/* $OpenBSD: stp4020reg.h,v 1.2 2002/06/21 07:49:31 fgsch Exp $ */ /* $NetBSD: stp4020reg.h,v 1.1 1998/11/22 22:14:35 pk Exp $ */ /*- * Copyright (c) 1998 The NetBSD Foundation, Inc. * All rights reserved. * * This code is derived from software contributed to The NetBSD Foundation * by Paul Kranenburg. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the NetBSD * Foundation, Inc. and its contributors. * 4. Neither the name of The NetBSD Foundation nor the names of its * contributors may be used to endorse or promote products derived * from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. */ #ifndef _STP4020_REG_H #define _STP4020_REG_H /* * STP4020: SBus/PCMCIA bridge supporting two Type-3 PCMCIA cards. * Programming information source: * - http://www.sun.com/microelectronics/datasheets/stp4020/ * - SunOS 5.5 header file */ /* * General chip attibutes. */ #define STP4020_NSOCK 2 /* number of PCCARD sockets per STP4020 */ #define STP4020_NWIN 3 /* number of windows per socket */ /* * Socket control registers. * * Each PCMCIA socket has two interface control registers and two interface * status registers associated with it. */ /* * Socket Interface Control register 0 */ #define STP4020_ICR0_rsvd1 0xc000 /* reserved bits */ #define STP4020_ICR0_PROMEN 0x2000 /* FCode PROM enable */ /* Status change interrupts can be routed to one of two SBus interrupt levels:*/ #define STP4020_ICR0_SCILVL 0x1000 /* card status change interrupt level */ #define STP4020_ICR0_SCILVL_SB0 0x0000 /* interrupt on *SB_INT[0] */ #define STP4020_ICR0_SCILVL_SB1 0x1000 /* interrupt on *SB_INT[1] */ /* Interrupt enable bits: */ #define STP4020_ICR0_CDIE 0x0800 /* card detect interrupt enable */ #define STP4020_ICR0_BVD2IE 0x0400 /* battery voltage detect 2 int en. */ #define STP4020_ICR0_BVD1IE 0x0200 /* battery voltage detect 1 int en. */ #define STP4020_ICR0_RDYIE 0x0100 /* ready/busy interrupt enable */ #define STP4020_ICR0_WPIE 0x0080 /* write protect interrupt enable */ #define STP4020_ICR0_CTOIE 0x0040 /* PC card timeout interrupt enable */ #define STP4020_ICR0_rsvd2 0x0020 /* */ #define STP4020_ICR0_IOIE 0x0010 /* I/O (*IRQ) interrupt enable */ /* PC card I/O interrupts can also be routed to one of two SBus intr levels: */ #define STP4020_ICR0_IOILVL 0x0008 /* I/O (*IRQ) interrupt level (SBus) */ #define STP4020_ICR0_IOILVL_SB0 0x0000 /* interrupt on *SB_INT[0] */ #define STP4020_ICR0_IOILVL_SB1 0x0008 /* interrupt on *SB_INT[1] */ #define STP4020_ICR0_SPKREN 0x0004 /* *SPKR_OUT enable */ #define STP4020_ICR0_RESET 0x0002 /* PC card reset */ #define STP4020_ICR0_IFTYPE 0x0001 /* PC card interface type */ #define STP4020_ICR0_IFTYPE_MEM 0x0000 /* MEMORY only */ #define STP4020_ICR0_IFTYPE_IO 0x0001 /* MEMORY and I/O */ #define STP4020_ICR0_BITS "\177\010" \ "b\0IFTYPE\0b\1RESET\0b\2SPKREN\0" \ "b\3IOILVL\0b\4IOIE\0b\6CTOIE\0" \ "b\7WPIE\0b\10RDYIE\0b\11BVD1IE\0b\12BVD2IE\0"\ "b\13CDIE\0b\14SCILV\0b\15PROMEN\0\0" /* Shorthand for all status change interrupts enables */ #define STP4020_ICR0_ALL_STATUS_IE ( \ STP4020_ICR0_CDIE | \ STP4020_ICR0_BVD2IE | \ STP4020_ICR0_BVD1IE | \ STP4020_ICR0_RDYIE | \ STP4020_ICR0_WPIE | \ STP4020_ICR0_CTOIE \ ) /* * Socket Interface Control register 1 */ #define STP4020_ICR1_LPBKEN 0x8000 /* PC card data loopback enable */ #define STP4020_ICR1_CD1DB 0x4000 /* card detect 1 diagnostic bit */ #define STP4020_ICR1_BVD2DB 0x2000 /* battery voltage detect 2 diag bit */ #define STP4020_ICR1_BVD1DB 0x1000 /* battery voltage detect 1 diag bit */ #define STP4020_ICR1_RDYDB 0x0800 /* ready/busy diagnostic bit */ #define STP4020_ICR1_WPDB 0x0400 /* write protect diagnostic bit */ #define STP4020_ICR1_WAITDB 0x0200 /* *WAIT diagnostic bit */ #define STP4020_ICR1_DIAGEN 0x0100 /* diagnostic enable bit */ #define STP4020_ICR1_rsvd1 0x0080 /* reserved */ #define STP4020_ICR1_APWREN 0x0040 /* PC card auto power switch enable */ /* * The Vpp controls are two-bit fields which specify which voltage * should be switched onto Vpp for this socket. * * Both of the "no connect" states are equal. */ #define STP4020_ICR1_VPP2EN 0x0030 /* Vpp2 power enable */ #define STP4020_ICR1_VPP2_OFF 0x0000 /* no connect */ #define STP4020_ICR1_VPP2_VCC 0x0010 /* Vcc switched onto Vpp2 */ #define STP4020_ICR1_VPP2_VPP 0x0020 /* Vpp switched onto Vpp2 */ #define STP4020_ICR1_VPP2_ZIP 0x0030 /* no connect */ #define STP4020_ICR1_VPP1EN 0x000c /* Vpp1 power enable */ #define STP4020_ICR1_VPP1_OFF 0x0000 /* no connect */ #define STP4020_ICR1_VPP1_VCC 0x0004 /* Vcc switched onto Vpp1 */ #define STP4020_ICR1_VPP1_VPP 0x0008 /* Vpp switched onto Vpp1 */ #define STP4020_ICR1_VPP1_ZIP 0x000c /* no connect */ #define STP4020_ICR1_MSTPWR 0x0002 /* PC card master power enable */ #define STP4020_ICR1_PCIFOE 0x0001 /* PC card interface output enable */ #define STP4020_ICR1_BITS "\177\010" \ "b\0PCIFOE\0b\1MSTPWR\0f\2\2VPP1EN\0" \ "f\4\2VPP2EN\0b\6APWREN\0b\10DIAGEN\0" \ "b\11WAITDB\0b\12WPDB\0b\13RDYDB\0" \ "b\14BVD1D\0b\15BVD2D\0\16CD1DB\0b\17LPBKEN\0" /* * Socket Interface Status register 0 * * Some signals in this register change meaning depending on whether * the socket is configured as MEMORY-ONLY or MEMORY & I/O: * mo: valid only if the socket is in memory-only mode * io: valid only if the socket is in memory and I/O mode. * * Pending interrupts are cleared by writing the corresponding status * bit set in the upper half of this register. */ #define STP4020_ISR0_ZERO 0x8000 /* always reads back as zero (mo) */ #define STP4020_ISR0_IOINT 0x8000 /* PC card I/O intr (*IRQ) posted (io)*/ #define STP4020_ISR0_SCINT 0x4000 /* status change interrupt posted */ #define STP4020_ISR0_CDCHG 0x2000 /* card detect status change */ #define STP4020_ISR0_BVD2CHG 0x1000 /* battery voltage detect 2 status change */ #define STP4020_ISR0_BVD1CHG 0x0800 /* battery voltage detect 1 status change */ #define STP4020_ISR0_RDYCHG 0x0400 /* ready/busy status change */ #define STP4020_ISR0_WPCHG 0x0200 /* write protect status change */ #define STP4020_ISR0_PCTO 0x0100 /* PC card access timeout */ #define STP4020_ISR0_ALL_STATUS_IRQ 0x7f00 #define STP4020_ISR0_LIVE 0x00ff /* live status bit mask */ #define STP4020_ISR0_CD2ST 0x0080 /* card detect 2 live status */ #define STP4020_ISR0_CD1ST 0x0040 /* card detect 1 live status */ #define STP4020_ISR0_BVD2ST 0x0020 /* battery voltage detect 2 live status (mo) */ #define STP4020_ISR0_SPKR 0x0020 /* SPKR signal live status (io)*/ #define STP4020_ISR0_BVD1ST 0x0010 /* battery voltage detect 1 live status (mo) */ #define STP4020_ISR0_STSCHG 0x0010 /* I/O *STSCHG signal live status (io)*/ #define STP4020_ISR0_RDYST 0x0008 /* ready/busy live status (mo) */ #define STP4020_ISR0_IOREQ 0x0008 /* I/O *REQ signal live status (io) */ #define STP4020_ISR0_WPST 0x0004 /* write protect live status (mo) */ #define STP4020_ISR0_IOIS16 0x0004 /* IOIS16 signal live status (io) */ #define STP4020_ISR0_WAITST 0x0002 /* wait signal live status */ #define STP4020_ISR0_PWRON 0x0001 /* PC card power status */ #define STP4020_ISR0_IOBITS "\177\010" \ "b\0PWRON\0b\1WAITST\0b\2IOIS16\0b\3IOREQ\0" \ "b\4STSCHG\0b\5SPKR\0b\6CD1ST\0b\7CD2ST\0" \ "b\10PCTO\0b\11WPCHG\0b\12RDYCHG\0" \ "b\13BVD1CHG\0b\14BVD2CHG\0b\15CDCHG\0" \ "b\16SCINT\0b\17IOINT\0\0" #define STP4020_ISR0_MOBITS "\177\010" \ "b\0PWRON\0b\1WAITST\0b\2WPST\0b\3RDYST\0" \ "b\4BVD1ST\0b\5BVD2ST\0b\6CD1ST\0b\7CD2ST\0" \ "b\10PCTO\0b\11WPCHG\0b\12RDYCHG\0" \ "b\13BVD1CHG\0b\14BVD2CHG\0b\15CDCHG\0" \ "b\16SCINT\0\0" /* * Socket Interface Status register 1 */ #define STP4020_ISR1_rsvd 0xffc0 /* reserved */ #define STP4020_ISR1_PCTYPE_M 0x0030 /* PC card type(s) supported bit mask */ #define STP4020_ISR1_PCTYPE_S 4 /* PC card type(s) supported bit shift */ #define STP4020_ISR1_REV_M 0x000f /* ASIC revision level bit mask */ #define STP4020_ISR1_REV_S 0 /* ASIC revision level bit shift */ #define STP4020_ISR1_BITS "\177\010" \ "f\0\4REV\0f\4\2PCTYPE\0\0" \ /* * Socket window control/status register definitions. * * According to SunOS 5.5: * "Each PCMCIA socket has three windows associated with it; each of * these windows can be programmed to map in either the AM, CM or IO * space on the PC card. Each window can also be programmed with a * starting or base address relative to the PC card's address zero. * Each window is a fixed 1Mb in size. * * Each window has two window control registers associated with it to * control the window's PCMCIA bus timing parameters, PC card address * space that that window maps, and the base address in the * selected PC card's address space." */ #define STP4020_WINDOW_SIZE (1024*1024) /* 1MB */ #define STP4020_WINDOW_SHIFT 20 /* for 1MB */ /* * PC card Window Control register 0 */ #define STP4020_WCR0_rsvd 0x8000 /* reserved */ #define STP4020_WCR0_CMDLNG_M 0x7c00 /* command strobe length bit mask */ #define STP4020_WCR0_CMDLNG_S 10 /* command strobe length bit shift */ #define STP4020_WCR0_CMDDLY_M 0x0300 /* command strobe delay bit mask */ #define STP4020_WCR0_CMDDLY_S 8 /* command strobe delay bit shift */ #define STP4020_MEM_SPEED_MIN 100 #define STP4020_MEM_SPEED_MAX 1370 /* * The ASPSEL (Address Space Select) bits control which of the three PC card * address spaces this window maps in. */ #define STP4020_WCR0_ASPSEL_M 0x00c0 /* address space select bit mask */ #define STP4020_WCR0_ASPSEL_AM 0x0000 /* attribute memory */ #define STP4020_WCR0_ASPSEL_CM 0x0040 /* common memory */ #define STP4020_WCR0_ASPSEL_IO 0x0080 /* I/O */ /* * The base address controls which 1MB range in the 64MB card address space * this window maps to. */ #define STP4020_WCR0_BASE_M 0x0003f /* base address bit mask */ #define STP4020_WCR0_BASE_S 0 /* base address bit shift */ #define STP4020_ADDR2PAGE(x) ((x) >> 20) /* * PC card Window Control register 1 */ #define STP4020_WCR1_rsvd 0xffe0 /* reserved */ #define STP4020_WCR1_RECDLY_M 0x0018 /* recovery delay bit mask */ #define STP4020_WCR1_RECDLY_S 3 /* recovery delay bit shift */ #define STP4020_WCR1_WAITDLY_M 0x0006 /* *WAIT signal delay bit mask */ #define STP4020_WCR1_WAITDLY_S 1 /* *WAIT signal delay bit shift */ #define STP4020_WCR1_WAITREQ_M 0x0001 /* *WAIT signal is required bit mask */ #define STP4020_WCR1_WAITREQ_S 0 /* *WAIT signal is required bit shift */ #if for_reference_only /* * STP4020 CSR structures * * There is one stp4020_regs_t structure per instance, and it refers to * the complete Stp4020 register set. * * For each socket, there is one stp4020_socket_csr_t structure, which * refers to all the registers for that socket. That structure is * made up of the window register structures as well as the registers * that control overall socket operation. * * For each window, there is one stp4020_window_ctl_t structure, which * refers to all the registers for that window. */ /* * per-window CSR structure */ typedef struct stp4020_window_ctl_t { volatile ushort_t ctl0; /* window control register 0 */ volatile ushort_t ctl1; /* window control register 1 */ } stp4020_window_ctl_t; /* * per-socket CSR structure */ typedef struct stp4020_socket_csr_t { volatile struct stp4020_window_ctl_t window[STP4020_NWIN]; volatile ushort_t ctl0; /* socket control register 0 */ volatile ushort_t ctl1; /* socket control register 1 */ volatile ushort_t stat0; /* socket status register 0 */ volatile ushort_t stat1; /* socket status register 1 */ volatile uchar_t filler[12]; /* filler space */ } stp4020_socket_csr_t; /* * per-instance CSR structure */ typedef struct stp4020_regs_t { struct stp4020_socket_csr_t socket[STP4020_NSOCK]; /* socket CSRs */ } stp4020_regs_t; #endif /* reference */ /* Size of control and status register banks */ #define STP4020_SOCKREGS_SIZE 32 #define STP4020_WINREGS_SIZE 4 /* Relative socket control & status register offsets */ #define STP4020_ICR0_IDX 12 #define STP4020_ICR1_IDX 14 #define STP4020_ISR0_IDX 16 #define STP4020_ISR1_IDX 18 /* Relative Window control register offsets */ #define STP4020_WCR0_IDX 0 #define STP4020_WCR1_IDX 2 /* Socket control and status register offsets */ #define STP4020_ICR0_REG(s) ((32 * (s)) + STP4020_ICR0_IDX) #define STP4020_ICR1_REG(s) ((32 * (s)) + STP4020_ICR1_IDX) #define STP4020_ISR0_REG(s) ((32 * (s)) + STP4020_ISR0_IDX) #define STP4020_ISR1_REG(s) ((32 * (s)) + STP4020_ISR1_IDX) /* Window control and status registers; one set per socket */ #define STP4020_WCR0_REG(s,w) ((32 * (s)) + (4 * (w)) + STP4020_WCR0_IDX) #define STP4020_WCR1_REG(s,w) ((32 * (s)) + (4 * (w)) + STP4020_WCR1_IDX) #endif /* _STP4020_REG_H */