/* $OpenBSD: pciide_natsemi_reg.h,v 1.6 2004/09/24 07:38:38 grange Exp $ */ /* * Copyright (c) 2001 Jason L. Wright (jason@thought.net) * Copyright (c) 2004 Alexander Yurchenko <grange@openbsd.org> * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. */ #ifndef _DEV_PCI_PCIIDE_NATSEMI_REG_H_ #define _DEV_PCI_PCIIDE_NATSEMI_REG_H_ /* * Register definitions for National Semiconductor PC87415. Definitions * based on "PC87415: PCI-IDE DMA Master Mode Interface Controller" * (March 1996) datasheet from their website. */ #define NATSEMI_CTRL1 0x40 /* Control register1 */ #define NATSEMI_CTRL1_SWRST 0x04 /* sw rst to ch1/ch2 on */ #define NATSEMI_CTRL1_IDEPWR 0x08 #define NATSEMI_CTRL1_CH1INTMAP 0x10 #define NATSEMI_CTRL1_CH2INTMAP 0x20 #define NATSEMI_CTRL1_INTAMASK 0x40 #define NATSEMI_CTRL1_IDWR 0x80 /* write to did/vid enable */ #define NATSEMI_CTRL2 0x41 /* Control register2 */ #define NATSEMI_CTRL2_CH1MASK 0x01 /* channel 1 intr masked */ #define NATSEMI_CTRL2_CH2MASK 0x02 /* channel 2 intr masked */ #define NATSEMI_CTRL2_BARDIS 0x04 /* PCI BAR 2/3 disable */ #define NATSEMI_CTRL2_WATCHDOG 0x08 /* enable watchdog timer */ #define NATSEMI_CTRL2_BUF1BYP 0x10 /* bypass buffer 1 */ #define NATSEMI_CTRL2_BYF2BYP 0x20 /* bypass buffer 2 */ #define NATSEMI_CTRL2_IDE1MAP 0x40 /* IDE at bar 1 */ #define NATSEMI_CTRL2_IDE2MAP 0x80 /* IDE at bar 2 */ #define NATSEMI_CHMASK(chn) (NATSEMI_CTRL2_CH1MASK << (chn)) #define NATSEMI_CTRL3 0x42 /* Control register3 */ #define NATSEMI_CTRL3_CH1PREDIS 0x01 /* channel 1 prefetch disable */ #define NATSEMI_CTRL3_CH2PREDIS 0x02 /* channel 2 prefetch disable */ #define NATSEMI_CTRL3_RSTIDLE 0x04 /* reset idle state */ #define NATSEMI_CTRL3_C1D1DMARQ 0x10 /* c1d1 dmarq handshaking */ #define NATSEMI_CTRL3_C1D2DMARQ 0x20 /* c1d2 dmarq handshaking */ #define NATSEMI_CTRL3_C2D1DMARQ 0x40 /* c2d1 dmarq handshaking */ #define NATSEMI_CTRL3_C2D2DMARQ 0x80 /* c2d2 dmarq handshaking */ #define NATSEMI_WBS 0x43 /* Write buffer status */ #define NATSEMI_WBS_WB1NMPTY 0x01 /* chan 1 write buf not empty */ #define NATSEMI_WBS_WB2NMPTY 0x02 /* chan 2 write buf not empty */ #define NATSEMI_C1D1DRT 0x44 /* Channel 1/device 1 data read timing */ #define NATSEMI_C1D1DWT 0x45 /* Channel 1/device 1 data write timing */ #define NATSEMI_C1D2DRT 0x48 /* Channel 1/device 2 data read timing */ #define NATSEMI_C1D2DWT 0x49 /* Channel 1/device 2 data write timing */ #define NATSEMI_C2D1DRT 0x4c /* Channel 2/device 1 data read timing */ #define NATSEMI_C2D1DWT 0x4d /* Channel 2/device 1 data write timing */ #define NATSEMI_C2D2DRT 0x50 /* Channel 2/device 2 data read timing */ #define NATSEMI_C2D2DWT 0x51 /* Channel 2/device 2 data write timing */ #define NATSEMI_CCBT 0x54 /* Command and control block timing */ #define NATSEMI_SECT 0x55 /* Sector size */ #define NATSEMI_SECT_C1UNUSED 0x0f /* not used */ #define NATSEMI_SECT_C1_512 0x0e /* 512 bytes */ #define NATSEMI_SECT_C1_1024 0x0c /* 1024 bytes */ #define NATSEMI_SECT_C1_2048 0x08 /* 2048 bytes */ #define NATSEMI_SECT_C1_4096 0x00 /* 4096 bytes */ #define NATSEMI_SECT_C2UNUSED 0xf0 /* not used */ #define NATSEMI_SECT_C2_512 0xe0 /* 512 bytes */ #define NATSEMI_SECT_C2_1024 0xc0 /* 1024 bytes */ #define NATSEMI_SECT_C2_2048 0x80 /* 2048 bytes */ #define NATSEMI_SECT_C2_4096 0x00 /* 4096 bytes */ #define NATSEMI_RTREG(c,d) (0x44 + (c * 8) + (d * 4) + 0) #define NATSEMI_WTREG(c,d) (0x44 + (c * 8) + (d * 4) + 1) /* 17 - N = number of clocks */ static u_int8_t natsemi_pio_pulse[] = { 7, 12, 13, 14, 14 }; static u_int8_t natsemi_dma_pulse[] = { 7, 10, 10 }; /* 16 - N = number of clocks */ static u_int8_t natsemi_pio_recover[] = { 6, 8, 11, 13, 15 }; static u_int8_t natsemi_dma_recover[] = { 6, 8, 9 }; /* * Register definitions for National Semiconductor SCx200 IDE found * on Geode SC1100 IAOC. */ #define SCx200_TIM_PIO(chan, drive) (0x40 + 16 * (chan) + 8 * (drive)) #define SCx200_TIM_DMA(chan, drive) (0x44 + 16 * (chan) + 8 * (drive)) #define SCx200_PIOFORMAT_SHIFT 31 /* PIO mode timings */ const static u_int32_t scx200_pio33[2][5] = { /* Format 0 */ { 0x00009172, 0x00012171, 0x00020080, 0x00032010, 0x00040010 }, /* Format 1 */ { 0x9172d132, 0x21717121, 0x00803020, 0x20102010, 0x00100010 }}; const static u_int32_t scx200_pio66[2][5] = { /* Fromat 0 */ { 0x0000f8e4, 0x000153f3, 0x000213f1, 0x00034231, 0x00041131 }, /* Format 1 */ { 0xf8e4f8e4, 0x53f3f353, 0x13f18141, 0x42314231, 0x11311131 }}; /* DMA mode timings */ const static u_int32_t scx200_dma33[] = { 0x00077771, 0x00012121, 0x00002020 }; const static u_int32_t scx200_dma66[] = { 0x000ffff3, 0x00035352, 0x00015151 }; /* UDMA mode timings */ const static u_int32_t scx200_udma33[] = { 0x00921250, 0x00911140, 0x00911030 }; const static u_int32_t scx200_udma66[] = { 0x009436a1, 0x00933481, 0x00923261 }; #endif /* !_DEV_PCI_PCIIDE_NATSEMI_REG_H_ */