/* $OpenBSD: rf_driver.c,v 1.5 1999/08/04 13:10:54 peter Exp $ */ /* $NetBSD: rf_driver.c,v 1.12 1999/07/19 01:36:07 oster Exp $ */ /*- * Copyright (c) 1999 The NetBSD Foundation, Inc. * All rights reserved. * * This code is derived from software contributed to The NetBSD Foundation * by Greg Oster * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the NetBSD * Foundation, Inc. and its contributors. * 4. Neither the name of The NetBSD Foundation nor the names of its * contributors may be used to endorse or promote products derived * from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. */ /* * Copyright (c) 1995 Carnegie-Mellon University. * All rights reserved. * * Author: Mark Holland, Khalil Amiri, Claudson Bornstein, William V. Courtright II, * Robby Findler, Daniel Stodolsky, Rachad Youssef, Jim Zelenka * * Permission to use, copy, modify and distribute this software and * its documentation is hereby granted, provided that both the copyright * notice and this permission notice appear in all copies of the * software, derivative works or modified versions, and any portions * thereof, and that both notices appear in supporting documentation. * * CARNEGIE MELLON ALLOWS FREE USE OF THIS SOFTWARE IN ITS "AS IS" * CONDITION. CARNEGIE MELLON DISCLAIMS ANY LIABILITY OF ANY KIND * FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE. * * Carnegie Mellon requests users of this software to return to * * Software Distribution Coordinator or Software.Distribution@CS.CMU.EDU * School of Computer Science * Carnegie Mellon University * Pittsburgh PA 15213-3890 * * any improvements or extensions that they make and grant Carnegie the * rights to redistribute these changes. */ /****************************************************************************** * * rf_driver.c -- main setup, teardown, and access routines for the RAID driver * * all routines are prefixed with rf_ (raidframe), to avoid conficts. * ******************************************************************************/ #include #include #include #include #include #ifdef __NetBSD__ #include #endif #include "rf_archs.h" #include "rf_threadstuff.h" #include #include "rf_raid.h" #include "rf_dag.h" #include "rf_aselect.h" #include "rf_diskqueue.h" #include "rf_parityscan.h" #include "rf_alloclist.h" #include "rf_threadid.h" #include "rf_dagutils.h" #include "rf_utils.h" #include "rf_etimer.h" #include "rf_acctrace.h" #include "rf_configure.h" #include "rf_general.h" #include "rf_desc.h" #include "rf_states.h" #include "rf_freelist.h" #include "rf_decluster.h" #include "rf_map.h" #include "rf_diskthreads.h" #include "rf_revent.h" #include "rf_callback.h" #include "rf_engine.h" #include "rf_memchunk.h" #include "rf_mcpair.h" #include "rf_nwayxor.h" #include "rf_debugprint.h" #include "rf_copyback.h" #if !defined(__NetBSD__) && !defined(__OpenBSD__) #include "rf_camlayer.h" #endif #include "rf_driver.h" #include "rf_options.h" #include "rf_shutdown.h" #include "rf_sys.h" #include "rf_cpuutil.h" #include #if DKUSAGE > 0 #include #include #include #include #include #endif /* DKUSAGE > 0 */ /* rad == RF_RaidAccessDesc_t */ static RF_FreeList_t *rf_rad_freelist; #define RF_MAX_FREE_RAD 128 #define RF_RAD_INC 16 #define RF_RAD_INITIAL 32 /* debug variables */ char rf_panicbuf[2048]; /* a buffer to hold an error msg when we panic */ /* main configuration routines */ static int raidframe_booted = 0; static void rf_ConfigureDebug(RF_Config_t * cfgPtr); static void set_debug_option(char *name, long val); static void rf_UnconfigureArray(void); static int init_rad(RF_RaidAccessDesc_t *); static void clean_rad(RF_RaidAccessDesc_t *); static void rf_ShutdownRDFreeList(void *); static int rf_ConfigureRDFreeList(RF_ShutdownList_t **); void rf_UnconfigureVnodes( RF_Raid_t * ); /* XXX move these to their own .h file! */ int raidwrite_component_label(dev_t, struct vnode *, RF_ComponentLabel_t *); int raidread_component_label(dev_t, struct vnode *, RF_ComponentLabel_t *); int raidmarkclean(dev_t dev, struct vnode *b_vp,int); void rf_update_component_labels( RF_Raid_t *); RF_DECLARE_MUTEX(rf_printf_mutex) /* debug only: avoids interleaved * printfs by different stripes */ RF_DECLARE_GLOBAL_THREADID /* declarations for threadid.h */ #define SIGNAL_QUIESCENT_COND(_raid_) wakeup(&((_raid_)->accesses_suspended)) #define WAIT_FOR_QUIESCENCE(_raid_) \ tsleep(&((_raid_)->accesses_suspended),PRIBIO,"raidframe quiesce", 0); #if DKUSAGE > 0 #define IO_BUF_ERR(bp, err, unit) { \ bp->b_flags |= B_ERROR; \ bp->b_resid = bp->b_bcount; \ bp->b_error = err; \ RF_DKU_END_IO(unit, bp); \ biodone(bp); \ } #else #define IO_BUF_ERR(bp, err, unit) { \ bp->b_flags |= B_ERROR; \ bp->b_resid = bp->b_bcount; \ bp->b_error = err; \ RF_DKU_END_IO(unit); \ biodone(bp); \ } #endif /* DKUSAGE > 0 */ static int configureCount = 0; /* number of active configurations */ static int isconfigged = 0; /* is basic raidframe (non per-array) * stuff configged */ RF_DECLARE_STATIC_MUTEX(configureMutex) /* used to lock the configuration * stuff */ static RF_ShutdownList_t *globalShutdown; /* non array-specific * stuff */ static int rf_ConfigureRDFreeList(RF_ShutdownList_t ** listp); /* called at system boot time */ int rf_BootRaidframe() { int rc; if (raidframe_booted) return (EBUSY); raidframe_booted = 1; #if RF_DEBUG_ATOMIC > 0 rf_atent_init(); #endif /* RF_DEBUG_ATOMIC > 0 */ rf_setup_threadid(); rf_assign_threadid(); rc = rf_mutex_init(&configureMutex); if (rc) { RF_ERRORMSG3("Unable to init mutex file %s line %d rc=%d\n", __FILE__, __LINE__, rc); RF_PANIC(); } configureCount = 0; isconfigged = 0; globalShutdown = NULL; return (0); } /* * This function is really just for debugging user-level stuff: it * frees up all memory, other RAIDframe resources which might otherwise * be kept around. This is used with systems like "sentinel" to detect * memory leaks. */ int rf_UnbootRaidframe() { int rc; RF_LOCK_MUTEX(configureMutex); if (configureCount) { RF_UNLOCK_MUTEX(configureMutex); return (EBUSY); } raidframe_booted = 0; RF_UNLOCK_MUTEX(configureMutex); rc = rf_mutex_destroy(&configureMutex); if (rc) { RF_ERRORMSG3("Unable to destroy mutex file %s line %d rc=%d\n", __FILE__, __LINE__, rc); RF_PANIC(); } #if RF_DEBUG_ATOMIC > 0 rf_atent_shutdown(); #endif /* RF_DEBUG_ATOMIC > 0 */ return (0); } /* * Called whenever an array is shutdown */ static void rf_UnconfigureArray() { int rc; RF_LOCK_MUTEX(configureMutex); if (--configureCount == 0) { /* if no active configurations, shut * everything down */ isconfigged = 0; rc = rf_ShutdownList(&globalShutdown); if (rc) { RF_ERRORMSG1("RAIDFRAME: unable to do global shutdown, rc=%d\n", rc); } rf_shutdown_threadid(); /* * We must wait until now, because the AllocList module * uses the DebugMem module. */ if (rf_memDebug) rf_print_unfreed(); } RF_UNLOCK_MUTEX(configureMutex); } /* * Called to shut down an array. */ int rf_Shutdown(raidPtr) RF_Raid_t *raidPtr; { if (!raidPtr->valid) { RF_ERRORMSG("Attempt to shut down unconfigured RAIDframe driver. Aborting shutdown\n"); return (EINVAL); } /* * wait for outstanding IOs to land * As described in rf_raid.h, we use the rad_freelist lock * to protect the per-array info about outstanding descs * since we need to do freelist locking anyway, and this * cuts down on the amount of serialization we've got going * on. */ RF_FREELIST_DO_LOCK(rf_rad_freelist); if (raidPtr->waitShutdown) { RF_FREELIST_DO_UNLOCK(rf_rad_freelist); return (EBUSY); } raidPtr->waitShutdown = 1; while (raidPtr->nAccOutstanding) { RF_WAIT_COND(raidPtr->outstandingCond, RF_FREELIST_MUTEX_OF(rf_rad_freelist)); } RF_FREELIST_DO_UNLOCK(rf_rad_freelist); raidPtr->valid = 0; rf_update_component_labels(raidPtr); rf_UnconfigureVnodes(raidPtr); rf_ShutdownList(&raidPtr->shutdownList); rf_UnconfigureArray(); return (0); } void rf_UnconfigureVnodes( raidPtr ) RF_Raid_t *raidPtr; { int r,c; struct proc *p; /* We take this opportunity to close the vnodes like we should.. */ p = raidPtr->proc; /* XXX */ for (r = 0; r < raidPtr->numRow; r++) { for (c = 0; c < raidPtr->numCol; c++) { printf("Closing vnode for row: %d col: %d\n", r, c); if (raidPtr->raid_cinfo[r][c].ci_vp) { VOP_UNLOCK(raidPtr->raid_cinfo[r][c].ci_vp, 0, p); (void) vn_close(raidPtr->raid_cinfo[r][c].ci_vp, FREAD | FWRITE, p->p_ucred, p); raidPtr->raid_cinfo[r][c].ci_vp = NULL; } else { printf("vnode was NULL\n"); } } } for (r = 0; r < raidPtr->numSpare; r++) { printf("Closing vnode for spare: %d\n", r); if (raidPtr->raid_cinfo[0][raidPtr->numCol + r].ci_vp) { VOP_UNLOCK(raidPtr->raid_cinfo[0][raidPtr->numCol + r].ci_vp, 0, p); (void) vn_close(raidPtr->raid_cinfo[0][raidPtr->numCol + r].ci_vp, FREAD | FWRITE, p->p_ucred, p); raidPtr->raid_cinfo[0][raidPtr->numCol + r].ci_vp = NULL; } else { printf("vnode was NULL\n"); } } } #define DO_INIT_CONFIGURE(f) { \ rc = f (&globalShutdown); \ if (rc) { \ RF_ERRORMSG2("RAIDFRAME: failed %s with %d\n", RF_STRING(f), rc); \ rf_ShutdownList(&globalShutdown); \ configureCount--; \ RF_UNLOCK_MUTEX(configureMutex); \ return(rc); \ } \ } #define DO_RAID_FAIL() { \ rf_UnconfigureVnodes(raidPtr); \ rf_ShutdownList(&raidPtr->shutdownList); \ rf_UnconfigureArray(); \ } #define DO_RAID_INIT_CONFIGURE(f) { \ rc = f (&raidPtr->shutdownList, raidPtr, cfgPtr); \ if (rc) { \ RF_ERRORMSG2("RAIDFRAME: failed %s with %d\n", RF_STRING(f), rc); \ DO_RAID_FAIL(); \ return(rc); \ } \ } #define DO_RAID_MUTEX(_m_) { \ rc = rf_create_managed_mutex(&raidPtr->shutdownList, (_m_)); \ if (rc) { \ RF_ERRORMSG3("Unable to init mutex file %s line %d rc=%d\n", \ __FILE__, __LINE__, rc); \ DO_RAID_FAIL(); \ return(rc); \ } \ } #define DO_RAID_COND(_c_) { \ rc = rf_create_managed_cond(&raidPtr->shutdownList, (_c_)); \ if (rc) { \ RF_ERRORMSG3("Unable to init cond file %s line %d rc=%d\n", \ __FILE__, __LINE__, rc); \ DO_RAID_FAIL(); \ return(rc); \ } \ } int rf_Configure(raidPtr, cfgPtr) RF_Raid_t *raidPtr; RF_Config_t *cfgPtr; { RF_RowCol_t row, col; int i, rc; int unit; struct proc *p; if (raidPtr->valid) { RF_ERRORMSG("RAIDframe configuration not shut down. Aborting configure.\n"); return (EINVAL); } RF_LOCK_MUTEX(configureMutex); configureCount++; if (isconfigged == 0) { rc = rf_create_managed_mutex(&globalShutdown, &rf_printf_mutex); if (rc) { RF_ERRORMSG3("Unable to init mutex file %s line %d rc=%d\n", __FILE__, __LINE__, rc); rf_ShutdownList(&globalShutdown); return (rc); } /* initialize globals */ printf("RAIDFRAME: protectedSectors is %ld\n", rf_protectedSectors); rf_clear_debug_print_buffer(); DO_INIT_CONFIGURE(rf_ConfigureAllocList); /* * Yes, this does make debugging general to the whole system instead * of being array specific. Bummer, drag. */ rf_ConfigureDebug(cfgPtr); DO_INIT_CONFIGURE(rf_ConfigureDebugMem); DO_INIT_CONFIGURE(rf_ConfigureAccessTrace); DO_INIT_CONFIGURE(rf_ConfigureMapModule); DO_INIT_CONFIGURE(rf_ConfigureReconEvent); DO_INIT_CONFIGURE(rf_ConfigureCallback); DO_INIT_CONFIGURE(rf_ConfigureMemChunk); DO_INIT_CONFIGURE(rf_ConfigureRDFreeList); DO_INIT_CONFIGURE(rf_ConfigureNWayXor); DO_INIT_CONFIGURE(rf_ConfigureStripeLockFreeList); DO_INIT_CONFIGURE(rf_ConfigureMCPair); #if !defined(__NetBSD__) && !defined(__OpenBSD__) DO_INIT_CONFIGURE(rf_ConfigureCamLayer); #endif DO_INIT_CONFIGURE(rf_ConfigureDAGs); DO_INIT_CONFIGURE(rf_ConfigureDAGFuncs); DO_INIT_CONFIGURE(rf_ConfigureDebugPrint); DO_INIT_CONFIGURE(rf_ConfigureReconstruction); DO_INIT_CONFIGURE(rf_ConfigureCopyback); DO_INIT_CONFIGURE(rf_ConfigureDiskQueueSystem); DO_INIT_CONFIGURE(rf_ConfigureCpuMonitor); isconfigged = 1; } RF_UNLOCK_MUTEX(configureMutex); /* * Null out the entire raid descriptor to avoid problems when we reconfig. * This also clears the valid bit. */ /* XXX this clearing should be moved UP to outside of here.... that, * or rf_Configure() needs to take more arguments... XXX */ unit = raidPtr->raidid; p = raidPtr->proc; /* XXX save these... */ bzero((char *) raidPtr, sizeof(RF_Raid_t)); raidPtr->raidid = unit; raidPtr->proc = p; /* XXX and then recover them.. */ DO_RAID_MUTEX(&raidPtr->mutex); /* set up the cleanup list. Do this after ConfigureDebug so that * value of memDebug will be set */ rf_MakeAllocList(raidPtr->cleanupList); if (raidPtr->cleanupList == NULL) { DO_RAID_FAIL(); return (ENOMEM); } rc = rf_ShutdownCreate(&raidPtr->shutdownList, (void (*) (void *)) rf_FreeAllocList, raidPtr->cleanupList); if (rc) { RF_ERRORMSG3("Unable to add to shutdown list file %s line %d rc=%d\n", __FILE__, __LINE__, rc); DO_RAID_FAIL(); return (rc); } raidPtr->numRow = cfgPtr->numRow; raidPtr->numCol = cfgPtr->numCol; raidPtr->numSpare = cfgPtr->numSpare; /* XXX we don't even pretend to support more than one row in the * kernel... */ if (raidPtr->numRow != 1) { RF_ERRORMSG("Only one row supported in kernel.\n"); DO_RAID_FAIL(); return (EINVAL); } RF_CallocAndAdd(raidPtr->status, raidPtr->numRow, sizeof(RF_RowStatus_t), (RF_RowStatus_t *), raidPtr->cleanupList); if (raidPtr->status == NULL) { DO_RAID_FAIL(); return (ENOMEM); } RF_CallocAndAdd(raidPtr->reconControl, raidPtr->numRow, sizeof(RF_ReconCtrl_t *), (RF_ReconCtrl_t **), raidPtr->cleanupList); if (raidPtr->reconControl == NULL) { DO_RAID_FAIL(); return (ENOMEM); } for (i = 0; i < raidPtr->numRow; i++) { raidPtr->status[i] = rf_rs_optimal; raidPtr->reconControl[i] = NULL; } DO_RAID_INIT_CONFIGURE(rf_ConfigureEngine); DO_RAID_INIT_CONFIGURE(rf_ConfigureStripeLocks); DO_RAID_COND(&raidPtr->outstandingCond); raidPtr->nAccOutstanding = 0; raidPtr->waitShutdown = 0; DO_RAID_MUTEX(&raidPtr->access_suspend_mutex); DO_RAID_COND(&raidPtr->quiescent_cond); DO_RAID_COND(&raidPtr->waitForReconCond); DO_RAID_MUTEX(&raidPtr->recon_done_proc_mutex); DO_RAID_INIT_CONFIGURE(rf_ConfigureDisks); DO_RAID_INIT_CONFIGURE(rf_ConfigureSpareDisks); /* do this after ConfigureDisks & ConfigureSpareDisks to be sure dev * no. is set */ DO_RAID_INIT_CONFIGURE(rf_ConfigureDiskQueues); DO_RAID_INIT_CONFIGURE(rf_ConfigureLayout); DO_RAID_INIT_CONFIGURE(rf_ConfigurePSStatus); for (row = 0; row < raidPtr->numRow; row++) { for (col = 0; col < raidPtr->numCol; col++) { /* * XXX better distribution */ raidPtr->hist_diskreq[row][col] = 0; } } if (rf_keepAccTotals) { raidPtr->keep_acc_totals = 1; } rf_StartUserStats(raidPtr); raidPtr->valid = 1; return (0); } static int init_rad(desc) RF_RaidAccessDesc_t *desc; { int rc; rc = rf_mutex_init(&desc->mutex); if (rc) { RF_ERRORMSG3("Unable to init mutex file %s line %d rc=%d\n", __FILE__, __LINE__, rc); return (rc); } rc = rf_cond_init(&desc->cond); if (rc) { RF_ERRORMSG3("Unable to init cond file %s line %d rc=%d\n", __FILE__, __LINE__, rc); rf_mutex_destroy(&desc->mutex); return (rc); } return (0); } static void clean_rad(desc) RF_RaidAccessDesc_t *desc; { rf_mutex_destroy(&desc->mutex); rf_cond_destroy(&desc->cond); } static void rf_ShutdownRDFreeList(ignored) void *ignored; { RF_FREELIST_DESTROY_CLEAN(rf_rad_freelist, next, (RF_RaidAccessDesc_t *), clean_rad); } static int rf_ConfigureRDFreeList(listp) RF_ShutdownList_t **listp; { int rc; RF_FREELIST_CREATE(rf_rad_freelist, RF_MAX_FREE_RAD, RF_RAD_INC, sizeof(RF_RaidAccessDesc_t)); if (rf_rad_freelist == NULL) { return (ENOMEM); } rc = rf_ShutdownCreate(listp, rf_ShutdownRDFreeList, NULL); if (rc) { RF_ERRORMSG3("Unable to add to shutdown list file %s line %d rc=%d\n", __FILE__, __LINE__, rc); rf_ShutdownRDFreeList(NULL); return (rc); } RF_FREELIST_PRIME_INIT(rf_rad_freelist, RF_RAD_INITIAL, next, (RF_RaidAccessDesc_t *), init_rad); return (0); } RF_RaidAccessDesc_t * rf_AllocRaidAccDesc( RF_Raid_t * raidPtr, RF_IoType_t type, RF_RaidAddr_t raidAddress, RF_SectorCount_t numBlocks, caddr_t bufPtr, void *bp, RF_DagHeader_t ** paramDAG, RF_AccessStripeMapHeader_t ** paramASM, RF_RaidAccessFlags_t flags, void (*cbF) (struct buf *), void *cbA, RF_AccessState_t * states) { RF_RaidAccessDesc_t *desc; RF_FREELIST_GET_INIT_NOUNLOCK(rf_rad_freelist, desc, next, (RF_RaidAccessDesc_t *), init_rad); if (raidPtr->waitShutdown) { /* * Actually, we're shutting the array down. Free the desc * and return NULL. */ RF_FREELIST_DO_UNLOCK(rf_rad_freelist); RF_FREELIST_FREE_CLEAN(rf_rad_freelist, desc, next, clean_rad); return (NULL); } raidPtr->nAccOutstanding++; RF_FREELIST_DO_UNLOCK(rf_rad_freelist); desc->raidPtr = (void *) raidPtr; desc->type = type; desc->raidAddress = raidAddress; desc->numBlocks = numBlocks; desc->bufPtr = bufPtr; desc->bp = bp; desc->paramDAG = paramDAG; desc->paramASM = paramASM; desc->flags = flags; desc->states = states; desc->state = 0; desc->status = 0; bzero((char *) &desc->tracerec, sizeof(RF_AccTraceEntry_t)); desc->callbackFunc = (void (*) (RF_CBParam_t)) cbF; /* XXX */ desc->callbackArg = cbA; desc->next = NULL; desc->head = desc; desc->numPending = 0; desc->cleanupList = NULL; rf_MakeAllocList(desc->cleanupList); rf_get_threadid(desc->tid); return (desc); } void rf_FreeRaidAccDesc(RF_RaidAccessDesc_t * desc) { RF_Raid_t *raidPtr = desc->raidPtr; RF_ASSERT(desc); rf_FreeAllocList(desc->cleanupList); RF_FREELIST_FREE_CLEAN_NOUNLOCK(rf_rad_freelist, desc, next, clean_rad); raidPtr->nAccOutstanding--; if (raidPtr->waitShutdown) { RF_SIGNAL_COND(raidPtr->outstandingCond); } RF_FREELIST_DO_UNLOCK(rf_rad_freelist); } /********************************************************************* * Main routine for performing an access. * Accesses are retried until a DAG can not be selected. This occurs * when either the DAG library is incomplete or there are too many * failures in a parity group. ********************************************************************/ int rf_DoAccess( RF_Raid_t * raidPtr, RF_IoType_t type, int async_flag, RF_RaidAddr_t raidAddress, RF_SectorCount_t numBlocks, caddr_t bufPtr, void *bp_in, RF_DagHeader_t ** paramDAG, RF_AccessStripeMapHeader_t ** paramASM, RF_RaidAccessFlags_t flags, RF_RaidAccessDesc_t ** paramDesc, void (*cbF) (struct buf *), void *cbA) /* type should be read or write async_flag should be RF_TRUE or RF_FALSE bp_in is a buf pointer. void * to facilitate ignoring it outside the kernel */ { int tid; RF_RaidAccessDesc_t *desc; caddr_t lbufPtr = bufPtr; struct buf *bp = (struct buf *) bp_in; #if DFSTRACE > 0 struct { RF_uint64 raidAddr; int numBlocks; char type; } dfsrecord; #endif /* DFSTRACE > 0 */ raidAddress += rf_raidSectorOffset; if (!raidPtr->valid) { RF_ERRORMSG("RAIDframe driver not successfully configured. Rejecting access.\n"); IO_BUF_ERR(bp, EINVAL, raidPtr->raidid); return (EINVAL); } #if defined(_KERNEL) && DFSTRACE > 0 if (rf_DFSTraceAccesses) { dfsrecord.raidAddr = raidAddress; dfsrecord.numBlocks = numBlocks; dfsrecord.type = type; dfs_log(DFS_NOTE, (char *) &dfsrecord, sizeof(dfsrecord), 0); } #endif /* _KERNEL && DFSTRACE > 0 */ rf_get_threadid(tid); if (rf_accessDebug) { printf("logBytes is: %d %d %d\n", raidPtr->raidid, raidPtr->logBytesPerSector, (int) rf_RaidAddressToByte(raidPtr, numBlocks)); printf("[%d] %s raidAddr %d (stripeid %d-%d) numBlocks %d (%d bytes) buf 0x%lx\n", tid, (type == RF_IO_TYPE_READ) ? "READ" : "WRITE", (int) raidAddress, (int) rf_RaidAddressToStripeID(&raidPtr->Layout, raidAddress), (int) rf_RaidAddressToStripeID(&raidPtr->Layout, raidAddress + numBlocks - 1), (int) numBlocks, (int) rf_RaidAddressToByte(raidPtr, numBlocks), (long) bufPtr); } if (raidAddress + numBlocks > raidPtr->totalSectors) { printf("DoAccess: raid addr %lu too large to access %lu sectors. Max legal addr is %lu\n", (u_long) raidAddress, (u_long) numBlocks, (u_long) raidPtr->totalSectors); if (type == RF_IO_TYPE_READ) { IO_BUF_ERR(bp, ENOSPC, raidPtr->raidid); return (ENOSPC); } else { IO_BUF_ERR(bp, ENOSPC, raidPtr->raidid); return (ENOSPC); } } desc = rf_AllocRaidAccDesc(raidPtr, type, raidAddress, numBlocks, lbufPtr, bp, paramDAG, paramASM, flags, cbF, cbA, raidPtr->Layout.map->states); if (desc == NULL) { return (ENOMEM); } RF_ETIMER_START(desc->tracerec.tot_timer); desc->async_flag = async_flag; rf_ContinueRaidAccess(desc); return (0); } /* force the array into reconfigured mode without doing reconstruction */ int rf_SetReconfiguredMode(raidPtr, row, col) RF_Raid_t *raidPtr; int row; int col; { if (!(raidPtr->Layout.map->flags & RF_DISTRIBUTE_SPARE)) { printf("Can't set reconfigured mode in dedicated-spare array\n"); RF_PANIC(); } RF_LOCK_MUTEX(raidPtr->mutex); raidPtr->numFailures++; raidPtr->Disks[row][col].status = rf_ds_dist_spared; raidPtr->status[row] = rf_rs_reconfigured; /* install spare table only if declustering + distributed sparing * architecture. */ if (raidPtr->Layout.map->flags & RF_BD_DECLUSTERED) rf_InstallSpareTable(raidPtr, row, col); RF_UNLOCK_MUTEX(raidPtr->mutex); return (0); } extern int fail_row, fail_col, fail_time; extern int delayed_recon; int rf_FailDisk( RF_Raid_t * raidPtr, int frow, int fcol, int initRecon) { int tid; rf_get_threadid(tid); printf("[%d] Failing disk r%d c%d\n", tid, frow, fcol); RF_LOCK_MUTEX(raidPtr->mutex); raidPtr->numFailures++; raidPtr->Disks[frow][fcol].status = rf_ds_failed; raidPtr->status[frow] = rf_rs_degraded; RF_UNLOCK_MUTEX(raidPtr->mutex); if (initRecon) rf_ReconstructFailedDisk(raidPtr, frow, fcol); return (0); } /* releases a thread that is waiting for the array to become quiesced. * access_suspend_mutex should be locked upon calling this */ void rf_SignalQuiescenceLock(raidPtr, reconDesc) RF_Raid_t *raidPtr; RF_RaidReconDesc_t *reconDesc; { int tid; if (rf_quiesceDebug) { rf_get_threadid(tid); printf("[%d] Signalling quiescence lock\n", tid); } raidPtr->access_suspend_release = 1; if (raidPtr->waiting_for_quiescence) { SIGNAL_QUIESCENT_COND(raidPtr); } } /* suspends all new requests to the array. No effect on accesses that are in flight. */ int rf_SuspendNewRequestsAndWait(raidPtr) RF_Raid_t *raidPtr; { if (rf_quiesceDebug) printf("Suspending new reqs\n"); RF_LOCK_MUTEX(raidPtr->access_suspend_mutex); raidPtr->accesses_suspended++; raidPtr->waiting_for_quiescence = (raidPtr->accs_in_flight == 0) ? 0 : 1; if (raidPtr->waiting_for_quiescence) { raidPtr->access_suspend_release = 0; while (!raidPtr->access_suspend_release) { printf("Suspending: Waiting for Quiesence\n"); WAIT_FOR_QUIESCENCE(raidPtr); raidPtr->waiting_for_quiescence = 0; } } printf("Quiesence reached..\n"); RF_UNLOCK_MUTEX(raidPtr->access_suspend_mutex); return (raidPtr->waiting_for_quiescence); } /* wake up everyone waiting for quiescence to be released */ void rf_ResumeNewRequests(raidPtr) RF_Raid_t *raidPtr; { RF_CallbackDesc_t *t, *cb; if (rf_quiesceDebug) printf("Resuming new reqs\n"); RF_LOCK_MUTEX(raidPtr->access_suspend_mutex); raidPtr->accesses_suspended--; if (raidPtr->accesses_suspended == 0) cb = raidPtr->quiesce_wait_list; else cb = NULL; raidPtr->quiesce_wait_list = NULL; RF_UNLOCK_MUTEX(raidPtr->access_suspend_mutex); while (cb) { t = cb; cb = cb->next; (t->callbackFunc) (t->callbackArg); rf_FreeCallbackDesc(t); } } /***************************************************************************************** * * debug routines * ****************************************************************************************/ static void set_debug_option(name, val) char *name; long val; { RF_DebugName_t *p; for (p = rf_debugNames; p->name; p++) { if (!strcmp(p->name, name)) { *(p->ptr) = val; printf("[Set debug variable %s to %ld]\n", name, val); return; } } RF_ERRORMSG1("Unknown debug string \"%s\"\n", name); } /* would like to use sscanf here, but apparently not available in kernel */ /*ARGSUSED*/ static void rf_ConfigureDebug(cfgPtr) RF_Config_t *cfgPtr; { char *val_p, *name_p, *white_p; long val; int i; rf_ResetDebugOptions(); for (i = 0; cfgPtr->debugVars[i][0] && i < RF_MAXDBGV; i++) { name_p = rf_find_non_white(&cfgPtr->debugVars[i][0]); white_p = rf_find_white(name_p); /* skip to start of 2nd * word */ val_p = rf_find_non_white(white_p); if (*val_p == '0' && *(val_p + 1) == 'x') val = rf_htoi(val_p + 2); else val = rf_atoi(val_p); *white_p = '\0'; set_debug_option(name_p, val); } } /* performance monitoring stuff */ #if !defined(_KERNEL) && !defined(SIMULATE) /* * Throughput stats currently only used in user-level RAIDframe */ static int rf_InitThroughputStats( RF_ShutdownList_t ** listp, RF_Raid_t * raidPtr, RF_Config_t * cfgPtr) { int rc; /* these used by user-level raidframe only */ rc = rf_create_managed_mutex(listp, &raidPtr->throughputstats.mutex); if (rc) { RF_ERRORMSG3("Unable to init mutex file %s line %d rc=%d\n", __FILE__, __LINE__, rc); return (rc); } raidPtr->throughputstats.sum_io_us = 0; raidPtr->throughputstats.num_ios = 0; raidPtr->throughputstats.num_out_ios = 0; return (0); } void rf_StartThroughputStats(RF_Raid_t * raidPtr) { RF_LOCK_MUTEX(raidPtr->throughputstats.mutex); raidPtr->throughputstats.num_ios++; raidPtr->throughputstats.num_out_ios++; if (raidPtr->throughputstats.num_out_ios == 1) RF_GETTIME(raidPtr->throughputstats.start); RF_UNLOCK_MUTEX(raidPtr->throughputstats.mutex); } static void rf_StopThroughputStats(RF_Raid_t * raidPtr) { struct timeval diff; RF_LOCK_MUTEX(raidPtr->throughputstats.mutex); raidPtr->throughputstats.num_out_ios--; if (raidPtr->throughputstats.num_out_ios == 0) { RF_GETTIME(raidPtr->throughputstats.stop); RF_TIMEVAL_DIFF(&raidPtr->throughputstats.start, &raidPtr->throughputstats.stop, &diff); raidPtr->throughputstats.sum_io_us += RF_TIMEVAL_TO_US(diff); } RF_UNLOCK_MUTEX(raidPtr->throughputstats.mutex); } static void rf_PrintThroughputStats(RF_Raid_t * raidPtr) { RF_ASSERT(raidPtr->throughputstats.num_out_ios == 0); if (raidPtr->throughputstats.sum_io_us != 0) { printf("[Througphut: %8.2f IOs/second]\n", raidPtr->throughputstats.num_ios / (raidPtr->throughputstats.sum_io_us / 1000000.0)); } } #endif /* !_KERNEL && !SIMULATE */ void rf_StartUserStats(RF_Raid_t * raidPtr) { RF_GETTIME(raidPtr->userstats.start); raidPtr->userstats.sum_io_us = 0; raidPtr->userstats.num_ios = 0; raidPtr->userstats.num_sect_moved = 0; } void rf_StopUserStats(RF_Raid_t * raidPtr) { RF_GETTIME(raidPtr->userstats.stop); } void rf_UpdateUserStats(raidPtr, rt, numsect) RF_Raid_t *raidPtr; int rt; /* resp time in us */ int numsect; /* number of sectors for this access */ { raidPtr->userstats.sum_io_us += rt; raidPtr->userstats.num_ios++; raidPtr->userstats.num_sect_moved += numsect; } void rf_PrintUserStats(RF_Raid_t * raidPtr) { long elapsed_us, mbs, mbs_frac; struct timeval diff; RF_TIMEVAL_DIFF(&raidPtr->userstats.start, &raidPtr->userstats.stop, &diff); elapsed_us = RF_TIMEVAL_TO_US(diff); /* 2000 sectors per megabyte, 10000000 microseconds per second */ if (elapsed_us) mbs = (raidPtr->userstats.num_sect_moved / 2000) / (elapsed_us / 1000000); else mbs = 0; /* this computes only the first digit of the fractional mb/s moved */ if (elapsed_us) { mbs_frac = ((raidPtr->userstats.num_sect_moved / 200) / (elapsed_us / 1000000)) - (mbs * 10); } else { mbs_frac = 0; } printf("Number of I/Os: %ld\n", raidPtr->userstats.num_ios); printf("Elapsed time (us): %ld\n", elapsed_us); printf("User I/Os per second: %ld\n", RF_DB0_CHECK(raidPtr->userstats.num_ios, (elapsed_us / 1000000))); printf("Average user response time: %ld us\n", RF_DB0_CHECK(raidPtr->userstats.sum_io_us, raidPtr->userstats.num_ios)); printf("Total sectors moved: %ld\n", raidPtr->userstats.num_sect_moved); printf("Average access size (sect): %ld\n", RF_DB0_CHECK(raidPtr->userstats.num_sect_moved, raidPtr->userstats.num_ios)); printf("Achieved data rate: %ld.%ld MB/sec\n", mbs, mbs_frac); }