/* $OpenBSD: if_atu.c,v 1.87 2007/09/17 01:40:38 fgsch Exp $ */ /* * Copyright (c) 2003, 2004 * Daan Vreeken . All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by Daan Vreeken. * 4. Neither the name of the author nor the names of any co-contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY Daan Vreeken AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL Daan Vreeken OR THE VOICES IN HIS HEAD * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF * THE POSSIBILITY OF SUCH DAMAGE. */ /* * Atmel AT76c503 / AT76c503a / AT76c505 / AT76c505a USB WLAN driver * version 0.5 - 2004-08-03 * * Originally written by Daan Vreeken * http://vitsch.net/bsd/atuwi * * Contributed to by : * Chris Whitehouse, Alistair Phillips, Peter Pilka, Martijn van Buul, * Suihong Liang, Arjan van Leeuwen, Stuart Walsh * * Ported to OpenBSD by Theo de Raadt and David Gwynne. */ #include "bpfilter.h" #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #if NBPFILTER > 0 #include #endif #include #include #include #ifdef INET #include #include #endif #include #include #ifdef USB_DEBUG #define ATU_DEBUG #endif #include #ifdef ATU_DEBUG #define DPRINTF(x) do { if (atudebug) printf x; } while (0) #define DPRINTFN(n,x) do { if (atudebug>(n)) printf x; } while (0) int atudebug = 1; #else #define DPRINTF(x) #define DPRINTFN(n,x) #endif int atu_match(struct device *, void *, void *); void atu_attach(struct device *, struct device *, void *); int atu_detach(struct device *, int); int atu_activate(struct device *, enum devact); struct cfdriver atu_cd = { NULL, "atu", DV_IFNET }; const struct cfattach atu_ca = { sizeof(struct atu_softc), atu_match, atu_attach, atu_detach, atu_activate, }; /* * Various supported device vendors/products/radio type. */ struct atu_type atu_devs[] = { { USB_VENDOR_3COM, USB_PRODUCT_3COM_3CRSHEW696, RadioRFMD, ATU_NO_QUIRK }, { USB_VENDOR_ABOCOM, USB_PRODUCT_ABOCOM_BWU613, RadioRFMD, ATU_NO_QUIRK }, { USB_VENDOR_ACCTON, USB_PRODUCT_ACCTON_2664W, AT76C503_rfmd_acc, ATU_NO_QUIRK }, { USB_VENDOR_ACERP, USB_PRODUCT_ACERP_AWL300, RadioIntersil, ATU_NO_QUIRK }, { USB_VENDOR_ACERP, USB_PRODUCT_ACERP_AWL400, RadioRFMD, ATU_NO_QUIRK }, { USB_VENDOR_ACTIONTEC, USB_PRODUCT_ACTIONTEC_802UAT1, RadioRFMD, ATU_NO_QUIRK }, { USB_VENDOR_ADDTRON, USB_PRODUCT_ADDTRON_AWU120, RadioIntersil, ATU_NO_QUIRK }, { USB_VENDOR_AINCOMM, USB_PRODUCT_AINCOMM_AWU2000B, RadioRFMD2958, ATU_NO_QUIRK }, { USB_VENDOR_ASKEY, USB_PRODUCT_ASKEY_VOYAGER1010, RadioIntersil, ATU_NO_QUIRK }, { USB_VENDOR_ASKEY, USB_PRODUCT_ASKEY_WLL013I, RadioIntersil, ATU_NO_QUIRK }, { USB_VENDOR_ASKEY, USB_PRODUCT_ASKEY_WLL013, RadioRFMD, ATU_NO_QUIRK }, { USB_VENDOR_ATMEL, USB_PRODUCT_ATMEL_AT76C503I1, RadioIntersil, ATU_NO_QUIRK }, { USB_VENDOR_ATMEL, USB_PRODUCT_ATMEL_AT76C503I2, AT76C503_i3863, ATU_NO_QUIRK }, { USB_VENDOR_ATMEL, USB_PRODUCT_ATMEL_AT76C503RFMD, RadioRFMD, ATU_NO_QUIRK }, { USB_VENDOR_ATMEL, USB_PRODUCT_ATMEL_AT76C505RFMD, AT76C505_rfmd, ATU_NO_QUIRK }, { USB_VENDOR_ATMEL, USB_PRODUCT_ATMEL_AT76C505RFMD2958, RadioRFMD2958, ATU_NO_QUIRK }, { USB_VENDOR_ATMEL, USB_PRODUCT_ATMEL_AT76C505A, /* SMC2662 V.4 */ RadioRFMD2958_SMC, ATU_QUIRK_NO_REMAP | ATU_QUIRK_FW_DELAY }, { USB_VENDOR_ATMEL, USB_PRODUCT_ATMEL_AT76C505AS, /* quirk? */ RadioRFMD2958_SMC, ATU_QUIRK_NO_REMAP | ATU_QUIRK_FW_DELAY }, { USB_VENDOR_ATMEL, USB_PRODUCT_ATMEL_WN210, RadioRFMD, ATU_NO_QUIRK }, { USB_VENDOR_BELKIN, USB_PRODUCT_BELKIN_F5D6050, RadioRFMD, ATU_NO_QUIRK }, { USB_VENDOR_CONCEPTRONIC, USB_PRODUCT_CONCEPTRONIC_C11U, RadioIntersil, ATU_NO_QUIRK }, { USB_VENDOR_CONCEPTRONIC, USB_PRODUCT_CONCEPTRONIC_WL210, RadioIntersil, ATU_NO_QUIRK }, { USB_VENDOR_COMPAQ, USB_PRODUCT_COMPAQ_IPAQWLAN, RadioRFMD, ATU_NO_QUIRK }, { USB_VENDOR_COREGA, USB_PRODUCT_COREGA_WLUSB_11_STICK, RadioRFMD2958, ATU_NO_QUIRK }, { USB_VENDOR_DICKSMITH, USB_PRODUCT_DICKSMITH_CHUSB611G, RadioRFMD2958, ATU_NO_QUIRK }, { USB_VENDOR_DICKSMITH, USB_PRODUCT_DICKSMITH_WL200U, RadioRFMD, ATU_NO_QUIRK }, { USB_VENDOR_DICKSMITH, USB_PRODUCT_DICKSMITH_WL240U, RadioRFMD2958, ATU_NO_QUIRK }, { USB_VENDOR_DICKSMITH, USB_PRODUCT_DICKSMITH_XH1153, RadioRFMD, ATU_NO_QUIRK }, { USB_VENDOR_DLINK, USB_PRODUCT_DLINK_DWL120E, RadioRFMD, ATU_NO_QUIRK }, { USB_VENDOR_GIGABYTE, USB_PRODUCT_GIGABYTE_GNWLBM101, RadioRFMD, ATU_NO_QUIRK }, { USB_VENDOR_GIGASET, USB_PRODUCT_GIGASET_WLAN, /* quirk? */ RadioRFMD2958_SMC, ATU_QUIRK_NO_REMAP | ATU_QUIRK_FW_DELAY }, { USB_VENDOR_HP, USB_PRODUCT_HP_HN210W, RadioIntersil, ATU_NO_QUIRK }, { USB_VENDOR_INTEL, USB_PRODUCT_INTEL_AP310, RadioIntersil, ATU_NO_QUIRK }, { USB_VENDOR_IODATA, USB_PRODUCT_IODATA_USBWNB11A, RadioIntersil, ATU_NO_QUIRK }, { USB_VENDOR_LEXAR, USB_PRODUCT_LEXAR_2662WAR, RadioRFMD, ATU_NO_QUIRK }, { USB_VENDOR_LINKSYS, USB_PRODUCT_LINKSYS_WUSB11, RadioIntersil, ATU_NO_QUIRK }, { USB_VENDOR_LINKSYS2, USB_PRODUCT_LINKSYS2_WUSB11, RadioRFMD, ATU_NO_QUIRK }, { USB_VENDOR_LINKSYS2, USB_PRODUCT_LINKSYS2_NWU11B, RadioRFMD, ATU_NO_QUIRK }, { USB_VENDOR_LINKSYS3, USB_PRODUCT_LINKSYS3_WUSB11V28, RadioRFMD2958, ATU_NO_QUIRK }, { USB_VENDOR_MSI, USB_PRODUCT_MSI_WLAN, RadioRFMD2958, ATU_NO_QUIRK }, { USB_VENDOR_NETGEAR2, USB_PRODUCT_NETGEAR2_MA101, RadioIntersil, ATU_NO_QUIRK }, { USB_VENDOR_NETGEAR2, USB_PRODUCT_NETGEAR2_MA101B, RadioRFMD, ATU_NO_QUIRK }, { USB_VENDOR_OQO, USB_PRODUCT_OQO_WIFI01, RadioRFMD2958_SMC, ATU_QUIRK_NO_REMAP | ATU_QUIRK_FW_DELAY }, { USB_VENDOR_PLANEX2, USB_PRODUCT_PLANEX2_GW_US11S, RadioRFMD, ATU_NO_QUIRK }, { USB_VENDOR_SAMSUNG, USB_PRODUCT_SAMSUNG_SWL2100W, AT76C503_i3863, ATU_NO_QUIRK }, { USB_VENDOR_SIEMENS2, USB_PRODUCT_SIEMENS2_WLL013, RadioRFMD, ATU_NO_QUIRK }, { USB_VENDOR_SMC3, USB_PRODUCT_SMC3_2662WV1, RadioIntersil, ATU_NO_QUIRK }, { USB_VENDOR_SMC3, USB_PRODUCT_SMC3_2662WV2, AT76C503_rfmd_acc, ATU_NO_QUIRK }, { USB_VENDOR_TEKRAM, USB_PRODUCT_TEKRAM_U300C, RadioIntersil, ATU_NO_QUIRK }, { USB_VENDOR_ZCOM, USB_PRODUCT_ZCOM_M4Y750, RadioIntersil, ATU_NO_QUIRK }, }; struct atu_radfirm { enum atu_radio_type atur_type; char *atur_internal; char *atur_external; u_int8_t max_rssi; } atu_radfirm[] = { { RadioRFMD, "atu-rfmd-int", "atu-rfmd-ext", 0 }, { RadioRFMD2958, "atu-rfmd2958-int", "atu-rfmd2958-ext", 81 }, { RadioRFMD2958_SMC, "atu-rfmd2958smc-int", "atu-rfmd2958smc-ext", 0 }, { RadioIntersil, "atu-intersil-int", "atu-intersil-ext", 0 }, { AT76C503_i3863, "atu-at76c503-i3863-int", "atu-at76c503-i3863-ext", 0 }, { AT76C503_rfmd_acc, "atu-at76c503-rfmd-acc-int", "atu-at76c503-rfmd-acc-ext", 0 }, { AT76C505_rfmd, "atu-at76c505-rfmd-int", "atu-at76c505-rfmd-ext", 0 } }; int atu_newbuf(struct atu_softc *, struct atu_chain *, struct mbuf *); void atu_rxeof(usbd_xfer_handle, usbd_private_handle, usbd_status); void atu_txeof(usbd_xfer_handle, usbd_private_handle, usbd_status); void atu_start(struct ifnet *); int atu_ioctl(struct ifnet *, u_long, caddr_t); int atu_init(struct ifnet *); void atu_stop(struct ifnet *, int); void atu_watchdog(struct ifnet *); usbd_status atu_usb_request(struct atu_softc *sc, u_int8_t type, u_int8_t request, u_int16_t value, u_int16_t index, u_int16_t length, u_int8_t *data); int atu_send_command(struct atu_softc *sc, u_int8_t *command, int size); int atu_get_cmd_status(struct atu_softc *sc, u_int8_t cmd, u_int8_t *status); int atu_wait_completion(struct atu_softc *sc, u_int8_t cmd, u_int8_t *status); int atu_send_mib(struct atu_softc *sc, u_int8_t type, u_int8_t size, u_int8_t index, void *data); int atu_get_mib(struct atu_softc *sc, u_int8_t type, u_int8_t size, u_int8_t index, u_int8_t *buf); #if 0 int atu_start_ibss(struct atu_softc *sc); #endif int atu_start_scan(struct atu_softc *sc); int atu_switch_radio(struct atu_softc *sc, int state); int atu_initial_config(struct atu_softc *sc); int atu_join(struct atu_softc *sc, struct ieee80211_node *node); int8_t atu_get_dfu_state(struct atu_softc *sc); u_int8_t atu_get_opmode(struct atu_softc *sc, u_int8_t *mode); void atu_internal_firmware(void *); void atu_external_firmware(void *); int atu_get_card_config(struct atu_softc *sc); int atu_media_change(struct ifnet *ifp); void atu_media_status(struct ifnet *ifp, struct ifmediareq *req); int atu_tx_list_init(struct atu_softc *); int atu_rx_list_init(struct atu_softc *); void atu_xfer_list_free(struct atu_softc *sc, struct atu_chain *ch, int listlen); void atu_task(void *); int atu_newstate(struct ieee80211com *, enum ieee80211_state, int); int atu_tx_start(struct atu_softc *, struct ieee80211_node *, struct atu_chain *, struct mbuf *); void atu_complete_attach(struct atu_softc *); u_int8_t atu_calculate_padding(int); usbd_status atu_usb_request(struct atu_softc *sc, u_int8_t type, u_int8_t request, u_int16_t value, u_int16_t index, u_int16_t length, u_int8_t *data) { usb_device_request_t req; usbd_xfer_handle xfer; usbd_status err; int total_len = 0, s; req.bmRequestType = type; req.bRequest = request; USETW(req.wValue, value); USETW(req.wIndex, index); USETW(req.wLength, length); #ifdef ATU_DEBUG if (atudebug) { if ((data == NULL) || (type & UT_READ)) { DPRINTFN(20, ("%s: req=%02x val=%02x ind=%02x " "len=%02x\n", sc->atu_dev.dv_xname, request, value, index, length)); } else { DPRINTFN(20, ("%s: req=%02x val=%02x ind=%02x " "len=%02x [%8D]\n", sc->atu_dev.dv_xname, request, value, index, length, data, " ")); } } #endif /* ATU_DEBUG */ s = splnet(); xfer = usbd_alloc_xfer(sc->atu_udev); usbd_setup_default_xfer(xfer, sc->atu_udev, 0, 500000, &req, data, length, USBD_SHORT_XFER_OK, 0); err = usbd_sync_transfer(xfer); usbd_get_xfer_status(xfer, NULL, NULL, &total_len, NULL); #ifdef ATU_DEBUG if (atudebug) { if (type & UT_READ) { DPRINTFN(20, ("%s: transfered 0x%x bytes in\n", sc->atu_dev.dv_xname, total_len)); DPRINTFN(20, ("%s: dump [%10D]\n", sc->atu_dev.dv_xname, data, " ")); } else { if (total_len != length) DPRINTF(("%s: ARG! wrote only %x bytes\n", sc->atu_dev.dv_xname, total_len)); } } #endif /* ATU_DEBUG */ usbd_free_xfer(xfer); splx(s); return(err); } int atu_send_command(struct atu_softc *sc, u_int8_t *command, int size) { return atu_usb_request(sc, UT_WRITE_VENDOR_DEVICE, 0x0e, 0x0000, 0x0000, size, command); } int atu_get_cmd_status(struct atu_softc *sc, u_int8_t cmd, u_int8_t *status) { /* * all other drivers (including Windoze) request 40 bytes of status * and get a short-xfer of just 6 bytes. we can save 34 bytes of * buffer if we just request those 6 bytes in the first place :) */ /* return atu_usb_request(sc, UT_READ_VENDOR_INTERFACE, 0x22, cmd, 0x0000, 40, status); */ return atu_usb_request(sc, UT_READ_VENDOR_INTERFACE, 0x22, cmd, 0x0000, 6, status); } int atu_wait_completion(struct atu_softc *sc, u_int8_t cmd, u_int8_t *status) { int idle_count = 0, err; u_int8_t statusreq[6]; DPRINTFN(15, ("%s: wait-completion: cmd=%02x\n", sc->atu_dev.dv_xname, cmd)); while (1) { err = atu_get_cmd_status(sc, cmd, statusreq); if (err) return err; #ifdef ATU_DEBUG if (atudebug) { DPRINTFN(20, ("%s: status=%s cmd=%02x\n", sc->atu_dev.dv_xname, ether_sprintf(statusreq), cmd)); } #endif /* ATU_DEBUG */ /* * during normal operations waiting on STATUS_IDLE * will never happen more than once */ if ((statusreq[5] == STATUS_IDLE) && (idle_count++ > 20)) { DPRINTF(("%s: AAARRGGG!!! FIX ME!\n", sc->atu_dev.dv_xname)); return 0; } if ((statusreq[5] != STATUS_IN_PROGRESS) && (statusreq[5] != STATUS_IDLE)) { if (status != NULL) *status = statusreq[5]; return 0; } usbd_delay_ms(sc->atu_udev, 25); } } int atu_send_mib(struct atu_softc *sc, u_int8_t type, u_int8_t size, u_int8_t index, void *data) { int err; struct atu_cmd_set_mib request; /* * We don't construct a MIB packet first and then memcpy it into an * Atmel-command-packet, we just construct it the right way at once :) */ memset(&request, 0, sizeof(request)); request.AtCmd = CMD_SET_MIB; USETW(request.AtSize, size + 4); request.MIBType = type; request.MIBSize = size; request.MIBIndex = index; request.MIBReserved = 0; /* * For 1 and 2 byte requests we assume a direct value, * everything bigger than 2 bytes we assume a pointer to the data */ switch (size) { case 0: break; case 1: request.data[0]=(long)data & 0x000000ff; break; case 2: request.data[0]=(long)data & 0x000000ff; request.data[1]=(long)data >> 8; break; default: memcpy(request.data, data, size); break; } err = atu_usb_request(sc, UT_WRITE_VENDOR_DEVICE, 0x0e, 0x0000, 0x0000, size+8, (uByte *)&request); if (err) return (err); DPRINTFN(15, ("%s: sendmib : waitcompletion...\n", sc->atu_dev.dv_xname)); return atu_wait_completion(sc, CMD_SET_MIB, NULL); } int atu_get_mib(struct atu_softc *sc, u_int8_t type, u_int8_t size, u_int8_t index, u_int8_t *buf) { /* linux/at76c503.c - 478 */ return atu_usb_request(sc, UT_READ_VENDOR_INTERFACE, 0x033, type << 8, index, size, buf); } #if 0 int atu_start_ibss(struct atu_softc *sc) { int err; struct atu_cmd_start_ibss Request; Request.Cmd = CMD_START_IBSS; Request.Reserved = 0; Request.Size = sizeof(Request) - 4; memset(Request.BSSID, 0x00, sizeof(Request.BSSID)); memset(Request.SSID, 0x00, sizeof(Request.SSID)); memcpy(Request.SSID, sc->atu_ssid, sc->atu_ssidlen); Request.SSIDSize = sc->atu_ssidlen; if (sc->atu_desired_channel != IEEE80211_CHAN_ANY) Request.Channel = (u_int8_t)sc->atu_desired_channel; else Request.Channel = ATU_DEFAULT_CHANNEL; Request.BSSType = AD_HOC_MODE; memset(Request.Res, 0x00, sizeof(Request.Res)); /* Write config to adapter */ err = atu_send_command(sc, (u_int8_t *)&Request, sizeof(Request)); if (err) { DPRINTF(("%s: start ibss failed!\n", sc->atu_dev.dv_xname)); return err; } /* Wait for the adapter to do its thing */ err = atu_wait_completion(sc, CMD_START_IBSS, NULL); if (err) { DPRINTF(("%s: error waiting for start_ibss\n", sc->atu_dev.dv_xname)); return err; } /* Get the current BSSID */ err = atu_get_mib(sc, MIB_MAC_MGMT__CURRENT_BSSID, sc->atu_bssid); if (err) { DPRINTF(("%s: could not get BSSID!\n", sc->atu_dev.dv_xname)); return err; } DPRINTF(("%s: started a new IBSS (BSSID=%s)\n", sc->atu_dev.dv_xname, ether_sprintf(sc->atu_bssid))); return 0; } #endif int atu_start_scan(struct atu_softc *sc) { struct ieee80211com *ic = &sc->sc_ic; struct atu_cmd_do_scan Scan; usbd_status err; int Cnt; memset(&Scan, 0, sizeof(Scan)); Scan.Cmd = CMD_START_SCAN; Scan.Reserved = 0; USETW(Scan.Size, sizeof(Scan) - 4); /* use the broadcast BSSID (in active scan) */ for (Cnt=0; Cnt<6; Cnt++) Scan.BSSID[Cnt] = 0xff; memcpy(Scan.SSID, ic->ic_des_essid, ic->ic_des_esslen); Scan.SSID_Len = ic->ic_des_esslen; /* default values for scan */ Scan.ScanType = ATU_SCAN_ACTIVE; if (sc->atu_desired_channel != IEEE80211_CHAN_ANY) Scan.Channel = (u_int8_t)sc->atu_desired_channel; else Scan.Channel = sc->atu_channel; /* we like scans to be quick :) */ /* the time we wait before sending probe's */ USETW(Scan.ProbeDelay, 0); /* the time we stay on one channel */ USETW(Scan.MinChannelTime, 100); USETW(Scan.MaxChannelTime, 200); /* whether or not we scan all channels */ Scan.InternationalScan = 0xc1; #ifdef ATU_DEBUG if (atudebug) { DPRINTFN(20, ("%s: scan cmd len=%02x\n", sc->atu_dev.dv_xname, sizeof(Scan))); DPRINTFN(20, ("%s: scan cmd: %52D\n", sc->atu_dev.dv_xname, (u_int8_t *)&Scan, " ")); } #endif /* ATU_DEBUG */ /* Write config to adapter */ err = atu_send_command(sc, (u_int8_t *)&Scan, sizeof(Scan)); if (err) return err; /* * We don't wait for the command to finish... the mgmt-thread will do * that for us */ /* err = atu_wait_completion(sc, CMD_START_SCAN, NULL); if (err) return err; */ return 0; } int atu_switch_radio(struct atu_softc *sc, int state) { usbd_status err; struct atu_cmd CmdRadio; if (sc->atu_radio == RadioIntersil) { /* * Intersil doesn't seem to need/support switching the radio * on/off */ return 0; } memset(&CmdRadio, 0, sizeof(CmdRadio)); CmdRadio.Cmd = CMD_RADIO_ON; if (sc->atu_radio_on != state) { if (state == 0) CmdRadio.Cmd = CMD_RADIO_OFF; err = atu_send_command(sc, (u_int8_t *)&CmdRadio, sizeof(CmdRadio)); if (err) return err; err = atu_wait_completion(sc, CmdRadio.Cmd, NULL); if (err) return err; DPRINTFN(10, ("%s: radio turned %s\n", sc->atu_dev.dv_xname, state ? "on" : "off")); sc->atu_radio_on = state; } return 0; } int atu_initial_config(struct atu_softc *sc) { struct ieee80211com *ic = &sc->sc_ic; u_int32_t i; usbd_status err; /* u_int8_t rates[4] = {0x82, 0x84, 0x8B, 0x96};*/ u_int8_t rates[4] = {0x82, 0x04, 0x0B, 0x16}; struct atu_cmd_card_config cmd; u_int8_t reg_domain; DPRINTFN(10, ("%s: sending mac-addr\n", sc->atu_dev.dv_xname)); err = atu_send_mib(sc, MIB_MAC_ADDR__ADDR, ic->ic_myaddr); if (err) { DPRINTF(("%s: error setting mac-addr\n", sc->atu_dev.dv_xname)); return err; } /* DPRINTF(("%s: sending reg-domain\n", sc->atu_dev.dv_xname)); err = atu_send_mib(sc, MIB_PHY__REG_DOMAIN, NR(0x30)); if (err) { DPRINTF(("%s: error setting mac-addr\n", sc->atu_dev.dv_xname)); return err; } */ memset(&cmd, 0, sizeof(cmd)); cmd.Cmd = CMD_STARTUP; cmd.Reserved = 0; USETW(cmd.Size, sizeof(cmd) - 4); if (sc->atu_desired_channel != IEEE80211_CHAN_ANY) cmd.Channel = (u_int8_t)sc->atu_desired_channel; else cmd.Channel = sc->atu_channel; cmd.AutoRateFallback = 1; memcpy(cmd.BasicRateSet, rates, 4); /* ShortRetryLimit should be 7 according to 802.11 spec */ cmd.ShortRetryLimit = 7; USETW(cmd.RTS_Threshold, 2347); USETW(cmd.FragThreshold, 2346); /* Doesn't seem to work, but we'll set it to 1 anyway */ cmd.PromiscuousMode = 1; /* this goes into the beacon we transmit */ cmd.PrivacyInvoked = (ic->ic_flags & IEEE80211_F_WEPON) ? 1 : 0; cmd.ExcludeUnencrypted = 0; switch (ic->ic_nw_keys[ic->ic_wep_txkey].k_cipher) { case IEEE80211_CIPHER_WEP40: cmd.EncryptionType = ATU_WEP_40BITS; break; case IEEE80211_CIPHER_WEP104: cmd.EncryptionType = ATU_WEP_104BITS; break; default: cmd.EncryptionType = ATU_WEP_OFF; break; } cmd.WEP_DefaultKeyID = ic->ic_wep_txkey; for (i = 0; i < IEEE80211_WEP_NKID; i++) { memcpy(cmd.WEP_DefaultKey[i], ic->ic_nw_keys[i].k_key, ic->ic_nw_keys[i].k_len); } /* Setting the SSID here doesn't seem to do anything */ memcpy(cmd.SSID, ic->ic_des_essid, ic->ic_des_esslen); cmd.SSID_Len = ic->ic_des_esslen; cmd.ShortPreamble = 0; USETW(cmd.BeaconPeriod, 100); /* cmd.BeaconPeriod = 65535; */ /* * TODO: * read reg domain MIB_PHY @ 0x17 (1 byte), (reply = 0x30) * we should do something usefull with this info. right now it's just * ignored */ err = atu_get_mib(sc, MIB_PHY__REG_DOMAIN, ®_domain); if (err) { DPRINTF(("%s: could not get regdomain!\n", sc->atu_dev.dv_xname)); } else { DPRINTF(("%s: we're in reg domain 0x%x according to the " "adapter\n", sc->atu_dev.dv_xname, reg_domain)); } #ifdef ATU_DEBUG if (atudebug) { DPRINTFN(20, ("%s: configlen=%02x\n", sc->atu_dev.dv_xname, sizeof(cmd))); DPRINTFN(20, ("%s: configdata= %108D\n", sc->atu_dev.dv_xname, (u_int8_t *)&cmd, " ")); } #endif /* ATU_DEBUG */ /* Windoze : driver says exclude-unencrypted=1 & encr-type=1 */ err = atu_send_command(sc, (u_int8_t *)&cmd, sizeof(cmd)); if (err) return err; err = atu_wait_completion(sc, CMD_STARTUP, NULL); if (err) return err; /* Turn on radio now */ err = atu_switch_radio(sc, 1); if (err) return err; /* preamble type = short */ err = atu_send_mib(sc, MIB_LOCAL__PREAMBLE, NR(PREAMBLE_SHORT)); if (err) return err; /* frag = 1536 */ err = atu_send_mib(sc, MIB_MAC__FRAG, NR(2346)); if (err) return err; /* rts = 1536 */ err = atu_send_mib(sc, MIB_MAC__RTS, NR(2347)); if (err) return err; /* auto rate fallback = 1 */ err = atu_send_mib(sc, MIB_LOCAL__AUTO_RATE_FALLBACK, NR(1)); if (err) return err; /* power mode = full on, no power saving */ err = atu_send_mib(sc, MIB_MAC_MGMT__POWER_MODE, NR(POWER_MODE_ACTIVE)); if (err) return err; DPRINTFN(10, ("%s: completed initial config\n", sc->atu_dev.dv_xname)); return 0; } int atu_join(struct atu_softc *sc, struct ieee80211_node *node) { struct atu_cmd_join join; u_int8_t status; usbd_status err; memset(&join, 0, sizeof(join)); join.Cmd = CMD_JOIN; join.Reserved = 0x00; USETW(join.Size, sizeof(join) - 4); DPRINTFN(15, ("%s: pre-join sc->atu_bssid=%s\n", sc->atu_dev.dv_xname, ether_sprintf(sc->atu_bssid))); DPRINTFN(15, ("%s: mode=%d\n", sc->atu_dev.dv_xname, sc->atu_mode)); memcpy(join.bssid, node->ni_bssid, IEEE80211_ADDR_LEN); memcpy(join.essid, node->ni_essid, node->ni_esslen); join.essid_size = node->ni_esslen; if (node->ni_capinfo & IEEE80211_CAPINFO_IBSS) join.bss_type = AD_HOC_MODE; else join.bss_type = INFRASTRUCTURE_MODE; join.channel = ieee80211_chan2ieee(&sc->sc_ic, node->ni_chan); USETW(join.timeout, ATU_JOIN_TIMEOUT); join.reserved = 0x00; DPRINTFN(10, ("%s: trying to join BSSID=%s\n", sc->atu_dev.dv_xname, ether_sprintf(join.bssid))); err = atu_send_command(sc, (u_int8_t *)&join, sizeof(join)); if (err) { DPRINTF(("%s: ERROR trying to join IBSS\n", sc->atu_dev.dv_xname)); return err; } err = atu_wait_completion(sc, CMD_JOIN, &status); if (err) { DPRINTF(("%s: error joining BSS!\n", sc->atu_dev.dv_xname)); return err; } if (status != STATUS_COMPLETE) { DPRINTF(("%s: error joining... [status=%02x]\n", sc->atu_dev.dv_xname, status)); return status; } else { DPRINTFN(10, ("%s: joined BSS\n", sc->atu_dev.dv_xname)); } return err; } /* * Get the state of the DFU unit */ int8_t atu_get_dfu_state(struct atu_softc *sc) { u_int8_t state; if (atu_usb_request(sc, DFU_GETSTATE, 0, 0, 1, &state)) return -1; return state; } /* * Get MAC opmode */ u_int8_t atu_get_opmode(struct atu_softc *sc, u_int8_t *mode) { return atu_usb_request(sc, UT_READ_VENDOR_INTERFACE, 0x33, 0x0001, 0x0000, 1, mode); } /* * Upload the internal firmware into the device */ void atu_internal_firmware(void *arg) { struct atu_softc *sc = arg; u_char state, *ptr = NULL, *firm = NULL, status[6]; int block_size, block = 0, err, i; size_t bytes_left = 0; char *name = "unknown-device"; /* * Uploading firmware is done with the DFU (Device Firmware Upgrade) * interface. See "Universal Serial Bus - Device Class Specification * for Device Firmware Upgrade" pdf for details of the protocol. * Maybe this could be moved to a seperate 'firmware driver' once more * device drivers need it... For now we'll just do it here. * * Just for your information, the Atmel's DFU descriptor looks like * this: * * 07 size * 21 type * 01 capabilities : only firmware download, need reset * after download * 13 05 detach timeout : max 1299ms between DFU_DETACH and * reset * 00 04 max bytes of firmware per transaction : 1024 */ /* Choose the right firmware for the device */ for (i = 0; i < sizeof(atu_radfirm)/sizeof(atu_radfirm[0]); i++) if (sc->atu_radio == atu_radfirm[i].atur_type) name = atu_radfirm[i].atur_internal; DPRINTF(("%s: loading firmware %s...\n", sc->atu_dev.dv_xname, name)); err = loadfirmware(name, &firm, &bytes_left); if (err != 0) { printf("%s: %s loadfirmware error %d\n", sc->atu_dev.dv_xname, name, err); return; } ptr = firm; state = atu_get_dfu_state(sc); while (block >= 0 && state > 0) { switch (state) { case DFUState_DnLoadSync: /* get DFU status */ err = atu_usb_request(sc, DFU_GETSTATUS, 0, 0 , 6, status); if (err) { DPRINTF(("%s: dfu_getstatus failed!\n", sc->atu_dev.dv_xname)); free(firm, M_DEVBUF); return; } /* success means state => DnLoadIdle */ state = DFUState_DnLoadIdle; continue; break; case DFUState_DFUIdle: case DFUState_DnLoadIdle: if (bytes_left>=DFU_MaxBlockSize) block_size = DFU_MaxBlockSize; else block_size = bytes_left; DPRINTFN(15, ("%s: firmware block %d\n", sc->atu_dev.dv_xname, block)); err = atu_usb_request(sc, DFU_DNLOAD, block++, 0, block_size, ptr); if (err) { DPRINTF(("%s: dfu_dnload failed\n", sc->atu_dev.dv_xname)); free(firm, M_DEVBUF); return; } ptr += block_size; bytes_left -= block_size; if (block_size == 0) block = -1; break; default: DPRINTFN(20, ("%s: sleeping for a while\n", sc->atu_dev.dv_xname)); usbd_delay_ms(sc->atu_udev, 100); break; } state = atu_get_dfu_state(sc); } free(firm, M_DEVBUF); if (state != DFUState_ManifestSync) { DPRINTF(("%s: state != manifestsync... eek!\n", sc->atu_dev.dv_xname)); } err = atu_usb_request(sc, DFU_GETSTATUS, 0, 0, 6, status); if (err) { DPRINTF(("%s: dfu_getstatus failed!\n", sc->atu_dev.dv_xname)); return; } DPRINTFN(15, ("%s: sending remap\n", sc->atu_dev.dv_xname)); err = atu_usb_request(sc, DFU_REMAP, 0, 0, 0, NULL); if ((err) && (!ISSET(sc->atu_quirk, ATU_QUIRK_NO_REMAP))) { DPRINTF(("%s: remap failed!\n", sc->atu_dev.dv_xname)); return; } /* after a lot of trying and measuring I found out the device needs * about 56 miliseconds after sending the remap command before * it's ready to communicate again. So we'll wait just a little bit * longer than that to be sure... */ usbd_delay_ms(sc->atu_udev, 56+100); printf("%s: reattaching after firmware upload\n", sc->atu_dev.dv_xname); usb_needs_reattach(sc->atu_udev); } void atu_external_firmware(void *arg) { struct atu_softc *sc = arg; u_char *ptr = NULL, *firm = NULL; int block_size, block = 0, err, i; size_t bytes_left = 0; char *name = "unknown-device"; for (i = 0; i < sizeof(atu_radfirm)/sizeof(atu_radfirm[0]); i++) if (sc->atu_radio == atu_radfirm[i].atur_type) name = atu_radfirm[i].atur_external; DPRINTF(("%s: loading external firmware %s\n", sc->atu_dev.dv_xname, name)); err = loadfirmware(name, &firm, &bytes_left); if (err != 0) { printf("%s: %s loadfirmware error %d\n", sc->atu_dev.dv_xname, name, err); return; } ptr = firm; while (bytes_left) { if (bytes_left > 1024) block_size = 1024; else block_size = bytes_left; DPRINTFN(15, ("%s: block:%d size:%d\n", sc->atu_dev.dv_xname, block, block_size)); err = atu_usb_request(sc, UT_WRITE_VENDOR_DEVICE, 0x0e, 0x0802, block, block_size, ptr); if (err) { DPRINTF(("%s: could not load external firmware " "block\n", sc->atu_dev.dv_xname)); free(firm, M_DEVBUF); return; } ptr += block_size; block++; bytes_left -= block_size; } free(firm, M_DEVBUF); err = atu_usb_request(sc, UT_WRITE_VENDOR_DEVICE, 0x0e, 0x0802, block, 0, NULL); if (err) { DPRINTF(("%s: could not load last zero-length firmware " "block\n", sc->atu_dev.dv_xname)); return; } /* * The SMC2662w V.4 seems to require some time to do its thing with * the external firmware... 20 ms isn't enough, but 21 ms works 100 * times out of 100 tries. We'll wait a bit longer just to be sure */ if (sc->atu_quirk & ATU_QUIRK_FW_DELAY) usbd_delay_ms(sc->atu_udev, 21 + 100); DPRINTFN(10, ("%s: external firmware upload done\n", sc->atu_dev.dv_xname)); /* complete configuration after the firmwares have been uploaded */ atu_complete_attach(sc); } int atu_get_card_config(struct atu_softc *sc) { struct ieee80211com *ic = &sc->sc_ic; struct atu_rfmd_conf rfmd_conf; struct atu_intersil_conf intersil_conf; int err; switch (sc->atu_radio) { case RadioRFMD: case RadioRFMD2958: case RadioRFMD2958_SMC: case AT76C503_rfmd_acc: case AT76C505_rfmd: err = atu_usb_request(sc, UT_READ_VENDOR_INTERFACE, 0x33, 0x0a02, 0x0000, sizeof(rfmd_conf), (u_int8_t *)&rfmd_conf); if (err) { DPRINTF(("%s: could not get rfmd config!\n", sc->atu_dev.dv_xname)); return err; } memcpy(ic->ic_myaddr, rfmd_conf.MACAddr, IEEE80211_ADDR_LEN); break; case RadioIntersil: case AT76C503_i3863: err = atu_usb_request(sc, UT_READ_VENDOR_INTERFACE, 0x33, 0x0902, 0x0000, sizeof(intersil_conf), (u_int8_t *)&intersil_conf); if (err) { DPRINTF(("%s: could not get intersil config!\n", sc->atu_dev.dv_xname)); return err; } memcpy(ic->ic_myaddr, intersil_conf.MACAddr, IEEE80211_ADDR_LEN); break; } return 0; } /* * Probe for an AT76c503 chip. */ int atu_match(struct device *parent, void *match, void *aux) { struct usb_attach_arg *uaa = aux; int i; if (!uaa->iface) return(UMATCH_NONE); for (i = 0; i < sizeof(atu_devs)/sizeof(atu_devs[0]); i++) { struct atu_type *t = &atu_devs[i]; if (uaa->vendor == t->atu_vid && uaa->product == t->atu_pid) { return(UMATCH_VENDOR_PRODUCT); } } return(UMATCH_NONE); } int atu_media_change(struct ifnet *ifp) { #ifdef ATU_DEBUG struct atu_softc *sc = ifp->if_softc; #endif /* ATU_DEBUG */ int err; DPRINTFN(10, ("%s: atu_media_change\n", sc->atu_dev.dv_xname)); err = ieee80211_media_change(ifp); if (err == ENETRESET) { if ((ifp->if_flags & (IFF_RUNNING|IFF_UP)) == (IFF_RUNNING|IFF_UP)) atu_init(ifp); err = 0; } return (err); } void atu_media_status(struct ifnet *ifp, struct ifmediareq *req) { #ifdef ATU_DEBUG struct atu_softc *sc = ifp->if_softc; #endif /* ATU_DEBUG */ DPRINTFN(10, ("%s: atu_media_status\n", sc->atu_dev.dv_xname)); ieee80211_media_status(ifp, req); } void atu_task(void *arg) { struct atu_softc *sc = (struct atu_softc *)arg; struct ieee80211com *ic = &sc->sc_ic; struct ifnet *ifp = &ic->ic_if; usbd_status err; int s; DPRINTFN(10, ("%s: atu_task\n", sc->atu_dev.dv_xname)); if (sc->sc_state != ATU_S_OK) return; switch (sc->sc_cmd) { case ATU_C_SCAN: err = atu_start_scan(sc); if (err) { DPRINTFN(1, ("%s: atu_init: couldn't start scan!\n", sc->atu_dev.dv_xname)); return; } err = atu_wait_completion(sc, CMD_START_SCAN, NULL); if (err) { DPRINTF(("%s: atu_init: error waiting for scan\n", sc->atu_dev.dv_xname)); return; } DPRINTF(("%s: ==========================> END OF SCAN!\n", sc->atu_dev.dv_xname)); s = splnet(); /* ieee80211_next_scan(ifp); */ ieee80211_end_scan(ifp); splx(s); DPRINTF(("%s: ----------------------======> END OF SCAN2!\n", sc->atu_dev.dv_xname)); break; case ATU_C_JOIN: atu_join(sc, ic->ic_bss); } } int atu_newstate(struct ieee80211com *ic, enum ieee80211_state nstate, int arg) { struct ifnet *ifp = &ic->ic_if; struct atu_softc *sc = ifp->if_softc; enum ieee80211_state ostate = ic->ic_state; DPRINTFN(10, ("%s: atu_newstate: %s -> %s\n", sc->atu_dev.dv_xname, ieee80211_state_name[ostate], ieee80211_state_name[nstate])); switch (nstate) { case IEEE80211_S_SCAN: memcpy(ic->ic_chan_scan, ic->ic_chan_active, sizeof(ic->ic_chan_active)); ieee80211_free_allnodes(ic); /* tell the event thread that we want a scan */ sc->sc_cmd = ATU_C_SCAN; usb_add_task(sc->atu_udev, &sc->sc_task); /* handle this ourselves */ ic->ic_state = nstate; return (0); case IEEE80211_S_AUTH: case IEEE80211_S_RUN: if (ostate == IEEE80211_S_SCAN) { sc->sc_cmd = ATU_C_JOIN; usb_add_task(sc->atu_udev, &sc->sc_task); } break; default: /* nothing to do */ break; } return (*sc->sc_newstate)(ic, nstate, arg); } /* * Attach the interface. Allocate softc structures, do * setup and ethernet/BPF attach. */ void atu_attach(struct device *parent, struct device *self, void *aux) { struct atu_softc *sc = (struct atu_softc *)self; struct usb_attach_arg *uaa = aux; char *devinfop; usbd_status err; usbd_device_handle dev = uaa->device; u_int8_t mode, channel; int i; sc->sc_state = ATU_S_UNCONFIG; devinfop = usbd_devinfo_alloc(dev, 0); printf("\n%s: %s", sc->atu_dev.dv_xname, devinfop); usbd_devinfo_free(devinfop); err = usbd_set_config_no(dev, ATU_CONFIG_NO, 1); if (err) { printf("%s: setting config no failed\n", sc->atu_dev.dv_xname); return; } err = usbd_device2interface_handle(dev, ATU_IFACE_IDX, &sc->atu_iface); if (err) { printf("%s: getting interface handle failed\n", sc->atu_dev.dv_xname); return; } sc->atu_unit = self->dv_unit; sc->atu_udev = dev; /* * look up the radio_type for the device * basically does the same as USB_MATCH */ for (i = 0; i < sizeof(atu_devs)/sizeof(atu_devs[0]); i++) { struct atu_type *t = &atu_devs[i]; if (uaa->vendor == t->atu_vid && uaa->product == t->atu_pid) { sc->atu_radio = t->atu_radio; sc->atu_quirk = t->atu_quirk; } } /* * Check in the interface descriptor if we're in DFU mode * If we're in DFU mode, we upload the external firmware * If we're not, the PC must have rebooted without power-cycling * the device.. I've tried this out, a reboot only requeres the * external firmware to be reloaded :) * * Hmm. The at76c505a doesn't report a DFU descriptor when it's * in DFU mode... Let's just try to get the opmode */ err = atu_get_opmode(sc, &mode); DPRINTFN(20, ("%s: opmode: %d\n", sc->atu_dev.dv_xname, mode)); if (err || (mode != MODE_NETCARD && mode != MODE_NOFLASHNETCARD)) { DPRINTF(("%s: starting internal firmware download\n", sc->atu_dev.dv_xname)); printf("\n"); if (rootvp == NULL) mountroothook_establish(atu_internal_firmware, sc); else atu_internal_firmware(sc); /* * atu_internal_firmware will cause a reset of the device * so we don't want to do any more configuration after this * point. */ return; } uaa->iface = sc->atu_iface; if (mode != MODE_NETCARD) { DPRINTFN(15, ("%s: device needs external firmware\n", sc->atu_dev.dv_xname)); if (mode != MODE_NOFLASHNETCARD) { DPRINTF(("%s: EEK! unexpected opmode=%d\n", sc->atu_dev.dv_xname, mode)); } /* * There is no difference in opmode before and after external * firmware upload with the SMC2662 V.4 . So instead we'll try * to read the channel number. If we succeed, external * firmwaremust have been already uploaded... */ if (sc->atu_radio != RadioIntersil) { err = atu_get_mib(sc, MIB_PHY__CHANNEL, &channel); if (!err) { DPRINTF(("%s: external firmware has already" " been downloaded\n", sc->atu_dev.dv_xname)); atu_complete_attach(sc); return; } } if (rootvp == NULL) mountroothook_establish(atu_external_firmware, sc); else atu_external_firmware(sc); /* * atu_external_firmware will call atu_complete_attach after * it's finished so we can just return. */ } else { /* all the firmwares are in place, so complete the attach */ atu_complete_attach(sc); } } void atu_complete_attach(struct atu_softc *sc) { struct ieee80211com *ic = &sc->sc_ic; struct ifnet *ifp = &ic->ic_if; usb_interface_descriptor_t *id; usb_endpoint_descriptor_t *ed; usbd_status err; int i; #ifdef ATU_DEBUG struct atu_fw fw; #endif id = usbd_get_interface_descriptor(sc->atu_iface); /* Find endpoints. */ for (i = 0; i < id->bNumEndpoints; i++) { ed = usbd_interface2endpoint_descriptor(sc->atu_iface, i); if (!ed) { DPRINTF(("%s: num_endp:%d\n", sc->atu_dev.dv_xname, sc->atu_iface->idesc->bNumEndpoints)); DPRINTF(("%s: couldn't get ep %d\n", sc->atu_dev.dv_xname, i)); return; } if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_IN && UE_GET_XFERTYPE(ed->bmAttributes) == UE_BULK) { sc->atu_ed[ATU_ENDPT_RX] = ed->bEndpointAddress; } else if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_OUT && UE_GET_XFERTYPE(ed->bmAttributes) == UE_BULK) { sc->atu_ed[ATU_ENDPT_TX] = ed->bEndpointAddress; } } /* read device config & get MAC address */ err = atu_get_card_config(sc); if (err) { printf("\n%s: could not get card cfg!\n", sc->atu_dev.dv_xname); return; } #ifdef ATU_DEBUG /* DEBUG : try to get firmware version */ err = atu_get_mib(sc, MIB_FW_VERSION, sizeof(fw), 0, (u_int8_t *)&fw); if (!err) { DPRINTFN(15, ("%s: firmware: maj:%d min:%d patch:%d " "build:%d\n", sc->atu_dev.dv_xname, fw.major, fw.minor, fw.patch, fw.build)); } else { DPRINTF(("%s: get firmware version failed\n", sc->atu_dev.dv_xname)); } #endif /* ATU_DEBUG */ /* Show the world our MAC address */ printf(", address %s\n", ether_sprintf(ic->ic_myaddr)); sc->atu_cdata.atu_tx_inuse = 0; bzero(sc->atu_bssid, ETHER_ADDR_LEN); sc->atu_channel = ATU_DEFAULT_CHANNEL; sc->atu_desired_channel = IEEE80211_CHAN_ANY; sc->atu_mode = INFRASTRUCTURE_MODE; ic->ic_softc = sc; ic->ic_phytype = IEEE80211_T_DS; ic->ic_opmode = IEEE80211_M_STA; ic->ic_state = IEEE80211_S_INIT; ic->ic_caps = IEEE80211_C_IBSS | IEEE80211_C_WEP | IEEE80211_C_SCANALL; ic->ic_max_rssi = atu_radfirm[sc->atu_radio].max_rssi; ic->ic_sup_rates[IEEE80211_MODE_11B] = ieee80211_std_rateset_11b; for (i = 1; i <= 14; i++) { ic->ic_channels[i].ic_flags = IEEE80211_CHAN_B | IEEE80211_CHAN_PASSIVE; ic->ic_channels[i].ic_freq = ieee80211_ieee2mhz(i, ic->ic_channels[i].ic_flags); } ic->ic_ibss_chan = &ic->ic_channels[0]; ifp->if_softc = sc; memcpy(ifp->if_xname, sc->atu_dev.dv_xname, IFNAMSIZ); ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST; ifp->if_start = atu_start; ifp->if_ioctl = atu_ioctl; ifp->if_watchdog = atu_watchdog; ifp->if_mtu = ATU_DEFAULT_MTU; IFQ_SET_READY(&ifp->if_snd); /* Call MI attach routine. */ if_attach(ifp); ieee80211_ifattach(ifp); sc->sc_newstate = ic->ic_newstate; ic->ic_newstate = atu_newstate; /* setup ifmedia interface */ ieee80211_media_init(ifp, atu_media_change, atu_media_status); usb_init_task(&sc->sc_task, atu_task, sc); #if NBPFILTER > 0 bpfattach(&sc->sc_radiobpf, &sc->sc_ic.ic_if, DLT_IEEE802_11_RADIO, sizeof(struct ieee80211_frame) + 64); bzero(&sc->sc_rxtapu, sizeof(sc->sc_rxtapu)); sc->sc_rxtap.rr_ihdr.it_len = sizeof(sc->sc_rxtapu); sc->sc_rxtap.rr_ihdr.it_present = htole32(ATU_RX_RADIOTAP_PRESENT); bzero(&sc->sc_txtapu, sizeof(sc->sc_txtapu)); sc->sc_txtap.rt_ihdr.it_len = sizeof(sc->sc_txtapu); sc->sc_txtap.rt_ihdr.it_present = htole32(ATU_TX_RADIOTAP_PRESENT); #endif sc->sc_state = ATU_S_OK; } int atu_detach(struct device *self, int flags) { struct atu_softc *sc = (struct atu_softc *)self; struct ifnet *ifp = &sc->sc_ic.ic_if; DPRINTFN(10, ("%s: atu_detach state=%d\n", sc->atu_dev.dv_xname, sc->sc_state)); if (sc->sc_state != ATU_S_UNCONFIG) { atu_stop(ifp, 1); ieee80211_ifdetach(ifp); if_detach(ifp); if (sc->atu_ep[ATU_ENDPT_TX] != NULL) usbd_abort_pipe(sc->atu_ep[ATU_ENDPT_TX]); if (sc->atu_ep[ATU_ENDPT_RX] != NULL) usbd_abort_pipe(sc->atu_ep[ATU_ENDPT_RX]); usb_rem_task(sc->atu_udev, &sc->sc_task); } return(0); } int atu_activate(struct device *self, enum devact act) { struct atu_softc *sc = (struct atu_softc *)self; switch (act) { case DVACT_ACTIVATE: break; case DVACT_DEACTIVATE: if (sc->sc_state != ATU_S_UNCONFIG) sc->sc_state = ATU_S_DEAD; break; } return (0); } /* * Initialize an RX descriptor and attach an MBUF cluster. */ int atu_newbuf(struct atu_softc *sc, struct atu_chain *c, struct mbuf *m) { struct mbuf *m_new = NULL; if (m == NULL) { MGETHDR(m_new, M_DONTWAIT, MT_DATA); if (m_new == NULL) { DPRINTF(("%s: no memory for rx list\n", sc->atu_dev.dv_xname)); return(ENOBUFS); } MCLGET(m_new, M_DONTWAIT); if (!(m_new->m_flags & M_EXT)) { DPRINTF(("%s: no memory for rx list\n", sc->atu_dev.dv_xname)); m_freem(m_new); return(ENOBUFS); } m_new->m_len = m_new->m_pkthdr.len = MCLBYTES; } else { m_new = m; m_new->m_len = m_new->m_pkthdr.len = MCLBYTES; m_new->m_data = m_new->m_ext.ext_buf; } c->atu_mbuf = m_new; return(0); } int atu_rx_list_init(struct atu_softc *sc) { struct atu_cdata *cd = &sc->atu_cdata; struct atu_chain *c; int i; DPRINTFN(15, ("%s: atu_rx_list_init: enter\n", sc->atu_dev.dv_xname)); for (i = 0; i < ATU_RX_LIST_CNT; i++) { c = &cd->atu_rx_chain[i]; c->atu_sc = sc; c->atu_idx = i; if (c->atu_xfer == NULL) { c->atu_xfer = usbd_alloc_xfer(sc->atu_udev); if (c->atu_xfer == NULL) return (ENOBUFS); c->atu_buf = usbd_alloc_buffer(c->atu_xfer, ATU_RX_BUFSZ); if (c->atu_buf == NULL) /* XXX free xfer */ return (ENOBUFS); if (atu_newbuf(sc, c, NULL) == ENOBUFS) /* XXX free? */ return(ENOBUFS); } } return (0); } int atu_tx_list_init(struct atu_softc *sc) { struct atu_cdata *cd = &sc->atu_cdata; struct atu_chain *c; int i; DPRINTFN(15, ("%s: atu_tx_list_init\n", sc->atu_dev.dv_xname)); SLIST_INIT(&cd->atu_tx_free); sc->atu_cdata.atu_tx_inuse = 0; for (i = 0; i < ATU_TX_LIST_CNT; i++) { c = &cd->atu_tx_chain[i]; c->atu_sc = sc; c->atu_idx = i; if (c->atu_xfer == NULL) { c->atu_xfer = usbd_alloc_xfer(sc->atu_udev); if (c->atu_xfer == NULL) return(ENOBUFS); c->atu_mbuf = NULL; c->atu_buf = usbd_alloc_buffer(c->atu_xfer, ATU_TX_BUFSZ); if (c->atu_buf == NULL) return(ENOBUFS); /* XXX free xfer */ SLIST_INSERT_HEAD(&cd->atu_tx_free, c, atu_list); } } return(0); } void atu_xfer_list_free(struct atu_softc *sc, struct atu_chain *ch, int listlen) { int i; /* Free resources. */ for (i = 0; i < listlen; i++) { if (ch[i].atu_buf != NULL) ch[i].atu_buf = NULL; if (ch[i].atu_mbuf != NULL) { m_freem(ch[i].atu_mbuf); ch[i].atu_mbuf = NULL; } if (ch[i].atu_xfer != NULL) { usbd_free_xfer(ch[i].atu_xfer); ch[i].atu_xfer = NULL; } } } /* * A frame has been uploaded: pass the resulting mbuf chain up to * the higher level protocols. */ void atu_rxeof(usbd_xfer_handle xfer, usbd_private_handle priv, usbd_status status) { struct atu_chain *c = (struct atu_chain *)priv; struct atu_softc *sc = c->atu_sc; struct ieee80211com *ic = &sc->sc_ic; struct ifnet *ifp = &ic->ic_if; struct atu_rx_hdr *h; struct ieee80211_frame *wh; struct ieee80211_node *ni; struct mbuf *m; u_int32_t len; int s; DPRINTFN(25, ("%s: atu_rxeof\n", sc->atu_dev.dv_xname)); if (sc->sc_state != ATU_S_OK) return; if ((ifp->if_flags & (IFF_RUNNING|IFF_UP)) != (IFF_RUNNING|IFF_UP)) goto done; if (status != USBD_NORMAL_COMPLETION) { DPRINTF(("%s: status != USBD_NORMAL_COMPLETION\n", sc->atu_dev.dv_xname)); if (status == USBD_NOT_STARTED || status == USBD_CANCELLED) { return; } #if 0 if (status == USBD_IOERROR) { DPRINTF(("%s: rx: EEK! lost device?\n", sc->atu_dev.dv_xname)); /* * My experience with USBD_IOERROR is that trying to * restart the transfer will always fail and we'll * keep on looping restarting transfers untill someone * pulls the plug of the device. * So we don't restart the transfer, but just let it * die... If someone knows of a situation where we can * recover from USBD_IOERROR, let me know. */ splx(s); return; } #endif /* 0 */ if (usbd_ratecheck(&sc->atu_rx_notice)) { DPRINTF(("%s: usb error on rx: %s\n", sc->atu_dev.dv_xname, usbd_errstr(status))); } if (status == USBD_STALLED) usbd_clear_endpoint_stall_async( sc->atu_ep[ATU_ENDPT_RX]); goto done; } usbd_get_xfer_status(xfer, NULL, NULL, &len, NULL); if (len <= 1) { DPRINTF(("%s: atu_rxeof: too short\n", sc->atu_dev.dv_xname)); goto done; } h = (struct atu_rx_hdr *)c->atu_buf; len = UGETW(h->length) - 4; /* XXX magic number */ m = c->atu_mbuf; memcpy(mtod(m, char *), c->atu_buf + ATU_RX_HDRLEN, len); m->m_pkthdr.rcvif = ifp; m->m_pkthdr.len = m->m_len = len; wh = mtod(m, struct ieee80211_frame *); ni = ieee80211_find_rxnode(ic, wh); ifp->if_ipackets++; s = splnet(); if (atu_newbuf(sc, c, NULL) == ENOBUFS) { ifp->if_ierrors++; goto done1; /* XXX if we can't allocate, why restart it? */ } #if NBPFILTER > 0 if (sc->sc_radiobpf != NULL) { struct mbuf mb; struct atu_rx_radiotap_header *rr = &sc->sc_rxtap; rr->rr_flags = 0; rr->rr_chan_freq = htole16(ic->ic_bss->ni_chan->ic_freq); rr->rr_chan_flags = htole16(ic->ic_bss->ni_chan->ic_flags); rr->rr_rssi = h->rssi; rr->rr_max_rssi = ic->ic_max_rssi; mb.m_data = (caddr_t)rr; mb.m_len = sizeof(sc->sc_txtapu); mb.m_next = m; mb.m_nextpkt = NULL; mb.m_type = 0; mb.m_flags = 0; bpf_mtap(sc->sc_radiobpf, &mb, BPF_DIRECTION_IN); } #endif /* NPBFILTER > 0 */ if (wh->i_fc[1] & IEEE80211_FC1_WEP) { /* * WEP is decrypted by hardware. Clear WEP bit * header for ieee80211_input(). */ wh->i_fc[1] &= ~IEEE80211_FC1_WEP; } ieee80211_input(ifp, m, ni, h->rssi, UGETDW(h->rx_time)); ieee80211_release_node(ic, ni); done1: splx(s); done: /* Setup new transfer. */ usbd_setup_xfer(c->atu_xfer, sc->atu_ep[ATU_ENDPT_RX], c, c->atu_buf, ATU_RX_BUFSZ, USBD_SHORT_XFER_OK | USBD_NO_COPY, USBD_NO_TIMEOUT, atu_rxeof); usbd_transfer(c->atu_xfer); } /* * A frame was downloaded to the chip. It's safe for us to clean up * the list buffers. */ void atu_txeof(usbd_xfer_handle xfer, usbd_private_handle priv, usbd_status status) { struct atu_chain *c = (struct atu_chain *)priv; struct atu_softc *sc = c->atu_sc; struct ifnet *ifp = &sc->sc_ic.ic_if; usbd_status err; int s; DPRINTFN(25, ("%s: atu_txeof status=%d\n", sc->atu_dev.dv_xname, status)); if (c->atu_mbuf != NULL) { m_freem(c->atu_mbuf); c->atu_mbuf = NULL; } if (status != USBD_NORMAL_COMPLETION) { if (status == USBD_NOT_STARTED || status == USBD_CANCELLED) return; DPRINTF(("%s: usb error on tx: %s\n", sc->atu_dev.dv_xname, usbd_errstr(status))); if (status == USBD_STALLED) usbd_clear_endpoint_stall_async(sc->atu_ep[ATU_ENDPT_TX]); return; } usbd_get_xfer_status(c->atu_xfer, NULL, NULL, NULL, &err); if (err) ifp->if_oerrors++; else ifp->if_opackets++; s = splnet(); SLIST_INSERT_HEAD(&sc->atu_cdata.atu_tx_free, c, atu_list); sc->atu_cdata.atu_tx_inuse--; if (sc->atu_cdata.atu_tx_inuse == 0) ifp->if_timer = 0; ifp->if_flags &= ~IFF_OACTIVE; splx(s); atu_start(ifp); } u_int8_t atu_calculate_padding(int size) { size %= 64; if (size < 50) return (50 - size); if (size >=61) return (64 + 50 - size); return (0); } int atu_tx_start(struct atu_softc *sc, struct ieee80211_node *ni, struct atu_chain *c, struct mbuf *m) { int len; struct atu_tx_hdr *h; usbd_status err; u_int8_t pad; #if NBPFILTER > 0 struct ieee80211com *ic = &sc->sc_ic; #endif DPRINTFN(25, ("%s: atu_tx_start\n", sc->atu_dev.dv_xname)); /* Don't try to send when we're shutting down the driver */ if (sc->sc_state != ATU_S_OK) { m_freem(m); return(EIO); } #if NBPFILTER > 0 if (sc->sc_radiobpf != NULL) { struct mbuf mb; struct atu_tx_radiotap_header *rt = &sc->sc_txtap; rt->rt_flags = 0; rt->rt_chan_freq = htole16(ic->ic_bss->ni_chan->ic_freq); rt->rt_chan_flags = htole16(ic->ic_bss->ni_chan->ic_flags); mb.m_data = (caddr_t)rt; mb.m_len = sizeof(sc->sc_txtapu); mb.m_next = m; mb.m_nextpkt = NULL; mb.m_type = 0; mb.m_flags = 0; bpf_mtap(sc->sc_radiobpf, &mb, BPF_DIRECTION_OUT); } #endif /* * Copy the mbuf data into a contiguous buffer, leaving * enough room for the atmel headers */ len = m->m_pkthdr.len; m_copydata(m, 0, m->m_pkthdr.len, c->atu_buf + ATU_TX_HDRLEN); h = (struct atu_tx_hdr *)c->atu_buf; memset(h, 0, ATU_TX_HDRLEN); USETW(h->length, len); h->tx_rate = 4; /* XXX rate = auto */ len += ATU_TX_HDRLEN; pad = atu_calculate_padding(len); len += pad; h->padding = pad; c->atu_length = len; c->atu_mbuf = m; usbd_setup_xfer(c->atu_xfer, sc->atu_ep[ATU_ENDPT_TX], c, c->atu_buf, c->atu_length, USBD_NO_COPY, ATU_TX_TIMEOUT, atu_txeof); /* Let's get this thing into the air! */ c->atu_in_xfer = 1; err = usbd_transfer(c->atu_xfer); if (err != USBD_IN_PROGRESS) { DPRINTFN(25, ("%s: atu_tx_start: err=%d\n", sc->atu_dev.dv_xname, err)); c->atu_mbuf = NULL; m_freem(m); return(EIO); } return (0); } void atu_start(struct ifnet *ifp) { struct atu_softc *sc = ifp->if_softc; struct ieee80211com *ic = &sc->sc_ic; struct atu_cdata *cd = &sc->atu_cdata; struct ieee80211_node *ni; struct ieee80211_frame *wh; struct atu_chain *c; struct mbuf *m = NULL; int s; DPRINTFN(25, ("%s: atu_start: enter\n", sc->atu_dev.dv_xname)); if ((ifp->if_flags & (IFF_RUNNING|IFF_UP)) != (IFF_RUNNING|IFF_UP)) { DPRINTFN(30, ("%s: atu_start: not running or up\n", sc->atu_dev.dv_xname)); return; } if (ifp->if_flags & IFF_OACTIVE) { DPRINTFN(30, ("%s: atu_start: IFF_OACTIVE\n", sc->atu_dev.dv_xname)); return; } for (;;) { /* grab a TX buffer */ s = splnet(); c = SLIST_FIRST(&cd->atu_tx_free); if (c != NULL) { SLIST_REMOVE_HEAD(&cd->atu_tx_free, atu_list); cd->atu_tx_inuse++; if (cd->atu_tx_inuse == ATU_TX_LIST_CNT) ifp->if_flags |= IFF_OACTIVE; } splx(s); if (c == NULL) { DPRINTFN(10, ("%s: out of tx xfers\n", sc->atu_dev.dv_xname)); ifp->if_flags |= IFF_OACTIVE; break; } /* * Poll the management queue for frames, it has priority over * normal data frames. */ IF_DEQUEUE(&ic->ic_mgtq, m); if (m == NULL) { DPRINTFN(10, ("%s: atu_start: data packet\n", sc->atu_dev.dv_xname)); if (ic->ic_state != IEEE80211_S_RUN) { DPRINTFN(25, ("%s: no data till running\n", sc->atu_dev.dv_xname)); /* put the xfer back on the list */ s = splnet(); SLIST_INSERT_HEAD(&cd->atu_tx_free, c, atu_list); cd->atu_tx_inuse--; splx(s); break; } IFQ_DEQUEUE(&ifp->if_snd, m); if (m == NULL) { DPRINTFN(25, ("%s: nothing to send\n", sc->atu_dev.dv_xname)); s = splnet(); SLIST_INSERT_HEAD(&cd->atu_tx_free, c, atu_list); cd->atu_tx_inuse--; splx(s); break; } #if NBPFILTER > 0 if (ifp->if_bpf) bpf_mtap(ifp->if_bpf, m, BPF_DIRECTION_OUT); #endif m = ieee80211_encap(ifp, m, &ni); if (m == NULL) goto bad; wh = mtod(m, struct ieee80211_frame *); #if NBPFILTER > 0 if (ic->ic_rawbpf != NULL) bpf_mtap(ic->ic_rawbpf, m, BPF_DIRECTION_OUT); #endif } else { DPRINTFN(25, ("%s: atu_start: mgmt packet\n", sc->atu_dev.dv_xname)); /* * Hack! The referenced node pointer is in the * rcvif field of the packet header. This is * placed there by ieee80211_mgmt_output because * we need to hold the reference with the frame * and there's no other way (other than packet * tags which we consider too expensive to use) * to pass it along. */ ni = (struct ieee80211_node *)m->m_pkthdr.rcvif; m->m_pkthdr.rcvif = NULL; wh = mtod(m, struct ieee80211_frame *); /* sc->sc_stats.ast_tx_mgmt++; */ } if (atu_tx_start(sc, ni, c, m)) { bad: s = splnet(); SLIST_INSERT_HEAD(&cd->atu_tx_free, c, atu_list); cd->atu_tx_inuse--; splx(s); /* ifp_if_oerrors++; */ if (ni != NULL) ieee80211_release_node(ic, ni); continue; } ifp->if_timer = 5; } } int atu_init(struct ifnet *ifp) { struct atu_softc *sc = ifp->if_softc; struct ieee80211com *ic = &sc->sc_ic; struct atu_chain *c; usbd_status err; int i, s; s = splnet(); DPRINTFN(10, ("%s: atu_init\n", sc->atu_dev.dv_xname)); if (ifp->if_flags & IFF_RUNNING) { splx(s); return(0); } /* Init TX ring */ if (atu_tx_list_init(sc)) printf("%s: tx list init failed\n", sc->atu_dev.dv_xname); /* Init RX ring */ if (atu_rx_list_init(sc)) printf("%s: rx list init failed\n", sc->atu_dev.dv_xname); /* Load the multicast filter. */ /*atu_setmulti(sc); */ /* Open RX and TX pipes. */ err = usbd_open_pipe(sc->atu_iface, sc->atu_ed[ATU_ENDPT_RX], USBD_EXCLUSIVE_USE, &sc->atu_ep[ATU_ENDPT_RX]); if (err) { DPRINTF(("%s: open rx pipe failed: %s\n", sc->atu_dev.dv_xname, usbd_errstr(err))); splx(s); return(EIO); } err = usbd_open_pipe(sc->atu_iface, sc->atu_ed[ATU_ENDPT_TX], USBD_EXCLUSIVE_USE, &sc->atu_ep[ATU_ENDPT_TX]); if (err) { DPRINTF(("%s: open tx pipe failed: %s\n", sc->atu_dev.dv_xname, usbd_errstr(err))); splx(s); return(EIO); } /* Start up the receive pipe. */ for (i = 0; i < ATU_RX_LIST_CNT; i++) { c = &sc->atu_cdata.atu_rx_chain[i]; usbd_setup_xfer(c->atu_xfer, sc->atu_ep[ATU_ENDPT_RX], c, c->atu_buf, ATU_RX_BUFSZ, USBD_SHORT_XFER_OK | USBD_NO_COPY, USBD_NO_TIMEOUT, atu_rxeof); usbd_transfer(c->atu_xfer); } DPRINTFN(10, ("%s: starting up using MAC=%s\n", sc->atu_dev.dv_xname, ether_sprintf(ic->ic_myaddr))); /* Do initial setup */ err = atu_initial_config(sc); if (err) { DPRINTF(("%s: initial config failed!\n", sc->atu_dev.dv_xname)); splx(s); return(EIO); } DPRINTFN(10, ("%s: initialised transceiver\n", sc->atu_dev.dv_xname)); /* sc->atu_rxfilt = ATU_RXFILT_UNICAST|ATU_RXFILT_BROADCAST; */ /* If we want promiscuous mode, set the allframes bit. */ /* if (ifp->if_flags & IFF_PROMISC) sc->atu_rxfilt |= ATU_RXFILT_PROMISC; */ ifp->if_flags |= IFF_RUNNING; ifp->if_flags &= ~IFF_OACTIVE; splx(s); /* XXX the following HAS to be replaced */ s = splnet(); err = ieee80211_new_state(ic, IEEE80211_S_SCAN, -1); if (err) DPRINTFN(1, ("%s: atu_init: error calling " "ieee80211_net_state", sc->atu_dev.dv_xname)); splx(s); return 0; } int atu_ioctl(struct ifnet *ifp, u_long command, caddr_t data) { struct atu_softc *sc = ifp->if_softc; struct ifaddr *ifa; int err = 0, s; s = splnet(); switch (command) { case SIOCSIFADDR: DPRINTFN(15, ("%s: SIOCSIFADDR\n", sc->atu_dev.dv_xname)); ifa = (struct ifaddr *)data; ifp->if_flags |= IFF_UP; atu_init(ifp); switch (ifa->ifa_addr->sa_family) { #ifdef INET case AF_INET: arp_ifinit(&sc->sc_ic.ic_ac, ifa); break; #endif /* INET */ } break; case SIOCSIFFLAGS: DPRINTFN(15, ("%s: SIOCSIFFLAGS\n", sc->atu_dev.dv_xname)); if (ifp->if_flags & IFF_UP) { if (ifp->if_flags & IFF_RUNNING && ifp->if_flags & IFF_PROMISC && !(sc->atu_if_flags & IFF_PROMISC)) { /* enable promisc */ #if 0 sc->atu_rxfilt |= ATU_RXFILT_PROMISC; atu_setword(sc, ATU_CMD_SET_PKT_FILTER, sc->atu_rxfilt); #endif } else if (ifp->if_flags & IFF_RUNNING && !(ifp->if_flags & IFF_PROMISC) && sc->atu_if_flags & IFF_PROMISC) { /* disable promisc */ #if 0 sc->atu_rxfilt &= ~ATU_RXFILT_PROMISC; atu_setword(sc, ATU_CMD_SET_PKT_FILTER, sc->atu_rxfilt); #endif } else if (!(ifp->if_flags & IFF_RUNNING)) atu_init(ifp); DPRINTFN(15, ("%s: ioctl calling atu_init()\n", sc->atu_dev.dv_xname)); atu_init(ifp); err = atu_switch_radio(sc, 1); } else { if (ifp->if_flags & IFF_RUNNING) atu_stop(ifp, 0); err = atu_switch_radio(sc, 0); } sc->atu_if_flags = ifp->if_flags; err = 0; break; case SIOCADDMULTI: DPRINTFN(15, ("%s: SIOCADDMULTI\n", sc->atu_dev.dv_xname)); /* TODO: implement */ err = 0; break; case SIOCDELMULTI: DPRINTFN(15, ("%s: SIOCDELMULTI\n", sc->atu_dev.dv_xname)); /* TODO: implement */ err = 0; break; default: DPRINTFN(15, ("%s: ieee80211_ioctl (%lu)\n", sc->atu_dev.dv_xname, command)); err = ieee80211_ioctl(ifp, command, data); break; } if (err == ENETRESET) { if ((ifp->if_flags & (IFF_RUNNING|IFF_UP)) == (IFF_RUNNING|IFF_UP)) { DPRINTF(("%s: atu_ioctl(): netreset\n", sc->atu_dev.dv_xname)); atu_init(ifp); } err = 0; } splx(s); return (err); } void atu_watchdog(struct ifnet *ifp) { struct atu_softc *sc = ifp->if_softc; struct atu_chain *c; usbd_status stat; int cnt, s; DPRINTF(("%s: atu_watchdog\n", sc->atu_dev.dv_xname)); ifp->if_timer = 0; if ((ifp->if_flags & (IFF_RUNNING|IFF_UP)) != (IFF_RUNNING|IFF_UP)) return; if (sc->sc_state != ATU_S_OK) return; sc = ifp->if_softc; s = splnet(); ifp->if_oerrors++; DPRINTF(("%s: watchdog timeout\n", sc->atu_dev.dv_xname)); /* * TODO: * we should change this since we have multiple TX transfers... */ for (cnt = 0; cnt < ATU_TX_LIST_CNT; cnt++) { c = &sc->atu_cdata.atu_tx_chain[cnt]; if (c->atu_in_xfer) { usbd_get_xfer_status(c->atu_xfer, NULL, NULL, NULL, &stat); atu_txeof(c->atu_xfer, c, stat); } } if (!IFQ_IS_EMPTY(&ifp->if_snd)) atu_start(ifp); splx(s); ieee80211_watchdog(ifp); } /* * Stop the adapter and free any mbufs allocated to the * RX and TX lists. */ void atu_stop(struct ifnet *ifp, int disable) { struct atu_softc *sc = ifp->if_softc; struct atu_cdata *cd; usbd_status err; int s; s = splnet(); ifp->if_flags &= ~(IFF_RUNNING | IFF_OACTIVE); ifp->if_timer = 0; /* Stop transfers. */ if (sc->atu_ep[ATU_ENDPT_RX] != NULL) { err = usbd_abort_pipe(sc->atu_ep[ATU_ENDPT_RX]); if (err) { DPRINTF(("%s: abort rx pipe failed: %s\n", sc->atu_dev.dv_xname, usbd_errstr(err))); } err = usbd_close_pipe(sc->atu_ep[ATU_ENDPT_RX]); if (err) { DPRINTF(("%s: close rx pipe failed: %s\n", sc->atu_dev.dv_xname, usbd_errstr(err))); } sc->atu_ep[ATU_ENDPT_RX] = NULL; } if (sc->atu_ep[ATU_ENDPT_TX] != NULL) { err = usbd_abort_pipe(sc->atu_ep[ATU_ENDPT_TX]); if (err) { DPRINTF(("%s: abort tx pipe failed: %s\n", sc->atu_dev.dv_xname, usbd_errstr(err))); } err = usbd_close_pipe(sc->atu_ep[ATU_ENDPT_TX]); if (err) { DPRINTF(("%s: close tx pipe failed: %s\n", sc->atu_dev.dv_xname, usbd_errstr(err))); } sc->atu_ep[ATU_ENDPT_TX] = NULL; } /* Free RX/TX/MGMT list resources. */ cd = &sc->atu_cdata; atu_xfer_list_free(sc, cd->atu_rx_chain, ATU_RX_LIST_CNT); atu_xfer_list_free(sc, cd->atu_tx_chain, ATU_TX_LIST_CNT); /* Let's be nice and turn off the radio before we leave */ atu_switch_radio(sc, 0); splx(s); }