/* $OpenBSD: rf_openbsdkintf.c,v 1.17 2002/05/28 23:38:10 tdeval Exp $ */ /* $NetBSD: rf_netbsdkintf.c,v 1.109 2001/07/27 03:30:07 oster Exp $ */ /*- * Copyright (c) 1996, 1997, 1998 The NetBSD Foundation, Inc. * All rights reserved. * * This code is derived from software contributed to The NetBSD Foundation * by Greg Oster; Jason R. Thorpe. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the NetBSD * Foundation, Inc. and its contributors. * 4. Neither the name of The NetBSD Foundation nor the names of its * contributors may be used to endorse or promote products derived * from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. */ /* * Copyright (c) 1988 University of Utah. * Copyright (c) 1990, 1993 * The Regents of the University of California. All rights reserved. * * This code is derived from software contributed to Berkeley by * the Systems Programming Group of the University of Utah Computer * Science Department. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * from: Utah $Hdr: cd.c 1.6 90/11/28$ * * @(#)cd.c 8.2 (Berkeley) 11/16/93 */ /* * Copyright (c) 1995 Carnegie-Mellon University. * All rights reserved. * * Authors: Mark Holland, Jim Zelenka * * Permission to use, copy, modify and distribute this software and * its documentation is hereby granted, provided that both the copyright * notice and this permission notice appear in all copies of the * software, derivative works or modified versions, and any portions * thereof, and that both notices appear in supporting documentation. * * CARNEGIE MELLON ALLOWS FREE USE OF THIS SOFTWARE IN ITS "AS IS" * CONDITION. CARNEGIE MELLON DISCLAIMS ANY LIABILITY OF ANY KIND * FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE. * * Carnegie Mellon requests users of this software to return to * * Software Distribution Coordinator or Software.Distribution@CS.CMU.EDU * School of Computer Science * Carnegie Mellon University * Pittsburgh PA 15213-3890 * * any improvements or extensions that they make and grant Carnegie the * rights to redistribute these changes. */ /*********************************************************** * * rf_kintf.c -- the kernel interface routines for RAIDframe * ***********************************************************/ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "raid.h" #include "rf_raid.h" #include "rf_raidframe.h" #include "rf_copyback.h" #include "rf_dag.h" #include "rf_dagflags.h" #include "rf_desc.h" #include "rf_diskqueue.h" #include "rf_acctrace.h" #include "rf_etimer.h" #include "rf_general.h" #include "rf_debugMem.h" #include "rf_kintf.h" #include "rf_options.h" #include "rf_driver.h" #include "rf_parityscan.h" #include "rf_debugprint.h" #include "rf_threadstuff.h" #include "rf_configure.h" int rf_kdebug_level = 0; #ifdef RAIDDEBUG #define db1_printf(a) do if (rf_kdebug_level > 0) printf a; while(0) #else /* RAIDDEBUG */ #define db1_printf(a) (void)0 #endif /* RAIDDEBUG */ static RF_Raid_t **raidPtrs; /* global raid device descriptors */ RF_DECLARE_STATIC_MUTEX(rf_sparet_wait_mutex) /* requests to install a spare table */ static RF_SparetWait_t *rf_sparet_wait_queue; /* responses from installation process */ static RF_SparetWait_t *rf_sparet_resp_queue; /* prototypes */ void rf_KernelWakeupFunc(struct buf *); void rf_InitBP(struct buf *, struct vnode *, unsigned, dev_t, RF_SectorNum_t, RF_SectorCount_t, caddr_t, void (*)(struct buf *), void *, int, struct proc *); void raidinit(RF_Raid_t *); void raidattach(int); int raidsize(dev_t); int raidopen(dev_t, int, int, struct proc *); int raidclose(dev_t, int, int, struct proc *); int raidioctl(dev_t, u_long, caddr_t, int, struct proc *); int raidwrite(dev_t, struct uio *, int); int raidread(dev_t, struct uio *, int); void raidstrategy(struct buf *); int raiddump(dev_t, daddr_t, caddr_t, size_t); /* * Pilfered from ccd.c */ struct raidbuf { struct buf rf_buf; /* new I/O buf. MUST BE FIRST!!! */ struct buf *rf_obp; /* ptr. to original I/O buf */ int rf_flags; /* misc. flags */ RF_DiskQueueData_t *req;/* the request that this was part of.. */ }; #define RAIDGETBUF(rs) pool_get(&(rs)->sc_cbufpool, PR_NOWAIT) #define RAIDPUTBUF(rs, cbp) pool_put(&(rs)->sc_cbufpool, cbp) /* * Some port (like i386) use a swapgeneric that wants to snoop around * in this raid_cd structure. It is preserved (for now) to remain * compatible with such practice. */ struct cfdriver raid_cd = { NULL, "raid", DV_DISK, NULL, 0 }; /* * XXX Not sure if the following should be replacing the raidPtrs above, * or if it should be used in conjunction with that... */ struct raid_softc { int sc_flags; /* flags */ int sc_cflags; /* configuration flags */ size_t sc_size; /* size of the raid device */ char sc_xname[20]; /* XXX external name */ struct disk sc_dkdev; /* generic disk device info */ struct pool sc_cbufpool; /* component buffer pool */ struct buf sc_q; /* used for the device queue */ }; /* sc_flags */ #define RAIDF_INITED 0x01 /* unit has been initialized */ #define RAIDF_WLABEL 0x02 /* label area is writable */ #define RAIDF_LABELLING 0x04 /* unit is currently being labelled */ #define RAIDF_WANTED 0x40 /* someone is waiting to obtain a lock */ #define RAIDF_LOCKED 0x80 /* unit is locked */ #define raidunit(x) DISKUNIT(x) int numraid = 0; /* * Here we define a cfattach structure for inserting any new raid device * into the device tree. This is needed by some archs that look for * bootable devices in there. */ int rf_probe(struct device *, void *, void *); void rf_attach(struct device *, struct device *, void *); int rf_detach(struct device *, int); int rf_activate(struct device *, enum devact); void rf_zeroref(struct device *); struct cfattach raid_ca = { sizeof(struct raid_softc), rf_probe, rf_attach, rf_detach, rf_activate, rf_zeroref }; /* * Allow RAIDOUTSTANDING number of simultaneous IO's to this RAID device. * Be aware that large numbers can allow the driver to consume a lot of * kernel memory, especially on writes, and in degraded mode reads. * * For example: with a stripe width of 64 blocks (32k) and 5 disks, * a single 64K write will typically require 64K for the old data, * 64K for the old parity, and 64K for the new parity, for a total * of 192K (if the parity buffer is not re-used immediately). * Even it if is used immedately, that's still 128K, which when multiplied * by say 10 requests, is 1280K, *on top* of the 640K of incoming data. * * Now in degraded mode, for example, a 64K read on the above setup may * require data reconstruction, which will require *all* of the 4 remaining * disks to participate -- 4 * 32K/disk == 128K again. */ #ifndef RAIDOUTSTANDING #define RAIDOUTSTANDING 6 #endif #define RAIDLABELDEV(dev) \ (MAKEDISKDEV(major((dev)), raidunit((dev)), RAW_PART)) /* declared here, and made public, for the benefit of KVM stuff.. */ struct raid_softc *raid_softc; struct raid_softc **raid_scPtrs; void rf_shutdown_hook(RF_ThreadArg_t); void raidgetdefaultlabel(RF_Raid_t *, struct raid_softc *, struct disklabel *); void raidgetdisklabel(dev_t); void raidmakedisklabel(struct raid_softc *); int raidlock(struct raid_softc *); void raidunlock(struct raid_softc *); void rf_markalldirty(RF_Raid_t *); struct device *raidrootdev; int findblkmajor(struct device *dv); char *findblkname(int); void rf_ReconThread(struct rf_recon_req *); /* XXX what I want is: */ /*void rf_ReconThread(RF_Raid_t *raidPtr); */ void rf_RewriteParityThread(RF_Raid_t *raidPtr); void rf_CopybackThread(RF_Raid_t *raidPtr); void rf_ReconstructInPlaceThread(struct rf_recon_req *); #ifdef RAID_AUTOCONFIG void rf_buildroothack(void *); int rf_reasonable_label(RF_ComponentLabel_t *); #endif RF_AutoConfig_t *rf_find_raid_components(void); RF_ConfigSet_t *rf_create_auto_sets(RF_AutoConfig_t *); int rf_does_it_fit(RF_ConfigSet_t *,RF_AutoConfig_t *); void rf_create_configuration(RF_AutoConfig_t *,RF_Config_t *, RF_Raid_t *); int rf_set_autoconfig(RF_Raid_t *, int); int rf_set_rootpartition(RF_Raid_t *, int); void rf_release_all_vps(RF_ConfigSet_t *); void rf_cleanup_config_set(RF_ConfigSet_t *); int rf_have_enough_components(RF_ConfigSet_t *); int rf_auto_config_set(RF_ConfigSet_t *, int *); #ifdef RAID_AUTOCONFIG static int raidautoconfig = 0; /* Debugging, mostly. Set to 0 to not allow autoconfig to take place. Note that this is overridden by having RAID_AUTOCONFIG as an option in the kernel config file. */ #endif int rf_probe(parent, match_, aux) struct device *parent; void *match_; void *aux; { return 0; } void rf_attach(parent, self, aux) struct device *parent, *self; void *aux; { /* struct raid_softc *raid = (void *)self; */ } int rf_detach(self, flags) struct device *self; int flags; { return 0; } int rf_activate(self, act) struct device *self; enum devact act; { return 0; } void rf_zeroref(self) struct device *self; { } void raidattach(num) int num; { int raidID; int i, rc; #ifdef RAID_AUTOCONFIG RF_AutoConfig_t *ac_list; /* autoconfig list */ RF_ConfigSet_t *config_sets; #endif db1_printf(("raidattach: Asked for %d units\n", num)); if (num <= 0) { #ifdef DIAGNOSTIC panic("raidattach: count <= 0"); #endif return; } /* This is where all the initialization stuff gets done. */ numraid = num; /* Make some space for requested number of units... */ RF_Calloc(raidPtrs, num, sizeof(RF_Raid_t *), (RF_Raid_t **)); if (raidPtrs == NULL) { panic("raidPtrs is NULL!!\n"); } rc = rf_mutex_init(&rf_sparet_wait_mutex); if (rc) { RF_PANIC(); } rf_sparet_wait_queue = rf_sparet_resp_queue = NULL; for (i = 0; i < num; i++) raidPtrs[i] = NULL; rc = rf_BootRaidframe(); if (rc == 0) printf("Kernelized RAIDframe activated\n"); else panic("Serious error booting RAID!!\n"); /* * Put together some datastructures like the CCD device does.. * This lets us lock the device and what-not when it gets opened. */ raid_softc = (struct raid_softc *) malloc(num * sizeof(struct raid_softc), M_RAIDFRAME, M_NOWAIT); if (raid_softc == NULL) { printf("WARNING: no memory for RAIDframe driver\n"); return; } bzero(raid_softc, num * sizeof (struct raid_softc)); raid_scPtrs = (struct raid_softc **) malloc(num * sizeof(struct raid_softc *), M_RAIDFRAME, M_NOWAIT); if (raid_scPtrs == NULL) { printf("WARNING: no memory for RAIDframe driver\n"); return; } bzero(raid_scPtrs, num * sizeof (struct raid_softc *)); raidrootdev = (struct device *)malloc(num * sizeof(struct device), M_RAIDFRAME, M_NOWAIT); if (raidrootdev == NULL) { panic("No memory for RAIDframe driver!!?!?!\n"); } for (raidID = 0; raidID < num; raidID++) { #if 0 SIMPLEQ_INIT(&raid_softc[raidID].sc_q); #endif raidrootdev[raidID].dv_class = DV_DISK; raidrootdev[raidID].dv_cfdata = NULL; raidrootdev[raidID].dv_unit = raidID; raidrootdev[raidID].dv_parent = NULL; raidrootdev[raidID].dv_flags = 0; sprintf(raidrootdev[raidID].dv_xname,"raid%d",raidID); RF_Calloc(raidPtrs[raidID], 1, sizeof (RF_Raid_t), (RF_Raid_t *)); if (raidPtrs[raidID] == NULL) { printf("WARNING: raidPtrs[%d] is NULL\n", raidID); numraid = raidID; return; } } raid_cd.cd_devs = (void **) raid_scPtrs; raid_cd.cd_ndevs = num; #ifdef RAID_AUTOCONFIG raidautoconfig = 1; if (raidautoconfig) { /* 1. locate all RAID components on the system */ #ifdef DEBUG printf("Searching for raid components...\n"); #endif ac_list = rf_find_raid_components(); /* 2. sort them into their respective sets */ config_sets = rf_create_auto_sets(ac_list); /* 3. evaluate each set and configure the valid ones This gets done in rf_buildroothack() */ /* schedule the creation of the thread to do the "/ on RAID" stuff */ rf_buildroothack(config_sets); } #endif } #ifdef RAID_AUTOCONFIG void rf_buildroothack(arg) void *arg; { RF_ConfigSet_t *config_sets = arg; RF_ConfigSet_t *cset; RF_ConfigSet_t *next_cset; int retcode; int raidID; int rootID; int num_root; int majdev; rootID = 0; num_root = 0; cset = config_sets; while(cset != NULL ) { next_cset = cset->next; if (rf_have_enough_components(cset) && cset->ac->clabel->autoconfigure==1) { retcode = rf_auto_config_set(cset,&raidID); if (!retcode) { if (cset->rootable) { rootID = raidID; #ifdef DEBUG printf("eligible root device %d: raid%d\n", num_root, rootID); #endif /* DEBUG */ num_root++; } } else { /* The autoconfig didn't work :( */ #ifdef DEBUG printf("Autoconfig failed with code %d for raid%d\n", retcode, raidID); #endif rf_release_all_vps(cset); } } else { /* we're not autoconfiguring this set... release the associated resources */ rf_release_all_vps(cset); } /* cleanup */ rf_cleanup_config_set(cset); cset = next_cset; } if (boothowto & RB_ASKNAME) { /* We don't auto-config... */ } else { /* They didn't ask, and we found something bootable... */ if (num_root == 1) { majdev = findblkmajor(&raidrootdev[rootID]); if (majdev < 0) boothowto |= RB_ASKNAME; else { rootdev = MAKEDISKDEV(majdev,rootID,0); boothowto |= RB_DFLTROOT; } } else if (num_root > 1) { /* we can't guess.. require the user to answer... */ boothowto |= RB_ASKNAME; } } } #endif void rf_shutdown_hook(arg) RF_ThreadArg_t arg; { int unit; struct raid_softc *rs; RF_Raid_t *raidPtr; /* Don't do it if we are not "safe" */ if (boothowto & RB_NOSYNC) return; raidPtr = (RF_Raid_t *) arg; unit = raidPtr->raidid; rs = &raid_softc[unit]; /* Shutdown the system */ rf_Shutdown(raidPtr); pool_destroy(&rs->sc_cbufpool); /* It's no longer initialized... */ rs->sc_flags &= ~RAIDF_INITED; /* config_detach the device. */ config_detach(device_lookup(&raid_cd, unit), 0); /* Detach the disk. */ disk_detach(&rs->sc_dkdev); } int raidsize(dev) dev_t dev; { struct raid_softc *rs; struct disklabel *lp; int part, unit, omask, size; unit = raidunit(dev); if (unit >= numraid) return (-1); rs = &raid_softc[unit]; if ((rs->sc_flags & RAIDF_INITED) == 0) return (-1); part = DISKPART(dev); omask = rs->sc_dkdev.dk_openmask & (1 << part); lp = rs->sc_dkdev.dk_label; if (omask == 0 && raidopen(dev, 0, S_IFBLK, curproc)) return (-1); if (lp->d_partitions[part].p_fstype != FS_SWAP) size = -1; else size = lp->d_partitions[part].p_size * (lp->d_secsize / DEV_BSIZE); if (omask == 0 && raidclose(dev, 0, S_IFBLK, curproc)) return (-1); return (size); } int raiddump(dev, blkno, va, size) dev_t dev; daddr_t blkno; caddr_t va; size_t size; { /* Not implemented. */ return (ENXIO); } /* ARGSUSED */ int raidopen(dev, flags, fmt, p) dev_t dev; int flags, fmt; struct proc *p; { int unit = raidunit(dev); struct raid_softc *rs; struct disklabel *lp; int part,pmask; int error = 0; if (unit >= numraid) return (ENXIO); rs = &raid_softc[unit]; if ((error = raidlock(rs)) != 0) return (error); lp = rs->sc_dkdev.dk_label; part = DISKPART(dev); pmask = (1 << part); db1_printf( ("Opening raid device number: %d partition: %d\n", unit, part)); if ((rs->sc_flags & RAIDF_INITED) && (rs->sc_dkdev.dk_openmask == 0)) raidgetdisklabel(dev); /* make sure that this partition exists */ if (part != RAW_PART) { db1_printf(("Not a raw partition..\n")); if (((rs->sc_flags & RAIDF_INITED) == 0) || ((part >= lp->d_npartitions) || (lp->d_partitions[part].p_fstype == FS_UNUSED))) { error = ENXIO; raidunlock(rs); db1_printf(("Bailing out...\n")); return (error); } } /* Prevent this unit from being unconfigured while open. */ switch (fmt) { case S_IFCHR: rs->sc_dkdev.dk_copenmask |= pmask; break; case S_IFBLK: rs->sc_dkdev.dk_bopenmask |= pmask; break; } if ((rs->sc_dkdev.dk_openmask == 0) && ((rs->sc_flags & RAIDF_INITED) != 0)) { /* First one... mark things as dirty... Note that we *MUST* have done a configure before this. I DO NOT WANT TO BE SCRIBBLING TO RANDOM COMPONENTS UNTIL IT'S BEEN DETERMINED THAT THEY BELONG TOGETHER!!!!! */ /* XXX should check to see if we're only open for reading here... If so, we needn't do this, but then need some other way of keeping track of what's happened.. */ rf_markalldirty( raidPtrs[unit] ); } rs->sc_dkdev.dk_openmask = rs->sc_dkdev.dk_copenmask | rs->sc_dkdev.dk_bopenmask; raidunlock(rs); return (error); } /* ARGSUSED */ int raidclose(dev, flags, fmt, p) dev_t dev; int flags, fmt; struct proc *p; { int unit = raidunit(dev); struct raid_softc *rs; int error = 0; int part; if (unit >= numraid) return (ENXIO); rs = &raid_softc[unit]; if ((error = raidlock(rs)) != 0) return (error); part = DISKPART(dev); /* ...that much closer to allowing unconfiguration... */ switch (fmt) { case S_IFCHR: rs->sc_dkdev.dk_copenmask &= ~(1 << part); break; case S_IFBLK: rs->sc_dkdev.dk_bopenmask &= ~(1 << part); break; } rs->sc_dkdev.dk_openmask = rs->sc_dkdev.dk_copenmask | rs->sc_dkdev.dk_bopenmask; if ((rs->sc_dkdev.dk_openmask == 0) && ((rs->sc_flags & RAIDF_INITED) != 0)) { /* Last one... device is not unconfigured yet. Device shutdown has taken care of setting the clean bits if RAIDF_INITED is not set mark things as clean... */ db1_printf(("Last one on raid%d. Updating status.\n",unit)); rf_update_component_labels(raidPtrs[unit], RF_FINAL_COMPONENT_UPDATE); } raidunlock(rs); return (0); } void raidstrategy(bp) struct buf *bp; { int s; unsigned int raidID = raidunit(bp->b_dev); RF_Raid_t *raidPtr; struct raid_softc *rs = &raid_softc[raidID]; struct disklabel *lp; int wlabel; s = splbio(); if ((rs->sc_flags & RAIDF_INITED) ==0) { bp->b_error = ENXIO; bp->b_flags |= B_ERROR; bp->b_resid = bp->b_bcount; biodone(bp); goto raidstrategy_end; } if (raidID >= numraid || !raidPtrs[raidID]) { bp->b_error = ENODEV; bp->b_flags |= B_ERROR; bp->b_resid = bp->b_bcount; biodone(bp); goto raidstrategy_end; } raidPtr = raidPtrs[raidID]; if (!raidPtr->valid) { bp->b_error = ENODEV; bp->b_flags |= B_ERROR; bp->b_resid = bp->b_bcount; biodone(bp); goto raidstrategy_end; } if (bp->b_bcount == 0) { db1_printf(("b_bcount is zero..\n")); biodone(bp); goto raidstrategy_end; } lp = rs->sc_dkdev.dk_label; /* * Do bounds checking and adjust transfer. If there's an * error, the bounds check will flag that for us. */ wlabel = rs->sc_flags & (RAIDF_WLABEL | RAIDF_LABELLING); if (DISKPART(bp->b_dev) != RAW_PART) if (bounds_check_with_label(bp, lp, rs->sc_dkdev.dk_cpulabel, wlabel) <= 0) { db1_printf(("Bounds check failed!!:%d %d\n", (int)bp->b_blkno, (int)wlabel)); biodone(bp); goto raidstrategy_end; } bp->b_resid = 0; bp->b_actf = rs->sc_q.b_actf; rs->sc_q.b_actf = bp; rs->sc_q.b_active++; raidstart(raidPtrs[raidID]); raidstrategy_end: splx(s); } /* ARGSUSED */ int raidread(dev, uio, flags) dev_t dev; struct uio *uio; int flags; { int unit = raidunit(dev); struct raid_softc *rs; int part; if (unit >= numraid) return (ENXIO); rs = &raid_softc[unit]; if ((rs->sc_flags & RAIDF_INITED) == 0) return (ENXIO); part = DISKPART(dev); db1_printf(("raidread: unit: %d partition: %d\n", unit, part)); return (physio(raidstrategy, NULL, dev, B_READ, minphys, uio)); } /* ARGSUSED */ int raidwrite(dev, uio, flags) dev_t dev; struct uio *uio; int flags; { int unit = raidunit(dev); struct raid_softc *rs; if (unit >= numraid) return (ENXIO); rs = &raid_softc[unit]; if ((rs->sc_flags & RAIDF_INITED) == 0) return (ENXIO); db1_printf(("raidwrite\n")); return (physio(raidstrategy, NULL, dev, B_WRITE, minphys, uio)); } int raidioctl(dev, cmd, data, flag, p) dev_t dev; u_long cmd; caddr_t data; int flag; struct proc *p; { int unit = raidunit(dev); int error = 0; int part, pmask; struct raid_softc *rs; RF_Config_t *k_cfg, *u_cfg; RF_Raid_t *raidPtr; RF_RaidDisk_t *diskPtr; RF_AccTotals_t *totals; RF_DeviceConfig_t *d_cfg, **ucfgp; u_char *specific_buf; int retcode = 0; int row; int column; struct rf_recon_req *rrcopy, *rr; RF_ComponentLabel_t *clabel; RF_ComponentLabel_t ci_label; RF_ComponentLabel_t **clabel_ptr; RF_SingleComponent_t *sparePtr,*componentPtr; RF_SingleComponent_t hot_spare; RF_SingleComponent_t component; RF_ProgressInfo_t progressInfo, **progressInfoPtr; int i, j, d; if (unit >= numraid) return (ENXIO); rs = &raid_softc[unit]; raidPtr = raidPtrs[unit]; db1_printf(("raidioctl: %d %d %d %d\n", (int)dev, (int)DISKPART(dev), (int)unit, (int)cmd)); /* Must be open for writes for these commands... */ switch (cmd) { case DIOCSDINFO: case DIOCWDINFO: case DIOCWLABEL: if ((flag & FWRITE) == 0) return (EBADF); } /* Must be initialized for these... */ switch (cmd) { case DIOCGDINFO: case DIOCSDINFO: case DIOCWDINFO: case DIOCGPART: case DIOCWLABEL: case DIOCGPDINFO: case RAIDFRAME_SHUTDOWN: case RAIDFRAME_REWRITEPARITY: case RAIDFRAME_GET_INFO: case RAIDFRAME_RESET_ACCTOTALS: case RAIDFRAME_GET_ACCTOTALS: case RAIDFRAME_KEEP_ACCTOTALS: case RAIDFRAME_GET_SIZE: case RAIDFRAME_FAIL_DISK: case RAIDFRAME_COPYBACK: case RAIDFRAME_CHECK_RECON_STATUS: case RAIDFRAME_CHECK_RECON_STATUS_EXT: case RAIDFRAME_GET_COMPONENT_LABEL: case RAIDFRAME_SET_COMPONENT_LABEL: case RAIDFRAME_ADD_HOT_SPARE: case RAIDFRAME_REMOVE_HOT_SPARE: case RAIDFRAME_INIT_LABELS: case RAIDFRAME_REBUILD_IN_PLACE: case RAIDFRAME_CHECK_PARITY: case RAIDFRAME_CHECK_PARITYREWRITE_STATUS: case RAIDFRAME_CHECK_PARITYREWRITE_STATUS_EXT: case RAIDFRAME_CHECK_COPYBACK_STATUS: case RAIDFRAME_CHECK_COPYBACK_STATUS_EXT: case RAIDFRAME_SET_AUTOCONFIG: case RAIDFRAME_SET_ROOT: case RAIDFRAME_DELETE_COMPONENT: case RAIDFRAME_INCORPORATE_HOT_SPARE: if ((rs->sc_flags & RAIDF_INITED) == 0) return (ENXIO); } switch (cmd) { /* Configure the system */ case RAIDFRAME_CONFIGURE: if (raidPtr->valid) { /* There is a valid RAID set running on this unit! */ printf("raid%d: Device already configured!\n",unit); return(EINVAL); } /* * Copy-in the configuration information * data points to a pointer to the configuration structure. */ u_cfg = *((RF_Config_t **)data); RF_Malloc(k_cfg, sizeof (RF_Config_t), (RF_Config_t *)); if (k_cfg == NULL) { return (ENOMEM); } retcode = copyin((caddr_t)u_cfg, (caddr_t)k_cfg, sizeof (RF_Config_t)); if (retcode) { RF_Free(k_cfg, sizeof(RF_Config_t)); return (retcode); } /* * Allocate a buffer for the layout-specific data, * and copy it in. */ if (k_cfg->layoutSpecificSize) { if (k_cfg->layoutSpecificSize > 10000) { /* sanity check */ RF_Free(k_cfg, sizeof(RF_Config_t)); return (EINVAL); } RF_Malloc(specific_buf, k_cfg->layoutSpecificSize, (u_char *)); if (specific_buf == NULL) { RF_Free(k_cfg, sizeof (RF_Config_t)); return (ENOMEM); } retcode = copyin(k_cfg->layoutSpecific, (caddr_t)specific_buf, k_cfg->layoutSpecificSize); if (retcode) { RF_Free(k_cfg, sizeof(RF_Config_t)); RF_Free(specific_buf, k_cfg->layoutSpecificSize); return (retcode); } } else specific_buf = NULL; k_cfg->layoutSpecific = specific_buf; /* * We should do some kind of sanity check on the * configuration. * Store the sum of all the bytes in the last byte? */ /* * Clear the entire RAID descriptor, just to make sure * there is no stale data left in the case of a * reconfiguration */ bzero((char *) raidPtr, sizeof(RF_Raid_t)); /* configure the system */ raidPtr->raidid = unit; retcode = rf_Configure(raidPtr, k_cfg, NULL); if (retcode == 0) { /* allow this many simultaneous IO's to this RAID device */ raidPtr->openings = RAIDOUTSTANDING; raidinit(raidPtr); rf_markalldirty(raidPtr); } /* Free the buffers. No return code here. */ if (k_cfg->layoutSpecificSize) { RF_Free(specific_buf, k_cfg->layoutSpecificSize); } RF_Free(k_cfg, sizeof (RF_Config_t)); return (retcode); case RAIDFRAME_SHUTDOWN: /* Shutdown the system */ if ((error = raidlock(rs)) != 0) return (error); /* * If somebody has a partition mounted, we shouldn't * shutdown. */ part = DISKPART(dev); pmask = (1 << part); if ((rs->sc_dkdev.dk_openmask & ~pmask) || ((rs->sc_dkdev.dk_bopenmask & pmask) && (rs->sc_dkdev.dk_copenmask & pmask))) { raidunlock(rs); return (EBUSY); } if ((retcode = rf_Shutdown(raidPtr)) == 0) { pool_destroy(&rs->sc_cbufpool); /* It's no longer initialized... */ rs->sc_flags &= ~RAIDF_INITED; /* config_detach the device. */ config_detach(device_lookup(&raid_cd, unit), 0); /* Detach the disk. */ disk_detach(&rs->sc_dkdev); } raidunlock(rs); return (retcode); case RAIDFRAME_GET_COMPONENT_LABEL: clabel_ptr = (RF_ComponentLabel_t **) data; /* need to read the component label for the disk indicated by row,column in clabel */ /* For practice, let's get it directly fromdisk, rather than from the in-core copy */ RF_Malloc( clabel, sizeof( RF_ComponentLabel_t ), (RF_ComponentLabel_t *)); if (clabel == NULL) return (ENOMEM); bzero((char *) clabel, sizeof(RF_ComponentLabel_t)); retcode = copyin( *clabel_ptr, clabel, sizeof(RF_ComponentLabel_t)); if (retcode) { RF_Free( clabel, sizeof(RF_ComponentLabel_t)); return(retcode); } row = clabel->row; column = clabel->column; if ((row < 0) || (row >= raidPtr->numRow) || (column < 0) || (column >= raidPtr->numCol)) { return(EINVAL); } raidread_component_label( raidPtr->Disks[row][column].dev, raidPtr->raid_cinfo[row][column].ci_vp, clabel ); retcode = copyout((caddr_t) clabel, (caddr_t) *clabel_ptr, sizeof(RF_ComponentLabel_t)); RF_Free( clabel, sizeof(RF_ComponentLabel_t)); return (retcode); case RAIDFRAME_SET_COMPONENT_LABEL: clabel = (RF_ComponentLabel_t *) data; /* XXX check the label for valid stuff... */ /* Note that some things *should not* get modified -- the user should be re-initing the labels instead of trying to patch things. */ printf("Got component label:\n"); printf("Version: %d\n",clabel->version); printf("Serial Number: %d\n",clabel->serial_number); printf("Mod counter: %d\n",clabel->mod_counter); printf("Row: %d\n", clabel->row); printf("Column: %d\n", clabel->column); printf("Num Rows: %d\n", clabel->num_rows); printf("Num Columns: %d\n", clabel->num_columns); printf("Clean: %d\n", clabel->clean); printf("Status: %d\n", clabel->status); row = clabel->row; column = clabel->column; if ((row < 0) || (row >= raidPtr->numRow) || (column < 0) || (column >= raidPtr->numCol)) { RF_Free( clabel, sizeof(RF_ComponentLabel_t)); return(EINVAL); } /* XXX this isn't allowed to do anything for now :-) */ #if 0 raidwrite_component_label( raidPtr->Disks[row][column].dev, raidPtr->raid_cinfo[row][column].ci_vp, clabel ); #endif return (0); case RAIDFRAME_INIT_LABELS: clabel = (RF_ComponentLabel_t *) data; /* we only want the serial number from the above. We get all the rest of the information from the config that was used to create this RAID set. */ raidPtr->serial_number = clabel->serial_number; raid_init_component_label(raidPtr, &ci_label); ci_label.serial_number = clabel->serial_number; for(row=0;rownumRow;row++) { ci_label.row = row; for(column=0;columnnumCol;column++) { diskPtr = &raidPtr->Disks[row][column]; if (!RF_DEAD_DISK(diskPtr->status)) { ci_label.partitionSize = diskPtr->partitionSize; ci_label.column = column; raidwrite_component_label( raidPtr->Disks[row][column].dev, raidPtr->raid_cinfo[row][column].ci_vp, &ci_label ); } } } return (retcode); case RAIDFRAME_REWRITEPARITY: if (raidPtr->Layout.map->faultsTolerated == 0) { /* Parity for RAID 0 is trivially correct */ raidPtr->parity_good = RF_RAID_CLEAN; return(0); } if (raidPtr->parity_rewrite_in_progress == 1) { /* Re-write is already in progress! */ return(EINVAL); } retcode = RF_CREATE_THREAD(raidPtr->parity_rewrite_thread, rf_RewriteParityThread, raidPtr,"raid_parity"); return (retcode); case RAIDFRAME_SET_AUTOCONFIG: d = rf_set_autoconfig(raidPtr, *(int *) data); printf("New autoconfig value is: %d\n", d); *(int *) data = d; return (retcode); case RAIDFRAME_SET_ROOT: d = rf_set_rootpartition(raidPtr, *(int *) data); printf("New rootpartition value is: %d\n", d); *(int *) data = d; return (retcode); case RAIDFRAME_ADD_HOT_SPARE: sparePtr = (RF_SingleComponent_t *) data; memcpy( &hot_spare, sparePtr, sizeof(RF_SingleComponent_t)); retcode = rf_add_hot_spare(raidPtr, &hot_spare); return(retcode); case RAIDFRAME_REMOVE_HOT_SPARE: return(retcode); case RAIDFRAME_DELETE_COMPONENT: componentPtr = (RF_SingleComponent_t *)data; memcpy( &component, componentPtr, sizeof(RF_SingleComponent_t)); retcode = rf_delete_component(raidPtr, &component); return(retcode); case RAIDFRAME_INCORPORATE_HOT_SPARE: componentPtr = (RF_SingleComponent_t *)data; memcpy( &component, componentPtr, sizeof(RF_SingleComponent_t)); retcode = rf_incorporate_hot_spare(raidPtr, &component); return(retcode); case RAIDFRAME_REBUILD_IN_PLACE: if (raidPtr->Layout.map->faultsTolerated == 0) { /* Can't do this on a RAID 0!! */ return(EINVAL); } if (raidPtr->recon_in_progress == 1) { /* a reconstruct is already in progress! */ return(EINVAL); } componentPtr = (RF_SingleComponent_t *) data; memcpy( &component, componentPtr, sizeof(RF_SingleComponent_t)); row = component.row; column = component.column; printf("Rebuild: %d %d\n",row, column); if ((row < 0) || (row >= raidPtr->numRow) || (column < 0) || (column >= raidPtr->numCol)) { return(EINVAL); } RF_Malloc(rrcopy, sizeof(*rrcopy), (struct rf_recon_req *)); if (rrcopy == NULL) return(ENOMEM); rrcopy->raidPtr = (void *) raidPtr; rrcopy->row = row; rrcopy->col = column; retcode = RF_CREATE_THREAD(raidPtr->recon_thread, rf_ReconstructInPlaceThread, rrcopy,"raid_reconip"); return (retcode); case RAIDFRAME_GET_INFO: if (!raidPtr->valid) return (ENODEV); ucfgp = (RF_DeviceConfig_t **) data; RF_Malloc(d_cfg, sizeof(RF_DeviceConfig_t), (RF_DeviceConfig_t *)); if (d_cfg == NULL) return (ENOMEM); bzero((char *) d_cfg, sizeof(RF_DeviceConfig_t)); d_cfg->rows = raidPtr->numRow; d_cfg->cols = raidPtr->numCol; d_cfg->ndevs = raidPtr->numRow * raidPtr->numCol; if (d_cfg->ndevs >= RF_MAX_DISKS) { RF_Free(d_cfg, sizeof(RF_DeviceConfig_t)); return (ENOMEM); } d_cfg->nspares = raidPtr->numSpare; if (d_cfg->nspares >= RF_MAX_DISKS) { RF_Free(d_cfg, sizeof(RF_DeviceConfig_t)); return (ENOMEM); } d_cfg->maxqdepth = raidPtr->maxQueueDepth; d = 0; for (i = 0; i < d_cfg->rows; i++) { for (j = 0; j < d_cfg->cols; j++) { d_cfg->devs[d] = raidPtr->Disks[i][j]; d++; } } for (j = d_cfg->cols, i = 0; i < d_cfg->nspares; i++, j++) { d_cfg->spares[i] = raidPtr->Disks[0][j]; } retcode = copyout((caddr_t) d_cfg, (caddr_t) * ucfgp, sizeof(RF_DeviceConfig_t)); RF_Free(d_cfg, sizeof(RF_DeviceConfig_t)); return (retcode); case RAIDFRAME_CHECK_PARITY: *(int *) data = raidPtr->parity_good; return (0); case RAIDFRAME_RESET_ACCTOTALS: bzero(&raidPtr->acc_totals, sizeof(raidPtr->acc_totals)); return (0); case RAIDFRAME_GET_ACCTOTALS: totals = (RF_AccTotals_t *) data; *totals = raidPtr->acc_totals; return (0); case RAIDFRAME_KEEP_ACCTOTALS: raidPtr->keep_acc_totals = *(int *)data; return (0); case RAIDFRAME_GET_SIZE: *(int *) data = raidPtr->totalSectors; return (0); /* fail a disk & optionally start reconstruction */ case RAIDFRAME_FAIL_DISK: rr = (struct rf_recon_req *)data; if (rr->row < 0 || rr->row >= raidPtr->numRow || rr->col < 0 || rr->col >= raidPtr->numCol) return (EINVAL); printf("raid%d: Failing the disk: row: %d col: %d\n", unit, rr->row, rr->col); /* * Make a copy of the recon request so that we don't * rely on the user's buffer */ RF_Malloc(rrcopy, sizeof(*rrcopy), (struct rf_recon_req *)); if (rrcopy == NULL) return(ENOMEM); bcopy(rr, rrcopy, sizeof(*rr)); rrcopy->raidPtr = (void *)raidPtr; retcode = RF_CREATE_THREAD(raidPtr->recon_thread, rf_ReconThread, rrcopy,"raid_recon"); return (0); /* * Invoke a copyback operation after recon on whatever * disk needs it, if any. */ case RAIDFRAME_COPYBACK: if (raidPtr->Layout.map->faultsTolerated == 0) { /* This makes no sense on a RAID 0!! */ return(EINVAL); } if (raidPtr->copyback_in_progress == 1) { /* Copyback is already in progress! */ return(EINVAL); } retcode = RF_CREATE_THREAD(raidPtr->copyback_thread, rf_CopybackThread, raidPtr,"raid_copyback"); return (retcode); /* Return the percentage completion of reconstruction */ case RAIDFRAME_CHECK_RECON_STATUS: if (raidPtr->Layout.map->faultsTolerated == 0) { /* This makes no sense on a RAID 0, so tell the user it's done. */ *(int *) data = 100; return(0); } row = 0; /* XXX we only consider a single row... */ if (raidPtr->status[row] != rf_rs_reconstructing) *(int *)data = 100; else *(int *)data = raidPtr->reconControl[row]->percentComplete; return (0); case RAIDFRAME_CHECK_RECON_STATUS_EXT: progressInfoPtr = (RF_ProgressInfo_t **) data; row = 0; /* XXX we only consider a single row... */ if (raidPtr->status[row] != rf_rs_reconstructing) { progressInfo.remaining = 0; progressInfo.completed = 100; progressInfo.total = 100; } else { progressInfo.total = raidPtr->reconControl[row]->numRUsTotal; progressInfo.completed = raidPtr->reconControl[row]->numRUsComplete; progressInfo.remaining = progressInfo.total - progressInfo.completed; } retcode = copyout((caddr_t) &progressInfo, (caddr_t) *progressInfoPtr, sizeof(RF_ProgressInfo_t)); return (retcode); case RAIDFRAME_CHECK_PARITYREWRITE_STATUS: if (raidPtr->Layout.map->faultsTolerated == 0) { /* This makes no sense on a RAID 0, so tell the user it's done. */ *(int *) data = 100; return(0); } if (raidPtr->parity_rewrite_in_progress == 1) { *(int *) data = 100 * raidPtr->parity_rewrite_stripes_done / raidPtr->Layout.numStripe; } else { *(int *) data = 100; } return (0); case RAIDFRAME_CHECK_PARITYREWRITE_STATUS_EXT: progressInfoPtr = (RF_ProgressInfo_t **) data; if (raidPtr->parity_rewrite_in_progress == 1) { progressInfo.total = raidPtr->Layout.numStripe; progressInfo.completed = raidPtr->parity_rewrite_stripes_done; progressInfo.remaining = progressInfo.total - progressInfo.completed; } else { progressInfo.remaining = 0; progressInfo.completed = 100; progressInfo.total = 100; } retcode = copyout((caddr_t) &progressInfo, (caddr_t) *progressInfoPtr, sizeof(RF_ProgressInfo_t)); return (retcode); case RAIDFRAME_CHECK_COPYBACK_STATUS: if (raidPtr->Layout.map->faultsTolerated == 0) { /* This makes no sense on a RAID 0 */ *(int *) data = 100; return(0); } if (raidPtr->copyback_in_progress == 1) { *(int *) data = 100 * raidPtr->copyback_stripes_done / raidPtr->Layout.numStripe; } else { *(int *) data = 100; } return (0); case RAIDFRAME_CHECK_COPYBACK_STATUS_EXT: progressInfoPtr = (RF_ProgressInfo_t **) data; if (raidPtr->copyback_in_progress == 1) { progressInfo.total = raidPtr->Layout.numStripe; progressInfo.completed = raidPtr->copyback_stripes_done; progressInfo.remaining = progressInfo.total - progressInfo.completed; } else { progressInfo.remaining = 0; progressInfo.completed = 100; progressInfo.total = 100; } retcode = copyout((caddr_t) &progressInfo, (caddr_t) *progressInfoPtr, sizeof(RF_ProgressInfo_t)); return (retcode); #if 0 case RAIDFRAME_SPARET_WAIT: /* * The sparetable daemon calls this to wait for the * kernel to need a spare table. * This ioctl does not return until a spare table is needed. * XXX -- Calling mpsleep here in the ioctl code is almost * certainly wrong and evil. -- XXX * XXX -- I should either compute the spare table in the * kernel, or have a different. -- XXX * XXX -- Interface (a different character device) for * delivering the table. -- XXX */ RF_LOCK_MUTEX(rf_sparet_wait_mutex); while (!rf_sparet_wait_queue) mpsleep(&rf_sparet_wait_queue, (PZERO + 1) | PCATCH, "sparet wait", 0, (void *)simple_lock_addr(rf_sparet_wait_mutex), MS_LOCK_SIMPLE); waitreq = rf_sparet_wait_queue; rf_sparet_wait_queue = rf_sparet_wait_queue->next; RF_UNLOCK_MUTEX(rf_sparet_wait_mutex); *((RF_SparetWait_t *)data) = *waitreq; RF_Free(waitreq, sizeof *waitreq); return (0); case RAIDFRAME_ABORT_SPARET_WAIT: /* * Wakes up a process waiting on SPARET_WAIT and puts an * error code in it that will cause the dameon to exit. */ RF_Malloc(waitreq, sizeof (*waitreq), (RF_SparetWait_t *)); waitreq->fcol = -1; RF_LOCK_MUTEX(rf_sparet_wait_mutex); waitreq->next = rf_sparet_wait_queue; rf_sparet_wait_queue = waitreq; RF_UNLOCK_MUTEX(rf_sparet_wait_mutex); wakeup(&rf_sparet_wait_queue); return (0); case RAIDFRAME_SEND_SPARET: /* * Used by the spare table daemon to deliver a spare table * into the kernel */ /* Install the spare table */ retcode = rf_SetSpareTable(raidPtr,*(void **)data); /* * Respond to the requestor. the return status of the * spare table installation is passed in the "fcol" field */ RF_Malloc(waitreq, sizeof *waitreq, (RF_SparetWait_t *)); waitreq->fcol = retcode; RF_LOCK_MUTEX(rf_sparet_wait_mutex); waitreq->next = rf_sparet_resp_queue; rf_sparet_resp_queue = waitreq; wakeup(&rf_sparet_resp_queue); RF_UNLOCK_MUTEX(rf_sparet_wait_mutex); return (retcode); #endif /* fall through to the os-specific code below */ default: break; } if (!raidPtr->valid) return (EINVAL); /* * Add support for "regular" device ioctls here. */ switch (cmd) { case DIOCGDINFO: *(struct disklabel *)data = *(rs->sc_dkdev.dk_label); break; case DIOCGPART: ((struct partinfo *)data)->disklab = rs->sc_dkdev.dk_label; ((struct partinfo *)data)->part = &rs->sc_dkdev.dk_label->d_partitions[DISKPART(dev)]; break; case DIOCWDINFO: case DIOCSDINFO: { struct disklabel *lp; lp = (struct disklabel *)data; if ((error = raidlock(rs)) != 0) return (error); rs->sc_flags |= RAIDF_LABELLING; error = setdisklabel(rs->sc_dkdev.dk_label, lp, 0, rs->sc_dkdev.dk_cpulabel); if (error == 0) { if (cmd == DIOCWDINFO) error = writedisklabel(RAIDLABELDEV(dev), raidstrategy, rs->sc_dkdev.dk_label, rs->sc_dkdev.dk_cpulabel); } rs->sc_flags &= ~RAIDF_LABELLING; raidunlock(rs); if (error) return (error); break; } case DIOCWLABEL: if (*(int *)data != 0) rs->sc_flags |= RAIDF_WLABEL; else rs->sc_flags &= ~RAIDF_WLABEL; break; case DIOCGPDINFO: raidgetdefaultlabel(raidPtr, rs, (struct disklabel *) data); break; default: retcode = ENOTTY; } return (retcode); } /* * raidinit -- complete the rest of the initialization for the * RAIDframe device. */ void raidinit(raidPtr) RF_Raid_t *raidPtr; { struct raid_softc *rs; struct cfdata *cf; int unit; unit = raidPtr->raidid; rs = &raid_softc[unit]; pool_init(&rs->sc_cbufpool, sizeof(struct raidbuf), 0, 0, 0, "raidpl", NULL); /* XXX should check return code first... */ rs->sc_flags |= RAIDF_INITED; /* XXX doesn't check bounds.*/ sprintf(rs->sc_xname, "raid%d", unit); rs->sc_dkdev.dk_name = rs->sc_xname; /* * disk_attach actually creates space for the CPU disklabel, among * other things, so it's critical to call this *BEFORE* we * try putzing with disklabels. */ disk_attach(&rs->sc_dkdev); /* * XXX There may be a weird interaction here between this, and * protectedSectors, as used in RAIDframe. */ rs->sc_size = raidPtr->totalSectors; /* * config_attach the raid device into the device tree. * For autoconf rootdev selection... */ cf = malloc(sizeof(struct cfdata), M_RAIDFRAME, M_NOWAIT); if (cf == NULL) { printf("WARNING: no memory for cfdata struct\n"); return; } bzero(cf, sizeof(struct cfdata)); cf->cf_attach = &raid_ca; cf->cf_driver = &raid_cd; cf->cf_unit = unit; config_attach(NULL, cf, NULL, NULL); printf("\n"); /* pretty up config_attach()'s output. */ } /* * Wake up the daemon & tell it to get us a spare table * XXX * The entries in the queues should be tagged with the raidPtr so that in the * extremely rare case that two recons happen at once, we know for * which device were requesting a spare table. * XXX * * XXX This code is not currently used. GO */ int rf_GetSpareTableFromDaemon(req) RF_SparetWait_t *req; { int retcode; RF_LOCK_MUTEX(rf_sparet_wait_mutex); req->next = rf_sparet_wait_queue; rf_sparet_wait_queue = req; wakeup(&rf_sparet_wait_queue); /* mpsleep unlocks the mutex */ while (!rf_sparet_resp_queue) { tsleep(&rf_sparet_resp_queue, PRIBIO, "raidframe getsparetable", 0); } req = rf_sparet_resp_queue; rf_sparet_resp_queue = req->next; RF_UNLOCK_MUTEX(rf_sparet_wait_mutex); retcode = req->fcol; /* this is not the same req as we alloc'd */ RF_Free(req, sizeof *req); return (retcode); } /* * A wrapper around rf_DoAccess that extracts appropriate info from the * bp & passes it down. * Any calls originating in the kernel must use non-blocking I/O * do some extra sanity checking to return "appropriate" error values for * certain conditions (to make some standard utilities work) * * Formerly known as: rf_DoAccessKernel */ void raidstart(raidPtr) RF_Raid_t *raidPtr; { RF_SectorCount_t num_blocks, pb, sum; RF_RaidAddr_t raid_addr; int retcode; struct partition *pp; daddr_t blocknum; int unit; struct raid_softc *rs; int do_async; struct buf *bp; unit = raidPtr->raidid; rs = &raid_softc[unit]; /* quick check to see if anything has died recently */ RF_LOCK_MUTEX(raidPtr->mutex); if (raidPtr->numNewFailures > 0) { rf_update_component_labels(raidPtr, RF_NORMAL_COMPONENT_UPDATE); raidPtr->numNewFailures--; } RF_UNLOCK_MUTEX(raidPtr->mutex); /* Check to see if we're at the limit... */ RF_LOCK_MUTEX(raidPtr->mutex); while (raidPtr->openings > 0) { RF_UNLOCK_MUTEX(raidPtr->mutex); bp = rs->sc_q.b_actf; if (bp == NULL) { /* nothing more to do */ return; } rs->sc_q.b_actf = bp->b_actf; /* Ok, for the bp we have here, bp->b_blkno is relative to the * partition.. Need to make it absolute to the underlying * device.. */ blocknum = bp->b_blkno; if (DISKPART(bp->b_dev) != RAW_PART) { pp = &rs->sc_dkdev.dk_label->d_partitions[DISKPART(bp->b_dev)]; blocknum += pp->p_offset; } db1_printf(("Blocks: %d, %d\n", (int) bp->b_blkno, (int) blocknum)); db1_printf(("bp->b_bcount = %d\n", (int) bp->b_bcount)); db1_printf(("bp->b_resid = %d\n", (int) bp->b_resid)); /* *THIS* is where we adjust what block we're going to... * but DO NOT TOUCH bp->b_blkno!!! */ raid_addr = blocknum; num_blocks = bp->b_bcount >> raidPtr->logBytesPerSector; pb = (bp->b_bcount & raidPtr->sectorMask) ? 1 : 0; sum = raid_addr + num_blocks + pb; if (1 || rf_debugKernelAccess) { db1_printf(("raid_addr=%d sum=%d num_blocks=%d(+%d) (%d)\n", (int) raid_addr, (int) sum, (int) num_blocks, (int) pb, (int) bp->b_resid)); } if ((sum > raidPtr->totalSectors) || (sum < raid_addr) || (sum < num_blocks) || (sum < pb)) { bp->b_error = ENOSPC; bp->b_flags |= B_ERROR; bp->b_resid = bp->b_bcount; /* db1_printf(("%s: Calling biodone on 0x%x\n", __func__, bp)); */ splassert(IPL_BIO); biodone(bp); RF_LOCK_MUTEX(raidPtr->mutex); continue; } /* * XXX rf_DoAccess() should do this, not just DoAccessKernel() */ if (bp->b_bcount & raidPtr->sectorMask) { bp->b_error = EINVAL; bp->b_flags |= B_ERROR; bp->b_resid = bp->b_bcount; /* db1_printf(("%s: Calling biodone on 0x%x\n", __func__, bp)); */ splassert(IPL_BIO); biodone(bp); RF_LOCK_MUTEX(raidPtr->mutex); continue; } db1_printf(("Calling DoAccess..\n")); RF_LOCK_MUTEX(raidPtr->mutex); raidPtr->openings--; RF_UNLOCK_MUTEX(raidPtr->mutex); /* * Everything is async. */ do_async = 1; disk_busy(&rs->sc_dkdev); /* XXX we're still at splbio() here... do we *really* * need to be? */ /* don't ever condition on bp->b_flags & B_WRITE. * always condition on B_READ instead */ retcode = rf_DoAccess(raidPtr, (bp->b_flags & B_READ) ? RF_IO_TYPE_READ : RF_IO_TYPE_WRITE, do_async, raid_addr, num_blocks, bp->b_data, bp, NULL, NULL, RF_DAG_NONBLOCKING_IO, NULL, NULL, NULL); RF_LOCK_MUTEX(raidPtr->mutex); } RF_UNLOCK_MUTEX(raidPtr->mutex); } /* Invoke an I/O from kernel mode. Disk queue should be locked upon entry */ int rf_DispatchKernelIO(queue, req) RF_DiskQueue_t *queue; RF_DiskQueueData_t *req; { int op = (req->type == RF_IO_TYPE_READ) ? B_READ : B_WRITE; struct buf *bp; struct raidbuf *raidbp = NULL; struct raid_softc *rs; int unit; int s; s=0; /* s = splbio();*/ /* want to test this */ /* * XXX along with the vnode, we also need the softc associated with * this device.. */ req->queue = queue; unit = queue->raidPtr->raidid; db1_printf(("DispatchKernelIO unit: %d\n", unit)); if (unit >= numraid) { printf("Invalid unit number: %d %d\n", unit, numraid); panic("Invalid Unit number in rf_DispatchKernelIO\n"); } rs = &raid_softc[unit]; bp = req->bp; #if 1 /* * XXX When there is a physical disk failure, someone is passing * us a buffer that contains old stuff!! Attempt to deal with * this problem without taking a performance hit... * (not sure where the real bug is. It's buried in RAIDframe * somewhere) :-( GO ) */ if (bp->b_flags & B_ERROR) { bp->b_flags &= ~B_ERROR; } if (bp->b_error!=0) { bp->b_error = 0; } #endif raidbp = RAIDGETBUF(rs); raidbp->rf_flags = 0; /* XXX not really used anywhere... */ /* * context for raidiodone */ raidbp->rf_obp = bp; raidbp->req = req; LIST_INIT(&raidbp->rf_buf.b_dep); switch (req->type) { case RF_IO_TYPE_NOP: /* Used primarily to unlock a locked queue. */ db1_printf(("rf_DispatchKernelIO: NOP to r %d c %d\n", queue->row, queue->col)); /* XXX need to do something extra here.. */ /* * I'm leaving this in, as I've never actually seen it * used, and I'd like folks to report it... GO */ printf(("WAKEUP CALLED\n")); queue->numOutstanding++; /* XXX need to glue the original buffer into this?? */ rf_KernelWakeupFunc(&raidbp->rf_buf); break; case RF_IO_TYPE_READ: case RF_IO_TYPE_WRITE: if (req->tracerec) { RF_ETIMER_START(req->tracerec->timer); } rf_InitBP(&raidbp->rf_buf, queue->rf_cinfo->ci_vp, op | bp->b_flags, queue->rf_cinfo->ci_dev, req->sectorOffset, req->numSector, req->buf, rf_KernelWakeupFunc, (void *)req, queue->raidPtr->logBytesPerSector, req->b_proc); if (rf_debugKernelAccess) { db1_printf(("dispatch: bp->b_blkno = %ld\n", (long)bp->b_blkno)); } queue->numOutstanding++; queue->last_deq_sector = req->sectorOffset; /* * Acc wouldn't have been let in if there were any * pending reqs at any other priority. */ queue->curPriority = req->priority; db1_printf(("Going for %c to unit %d row %d col %d\n", req->type, unit, queue->row, queue->col)); db1_printf(("sector %d count %d (%d bytes) %d\n", (int)req->sectorOffset, (int)req->numSector, (int)(req->numSector << queue->raidPtr->logBytesPerSector), (int)queue->raidPtr->logBytesPerSector)); if ((raidbp->rf_buf.b_flags & B_READ) == 0) { raidbp->rf_buf.b_vp->v_numoutput++; } VOP_STRATEGY(&raidbp->rf_buf); break; default: panic("bad req->type in rf_DispatchKernelIO"); } db1_printf(("Exiting from DispatchKernelIO\n")); /* splx(s); */ /* want to test this */ return (0); } /* * This is the callback function associated with a I/O invoked from * kernel code. */ void rf_KernelWakeupFunc(vbp) struct buf *vbp; { RF_DiskQueueData_t *req = NULL; RF_DiskQueue_t *queue; struct raidbuf *raidbp = (struct raidbuf *)vbp; struct buf *bp; struct raid_softc *rs; int unit; int s; s = splbio(); db1_printf(("recovering the request queue:\n")); req = raidbp->req; bp = raidbp->rf_obp; queue = (RF_DiskQueue_t *)req->queue; if (raidbp->rf_buf.b_flags & B_ERROR) { bp->b_flags |= B_ERROR; bp->b_error = raidbp->rf_buf.b_error ? raidbp->rf_buf.b_error : EIO; } #if 1 /* XXX Methinks this could be wrong... */ bp->b_resid = raidbp->rf_buf.b_resid; #endif if (req->tracerec) { RF_ETIMER_STOP(req->tracerec->timer); RF_ETIMER_EVAL(req->tracerec->timer); RF_LOCK_MUTEX(rf_tracing_mutex); req->tracerec->diskwait_us += RF_ETIMER_VAL_US(req->tracerec->timer); req->tracerec->phys_io_us += RF_ETIMER_VAL_US(req->tracerec->timer); req->tracerec->num_phys_ios++; RF_UNLOCK_MUTEX(rf_tracing_mutex); } bp->b_bcount = raidbp->rf_buf.b_bcount;/* XXXX ?? */ unit = queue->raidPtr->raidid; /* *Much* simpler :-> */ /* * XXX Ok, let's get aggressive... If B_ERROR is set, let's go * ballistic, and mark the component as hosed... */ if (bp->b_flags & B_ERROR) { /* Mark the disk as dead but only mark it once... */ if (queue->raidPtr->Disks[queue->row][queue->col].status == rf_ds_optimal) { printf("raid%d: IO Error. Marking %s as failed.\n", unit, queue->raidPtr-> Disks[queue->row][queue->col].devname); queue->raidPtr->Disks[queue->row][queue->col].status = rf_ds_failed; queue->raidPtr->status[queue->row] = rf_rs_degraded; queue->raidPtr->numFailures++; queue->raidPtr->numNewFailures++; } else { /* Disk is already dead... */ /* printf("Disk already marked as dead!\n"); */ } } rs = &raid_softc[unit]; RAIDPUTBUF(rs, raidbp); rf_DiskIOComplete(queue, req, (bp->b_flags & B_ERROR) ? 1 : 0); (req->CompleteFunc)(req->argument, (bp->b_flags & B_ERROR) ? 1 : 0); splx(s); } /* * Initialize a buf structure for doing an I/O in the kernel. */ void rf_InitBP(bp, b_vp, rw_flag, dev, startSect, numSect, buf, cbFunc, cbArg, logBytesPerSector, b_proc) struct buf *bp; struct vnode *b_vp; unsigned rw_flag; dev_t dev; RF_SectorNum_t startSect; RF_SectorCount_t numSect; caddr_t buf; void (*cbFunc)(struct buf *); void *cbArg; int logBytesPerSector; struct proc *b_proc; { /* bp->b_flags = B_PHYS | rw_flag; */ bp->b_flags = B_CALL | rw_flag; /* XXX need B_PHYS here too??? */ bp->b_bcount = numSect << logBytesPerSector; bp->b_bufsize = bp->b_bcount; bp->b_error = 0; bp->b_dev = dev; bp->b_data = buf; bp->b_blkno = startSect; bp->b_resid = bp->b_bcount; /* XXX is this right!??!?!! */ if (bp->b_bcount == 0) { panic("bp->b_bcount is zero in rf_InitBP!!\n"); } bp->b_proc = b_proc; bp->b_iodone = cbFunc; bp->b_vp = b_vp; LIST_INIT(&bp->b_dep); } void raidgetdefaultlabel(raidPtr, rs, lp) RF_Raid_t *raidPtr; struct raid_softc *rs; struct disklabel *lp; { db1_printf(("Building a default label...\n")); bzero(lp, sizeof(*lp)); /* fabricate a label... */ lp->d_secperunit = raidPtr->totalSectors; lp->d_secsize = raidPtr->bytesPerSector; lp->d_nsectors = raidPtr->Layout.dataSectorsPerStripe; lp->d_ntracks = 4 * raidPtr->numCol; lp->d_ncylinders = raidPtr->totalSectors / (lp->d_nsectors * lp->d_ntracks); lp->d_secpercyl = lp->d_ntracks * lp->d_nsectors; strncpy(lp->d_typename, "raid", sizeof(lp->d_typename)); lp->d_type = DTYPE_RAID; strncpy(lp->d_packname, "fictitious", sizeof(lp->d_packname)); lp->d_rpm = 3600; lp->d_interleave = 1; lp->d_flags = 0; lp->d_partitions[RAW_PART].p_offset = 0; lp->d_partitions[RAW_PART].p_size = raidPtr->totalSectors; lp->d_partitions[RAW_PART].p_fstype = FS_UNUSED; lp->d_npartitions = RAW_PART + 1; lp->d_magic = DISKMAGIC; lp->d_magic2 = DISKMAGIC; lp->d_checksum = dkcksum(rs->sc_dkdev.dk_label); } /* * Read the disklabel from the raid device. If one is not present, fake one * up. */ void raidgetdisklabel(dev) dev_t dev; { int unit = raidunit(dev); struct raid_softc *rs = &raid_softc[unit]; char *errstring; struct disklabel *lp = rs->sc_dkdev.dk_label; struct cpu_disklabel *clp = rs->sc_dkdev.dk_cpulabel; RF_Raid_t *raidPtr; int i; struct partition *pp; db1_printf(("Getting the disklabel...\n")); bzero(clp, sizeof(*clp)); raidPtr = raidPtrs[unit]; raidgetdefaultlabel(raidPtr, rs, lp); /* * Call the generic disklabel extraction routine. */ errstring = readdisklabel(RAIDLABELDEV(dev), raidstrategy, lp, rs->sc_dkdev.dk_cpulabel, 0); if (errstring) { printf("%s: %s\n", rs->sc_xname, errstring); return; /*raidmakedisklabel(rs); */ } /* * Sanity check whether the found disklabel is valid. * * This is necessary since total size of the raid device * may vary when an interleave is changed even though exactly * same componets are used, and old disklabel may used * if that is found. */ if (lp->d_secperunit != rs->sc_size) printf("WARNING: %s: " "total sector size in disklabel (%d) != " "the size of raid (%ld)\n", rs->sc_xname, lp->d_secperunit, (long) rs->sc_size); for (i = 0; i < lp->d_npartitions; i++) { pp = &lp->d_partitions[i]; if (pp->p_offset + pp->p_size > rs->sc_size) printf("WARNING: %s: end of partition `%c' " "exceeds the size of raid (%ld)\n", rs->sc_xname, 'a' + i, (long) rs->sc_size); } } /* * Take care of things one might want to take care of in the event * that a disklabel isn't present. */ void raidmakedisklabel(rs) struct raid_softc *rs; { struct disklabel *lp = rs->sc_dkdev.dk_label; db1_printf(("Making a label..\n")); /* * For historical reasons, if there's no disklabel present * the raw partition must be marked FS_BSDFFS. */ lp->d_partitions[RAW_PART].p_fstype = FS_BSDFFS; strncpy(lp->d_packname, "default label", sizeof(lp->d_packname)); lp->d_checksum = dkcksum(lp); } /* * Lookup the provided name in the filesystem. If the file exists, * is a valid block device, and isn't being used by anyone else, * set *vpp to the file's vnode. * You'll find the original of this in ccd.c */ int raidlookup(path, p, vpp) char *path; struct proc *p; struct vnode **vpp; /* result */ { struct nameidata nd; struct vnode *vp; struct vattr va; int error; NDINIT(&nd, LOOKUP, FOLLOW, UIO_SYSSPACE, path, p); if ((error = vn_open(&nd, FREAD|FWRITE, 0)) != 0) { #ifdef DEBUG printf("RAIDframe: vn_open returned %d\n", error); #endif return (error); } vp = nd.ni_vp; if (vp->v_usecount > 1) { VOP_UNLOCK(vp, 0, p); (void)vn_close(vp, FREAD|FWRITE, p->p_ucred, p); return (EBUSY); } if ((error = VOP_GETATTR(vp, &va, p->p_ucred, p)) != 0) { VOP_UNLOCK(vp, 0, p); (void)vn_close(vp, FREAD|FWRITE, p->p_ucred, p); return (error); } /* XXX: eventually we should handle VREG, too. */ if (va.va_type != VBLK) { VOP_UNLOCK(vp, 0, p); (void)vn_close(vp, FREAD|FWRITE, p->p_ucred, p); return (ENOTBLK); } VOP_UNLOCK(vp, 0, p); *vpp = vp; return (0); } /* * Wait interruptibly for an exclusive lock. * * XXX * Several drivers do this; it should be abstracted and made MP-safe. * (Hmm... where have we seen this warning before :-> GO ) */ int raidlock(rs) struct raid_softc *rs; { int error; while ((rs->sc_flags & RAIDF_LOCKED) != 0) { rs->sc_flags |= RAIDF_WANTED; if ((error = tsleep(rs, PRIBIO | PCATCH, "raidlck", 0)) != 0) return (error); } rs->sc_flags |= RAIDF_LOCKED; return (0); } /* * Unlock and wake up any waiters. */ void raidunlock(rs) struct raid_softc *rs; { rs->sc_flags &= ~RAIDF_LOCKED; if ((rs->sc_flags & RAIDF_WANTED) != 0) { rs->sc_flags &= ~RAIDF_WANTED; wakeup(rs); } } #define RF_COMPONENT_INFO_OFFSET 16384 /* bytes */ #define RF_COMPONENT_INFO_SIZE 1024 /* bytes */ int raidmarkclean(dev_t dev, struct vnode *b_vp, int mod_counter) { RF_ComponentLabel_t clabel; raidread_component_label(dev, b_vp, &clabel); clabel.mod_counter = mod_counter; clabel.clean = RF_RAID_CLEAN; raidwrite_component_label(dev, b_vp, &clabel); return(0); } int raidmarkdirty(dev_t dev, struct vnode *b_vp, int mod_counter) { RF_ComponentLabel_t clabel; raidread_component_label(dev, b_vp, &clabel); clabel.mod_counter = mod_counter; clabel.clean = RF_RAID_DIRTY; raidwrite_component_label(dev, b_vp, &clabel); return(0); } /* ARGSUSED */ int raidread_component_label(dev, b_vp, clabel) dev_t dev; struct vnode *b_vp; RF_ComponentLabel_t *clabel; { struct buf *bp; int error; /* XXX should probably ensure that we don't try to do this if someone has changed rf_protected_sectors. */ if (b_vp == NULL) { /* For whatever reason, this component is not valid. Don't try to read a component label from it. */ return(EINVAL); } /* get a block of the appropriate size... */ bp = geteblk((int)RF_COMPONENT_INFO_SIZE); bp->b_dev = dev; /* get our ducks in a row for the read */ bp->b_blkno = RF_COMPONENT_INFO_OFFSET / DEV_BSIZE; bp->b_bcount = RF_COMPONENT_INFO_SIZE; bp->b_flags |= B_READ; bp->b_resid = RF_COMPONENT_INFO_SIZE / DEV_BSIZE; (*bdevsw[major(bp->b_dev)].d_strategy)(bp); error = biowait(bp); if (!error) { memcpy(clabel, bp->b_data, sizeof(RF_ComponentLabel_t)); #if 0 rf_print_component_label( clabel ); #endif } else { #if 0 printf("Failed to read RAID component label!\n"); #endif } brelse(bp); return(error); } /* ARGSUSED */ int raidwrite_component_label(dev, b_vp, clabel) dev_t dev; struct vnode *b_vp; RF_ComponentLabel_t *clabel; { struct buf *bp; int error; /* get a block of the appropriate size... */ bp = geteblk((int)RF_COMPONENT_INFO_SIZE); bp->b_dev = dev; /* get our ducks in a row for the write */ bp->b_blkno = RF_COMPONENT_INFO_OFFSET / DEV_BSIZE; bp->b_bcount = RF_COMPONENT_INFO_SIZE; bp->b_flags |= B_WRITE; bp->b_resid = RF_COMPONENT_INFO_SIZE / DEV_BSIZE; memset(bp->b_data, 0, RF_COMPONENT_INFO_SIZE ); memcpy(bp->b_data, clabel, sizeof(RF_ComponentLabel_t)); (*bdevsw[major(bp->b_dev)].d_strategy)(bp); error = biowait(bp); brelse(bp); if (error) { #if 1 printf("Failed to write RAID component info!\n"); #endif } return(error); } void rf_markalldirty(raidPtr) RF_Raid_t *raidPtr; { RF_ComponentLabel_t clabel; int r,c; raidPtr->mod_counter++; for (r = 0; r < raidPtr->numRow; r++) { for (c = 0; c < raidPtr->numCol; c++) { /* we don't want to touch (at all) a disk that has failed */ if (!RF_DEAD_DISK(raidPtr->Disks[r][c].status)) { raidread_component_label( raidPtr->Disks[r][c].dev, raidPtr->raid_cinfo[r][c].ci_vp, &clabel); if (clabel.status == rf_ds_spared) { /* XXX do something special... but whatever you do, don't try to access it!! */ } else { #if 0 clabel.status = raidPtr->Disks[r][c].status; raidwrite_component_label( raidPtr->Disks[r][c].dev, raidPtr->raid_cinfo[r][c].ci_vp, &clabel); #endif raidmarkdirty( raidPtr->Disks[r][c].dev, raidPtr->raid_cinfo[r][c].ci_vp, raidPtr->mod_counter); } } } } /* printf("Component labels marked dirty.\n"); */ #if 0 for( c = 0; c < raidPtr->numSpare ; c++) { sparecol = raidPtr->numCol + c; if (raidPtr->Disks[r][sparecol].status == rf_ds_used_spare) { /* XXX this is where we get fancy and map this spare into it's correct spot in the array. */ /* we claim this disk is "optimal" if it's rf_ds_used_spare, as that means it should be directly substitutable for the disk it replaced. We note that too... */ for(i=0;inumRow;i++) { for(j=0;jnumCol;j++) { if ((raidPtr->Disks[i][j].spareRow == r) && (raidPtr->Disks[i][j].spareCol == sparecol)) { srow = r; scol = sparecol; break; } } } raidread_component_label( raidPtr->Disks[r][sparecol].dev, raidPtr->raid_cinfo[r][sparecol].ci_vp, &clabel); /* make sure status is noted */ clabel.version = RF_COMPONENT_LABEL_VERSION; clabel.mod_counter = raidPtr->mod_counter; clabel.serial_number = raidPtr->serial_number; clabel.row = srow; clabel.column = scol; clabel.num_rows = raidPtr->numRow; clabel.num_columns = raidPtr->numCol; clabel.clean = RF_RAID_DIRTY; /* changed in a bit*/ clabel.status = rf_ds_optimal; raidwrite_component_label( raidPtr->Disks[r][sparecol].dev, raidPtr->raid_cinfo[r][sparecol].ci_vp, &clabel); raidmarkclean( raidPtr->Disks[r][sparecol].dev, raidPtr->raid_cinfo[r][sparecol].ci_vp); } } #endif } void rf_update_component_labels(raidPtr, final) RF_Raid_t *raidPtr; int final; { RF_ComponentLabel_t clabel; int sparecol; int r,c; int i,j; int srow, scol; srow = -1; scol = -1; /* XXX should do extra checks to make sure things really are clean, rather than blindly setting the clean bit... */ raidPtr->mod_counter++; for (r = 0; r < raidPtr->numRow; r++) { for (c = 0; c < raidPtr->numCol; c++) { if (raidPtr->Disks[r][c].status == rf_ds_optimal) { raidread_component_label( raidPtr->Disks[r][c].dev, raidPtr->raid_cinfo[r][c].ci_vp, &clabel); /* make sure status is noted */ clabel.status = rf_ds_optimal; /* bump the counter */ clabel.mod_counter = raidPtr->mod_counter; raidwrite_component_label( raidPtr->Disks[r][c].dev, raidPtr->raid_cinfo[r][c].ci_vp, &clabel); if (final == RF_FINAL_COMPONENT_UPDATE) { if (raidPtr->parity_good == RF_RAID_CLEAN) { raidmarkclean( raidPtr->Disks[r][c].dev, raidPtr->raid_cinfo[r][c].ci_vp, raidPtr->mod_counter); } } } /* else we don't touch it.. */ } } for( c = 0; c < raidPtr->numSpare ; c++) { sparecol = raidPtr->numCol + c; if (raidPtr->Disks[0][sparecol].status == rf_ds_used_spare) { /* we claim this disk is "optimal" if it's rf_ds_used_spare, as that means it should be directly substitutable for the disk it replaced. We note that too... */ for(i=0;inumRow;i++) { for(j=0;jnumCol;j++) { if ((raidPtr->Disks[i][j].spareRow == 0) && (raidPtr->Disks[i][j].spareCol == sparecol)) { srow = i; scol = j; break; } } } /* XXX shouldn't *really* need this... */ raidread_component_label( raidPtr->Disks[0][sparecol].dev, raidPtr->raid_cinfo[0][sparecol].ci_vp, &clabel); /* make sure status is noted */ raid_init_component_label(raidPtr, &clabel); clabel.mod_counter = raidPtr->mod_counter; clabel.row = srow; clabel.column = scol; clabel.status = rf_ds_optimal; raidwrite_component_label( raidPtr->Disks[0][sparecol].dev, raidPtr->raid_cinfo[0][sparecol].ci_vp, &clabel); if (final == RF_FINAL_COMPONENT_UPDATE) { if (raidPtr->parity_good == RF_RAID_CLEAN) { raidmarkclean( raidPtr->Disks[0][sparecol].dev, raidPtr->raid_cinfo[0][sparecol].ci_vp, raidPtr->mod_counter); } } } } /* printf("Component labels updated\n"); */ } void rf_close_component(raidPtr, vp, auto_configured) RF_Raid_t *raidPtr; struct vnode *vp; int auto_configured; { struct proc *p; if ((p = raidPtr->engine_thread) == NULL) p = curproc; if (vp != NULL) { if (auto_configured == 1) { VOP_CLOSE(vp, FREAD | FWRITE, NOCRED, 0); vrele(vp); } else { VOP_UNLOCK(vp, 0, p); (void) vn_close(vp, FREAD | FWRITE, p->p_ucred, p); } } else { printf("vnode was NULL\n"); } } void rf_UnconfigureVnodes(raidPtr) RF_Raid_t *raidPtr; { int r,c; struct vnode *vp; int acd; /* We take this opportunity to close the vnodes like we should.. */ for (r = 0; r < raidPtr->numRow; r++) { for (c = 0; c < raidPtr->numCol; c++) { printf("Closing vnode for row: %d col: %d\n", r, c); vp = raidPtr->raid_cinfo[r][c].ci_vp; acd = raidPtr->Disks[r][c].auto_configured; rf_close_component(raidPtr, vp, acd); raidPtr->raid_cinfo[r][c].ci_vp = NULL; raidPtr->Disks[r][c].auto_configured = 0; } } for (r = 0; r < raidPtr->numSpare; r++) { printf("Closing vnode for spare: %d\n", r); vp = raidPtr->raid_cinfo[0][raidPtr->numCol + r].ci_vp; acd = raidPtr->Disks[0][raidPtr->numCol + r].auto_configured; rf_close_component(raidPtr, vp, acd); raidPtr->raid_cinfo[0][raidPtr->numCol + r].ci_vp = NULL; raidPtr->Disks[0][raidPtr->numCol + r].auto_configured = 0; } } void rf_ReconThread(req) struct rf_recon_req *req; { int s; RF_Raid_t *raidPtr; s = splbio(); raidPtr = (RF_Raid_t *) req->raidPtr; raidPtr->recon_in_progress = 1; rf_FailDisk((RF_Raid_t *) req->raidPtr, req->row, req->col, ((req->flags & RF_FDFLAGS_RECON) ? 1 : 0)); /* XXX get rid of this! we don't need it at all.. */ RF_Free(req, sizeof(*req)); raidPtr->recon_in_progress = 0; splx(s); /* That's all... */ kthread_exit(0); /* does not return */ } void rf_RewriteParityThread(raidPtr) RF_Raid_t *raidPtr; { int retcode; int s; s = splbio(); raidPtr->parity_rewrite_in_progress = 1; retcode = rf_RewriteParity(raidPtr); if (retcode) { printf("raid%d: Error re-writing parity!\n",raidPtr->raidid); } else { /* set the clean bit! If we shutdown correctly, the clean bit on each component label will get set */ raidPtr->parity_good = RF_RAID_CLEAN; } raidPtr->parity_rewrite_in_progress = 0; splx(s); /* Anyone waiting for us to stop? If so, inform them... */ if (raidPtr->waitShutdown) { wakeup(&raidPtr->parity_rewrite_in_progress); } /* That's all... */ kthread_exit(0); /* does not return */ } void rf_CopybackThread(raidPtr) RF_Raid_t *raidPtr; { int s; s = splbio(); raidPtr->copyback_in_progress = 1; rf_CopybackReconstructedData(raidPtr); raidPtr->copyback_in_progress = 0; splx(s); /* That's all... */ kthread_exit(0); /* does not return */ } void rf_ReconstructInPlaceThread(req) struct rf_recon_req *req; { int retcode; int s; RF_Raid_t *raidPtr; s = splbio(); raidPtr = req->raidPtr; raidPtr->recon_in_progress = 1; retcode = rf_ReconstructInPlace(raidPtr, req->row, req->col); RF_Free(req, sizeof(*req)); raidPtr->recon_in_progress = 0; splx(s); /* That's all... */ kthread_exit(0); /* does not return */ } RF_AutoConfig_t * rf_find_raid_components() { #ifdef RAID_AUTOCONFIG int major; struct vnode *vp; struct disklabel label; struct device *dv; dev_t dev; int error; int i; int good_one; RF_ComponentLabel_t *clabel; RF_AutoConfig_t *ac; #endif RF_AutoConfig_t *ac_list; /* initialize the AutoConfig list */ ac_list = NULL; #ifdef RAID_AUTOCONFIG /* we begin by trolling through *all* the devices on the system */ for (dv = alldevs.tqh_first; dv != NULL; dv = dv->dv_list.tqe_next) { /* we are only interested in disks... */ if (dv->dv_class != DV_DISK) continue; /* we don't care about floppies... */ if (!strcmp(dv->dv_cfdata->cf_driver->cd_name,"fd")) { continue; } /* need to find the device_name_to_block_device_major stuff */ major = findblkmajor(dv); /* get a vnode for the raw partition of this disk */ dev = MAKEDISKDEV(major, dv->dv_unit, RAW_PART); if (bdevvp(dev, &vp)) panic("RAID can't alloc vnode"); error = VOP_OPEN(vp, FREAD, NOCRED, 0); if (error) { /* "Who cares." Continue looking for something that exists*/ vput(vp); continue; } /* Ok, the disk exists. Go get the disklabel. */ error = VOP_IOCTL(vp, DIOCGDINFO, (caddr_t)&label, FREAD, NOCRED, 0); if (error) { /* * XXX can't happen - open() would * have errored out (or faked up one) */ printf("can't get label for dev %s%c (%d)!?!?\n", dv->dv_xname, 'a' + RAW_PART, error); } /* don't need this any more. We'll allocate it again a little later if we really do... */ VOP_CLOSE(vp, FREAD | FWRITE, NOCRED, 0); vrele(vp); for (i=0; i < label.d_npartitions; i++) { /* We only support partitions marked as RAID. */ /* Aside on sparc/sparc64 where FS_RAID doesn't */ /* fit in the SUN disklabel and we need to look */ /* into each and every partition !!! */ #if !defined(__sparc__) && !defined(__sparc64__) && !defined(__sun3__) if (label.d_partitions[i].p_fstype != FS_RAID) continue; #else /* !__sparc__ && !__sparc64__ && !__sun3__ */ if (label.d_partitions[i].p_fstype == FS_SWAP || label.d_partitions[i].p_fstype == FS_UNUSED) continue; #endif /* __sparc__ || __sparc64__ || __sun3__ */ dev = MAKEDISKDEV(major, dv->dv_unit, i); if (bdevvp(dev, &vp)) panic("RAID can't alloc vnode"); error = VOP_OPEN(vp, FREAD, NOCRED, 0); if (error) { /* Whatever... */ vput(vp); continue; } good_one = 0; clabel = (RF_ComponentLabel_t *) malloc(sizeof(RF_ComponentLabel_t), M_RAIDFRAME, M_NOWAIT); if (clabel == NULL) { /* XXX CLEANUP HERE */ printf("RAID auto config: out of memory!\n"); return(NULL); /* XXX probably should panic? */ } if (!raidread_component_label(dev, vp, clabel)) { /* Got the label. Does it look reasonable? */ if (rf_reasonable_label(clabel) && (clabel->partitionSize <= label.d_partitions[i].p_size)) { #ifdef DEBUG printf("Component on: %s%c: %d\n", dv->dv_xname, 'a'+i, label.d_partitions[i].p_size); rf_print_component_label(clabel); #endif /* if it's reasonable, add it, else ignore it. */ ac = (RF_AutoConfig_t *) malloc(sizeof(RF_AutoConfig_t), M_RAIDFRAME, M_NOWAIT); if (ac == NULL) { /* XXX should panic?? */ return(NULL); } sprintf(ac->devname, "%s%c", dv->dv_xname, 'a'+i); ac->dev = dev; ac->vp = vp; ac->clabel = clabel; ac->next = ac_list; ac_list = ac; good_one = 1; } } if (!good_one) { /* cleanup */ free(clabel, M_RAIDFRAME); VOP_CLOSE(vp, FREAD | FWRITE, NOCRED, 0); vrele(vp); } } } #endif return(ac_list); } #ifdef RAID_AUTOCONFIG int rf_reasonable_label(clabel) RF_ComponentLabel_t *clabel; { if (((clabel->version==RF_COMPONENT_LABEL_VERSION_1) || (clabel->version==RF_COMPONENT_LABEL_VERSION)) && ((clabel->clean == RF_RAID_CLEAN) || (clabel->clean == RF_RAID_DIRTY)) && clabel->row >=0 && clabel->column >= 0 && clabel->num_rows > 0 && clabel->num_columns > 0 && clabel->row < clabel->num_rows && clabel->column < clabel->num_columns && clabel->blockSize > 0 && clabel->numBlocks > 0) { /* label looks reasonable enough... */ return(1); } return(0); } #endif void rf_print_component_label(clabel) RF_ComponentLabel_t *clabel; { printf(" Row: %d Column: %d Num Rows: %d Num Columns: %d\n", clabel->row, clabel->column, clabel->num_rows, clabel->num_columns); printf(" Version: %d Serial Number: %d Mod Counter: %d\n", clabel->version, clabel->serial_number, clabel->mod_counter); printf(" Clean: %s Status: %d\n", clabel->clean ? "Yes" : "No", clabel->status ); printf(" sectPerSU: %d SUsPerPU: %d SUsPerRU: %d\n", clabel->sectPerSU, clabel->SUsPerPU, clabel->SUsPerRU); printf(" RAID Level: %c blocksize: %d numBlocks: %d\n", (char) clabel->parityConfig, clabel->blockSize, clabel->numBlocks); printf(" Autoconfig: %s\n", clabel->autoconfigure ? "Yes" : "No" ); printf(" Contains root partition: %s\n", clabel->root_partition ? "Yes" : "No" ); printf(" Last configured as: raid%d\n", clabel->last_unit ); #if 0 printf(" Config order: %d\n", clabel->config_order); #endif } RF_ConfigSet_t * rf_create_auto_sets(ac_list) RF_AutoConfig_t *ac_list; { RF_AutoConfig_t *ac; RF_ConfigSet_t *config_sets; RF_ConfigSet_t *cset; RF_AutoConfig_t *ac_next; config_sets = NULL; /* Go through the AutoConfig list, and figure out which components belong to what sets. */ ac = ac_list; while(ac!=NULL) { /* we're going to putz with ac->next, so save it here for use at the end of the loop */ ac_next = ac->next; if (config_sets == NULL) { /* will need at least this one... */ config_sets = (RF_ConfigSet_t *) malloc(sizeof(RF_ConfigSet_t), M_RAIDFRAME, M_NOWAIT); if (config_sets == NULL) { panic("rf_create_auto_sets: No memory!\n"); } /* this one is easy :) */ config_sets->ac = ac; config_sets->next = NULL; config_sets->rootable = 0; ac->next = NULL; } else { /* which set does this component fit into? */ cset = config_sets; while(cset!=NULL) { if (rf_does_it_fit(cset, ac)) { /* looks like it matches... */ ac->next = cset->ac; cset->ac = ac; break; } cset = cset->next; } if (cset==NULL) { /* didn't find a match above... new set..*/ cset = (RF_ConfigSet_t *) malloc(sizeof(RF_ConfigSet_t), M_RAIDFRAME, M_NOWAIT); if (cset == NULL) { panic("rf_create_auto_sets: No memory!\n"); } cset->ac = ac; ac->next = NULL; cset->next = config_sets; cset->rootable = 0; config_sets = cset; } } ac = ac_next; } return(config_sets); } int rf_does_it_fit(cset, ac) RF_ConfigSet_t *cset; RF_AutoConfig_t *ac; { RF_ComponentLabel_t *clabel1, *clabel2; /* If this one matches the *first* one in the set, that's good enough, since the other members of the set would have been through here too... */ /* note that we are not checking partitionSize here.. Note that we are also not checking the mod_counters here. If everything else matches execpt the mod_counter, that's good enough for this test. We will deal with the mod_counters a little later in the autoconfiguration process. (clabel1->mod_counter == clabel2->mod_counter) && The reason we don't check for this is that failed disks will have lower modification counts. If those disks are not added to the set they used to belong to, then they will form their own set, which may result in 2 different sets, for example, competing to be configured at raid0, and perhaps competing to be the root filesystem set. If the wrong ones get configured, or both attempt to become /, weird behaviour and or serious lossage will occur. Thus we need to bring them into the fold here, and kick them out at a later point. */ clabel1 = cset->ac->clabel; clabel2 = ac->clabel; if ((clabel1->version == clabel2->version) && (clabel1->serial_number == clabel2->serial_number) && (clabel1->num_rows == clabel2->num_rows) && (clabel1->num_columns == clabel2->num_columns) && (clabel1->sectPerSU == clabel2->sectPerSU) && (clabel1->SUsPerPU == clabel2->SUsPerPU) && (clabel1->SUsPerRU == clabel2->SUsPerRU) && (clabel1->parityConfig == clabel2->parityConfig) && (clabel1->maxOutstanding == clabel2->maxOutstanding) && (clabel1->blockSize == clabel2->blockSize) && (clabel1->numBlocks == clabel2->numBlocks) && (clabel1->autoconfigure == clabel2->autoconfigure) && (clabel1->root_partition == clabel2->root_partition) && (clabel1->last_unit == clabel2->last_unit) && (clabel1->config_order == clabel2->config_order)) { /* if it get's here, it almost *has* to be a match */ } else { /* it's not consistent with somebody in the set.. punt */ return(0); } /* all was fine.. it must fit... */ return(1); } int rf_have_enough_components(cset) RF_ConfigSet_t *cset; { RF_AutoConfig_t *ac; RF_AutoConfig_t *auto_config; RF_ComponentLabel_t *clabel; int r,c; int num_rows; int num_cols; int num_missing; int mod_counter; int mod_counter_found; int even_pair_failed; char parity_type; /* check to see that we have enough 'live' components of this set. If so, we can configure it if necessary */ num_rows = cset->ac->clabel->num_rows; num_cols = cset->ac->clabel->num_columns; parity_type = cset->ac->clabel->parityConfig; /* XXX Check for duplicate components!?!?!? */ /* Determine what the mod_counter is supposed to be for this set. */ mod_counter_found = 0; mod_counter = 0; ac = cset->ac; while(ac!=NULL) { if (mod_counter_found==0) { mod_counter = ac->clabel->mod_counter; mod_counter_found = 1; } else { if (ac->clabel->mod_counter > mod_counter) { mod_counter = ac->clabel->mod_counter; } } ac = ac->next; } num_missing = 0; auto_config = cset->ac; for(r=0; rclabel->row == r) && (ac->clabel->column == c) && (ac->clabel->mod_counter == mod_counter)) { /* it's this one... */ #ifdef DEBUG printf("Found: %s at %d,%d\n", ac->devname,r,c); #endif break; } ac=ac->next; } if (ac==NULL) { /* Didn't find one here! */ /* special case for RAID 1, especially where there are more than 2 components (where RAIDframe treats things a little differently :( ) */ if (parity_type == '1') { if (c%2 == 0) { /* even component */ even_pair_failed = 1; } else { /* odd component. If we're failed, and so is the even component, it's "Good Night, Charlie" */ if (even_pair_failed == 1) { return(0); } } } else { /* normal accounting */ num_missing++; } } if ((parity_type == '1') && (c%2 == 1)) { /* Just did an even component, and we didn't bail.. reset the even_pair_failed flag, and go on to the next component.... */ even_pair_failed = 0; } } } clabel = cset->ac->clabel; if (((clabel->parityConfig == '0') && (num_missing > 0)) || ((clabel->parityConfig == '4') && (num_missing > 1)) || ((clabel->parityConfig == '5') && (num_missing > 1))) { /* XXX this needs to be made *much* more general */ /* Too many failures */ return(0); } /* otherwise, all is well, and we've got enough to take a kick at autoconfiguring this set */ return(1); } void rf_create_configuration(ac,config,raidPtr) RF_AutoConfig_t *ac; RF_Config_t *config; RF_Raid_t *raidPtr; { RF_ComponentLabel_t *clabel; int i; clabel = ac->clabel; /* 1. Fill in the common stuff */ config->numRow = clabel->num_rows; config->numCol = clabel->num_columns; config->numSpare = 0; /* XXX should this be set here? */ config->sectPerSU = clabel->sectPerSU; config->SUsPerPU = clabel->SUsPerPU; config->SUsPerRU = clabel->SUsPerRU; config->parityConfig = clabel->parityConfig; /* XXX... */ strcpy(config->diskQueueType,"fifo"); config->maxOutstandingDiskReqs = clabel->maxOutstanding; config->layoutSpecificSize = 0; /* XXX ?? */ while(ac!=NULL) { /* row/col values will be in range due to the checks in reasonable_label() */ strcpy(config->devnames[ac->clabel->row][ac->clabel->column], ac->devname); ac = ac->next; } for(i=0;idebugVars[i][0] = NULL; } #ifdef RAID_DEBUG_ALL #ifdef RF_DBG_OPTION #undef RF_DBG_OPTION #endif #ifdef __STDC__ #define RF_DBG_OPTION(_option_,_val_) \ snprintf(&(config->debugVars[i++][0]), 50, \ "%s %ld", #_option_, _val_); #else /* __STDC__ */ #define RF_DBG_OPTION(_option_,_val_) \ snprintf(&(config->debugVars[i++][0]), 50, \ "%s %ld", "/**/_option_/**/", _val_); #endif /* __STDC__ */ i = 0; /* RF_DBG_OPTION(accessDebug, 0) */ /* RF_DBG_OPTION(accessTraceBufSize, 0) */ RF_DBG_OPTION(cscanDebug, 1) /* debug CSCAN sorting */ RF_DBG_OPTION(dagDebug, 1) /* RF_DBG_OPTION(debugPrintUseBuffer, 0) */ RF_DBG_OPTION(degDagDebug, 1) RF_DBG_OPTION(disableAsyncAccs, 1) RF_DBG_OPTION(diskDebug, 1) RF_DBG_OPTION(enableAtomicRMW, 0) /* this debug var enables * locking of the disk arm * during small-write * operations. Setting this * variable to anything other * than 0 will result in * deadlock. (wvcii) */ RF_DBG_OPTION(engineDebug, 1) RF_DBG_OPTION(fifoDebug, 1) /* debug fifo queueing */ /* RF_DBG_OPTION(floatingRbufDebug, 1) */ /* RF_DBG_OPTION(forceHeadSepLimit, -1) */ /* RF_DBG_OPTION(forceNumFloatingReconBufs, -1) */ /* wire down number of * extra recon buffers * to use */ /* RF_DBG_OPTION(keepAccTotals, 1) */ /* turn on keep_acc_totals */ RF_DBG_OPTION(lockTableSize, RF_DEFAULT_LOCK_TABLE_SIZE) RF_DBG_OPTION(mapDebug, 1) RF_DBG_OPTION(maxNumTraces, -1) /* RF_DBG_OPTION(memChunkDebug, 1) */ /* RF_DBG_OPTION(memDebug, 1) */ /* RF_DBG_OPTION(memDebugAddress, 1) */ /* RF_DBG_OPTION(numBufsToAccumulate, 1) */ /* number of buffers to * accumulate before * doing XOR */ RF_DBG_OPTION(prReconSched, 0) RF_DBG_OPTION(printDAGsDebug, 1) RF_DBG_OPTION(printStatesDebug, 1) RF_DBG_OPTION(protectedSectors, 64L) /* # of sectors at start * of disk to exclude * from RAID address * space */ RF_DBG_OPTION(pssDebug, 1) RF_DBG_OPTION(queueDebug, 1) RF_DBG_OPTION(quiesceDebug, 1) RF_DBG_OPTION(raidSectorOffset, 0) /* added to all incoming sectors * to debug alignment problems */ RF_DBG_OPTION(reconDebug, 1) RF_DBG_OPTION(reconbufferDebug, 1) RF_DBG_OPTION(scanDebug, 1) /* debug SCAN sorting */ RF_DBG_OPTION(showXorCallCounts, 0) /* show n-way Xor call counts */ RF_DBG_OPTION(shutdownDebug, 1) /* show shutdown calls */ RF_DBG_OPTION(sizePercentage, 100) RF_DBG_OPTION(sstfDebug, 1) /* turn on debugging info for sstf * queueing */ RF_DBG_OPTION(stripeLockDebug, 1) RF_DBG_OPTION(suppressLocksAndLargeWrites, 0) RF_DBG_OPTION(suppressTraceDelays, 0) RF_DBG_OPTION(useMemChunks, 1) RF_DBG_OPTION(validateDAGDebug, 1) RF_DBG_OPTION(validateVisitedDebug, 1) /* XXX turn to zero by * default? */ RF_DBG_OPTION(verifyParityDebug, 1) RF_DBG_OPTION(debugKernelAccess, 1) /* DoAccessKernel debugging */ #if 0 /* RF_INCLUDE_PARITYLOGGING > 0 */ RF_DBG_OPTION(forceParityLogReint, 0) RF_DBG_OPTION(numParityRegions, 0) /* number of regions in the * array */ RF_DBG_OPTION(numReintegrationThreads, 1) RF_DBG_OPTION(parityLogDebug, 1) /* if nonzero, enables debugging * of parity logging */ RF_DBG_OPTION(totalInCoreLogCapacity, 1024 * 1024) /* target bytes * available for * in-core * logs */ #endif /* RF_INCLUDE_PARITYLOGGING > 0 */ #endif /* RAID_DEBUG_ALL */ } int rf_set_autoconfig(raidPtr, new_value) RF_Raid_t *raidPtr; int new_value; { RF_ComponentLabel_t clabel; struct vnode *vp; dev_t dev; int row, column; raidPtr->autoconfigure = new_value; for(row=0; rownumRow; row++) { for(column=0; columnnumCol; column++) { if (raidPtr->Disks[row][column].status == rf_ds_optimal) { dev = raidPtr->Disks[row][column].dev; vp = raidPtr->raid_cinfo[row][column].ci_vp; raidread_component_label(dev, vp, &clabel); clabel.autoconfigure = new_value; raidwrite_component_label(dev, vp, &clabel); } } } return(new_value); } int rf_set_rootpartition(raidPtr, new_value) RF_Raid_t *raidPtr; int new_value; { RF_ComponentLabel_t clabel; struct vnode *vp; dev_t dev; int row, column; raidPtr->root_partition = new_value; for(row=0; rownumRow; row++) { for(column=0; columnnumCol; column++) { if (raidPtr->Disks[row][column].status == rf_ds_optimal) { dev = raidPtr->Disks[row][column].dev; vp = raidPtr->raid_cinfo[row][column].ci_vp; raidread_component_label(dev, vp, &clabel); clabel.root_partition = new_value; raidwrite_component_label(dev, vp, &clabel); } } } return(new_value); } void rf_release_all_vps(cset) RF_ConfigSet_t *cset; { RF_AutoConfig_t *ac; ac = cset->ac; while(ac!=NULL) { /* Close the vp, and give it back */ if (ac->vp) { VOP_CLOSE(ac->vp, FREAD, NOCRED, 0); vrele(ac->vp); ac->vp = NULL; } ac = ac->next; } } void rf_cleanup_config_set(cset) RF_ConfigSet_t *cset; { RF_AutoConfig_t *ac; RF_AutoConfig_t *next_ac; ac = cset->ac; while(ac!=NULL) { next_ac = ac->next; /* nuke the label */ free(ac->clabel, M_RAIDFRAME); /* cleanup the config structure */ free(ac, M_RAIDFRAME); /* "next.." */ ac = next_ac; } /* and, finally, nuke the config set */ free(cset, M_RAIDFRAME); } void raid_init_component_label(raidPtr, clabel) RF_Raid_t *raidPtr; RF_ComponentLabel_t *clabel; { /* current version number */ clabel->version = RF_COMPONENT_LABEL_VERSION; clabel->serial_number = raidPtr->serial_number; clabel->mod_counter = raidPtr->mod_counter; clabel->num_rows = raidPtr->numRow; clabel->num_columns = raidPtr->numCol; clabel->clean = RF_RAID_DIRTY; /* not clean */ clabel->status = rf_ds_optimal; /* "It's good!" */ clabel->sectPerSU = raidPtr->Layout.sectorsPerStripeUnit; clabel->SUsPerPU = raidPtr->Layout.SUsPerPU; clabel->SUsPerRU = raidPtr->Layout.SUsPerRU; clabel->blockSize = raidPtr->bytesPerSector; clabel->numBlocks = raidPtr->sectorsPerDisk; /* XXX not portable */ clabel->parityConfig = raidPtr->Layout.map->parityConfig; clabel->maxOutstanding = raidPtr->maxOutstanding; clabel->autoconfigure = raidPtr->autoconfigure; clabel->root_partition = raidPtr->root_partition; clabel->last_unit = raidPtr->raidid; clabel->config_order = raidPtr->config_order; } int rf_auto_config_set(cset,unit) RF_ConfigSet_t *cset; int *unit; { RF_Raid_t *raidPtr; RF_Config_t *config; int raidID; int retcode; printf("RAID autoconfigure\n"); retcode = 0; *unit = -1; /* 1. Create a config structure */ config = (RF_Config_t *)malloc(sizeof(RF_Config_t), M_RAIDFRAME, M_NOWAIT); if (config==NULL) { printf("Out of mem!?!?\n"); /* XXX do something more intelligent here. */ return(1); } memset(config, 0, sizeof(RF_Config_t)); /* XXX raidID needs to be set correctly.. */ /* 2. Figure out what RAID ID this one is supposed to live at See if we can get the same RAID dev that it was configured on last time.. */ raidID = cset->ac->clabel->last_unit; if ((raidID < 0) || (raidID >= numraid)) { /* let's not wander off into lala land. */ raidID = numraid - 1; } if (raidPtrs[raidID]->valid != 0) { /* Nope... Go looking for an alternative... Start high so we don't immediately use raid0 if that's not taken. */ for(raidID = numraid - 1; raidID >= 0; raidID--) { if (raidPtrs[raidID]->valid == 0) { /* can use this one! */ break; } } } if (raidID < 0) { /* punt... */ printf("Unable to auto configure this set!\n"); printf("(Out of RAID devs!)\n"); return(1); } printf("Configuring raid%d:\n",raidID); raidPtr = raidPtrs[raidID]; /* XXX all this stuff should be done SOMEWHERE ELSE! */ raidPtr->raidid = raidID; raidPtr->openings = RAIDOUTSTANDING; /* 3. Build the configuration structure */ rf_create_configuration(cset->ac, config, raidPtr); /* 4. Do the configuration */ retcode = rf_Configure(raidPtr, config, cset->ac); if (retcode == 0) { raidinit(raidPtrs[raidID]); rf_markalldirty(raidPtrs[raidID]); raidPtrs[raidID]->autoconfigure = 1; /* XXX do this here? */ if (cset->ac->clabel->root_partition==1) { /* everything configured just fine. Make a note that this set is eligible to be root. */ cset->rootable = 1; /* XXX do this here? */ raidPtrs[raidID]->root_partition = 1; } } /* 5. Cleanup */ free(config, M_RAIDFRAME); *unit = raidID; return(retcode); } void rf_disk_unbusy(desc) RF_RaidAccessDesc_t *desc; { struct buf *bp; bp = (struct buf *)desc->bp; disk_unbusy(&raid_softc[desc->raidPtr->raidid].sc_dkdev, (bp->b_bcount - bp->b_resid)); }