/* $OpenBSD: viapm.c,v 1.18 2020/01/09 14:35:19 mpi Exp $ */ /* * Copyright (c) 2005 Mark Kettenis * * Permission to use, copy, modify, and distribute this software for any * purpose with or without fee is hereby granted, provided that the above * copyright notice and this permission notice appear in all copies. * * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. */ /* $NetBSD: viaenv.c,v 1.9 2002/10/02 16:51:59 thorpej Exp $ */ /* * Copyright (c) 2000 Johan Danielsson * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * 3. Neither the name of author nor the names of any contributors may * be used to endorse or promote products derived from this * software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. */ /* * Driver for the SMBus controller and power management timer * in the VIA VT82C596[B], VT82C686A, VT8231, VT8233[A], VT8235, VT8237[A,S], * VT8251, CX700, VX800, VX855 and VX900 South Bridges. * Also for the hardware monitoring part of the VIA VT82C686A and VT8231. */ #include #include #include #include #include #include #include #include #include #include #include #include #include /* * Register definitions. */ /* PCI configuration registers */ #define VIAPM_PM_CFG1 0x40 /* general configuration */ #define VIAPM_PM_CFG2 0x80 #define VIAPM_PM_CFG_TMR32 (1 << 11) /* 32-bit PM timer */ #define VIAPM_PM_CFG_PMEN (1 << 15) /* enable PM I/O space */ #define VIAPM_PM_BASE1 0x48 /* power management I/O base address */ #define VIAPM_PM_BASE2 0x88 #define VIAPM_PM_BASE_MASK 0xff80 #define VIAPM_HWMON_BASE 0x70 /* HWMon I/O base address */ #define VIAPM_HWMON_BASE_MASK 0xff80 #define VIAPM_HWMON_CFG 0x74 /* HWMon control register */ #define VIAPM_HWMON_CFG_HWEN (1 << 0) /* enable HWMon I/O space */ #define VIAPM_SMB_BASE1 0x90 /* SMBus I/O base address */ #define VIAPM_SMB_BASE2 0x80 #define VIAPM_SMB_BASE3 0xd0 #define VIAPM_SMB_BASE_MASK 0xfff0 #define VIAPM_SMB_CFG1 0xd2 /* host configuration */ #define VIAPM_SMB_CFG2 0x84 #define VIAPM_SMB_CFG_HSTEN (1 << 0) /* enable SMBus I/O space */ #define VIAPM_SMB_CFG_INTEN (1 << 1) /* enable SCI/SMI */ #define VIAPM_SMB_CFG_SCIEN (1 << 3) /* interrupt type (SCI/SMI) */ #define VIAPM_PM_SIZE 256 /* Power management I/O space size */ #define VIAPM_HWMON_SIZE 128 /* HWMon I/O space size */ #define VIAPM_SMB_SIZE 16 /* SMBus I/O space size */ /* HWMon I/O registers */ #define VIAPM_HWMON_TSENS3 0x1f #define VIAPM_HWMON_TSENS1 0x20 #define VIAPM_HWMON_TSENS2 0x21 #define VIAPM_HWMON_VSENS1 0x22 #define VIAPM_HWMON_VSENS2 0x23 #define VIAPM_HWMON_VCORE 0x24 #define VIAPM_HWMON_VSENS3 0x25 #define VIAPM_HWMON_VSENS4 0x26 #define VIAPM_HWMON_FAN1 0x29 #define VIAPM_HWMON_FAN2 0x2a #define VIAPM_HWMON_FANCONF 0x47 /* fan configuration */ #define VIAPM_HWMON_TLOW 0x49 /* temperature low order value */ #define VIAPM_HWMON_TIRQ 0x4b /* temperature interrupt configuration */ /* ACPI I/O registers */ #define VIAPM_PM_TMR 0x08 /* PM timer */ /* SMBus I/O registers */ #define VIAPM_SMB_HS 0x00 /* host status */ #define VIAPM_SMB_HS_BUSY (1 << 0) /* running a command */ #define VIAPM_SMB_HS_INTR (1 << 1) /* command completed */ #define VIAPM_SMB_HS_DEVERR (1 << 2) /* command error */ #define VIAPM_SMB_HS_BUSERR (1 << 3) /* transaction collision */ #define VIAPM_SMB_HS_FAILED (1 << 4) /* failed bus transaction */ #define VIAPM_SMB_HS_INUSE (1 << 6) /* bus semaphore */ #define VIAPM_SMB_HS_BITS \ "\020\001BUSY\002INTR\003DEVERR\004BUSERR\005FAILED\007INUSE" #define VIAPM_SMB_HC 0x02 /* host control */ #define VIAPM_SMB_HC_INTREN (1 << 0) /* enable interrupts */ #define VIAPM_SMB_HC_KILL (1 << 1) /* kill current transaction */ #define VIAPM_SMB_HC_CMD_QUICK (0 << 2) /* QUICK command */ #define VIAPM_SMB_HC_CMD_BYTE (1 << 2) /* BYTE command */ #define VIAPM_SMB_HC_CMD_BDATA (2 << 2) /* BYTE DATA command */ #define VIAPM_SMB_HC_CMD_WDATA (3 << 2) /* WORD DATA command */ #define VIAPM_SMB_HC_CMD_PCALL (4 << 2) /* PROCESS CALL command */ #define VIAPM_SMB_HC_CMD_BLOCK (5 << 2) /* BLOCK command */ #define VIAPM_SMB_HC_START (1 << 6) /* start transaction */ #define VIAPM_SMB_HCMD 0x03 /* host command */ #define VIAPM_SMB_TXSLVA 0x04 /* transmit slave address */ #define VIAPM_SMB_TXSLVA_READ (1 << 0) /* read direction */ #define VIAPM_SMB_TXSLVA_ADDR(x) (((x) & 0x7f) << 1) /* 7-bit address */ #define VIAPM_SMB_HD0 0x05 /* host data 0 */ #define VIAPM_SMB_HD1 0x06 /* host data 1 */ #define VIAPM_SMB_HBDB 0x07 /* host block data byte */ #ifdef VIAPM_DEBUG #define DPRINTF(x...) printf(x) #else #define DPRINTF(x...) #endif #define DEVNAME(sc) ((sc)->sc_dev.dv_xname) #define VIAPM_SMBUS_DELAY 100 #define VIAPM_SMBUS_TIMEOUT 1 #define VIAPM_NUM_SENSORS 10 /* three temp, two fan, five voltage */ u_int viapm_get_timecount(struct timecounter *tc); #ifndef VIAPM_FREQUENCY #define VIAPM_FREQUENCY 3579545 #endif static struct timecounter viapm_timecounter = { viapm_get_timecount, /* get_timecount */ 0, /* no poll_pps */ 0xffffff, /* counter_mask */ VIAPM_FREQUENCY, /* frequency */ "VIAPM", /* name */ 1000 /* quality */ }; struct timeout viapm_timeout; struct viapm_softc { struct device sc_dev; bus_space_tag_t sc_iot; bus_space_handle_t sc_pm_ioh; bus_space_handle_t sc_smbus_ioh; bus_space_handle_t sc_hwmon_ioh; void * sc_ih; int sc_poll; int sc_fan_div[2]; /* fan RPM divisor */ struct ksensor sc_data[VIAPM_NUM_SENSORS]; struct ksensordev sc_sensordev; struct i2c_controller sc_i2c_tag; struct rwlock sc_i2c_lock; struct { i2c_op_t op; void * buf; size_t len; int flags; volatile int error; } sc_i2c_xfer; }; int viapm_match(struct device *, void *, void *); void viapm_attach(struct device *, struct device *, void *); int viapm_i2c_acquire_bus(void *, int); void viapm_i2c_release_bus(void *, int); int viapm_i2c_exec(void *, i2c_op_t, i2c_addr_t, const void *, size_t, void *, size_t, int); int viapm_intr(void *); int val_to_uK(unsigned int); int val_to_rpm(unsigned int, int); long val_to_uV(unsigned int, int); void viapm_refresh_sensor_data(struct viapm_softc *); void viapm_refresh(void *); struct cfattach viapm_ca = { sizeof(struct viapm_softc), viapm_match, viapm_attach }; struct cfdriver viapm_cd = { NULL, "viapm", DV_DULL }; const struct pci_matchid viapm_ids[] = { { PCI_VENDOR_VIATECH, PCI_PRODUCT_VIATECH_VT82C596 }, { PCI_VENDOR_VIATECH, PCI_PRODUCT_VIATECH_VT82C596B_PM }, { PCI_VENDOR_VIATECH, PCI_PRODUCT_VIATECH_VT82C686A_SMB }, { PCI_VENDOR_VIATECH, PCI_PRODUCT_VIATECH_VT8231_PWR }, { PCI_VENDOR_VIATECH, PCI_PRODUCT_VIATECH_VT8233_ISA }, { PCI_VENDOR_VIATECH, PCI_PRODUCT_VIATECH_VT8233A_ISA }, { PCI_VENDOR_VIATECH, PCI_PRODUCT_VIATECH_VT8235_ISA }, { PCI_VENDOR_VIATECH, PCI_PRODUCT_VIATECH_VT8237_ISA }, { PCI_VENDOR_VIATECH, PCI_PRODUCT_VIATECH_VT8237A_ISA }, { PCI_VENDOR_VIATECH, PCI_PRODUCT_VIATECH_VT8237S_ISA }, { PCI_VENDOR_VIATECH, PCI_PRODUCT_VIATECH_VT8251_ISA }, { PCI_VENDOR_VIATECH, PCI_PRODUCT_VIATECH_CX700_ISA }, { PCI_VENDOR_VIATECH, PCI_PRODUCT_VIATECH_VX800_ISA }, { PCI_VENDOR_VIATECH, PCI_PRODUCT_VIATECH_VX855_ISA }, { PCI_VENDOR_VIATECH, PCI_PRODUCT_VIATECH_VX900_ISA } }; /* * XXX there doesn't seem to exist much hard documentation on how to * convert the raw values to usable units, this code is more or less * stolen from the Linux driver, but changed to suit our conditions */ /* * lookup-table to translate raw values to uK, this is the same table * used by the Linux driver (modulo units); there is a fifth degree * polynomial that supposedly been used to generate this table, but I * haven't been able to figure out how -- it doesn't give the same values */ static const long val_to_temp[] = { 20225, 20435, 20645, 20855, 21045, 21245, 21425, 21615, 21785, 21955, 22125, 22285, 22445, 22605, 22755, 22895, 23035, 23175, 23315, 23445, 23565, 23695, 23815, 23925, 24045, 24155, 24265, 24365, 24465, 24565, 24665, 24765, 24855, 24945, 25025, 25115, 25195, 25275, 25355, 25435, 25515, 25585, 25655, 25725, 25795, 25865, 25925, 25995, 26055, 26115, 26175, 26235, 26295, 26355, 26405, 26465, 26515, 26575, 26625, 26675, 26725, 26775, 26825, 26875, 26925, 26975, 27025, 27065, 27115, 27165, 27205, 27255, 27295, 27345, 27385, 27435, 27475, 27515, 27565, 27605, 27645, 27685, 27735, 27775, 27815, 27855, 27905, 27945, 27985, 28025, 28065, 28105, 28155, 28195, 28235, 28275, 28315, 28355, 28405, 28445, 28485, 28525, 28565, 28615, 28655, 28695, 28735, 28775, 28825, 28865, 28905, 28945, 28995, 29035, 29075, 29125, 29165, 29205, 29245, 29295, 29335, 29375, 29425, 29465, 29505, 29555, 29595, 29635, 29685, 29725, 29765, 29815, 29855, 29905, 29945, 29985, 30035, 30075, 30125, 30165, 30215, 30255, 30305, 30345, 30385, 30435, 30475, 30525, 30565, 30615, 30655, 30705, 30755, 30795, 30845, 30885, 30935, 30975, 31025, 31075, 31115, 31165, 31215, 31265, 31305, 31355, 31405, 31455, 31505, 31545, 31595, 31645, 31695, 31745, 31805, 31855, 31905, 31955, 32005, 32065, 32115, 32175, 32225, 32285, 32335, 32395, 32455, 32515, 32575, 32635, 32695, 32755, 32825, 32885, 32955, 33025, 33095, 33155, 33235, 33305, 33375, 33455, 33525, 33605, 33685, 33765, 33855, 33935, 34025, 34115, 34205, 34295, 34395, 34495, 34595, 34695, 34805, 34905, 35015, 35135, 35245, 35365, 35495, 35615, 35745, 35875, 36015, 36145, 36295, 36435, 36585, 36745, 36895, 37065, 37225, 37395, 37575, 37755, 37935, 38125, 38325, 38525, 38725, 38935, 39155, 39375, 39605, 39835, 40075, 40325, 40575, 40835, 41095, 41375, 41655, 41935, }; int viapm_match(struct device *parent, void *match, void *aux) { return (pci_matchbyid(aux, viapm_ids, nitems(viapm_ids))); } void viapm_attach(struct device *parent, struct device *self, void *aux) { struct viapm_softc *sc = (struct viapm_softc *)self; struct pci_attach_args *pa = aux; struct i2cbus_attach_args iba; pcireg_t conf, iobase; pci_intr_handle_t ih; const char *intrstr = NULL; int basereg, cfgreg; int i, v; sc->sc_iot = pa->pa_iot; /* SMBus */ switch (PCI_PRODUCT(pa->pa_id)) { case PCI_PRODUCT_VIATECH_VT82C596: case PCI_PRODUCT_VIATECH_VT82C596B_PM: case PCI_PRODUCT_VIATECH_VT82C686A_SMB: case PCI_PRODUCT_VIATECH_VT8231_PWR: basereg = VIAPM_SMB_BASE1; break; default: basereg = VIAPM_SMB_BASE3; } cfgreg = (VIAPM_SMB_CFG1 & (~0x03)); /* XXX 4-byte aligned */ /* Check 2nd address for VT82C596 */ iobase = pci_conf_read(pa->pa_pc, pa->pa_tag, basereg); if ((PCI_PRODUCT(pa->pa_id) == PCI_PRODUCT_VIATECH_VT82C596) && ((iobase & 0x0001) == 0)) { iobase = pci_conf_read(pa->pa_pc, pa->pa_tag, VIAPM_SMB_BASE2); cfgreg = VIAPM_SMB_CFG2; } /* Check if SMBus I/O space is enabled */ conf = pci_conf_read(pa->pa_pc, pa->pa_tag, cfgreg); if (cfgreg != VIAPM_SMB_CFG2) conf >>= 16; DPRINTF(": conf 0x%02x", conf & 0xff); if ((conf & VIAPM_SMB_CFG_HSTEN) == 0) { printf(": SMBus disabled\n"); goto nosmb; } /* Map SMBus I/O space */ iobase &= VIAPM_SMB_BASE_MASK; if (iobase == 0 || bus_space_map(sc->sc_iot, iobase, VIAPM_SMB_SIZE, 0, &sc->sc_smbus_ioh)) { printf(": can't map SMBus i/o space\n"); goto nosmb; } sc->sc_poll = 1; if ((conf & VIAPM_SMB_CFG_SCIEN) == 0) { /* No PCI IRQ */ printf(": SMI"); } else { /* Install interrupt handler */ if (pci_intr_map(pa, &ih) == 0) { intrstr = pci_intr_string(pa->pa_pc, ih); sc->sc_ih = pci_intr_establish(pa->pa_pc, ih, IPL_BIO, viapm_intr, sc, DEVNAME(sc)); if (sc->sc_ih != NULL) { printf(": %s", intrstr); sc->sc_poll = 0; } } if (sc->sc_poll) printf(": polling"); } printf("\n"); /* Attach I2C bus */ rw_init(&sc->sc_i2c_lock, "iiclk"); sc->sc_i2c_tag.ic_cookie = sc; sc->sc_i2c_tag.ic_acquire_bus = viapm_i2c_acquire_bus; sc->sc_i2c_tag.ic_release_bus = viapm_i2c_release_bus; sc->sc_i2c_tag.ic_exec = viapm_i2c_exec; bzero(&iba, sizeof iba); iba.iba_name = "iic"; iba.iba_tag = &sc->sc_i2c_tag; config_found(self, &iba, iicbus_print); nosmb: /* Power management */ switch (PCI_PRODUCT(pa->pa_id)) { case PCI_PRODUCT_VIATECH_VT82C596: case PCI_PRODUCT_VIATECH_VT82C596B_PM: case PCI_PRODUCT_VIATECH_VT82C686A_SMB: case PCI_PRODUCT_VIATECH_VT8231_PWR: basereg = VIAPM_PM_BASE1; cfgreg = VIAPM_PM_CFG1; break; default: basereg = VIAPM_PM_BASE2; cfgreg = VIAPM_PM_CFG2; } /* Check if power management I/O space is enabled */ conf = pci_conf_read(pa->pa_pc, pa->pa_tag, cfgreg); if ((conf & VIAPM_PM_CFG_PMEN) == 0) { printf("%s: PM disabled\n", DEVNAME(sc)); goto nopm; } /* Map power management I/O space */ iobase = pci_conf_read(pa->pa_pc, pa->pa_tag, basereg); iobase &= VIAPM_PM_BASE_MASK; if (iobase == 0 || bus_space_map(sc->sc_iot, iobase, VIAPM_PM_SIZE, 0, &sc->sc_pm_ioh)) { /* XXX can't map PM i/o space if ACPI mode */ DPRINTF("%s: can't map PM i/o space\n", DEVNAME(sc)); goto nopm; } /* Check for 32-bit PM timer */ if (conf & VIAPM_PM_CFG_TMR32) viapm_timecounter.tc_counter_mask = 0xffffffff; /* Register new timecounter */ viapm_timecounter.tc_priv = sc; tc_init(&viapm_timecounter); printf("%s: %s-bit timer at %lluHz\n", DEVNAME(sc), (viapm_timecounter.tc_counter_mask == 0xffffffff ? "32" : "24"), (unsigned long long)viapm_timecounter.tc_frequency); nopm: /* HWMon */ switch (PCI_PRODUCT(pa->pa_id)) { case PCI_PRODUCT_VIATECH_VT82C686A_SMB: case PCI_PRODUCT_VIATECH_VT8231_PWR: break; default: return; } /* Check if HWMon I/O space is enabled */ conf = pci_conf_read(pa->pa_pc, pa->pa_tag, VIAPM_HWMON_CFG); if ((conf & VIAPM_HWMON_CFG_HWEN) == 0) { printf("%s: HWM disabled\n", DEVNAME(sc)); return; } /* Map HWMon I/O space */ iobase = pci_conf_read(pa->pa_pc, pa->pa_tag, VIAPM_HWMON_BASE); iobase &= VIAPM_HWMON_BASE_MASK; if (iobase == 0 || bus_space_map(sc->sc_iot, iobase, VIAPM_HWMON_SIZE, 0, &sc->sc_hwmon_ioh)) { printf("%s: can't map HWM i/o space\n", DEVNAME(sc)); return; } v = bus_space_read_1(sc->sc_iot, sc->sc_hwmon_ioh, VIAPM_HWMON_FANCONF); sc->sc_fan_div[0] = 1 << ((v >> 4) & 0x3); sc->sc_fan_div[1] = 1 << ((v >> 6) & 0x3); for (i = 0; i <= 2; i++) sc->sc_data[i].type = SENSOR_TEMP; for (i = 3; i <= 4; i++) sc->sc_data[i].type = SENSOR_FANRPM; for (i = 5; i <= 9; ++i) sc->sc_data[i].type = SENSOR_VOLTS_DC; strlcpy(sc->sc_data[5].desc, "VSENS1", sizeof(sc->sc_data[5].desc)); /* CPU core (2V) */ strlcpy(sc->sc_data[6].desc, "VSENS2", sizeof(sc->sc_data[6].desc)); /* NB core? (2.5V) */ strlcpy(sc->sc_data[7].desc, "Vcore", sizeof(sc->sc_data[7].desc)); /* Vcore (3.3V) */ strlcpy(sc->sc_data[8].desc, "VSENS3", sizeof(sc->sc_data[8].desc)); /* VSENS3 (5V) */ strlcpy(sc->sc_data[9].desc, "VSENS4", sizeof(sc->sc_data[9].desc)); /* VSENS4 (12V) */ /* Get initial set of sensor values. */ viapm_refresh_sensor_data(sc); /* Register sensors with sysctl */ strlcpy(sc->sc_sensordev.xname, DEVNAME(sc), sizeof(sc->sc_sensordev.xname)); for (i = 0; i < VIAPM_NUM_SENSORS; ++i) sensor_attach(&sc->sc_sensordev, &sc->sc_data[i]); sensordev_install(&sc->sc_sensordev); /* Refresh sensors data every 1.5 seconds */ timeout_set(&viapm_timeout, viapm_refresh, sc); timeout_add_msec(&viapm_timeout, 1500); } int viapm_i2c_acquire_bus(void *cookie, int flags) { struct viapm_softc *sc = cookie; if (cold || sc->sc_poll || (flags & I2C_F_POLL)) return (0); return (rw_enter(&sc->sc_i2c_lock, RW_WRITE | RW_INTR)); } void viapm_i2c_release_bus(void *cookie, int flags) { struct viapm_softc *sc = cookie; if (cold || sc->sc_poll || (flags & I2C_F_POLL)) return; rw_exit(&sc->sc_i2c_lock); } int viapm_i2c_exec(void *cookie, i2c_op_t op, i2c_addr_t addr, const void *cmdbuf, size_t cmdlen, void *buf, size_t len, int flags) { struct viapm_softc *sc = cookie; u_int8_t *b; u_int8_t ctl, st; int retries; /* Check if there's a transfer already running */ st = bus_space_read_1(sc->sc_iot, sc->sc_smbus_ioh, VIAPM_SMB_HS); DPRINTF("%s: exec op %d, addr 0x%x, cmdlen %d, len %d, " "flags 0x%x, status 0x%b\n", DEVNAME(sc), op, addr, cmdlen, len, flags, st, VIAPM_SMB_HS_BITS); if (st & VIAPM_SMB_HS_BUSY) return (1); if (cold || sc->sc_poll) flags |= I2C_F_POLL; if (!I2C_OP_STOP_P(op) || cmdlen > 1 || len > 2) return (1); /* Setup transfer */ sc->sc_i2c_xfer.op = op; sc->sc_i2c_xfer.buf = buf; sc->sc_i2c_xfer.len = len; sc->sc_i2c_xfer.flags = flags; sc->sc_i2c_xfer.error = 0; /* Set slave address and transfer direction */ bus_space_write_1(sc->sc_iot, sc->sc_smbus_ioh, VIAPM_SMB_TXSLVA, VIAPM_SMB_TXSLVA_ADDR(addr) | (I2C_OP_READ_P(op) ? VIAPM_SMB_TXSLVA_READ : 0)); b = (void *)cmdbuf; if (cmdlen > 0) /* Set command byte */ bus_space_write_1(sc->sc_iot, sc->sc_smbus_ioh, VIAPM_SMB_HCMD, b[0]); if (I2C_OP_WRITE_P(op)) { /* Write data */ b = buf; if (len > 0) bus_space_write_1(sc->sc_iot, sc->sc_smbus_ioh, VIAPM_SMB_HD0, b[0]); if (len > 1) bus_space_write_1(sc->sc_iot, sc->sc_smbus_ioh, VIAPM_SMB_HD1, b[1]); } /* Set SMBus command */ if (len == 0) ctl = VIAPM_SMB_HC_CMD_BYTE; else if (len == 1) ctl = VIAPM_SMB_HC_CMD_BDATA; else if (len == 2) ctl = VIAPM_SMB_HC_CMD_WDATA; else panic("%s: unexpected len %zd", __func__, len); if ((flags & I2C_F_POLL) == 0) ctl |= VIAPM_SMB_HC_INTREN; /* Start transaction */ ctl |= VIAPM_SMB_HC_START; bus_space_write_1(sc->sc_iot, sc->sc_smbus_ioh, VIAPM_SMB_HC, ctl); if (flags & I2C_F_POLL) { /* Poll for completion */ DELAY(VIAPM_SMBUS_DELAY); for (retries = 1000; retries > 0; retries--) { st = bus_space_read_1(sc->sc_iot, sc->sc_smbus_ioh, VIAPM_SMB_HS); if ((st & VIAPM_SMB_HS_BUSY) == 0) break; DELAY(VIAPM_SMBUS_DELAY); } if (st & VIAPM_SMB_HS_BUSY) goto timeout; viapm_intr(sc); } else { /* Wait for interrupt */ if (tsleep_nsec(sc, PRIBIO, "iicexec", SEC_TO_NSEC(VIAPM_SMBUS_TIMEOUT))) goto timeout; } if (sc->sc_i2c_xfer.error) return (1); return (0); timeout: /* * Transfer timeout. Kill the transaction and clear status bits. */ printf("%s: timeout, status 0x%b\n", DEVNAME(sc), st, VIAPM_SMB_HS_BITS); bus_space_write_1(sc->sc_iot, sc->sc_smbus_ioh, VIAPM_SMB_HC, VIAPM_SMB_HC_KILL); DELAY(VIAPM_SMBUS_DELAY); st = bus_space_read_1(sc->sc_iot, sc->sc_smbus_ioh, VIAPM_SMB_HS); if ((st & VIAPM_SMB_HS_FAILED) == 0) printf("%s: transaction abort failed, status 0x%b\n", DEVNAME(sc), st, VIAPM_SMB_HS_BITS); bus_space_write_1(sc->sc_iot, sc->sc_smbus_ioh, VIAPM_SMB_HS, st); return (1); } int viapm_intr(void *arg) { struct viapm_softc *sc = arg; u_int8_t st; u_int8_t *b; size_t len; /* Read status */ st = bus_space_read_1(sc->sc_iot, sc->sc_smbus_ioh, VIAPM_SMB_HS); if ((st & VIAPM_SMB_HS_BUSY) != 0 || (st & (VIAPM_SMB_HS_INTR | VIAPM_SMB_HS_DEVERR | VIAPM_SMB_HS_BUSERR | VIAPM_SMB_HS_FAILED)) == 0) /* Interrupt was not for us */ return (0); DPRINTF("%s: intr st 0x%b\n", DEVNAME(sc), st, VIAPM_SMB_HS_BITS); /* Clear status bits */ bus_space_write_1(sc->sc_iot, sc->sc_smbus_ioh, VIAPM_SMB_HS, st); /* Check for errors */ if (st & (VIAPM_SMB_HS_DEVERR | VIAPM_SMB_HS_BUSERR | VIAPM_SMB_HS_FAILED)) { sc->sc_i2c_xfer.error = 1; goto done; } if (st & VIAPM_SMB_HS_INTR) { if (I2C_OP_WRITE_P(sc->sc_i2c_xfer.op)) goto done; /* Read data */ b = sc->sc_i2c_xfer.buf; len = sc->sc_i2c_xfer.len; if (len > 0) b[0] = bus_space_read_1(sc->sc_iot, sc->sc_smbus_ioh, VIAPM_SMB_HD0); if (len > 1) b[1] = bus_space_read_1(sc->sc_iot, sc->sc_smbus_ioh, VIAPM_SMB_HD1); } done: if ((sc->sc_i2c_xfer.flags & I2C_F_POLL) == 0) wakeup(sc); return (1); } int val_to_uK(unsigned int val) { int i = val / 4; int j = val % 4; KASSERT(i >= 0 && i <= 255); if (j == 0 || i == 255) return val_to_temp[i] * 10000; /* is linear interpolation ok? */ return (val_to_temp[i] * (4 - j) + val_to_temp[i + 1] * j) * 2500 /* really: / 4 * 10000 */ ; } int val_to_rpm(unsigned int val, int div) { if (val == 0) return 0; return 1350000 / val / div; } long val_to_uV(unsigned int val, int index) { static const long mult[] = {1250000, 1250000, 1670000, 2600000, 6300000}; KASSERT(index >= 0 && index <= 4); return (25LL * val + 133) * mult[index] / 2628; } void viapm_refresh_sensor_data(struct viapm_softc *sc) { int i; u_int8_t v, v2; /* temperature */ v = bus_space_read_1(sc->sc_iot, sc->sc_hwmon_ioh, VIAPM_HWMON_TIRQ); v2 = bus_space_read_1(sc->sc_iot, sc->sc_hwmon_ioh, VIAPM_HWMON_TSENS1); DPRINTF("%s: TSENS1 = %d\n", DEVNAME(sc), (v2 << 2) | (v >> 6)); sc->sc_data[0].value = val_to_uK((v2 << 2) | (v >> 6)); v = bus_space_read_1(sc->sc_iot, sc->sc_hwmon_ioh, VIAPM_HWMON_TLOW); v2 = bus_space_read_1(sc->sc_iot, sc->sc_hwmon_ioh, VIAPM_HWMON_TSENS2); DPRINTF("%s: TSENS2 = %d\n", DEVNAME(sc), (v2 << 2) | ((v >> 4) & 0x3)); sc->sc_data[1].value = val_to_uK((v2 << 2) | ((v >> 4) & 0x3)); v2 = bus_space_read_1(sc->sc_iot, sc->sc_hwmon_ioh, VIAPM_HWMON_TSENS3); DPRINTF("%s: TSENS3 = %d\n", DEVNAME(sc), (v2 << 2) | (v >> 6)); sc->sc_data[2].value = val_to_uK((v2 << 2) | (v >> 6)); /* fan */ for (i = 3; i <= 4; i++) { v = bus_space_read_1(sc->sc_iot, sc->sc_hwmon_ioh, VIAPM_HWMON_FAN1 + i - 3); DPRINTF("%s: FAN%d = %d / %d\n", DEVNAME(sc), i - 3, v, sc->sc_fan_div[i - 3]); sc->sc_data[i].value = val_to_rpm(v, sc->sc_fan_div[i - 3]); } /* voltage */ for (i = 5; i <= 9; i++) { v = bus_space_read_1(sc->sc_iot, sc->sc_hwmon_ioh, VIAPM_HWMON_VSENS1 + i - 5); DPRINTF("%s: V%d = %d\n", DEVNAME(sc), i - 5, v); sc->sc_data[i].value = val_to_uV(v, i - 5); } } void viapm_refresh(void *arg) { struct viapm_softc *sc = (struct viapm_softc *)arg; viapm_refresh_sensor_data(sc); timeout_add_msec(&viapm_timeout, 1500); } u_int viapm_get_timecount(struct timecounter *tc) { struct viapm_softc *sc = tc->tc_priv; u_int u1, u2, u3; u2 = bus_space_read_4(sc->sc_iot, sc->sc_pm_ioh, VIAPM_PM_TMR); u3 = bus_space_read_4(sc->sc_iot, sc->sc_pm_ioh, VIAPM_PM_TMR); do { u1 = u2; u2 = u3; u3 = bus_space_read_4(sc->sc_iot, sc->sc_pm_ioh, VIAPM_PM_TMR); } while (u1 > u2 || u2 > u3); return (u2); }