_IMB4 0x1c /* incoming mailbox 4 */ #define AMCC_FIFO 0x20 /* FIFO register */ #define AMCC_INTCSR 0x38 /* interrupt control/status register */ #define AMCC_MCSR 0x3c /* master control/status register */ /* ASIC registers */ #define ASIC_CFG 0x00 #define ASIC_FEATURES 0x08 /* r/o */ #define ASIC_STATUS 0x10 #define ASIC_CTLSTATUS 0x14 #define ASIC_DATA 0x18 #define ASIC_RES1 0x1c #define ASIC_ADDON 0x20 /* commands */ #define MBG_GET_TIME 0x00 #define MBG_GET_SYNC_TIME 0x02 #define MBG_GET_TIME_HR 0x03 #define MBG_SET_TIME 0x10 #define MBG_GET_TZCODE 0x32 #define MBG_SET_TZCODE 0x33 #define MBG_GET_FW_ID_1 0x40 #define MBG_GET_FW_ID_2 0x41 #define MBG_GET_SERNUM 0x42 /* timezone codes (for MBG_{GET|SET}_TZCODE) */ #define MBG_TZCODE_CET_CEST 0x00 #define MBG_TZCODE_CET 0x01 #define MBG_TZCODE_UTC 0x02 #define MBG_TZCODE_EET_EEST 0x03 /* misc. constants */ #define MBG_FIFO_LEN 16 #define MBG_ID_LEN (2 * MBG_FIFO_LEN + 1) #define MBG_BUSY 0x01 #define MBG_SIG_BIAS 55 #define MBG_SIG_MAX 68 #define NSECPERSEC 1000000000LL /* nanoseconds per second */ #define HRDIVISOR 0x100000000LL /* for hi-res timestamp */ int mbg_probe(struct device *, void *, void *); void mbg_attach(struct device *, struct device *, void *); void mbg_task(void *); void mbg_task_hr(void *); void mbg_update_sensor(struct mbg_softc *sc, struct timespec *tstamp, int64_t timedelta, u_int8_t rsignal, u_int16_t status); int mbg_read_amcc_s5920(struct mbg_softc *, int cmd, char *buf, size_t len, struct timespec *tstamp); int mbg_read_amcc_s5933(struct mbg_softc *, int cmd, char *buf, size_t len, struct timespec *tstamp); int mbg_read_asic(struct mbg_softc *, int cmd, char *buf, size_t len, struct timespec *tstamp); void mbg_timeout(void *); struct cfattach mbg_ca = { sizeof(struct mbg_softc), mbg_probe, mbg_attach }; struct cfdriver mbg_cd = { NULL, "mbg", DV_DULL }; const struct pci_matchid mbg_devices[] = { { PCI_VENDOR_MEINBERG, PCI_PRODUCT_MEINBERG_GPS170PCI }, { PCI_VENDOR_MEINBERG, PCI_PRODUCT_MEINBERG_PCI32 }, { PCI_VENDOR_MEINBERG, PCI_PRODUCT_MEINBERG_PCI509 }, { PCI_VENDOR_MEINBERG, PCI_PRODUCT_MEINBERG_PCI511 }, { PCI_VENDOR_MEINBERG, PCI_PRODUCT_MEINBERG_PEX511 } }; int mbg_probe(struct device *parent, void *match, void *aux) { return pci_matchbyid((struct pci_attach_args *)aux, mbg_devices, nitems(mbg_devices)); } void mbg_attach(struct device *parent, struct device *self, void *aux) { struct mbg_softc *sc = (struct mbg_softc *)self; struct pci_attach_args *const pa = (struct pci_attach_args *)aux; struct mbg_time tframe; pcireg_t memtype; bus_size_t iosize, iosize2; int bar = PCI_MAPREG_START, signal, t_trust; const char *desc; #ifdef MBG_DEBUG char fw_id[MBG_ID_LEN]; #endif timeout_set(&sc->sc_timeout, mbg_timeout, sc); /* for the PEX511 use BAR2 instead of BAR0*/ if (PCI_PRODUCT(pa->pa_id) == PCI_PRODUCT_MEINBERG_PEX511) bar += 0x08; memtype = pci_mapreg_type(pa->pa_pc, pa->pa_tag, bar); if (pci_mapreg_map(pa, bar, memtype, 0, &sc->sc_iot, &sc->sc_ioh, NULL, &iosize, 0)) { printf(": PCI %s region not found\n", memtype == PCI_MAPREG_TYPE_IO ? "I/O" : "memory"); return; } if ((desc = pci_findproduct(pa->pa_id)) == NULL) desc = "Radio clock"; strlcpy(sc->sc_timedelta.desc, desc, sizeof(sc->sc_timedelta.desc)); strlcpy(sc->sc_sensordev.xname, sc->sc_dev.dv_xname, sizeof(sc->sc_sensordev.xname)); sc->sc_timedelta.type = SENSOR_TIMEDELTA; sc->sc_timedelta.status = SENSOR_S_UNKNOWN; sensor_attach(&sc->sc_sensordev, &sc->sc_timedelta); sc->sc_signal.type = SENSOR_PERCENT; sc->sc_signal.status = SENSOR_S_UNKNOWN; strlcpy(sc->sc_signal.desc, "Signal", sizeof(sc->sc_signal.desc)); sensor_attach(&sc->sc_sensordev, &sc->sc_signal); t_trust = 12 * 60 * 60; /* twelve hours */ switch (PCI_PRODUCT(pa->pa_id)) { case PCI_PRODUCT_MEINBERG_PCI32: sc->sc_read = mbg_read_amcc_s5933; sensor_task_register(sc, mbg_task, 10); break; case PCI_PRODUCT_MEINBERG_PCI509: /* * map the second I/O region needed in addition to the first * to get at the actual data. */ memtype = pci_mapreg_type(pa->pa_pc, pa->pa_tag, PCI_MAPREG_START + 0x04); if (pci_mapreg_map(pa, PCI_MAPREG_START + 0x04, memtype, 0, &sc->sc_iot_s5920, &sc->sc_ioh_s5920, NULL, &iosize2, 0)) { printf(": PCI2 %s region not found\n", memtype == PCI_MAPREG_TYPE_IO ? "I/O" : "memory"); /* unmap first mapped region as well if we fail */ bus_space_unmap(sc->sc_iot, sc->sc_ioh, iosize); return; } sc->sc_read = mbg_read_amcc_s5920; sensor_task_register(sc, mbg_task, 10); break; case PCI_PRODUCT_MEINBERG_PCI511: case PCI_PRODUCT_MEINBERG_PEX511: sc->sc_read = mbg_read_asic; sensor_task_register(sc, mbg_task, 10); break; case PCI_PRODUCT_MEINBERG_GPS170PCI: t_trust = 4 * 24 * 60 * 60; /* four days */ sc->sc_read = mbg_read_asic; sensor_task_register(sc, mbg_task_hr, 1); break; default: /* this can not normally happen, but then there is murphy */ panic(": unsupported product 0x%04x", PCI_PRODUCT(pa->pa_id)); break; } sc->sc_trust = t_trust; if (sc->sc_read(sc, MBG_GET_TIME, (char *)&tframe, sizeof(struct mbg_time), NULL)) { printf(": unknown status"); sc->sc_signal.status = SENSOR_S_CRIT; } else { sc->sc_signal.status = SENSOR_S_OK; signal = tframe.signal - MBG_SIG_BIAS; if (signal < 0) signal = 0; else if (signal > MBG_SIG_MAX) signal = MBG_SIG_MAX; sc->sc_signal.value = signal; if (tframe.status & MBG_SYNC) printf(": synchronized"); else printf(": not synchronized"); if (tframe.status & MBG_FREERUN) { sc->sc_signal.status = SENSOR_S_WARN; printf(", free running"); } if (tframe.status & MBG_IFTM) printf(", time set from host"); } #ifdef MBG_DEBUG if (sc->sc_read(sc, MBG_GET_FW_ID_1, fw_id, MBG_FIFO_LEN, NULL) || sc->sc_read(sc, MBG_GET_FW_ID_2, &fw_id[MBG_FIFO_LEN], MBG_FIFO_LEN, NULL)) printf(", firmware unknown"); else { fw_id[MBG_ID_LEN - 1] = '\0'; printf(", firmware %s", fw_id); } #endif printf("\n"); sensordev_install(&sc->sc_sensordev); timeout_add_sec(&sc->sc_timeout, sc->sc_trust); } /* * mbg_task() reads a timestamp from cards that to not provide a high * resolution timestamp. The precision is limited to 1/100 sec. */ void mbg_task(void *arg) { struct mbg_softc *sc = (struct mbg_softc *)arg; struct mbg_time tframe; struct clock_ymdhms ymdhms; struct timespec tstamp; int64_t timedelta; time_t trecv; if (sc->sc_read(sc, MBG_GET_TIME, (char *)&tframe, sizeof(tframe), &tstamp)) { sc->sc_signal.status = SENSOR_S_CRIT; return; } if (tframe.status & MBG_INVALID) { sc->sc_signal.status = SENSOR_S_CRIT; return; } ymdhms.dt_year = tframe.year + 2000; ymdhms.dt_mon = tframe.mon; ymdhms.dt_day = tframe.mday; ymdhms.dt_hour = tframe.hour; ymdhms.dt_min = tframe.min; ymdhms.dt_sec = tframe.sec; trecv = clock_ymdhms_to_secs(&ymdhms) - tframe.utc_off * 3600; timedelta = (int64_t)((tstamp.tv_sec - trecv) * 100 - tframe.hundreds) * 10000000LL + tstamp.tv_nsec; mbg_update_sensor(sc, &tstamp, timedelta, tframe.signal, (u_int16_t)tframe.status); } /* * mbg_task_hr() reads a timestamp from cards that do provide a high * resolution timestamp. */ void mbg_task_hr(void *arg) { struct mbg_softc *sc = (struct mbg_softc *)arg; struct mbg_time_hr tframe; struct timespec tstamp; int64_t tlocal, trecv; if (sc->sc_read(sc, MBG_GET_TIME_HR, (char *)&tframe, sizeof(tframe), &tstamp)) { sc->sc_signal.status = SENSOR_S_CRIT; return; } if (tframe.status & MBG_INVALID) { sc->sc_signal.status = SENSOR_S_CRIT; return; } tlocal = tstamp.tv_sec * NSECPERSEC + tstamp.tv_nsec; trecv = letoh32(tframe.sec) * NSECPERSEC + (letoh32(tframe.frac) * NSECPERSEC >> 32); mbg_update_sensor(sc, &tstamp, tlocal - trecv, tframe.signal, letoh16(tframe.status)); } /* update the sensor value, common to all cards */ void mbg_update_sensor(struct mbg_softc *sc, struct timespec *tstamp, int64_t timedelta, u_int8_t rsignal, u_int16_t status) { int signal; sc->sc_timedelta.value = timedelta; sc->sc_timedelta.tv.tv_sec = tstamp->tv_sec; sc->sc_timedelta.tv.tv_usec = tstamp->tv_nsec / 1000; signal = rsignal - MBG_SIG_BIAS; if (signal < 0) signal = 0; else if (signal > MBG_SIG_MAX) signal = MBG_SIG_MAX; sc->sc_signal.value = signal * 100000 / MBG_SIG_MAX; sc->sc_signal.status = status & MBG_FREERUN ? SENSOR_S_WARN : SENSOR_S_OK; sc->sc_signal.tv.tv_sec = sc->sc_timedelta.tv.tv_sec; sc->sc_signal.tv.tv_usec = sc->sc_timedelta.tv.tv_usec; if (!(status & MBG_FREERUN)) { sc->sc_timedelta.status = SENSOR_S_OK; timeout_add_sec(&sc->sc_timeout, sc->sc_trust); } } /* * send a command and read back results to an AMCC S5920 based card * (e.g. the PCI509 DCF77 radio clock) */ int mbg_read_amcc_s5920(struct mbg_softc *sc, int cmd, char *buf, size_t len, struct timespec *tstamp) { long timer, tmax; size_t quot, rem; u_int32_t ul; int n; u_int8_t status; quot = len / 4; rem = len % 4; /* write the command, optionally taking a timestamp */ if (tstamp) nanotime(tstamp); bus_space_write_1(sc->sc_iot, sc->sc_ioh, AMCC_OMB, cmd); /* wait for the BUSY flag to go low (approx 70 us on i386) */ timer = 0; tmax = cold ? 50 : hz / 10; do { if (cold) delay(20); else tsleep(tstamp, 0, "mbg", 1); status = bus_space_read_1(sc->sc_iot, sc->sc_ioh, AMCC_IMB4 + 3); } while ((status & MBG_BUSY) && timer++ < tmax); if (status & MBG_BUSY) return -1; /* read data from the device */ if (len) { for (n = 0; n < quot; n++) { *(u_int32_t *)buf = bus_space_read_4(sc->sc_iot_s5920, sc->sc_ioh_s5920, AMCC_DATA); buf += sizeof(u_int32_t); } if (rem) { ul = bus_space_read_4(sc->sc_iot_s5920, sc->sc_ioh_s5920, AMCC_DATA); for (n = 0; n < rem; n++) *buf++ = *((char *)&ul + n); } } else bus_space_read_4(sc->sc_iot_s5920, sc->sc_ioh_s5920, AMCC_DATA); return 0; } /* * send a command and read back results to an AMCC S5933 based card * (e.g. the PCI32 DCF77 radio clock) */ int mbg_read_amcc_s5933(struct mbg_softc *sc, int cmd, char *buf, size_t len, struct timespec *tstamp) { long timer, tmax; size_t n; u_int8_t status; /* reset inbound mailbox and clear FIFO status */ bus_space_write_1(sc->sc_iot, sc->sc_ioh, AMCC_MCSR + 3, 0x0c); /* set FIFO */ bus_space_write_1(sc->sc_iot, sc->sc_ioh, AMCC_INTCSR + 3, 0x3c); /* write the command, optionally taking a timestamp */ if (tstamp) nanotime(tstamp); bus_space_write_1(sc->sc_iot, sc->sc_ioh, AMCC_OMB1, cmd); /* wait for the BUSY flag to go low (approx 70 us on i386) */ timer = 0; tmax = cold ? 50 : hz / 10; do { if (cold) delay(20); else tsleep(tstamp, 0, "mbg", 1); status = bus_space_read_1(sc->sc_iot, sc->sc_ioh, AMCC_IMB4 + 3); } while ((status & MBG_BUSY) && timer++ < tmax); if (status & MBG_BUSY) return -1; /* read data from the device FIFO */ for (n = 0; n < len; n++) { if (bus_space_read_2(sc->sc_iot, sc->sc_ioh, AMCC_MCSR) & 0x20) { return -1; } buf[n] = bus_space_read_1(sc->sc_iot, sc->sc_ioh, AMCC_FIFO + (n % 4)); } return 0; } /* * send a command and read back results to an ASIC based card * (e.g. the PCI511 DCF77 radio clock) */ int mbg_read_asic(struct mbg_softc *sc, int cmd, char *buf, size_t len, struct timespec *tstamp) { long timer, tmax; size_t n; u_int32_t data; u_int16_t port; char *p = buf; u_int8_t status; int s; /* write the command, optionally taking a timestamp */ if (tstamp) { s = splhigh(); nanotime(tstamp); bus_space_write_4(sc->sc_iot, sc->sc_ioh, ASIC_DATA, cmd); splx(s); } else bus_space_write_4(sc->sc_iot, sc->sc_ioh, ASIC_DATA, cmd); /* wait for the BUSY flag to go low */ timer = 0; tmax = cold ? 50 : hz / 10; do { if (cold) delay(20); else tsleep(tstamp, 0, "mbg", 1); status = bus_space_read_1(sc->sc_iot, sc->sc_ioh, ASIC_STATUS); } while ((status & MBG_BUSY) && timer++ < tmax); if (status & MBG_BUSY) return -1; /* read data from the device FIFO */ port = ASIC_ADDON; for (n = 0; n < len / 4; n++) { data = bus_space_read_4(sc->sc_iot, sc->sc_ioh, port); *(u_int32_t *)p = data; p += sizeof(data); port += sizeof(data); } if (len % 4) { data = bus_space_read_4(sc->sc_iot, sc->sc_ioh, port); for (n = 0; n < len % 4; n++) { *p++ = data & 0xff; data >>= 8; } } return 0; } /* * degrade the sensor state if we are feerunning for more than * sc->sc_trust seconds. */ void mbg_timeout(void *xsc) { struct mbg_softc *sc = xsc; if (sc->sc_timedelta.status == SENSOR_S_OK) { sc->sc_timedelta.status = SENSOR_S_WARN; /* * further degrade in sc->sc_trust seconds if no new valid * time data can be read from the device. */ timeout_add_sec(&sc->sc_timeout, sc->sc_trust); } else sc->sc_timedelta.status = SENSOR_S_CRIT; }