/* $OpenBSD: qereg.h,v 1.2 2003/06/02 18:32:41 jason Exp $ */ /* $NetBSD: qereg.h,v 1.3 2000/07/24 04:28:51 mycroft Exp $ */ /*- * Copyright (c) 1999 The NetBSD Foundation, Inc. * All rights reserved. * * This code is derived from software contributed to The NetBSD Foundation * by Paul Kranenburg. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the NetBSD * Foundation, Inc. and its contributors. * 4. Neither the name of The NetBSD Foundation nor the names of its * contributors may be used to endorse or promote products derived * from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. */ /* * Copyright (c) 1998 Jason L. Wright. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHORS ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ /* * QE Channel registers */ #if 0 struct qe_cregs { u_int32_t ctrl; /* control */ u_int32_t stat; /* status */ u_int32_t rxds; /* rx descriptor ring ptr */ u_int32_t txds; /* tx descriptor ring ptr */ u_int32_t rimask; /* rx interrupt mask */ u_int32_t timask; /* tx interrupt mask */ u_int32_t qmask; /* qec error interrupt mask */ u_int32_t mmask; /* mace error interrupt mask */ u_int32_t rxwbufptr; /* local memory rx write ptr */ u_int32_t rxrbufptr; /* local memory rx read ptr */ u_int32_t txwbufptr; /* local memory tx write ptr */ u_int32_t txrbufptr; /* local memory tx read ptr */ u_int32_t ccnt; /* collision counter */ u_int32_t pipg; /* inter-frame gap */ }; #endif /* register indices: */ #define QE_CRI_CTRL (0*4) #define QE_CRI_STAT (1*4) #define QE_CRI_RXDS (2*4) #define QE_CRI_TXDS (3*4) #define QE_CRI_RIMASK (4*4) #define QE_CRI_TIMASK (5*4) #define QE_CRI_QMASK (6*4) #define QE_CRI_MMASK (7*4) #define QE_CRI_RXWBUF (8*4) #define QE_CRI_RXRBUF (9*4) #define QE_CRI_TXWBUF (10*4) #define QE_CRI_TXRBUF (11*4) #define QE_CRI_CCNT (12*4) #define QE_CRI_PIPG (13*4) /* qe_cregs.ctrl: control. */ #define QE_CR_CTRL_RXOFF 0x00000004 /* disable receiver */ #define QE_CR_CTRL_RESET 0x00000002 /* reset this channel */ #define QE_CR_CTRL_TWAKEUP 0x00000001 /* tx dma wakeup */ /* qe_cregs.stat: status. */ #define QE_CR_STAT_EDEFER 0x10000000 /* excessive defers */ #define QE_CR_STAT_CLOSS 0x08000000 /* loss of carrier */ #define QE_CR_STAT_ERETRIES 0x04000000 /* >16 retries */ #define QE_CR_STAT_LCOLL 0x02000000 /* late tx collision */ #define QE_CR_STAT_FUFLOW 0x01000000 /* fifo underflow */ #define QE_CR_STAT_JERROR 0x00800000 /* jabber error */ #define QE_CR_STAT_BERROR 0x00400000 /* babble error */ #define QE_CR_STAT_TXIRQ 0x00200000 /* tx interrupt */ #define QE_CR_STAT_TCCOFLOW 0x00100000 /* tx collision cntr expired */ #define QE_CR_STAT_TXDERROR 0x00080000 /* tx descriptor is bad */ #define QE_CR_STAT_TXLERR 0x00040000 /* tx late error */ #define QE_CR_STAT_TXPERR 0x00020000 /* tx parity error */ #define QE_CR_STAT_TXSERR 0x00010000 /* tx sbus error ack */ #define QE_CR_STAT_RCCOFLOW 0x00001000 /* rx collision cntr expired */ #define QE_CR_STAT_RUOFLOW 0x00000800 /* rx runt counter expired */ #define QE_CR_STAT_MCOFLOW 0x00000400 /* rx missed counter expired */ #define QE_CR_STAT_RXFOFLOW 0x00000200 /* rx fifo over flow */ #define QE_CR_STAT_RLCOLL 0x00000100 /* rx late collision */ #define QE_CR_STAT_FCOFLOW 0x00000080 /* rx frame counter expired */ #define QE_CR_STAT_CECOFLOW 0x00000040 /* rx crc error cntr expired */ #define QE_CR_STAT_RXIRQ 0x00000020 /* rx interrupt */ #define QE_CR_STAT_RXDROP 0x00000010 /* rx dropped packet */ #define QE_CR_STAT_RXSMALL 0x00000008 /* rx buffer too small */ #define QE_CR_STAT_RXLERR 0x00000004 /* rx late error */ #define QE_CR_STAT_RXPERR 0x00000002 /* rx parity error */ #define QE_CR_STAT_RXSERR 0x00000001 /* rx sbus error ack */ #define QE_CR_STAT_BITS "\177\020" \ "b\0RXSERR\0b\1RXPERR\0b\2RXLERR\0" \ "b\3RXSMALL\0b\4RXDROP\0b\5RXIRQ\0" \ "b\6CECOFLOW\0b\7FCOFLOW\0b\10RLCOLL\0" \ "b\11RXFOFLOW\0b\12MCOFLOW\0b\13RUOFLOW\0" \ "b\14RCCOFLOW\0b\20TXSERR\0b\21TXPERR\0" \ "b\22TXLERR\0b\23TXDERROR\0b\24TCCOFLOW\0" \ "b\25TXIRQ\0b\26BERROR\0b\27JERROR\0" \ "b\30FUFLOW\0b\31LCOLL\0b\32ERETRIES\0" \ "b\33CLOSS\0b\32EDEFER\0\0" /* * Errors: all status bits except for TX/RX IRQ */ #define QE_CR_STAT_ALLERRORS \ ( QE_CR_STAT_EDEFER | QE_CR_STAT_CLOSS | QE_CR_STAT_ERETRIES \ | QE_CR_STAT_LCOLL | QE_CR_STAT_FUFLOW | QE_CR_STAT_JERROR \ | QE_CR_STAT_BERROR | QE_CR_STAT_TCCOFLOW | QE_CR_STAT_TXDERROR \ | QE_CR_STAT_TXLERR | QE_CR_STAT_TXPERR | QE_CR_STAT_TXSERR \ | QE_CR_STAT_RCCOFLOW | QE_CR_STAT_RUOFLOW | QE_CR_STAT_MCOFLOW \ | QE_CR_STAT_RXFOFLOW | QE_CR_STAT_RLCOLL | QE_CR_STAT_FCOFLOW \ | QE_CR_STAT_CECOFLOW | QE_CR_STAT_RXDROP | QE_CR_STAT_RXSMALL \ | QE_CR_STAT_RXLERR | QE_CR_STAT_RXPERR | QE_CR_STAT_RXSERR) /* qe_cregs.qmask: qec error interrupt mask. */ #define QE_CR_QMASK_COFLOW 0x00100000 /* collision cntr overflow */ #define QE_CR_QMASK_TXDERROR 0x00080000 /* tx descriptor error */ #define QE_CR_QMASK_TXLERR 0x00040000 /* tx late error */ #define QE_CR_QMASK_TXPERR 0x00020000 /* tx parity error */ #define QE_CR_QMASK_TXSERR 0x00010000 /* tx sbus error ack */ #define QE_CR_QMASK_RXDROP 0x00000010 /* rx packet dropped */ #define QE_CR_QMASK_RXSMALL 0x00000008 /* rx buffer too small */ #define QE_CR_QMASK_RXLERR 0x00000004 /* rx late error */ #define QE_CR_QMASK_RXPERR 0x00000002 /* rx parity error */ #define QE_CR_QMASK_RXSERR 0x00000001 /* rx sbus error ack */ /* qe_cregs.mmask: MACE error interrupt mask. */ #define QE_CR_MMASK_EDEFER 0x10000000 /* excess defer */ #define QE_CR_MMASK_CLOSS 0x08000000 /* carrier loss */ #define QE_CR_MMASK_ERETRY 0x04000000 /* excess retry */ #define QE_CR_MMASK_LCOLL 0x02000000 /* late collision error */ #define QE_CR_MMASK_UFLOW 0x01000000 /* underflow */ #define QE_CR_MMASK_JABBER 0x00800000 /* jabber error */ #define QE_CR_MMASK_BABBLE 0x00400000 /* babble error */ #define QE_CR_MMASK_OFLOW 0x00000800 /* overflow */ #define QE_CR_MMASK_RXCOLL 0x00000400 /* rx coll-cntr overflow */ #define QE_CR_MMASK_RPKT 0x00000200 /* runt pkt overflow */ #define QE_CR_MMASK_MPKT 0x00000100 /* missed pkt overflow */ /* qe_cregs.pipg: inter-frame gap. */ #define QE_CR_PIPG_TENAB 0x00000020 /* enable throttle */ #define QE_CR_PIPG_MMODE 0x00000010 /* manual mode */ #define QE_CR_PIPG_WMASK 0x0000000f /* sbus wait mask */ /* * MACE registers */ #if 0 struct qe_mregs { u_int8_t rcvfifo; [0] /* receive fifo */ u_int8_t xmtfifo; [1] /* transmit fifo */ u_int8_t xmtfc; [2] /* transmit frame control */ u_int8_t xmtfs; [3] /* transmit frame status */ u_int8_t xmtrc; [4] /* tx retry count */ u_int8_t rcvfc; [5] /* receive frame control */ u_int8_t rcvfs; [6] /* receive frame status */ u_int8_t fifofc; [7] /* fifo frame count */ u_int8_t ir; [8] /* interrupt register */ u_int8_t imr; [9] /* interrupt mask register */ u_int8_t pr; [10] /* poll register */ u_int8_t biucc; [11] /* biu config control */ u_int8_t fifocc; [12] /* fifo config control */ u_int8_t maccc; [13] /* mac config control */ u_int8_t plscc; [14] /* pls config control */ u_int8_t phycc; [15] /* phy config control */ u_int8_t chipid1; [16] /* chipid, low byte */ u_int8_t chipid2; [17] /* chipid, high byte */ u_int8_t iac; [18] /* internal address config */ u_int8_t _reserved0; [19] /* reserved */ u_int8_t ladrf; [20] /* logical address filter */ u_int8_t padr; [21] /* physical address */ u_int8_t _reserved1; [22] /* reserved */ u_int8_t _reserved2; [23] /* reserved */ u_int8_t mpc; [24] /* missed packet count */ u_int8_t _reserved3; [25] /* reserved */ u_int8_t rntpc; [26] /* runt packet count */ u_int8_t rcvcc; [27] /* receive collision count */ u_int8_t _reserved4; [28] /* reserved */ u_int8_t utr; [29] /* user test register */ u_int8_t rtr1; [30] /* reserved test register 1 */ u_int8_t rtr2; [31] /* reserved test register 2 */ }; #endif /* register indices: */ #define QE_MRI_RCVFIFO 0 /* receive fifo */ #define QE_MRI_XMTFIFO 1 /* transmit fifo */ #define QE_MRI_XMTFC 2 /* transmit frame control */ #define QE_MRI_XMTFS 3 /* transmit frame status */ #define QE_MRI_XMTRC 4 /* tx retry count */ #define QE_MRI_RCVFC 5 /* receive frame control */ #define QE_MRI_RCVFS 6 /* receive frame status */ #define QE_MRI_FIFOFC 7 /* fifo frame count */ #define QE_MRI_IR 8 /* interrupt register */ #define QE_MRI_IMR 9 /* interrupt mask register */ #define QE_MRI_PR 10 /* poll register */ #define QE_MRI_BIUCC 11 /* biu config control */ #define QE_MRI_FIFOCC 12 /* fifo config control */ #define QE_MRI_MACCC 13 /* mac config control */ #define QE_MRI_PLSCC 14 /* pls config control */ #define QE_MRI_PHYCC 15 /* phy config control */ #define QE_MRI_CHIPID1 16 /* chipid, low byte */ #define QE_MRI_CHIPID2 17 /* chipid, high byte */ #define QE_MRI_IAC 18 /* internal address config */ #define QE_MRI_LADRF 20 /* logical address filter */ #define QE_MRI_PADR 21 /* physical address */ #define QE_MRI_MPC 24 /* missed packet count */ #define QE_MRI_RNTPC 26 /* runt packet count */ #define QE_MRI_RCVCC 27 /* receive collision count */ #define QE_MRI_UTR 29 /* user test register */ #define QE_MRI_RTR1 30 /* reserved test register 1 */ #define QE_MRI_RTR2 31 /* reserved test register 2 */ /* qe_mregs.xmtfc: transmit frame control. */ #define QE_MR_XMTFC_DRETRY 0x80 /* disable retries */ #define QE_MR_XMTFC_DXMTFCS 0x08 /* disable tx fcs */ #define QE_MR_XMTFC_APADXMT 0x01 /* enable auto padding */ /* qe_mregs.xmtfs: transmit frame status. */ #define QE_MR_XMTFS_XMTSV 0x80 /* tx valid */ #define QE_MR_XMTFS_UFLO 0x40 /* tx underflow */ #define QE_MR_XMTFS_LCOL 0x20 /* tx late collision */ #define QE_MR_XMTFS_MORE 0x10 /* tx > 1 retries */ #define QE_MR_XMTFS_ONE 0x08 /* tx 1 retry */ #define QE_MR_XMTFS_DEFER 0x04 /* tx pkt deferred */ #define QE_MR_XMTFS_LCAR 0x02 /* tx carrier lost */ #define QE_MR_XMTFS_RTRY 0x01 /* tx retry error */ /* qe_mregs.xmtrc: transmit retry count. */ #define QE_MR_XMTRC_EXDEF 0x80 /* tx excess defers */ #define QE_MR_XMTRC_XMTRC 0x0f /* tx retry count mask */ /* qe_mregs.rcvfc: receive frame control. */ #define QE_MR_RCVFC_LLRCV 0x08 /* rx low latency */ #define QE_MR_RCVFC_MR 0x04 /* rx addr match/reject */ #define QE_MR_RCVFC_ASTRPRCV 0x01 /* rx auto strip */ /* qe_mregs.rcvfs: receive frame status. */ #define QE_MR_RCVFS_OFLO 0x80 /* rx overflow */ #define QE_MR_RCVFS_CLSN 0x40 /* rx late collision */ #define QE_MR_RCVFS_FRAM 0x20 /* rx framing error */ #define QE_MR_RCVFS_FCS 0x10 /* rx fcs error */ #define QE_MR_RCVFS_RCVCNT 0x0f /* rx msg byte count mask */ /* qe_mregs.fifofc: fifo frame count. */ #define QE_MR_FIFOFC_RCVFC 0xf0 /* rx fifo frame count */ #define QE_MR_FIFOFC_XMTFC 0x0f /* tx fifo frame count */ /* qe_mregs.ir: interrupt register. */ #define QE_MR_IR_JAB 0x80 /* jabber error */ #define QE_MR_IR_BABL 0x40 /* babble error */ #define QE_MR_IR_CERR 0x20 /* collision error */ #define QE_MR_IR_RCVCCO 0x10 /* collision cnt overflow */ #define QE_MR_IR_RNTPCO 0x08 /* runt pkt cnt overflow */ #define QE_MR_IR_MPCO 0x04 /* miss pkt cnt overflow */ #define QE_MR_IR_RCVINT 0x02 /* packet received */ #define QE_MR_IR_XMTINT 0x01 /* packet transmitted */ /* qe_mregs.imr: interrupt mask register. */ #define QE_MR_IMR_JABM 0x80 /* jabber errors */ #define QE_MR_IMR_BABLM 0x40 /* babble errors */ #define QE_MR_IMR_CERRM 0x20 /* collision errors */ #define QE_MR_IMR_RCVCCOM 0x10 /* rx collision count oflow */ #define QE_MR_IMR_RNTPCOM 0x08 /* runt pkt cnt ovrflw */ #define QE_MR_IMR_MPCOM 0x04 /* miss pkt cnt ovrflw */ #define QE_MR_IMR_RCVINTM 0x02 /* rx interrupts */ #define QE_MR_IMR_XMTINTM 0x01 /* tx interrupts */ /* qe_mregs.pr: poll register. */ #define QE_MR_PR_XMTSV 0x80 /* tx status is valid */ #define QE_MR_PR_TDTREQ 0x40 /* tx data xfer request */ #define QE_MR_PR_RDTREQ 0x20 /* rx data xfer request */ /* qe_mregs.biucc: biu config control. */ #define QE_MR_BIUCC_BSWAP 0x40 /* byte swap */ #define QE_MR_BIUCC_4TS 0x00 /* 4byte xmit start point */ #define QE_MR_BIUCC_16TS 0x10 /* 16byte xmit start point */ #define QE_MR_BIUCC_64TS 0x20 /* 64byte xmit start point */ #define QE_MR_BIUCC_112TS 0x30 /* 112byte xmit start point */ #define QE_MR_BIUCC_SWRST 0x01 /* sw-reset mace */ /* qe_mregs.fifocc: fifo config control. */ #define QE_MR_FIFOCC_TXF8 0x00 /* tx fifo 8 write cycles */ #define QE_MR_FIFOCC_TXF32 0x80 /* tx fifo 32 write cycles */ #define QE_MR_FIFOCC_TXF16 0x40 /* tx fifo 16 write cycles */ #define QE_MR_FIFOCC_RXF64 0x20 /* rx fifo 64 write cycles */ #define QE_MR_FIFOCC_RXF32 0x10 /* rx fifo 32 write cycles */ #define QE_MR_FIFOCC_RXF16 0x00 /* rx fifo 16 write cycles */ #define QE_MR_FIFOCC_TFWU 0x08 /* tx fifo watermark update */ #define QE_MR_FIFOCC_RFWU 0x04 /* rx fifo watermark update */ #define QE_MR_FIFOCC_XMTBRST 0x02 /* tx burst enable */ #define QE_MR_FIFOCC_RCVBRST 0x01 /* rx burst enable */ /* qe_mregs.maccc: mac config control. */ #define QE_MR_MACCC_PROM 0x80 /* promiscuous mode enable */ #define QE_MR_MACCC_DXMT2PD 0x40 /* tx 2part deferral enable */ #define QE_MR_MACCC_EMBA 0x20 /* modified backoff enable */ #define QE_MR_MACCC_DRCVPA 0x08 /* rx physical addr disable */ #define QE_MR_MACCC_DRCVBC 0x04 /* rx broadcast disable */ #define QE_MR_MACCC_ENXMT 0x02 /* enable transmitter */ #define QE_MR_MACCC_ENRCV 0x01 /* enable receiver */ /* qe_mregs.plscc: pls config control. */ #define QE_MR_PLSCC_XMTSEL 0x08 /* tx mode select */ #define QE_MR_PLSCC_PORTMASK 0x06 /* port selection bits */ #define QE_MR_PLSCC_GPSI 0x06 /* use gpsi connector */ #define QE_MR_PLSCC_DAI 0x04 /* use dai connector */ #define QE_MR_PLSCC_TP 0x02 /* use twistedpair connector */ #define QE_MR_PLSCC_AUI 0x00 /* use aui connector */ #define QE_MR_PLSCC_ENPLSIO 0x01 /* pls i/o enable */ /* qe_mregs.phycc: phy config control. */ #define QE_MR_PHYCC_LNKFL 0x80 /* link fail */ #define QE_MR_PHYCC_DLNKTST 0x40 /* disable link test logic */ #define QE_MR_PHYCC_REVPOL 0x20 /* rx polarity */ #define QE_MR_PHYCC_DAPC 0x10 /* autopolaritycorrect disab */ #define QE_MR_PHYCC_LRT 0x08 /* select low threshold */ #define QE_MR_PHYCC_ASEL 0x04 /* connector port auto-sel */ #define QE_MR_PHYCC_RWAKE 0x02 /* remote wakeup */ #define QE_MR_PHYCC_AWAKE 0x01 /* auto wakeup */ /* qe_mregs.iac: internal address config. */ #define QE_MR_IAC_ADDRCHG 0x80 /* start address change */ #define QE_MR_IAC_PHYADDR 0x04 /* physical address reset */ #define QE_MR_IAC_LOGADDR 0x02 /* logical address reset */ /* qe_mregs.utr: user test register. */ #define QE_MR_UTR_RTRE 0x80 /* enable resv test register */ #define QE_MR_UTR_RTRD 0x40 /* disab resv test register */ #define QE_MR_UTR_RPA 0x20 /* accept runt packets */ #define QE_MR_UTR_FCOLL 0x10 /* force collision status */ #define QE_MR_UTR_RCVSFCSE 0x08 /* enable fcs on rx */ #define QE_MR_UTR_INTLOOPM 0x06 /* Internal loopback w/mandec */ #define QE_MR_UTR_INTLOOP 0x04 /* Internal loopback */ #define QE_MR_UTR_EXTLOOP 0x02 /* external loopback */ #define QE_MR_UTR_NOLOOP 0x00 /* no loopback */ /* Buffer and Ring sizes: fixed ring size */ #define QE_TX_RING_MAXSIZE 256 /* maximum tx ring size */ #define QE_RX_RING_MAXSIZE 256 /* maximum rx ring size */ #define QE_TX_RING_SIZE 16 #define QE_RX_RING_SIZE 16 #define QE_PKT_BUF_SZ 2048 #define MC_POLY_LE 0xedb88320 /* mcast crc, little endian */