/* $OpenBSD: spifreg.h,v 1.4 2003/02/11 19:20:28 mickey Exp $ */ /* * Copyright (c) 1999-2002 Jason L. Wright (jason@thought.net) * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by Jason L. Wright * 4. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. * * Effort sponsored in part by the Defense Advanced Research Projects * Agency (DARPA) and Air Force Research Laboratory, Air Force * Materiel Command, USAF, under agreement number F30602-01-2-0537. * */ #define PPC_IN_PDATA 0x000 /* input data */ #define PPC_IN_PSTAT 0x001 /* input status */ #define PPC_IN_CTRL 0x002 /* input control */ #define PPC_IN_PWEIRD 0x003 /* input weird */ #define PPC_OUT_PDATA 0x000 /* output data */ #define PPC_OUT_PSTAT 0x001 /* output status */ #define PPC_OUT_PCTRL 0x002 /* output control */ #define PPC_OUT_PWEIRD 0x003 /* output weird */ #define PPC_IACK_PDATA 0x1fc /* iack data */ #define PPC_IACK_PSTAT 0x1fd /* iack status */ #define PPC_IACK_PCTRL 0x1fe /* iack control */ #define PPC_IACK_PWEIRD 0x1ff /* iack weird */ /* Parallel Status: read only */ #define PPC_PSTAT_ERROR 0x08 /* error */ #define PPC_PSTAT_SELECT 0x10 /* select */ #define PPC_PSTAT_PAPER 0x20 /* paper out */ #define PPC_PSTAT_ACK 0x40 /* ack */ #define PPC_PSTAT_BUSY 0x80 /* busy */ /* Parallel Control: read/write */ #define PPC_CTRL_STROBE 0x01 /* strobe, 1=drop strobe */ #define PPC_CTRL_AFX 0x02 /* auto form-feed */ #define PPC_CTRL_INIT 0x04 /* init, 1=enable printer */ #define PPC_CTRL_SLCT 0x08 /* SLC, 1=select printer */ #define PPC_CTRL_IRQE 0x10 /* IRQ, 1=enable intrs */ #define PPC_CTRL_OUTPUT 0x20 /* direction: 1=ppc out */ /* * The 'stc' is a Cirrus Logic CL-CD180 (either revision B or revision C) */ #define STC_CCR 0x01 /* channel command */ #define STC_SRER 0x02 /* service request enable */ #define STC_COR1 0x03 /* channel option 1 */ #define STC_COR2 0x04 /* channel option 2 */ #define STC_COR3 0x05 /* channel option 3 */ #define STC_CCSR 0x06 /* channel control status */ #define STC_RDCR 0x07 /* rx data count */ #define STC_SCHR1 0x09 /* special character 1 */ #define STC_SCHR2 0x0a /* special character 2 */ #define STC_SCHR3 0x0b /* special character 3 */ #define STC_SCHR4 0x0c /* special character 4 */ #define STC_MCOR1 0x10 /* modem change option 1 */ #define STC_MCOR2 0x11 /* modem change option 2 */ #define STC_MCR 0x12 /* modem change */ #define STC_RTPR 0x18 /* rx timeout period */ #define STC_MSVR 0x28 /* modem signal value */ #define STC_MSVRTS 0x29 /* modem signal value rts */ #define STC_MSVDTR 0x2a /* modem signal value dtr */ #define STC_RBPRH 0x31 /* rx bit rate period high */ #define STC_RBPRL 0x32 /* rx bit rate period low */ #define STC_RBR 0x33 /* rx bit */ #define STC_TBPRH 0x39 /* tx bit rate period high */ #define STC_TBPRL 0x3a /* tx bit rate period low */ #define STC_GSVR 0x40 /* global service vector */ #define STC_GSCR1 0x41 /* global service channel 1 */ #define STC_GSCR2 0x42 /* global service channel 2 */ #define STC_GSCR3 0x43 /* global service channel 3 */ #define STC_MSMR 0x61 /* modem service match */ #define STC_TSMR 0x62 /* tx service match */ #define STC_RSMR 0x63 /* rx service match */ #define STC_CAR 0x64 /* channel access */ #define STC_SRSR 0x65 /* service request status */ #define STC_SRCR 0x66 /* service request config */ #define STC_GFRCR 0x6b /* global firmware rev code */ #define STC_PPRH 0x70 /* prescalar period high */ #define STC_PPRL 0x71 /* prescalar period low */ #define STC_MRAR 0x75 /* modem request ack */ #define STC_TRAR 0x76 /* tx request ack */ #define STC_RRAR 0x77 /* rx request ack */ #define STC_RDR 0x78 /* rx data */ #define STC_RCSR 0x7a /* rx character status */ #define STC_TDR 0x7b /* tx data */ #define STC_EOSRR 0x7f /* end of service */ #define STC_REGMAPSIZE 0x80 /* Global Firmware Revision Code Register (rw) */ #define CD180_GFRCR_REV_B 0x81 /* CL-CD180B */ #define CD180_GFRCR_REV_C 0x82 /* CL-CD180C */ /* Service Request Configuration Register (rw) (CD180C or higher) */ #define CD180_SRCR_PKGTYP 0x80 /* pkg type,0=PLCC,1=PQFP */ #define CD180_SRCR_REGACKEN 0x40 /* register ack enable */ #define CD180_SRCR_DAISYEN 0x20 /* daisy chain enable */ #define CD180_SRCR_GLOBPRI 0x10 /* global priority */ #define CD180_SRCR_UNFAIR 0x08 /* use unfair interrupts */ #define CD180_SRCR_AUTOPRI 0x02 /* automatic priority */ #define CD180_SRCR_PRISEL 0x01 /* select rx/tx as high pri */ /* Prescalar Period Register High (rw) */ #define CD180_PPRH 0xf0 /* high byte */ #define CD180_PPRL 0x00 /* low byte */ /* Global Service Vector Register (rw) */ /* Modem Request Acknowledgement Register (ro) (and IACK equivalent) */ /* Receive Request Acknowledgement Register (ro) (and IACK equivalent) */ /* Transmit Request Acknowledgement Register (ro) (and IACK equivalent) */ #define CD180_GSVR_USERMASK 0xf8 /* user defined bits */ #define CD180_GSVR_IMASK 0x07 /* interrupt type mask */ #define CD180_GSVR_NOREQUEST 0x00 /* no request pending */ #define CD180_GSVR_STATCHG 0x01 /* modem signal change */ #define CD180_GSVR_TXDATA 0x02 /* tx service request */ #define CD180_GSVR_RXGOOD 0x03 /* rx service request */ #define CD180_GSVR_reserved1 0x04 /* reserved */ #define CD180_GSVR_reserved2 0x05 /* reserved */ #define CD180_GSVR_reserved3 0x06 /* reserved */ #define CD180_GSVR_RXEXCEPTION 0x07 /* rx exception request */ /* Service Request Status Register (ro) (CD180C and higher) */ #define CD180_SRSR_MREQINT 0x01 /* modem request internal */ #define CD180_SRSR_MREQEXT 0x02 /* modem request external */ #define CD180_SRSR_TREQINT 0x04 /* tx request internal */ #define CD180_SRSR_TREQEXT 0x08 /* tx request external */ #define CD180_SRSR_RREQINT 0x10 /* rx request internal */ #define CD180_SRSR_RREQEXT 0x20 /* rx request external */ #define CD180_SRSR_ILV_MASK 0xc0 /* internal service context */ #define CD180_SRSR_ILV_NONE 0x00 /* not in service context */ #define CD180_SRSR_ILV_RX 0xc0 /* in rx service context */ #define CD180_SRSR_ILV_TX 0x80 /* in tx service context */ #define CD180_SRSR_ILV_MODEM 0x40 /* in modem service context */ /* Global Service Channel Register 1,2,3 (rw) */ #define CD180_GSCR_CHANNEL(gscr) (((gscr) >> 2) & 7) /* Receive Data Count Register (ro) */ #define CD180_RDCR_MASK 0x0f /* mask for fifo length */ /* Receive Character Status Register (ro) */ #define CD180_RCSR_TO 0x80 /* time out */ #define CD180_RCSR_SCD2 0x40 /* special char detect 2 */ #define CD180_RCSR_SCD1 0x20 /* special char detect 1 */ #define CD180_RCSR_SCD0 0x10 /* special char detect 0 */ #define CD180_RCSR_BE 0x08 /* break exception */ #define CD180_RCSR_PE 0x04 /* parity exception */ #define CD180_RCSR_FE 0x02 /* framing exception */ #define CD180_RCSR_OE 0x01 /* overrun exception */ /* Service Request Enable Register (rw) */ #define CD180_SRER_DSR 0x80 /* DSR service request */ #define CD180_SRER_CD 0x40 /* CD service request */ #define CD180_SRER_CTS 0x20 /* CTS service request */ #define CD180_SRER_RXD 0x10 /* RXD service request */ #define CD180_SRER_RXSCD 0x08 /* RX special char request */ #define CD180_SRER_TXD 0x04 /* TX ready service request */ #define CD180_SRER_TXE 0x02 /* TX empty service request */ #define CD180_SRER_NNDT 0x01 /* No new data timeout req */ /* Channel Command Register (rw) */ /* Reset Channel Command */ #define CD180_CCR_CMD_RESET 0x80 /* chip/channel reset */ #define CD180_CCR_RESETALL 0x01 /* global reset */ #define CD180_CCR_RESETCHAN 0x00 /* current channel reset */ /* Channel Option Register Command */ #define CD180_CCR_CMD_COR 0x40 /* channel opt reg changed */ #define CD180_CCR_CORCHG1 0x02 /* cor1 has changed */ #define CD180_CCR_CORCHG2 0x04 /* cor2 has changed */ #define CD180_CCR_CORCHG3 0x08 /* cor3 has changed */ /* Send Special Character Command */ #define CD180_CCR_CMD_SPC 0x20 /* send special chars changed */ #define CD180_CCR_SSPC0 0x01 /* send special char 0 change */ #define CD180_CCR_SSPC1 0x02 /* send special char 1 change */ #define CD180_CCR_SSPC2 0x04 /* send special char 2 change */ /* Channel Control Command */ #define CD180_CCR_CMD_CHAN 0x10 /* channel control command */ #define CD180_CCR_CHAN_TXEN 0x08 /* enable channel tx */ #define CD180_CCR_CHAN_TXDIS 0x04 /* disable channel tx */ #define CD180_CCR_CHAN_RXEN 0x02 /* enable channel rx */ #define CD180_CCR_CHAN_RXDIS 0x01 /* disable channel rx */ /* Channel Option Register 1 (rw) */ #define CD180_COR1_EVENPAR 0x00 /* even parity */ #define CD180_COR1_ODDPAR 0x80 /* odd parity */ #define CD180_COR1_PARMODE_NO 0x00 /* no parity */ #define CD180_COR1_PARMODE_FORCE 0x20 /* force (odd=1, even=0) */ #define CD180_COR1_PARMODE_NORMAL 0x40 /* normal parity mode */ #define CD180_COR1_PARMODE_NA 0x60 /* notused */ #define CD180_COR1_IGNPAR 0x10 /* ignore parity */ #define CD180_COR1_STOP1 0x00 /* 1 stop bit */ #define CD180_COR1_STOP15 0x04 /* 1.5 stop bits */ #define CD180_COR1_STOP2 0x08 /* 2 stop bits */ #define CD180_COR1_STOP25 0x0c /* 2.5 stop bits */ #define CD180_COR1_CS5 0x00 /* 5 bit characters */ #define CD180_COR1_CS6 0x01 /* 6 bit characters */ #define CD180_COR1_CS7 0x02 /* 7 bit characters */ #define CD180_COR1_CS8 0x03 /* 8 bit characters */ /* Channel Option Register 2 (rw) */ #define CD180_COR2_IXM 0x80 /* implied xon mode */ #define CD180_COR2_TXIBE 0x40 /* tx in-band flow control */ #define CD180_COR2_ETC 0x20 /* embedded tx command enbl */ #define CD180_COR2_LLM 0x10 /* local loopback mode */ #define CD180_COR2_RLM 0x08 /* remote loopback mode */ #define CD180_COR2_RTSAO 0x04 /* RTS automatic output enbl */ #define CD180_COR2_CTSAE 0x02 /* CTS automatic enable */ #define CD180_COR2_DSRAE 0x01 /* DSR automatic enable */ /* Channel Option Register 3 (rw) */ #define CD180_COR3_XON2 0x80 /* XON char in spc1&3 */ #define CD180_COR3_XON1 0x00 /* XON char in spc1 */ #define CD180_COR3_XOFF2 0x40 /* XOFF char in spc2&4 */ #define CD180_COR3_XOFF1 0x00 /* XOFF char in spc2 */ #define CD180_COR3_FCT 0x20 /* flow control transparency */ #define CD180_COR3_SCDE 0x10 /* special char recognition */ #define CD180_COR3_RXFIFO_MASK 0x0f /* rx fifo threshold */ /* Channel Control Status Register (ro) */ #define CD180_CCSR_RXEN 0x80 /* rx is enabled */ #define CD180_CCSR_RXFLOFF 0x40 /* rx flow-off */ #define CD180_CCSR_RXFLON 0x20 /* rx flow-on */ #define CD180_CCSR_TXEN 0x08 /* tx is enabled */ #define CD180_CCSR_TXFLOFF 0x04 /* tx flow-off */ #define CD180_CCSR_TXFLON 0x02 /* tx flow-on */ /* Receiver Bit Register (ro) */ #define CD180_RBR_RXD 0x40 /* state of RxD pin */ #define CD180_RBR_STARTHUNT 0x20 /* looking for start bit */ /* Modem Change Register (rw) */ #define CD180_MCR_DSR 0x80 /* DSR changed */ #define CD180_MCR_CD 0x40 /* CD changed */ #define CD180_MCR_CTS 0x20 /* CTS changed */ /* Modem Change Option Register 1 (rw) */ #define CD180_MCOR1_DSRZD 0x80 /* catch 0->1 DSR changes */ #define CD180_MCOR1_CDZD 0x40 /* catch 0->1 CD changes */ #define CD180_MCOR1_CTSZD 0x40 /* catch 0->1 CTS changes */ #define CD180_MCOR1_DTRTHRESH 0x0f /* DTR threshold mask */ /* Modem Change Option Register 2 (rw) */ #define CD180_MCOR2_DSROD 0x80 /* catch 1->0 DSR changes */ #define CD180_MCOR2_CDOD 0x40 /* catch 1->0 CD changes */ #define CD180_MCOR2_CTSOD 0x20 /* catch 1->0 CTS changes */ /* Modem Signal Value Register (rw) */ #define CD180_MSVR_DSR 0x80 /* DSR input state */ #define CD180_MSVR_CD 0x40 /* CD input state */ #define CD180_MSVR_CTS 0x20 /* CTS input state */ #define CD180_MSVR_DTR 0x02 /* DTR output state */ #define CD180_MSVR_RTS 0x01 /* RTS output state */ /* Modem Signal Value Register - Request To Send (w) (CD180C and higher) */ #define CD180_MSVRTS_RTS 0x01 /* RTS signal value */ /* Modem Signal Value Register - Data Terminal Ready (w) (CD180C and higher) */ #define CD180_MSVDTR_DTR 0x02 /* DTR signal value */ /* * The register map for the SUNW,spif looks something like: * Offset: Function: * 0000 - 03ff Boot ROM * 0400 - 0407 dtr latches (one per port) * 0409 - 07ff unused * 0800 - 087f CD180 registers (normal mapping) * 0880 - 0bff unused * 0c00 - 0c7f CD180 registers (*iack mapping) * 0c80 - 0dff unused * 0e00 - 1fff PPC registers * * One note about the DTR latches: The values stored there are reversed. * By writing a 1 to the latch, DTR is lowered, and by writing a 0, DTR * is raised. The latches cannot be read, and no other value can be written * there or the system will crash due to "excessive bus loading (see * SBus loading and capacitance spec)" * * The *iack registers are read/written with the IACK bit set. When * the interrupt routine starts, it reads the MRAR, TRAR, and RRAR registers * from this mapping. This signals an interrupt acknowledgement cycle. * (NOTE: these are not really the MRAR, TRAR, and RRAR... They are copies * of the GSVR, I just mapped them to the same location as the mrar, trar, * and rrar because it seemed appropriate). */ #define DTR_REG_OFFSET 0x400 /* DTR latches */ #define DTR_REG_LEN 0x8 #define STC_REG_OFFSET 0x800 /* normal cd180 access */ #define STC_REG_LEN 0x80 #define ISTC_REG_OFFSET 0xc00 /* IACK cd180 access */ #define ISTC_REG_LEN STC_REG_LEN #define PPC_REG_OFFSET 0xe00 /* PPC registers */ #define PPC_REG_LEN 0x200 /* * The mapping of minor device number -> card and port is done as * follows by default: * * +---+---+---+---+---+---+---+---+ * | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 | * +---+---+---+---+---+---+---+---+ * | | | | | | | | * | | | | | +---+---+---> port number * | | | | | * | | | | +---------------> unused * | | | | * | | | +-------------------> dialout (on tty ports) * | | | * | | +-----------------------> unused * | | * +---+---------------------------> card number * */ #define SPIF_MAX_CARDS 4 #define SPIF_MAX_TTY 8 #define SPIF_MAX_BPP 1 /* * device selectors */ #define SPIF_CARD(x) ((minor(x) >> 6) & 0x03) #define SPIF_PORT(x) (minor(x) & 0x07) #define STTY_DIALOUT(x) (minor(x) & 0x10) #define STTY_RX_FIFO_THRESHOLD 4 #define STTY_RX_DTR_THRESHOLD 7 #define CD180_TX_FIFO_SIZE 8 /* 8 chars of fifo */ /* * These are the offsets of the MRAR, TRAR, and RRAR in *IACK space. * The high bit must be set as per specs for the MSMR, TSMR, and RSMR. */ #define SPIF_MSMR (0x80 | STC_MRAR) /* offset of MRAR | 0x80 */ #define SPIF_TSMR (0x80 | STC_TRAR) /* offset of TRAR | 0x80 */ #define SPIF_RSMR (0x80 | STC_RRAR) /* offset of RRAR | 0x80 */ /* * "verosc" node tells which oscillator we have. */ #define SPIF_OSC9 1 /* 9.8304 MHz */ #define SPIF_OSC10 2 /* 10MHz */ /* * There are two interrupts, serial gets interrupt[0], and parallel * gets interrupt[1] */ #define SERIAL_INTR 0 #define PARALLEL_INTR 1 /* * spif tty flags */ #define STTYF_CDCHG 0x01 /* carrier changed */ #define STTYF_RING_OVERFLOW 0x02 /* ring buffer overflowed */ #define STTYF_DONE 0x04 /* done... flush buffers */ #define STTYF_SET_BREAK 0x08 /* set break signal */ #define STTYF_CLR_BREAK 0x10 /* clear break signal */ #define STTYF_STOP 0x20 /* stopped */ #define STTY_RBUF_SIZE (2 * 512)