/* $OpenBSD: rf_disks.c,v 1.9 2003/04/27 11:22:54 ho Exp $ */ /* $NetBSD: rf_disks.c,v 1.31 2000/06/02 01:17:14 oster Exp $ */ /* * Copyright (c) 1999 The NetBSD Foundation, Inc. * All rights reserved. * * This code is derived from software contributed to The NetBSD Foundation * by Greg Oster * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the NetBSD * Foundation, Inc. and its contributors. * 4. Neither the name of The NetBSD Foundation nor the names of its * contributors may be used to endorse or promote products derived * from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. */ /* * Copyright (c) 1995 Carnegie-Mellon University. * All rights reserved. * * Author: Mark Holland * * Permission to use, copy, modify and distribute this software and * its documentation is hereby granted, provided that both the copyright * notice and this permission notice appear in all copies of the * software, derivative works or modified versions, and any portions * thereof, and that both notices appear in supporting documentation. * * CARNEGIE MELLON ALLOWS FREE USE OF THIS SOFTWARE IN ITS "AS IS" * CONDITION. CARNEGIE MELLON DISCLAIMS ANY LIABILITY OF ANY KIND * FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE. * * Carnegie Mellon requests users of this software to return to * * Software Distribution Coordinator or Software.Distribution@CS.CMU.EDU * School of Computer Science * Carnegie Mellon University * Pittsburgh PA 15213-3890 * * any improvements or extensions that they make and grant Carnegie the * rights to redistribute these changes. */ /*************************************************************** * rf_disks.c -- Code to perform operations on the actual disks. ***************************************************************/ #include "rf_types.h" #include "rf_raid.h" #include "rf_alloclist.h" #include "rf_utils.h" #include "rf_configure.h" #include "rf_general.h" #include "rf_options.h" #include "rf_kintf.h" #if defined(__NetBSD__) #include "rf_netbsd.h" #elif defined(__OpenBSD__) #include "rf_openbsd.h" #endif #include #include #include #include #include #include #ifdef __NETBSD__ #include #endif /* __NETBSD__ */ int rf_AllocDiskStructures(RF_Raid_t *, RF_Config_t *); void rf_print_label_status(RF_Raid_t *, int, int, char *, RF_ComponentLabel_t *); int rf_check_label_vitals(RF_Raid_t *, int, int, char *, RF_ComponentLabel_t *, int, int); #define DPRINTF6(a,b,c,d,e,f) if (rf_diskDebug) printf(a,b,c,d,e,f) #define DPRINTF7(a,b,c,d,e,f,g) if (rf_diskDebug) printf(a,b,c,d,e,f,g) /**************************************************************************** * * Initialize the disks comprising the array. * * We want the spare disks to have regular row,col numbers so that we can * easily substitue a spare for a failed disk. But, the driver code assumes * throughout that the array contains numRow by numCol _non-spare_ disks, so * it's not clear how to fit in the spares. This is an unfortunate holdover * from raidSim. The quick and dirty fix is to make row zero bigger than the * rest, and put all the spares in it. This probably needs to get changed * eventually. * ****************************************************************************/ int rf_ConfigureDisks(RF_ShutdownList_t **listp, RF_Raid_t *raidPtr, RF_Config_t *cfgPtr) { RF_RaidDisk_t **disks; RF_SectorCount_t min_numblks = (RF_SectorCount_t) 0x7FFFFFFFFFFFLL; RF_RowCol_t r, c; int bs, ret; unsigned i, count, foundone = 0, numFailuresThisRow; int force; force = cfgPtr->force; ret = rf_AllocDiskStructures(raidPtr, cfgPtr); if (ret) goto fail; disks = raidPtr->Disks; for (r = 0; r < raidPtr->numRow; r++) { numFailuresThisRow = 0; for (c = 0; c < raidPtr->numCol; c++) { ret = rf_ConfigureDisk(raidPtr, &cfgPtr->devnames[r][c][0], &disks[r][c], r, c); if (ret) goto fail; if (disks[r][c].status == rf_ds_optimal) { raidread_component_label( raidPtr->raid_cinfo[r][c].ci_dev, raidPtr->raid_cinfo[r][c].ci_vp, &raidPtr->raid_cinfo[r][c].ci_label); } if (disks[r][c].status != rf_ds_optimal) { numFailuresThisRow++; } else { if (disks[r][c].numBlocks < min_numblks) min_numblks = disks[r][c].numBlocks; DPRINTF7("Disk at row %d col %d: dev %s" " numBlocks %ld blockSize %d (%ld MB)\n", r, c, disks[r][c].devname, (long int) disks[r][c].numBlocks, disks[r][c].blockSize, (long int) disks[r][c].numBlocks * disks[r][c].blockSize / 1024 / 1024); } } /* XXX Fix for n-fault tolerant. */ /* * XXX This should probably check to see how many failures * we can handle for this configuration ! */ if (numFailuresThisRow > 0) raidPtr->status[r] = rf_rs_degraded; } /* * All disks must be the same size & have the same block size, bs must * be a power of 2. */ bs = 0; for (foundone = r = 0; !foundone && r < raidPtr->numRow; r++) { for (c = 0; !foundone && c < raidPtr->numCol; c++) { if (disks[r][c].status == rf_ds_optimal) { bs = disks[r][c].blockSize; foundone = 1; } } } if (!foundone) { RF_ERRORMSG("RAIDFRAME: Did not find any live disks in" " the array.\n"); ret = EINVAL; goto fail; } for (count = 0, i = 1; i; i <<= 1) if (bs & i) count++; if (count != 1) { RF_ERRORMSG1("Error: block size on disks (%d) must be a" " power of 2.\n", bs); ret = EINVAL; goto fail; } if (rf_CheckLabels(raidPtr, cfgPtr)) { printf("raid%d: There were fatal errors\n", raidPtr->raidid); if (force != 0) { printf("raid%d: Fatal errors being ignored.\n", raidPtr->raidid); } else { ret = EINVAL; goto fail; } } for (r = 0; r < raidPtr->numRow; r++) { for (c = 0; c < raidPtr->numCol; c++) { if (disks[r][c].status == rf_ds_optimal) { if (disks[r][c].blockSize != bs) { RF_ERRORMSG2("Error: block size of" " disk at r %d c %d different from" " disk at r 0 c 0.\n", r, c); ret = EINVAL; goto fail; } if (disks[r][c].numBlocks != min_numblks) { RF_ERRORMSG3("WARNING: truncating disk" " at r %d c %d to %d blocks.\n", r, c, (int) min_numblks); disks[r][c].numBlocks = min_numblks; } } } } raidPtr->sectorsPerDisk = min_numblks; raidPtr->logBytesPerSector = ffs(bs) - 1; raidPtr->bytesPerSector = bs; raidPtr->sectorMask = bs - 1; return (0); fail: rf_UnconfigureVnodes(raidPtr); return (ret); } /**************************************************************************** * Set up the data structures describing the spare disks in the array. * Recall from the above comment that the spare disk descriptors are stored * in row zero, which is specially expanded to hold them. ****************************************************************************/ int rf_ConfigureSpareDisks(RF_ShutdownList_t ** listp, RF_Raid_t * raidPtr, RF_Config_t * cfgPtr) { int i, ret; unsigned int bs; RF_RaidDisk_t *disks; int num_spares_done; num_spares_done = 0; /* * The space for the spares should have already been allocated by * ConfigureDisks(). */ disks = &raidPtr->Disks[0][raidPtr->numCol]; for (i = 0; i < raidPtr->numSpare; i++) { ret = rf_ConfigureDisk(raidPtr, &cfgPtr->spare_names[i][0], &disks[i], 0, raidPtr->numCol + i); if (ret) goto fail; if (disks[i].status != rf_ds_optimal) { RF_ERRORMSG1("Warning: spare disk %s failed TUR\n", &cfgPtr->spare_names[i][0]); } else { /* Change status to spare. */ disks[i].status = rf_ds_spare; DPRINTF6("Spare Disk %d: dev %s numBlocks %ld" " blockSize %d (%ld MB).\n", i, disks[i].devname, (long int) disks[i].numBlocks, disks[i].blockSize, (long int) disks[i].numBlocks * disks[i].blockSize / 1024 / 1024); } num_spares_done++; } /* Check sizes and block sizes on spare disks. */ bs = 1 << raidPtr->logBytesPerSector; for (i = 0; i < raidPtr->numSpare; i++) { if (disks[i].blockSize != bs) { RF_ERRORMSG3("Block size of %d on spare disk %s is" " not the same as on other disks (%d).\n", disks[i].blockSize, disks[i].devname, bs); ret = EINVAL; goto fail; } if (disks[i].numBlocks < raidPtr->sectorsPerDisk) { RF_ERRORMSG3("Spare disk %s (%d blocks) is too small" " to serve as a spare (need %ld blocks).\n", disks[i].devname, disks[i].blockSize, (long int) raidPtr->sectorsPerDisk); ret = EINVAL; goto fail; } else if (disks[i].numBlocks > raidPtr->sectorsPerDisk) { RF_ERRORMSG2("Warning: truncating spare disk" " %s to %ld blocks.\n", disks[i].devname, (long int) raidPtr->sectorsPerDisk); disks[i].numBlocks = raidPtr->sectorsPerDisk; } } return (0); fail: /* * Release the hold on the main components. We've failed to allocate * a spare, and since we're failing, we need to free things... * * XXX Failing to allocate a spare is *not* that big of a deal... * We *can* survive without it, if need be, esp. if we get hot * adding working. * If we don't fail out here, then we need a way to remove this spare... * That should be easier to do here than if we are "live"... */ rf_UnconfigureVnodes(raidPtr); return (ret); } int rf_AllocDiskStructures(RF_Raid_t *raidPtr, RF_Config_t *cfgPtr) { RF_RaidDisk_t **disks; int ret; int r; RF_CallocAndAdd(disks, raidPtr->numRow, sizeof(RF_RaidDisk_t *), (RF_RaidDisk_t **), raidPtr->cleanupList); if (disks == NULL) { ret = ENOMEM; goto fail; } raidPtr->Disks = disks; /* Get space for the device-specific stuff... */ RF_CallocAndAdd(raidPtr->raid_cinfo, raidPtr->numRow, sizeof(struct raidcinfo *), (struct raidcinfo **), raidPtr->cleanupList); if (raidPtr->raid_cinfo == NULL) { ret = ENOMEM; goto fail; } for (r = 0; r < raidPtr->numRow; r++) { /* * We allocate RF_MAXSPARE on the first row so that we * have room to do hot-swapping of spares. */ RF_CallocAndAdd(disks[r], raidPtr->numCol + ((r == 0) ? RF_MAXSPARE : 0), sizeof(RF_RaidDisk_t), (RF_RaidDisk_t *), raidPtr->cleanupList); if (disks[r] == NULL) { ret = ENOMEM; goto fail; } /* Get more space for device specific stuff... */ RF_CallocAndAdd(raidPtr->raid_cinfo[r], raidPtr->numCol + ((r == 0) ? raidPtr->numSpare : 0), sizeof(struct raidcinfo), (struct raidcinfo *), raidPtr->cleanupList); if (raidPtr->raid_cinfo[r] == NULL) { ret = ENOMEM; goto fail; } } return(0); fail: rf_UnconfigureVnodes(raidPtr); return(ret); } /* Configure a single disk during auto-configuration at boot. */ int rf_AutoConfigureDisks(RF_Raid_t *raidPtr, RF_Config_t *cfgPtr, RF_AutoConfig_t *auto_config) { RF_RaidDisk_t **disks; RF_RaidDisk_t *diskPtr; RF_RowCol_t r, c; RF_SectorCount_t min_numblks = (RF_SectorCount_t) 0x7FFFFFFFFFFFLL; int bs, ret; int numFailuresThisRow; int force; RF_AutoConfig_t *ac; int parity_good; int mod_counter; int mod_counter_found; #if DEBUG printf("Starting autoconfiguration of RAID set...\n"); #endif /* DEBUG */ force = cfgPtr->force; ret = rf_AllocDiskStructures(raidPtr, cfgPtr); if (ret) goto fail; disks = raidPtr->Disks; /* Assume the parity will be fine... */ parity_good = RF_RAID_CLEAN; /* Check for mod_counters that are too low. */ mod_counter_found = 0; ac = auto_config; while(ac!=NULL) { if (mod_counter_found == 0) { mod_counter = ac->clabel->mod_counter; mod_counter_found = 1; } else { if (ac->clabel->mod_counter > mod_counter) { mod_counter = ac->clabel->mod_counter; } } ac->flag = 0; /* Clear the general purpose flag. */ ac = ac->next; } for (r = 0; r < raidPtr->numRow; r++) { numFailuresThisRow = 0; for (c = 0; c < raidPtr->numCol; c++) { diskPtr = &disks[r][c]; /* Find this row/col in the autoconfig. */ #if DEBUG printf("Looking for %d,%d in autoconfig.\n", r, c); #endif /* DEBUG */ ac = auto_config; while(ac!=NULL) { if (ac->clabel == NULL) { /* Big-time bad news. */ goto fail; } if ((ac->clabel->row == r) && (ac->clabel->column == c) && (ac->clabel->mod_counter == mod_counter)) { /* It's this one... */ /* * Flag it as 'used', so we don't * free it later. */ ac->flag = 1; #if DEBUG printf("Found: %s at %d,%d.\n", ac->devname, r, c); #endif /* DEBUG */ break; } ac = ac->next; } if (ac == NULL) { /* * We didn't find an exact match with a * correct mod_counter above... Can we * find one with an incorrect mod_counter * to use instead ? (This one, if we find * it, will be marked as failed once the * set configures) */ ac = auto_config; while(ac!=NULL) { if (ac->clabel == NULL) { /* Big-time bad news. */ goto fail; } if ((ac->clabel->row == r) && (ac->clabel->column == c)) { /* * It's this one... * Flag it as 'used', so we * don't free it later. */ ac->flag = 1; #if DEBUG printf("Found(low mod_counter)" ": %s at %d,%d.\n", ac->devname, r, c); #endif /* DEBUG */ break; } ac = ac->next; } } if (ac!=NULL) { /* Found it. Configure it... */ diskPtr->blockSize = ac->clabel->blockSize; diskPtr->numBlocks = ac->clabel->numBlocks; /* * Note: rf_protectedSectors is already * factored into numBlocks here. */ raidPtr->raid_cinfo[r][c].ci_vp = ac->vp; raidPtr->raid_cinfo[r][c].ci_dev = ac->dev; memcpy(&raidPtr->raid_cinfo[r][c].ci_label, ac->clabel, sizeof(*ac->clabel)); snprintf(diskPtr->devname, sizeof diskPtr->devname, "/dev/%s", ac->devname); /* * Note the fact that this component was * autoconfigured. You'll need this info * later. Trust me :) */ diskPtr->auto_configured = 1; diskPtr->dev = ac->dev; /* * We allow the user to specify that * only a fraction of the disks should * be used. This is just for debug: it * speeds up the parity scan. */ diskPtr->numBlocks = diskPtr->numBlocks * rf_sizePercentage / 100; /* * XXX These will get set multiple times, * but since we're autoconfiguring, they'd * better be always the same each time ! * If not, this is the least of your worries. */ bs = diskPtr->blockSize; min_numblks = diskPtr->numBlocks; /* * This gets done multiple times, but that's * fine -- the serial number will be the same * for all components, guaranteed. */ raidPtr->serial_number = ac->clabel->serial_number; /* * Check the last time the label * was modified. */ if (ac->clabel->mod_counter != mod_counter) { /* * Even though we've filled in all * of the above, we don't trust * this component since it's * modification counter is not * in sync with the rest, and we really * consider it to be failed. */ disks[r][c].status = rf_ds_failed; numFailuresThisRow++; } else { if (ac->clabel->clean != RF_RAID_CLEAN) { parity_good = RF_RAID_DIRTY; } } } else { /* * Didn't find it at all !!! * Component must really be dead. */ disks[r][c].status = rf_ds_failed; snprintf(disks[r][c].devname, sizeof disks[r][c].devname, "component%d", r * raidPtr->numCol + c); numFailuresThisRow++; } } /* XXX Fix for n-fault tolerant. */ /* * XXX This should probably check to see how many failures * we can handle for this configuration ! */ if (numFailuresThisRow > 0) raidPtr->status[r] = rf_rs_degraded; } /* Close the device for the ones that didn't get used. */ ac = auto_config; while(ac != NULL) { if (ac->flag == 0) { VOP_CLOSE(ac->vp, FREAD, NOCRED, 0); vput(ac->vp); ac->vp = NULL; #if DEBUG printf("Released %s from auto-config set.\n", ac->devname); #endif /* DEBUG */ } ac = ac->next; } raidPtr->mod_counter = mod_counter; /* Note the state of the parity, if any. */ raidPtr->parity_good = parity_good; raidPtr->sectorsPerDisk = min_numblks; raidPtr->logBytesPerSector = ffs(bs) - 1; raidPtr->bytesPerSector = bs; raidPtr->sectorMask = bs - 1; return (0); fail: rf_UnconfigureVnodes(raidPtr); return (ret); } /* Configure a single disk in the array. */ int rf_ConfigureDisk(RF_Raid_t *raidPtr, char *buf, RF_RaidDisk_t *diskPtr, RF_RowCol_t row, RF_RowCol_t col) { char *p; int retcode; struct partinfo dpart; struct vnode *vp; struct vattr va; struct proc *proc; int error; retcode = 0; p = rf_find_non_white(buf); if (p[strlen(p) - 1] == '\n') { /* Strip off the newline. */ p[strlen(p) - 1] = '\0'; } (void) strlcpy(diskPtr->devname, p, sizeof diskPtr->devname); proc = raidPtr->engine_thread; /* Let's start by claiming the component is fine and well... */ diskPtr->status = rf_ds_optimal; raidPtr->raid_cinfo[row][col].ci_vp = NULL; raidPtr->raid_cinfo[row][col].ci_dev = NULL; error = raidlookup(diskPtr->devname, curproc, &vp); if (error) { printf("raidlookup on device: %s failed !\n", diskPtr->devname); if (error == ENXIO) { /* The component isn't there... Must be dead :-( */ diskPtr->status = rf_ds_failed; } else { return (error); } } if (diskPtr->status == rf_ds_optimal) { if ((error = VOP_GETATTR(vp, &va, proc->p_ucred, proc)) != 0) { return (error); } error = VOP_IOCTL(vp, DIOCGPART, (caddr_t) & dpart, FREAD, proc->p_ucred, proc); if (error) { return (error); } diskPtr->blockSize = dpart.disklab->d_secsize; diskPtr->numBlocks = dpart.part->p_size - rf_protectedSectors; diskPtr->partitionSize = dpart.part->p_size; raidPtr->raid_cinfo[row][col].ci_vp = vp; raidPtr->raid_cinfo[row][col].ci_dev = va.va_rdev; /* This component was not automatically configured. */ diskPtr->auto_configured = 0; diskPtr->dev = va.va_rdev; /* * We allow the user to specify that only a fraction of the * disks should be used. This is just for debug: it speeds up * the parity scan. */ diskPtr->numBlocks = diskPtr->numBlocks * rf_sizePercentage / 100; } return (0); } void rf_print_label_status(RF_Raid_t *raidPtr, int row, int column, char *dev_name, RF_ComponentLabel_t *ci_label) { printf("raid%d: Component %s being configured at row: %d col: %d\n", raidPtr->raidid, dev_name, row, column); printf(" Row: %d Column: %d Num Rows: %d Num Columns: %d\n", ci_label->row, ci_label->column, ci_label->num_rows, ci_label->num_columns); printf(" Version: %d Serial Number: %d Mod Counter: %d\n", ci_label->version, ci_label->serial_number, ci_label->mod_counter); printf(" Clean: %s Status: %d\n", ci_label->clean ? "Yes" : "No", ci_label->status); } int rf_check_label_vitals(RF_Raid_t *raidPtr, int row, int column, char *dev_name, RF_ComponentLabel_t *ci_label, int serial_number, int mod_counter) { int fatal_error = 0; if (serial_number != ci_label->serial_number) { printf("%s has a different serial number: %d %d.\n", dev_name, serial_number, ci_label->serial_number); fatal_error = 1; } if (mod_counter != ci_label->mod_counter) { printf("%s has a different modfication count: %d %d.\n", dev_name, mod_counter, ci_label->mod_counter); } if (row != ci_label->row) { printf("Row out of alignment for: %s.\n", dev_name); fatal_error = 1; } if (column != ci_label->column) { printf("Column out of alignment for: %s.\n", dev_name); fatal_error = 1; } if (raidPtr->numRow != ci_label->num_rows) { printf("Number of rows do not match for: %s.\n", dev_name); fatal_error = 1; } if (raidPtr->numCol != ci_label->num_columns) { printf("Number of columns do not match for: %s.\n", dev_name); fatal_error = 1; } if (ci_label->clean == 0) { /* It's not clean, but that's not fatal. */ printf("%s is not clean !\n", dev_name); } return(fatal_error); } /* * * rf_CheckLabels() - Check all the component labels for consistency. * Return an error if there is anything major amiss. * */ int rf_CheckLabels(RF_Raid_t *raidPtr, RF_Config_t *cfgPtr) { int r, c; char *dev_name; RF_ComponentLabel_t *ci_label; int serial_number = 0; int mod_number = 0; int fatal_error = 0; int mod_values[4]; int mod_count[4]; int ser_values[4]; int ser_count[4]; int num_ser; int num_mod; int i; int found; int hosed_row; int hosed_column; int too_fatal; int parity_good; int force; hosed_row = -1; hosed_column = -1; too_fatal = 0; force = cfgPtr->force; /* * We're going to try to be a little intelligent here. If one * component's label is bogus, and we can identify that it's the * *only* one that's gone, we'll mark it as "failed" and allow * the configuration to proceed. This will be the *only* case * that we'll proceed if there would be (otherwise) fatal errors. * * Basically we simply keep a count of how many components had * what serial number. If all but one agree, we simply mark * the disagreeing component as being failed, and allow * things to come up "normally". * * We do this first for serial numbers, and then for "mod_counter". * */ num_ser = 0; num_mod = 0; for (r = 0; r < raidPtr->numRow && !fatal_error; r++) { for (c = 0; c < raidPtr->numCol; c++) { ci_label = &raidPtr->raid_cinfo[r][c].ci_label; found = 0; for(i = 0; i < num_ser; i++) { if (ser_values[i] == ci_label->serial_number) { ser_count[i]++; found = 1; break; } } if (!found) { ser_values[num_ser] = ci_label->serial_number; ser_count[num_ser] = 1; num_ser++; if (num_ser > 2) { fatal_error = 1; break; } } found = 0; for(i = 0; i < num_mod; i++) { if (mod_values[i] == ci_label->mod_counter) { mod_count[i]++; found = 1; break; } } if (!found) { mod_values[num_mod] = ci_label->mod_counter; mod_count[num_mod] = 1; num_mod++; if (num_mod > 2) { fatal_error = 1; break; } } } } #if DEBUG printf("raid%d: Summary of serial numbers:\n", raidPtr->raidid); for(i = 0; i < num_ser; i++) { printf("%d %d\n", ser_values[i], ser_count[i]); } printf("raid%d: Summary of mod counters:\n", raidPtr->raidid); for(i = 0; i < num_mod; i++) { printf("%d %d\n", mod_values[i], mod_count[i]); } #endif /* DEBUG */ serial_number = ser_values[0]; if (num_ser == 2) { if ((ser_count[0] == 1) || (ser_count[1] == 1)) { /* Locate the maverick component. */ if (ser_count[1] > ser_count[0]) { serial_number = ser_values[1]; } for (r = 0; r < raidPtr->numRow; r++) { for (c = 0; c < raidPtr->numCol; c++) { ci_label = &raidPtr->raid_cinfo[r][c].ci_label; if (serial_number != ci_label->serial_number) { hosed_row = r; hosed_column = c; break; } } } printf("Hosed component: %s.\n", &cfgPtr->devnames[hosed_row][hosed_column][0]); if (!force) { /* * We'll fail this component, as if there are * other major errors, we aren't forcing things * and we'll abort the config anyways. */ raidPtr->Disks[hosed_row][hosed_column].status = rf_ds_failed; raidPtr->numFailures++; raidPtr->status[hosed_row] = rf_rs_degraded; } } else { too_fatal = 1; } if (cfgPtr->parityConfig == '0') { /* * We've identified two different serial numbers. * RAID 0 can't cope with that, so we'll punt. */ too_fatal = 1; } } /* * Record the serial number for later. If we bail later, setting * this doesn't matter, otherwise we've got the best guess at the * correct serial number. */ raidPtr->serial_number = serial_number; mod_number = mod_values[0]; if (num_mod == 2) { if ((mod_count[0] == 1) || (mod_count[1] == 1)) { /* Locate the maverick component. */ if (mod_count[1] > mod_count[0]) { mod_number = mod_values[1]; } else if (mod_count[1] < mod_count[0]) { mod_number = mod_values[0]; } else { /* * Counts of different modification values * are the same. Assume greater value is * the correct one, all other things * considered. */ if (mod_values[0] > mod_values[1]) { mod_number = mod_values[0]; } else { mod_number = mod_values[1]; } } for (r = 0; r < raidPtr->numRow && !too_fatal; r++) { for (c = 0; c < raidPtr->numCol; c++) { ci_label = &raidPtr->raid_cinfo[r][c].ci_label; if (mod_number != ci_label->mod_counter) { if ((hosed_row == r) && (hosed_column == c)) { /* * Same one. Can * deal with it. */ } else { hosed_row = r; hosed_column = c; if (num_ser != 1) { too_fatal = 1; break; } } } } } printf("Hosed component: %s.\n", &cfgPtr->devnames[hosed_row][hosed_column][0]); if (!force) { /* * We'll fail this component, as if there are * other major errors, we aren't forcing things * and we'll abort the config anyways. */ if (raidPtr ->Disks[hosed_row][hosed_column].status != rf_ds_failed) { raidPtr->Disks[hosed_row] [hosed_column].status = rf_ds_failed; raidPtr->numFailures++; raidPtr->status[hosed_row] = rf_rs_degraded; } } } else { too_fatal = 1; } if (cfgPtr->parityConfig == '0') { /* * We've identified two different mod counters. * RAID 0 can't cope with that, so we'll punt. */ too_fatal = 1; } } raidPtr->mod_counter = mod_number; if (too_fatal) { /* * We've had both a serial number mismatch, and a mod_counter * mismatch -- and they involved two different components !!! * Bail -- make things fail so that the user must force * the issue... */ hosed_row = -1; hosed_column = -1; } if (num_ser > 2) { printf("raid%d: Too many different serial numbers !\n", raidPtr->raidid); } if (num_mod > 2) { printf("raid%d: Too many different mod counters !\n", raidPtr->raidid); } /* * We start by assuming the parity will be good, and flee from * that notion at the slightest sign of trouble. */ parity_good = RF_RAID_CLEAN; for (r = 0; r < raidPtr->numRow; r++) { for (c = 0; c < raidPtr->numCol; c++) { dev_name = &cfgPtr->devnames[r][c][0]; ci_label = &raidPtr->raid_cinfo[r][c].ci_label; if ((r == hosed_row) && (c == hosed_column)) { printf("raid%d: Ignoring %s.\n", raidPtr->raidid, dev_name); } else { rf_print_label_status(raidPtr, r, c, dev_name, ci_label); if (rf_check_label_vitals(raidPtr, r, c, dev_name, ci_label, serial_number, mod_number)) { fatal_error = 1; } if (ci_label->clean != RF_RAID_CLEAN) { parity_good = RF_RAID_DIRTY; } } } } if (fatal_error) { parity_good = RF_RAID_DIRTY; } /* We note the state of the parity. */ raidPtr->parity_good = parity_good; return(fatal_error); } int rf_add_hot_spare(RF_Raid_t *raidPtr, RF_SingleComponent_t *sparePtr) { RF_RaidDisk_t *disks; RF_DiskQueue_t *spareQueues; int ret; unsigned int bs; int spare_number; #if 0 printf("Just in rf_add_hot_spare: %d.\n", raidPtr->numSpare); printf("Num col: %d.\n", raidPtr->numCol); #endif if (raidPtr->numSpare >= RF_MAXSPARE) { RF_ERRORMSG1("Too many spares: %d.\n", raidPtr->numSpare); return(EINVAL); } RF_LOCK_MUTEX(raidPtr->mutex); /* The beginning of the spares... */ disks = &raidPtr->Disks[0][raidPtr->numCol]; spare_number = raidPtr->numSpare; ret = rf_ConfigureDisk(raidPtr, sparePtr->component_name, &disks[spare_number], 0, raidPtr->numCol + spare_number); if (ret) goto fail; if (disks[spare_number].status != rf_ds_optimal) { RF_ERRORMSG1("Warning: spare disk %s failed TUR.\n", sparePtr->component_name); ret = EINVAL; goto fail; } else { disks[spare_number].status = rf_ds_spare; DPRINTF6("Spare Disk %d: dev %s numBlocks %ld blockSize %d" " (%ld MB).\n", spare_number, disks[spare_number].devname, (long int) disks[spare_number].numBlocks, disks[spare_number].blockSize, (long int) disks[spare_number].numBlocks * disks[spare_number].blockSize / 1024 / 1024); } /* Check sizes and block sizes on the spare disk. */ bs = 1 << raidPtr->logBytesPerSector; if (disks[spare_number].blockSize != bs) { RF_ERRORMSG3("Block size of %d on spare disk %s is not" " the same as on other disks (%d).\n", disks[spare_number].blockSize, disks[spare_number].devname, bs); ret = EINVAL; goto fail; } if (disks[spare_number].numBlocks < raidPtr->sectorsPerDisk) { RF_ERRORMSG3("Spare disk %s (%d blocks) is too small to serve" " as a spare (need %ld blocks).\n", disks[spare_number].devname, disks[spare_number].blockSize, (long int) raidPtr->sectorsPerDisk); ret = EINVAL; goto fail; } else { if (disks[spare_number].numBlocks > raidPtr->sectorsPerDisk) { RF_ERRORMSG2("Warning: truncating spare disk %s to %ld" " blocks.\n", disks[spare_number].devname, (long int) raidPtr->sectorsPerDisk); disks[spare_number].numBlocks = raidPtr->sectorsPerDisk; } } spareQueues = &raidPtr->Queues[0][raidPtr->numCol]; ret = rf_ConfigureDiskQueue(raidPtr, &spareQueues[spare_number], 0, raidPtr->numCol + spare_number, raidPtr->qType, raidPtr->sectorsPerDisk, raidPtr->Disks[0][raidPtr->numCol + spare_number].dev, raidPtr->maxOutstanding, &raidPtr->shutdownList, raidPtr->cleanupList); raidPtr->numSpare++; RF_UNLOCK_MUTEX(raidPtr->mutex); return (0); fail: RF_UNLOCK_MUTEX(raidPtr->mutex); return(ret); } int rf_remove_hot_spare(RF_Raid_t *raidPtr, RF_SingleComponent_t *sparePtr) { int spare_number; if (raidPtr->numSpare == 0) { printf("No spares to remove !\n"); return(EINVAL); } spare_number = sparePtr->column; return(EINVAL); /* XXX Not implemented yet. */ #if 0 if (spare_number < 0 || spare_number > raidPtr->numSpare) { return(EINVAL); } /* Verify that this spare isn't in use... */ /* It's gone... */ raidPtr->numSpare--; return (0); #endif } int rf_delete_component(RF_Raid_t *raidPtr, RF_SingleComponent_t *component) { RF_RaidDisk_t *disks; if ((component->row < 0) || (component->row >= raidPtr->numRow) || (component->column < 0) || (component->column >= raidPtr->numCol)) { return(EINVAL); } disks = &raidPtr->Disks[component->row][component->column]; /* 1. This component must be marked as 'failed'. */ return(EINVAL); /* Not implemented yet. */ } int rf_incorporate_hot_spare(RF_Raid_t *raidPtr, RF_SingleComponent_t *component) { /* * Issues here include how to 'move' this in if there is IO * taking place (e.g. component queues and such). */ return(EINVAL); /* Not implemented yet. */ }