/* $OpenBSD: uperf_sbusreg.h,v 1.2 2002/04/08 17:49:42 jason Exp $ */ /* * Copyright (c) 2002 Jason L. Wright (jason@thought.net) * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by Jason L. Wright * 4. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. * * Effort sponsored in part by the Defense Advanced Research Projects * Agency (DARPA) and Air Force Research Laboratory, Air Force * Materiel Command, USAF, under agreement number F30602-01-2-0537. * */ /* * System Controller registers (for both uni- and dual- processor versions) */ /* * Ebus interface registers */ #define USC_ADDR 0x0000 #define USC_DATA 0x0004 /* Indirect registers */ #define USC_CTRL 0x00 /* overall: control */ #define USC_ID 0x04 /* overall: identity */ #define USC_PERF0 0x08 /* overall: perf counter 0 */ #define USC_PERF1 0x0c /* overall: perf connter 1 */ #define USC_PERFSHAD 0x10 /* overall: perf shadow */ #define USC_PERFCTRL 0x20 /* overall: perf control */ #define USC_DBGPIN 0x30 /* overall: debug pin control */ #define USC_P0CFG 0x40 /* port/processor 1 config */ #define USC_P0STS 0x44 /* port/processor 0 status */ #define USC_P1CFG 0x48 /* port/processor 1 config */ #define USC_P1STS 0x4c /* port/processor 1 status */ #define USC_SYSIOCFG 0x50 /* sysio/u2s port config */ #define USC_SYSIOSTS 0x54 /* sysio/u2s port status */ #define USC_FFBCFG 0x58 /* dsc: ffb config */ #define USC_FFBSTS 0x5c /* dsc: ffb status */ #define USC_MCCTRL0 0x60 /* usc: memory control 0 */ #define USC_MCCTRL1 0x64 /* usc: memory control 1 */ #define USC_CCDIAG 0x70 /* dsc: */ #define USC_CCVEC 0x74 /* dsc: */ #define USC_CCFLT 0x78 /* dsc: */ #define USC_CCPRC 0x7c /* dsc: */ #define USC_MEM0 0x80 /* dsc: mem control 0 */ #define USC_MEM1 0x84 /* dsc: RAS control */ #define USC_MEM2 0x88 /* dsc: CAS_RD control */ #define USC_MEM3 0x8c /* dsc: Bank_Sel control */ #define USC_MEM4 0x90 /* dsc: BMX_Buffer control */ #define USC_MEM5 0x94 /* dsc: CAS_WR control */ #define USC_MEM6 0x98 /* dsc: Phase_Level control */ #define USC_MEM7 0x9c /* dsc: SIMM_Busy_Rd control */ #define USC_MEM8 0xa0 /* dsc: Count_Control */ #define USC_MEM9 0xa4 /* dsc: Refresh control */ #define USC_MEMA 0xa8 /* dsc: Row control */ #define USC_MEMB 0xac /* dsc: guess! */ #define USC_CTRL_POR 0x80000000 /* power on reset */ #define USC_CTRL_SFTPOR 0x40000000 /* last reset was soft */ #define USC_CTRL_XIR 0x20000000 /* initiate XIR */ #define USC_CTRL_BPOR 0x10000000 /* last reset was scan */ #define USC_CTRL_BXIR 0x08000000 /* last reset was xir */ #define USC_CTRL_WAKEUP 0x04000000 /* last reset was wakeup */ #define USC_CTRL_FATAL 0x02000000 /* fatal error detect */ #define USC_CTRL_IAP 0x00800000 /* inv parity on addr bus */ #define USC_CTRL_ENWKUP 0x00400000 /* enable wakeup POR */ #define USC_ID_JEDEC 0xffff0000 /* JEDEC ID */ #define USC_ID_UPANUM_M 0x0000f000 /* #UPA ports supported mask */ #define USC_ID_UPANUM_S 12 /* #UPA ports supported shift */ #define USC_ID_IMPL_M 0x000000f0 /* implementation # mask */ #define USC_ID_IMPL_S 4 /* implementation # shift */ #define USC_ID_VERS_M 0x0000000f /* version mask */ #define USC_ID_VERS_S 0 /* version shift */ #define USC_PCTRL_CLR1 0x00008000 /* clear cntr in SEL1 */ #define USC_PCTRL_SEL1 0x00000f00 /* event source 1 */ #define USC_PCTRL_CLR0 0x00000080 /* clear cntrl in SEL0 */ #define USC_PCTRL_SEL0 0x0000000f /* event source 0 */ /* Event sources, counter 0 */ #define SEL0_SYSCK 0x00000000 /* system clock count */ #define SEL0_PRALL 0x00000001 /* prequests, all sources */ #define SEL0_PRP0 0x00000002 /* prequests, proc 0 */ #define SEL0_PRUS 0x00000004 /* prequests, u2s */ #define SEL0_128BUSY 0x00000005 /* # of cycles 128bit UPA busy */ #define SEL0_64BUSY 0x00000006 /* # of cycles 64bit UPA busy */ #define SEL0_PIOSTALL 0x00000007 /* # cycles stalled during PIO */ #define SEL0_MEMREQ 0x00000008 /* # memory requests issued */ #define SEL0_MCBUSY 0x00000009 /* # cycles memory controller busy */ #define SEL0_PENDSTALL 0x0000000a /* # stalls pending xact scbd hit */ #define SEL0_CWMRP0 0x0000000b /* # coherent write miss req, prc0 */ #define SEL0_CWMRP1 0x0000000c /* # coherent write miss req, prc1 */ #define SEL0_CIT 0x0000000d /* # coherent intervene xacts */ #define SEL0_DACT 0x0000000e /* # data transactions from u2s */ #define SEL0_CRXI 0x0000000f /* # coherent read xacts issued */ /* Event sources, counter 1 */ #define SEL1_SYSCK 0x00000000 /* system clock count */ #define SEL1_PRALL 0x00000001 /* prequests, all sources */ #define SEL1_PRP0 0x00000002 /* prequests, proc 0 */ #define SEL1_PRUS 0x00000004 /* prequests, u2s */ #define SEL1_RDP0 0x00000005 /* read reqs from P0 */ #define SEL1_CRMP0 0x00000006 /* coherent read misses from P0 */ #define SEL1_PIOP0 0x00000007 /* PIO accesses from P0 */ #define SEL1_MRI 0x00000008 /* memory reqs issued */ #define SEL1_MRC 0x00000009 /* memory reqs complete */ #define SEL1_RDP1 0x0000000a /* read reqs from P1 */ #define SEL1_CRMP1 0x0000000b /* coherent read misses from P1 */ #define SEL1_PIOP1 0x0000000c /* PIO accesses from P1 */ #define SEL1_CWXI 0x0000000d /* coherent write xacts issued */ #define SEL1_DXU 0x0000000e /* # data xacts from u2s */ /* Port config (USC_P0CFG, USC_P1CFG, USC_SYSIOCFG, USC_FFBCFG) */ #define USC_PCFG_MD 0x80000000 /* master disable */ #define USC_PCFG_SSLP 0x40000000 /* slave sleep */ #define USC_PCFG_SPRQS 0x0f000000 /* slave prequest queue size */ #define USC_PCFG_SIQS 0x00030000 /* slave interrupt queue size */ #define USC_PCFG_SQEN 0x00008000 /* qualifies writes to SPRQS,SIQS */ #define USC_PCFG_ONER 0x00004000 /* one read */ /* Port status (USC_P0STS, USC_P1STS, USC_SYSIOSTS, USC_FFBSTS) */ #define USC_PSTS_FATAL 0x80000000 /* fatal error detected */ #define USC_PSTS_IADDR 0x40000000 /* invalid address */ #define USC_PSTS_IPORT 0x20000000 /* invalid port */ #define USC_PSTS_IPRTY 0x10000000 /* parity error */ #define USC_PSTS_MC0OF 0x08000000 /* master class 0 overflow */ #define USC_PSTS_MC1OF 0x04000000 /* master class 1 overflow */ #define USC_PSTS_MCQ0 0x03800000 /* # reqs before mc0 overflow */ #define USC_PSTS_MC1Q 0x00700000 /* # reqs before mc1 overflow */ /* usc: memory control 0 */ #define USC_MC0_REFEN 0x80000000 /* refresh enable */ #define USC_MC0_SIMP 0x0000ff00 /* simms present */ #define USC_MC0_REFI 0x000000ff /* refresh interval */ /* usc: memory control 1 */ #define USC_MC1_CSR 0x00001000 /* CAS-to-RAS delay for CBR ref cyc */ #define USC_MC1_WPC1 0x00000c00 /* page cycle 1 write */ #define USC_MC1_RCD 0x00000200 /* RAS-to-CAS delay */ #define USC_MC1_CP 0x00000100 /* CAS precharge */ #define USC_MC1_RP 0x000000c0 /* RAS precharge */ #define USC_MC1_RAS 0x00000030 /* length of RAS for precharge */ #define USC_MC1_PC0 0x0000000c /* page cycle 0 */ #define USC_MC1_PC1 0x00000003 /* page cycle 1 */ /* dsc: memory control 0 */ #define USC_MEM0_REFE 0x80000000 /* refresh enable */ #define USC_MEM0_FSME 0x10000000 /* fsm error */ #define USC_MEM0_PPE 0x08000000 /* ping-pong buffer error */ #define USC_MEM0_DPSE 0x04000000 /* data path scheduler error */ #define USC_MEM0_MCE 0x02000000 /* memory controller error */ #define USC_MEM0_MRE 0x01000000 /* missed refresh error */ #define USC_MEM0_RPMC 0x00800000 /* RAS Phi 0 cookie for refresh */ #define USC_MEM0_RWMC 0x00400000 /* RAS Phi 0 cookie for writers */ #define USC_MEM0_SW0 0x001f0000 /* strecth count for first write */ #define USC_MEM0_SP 0x00000f00 /* simm present mask */ #define USC_MEM0_REFI 0x000000ff /* refresh interval */ /* cache coherence diagnostic: USC_CCDIAG */ #define USC_CCDIAG_SNP 0xffff0000 /* SRAM address */ #define USC_CCDIAG_DME 0x00008000 /* enable writes to DTAG */ /* cache coherence snoop vector: USC_CCVEC */ #define USC_CCVEC_TAG 0x7ff80000 /* tag portion of SRAM data */ #define USC_CCVEC_ST 0x00060000 /* state portion of SRAM data */ #define USC_CCVEC_PAR 0x00010000 /* parity portion of SRAM data */ /* cache coherence fault: USC_CCFLT */ #define USC_CCFLT_PERR0 0x80000000 /* dual tag parity error, proc 0 */ #define USC_CCFLT_CERR0 0x40000000 /* coherence error, proc 0 */ #define USC_CCFLT_PERR1 0x20000000 /* dual tag parity error, proc 1 */ #define USC_CCFLT_CERR1 0x10000000 /* coherence error, proc 1 */ #define USC_CCFLT_IDX 0x0fffe000 /* index of fault */ /* cache coherence processor index: USC_CCPRC */ #define USC_CCPRC_PIDX 0x7fffffff /* address mask for ports 1 & 2 */