/* $OpenBSD: puc.c,v 1.2 1999/11/14 01:27:57 downsj Exp $ */ /* $NetBSD: puc.c,v 1.3 1999/02/06 06:29:54 cgd Exp $ */ /* * Copyright (c) 1996, 1998, 1999 * Christopher G. Demetriou. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by Christopher G. Demetriou * for the NetBSD Project. * 4. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ /* * PCI "universal" communication card device driver, glues com, lpt, * and similar ports to PCI via bridge chip often much larger than * the devices being glued. * * Author: Christopher G. Demetriou, May 14, 1998 (derived from NetBSD * sys/dev/pci/pciide.c, revision 1.6). * * These devices could be (and some times are) described as * communications/{serial,parallel}, etc. devices with known * programming interfaces, but those programming interfaces (in * particular the BAR assignments for devices, etc.) in fact are not * particularly well defined. * * After I/we have seen more of these devices, it may be possible * to generalize some of these bits. In particular, devices which * describe themselves as communications/serial/16[45]50, and * communications/parallel/??? might be attached via direct * 'com' and 'lpt' attachments to pci. */ #include #include #include #include #include #include struct puc_softc { struct device sc_dev; /* static configuration data */ const struct puc_device_description *sc_desc; /* card-global dynamic data */ void *sc_ih; struct { int mapped; bus_addr_t a; bus_size_t s; bus_space_tag_t t; bus_space_handle_t h; } sc_bar_mappings[6]; /* XXX constant */ /* per-port dynamic data */ struct { struct device *dev; /* filled in by port attachments */ int (*ihand) __P((void *)); void *ihandarg; } sc_ports[PUC_MAX_PORTS]; }; int puc_match __P((struct device *, void *, void *)); void puc_attach __P((struct device *, struct device *, void *)); int puc_print __P((void *, const char *)); int puc_submatch __P((struct device *, void *, void *)); struct cfattach puc_ca = { sizeof(struct puc_softc), puc_match, puc_attach }; struct cfdriver puc_cd = { NULL, "puc", DV_DULL }; static const struct puc_device_description * puc_find_description __P((pcireg_t, pcireg_t, pcireg_t, pcireg_t)); static const char * puc_port_type_name __P((int)); int puc_match(parent, match, aux) struct device *parent; void *match, *aux; { struct pci_attach_args *pa = aux; const struct puc_device_description *desc; pcireg_t bhlc, subsys; bhlc = pci_conf_read(pa->pa_pc, pa->pa_tag, PCI_BHLC_REG); if (PCI_HDRTYPE_TYPE(bhlc) != 0) return (0); subsys = pci_conf_read(pa->pa_pc, pa->pa_tag, PCI_SUBSYS_ID_REG); desc = puc_find_description(PCI_VENDOR(pa->pa_id), PCI_PRODUCT(pa->pa_id), PCI_VENDOR(subsys), PCI_PRODUCT(subsys)); if (desc != NULL) return (10); /* * Match class/subclass, so we can tell people to compile kernel * with options that cause this driver to spew. */ if (PCI_CLASS(pa->pa_class) == PCI_CLASS_COMMUNICATIONS && PCI_SUBCLASS(pa->pa_class) == PCI_SUBCLASS_BRIDGE_PCI) return (1); return (0); } void puc_attach(parent, self, aux) struct device *parent, *self; void *aux; { struct puc_softc *sc = (struct puc_softc *)self; struct pci_attach_args *pa = aux; struct puc_attach_args paa; pci_intr_handle_t intrhandle; pcireg_t subsys; int i, barindex; subsys = pci_conf_read(pa->pa_pc, pa->pa_tag, PCI_SUBSYS_ID_REG); sc->sc_desc = puc_find_description(PCI_VENDOR(pa->pa_id), PCI_PRODUCT(pa->pa_id), PCI_VENDOR(subsys), PCI_PRODUCT(subsys)); if (sc->sc_desc == NULL) { /* * This was a class/subclass match, so tell people to compile * kernel with options that cause this driver to spew. */ #ifdef PUC_PRINT_REGS printf(":\n"); pci_conf_print(pa->pa_pc, pa->pa_tag, NULL); #else printf(": unknown PCI communications device\n"); printf("%s: compile kernel with PUC_PRINT_REGS and larger\n", sc->sc_dev.dv_xname); printf("%s: mesage buffer (via 'options MSGBUFSIZE=...'),\n", sc->sc_dev.dv_xname); printf("%s: and report the result with send-pr\n", sc->sc_dev.dv_xname); #endif return; } printf(": "); for (i = 0; PUC_PORT_VALID(sc->sc_desc, i); i++) printf("%s%s", i ? ", " : "", puc_port_type_name(sc->sc_desc->ports[i].type)); printf("\n"); /* * XXX This driver assumes that 'com' ports attached to it * XXX can not be console. That isn't unreasonable, because PCI * XXX devices are supposed to be dynamically mapped, and com * XXX console ports want fixed addresses. When/if baseboard * XXX 'com' ports are identified as PCI/communications/serial * XXX devices and are known to be mapped at the standard * XXX addresses, if they can be the system console then we have * XXX to cope with doing the mapping right. Then this will get * XXX really ugly. Of course, by then we might know the real * XXX definition of PCI/communications/serial, and attach 'com' * XXX directly on PCI. */ for (i = 0; i < 6; i++) { pcireg_t bar, type; sc->sc_bar_mappings[i].mapped = 0; bar = pci_conf_read(pa->pa_pc, pa->pa_tag, PCI_MAPREG_START + 4 * i); /* XXX const */ if (bar == 0) /* BAR not implemented(?) */ continue; type = (PCI_MAPREG_TYPE(bar) == PCI_MAPREG_TYPE_IO ? PCI_MAPREG_TYPE_IO : PCI_MAPREG_MEM_TYPE(bar)); sc->sc_bar_mappings[i].mapped = (pci_mapreg_map(pa, PCI_MAPREG_START + 4 * i, type, 0, &sc->sc_bar_mappings[i].t, &sc->sc_bar_mappings[i].h, &sc->sc_bar_mappings[i].a, &sc->sc_bar_mappings[i].s) == 0); if (sc->sc_bar_mappings[i].mapped) continue; printf("%s: couldn't map BAR at offset 0x%lx\n", sc->sc_dev.dv_xname, (long)(PCI_MAPREG_START + 4 * i)); } /* Map interrupt. */ if (pci_intr_map(pa->pa_pc, pa->pa_intrtag, pa->pa_intrpin, pa->pa_intrline, &intrhandle)) { printf("%s: couldn't map interrupt\n", sc->sc_dev.dv_xname); return; } /* * XXX the sub-devices establish the interrupts, for the * XXX following reasons: * XXX * XXX * we can't really know what IPLs they'd want * XXX * XXX * the MD dispatching code can ("should") dispatch * XXX chained interrupts better than we can. * XXX * XXX It would be nice if we could indicate to the MD interrupt * XXX handling code that the interrupt line used by the device * XXX was a PCI (level triggered) interrupt. * XXX * XXX It's not pretty, but hey, what is? */ /* Configure each port. */ for (i = 0; PUC_PORT_VALID(sc->sc_desc, i); i++) { bus_space_handle_t subregion_handle; /* make sure the base address register is mapped */ barindex = PUC_PORT_BAR_INDEX(sc->sc_desc->ports[i].bar); if (!sc->sc_bar_mappings[barindex].mapped) { printf("%s: %s port uses unmapped BAR (0x%x)\n", sc->sc_dev.dv_xname, puc_port_type_name(sc->sc_desc->ports[i].type), sc->sc_desc->ports[i].bar); continue; } /* set up to configure the child device */ paa.port = i; paa.type = sc->sc_desc->ports[i].type; paa.pc = pa->pa_pc; paa.intrhandle = intrhandle; paa.a = sc->sc_bar_mappings[barindex].a; paa.t = sc->sc_bar_mappings[barindex].t; if (bus_space_subregion(sc->sc_bar_mappings[barindex].t, sc->sc_bar_mappings[barindex].h, sc->sc_desc->ports[i].offset, sc->sc_bar_mappings[barindex].s - sc->sc_desc->ports[i].offset, &subregion_handle)) { printf("%s: couldn't get subregion for port %d\n", sc->sc_dev.dv_xname, i); continue; } paa.h = subregion_handle; #if 0 printf("%s: port %d: %s @ (index %d) 0x%x (0x%lx, 0x%lx)\n", sc->sc_dev.dv_xname, paa.port, puc_port_type_name(paa.type), barindex, (int)paa.a, (long)paa.t, (long)paa.h); #endif /* and configure it */ sc->sc_ports[i].dev = config_found_sm(self, &paa, puc_print, puc_submatch); } } int puc_print(aux, pnp) void *aux; const char *pnp; { struct puc_attach_args *paa = aux; if (pnp) printf("%s at %s", puc_port_type_name(paa->type), pnp); printf(" port %d", paa->port); return (UNCONF); } int puc_submatch(parent, vcf, aux) struct device *parent; void *vcf, *aux; { struct cfdata *cf = (struct cfdata *)vcf; struct puc_attach_args *aa = aux; if (cf->cf_loc[0] != -1 && cf->cf_loc[0] != aa->port) return 0; return ((*cf->cf_attach->ca_match)(parent, cf, aux)); } static const struct puc_device_description * puc_find_description(vend, prod, svend, sprod) pcireg_t vend, prod, svend, sprod; { int i; #define checkreg(val, index) \ (((val) & puc_devices[i].rmask[(index)]) == puc_devices[i].rval[(index)]) #define pucdevdone(idx) \ (puc_devices[idx].rval[0] == 0 && puc_devices[idx].rval[1] == 0 \ && puc_devices[idx].rval[2] == 0 && puc_devices[idx].rval[3] == 0) for (i = 0; !pucdevdone(i); i++) { if (checkreg(vend, PUC_REG_VEND) && checkreg(prod, PUC_REG_PROD) && checkreg(svend, PUC_REG_SVEND) && checkreg(sprod, PUC_REG_SPROD)) return (&puc_devices[i]); } #undef devdone #undef checkreg return (NULL); } static const char * puc_port_type_name(type) int type; { switch (type) { case PUC_PORT_TYPE_COM: return "com"; case PUC_PORT_TYPE_LPT: return "lpt"; default: panic("puc_port_type_name %d", type); } }