/* $OpenBSD: pmsreg.h,v 1.10 2013/05/31 19:21:09 jcs Exp $ */ /* $NetBSD: psmreg.h,v 1.1 1998/03/22 15:41:28 drochner Exp $ */ #ifndef SYS_DEV_PCKBC_PMSREG_H #define SYS_DEV_PCKBC_PMSREG_H /* mouse commands */ #define PMS_SET_SCALE11 0xe6 /* set scaling 1:1 */ #define PMS_SET_SCALE21 0xe7 /* set scaling 2:1 */ #define PMS_SET_RES 0xe8 /* set resolution (0..3) */ #define PMS_SEND_DEV_STATUS 0xe9 /* status request */ #define PMS_SET_STREAM_MODE 0xea #define PMS_SEND_DEV_DATA 0xeb /* read data */ #define PMS_RESET_WRAP_MODE 0xec #define PMS_SET_WRAP_MODE 0xed #define PMS_SET_REMOTE_MODE 0xf0 #define PMS_SEND_DEV_ID 0xf2 /* read device type */ #define PMS_SET_SAMPLE 0xf3 /* set sampling rate */ #define PMS_DEV_ENABLE 0xf4 /* mouse on */ #define PMS_DEV_DISABLE 0xf5 /* mouse off */ #define PMS_SET_DEFAULTS 0xf6 #define PMS_RESEND 0xfe #define PMS_RESET 0xff /* reset */ #define PMS_RSTDONE 0xaa /* PS/2 mouse data packet */ #define PMS_PS2_BUTTONSMASK 0x07 #define PMS_PS2_BUTTON1 0x01 /* left */ #define PMS_PS2_BUTTON2 0x04 /* middle */ #define PMS_PS2_BUTTON3 0x02 /* right */ #define PMS_PS2_XNEG 0x10 #define PMS_PS2_YNEG 0x20 #define PMS_INTELLI_MAGIC1 200 #define PMS_INTELLI_MAGIC2 100 #define PMS_INTELLI_MAGIC3 80 #define PMS_INTELLI_ID 0x03 #define PMS_ALPS_MAGIC1 0 #define PMS_ALPS_MAGIC2 0 #define PMS_ALPS_MAGIC3_1 10 #define PMS_ALPS_MAGIC3_2 80 #define PMS_ALPS_MAGIC3_3 100 #define PMS_ELANTECH_MAGIC1 0x3c #define PMS_ELANTECH_MAGIC2 0x03 #define PMS_ELANTECH_MAGIC3_1 0xc8 #define PMS_ELANTECH_MAGIC3_2 0x00 /* * Checking for almost-standard PS/2 packet * Note: ALPS devices never signal overflow condition */ #define PMS_ALPS_PS2_MASK 0xc8 #define PMS_ALPS_PS2_VALID 0x08 /* Checking for interleaved packet */ #define PMS_ALPS_INTERLEAVED_MASK 0xcf #define PMS_ALPS_INTERLEAVED_VALID 0x0f /* Checking for non first byte */ #define PMS_ALPS_MASK 0x80 #define PMS_ALPS_VALID 0x00 /* Synaptics queries */ #define SYNAPTICS_QUE_IDENTIFY 0x00 #define SYNAPTICS_QUE_MODES 0x01 #define SYNAPTICS_QUE_CAPABILITIES 0x02 #define SYNAPTICS_QUE_MODEL 0x03 #define SYNAPTICS_QUE_SERIAL_NUMBER_PREFIX 0x06 #define SYNAPTICS_QUE_SERIAL_NUMBER_SUFFIX 0x07 #define SYNAPTICS_QUE_RESOLUTION 0x08 #define SYNAPTICS_QUE_EXT_MODEL 0x09 #define SYNAPTICS_QUE_EXT_CAPABILITIES 0x0c #define SYNAPTICS_QUE_EXT_DIMENSIONS 0x0d #define SYNAPTICS_CMD_SET_MODE 0x14 #define SYNAPTICS_CMD_SEND_CLIENT 0x28 #define SYNAPTICS_CMD_SET_ADV_GESTURE_MODE 0xc8 /* Identify */ #define SYNAPTICS_ID_MODEL(id) (((id) >> 4) & 0x0f) #define SYNAPTICS_ID_MINOR(id) (((id) >> 16) & 0xff) #define SYNAPTICS_ID_MAJOR(id) ((id) & 0x0f) #define SYNAPTICS_ID_MAGIC 0x47 /* Modes bits */ #define SYNAPTICS_ABSOLUTE_MODE (1 << 7) #define SYNAPTICS_HIGH_RATE (1 << 6) #define SYNAPTICS_SLEEP_MODE (1 << 3) #define SYNAPTICS_DISABLE_GESTURE (1 << 2) #define SYNAPTICS_FOUR_BYTE_CLIENT (1 << 1) #define SYNAPTICS_W_MODE (1 << 0) /* Capability bits */ #define SYNAPTICS_CAP_EXTENDED (1 << 23) #define SYNAPTICS_CAP_EXTENDED_QUERIES(c) (((c) >> 20) & 0x07) #define SYNAPTICS_CAP_MIDDLE_BUTTON (1 << 18) #define SYNAPTICS_CAP_PASSTHROUGH (1 << 7) #define SYNAPTICS_CAP_SLEEP (1 << 4) #define SYNAPTICS_CAP_FOUR_BUTTON (1 << 3) #define SYNAPTICS_CAP_BALLISTICS (1 << 2) #define SYNAPTICS_CAP_MULTIFINGER (1 << 1) #define SYNAPTICS_CAP_PALMDETECT (1 << 0) /* Model ID bits */ #define SYNAPTICS_MODEL_ROT180 (1 << 23) #define SYNAPTICS_MODEL_PORTRAIT (1 << 22) #define SYNAPTICS_MODEL_SENSOR(m) (((m) >> 16) & 0x3f) #define SYNAPTICS_MODEL_HARDWARE(m) (((m) >> 9) & 0x7f) #define SYNAPTICS_MODEL_NEWABS (1 << 7) #define SYNAPTICS_MODEL_PEN (1 << 6) #define SYNAPTICS_MODEL_SIMPLC (1 << 5) #define SYNAPTICS_MODEL_GEOMETRY(m) ((m) & 0x0f) /* Resolutions */ #define SYNAPTICS_RESOLUTION_X(r) (((r) >> 16) & 0xff) #define SYNAPTICS_RESOLUTION_Y(r) ((r) & 0xff) /* Extended Model ID bits */ #define SYNAPTICS_EXT_MODEL_LIGHTCONTROL (1 << 22) #define SYNAPTICS_EXT_MODEL_PEAKDETECT (1 << 21) #define SYNAPTICS_EXT_MODEL_VWHEEL (1 << 19) #define SYNAPTICS_EXT_MODEL_EW_MODE (1 << 18) #define SYNAPTICS_EXT_MODEL_HSCROLL (1 << 17) #define SYNAPTICS_EXT_MODEL_VSCROLL (1 << 16) #define SYNAPTICS_EXT_MODEL_BUTTONS(em) ((em >> 12) & 0x0f) #define SYNAPTICS_EXT_MODEL_SENSOR(em) ((em >> 10) & 0x03) #define SYNAPTICS_EXT_MODEL_PRODUCT(em) ((em) & 0xff) /* Extended Capability bits */ #define SYNAPTICS_EXT_CAP_CLICKPAD (1 << 20) #define SYNAPTICS_EXT_CAP_ADV_GESTURE (1 << 19) #define SYNAPTICS_EXT_CAP_MAX_DIMENSIONS (1 << 17) #define SYNAPTICS_EXT_CAP_CLICKPAD_2BTN (1 << 8) /* Extended Dimensions */ #define SYNAPTICS_DIM_X(d) ((((d) & 0xff0000) >> 11) | \ (((d) & 0xf00) >> 7)) #define SYNAPTICS_DIM_Y(d) ((((d) & 0xff) << 5) | \ (((d) & 0xf000) >> 11)) /* Typical bezel limit */ #define SYNAPTICS_XMIN_BEZEL 1472 #define SYNAPTICS_XMAX_BEZEL 5472 #define SYNAPTICS_YMIN_BEZEL 1408 #define SYNAPTICS_YMAX_BEZEL 4448 #define ALPS_XMIN_BEZEL 130 #define ALPS_XMAX_BEZEL 840 #define ALPS_YMIN_BEZEL 130 #define ALPS_YMAX_BEZEL 640 #define ALPS_XSEC_BEZEL 768 #define ALPS_YSEC_BEZEL 512 #define ALPS_Z_MAGIC 127 /* Elantech queries */ #define ELANTECH_QUE_FW_ID 0 #define ELANTECH_QUE_FW_VER 1 #define ELANTECH_QUE_CAPABILITIES 2 #define ELANTECH_QUE_SAMPLE 3 #define ELANTECH_QUE_RESOLUTION 4 /* Elantech capabilities */ #define ELANTECH_CAP_HAS_ROCKER 4 #define ELANTECH_PS2_CUSTOM_COMMAND 0xf8 #define ELANTECH_CMD_READ_REG 0x10 #define ELANTECH_CMD_WRITE_REG 0x11 #define ELANTECH_CMD_READ_WRITE_REG 0x00 #define ELANTECH_ABSOLUTE_MODE 0x04 /* Hardware version 1 has hard-coded axis range values. * X axis range is 0 to 576, Y axis range is 0 to 384. * Edge offset accounts for bezel around the touchpad. */ #define ELANTECH_V1_EDGE_OFFSET 32 #define ELANTECH_V1_X_MIN (0 + ELANTECH_V1_EDGE_OFFSET) #define ELANTECH_V1_X_MAX (576 - ELANTECH_V1_EDGE_OFFSET) #define ELANTECH_V1_Y_MIN (0 + ELANTECH_V1_EDGE_OFFSET) #define ELANTECH_V1_Y_MAX (384 - ELANTECH_V1_EDGE_OFFSET) /* Older hardware version 2 variants lack ID query capability. */ #define ELANTECH_V2_X_MAX 1152 #define ELANTECH_V2_Y_MAX 768 /* V4 */ #define ELANTECH_MAX_FINGERS 5 #define ELANTECH_V4_WEIGHT_VALUE 5 #define ELANTECH_V4_PKT_STATUS 0x10 #define ELANTECH_V4_PKT_HEAD 0x11 #define ELANTECH_V4_PKT_MOTION 0x12 #endif /* SYS_DEV_PCKBC_PMSREG_H */