/* $OpenBSD: if_wireg.h,v 1.1 1999/07/11 16:25:36 niklas Exp $ */ /* * Copyright (c) 1997, 1998, 1999 * Bill Paul . All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by Bill Paul. * 4. Neither the name of the author nor the names of any co-contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF * THE POSSIBILITY OF SUCH DAMAGE. * * From: if_wireg.h,v 1.4 1999/05/07 03:28:52 wpaul Exp $ */ struct wi_counters { u_int32_t wi_tx_unicast_frames; u_int32_t wi_tx_multicast_frames; u_int32_t wi_tx_fragments; u_int32_t wi_tx_unicast_octets; u_int32_t wi_tx_multicast_octets; u_int32_t wi_tx_deferred_xmits; u_int32_t wi_tx_single_retries; u_int32_t wi_tx_multi_retries; u_int32_t wi_tx_retry_limit; u_int32_t wi_tx_discards; u_int32_t wi_rx_unicast_frames; u_int32_t wi_rx_multicast_frames; u_int32_t wi_rx_fragments; u_int32_t wi_rx_unicast_octets; u_int32_t wi_rx_multicast_octets; u_int32_t wi_rx_fcs_errors; u_int32_t wi_rx_discards_nobuf; u_int32_t wi_tx_discards_wrong_sa; u_int32_t wi_rx_WEP_cant_decrypt; u_int32_t wi_rx_msg_in_msg_frags; u_int32_t wi_rx_msg_in_bad_msg_frags; }; struct wi_softc { #ifndef __FreeBSD__ struct device sc_dev; #endif /* !__FreeBSD__ */ struct arpcom arpcom; struct ifmedia ifmedia; bus_space_handle_t wi_bhandle; bus_space_tag_t wi_btag; int wi_tx_data_id; int wi_tx_mgmt_id; int wi_gone; int wi_if_flags; u_int16_t wi_ptype; u_int16_t wi_portnum; u_int16_t wi_max_data_len; u_int16_t wi_rts_thresh; u_int16_t wi_ap_density; u_int16_t wi_tx_rate; u_int16_t wi_create_ibss; u_int16_t wi_channel; u_int16_t wi_pm_enabled; u_int16_t wi_max_sleep; char wi_node_name[32]; char wi_net_name[32]; char wi_ibss_name[32]; u_int8_t wi_txbuf[1536]; struct wi_counters wi_stats; #ifdef __FreeBSD__ int wi_unit; struct callout_handle wi_stat_ch; #else void *sc_ih; #endif /* __FreeBSD__ */ }; #define WI_TIMEOUT 65536 #define WI_PORT0 0 #define WI_PORT1 1 #define WI_PORT2 2 #define WI_PORT3 3 #define WI_PORT4 4 #define WI_PORT5 5 /* Default port: 0 (only 0 exists on stations) */ #define WI_DEFAULT_PORT (WI_PORT0 << 8) /* Default TX rate: 2Mbps, auto fallback */ #define WI_DEFAULT_TX_RATE 3 /* Default network name: ANY */ #define WI_DEFAULT_NETNAME "ANY" #define WI_DEFAULT_AP_DENSITY 1 #define WI_DEFAULT_RTS_THRESH 2347 #define WI_DEFAULT_DATALEN 2304 #define WI_DEFAULT_CREATE_IBSS 0 #define WI_DEFAULT_PM_ENABLED 0 #define WI_DEFAULT_MAX_SLEEP 100 #ifdef __FreeBSD__ #define WI_DEFAULT_NODENAME "FreeBSD WaveLAN/IEEE node" #define WI_DEFAULT_IBSS "FreeBSD IBSS" #else /* !__FreeBSD__ */ #define WI_DEFAULT_NODENAME "WaveLAN/IEEE node" #define WI_DEFAULT_IBSS "IBSS" #endif /* __FreeBSD__ */ #define WI_DEFAULT_CHAN 3 /* * register space access macros */ #define CSR_WRITE_4(sc, reg, val) \ bus_space_write_4(sc->wi_btag, sc->wi_bhandle, reg, val) #define CSR_WRITE_2(sc, reg, val) \ bus_space_write_2(sc->wi_btag, sc->wi_bhandle, reg, val) #define CSR_WRITE_1(sc, reg, val) \ bus_space_write_1(sc->wi_btag, sc->wi_bhandle, reg, val) #define CSR_READ_4(sc, reg) \ bus_space_read_4(sc->wi_btag, sc->wi_bhandle, reg) #define CSR_READ_2(sc, reg) \ bus_space_read_2(sc->wi_btag, sc->wi_bhandle, reg) #define CSR_READ_1(sc, reg) \ bus_space_read_1(sc->wi_btag, sc->wi_bhandle, reg) /* * The WaveLAN/IEEE cards contain an 802.11 MAC controller which Lucent * calls 'Hermes.' In typical fashion, getting documentation about this * controller is about as easy as squeezing blood from a stone. Here * is more or less what I know: * * - The Hermes controller is firmware driven, and the host interacts * with the Hermes via a firmware interface, which can change. * * - The Hermes is described in a document called: "Hermes Firmware * WaveLAN/IEEE Station Functions," document #010245, which of course * Lucent will not release without an NDA. * * - Lucent has created a library called HCF (Hardware Control Functions) * though which it wants developers to interact with the card. The HCF * is needlessly complex, ill conceived and badly documented. Actually, * the comments in the HCP code itself aren't bad, but the publically * available manual that comes with it is awful, probably due largely to * the fact that it has been emasculated in order to hide information * that Lucent wants to keep proprietary. The purpose of the HCF seems * to be to insulate the driver programmer from the Hermes itself so that * Lucent has an excuse not to release programming in for it. * * - Lucent only makes available documentation and code for 'HCF Light' * which is a stripped down version of HCF with certain features not * implemented, most notably support for 802.11 frames. * * - The HCF code which I have seen blows goats. Whoever decided to * use a 132 column format should be shot. * * Rather than actually use the Lucent HCF library, I have stripped all * the useful information from it and used it to create a driver in the * usual BSD form. Note: I don't want to hear anybody whining about the * fact that the Lucent code is GPLed and mine isn't. I did not actually * put any of Lucent's code in this driver: I only used it as a reference * to obtain information about the underlying hardware. The Hermes * programming interface is not GPLed, so bite me. */ /* * Size of Hermes I/O space. */ #define WI_IOSIZ 0x40 /* * Hermes register definitions and what little I know about them. */ /* Hermes command/status registers. */ #define WI_COMMAND 0x00 #define WI_PARAM0 0x02 #define WI_PARAM1 0x04 #define WI_PARAM2 0x06 #define WI_STATUS 0x08 #define WI_RESP0 0x0A #define WI_RESP1 0x0C #define WI_RESP2 0x0E /* Command register values. */ #define WI_CMD_BUSY 0x8000 /* busy bit */ #define WI_CMD_INI 0x0000 /* initialize */ #define WI_CMD_ENABLE 0x0001 /* enable */ #define WI_CMD_DISABLE 0x0002 /* disable */ #define WI_CMD_DIAG 0x0003 #define WI_CMD_ALLOC_MEM 0x000A /* allocate NIC memory */ #define WI_CMD_TX 0x000B /* transmit */ #define WI_CMD_NOTIFY 0x0010 #define WI_CMD_INQUIRE 0x0011 #define WI_CMD_ACCESS 0x0021 #define WI_CMD_PROGRAM 0x0022 #define WI_CMD_CODE_MASK 0x003F /* * Reclaim qualifier bit, applicable to the * TX and INQUIRE commands. */ #define WI_RECLAIM 0x0100 /* reclaim NIC memory */ /* * ACCESS command qualifier bits. */ #define WI_ACCESS_READ 0x0000 #define WI_ACCESS_WRITE 0x0100 /* * PROGRAM command qualifier bits. */ #define WI_PROGRAM_DISABLE 0x0000 #define WI_PROGRAM_ENABLE_RAM 0x0100 #define WI_PROGRAM_ENABLE_NVRAM 0x0200 #define WI_PROGRAM_NVRAM 0x0300 /* Status register values */ #define WI_STAT_CMD_CODE 0x003F #define WI_STAT_DIAG_ERR 0x0100 #define WI_STAT_INQ_ERR 0x0500 #define WI_STAT_CMD_RESULT 0x7F00 /* memory handle management registers */ #define WI_INFO_FID 0x10 #define WI_RX_FID 0x20 #define WI_ALLOC_FID 0x22 #define WI_TX_CMP_FID 0x24 /* * Buffer Access Path (BAP) registers. * These are I/O channels. I believe you can use each one for * any desired purpose independently of the other. In general * though, we use BAP1 for reading and writing LTV records and * reading received data frames, and BAP0 for writing transmit * frames. This is a convention though, not a rule. */ #define WI_SEL0 0x18 #define WI_SEL1 0x1A #define WI_OFF0 0x1C #define WI_OFF1 0x1E #define WI_DATA0 0x36 #define WI_DATA1 0x38 #define WI_BAP0 WI_DATA0 #define WI_BAP1 WI_DATA1 #define WI_OFF_BUSY 0x8000 #define WI_OFF_ERR 0x4000 #define WI_OFF_DATAOFF 0x0FFF /* Event registers */ #define WI_EVENT_STAT 0x30 /* Event status */ #define WI_INT_EN 0x32 /* Interrupt enable/disable */ #define WI_EVENT_ACK 0x34 /* Ack event */ /* Events */ #define WI_EV_TICK 0x8000 /* aux timer tick */ #define WI_EV_RES 0x4000 /* controller h/w error (time out) */ #define WI_EV_INFO_DROP 0x2000 /* no RAM to build unsolicited frame */ #define WI_EV_NO_CARD 0x0800 /* card removed (hunh?) */ #define WI_EV_DUIF_RX 0x0400 /* wavelan management packet received */ #define WI_EV_INFO 0x0080 /* async info frame */ #define WI_EV_CMD 0x0010 /* command completed */ #define WI_EV_ALLOC 0x0008 /* async alloc/reclaim completed */ #define WI_EV_TX_EXC 0x0004 /* async xmit completed with failure */ #define WI_EV_TX 0x0002 /* async xmit completed succesfully */ #define WI_EV_RX 0x0001 /* async rx completed */ #define WI_INTRS \ (WI_EV_RX|WI_EV_TX|WI_EV_TX_EXC|WI_EV_ALLOC|WI_EV_INFO|WI_EV_INFO_DROP) /* Host software registers */ #define WI_SW0 0x28 #define WI_SW1 0x2A #define WI_SW2 0x2C #define WI_SW3 0x2E #define WI_CNTL 0x14 #define WI_CNTL_AUX_ENA 0xC000 #define WI_CNTL_AUX_ENA_STAT 0xC000 #define WI_CNTL_AUX_DIS_STAT 0x0000 #define WI_CNTL_AUX_ENA_CNTL 0x8000 #define WI_CNTL_AUX_DIS_CNTL 0x4000 #define WI_AUX_PAGE 0x3A #define WI_AUX_OFFSET 0x3C #define WI_AUX_DATA 0x3E /* * One form of communication with the Hermes is with what Lucent calls * LTV records, where LTV stands for Length, Type and Value. The length * and type are 16 bits and are in native byte order. The value is in * multiples of 16 bits and is in little endian byte order. */ struct wi_ltv_gen { u_int16_t wi_len; u_int16_t wi_type; u_int16_t wi_val; }; struct wi_ltv_str { u_int16_t wi_len; u_int16_t wi_type; u_int16_t wi_str[17]; }; #define WI_SETVAL(recno, val) \ do { \ struct wi_ltv_gen g; \ \ g.wi_len = 2; \ g.wi_type = recno; \ g.wi_val = val; \ wi_write_record(sc, &g); \ } while (0) #define WI_SETSTR(recno, str) \ do { \ struct wi_ltv_str s; \ int l; \ \ l = (strlen(str) + 1) & ~0x1; \ bzero((char *)&s, sizeof(s)); \ s.wi_len = (l / 2) + 2; \ s.wi_type = recno; \ s.wi_str[0] = strlen(str); \ bcopy(str, (char *)&s.wi_str[1], strlen(str)); \ wi_write_record(sc, (struct wi_ltv_gen *)&s); \ } while (0) /* * Download buffer location and length (0xFD01). */ #define WI_RID_DNLD_BUF 0xFD01 struct wi_ltv_dnld_buf { u_int16_t wi_len; u_int16_t wi_type; u_int16_t wi_buf_pg; /* page addr of intermediate dl buf*/ u_int16_t wi_buf_off; /* offset of idb */ u_int16_t wi_buf_len; /* len of idb */ }; /* * Mem sizes (0xFD02). */ #define WI_RID_MEMSZ 0xFD02 struct wi_ltv_memsz { u_int16_t wi_len; u_int16_t wi_type; u_int16_t wi_mem_ram; u_int16_t wi_mem_nvram; }; /* * List of intended regulatory domains (0xFD11). */ #define WI_RID_DOMAINS 0xFD11 struct wi_ltv_domains { u_int16_t wi_len; u_int16_t wi_type; u_int16_t wi_domains[6]; }; /* * CIS struct (0xFD13). */ #define WI_RID_CIS 0xFD13 struct wi_ltv_cis { u_int16_t wi_len; u_int16_t wi_type; u_int16_t wi_cis[240]; }; /* * Communications quality (0xFD43). */ #define WI_RID_COMMQUAL 0xFD43 struct wi_ltv_commqual { u_int16_t wi_len; u_int16_t wi_type; u_int16_t wi_coms_qual; u_int16_t wi_sig_lvl; u_int16_t wi_noise_lvl; }; /* * Actual system scale thresholds (0xFD46). */ #define WI_RID_SYSTEM_SCALE 0xFC06 #define WI_RID_SCALETHRESH 0xFD46 struct wi_ltv_scalethresh { u_int16_t wi_len; u_int16_t wi_type; u_int16_t wi_energy_detect; u_int16_t wi_carrier_detect; u_int16_t wi_defer; u_int16_t wi_cell_search; u_int16_t wi_out_of_range; u_int16_t wi_delta_snr; }; /* * PCF info struct (0xFD87). */ #define WI_RID_PCF 0xFD87 struct wi_ltv_pcf { u_int16_t wi_len; u_int16_t wi_type; u_int16_t wi_energy_detect; u_int16_t wi_carrier_detect; u_int16_t wi_defer; u_int16_t wi_cell_search; u_int16_t wi_range; }; /* * Connection control characteristics. * 1 == Basic Service Set (BSS) * 2 == Wireless Distribudion System (WDS) * 3 == Pseudo IBSS */ #define WI_RID_PORTTYPE 0xFC00 #define WI_PORTTYPE_BSS 0x1 #define WI_PORTTYPE_WDS 0x2 #define WI_PORTTYPE_ADHOC 0x3 /* * Mac addresses. */ #define WI_RID_MAC_NODE 0xFC01 #define WI_RID_MAC_WDS 0xFC08 struct wi_ltv_macaddr { u_int16_t wi_len; u_int16_t wi_type; u_int16_t wi_mac_addr[3]; }; /* * Station set identification (SSID). */ #define WI_RID_DESIRED_SSID 0xFC02 #define WI_RID_OWN_SSID 0xFC04 struct wi_ltv_ssid { u_int16_t wi_len; u_int16_t wi_type; u_int16_t wi_id[17]; }; /* * Set communications channel (radio frequency). */ #define WI_RID_OWN_CHNL 0xFC03 /* * Frame data size. */ #define WI_RID_MAX_DATALEN 0xFC07 /* * ESS power management enable */ #define WI_RID_PM_ENABLED 0xFC09 /* * ESS max PM sleep internal */ #define WI_RID_MAX_SLEEP 0xFC0C /* * Set our station name. */ #define WI_RID_NODENAME 0xFC0E struct wi_ltv_nodename { u_int16_t wi_len; u_int16_t wi_type; u_int16_t wi_nodename[17]; }; /* * Multicast addresses to be put in filter. We're * allowed up to 16 addresses in the filter. */ #define WI_RID_MCAST 0xFC80 struct wi_ltv_mcast { u_int16_t wi_len; u_int16_t wi_type; struct ether_addr wi_mcast[16]; }; /* * Create IBSS. */ #define WI_RID_CREATE_IBSS 0xFC81 #define WI_RID_FRAG_THRESH 0xFC82 #define WI_RID_RTS_THRESH 0xFC83 /* * TX rate control * 0 == Fixed 1mbps * 1 == Fixed 2mbps * 2 == auto fallback */ #define WI_RID_TX_RATE 0xFC84 /* * promiscuous mode. */ #define WI_RID_PROMISC 0xFC85 /* * Auxiliary Timer tick interval */ #define WI_RID_TICK_TIME 0xFCE0 /* * Information frame types. */ #define WI_INFO_NOTIFY 0xF000 /* Handover address */ #define WI_INFO_COUNTERS 0xF100 /* Statistics counters */ #define WI_INFO_SCAN_RESULTS 0xF101 /* Scan results */ #define WI_INFO_LINK_STAT 0xF200 /* Link status */ #define WI_INFO_ASSOC_STAT 0xF201 /* Association status */ /* * Hermes transmit/receive frame structure */ struct wi_frame { u_int16_t wi_status; /* 0x00 */ u_int32_t wi_rsvd0; /* 0x02 */ u_int16_t wi_q_info; /* 0x06 */ u_int16_t wi_rsvd1; /* 0x08 */ u_int16_t wi_tx_ctl; /* 0x0C */ u_int16_t wi_frame_ctl; /* 0x0E */ u_int16_t wi_id; /* 0x10 */ u_int8_t wi_addr1[6]; /* 0x12 */ u_int8_t wi_addr2[6]; /* 0x18 */ u_int8_t wi_addr3[6]; /* 0x1E */ u_int16_t wi_seq_ctl; /* 0x24 */ u_int8_t wi_addr4[6]; /* 0x26 */ u_int16_t wi_dat_len; /* 0x2C */ u_int8_t wi_dst_addr[6]; /* 0x2E */ u_int8_t wi_src_addr[6]; /* 0x34 */ u_int16_t wi_len; /* 0x3A */ u_int16_t wi_dat[3]; /* 0x3C */ /* SNAP header */ u_int16_t wi_type; /* 0x42 */ }; #define WI_802_3_OFFSET 0x2E #define WI_802_11_OFFSET 0x44 #define WI_802_11_OFFSET_RAW 0x3C #define WI_STAT_BADCRC 0x0001 #define WI_STAT_UNDECRYPTABLE 0x0002 #define WI_STAT_ERRSTAT 0x0003 #define WI_STAT_MAC_PORT 0x0700 #define WI_STAT_1042 0x2000 /* RFC1042 encoded */ #define WI_STAT_TUNNEL 0x4000 /* Bridge-tunnel encoded */ #define WI_STAT_WMP_MSG 0x6000 /* WaveLAN-II management protocol */ #define WI_RXSTAT_MSG_TYPE 0xE000 #define WI_ENC_TX_802_3 0x00 #define WI_ENC_TX_802_11 0x11 #define WI_ENC_TX_E_II 0x0E #define WI_ENC_TX_1042 0x00 #define WI_ENC_TX_TUNNEL 0xF8 #define WI_TXCNTL_MACPORT 0x00FF #define WI_TXCNTL_STRUCTTYPE 0xFF00 /* * SNAP (sub-network access protocol) constants for transmission * of IP datagrams over IEEE 802 networks, taken from RFC1042. * We need these for the LLC/SNAP header fields in the TX/RX frame * structure. */ #define WI_SNAP_K1 0xaa /* assigned global SAP for SNAP */ #define WI_SNAP_K2 0x00 #define WI_SNAP_CONTROL 0x03 /* unnumbered information format */ #define WI_SNAP_WORD0 (WI_SNAP_K1 | (WI_SNAP_K1 << 8)) #define WI_SNAP_WORD1 (WI_SNAP_K2 | (WI_SNAP_CONTROL << 8)) #define WI_SNAPHDR_LEN 0x6