/* $OpenBSD: if_uath.c,v 1.56 2013/08/07 01:06:42 bluhm Exp $ */ /*- * Copyright (c) 2006 * Damien Bergamini * * Permission to use, copy, modify, and distribute this software for any * purpose with or without fee is hereby granted, provided that the above * copyright notice and this permission notice appear in all copies. * * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. */ /*- * Driver for Atheros AR5005UG/AR5005UX chipsets. * * IMPORTANT NOTICE: * This driver was written without any documentation or support from Atheros * Communications. It is based on a black-box analysis of the Windows binary * driver. It handles both pre and post-firmware devices. */ #include "bpfilter.h" #include #include #include #include #include #include #include #include #include #include #include #include #if NBPFILTER > 0 #include #endif #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include /* needs_reattach() */ #include #include #include #include #ifdef USB_DEBUG #define UATH_DEBUG #endif #ifdef UATH_DEBUG #define DPRINTF(x) do { if (uath_debug) printf x; } while (0) #define DPRINTFN(n, x) do { if (uath_debug >= (n)) printf x; } while (0) int uath_debug = 1; #else #define DPRINTF(x) #define DPRINTFN(n, x) #endif /*- * Various supported device vendors/products. * UB51: AR5005UG 802.11b/g, UB52: AR5005UX 802.11a/b/g */ #define UATH_DEV(v, p, f) \ { { USB_VENDOR_##v, USB_PRODUCT_##v##_##p }, (f) }, \ { { USB_VENDOR_##v, USB_PRODUCT_##v##_##p##_NF }, \ (f) | UATH_FLAG_PRE_FIRMWARE } #define UATH_DEV_UG(v, p) UATH_DEV(v, p, 0) #define UATH_DEV_UX(v, p) UATH_DEV(v, p, UATH_FLAG_ABG) static const struct uath_type { struct usb_devno dev; unsigned int flags; #define UATH_FLAG_PRE_FIRMWARE (1 << 0) #define UATH_FLAG_ABG (1 << 1) } uath_devs[] = { UATH_DEV_UG(ACCTON, SMCWUSBTG2), UATH_DEV_UG(ATHEROS, AR5523), UATH_DEV_UG(ATHEROS2, AR5523_1), UATH_DEV_UG(ATHEROS2, AR5523_2), UATH_DEV_UX(ATHEROS2, AR5523_3), UATH_DEV_UG(CONCEPTRONIC, AR5523_1), UATH_DEV_UX(CONCEPTRONIC, AR5523_2), UATH_DEV_UX(DLINK, DWLAG122), UATH_DEV_UX(DLINK, DWLAG132), UATH_DEV_UG(DLINK, DWLG132), UATH_DEV_UG(DLINK2, WUA2340), UATH_DEV_UG(GIGASET, AR5523), UATH_DEV_UG(GIGASET, SMCWUSBTG), UATH_DEV_UG(GLOBALSUN, AR5523_1), UATH_DEV_UX(GLOBALSUN, AR5523_2), UATH_DEV_UG(IODATA, USBWNG54US), UATH_DEV_UG(MELCO, WLIU2KAMG54), UATH_DEV_UX(NETGEAR, WG111U), UATH_DEV_UG(NETGEAR3, WG111T), UATH_DEV_UG(NETGEAR3, WPN111), UATH_DEV_UG(PHILIPS, SNU6500), UATH_DEV_UX(UMEDIA, AR5523_2), UATH_DEV_UG(UMEDIA, TEW444UBEU), UATH_DEV_UG(WISTRONNEWEB, AR5523_1), UATH_DEV_UX(WISTRONNEWEB, AR5523_2), UATH_DEV_UG(ZCOM, AR5523) }; #define uath_lookup(v, p) \ ((const struct uath_type *)usb_lookup(uath_devs, v, p)) void uath_attachhook(void *); int uath_open_pipes(struct uath_softc *); void uath_close_pipes(struct uath_softc *); int uath_alloc_tx_data_list(struct uath_softc *); void uath_free_tx_data_list(struct uath_softc *); int uath_alloc_rx_data_list(struct uath_softc *); void uath_free_rx_data_list(struct uath_softc *); int uath_alloc_tx_cmd_list(struct uath_softc *); void uath_free_tx_cmd_list(struct uath_softc *); int uath_alloc_rx_cmd_list(struct uath_softc *); void uath_free_rx_cmd_list(struct uath_softc *); int uath_media_change(struct ifnet *); void uath_stat(void *); void uath_next_scan(void *); void uath_task(void *); int uath_newstate(struct ieee80211com *, enum ieee80211_state, int); #ifdef UATH_DEBUG void uath_dump_cmd(const uint8_t *, int, char); #endif int uath_cmd(struct uath_softc *, uint32_t, const void *, int, void *, int); int uath_cmd_write(struct uath_softc *, uint32_t, const void *, int, int); int uath_cmd_read(struct uath_softc *, uint32_t, const void *, int, void *, int); int uath_write_reg(struct uath_softc *, uint32_t, uint32_t); int uath_write_multi(struct uath_softc *, uint32_t, const void *, int); int uath_read_reg(struct uath_softc *, uint32_t, uint32_t *); int uath_read_eeprom(struct uath_softc *, uint32_t, void *); void uath_cmd_rxeof(struct usbd_xfer *, void *, usbd_status); void uath_data_rxeof(struct usbd_xfer *, void *, usbd_status); void uath_data_txeof(struct usbd_xfer *, void *, usbd_status); int uath_tx_null(struct uath_softc *); int uath_tx_data(struct uath_softc *, struct mbuf *, struct ieee80211_node *); void uath_start(struct ifnet *); void uath_watchdog(struct ifnet *); int uath_ioctl(struct ifnet *, u_long, caddr_t); int uath_query_eeprom(struct uath_softc *); int uath_reset(struct uath_softc *); int uath_reset_tx_queues(struct uath_softc *); int uath_wme_init(struct uath_softc *); int uath_set_chan(struct uath_softc *, struct ieee80211_channel *); int uath_set_key(struct uath_softc *, const struct ieee80211_key *, int); int uath_set_keys(struct uath_softc *); int uath_set_rates(struct uath_softc *, const struct ieee80211_rateset *); int uath_set_rxfilter(struct uath_softc *, uint32_t, uint32_t); int uath_set_led(struct uath_softc *, int, int); int uath_switch_channel(struct uath_softc *, struct ieee80211_channel *); int uath_init(struct ifnet *); void uath_stop(struct ifnet *, int); int uath_loadfirmware(struct uath_softc *, const u_char *, int); int uath_activate(struct device *, int); int uath_match(struct device *, void *, void *); void uath_attach(struct device *, struct device *, void *); int uath_detach(struct device *, int); int uath_activate(struct device *, int); struct cfdriver uath_cd = { NULL, "uath", DV_IFNET }; const struct cfattach uath_ca = { sizeof(struct uath_softc), uath_match, uath_attach, uath_detach, uath_activate, }; int uath_match(struct device *parent, void *match, void *aux) { struct usb_attach_arg *uaa = aux; if (uaa->iface != NULL) return UMATCH_NONE; return (uath_lookup(uaa->vendor, uaa->product) != NULL) ? UMATCH_VENDOR_PRODUCT : UMATCH_NONE; } void uath_attachhook(void *xsc) { struct uath_softc *sc = xsc; u_char *fw; size_t size; int error; if ((error = loadfirmware("uath-ar5523", &fw, &size)) != 0) { printf("%s: error %d, could not read firmware %s\n", sc->sc_dev.dv_xname, error, "uath-ar5523"); return; } error = uath_loadfirmware(sc, fw, size); free(fw, M_DEVBUF); if (error == 0) { usb_port_status_t status; /* * Hack alert: the device doesn't always gracefully detach * from the bus after a firmware upload. We need to force * a port reset and a re-exploration on the parent hub. */ usbd_reset_port(sc->sc_uhub, sc->sc_port, &status); usb_needs_reattach(sc->sc_udev); } else { printf("%s: could not load firmware (error=%s)\n", sc->sc_dev.dv_xname, usbd_errstr(error)); } } void uath_attach(struct device *parent, struct device *self, void *aux) { struct uath_softc *sc = (struct uath_softc *)self; struct usb_attach_arg *uaa = aux; struct ieee80211com *ic = &sc->sc_ic; struct ifnet *ifp = &ic->ic_if; usbd_status error; int i; sc->sc_udev = uaa->device; sc->sc_uhub = uaa->device->myhub; sc->sc_port = uaa->port; sc->sc_flags = uath_lookup(uaa->vendor, uaa->product)->flags; if (usbd_set_config_no(sc->sc_udev, UATH_CONFIG_NO, 0) != 0) { printf("%s: could not set configuration no\n", sc->sc_dev.dv_xname); return; } /* get the first interface handle */ error = usbd_device2interface_handle(sc->sc_udev, UATH_IFACE_INDEX, &sc->sc_iface); if (error != 0) { printf("%s: could not get interface handle\n", sc->sc_dev.dv_xname); return; } /* * We must open the pipes early because they're used to upload the * firmware (pre-firmware devices) or to send firmware commands. */ if (uath_open_pipes(sc) != 0) { printf("%s: could not open pipes\n", sc->sc_dev.dv_xname); return; } if (sc->sc_flags & UATH_FLAG_PRE_FIRMWARE) { if (rootvp == NULL) mountroothook_establish(uath_attachhook, sc); else uath_attachhook(sc); return; } /* * Only post-firmware devices here. */ usb_init_task(&sc->sc_task, uath_task, sc, USB_TASK_TYPE_GENERIC); timeout_set(&sc->scan_to, uath_next_scan, sc); timeout_set(&sc->stat_to, uath_stat, sc); /* * Allocate xfers for firmware commands. */ if (uath_alloc_tx_cmd_list(sc) != 0) { printf("%s: could not allocate Tx command list\n", sc->sc_dev.dv_xname); goto fail1; } if (uath_alloc_rx_cmd_list(sc) != 0) { printf("%s: could not allocate Rx command list\n", sc->sc_dev.dv_xname); goto fail2; } /* * Queue Rx command xfers. */ for (i = 0; i < UATH_RX_CMD_LIST_COUNT; i++) { struct uath_rx_cmd *cmd = &sc->rx_cmd[i]; usbd_setup_xfer(cmd->xfer, sc->cmd_rx_pipe, cmd, cmd->buf, UATH_MAX_RXCMDSZ, USBD_SHORT_XFER_OK | USBD_NO_COPY, USBD_NO_TIMEOUT, uath_cmd_rxeof); error = usbd_transfer(cmd->xfer); if (error != USBD_IN_PROGRESS && error != 0) { printf("%s: could not queue Rx command xfer\n", sc->sc_dev.dv_xname); goto fail3; } } /* * We're now ready to send/receive firmware commands. */ if (uath_reset(sc) != 0) { printf("%s: could not initialize adapter\n", sc->sc_dev.dv_xname); goto fail3; } if (uath_query_eeprom(sc) != 0) { printf("%s: could not read EEPROM\n", sc->sc_dev.dv_xname); goto fail3; } printf("%s: MAC/BBP AR5523, RF AR%c112, address %s\n", sc->sc_dev.dv_xname, (sc->sc_flags & UATH_FLAG_ABG) ? '5': '2', ether_sprintf(ic->ic_myaddr)); /* * Allocate xfers for Tx/Rx data pipes. */ if (uath_alloc_tx_data_list(sc) != 0) { printf("%s: could not allocate Tx data list\n", sc->sc_dev.dv_xname); goto fail3; } if (uath_alloc_rx_data_list(sc) != 0) { printf("%s: could not allocate Rx data list\n", sc->sc_dev.dv_xname); goto fail4; } ic->ic_phytype = IEEE80211_T_OFDM; /* not only, but not used */ ic->ic_opmode = IEEE80211_M_STA; /* default to BSS mode */ ic->ic_state = IEEE80211_S_INIT; /* set device capabilities */ ic->ic_caps = IEEE80211_C_MONITOR | /* monitor mode supported */ IEEE80211_C_TXPMGT | /* tx power management */ IEEE80211_C_SHPREAMBLE | /* short preamble supported */ IEEE80211_C_SHSLOT | /* short slot time supported */ IEEE80211_C_WEP; /* h/w WEP */ /* set supported .11b and .11g rates */ ic->ic_sup_rates[IEEE80211_MODE_11B] = ieee80211_std_rateset_11b; ic->ic_sup_rates[IEEE80211_MODE_11G] = ieee80211_std_rateset_11g; /* set supported .11b and .11g channels (1 through 14) */ for (i = 1; i <= 14; i++) { ic->ic_channels[i].ic_freq = ieee80211_ieee2mhz(i, IEEE80211_CHAN_2GHZ); ic->ic_channels[i].ic_flags = IEEE80211_CHAN_CCK | IEEE80211_CHAN_OFDM | IEEE80211_CHAN_DYN | IEEE80211_CHAN_2GHZ; } ifp->if_softc = sc; ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST; ifp->if_ioctl = uath_ioctl; ifp->if_start = uath_start; ifp->if_watchdog = uath_watchdog; IFQ_SET_READY(&ifp->if_snd); memcpy(ifp->if_xname, sc->sc_dev.dv_xname, IFNAMSIZ); if_attach(ifp); ieee80211_ifattach(ifp); /* override state transition machine */ sc->sc_newstate = ic->ic_newstate; ic->ic_newstate = uath_newstate; ieee80211_media_init(ifp, uath_media_change, ieee80211_media_status); #if NBPFILTER > 0 bpfattach(&sc->sc_drvbpf, ifp, DLT_IEEE802_11_RADIO, sizeof (struct ieee80211_frame) + IEEE80211_RADIOTAP_HDRLEN); sc->sc_rxtap_len = sizeof sc->sc_rxtapu; sc->sc_rxtap.wr_ihdr.it_len = htole16(sc->sc_rxtap_len); sc->sc_rxtap.wr_ihdr.it_present = htole32(UATH_RX_RADIOTAP_PRESENT); sc->sc_txtap_len = sizeof sc->sc_txtapu; sc->sc_txtap.wt_ihdr.it_len = htole16(sc->sc_txtap_len); sc->sc_txtap.wt_ihdr.it_present = htole32(UATH_TX_RADIOTAP_PRESENT); #endif return; fail4: uath_free_tx_data_list(sc); fail3: uath_free_rx_cmd_list(sc); fail2: uath_free_tx_cmd_list(sc); fail1: uath_close_pipes(sc); usbd_deactivate(sc->sc_udev); } int uath_detach(struct device *self, int flags) { struct uath_softc *sc = (struct uath_softc *)self; struct ifnet *ifp = &sc->sc_ic.ic_if; int s; s = splnet(); if (sc->sc_flags & UATH_FLAG_PRE_FIRMWARE) { uath_close_pipes(sc); splx(s); return 0; } /* post-firmware device */ usb_rem_task(sc->sc_udev, &sc->sc_task); if (timeout_initialized(&sc->scan_to)) timeout_del(&sc->scan_to); if (timeout_initialized(&sc->stat_to)) timeout_del(&sc->stat_to); /* abort and free xfers */ uath_free_tx_data_list(sc); uath_free_rx_data_list(sc); uath_free_tx_cmd_list(sc); uath_free_rx_cmd_list(sc); /* close Tx/Rx pipes */ uath_close_pipes(sc); if (ifp->if_softc != NULL) { ieee80211_ifdetach(ifp); /* free all nodes */ if_detach(ifp); } splx(s); return 0; } int uath_open_pipes(struct uath_softc *sc) { int error; /* * XXX pipes numbers are hardcoded because we don't have any way * to distinguish the data pipes from the firmware command pipes * (both are bulk pipes) using the endpoints descriptors. */ error = usbd_open_pipe(sc->sc_iface, 0x01, USBD_EXCLUSIVE_USE, &sc->cmd_tx_pipe); if (error != 0) { printf("%s: could not open Tx command pipe: %s\n", sc->sc_dev.dv_xname, usbd_errstr(error)); goto fail; } error = usbd_open_pipe(sc->sc_iface, 0x02, USBD_EXCLUSIVE_USE, &sc->data_tx_pipe); if (error != 0) { printf("%s: could not open Tx data pipe: %s\n", sc->sc_dev.dv_xname, usbd_errstr(error)); goto fail; } error = usbd_open_pipe(sc->sc_iface, 0x81, USBD_EXCLUSIVE_USE, &sc->cmd_rx_pipe); if (error != 0) { printf("%s: could not open Rx command pipe: %s\n", sc->sc_dev.dv_xname, usbd_errstr(error)); goto fail; } error = usbd_open_pipe(sc->sc_iface, 0x82, USBD_EXCLUSIVE_USE, &sc->data_rx_pipe); if (error != 0) { printf("%s: could not open Rx data pipe: %s\n", sc->sc_dev.dv_xname, usbd_errstr(error)); goto fail; } return 0; fail: uath_close_pipes(sc); return error; } void uath_close_pipes(struct uath_softc *sc) { /* assumes no transfers are pending on the pipes */ if (sc->data_tx_pipe != NULL) usbd_close_pipe(sc->data_tx_pipe); if (sc->data_rx_pipe != NULL) usbd_close_pipe(sc->data_rx_pipe); if (sc->cmd_tx_pipe != NULL) usbd_close_pipe(sc->cmd_tx_pipe); if (sc->cmd_rx_pipe != NULL) usbd_close_pipe(sc->cmd_rx_pipe); } int uath_alloc_tx_data_list(struct uath_softc *sc) { int i, error; for (i = 0; i < UATH_TX_DATA_LIST_COUNT; i++) { struct uath_tx_data *data = &sc->tx_data[i]; data->sc = sc; /* backpointer for callbacks */ data->xfer = usbd_alloc_xfer(sc->sc_udev); if (data->xfer == NULL) { printf("%s: could not allocate xfer\n", sc->sc_dev.dv_xname); error = ENOMEM; goto fail; } data->buf = usbd_alloc_buffer(data->xfer, UATH_MAX_TXBUFSZ); if (data->buf == NULL) { printf("%s: could not allocate xfer buffer\n", sc->sc_dev.dv_xname); error = ENOMEM; goto fail; } } return 0; fail: uath_free_tx_data_list(sc); return error; } void uath_free_tx_data_list(struct uath_softc *sc) { int i; /* make sure no transfers are pending */ usbd_abort_pipe(sc->data_tx_pipe); for (i = 0; i < UATH_TX_DATA_LIST_COUNT; i++) if (sc->tx_data[i].xfer != NULL) usbd_free_xfer(sc->tx_data[i].xfer); } int uath_alloc_rx_data_list(struct uath_softc *sc) { int i, error; for (i = 0; i < UATH_RX_DATA_LIST_COUNT; i++) { struct uath_rx_data *data = &sc->rx_data[i]; data->sc = sc; /* backpointer for callbacks */ data->xfer = usbd_alloc_xfer(sc->sc_udev); if (data->xfer == NULL) { printf("%s: could not allocate xfer\n", sc->sc_dev.dv_xname); error = ENOMEM; goto fail; } if (usbd_alloc_buffer(data->xfer, sc->rxbufsz) == NULL) { printf("%s: could not allocate xfer buffer\n", sc->sc_dev.dv_xname); error = ENOMEM; goto fail; } MGETHDR(data->m, M_DONTWAIT, MT_DATA); if (data->m == NULL) { printf("%s: could not allocate rx mbuf\n", sc->sc_dev.dv_xname); error = ENOMEM; goto fail; } MCLGET(data->m, M_DONTWAIT); if (!(data->m->m_flags & M_EXT)) { printf("%s: could not allocate rx mbuf cluster\n", sc->sc_dev.dv_xname); error = ENOMEM; goto fail; } data->buf = mtod(data->m, uint8_t *); } return 0; fail: uath_free_rx_data_list(sc); return error; } void uath_free_rx_data_list(struct uath_softc *sc) { int i; /* make sure no transfers are pending */ usbd_abort_pipe(sc->data_rx_pipe); for (i = 0; i < UATH_RX_DATA_LIST_COUNT; i++) { struct uath_rx_data *data = &sc->rx_data[i]; if (data->xfer != NULL) usbd_free_xfer(data->xfer); if (data->m != NULL) m_freem(data->m); } } int uath_alloc_tx_cmd_list(struct uath_softc *sc) { int i, error; for (i = 0; i < UATH_TX_CMD_LIST_COUNT; i++) { struct uath_tx_cmd *cmd = &sc->tx_cmd[i]; cmd->sc = sc; /* backpointer for callbacks */ cmd->xfer = usbd_alloc_xfer(sc->sc_udev); if (cmd->xfer == NULL) { printf("%s: could not allocate xfer\n", sc->sc_dev.dv_xname); error = ENOMEM; goto fail; } cmd->buf = usbd_alloc_buffer(cmd->xfer, UATH_MAX_TXCMDSZ); if (cmd->buf == NULL) { printf("%s: could not allocate xfer buffer\n", sc->sc_dev.dv_xname); error = ENOMEM; goto fail; } } return 0; fail: uath_free_tx_cmd_list(sc); return error; } void uath_free_tx_cmd_list(struct uath_softc *sc) { int i; /* make sure no transfers are pending */ usbd_abort_pipe(sc->cmd_tx_pipe); for (i = 0; i < UATH_TX_CMD_LIST_COUNT; i++) if (sc->tx_cmd[i].xfer != NULL) usbd_free_xfer(sc->tx_cmd[i].xfer); } int uath_alloc_rx_cmd_list(struct uath_softc *sc) { int i, error; for (i = 0; i < UATH_RX_CMD_LIST_COUNT; i++) { struct uath_rx_cmd *cmd = &sc->rx_cmd[i]; cmd->sc = sc; /* backpointer for callbacks */ cmd->xfer = usbd_alloc_xfer(sc->sc_udev); if (cmd->xfer == NULL) { printf("%s: could not allocate xfer\n", sc->sc_dev.dv_xname); error = ENOMEM; goto fail; } cmd->buf = usbd_alloc_buffer(cmd->xfer, UATH_MAX_RXCMDSZ); if (cmd->buf == NULL) { printf("%s: could not allocate xfer buffer\n", sc->sc_dev.dv_xname); error = ENOMEM; goto fail; } } return 0; fail: uath_free_rx_cmd_list(sc); return error; } void uath_free_rx_cmd_list(struct uath_softc *sc) { int i; /* make sure no transfers are pending */ usbd_abort_pipe(sc->cmd_rx_pipe); for (i = 0; i < UATH_RX_CMD_LIST_COUNT; i++) if (sc->rx_cmd[i].xfer != NULL) usbd_free_xfer(sc->rx_cmd[i].xfer); } int uath_media_change(struct ifnet *ifp) { int error; error = ieee80211_media_change(ifp); if (error != ENETRESET) return error; if ((ifp->if_flags & (IFF_UP | IFF_RUNNING)) == (IFF_UP | IFF_RUNNING)) uath_init(ifp); return 0; } /* * This function is called periodically (every second) when associated to * query device statistics. */ void uath_stat(void *arg) { struct uath_softc *sc = arg; int error; /* * Send request for statistics asynchronously. The timer will be * restarted when we'll get the stats notification. */ error = uath_cmd_write(sc, UATH_CMD_STATS, NULL, 0, UATH_CMD_FLAG_ASYNC); if (error != 0) { printf("%s: could not query statistics (error=%d)\n", sc->sc_dev.dv_xname, error); } } /* * This function is called periodically (every 250ms) during scanning to * switch from one channel to another. */ void uath_next_scan(void *arg) { struct uath_softc *sc = arg; struct ieee80211com *ic = &sc->sc_ic; struct ifnet *ifp = &ic->ic_if; if (ic->ic_state == IEEE80211_S_SCAN) ieee80211_next_scan(ifp); } void uath_task(void *arg) { struct uath_softc *sc = arg; struct ieee80211com *ic = &sc->sc_ic; enum ieee80211_state ostate; ostate = ic->ic_state; switch (sc->sc_state) { case IEEE80211_S_INIT: if (ostate == IEEE80211_S_RUN) { /* turn link and activity LEDs off */ (void)uath_set_led(sc, UATH_LED_LINK, 0); (void)uath_set_led(sc, UATH_LED_ACTIVITY, 0); } break; case IEEE80211_S_SCAN: if (uath_switch_channel(sc, ic->ic_bss->ni_chan) != 0) { printf("%s: could not switch channel\n", sc->sc_dev.dv_xname); break; } timeout_add_msec(&sc->scan_to, 250); break; case IEEE80211_S_AUTH: { struct ieee80211_node *ni = ic->ic_bss; struct uath_cmd_bssid bssid; struct uath_cmd_0b cmd0b; struct uath_cmd_0c cmd0c; if (uath_switch_channel(sc, ni->ni_chan) != 0) { printf("%s: could not switch channel\n", sc->sc_dev.dv_xname); break; } (void)uath_cmd_write(sc, UATH_CMD_24, NULL, 0, 0); bzero(&bssid, sizeof bssid); bssid.len = htobe32(IEEE80211_ADDR_LEN); IEEE80211_ADDR_COPY(bssid.bssid, ni->ni_bssid); (void)uath_cmd_write(sc, UATH_CMD_SET_BSSID, &bssid, sizeof bssid, 0); bzero(&cmd0b, sizeof cmd0b); cmd0b.code = htobe32(2); cmd0b.size = htobe32(sizeof (cmd0b.data)); (void)uath_cmd_write(sc, UATH_CMD_0B, &cmd0b, sizeof cmd0b, 0); bzero(&cmd0c, sizeof cmd0c); cmd0c.magic1 = htobe32(2); cmd0c.magic2 = htobe32(7); cmd0c.magic3 = htobe32(1); (void)uath_cmd_write(sc, UATH_CMD_0C, &cmd0c, sizeof cmd0c, 0); if (uath_set_rates(sc, &ni->ni_rates) != 0) { printf("%s: could not set negotiated rate set\n", sc->sc_dev.dv_xname); break; } break; } case IEEE80211_S_ASSOC: break; case IEEE80211_S_RUN: { struct ieee80211_node *ni = ic->ic_bss; struct uath_cmd_bssid bssid; struct uath_cmd_xled xled; uint32_t val; if (ic->ic_opmode == IEEE80211_M_MONITOR) { /* make both LEDs blink while monitoring */ bzero(&xled, sizeof xled); xled.which = htobe32(0); xled.rate = htobe32(1); xled.mode = htobe32(2); (void)uath_cmd_write(sc, UATH_CMD_SET_XLED, &xled, sizeof xled, 0); break; } /* * Tx rate is controlled by firmware, report the maximum * negotiated rate in ifconfig output. */ ni->ni_txrate = ni->ni_rates.rs_nrates - 1; val = htobe32(1); (void)uath_cmd_write(sc, UATH_CMD_2E, &val, sizeof val, 0); bzero(&bssid, sizeof bssid); bssid.flags1 = htobe32(0xc004); bssid.flags2 = htobe32(0x003b); bssid.len = htobe32(IEEE80211_ADDR_LEN); IEEE80211_ADDR_COPY(bssid.bssid, ni->ni_bssid); (void)uath_cmd_write(sc, UATH_CMD_SET_BSSID, &bssid, sizeof bssid, 0); /* turn link LED on */ (void)uath_set_led(sc, UATH_LED_LINK, 1); /* make activity LED blink */ bzero(&xled, sizeof xled); xled.which = htobe32(1); xled.rate = htobe32(1); xled.mode = htobe32(2); (void)uath_cmd_write(sc, UATH_CMD_SET_XLED, &xled, sizeof xled, 0); /* set state to associated */ val = htobe32(1); (void)uath_cmd_write(sc, UATH_CMD_SET_STATE, &val, sizeof val, 0); /* start statistics timer */ timeout_add_sec(&sc->stat_to, 1); break; } } sc->sc_newstate(ic, sc->sc_state, sc->sc_arg); } int uath_newstate(struct ieee80211com *ic, enum ieee80211_state nstate, int arg) { struct uath_softc *sc = ic->ic_softc; usb_rem_task(sc->sc_udev, &sc->sc_task); timeout_del(&sc->scan_to); timeout_del(&sc->stat_to); /* do it in a process context */ sc->sc_state = nstate; sc->sc_arg = arg; usb_add_task(sc->sc_udev, &sc->sc_task); return 0; } #ifdef UATH_DEBUG void uath_dump_cmd(const uint8_t *buf, int len, char prefix) { int i; for (i = 0; i < len; i++) { if ((i % 16) == 0) printf("\n%c ", prefix); else if ((i % 4) == 0) printf(" "); printf("%02x", buf[i]); } printf("\n"); } #endif /* * Low-level function to send read or write commands to the firmware. */ int uath_cmd(struct uath_softc *sc, uint32_t code, const void *idata, int ilen, void *odata, int flags) { struct uath_cmd_hdr *hdr; struct uath_tx_cmd *cmd; uint16_t xferflags; int s, xferlen, error; /* grab a xfer */ cmd = &sc->tx_cmd[sc->cmd_idx]; /* always bulk-out a multiple of 4 bytes */ xferlen = (sizeof (struct uath_cmd_hdr) + ilen + 3) & ~3; hdr = (struct uath_cmd_hdr *)cmd->buf; bzero(hdr, sizeof (struct uath_cmd_hdr)); hdr->len = htobe32(xferlen); hdr->code = htobe32(code); hdr->priv = sc->cmd_idx; /* don't care about endianness */ hdr->magic = htobe32((flags & UATH_CMD_FLAG_MAGIC) ? 1 << 24 : 0); bcopy(idata, (uint8_t *)(hdr + 1), ilen); #ifdef UATH_DEBUG if (uath_debug >= 5) { printf("sending command code=0x%02x flags=0x%x index=%u", code, flags, sc->cmd_idx); uath_dump_cmd(cmd->buf, xferlen, '+'); } #endif xferflags = USBD_FORCE_SHORT_XFER | USBD_NO_COPY; if (!(flags & UATH_CMD_FLAG_READ)) { if (!(flags & UATH_CMD_FLAG_ASYNC)) xferflags |= USBD_SYNCHRONOUS; } else s = splusb(); cmd->odata = odata; usbd_setup_xfer(cmd->xfer, sc->cmd_tx_pipe, cmd, cmd->buf, xferlen, xferflags, UATH_CMD_TIMEOUT, NULL); error = usbd_transfer(cmd->xfer); if (error != USBD_IN_PROGRESS && error != 0) { if (flags & UATH_CMD_FLAG_READ) splx(s); printf("%s: could not send command 0x%x (error=%s)\n", sc->sc_dev.dv_xname, code, usbd_errstr(error)); return error; } sc->cmd_idx = (sc->cmd_idx + 1) % UATH_TX_CMD_LIST_COUNT; if (!(flags & UATH_CMD_FLAG_READ)) return 0; /* write: don't wait for reply */ /* wait at most two seconds for command reply */ error = tsleep(cmd, PCATCH, "uathcmd", 2 * hz); cmd->odata = NULL; /* in case answer is received too late */ splx(s); if (error != 0) { printf("%s: timeout waiting for command reply\n", sc->sc_dev.dv_xname); } return error; } int uath_cmd_write(struct uath_softc *sc, uint32_t code, const void *data, int len, int flags) { flags &= ~UATH_CMD_FLAG_READ; return uath_cmd(sc, code, data, len, NULL, flags); } int uath_cmd_read(struct uath_softc *sc, uint32_t code, const void *idata, int ilen, void *odata, int flags) { flags |= UATH_CMD_FLAG_READ; return uath_cmd(sc, code, idata, ilen, odata, flags); } int uath_write_reg(struct uath_softc *sc, uint32_t reg, uint32_t val) { struct uath_write_mac write; int error; write.reg = htobe32(reg); write.len = htobe32(0); /* 0 = single write */ *(uint32_t *)write.data = htobe32(val); error = uath_cmd_write(sc, UATH_CMD_WRITE_MAC, &write, 3 * sizeof (uint32_t), 0); if (error != 0) { printf("%s: could not write register 0x%02x\n", sc->sc_dev.dv_xname, reg); } return error; } int uath_write_multi(struct uath_softc *sc, uint32_t reg, const void *data, int len) { struct uath_write_mac write; int error; write.reg = htobe32(reg); write.len = htobe32(len); bcopy(data, write.data, len); /* properly handle the case where len is zero (reset) */ error = uath_cmd_write(sc, UATH_CMD_WRITE_MAC, &write, (len == 0) ? sizeof (uint32_t) : 2 * sizeof (uint32_t) + len, 0); if (error != 0) { printf("%s: could not write %d bytes to register 0x%02x\n", sc->sc_dev.dv_xname, len, reg); } return error; } int uath_read_reg(struct uath_softc *sc, uint32_t reg, uint32_t *val) { struct uath_read_mac read; int error; reg = htobe32(reg); error = uath_cmd_read(sc, UATH_CMD_READ_MAC, ®, sizeof reg, &read, 0); if (error != 0) { printf("%s: could not read register 0x%02x\n", sc->sc_dev.dv_xname, betoh32(reg)); return error; } *val = betoh32(*(uint32_t *)read.data); return error; } int uath_read_eeprom(struct uath_softc *sc, uint32_t reg, void *odata) { struct uath_read_mac read; int len, error; reg = htobe32(reg); error = uath_cmd_read(sc, UATH_CMD_READ_EEPROM, ®, sizeof reg, &read, 0); if (error != 0) { printf("%s: could not read EEPROM offset 0x%02x\n", sc->sc_dev.dv_xname, betoh32(reg)); return error; } len = betoh32(read.len); bcopy(read.data, odata, (len == 0) ? sizeof (uint32_t) : len); return error; } void uath_cmd_rxeof(struct usbd_xfer *xfer, void *priv, usbd_status status) { struct uath_rx_cmd *cmd = priv; struct uath_softc *sc = cmd->sc; struct uath_cmd_hdr *hdr; if (status != USBD_NORMAL_COMPLETION) { if (status == USBD_STALLED) usbd_clear_endpoint_stall_async(sc->cmd_rx_pipe); return; } hdr = (struct uath_cmd_hdr *)cmd->buf; #ifdef UATH_DEBUG if (uath_debug >= 5) { printf("received command code=0x%x index=%u len=%u", betoh32(hdr->code), hdr->priv, betoh32(hdr->len)); uath_dump_cmd(cmd->buf, betoh32(hdr->len), '-'); } #endif switch (betoh32(hdr->code) & 0xff) { /* reply to a read command */ default: { struct uath_tx_cmd *txcmd = &sc->tx_cmd[hdr->priv]; if (txcmd->odata != NULL) { /* copy answer into caller's supplied buffer */ bcopy((uint8_t *)(hdr + 1), txcmd->odata, betoh32(hdr->len) - sizeof (struct uath_cmd_hdr)); } wakeup(txcmd); /* wake up caller */ break; } /* spontaneous firmware notifications */ case UATH_NOTIF_READY: DPRINTF(("received device ready notification\n")); wakeup(UATH_COND_INIT(sc)); break; case UATH_NOTIF_TX: /* this notification is sent when UATH_TX_NOTIFY is set */ DPRINTF(("received Tx notification\n")); break; case UATH_NOTIF_STATS: DPRINTFN(2, ("received device statistics\n")); timeout_add_sec(&sc->stat_to, 1); break; } /* setup a new transfer */ usbd_setup_xfer(xfer, sc->cmd_rx_pipe, cmd, cmd->buf, UATH_MAX_RXCMDSZ, USBD_SHORT_XFER_OK | USBD_NO_COPY, USBD_NO_TIMEOUT, uath_cmd_rxeof); (void)usbd_transfer(xfer); } void uath_data_rxeof(struct usbd_xfer *xfer, void *priv, usbd_status status) { struct uath_rx_data *data = priv; struct uath_softc *sc = data->sc; struct ieee80211com *ic = &sc->sc_ic; struct ifnet *ifp = &ic->ic_if; struct ieee80211_frame *wh; struct ieee80211_rxinfo rxi; struct ieee80211_node *ni; struct uath_rx_desc *desc; struct mbuf *mnew, *m; uint32_t hdr; int s, len; if (status != USBD_NORMAL_COMPLETION) { if (status == USBD_NOT_STARTED || status == USBD_CANCELLED) return; if (status == USBD_STALLED) usbd_clear_endpoint_stall_async(sc->data_rx_pipe); ifp->if_ierrors++; return; } usbd_get_xfer_status(xfer, NULL, NULL, &len, NULL); if (len < UATH_MIN_RXBUFSZ) { DPRINTF(("wrong xfer size (len=%d)\n", len)); ifp->if_ierrors++; goto skip; } hdr = betoh32(*(uint32_t *)data->buf); /* Rx descriptor is located at the end, 32-bit aligned */ desc = (struct uath_rx_desc *) (data->buf + len - sizeof (struct uath_rx_desc)); if (betoh32(desc->len) > sc->rxbufsz) { DPRINTF(("bad descriptor (len=%d)\n", betoh32(desc->len))); ifp->if_ierrors++; goto skip; } /* there's probably a "bad CRC" flag somewhere in the descriptor.. */ MGETHDR(mnew, M_DONTWAIT, MT_DATA); if (mnew == NULL) { printf("%s: could not allocate rx mbuf\n", sc->sc_dev.dv_xname); ifp->if_ierrors++; goto skip; } MCLGET(mnew, M_DONTWAIT); if (!(mnew->m_flags & M_EXT)) { printf("%s: could not allocate rx mbuf cluster\n", sc->sc_dev.dv_xname); m_freem(mnew); ifp->if_ierrors++; goto skip; } m = data->m; data->m = mnew; /* finalize mbuf */ m->m_pkthdr.rcvif = ifp; m->m_data = data->buf + sizeof (uint32_t); m->m_pkthdr.len = m->m_len = betoh32(desc->len) - sizeof (struct uath_rx_desc) - IEEE80211_CRC_LEN; data->buf = mtod(data->m, uint8_t *); wh = mtod(m, struct ieee80211_frame *); rxi.rxi_flags = 0; if ((wh->i_fc[1] & IEEE80211_FC1_WEP) && ic->ic_opmode != IEEE80211_M_MONITOR) { /* * Hardware decrypts the frame itself but leaves the WEP bit * set in the 802.11 header and doesn't remove the IV and CRC * fields. */ wh->i_fc[1] &= ~IEEE80211_FC1_WEP; memmove((caddr_t)wh + IEEE80211_WEP_IVLEN + IEEE80211_WEP_KIDLEN, wh, sizeof (struct ieee80211_frame)); m_adj(m, IEEE80211_WEP_IVLEN + IEEE80211_WEP_KIDLEN); m_adj(m, -IEEE80211_WEP_CRCLEN); wh = mtod(m, struct ieee80211_frame *); rxi.rxi_flags |= IEEE80211_RXI_HWDEC; } #if NBPFILTER > 0 /* there are a lot more fields in the Rx descriptor */ if (sc->sc_drvbpf != NULL) { struct mbuf mb; struct uath_rx_radiotap_header *tap = &sc->sc_rxtap; tap->wr_flags = 0; tap->wr_chan_freq = htole16(betoh32(desc->freq)); tap->wr_chan_flags = htole16(ic->ic_bss->ni_chan->ic_flags); tap->wr_dbm_antsignal = (int8_t)betoh32(desc->rssi); mb.m_data = (caddr_t)tap; mb.m_len = sc->sc_rxtap_len; mb.m_next = m; mb.m_nextpkt = NULL; mb.m_type = 0; mb.m_flags = 0; bpf_mtap(sc->sc_drvbpf, &mb, BPF_DIRECTION_IN); } #endif s = splnet(); ni = ieee80211_find_rxnode(ic, wh); rxi.rxi_rssi = (int)betoh32(desc->rssi); rxi.rxi_tstamp = 0; /* unused */ ieee80211_input(ifp, m, ni, &rxi); /* node is no longer needed */ ieee80211_release_node(ic, ni); splx(s); skip: /* setup a new transfer */ usbd_setup_xfer(xfer, sc->data_rx_pipe, data, data->buf, sc->rxbufsz, USBD_SHORT_XFER_OK, USBD_NO_TIMEOUT, uath_data_rxeof); (void)usbd_transfer(data->xfer); } int uath_tx_null(struct uath_softc *sc) { struct uath_tx_data *data; struct uath_tx_desc *desc; data = &sc->tx_data[sc->data_idx]; data->ni = NULL; *(uint32_t *)data->buf = UATH_MAKECTL(1, sizeof (struct uath_tx_desc)); desc = (struct uath_tx_desc *)(data->buf + sizeof (uint32_t)); bzero(desc, sizeof (struct uath_tx_desc)); desc->len = htobe32(sizeof (struct uath_tx_desc)); desc->type = htobe32(UATH_TX_NULL); usbd_setup_xfer(data->xfer, sc->data_tx_pipe, data, data->buf, sizeof (uint32_t) + sizeof (struct uath_tx_desc), USBD_NO_COPY | USBD_FORCE_SHORT_XFER | USBD_SYNCHRONOUS, UATH_DATA_TIMEOUT, NULL); if (usbd_transfer(data->xfer) != 0) return EIO; sc->data_idx = (sc->data_idx + 1) % UATH_TX_DATA_LIST_COUNT; return uath_cmd_write(sc, UATH_CMD_0F, NULL, 0, UATH_CMD_FLAG_ASYNC); } void uath_data_txeof(struct usbd_xfer *xfer, void *priv, usbd_status status) { struct uath_tx_data *data = priv; struct uath_softc *sc = data->sc; struct ieee80211com *ic = &sc->sc_ic; struct ifnet *ifp = &ic->ic_if; int s; if (status != USBD_NORMAL_COMPLETION) { if (status == USBD_NOT_STARTED || status == USBD_CANCELLED) return; printf("%s: could not transmit buffer: %s\n", sc->sc_dev.dv_xname, usbd_errstr(status)); if (status == USBD_STALLED) usbd_clear_endpoint_stall_async(sc->data_tx_pipe); ifp->if_oerrors++; return; } s = splnet(); ieee80211_release_node(ic, data->ni); data->ni = NULL; sc->tx_queued--; ifp->if_opackets++; sc->sc_tx_timer = 0; ifp->if_flags &= ~IFF_OACTIVE; uath_start(ifp); splx(s); } int uath_tx_data(struct uath_softc *sc, struct mbuf *m0, struct ieee80211_node *ni) { struct ieee80211com *ic = &sc->sc_ic; struct uath_tx_data *data; struct uath_tx_desc *desc; const struct ieee80211_frame *wh; int paylen, totlen, xferlen, error; data = &sc->tx_data[sc->data_idx]; desc = (struct uath_tx_desc *)(data->buf + sizeof (uint32_t)); data->ni = ni; #if NBPFILTER > 0 if (sc->sc_drvbpf != NULL) { struct mbuf mb; struct uath_tx_radiotap_header *tap = &sc->sc_txtap; tap->wt_flags = 0; tap->wt_chan_freq = htole16(ic->ic_bss->ni_chan->ic_freq); tap->wt_chan_flags = htole16(ic->ic_bss->ni_chan->ic_flags); mb.m_data = (caddr_t)tap; mb.m_len = sc->sc_txtap_len; mb.m_next = m0; mb.m_nextpkt = NULL; mb.m_type = 0; mb.m_flags = 0; bpf_mtap(sc->sc_drvbpf, &mb, BPF_DIRECTION_OUT); } #endif paylen = m0->m_pkthdr.len; xferlen = sizeof (uint32_t) + sizeof (struct uath_tx_desc) + paylen; wh = mtod(m0, struct ieee80211_frame *); if (wh->i_fc[1] & IEEE80211_FC1_WEP) { uint8_t *frm = (uint8_t *)(desc + 1); uint32_t iv; /* h/w WEP: it's up to the host to fill the IV field */ bcopy(wh, frm, sizeof (struct ieee80211_frame)); frm += sizeof (struct ieee80211_frame); /* insert IV: code copied from net80211 */ iv = (ic->ic_iv != 0) ? ic->ic_iv : arc4random(); if (iv >= 0x03ff00 && (iv & 0xf8ff00) == 0x00ff00) iv += 0x000100; ic->ic_iv = iv + 1; *frm++ = iv & 0xff; *frm++ = (iv >> 8) & 0xff; *frm++ = (iv >> 16) & 0xff; *frm++ = ic->ic_wep_txkey << 6; m_copydata(m0, sizeof (struct ieee80211_frame), m0->m_pkthdr.len - sizeof (struct ieee80211_frame), frm); paylen += IEEE80211_WEP_IVLEN + IEEE80211_WEP_KIDLEN; xferlen += IEEE80211_WEP_IVLEN + IEEE80211_WEP_KIDLEN; totlen = xferlen + IEEE80211_WEP_CRCLEN; } else { m_copydata(m0, 0, m0->m_pkthdr.len, (uint8_t *)(desc + 1)); totlen = xferlen; } /* fill Tx descriptor */ *(uint32_t *)data->buf = UATH_MAKECTL(1, xferlen - sizeof (uint32_t)); desc->len = htobe32(totlen); desc->priv = sc->data_idx; /* don't care about endianness */ desc->paylen = htobe32(paylen); desc->type = htobe32(UATH_TX_DATA); desc->flags = htobe32(0); if (IEEE80211_IS_MULTICAST(wh->i_addr1)) { desc->dest = htobe32(UATH_ID_BROADCAST); desc->magic = htobe32(3); } else { desc->dest = htobe32(UATH_ID_BSS); desc->magic = htobe32(1); } m_freem(m0); /* mbuf is no longer needed */ #ifdef UATH_DEBUG if (uath_debug >= 6) { printf("sending frame index=%u len=%d xferlen=%d", sc->data_idx, paylen, xferlen); uath_dump_cmd(data->buf, xferlen, '+'); } #endif usbd_setup_xfer(data->xfer, sc->data_tx_pipe, data, data->buf, xferlen, USBD_FORCE_SHORT_XFER | USBD_NO_COPY, UATH_DATA_TIMEOUT, uath_data_txeof); error = usbd_transfer(data->xfer); if (error != USBD_IN_PROGRESS && error != 0) { ic->ic_if.if_oerrors++; return error; } sc->data_idx = (sc->data_idx + 1) % UATH_TX_DATA_LIST_COUNT; sc->tx_queued++; return 0; } void uath_start(struct ifnet *ifp) { struct uath_softc *sc = ifp->if_softc; struct ieee80211com *ic = &sc->sc_ic; struct ieee80211_node *ni; struct mbuf *m0; /* * net80211 may still try to send management frames even if the * IFF_RUNNING flag is not set... */ if ((ifp->if_flags & (IFF_RUNNING | IFF_OACTIVE)) != IFF_RUNNING) return; for (;;) { IF_POLL(&ic->ic_mgtq, m0); if (m0 != NULL) { if (sc->tx_queued >= UATH_TX_DATA_LIST_COUNT) { ifp->if_flags |= IFF_OACTIVE; break; } IF_DEQUEUE(&ic->ic_mgtq, m0); ni = (struct ieee80211_node *)m0->m_pkthdr.rcvif; m0->m_pkthdr.rcvif = NULL; #if NBPFILTER > 0 if (ic->ic_rawbpf != NULL) bpf_mtap(ic->ic_rawbpf, m0, BPF_DIRECTION_OUT); #endif if (uath_tx_data(sc, m0, ni) != 0) break; } else { if (ic->ic_state != IEEE80211_S_RUN) break; IFQ_POLL(&ifp->if_snd, m0); if (m0 == NULL) break; if (sc->tx_queued >= UATH_TX_DATA_LIST_COUNT) { ifp->if_flags |= IFF_OACTIVE; break; } IFQ_DEQUEUE(&ifp->if_snd, m0); #if NBPFILTER > 0 if (ifp->if_bpf != NULL) bpf_mtap(ifp->if_bpf, m0, BPF_DIRECTION_OUT); #endif m0 = ieee80211_encap(ifp, m0, &ni); if (m0 == NULL) continue; #if NBPFILTER > 0 if (ic->ic_rawbpf != NULL) bpf_mtap(ic->ic_rawbpf, m0, BPF_DIRECTION_OUT); #endif if (uath_tx_data(sc, m0, ni) != 0) { if (ni != NULL) ieee80211_release_node(ic, ni); ifp->if_oerrors++; break; } } sc->sc_tx_timer = 5; ifp->if_timer = 1; } } void uath_watchdog(struct ifnet *ifp) { struct uath_softc *sc = ifp->if_softc; ifp->if_timer = 0; if (sc->sc_tx_timer > 0) { if (--sc->sc_tx_timer == 0) { printf("%s: device timeout\n", sc->sc_dev.dv_xname); /*uath_init(ifp); XXX needs a process context! */ ifp->if_oerrors++; return; } ifp->if_timer = 1; } ieee80211_watchdog(ifp); } int uath_ioctl(struct ifnet *ifp, u_long cmd, caddr_t data) { struct uath_softc *sc = ifp->if_softc; struct ieee80211com *ic = &sc->sc_ic; struct ifaddr *ifa; struct ifreq *ifr; int s, error = 0; s = splnet(); switch (cmd) { case SIOCSIFADDR: ifa = (struct ifaddr *)data; ifp->if_flags |= IFF_UP; #ifdef INET if (ifa->ifa_addr->sa_family == AF_INET) arp_ifinit(&ic->ic_ac, ifa); #endif /* FALLTHROUGH */ case SIOCSIFFLAGS: if (ifp->if_flags & IFF_UP) { if (!(ifp->if_flags & IFF_RUNNING)) uath_init(ifp); } else { if (ifp->if_flags & IFF_RUNNING) uath_stop(ifp, 1); } break; case SIOCADDMULTI: case SIOCDELMULTI: ifr = (struct ifreq *)data; error = (cmd == SIOCADDMULTI) ? ether_addmulti(ifr, &ic->ic_ac) : ether_delmulti(ifr, &ic->ic_ac); if (error == ENETRESET) error = 0; break; default: error = ieee80211_ioctl(ifp, cmd, data); } if (error == ENETRESET) { if ((ifp->if_flags & (IFF_UP | IFF_RUNNING)) == (IFF_UP | IFF_RUNNING)) uath_init(ifp); error = 0; } splx(s); return error; } int uath_query_eeprom(struct uath_softc *sc) { uint32_t tmp; int error; /* retrieve MAC address */ error = uath_read_eeprom(sc, UATH_EEPROM_MACADDR, sc->sc_ic.ic_myaddr); if (error != 0) { printf("%s: could not read MAC address\n", sc->sc_dev.dv_xname); return error; } /* retrieve the maximum frame size that the hardware can receive */ error = uath_read_eeprom(sc, UATH_EEPROM_RXBUFSZ, &tmp); if (error != 0) { printf("%s: could not read maximum Rx buffer size\n", sc->sc_dev.dv_xname); return error; } sc->rxbufsz = betoh32(tmp) & 0xfff; DPRINTF(("maximum Rx buffer size %d\n", sc->rxbufsz)); return 0; } int uath_reset(struct uath_softc *sc) { struct uath_cmd_setup setup; uint32_t reg, val; int s, error; /* init device with some voodoo incantations.. */ setup.magic1 = htobe32(1); setup.magic2 = htobe32(5); setup.magic3 = htobe32(200); setup.magic4 = htobe32(27); s = splusb(); error = uath_cmd_write(sc, UATH_CMD_SETUP, &setup, sizeof setup, UATH_CMD_FLAG_ASYNC); /* ..and wait until firmware notifies us that it is ready */ if (error == 0) error = tsleep(UATH_COND_INIT(sc), PCATCH, "uathinit", 5 * hz); splx(s); if (error != 0) return error; /* read PHY registers */ for (reg = 0x09; reg <= 0x24; reg++) { if (reg == 0x0b || reg == 0x0c) continue; DELAY(100); if ((error = uath_read_reg(sc, reg, &val)) != 0) return error; DPRINTFN(2, ("reg 0x%02x=0x%08x\n", reg, val)); } return error; } int uath_reset_tx_queues(struct uath_softc *sc) { int ac, error; for (ac = 0; ac < 4; ac++) { const uint32_t qid = htobe32(UATH_AC_TO_QID(ac)); DPRINTF(("resetting Tx queue %d\n", UATH_AC_TO_QID(ac))); error = uath_cmd_write(sc, UATH_CMD_RESET_QUEUE, &qid, sizeof qid, 0); if (error != 0) break; } return error; } int uath_wme_init(struct uath_softc *sc) { struct uath_qinfo qinfo; int ac, error; static const struct uath_wme_settings uath_wme_11g[4] = { { 7, 4, 10, 0, 0 }, /* Background */ { 3, 4, 10, 0, 0 }, /* Best-Effort */ { 3, 3, 4, 26, 0 }, /* Video */ { 2, 2, 3, 47, 0 } /* Voice */ }; bzero(&qinfo, sizeof qinfo); qinfo.size = htobe32(32); qinfo.magic1 = htobe32(1); /* XXX ack policy? */ qinfo.magic2 = htobe32(1); for (ac = 0; ac < 4; ac++) { qinfo.qid = htobe32(UATH_AC_TO_QID(ac)); qinfo.ac = htobe32(ac); qinfo.aifsn = htobe32(uath_wme_11g[ac].aifsn); qinfo.logcwmin = htobe32(uath_wme_11g[ac].logcwmin); qinfo.logcwmax = htobe32(uath_wme_11g[ac].logcwmax); qinfo.txop = htobe32(UATH_TXOP_TO_US( uath_wme_11g[ac].txop)); qinfo.acm = htobe32(uath_wme_11g[ac].acm); DPRINTF(("setting up Tx queue %d\n", UATH_AC_TO_QID(ac))); error = uath_cmd_write(sc, UATH_CMD_SET_QUEUE, &qinfo, sizeof qinfo, 0); if (error != 0) break; } return error; } int uath_set_chan(struct uath_softc *sc, struct ieee80211_channel *c) { struct uath_set_chan chan; bzero(&chan, sizeof chan); chan.flags = htobe32(0x1400); chan.freq = htobe32(c->ic_freq); chan.magic1 = htobe32(20); chan.magic2 = htobe32(50); chan.magic3 = htobe32(1); DPRINTF(("switching to channel %d\n", ieee80211_chan2ieee(&sc->sc_ic, c))); return uath_cmd_write(sc, UATH_CMD_SET_CHAN, &chan, sizeof chan, 0); } int uath_set_key(struct uath_softc *sc, const struct ieee80211_key *k, int index) { struct uath_cmd_crypto crypto; int i; bzero(&crypto, sizeof crypto); crypto.keyidx = htobe32(index); crypto.magic1 = htobe32(1); crypto.size = htobe32(368); crypto.mask = htobe32(0xffff); crypto.flags = htobe32(0x80000068); if (index != UATH_DEFAULT_KEY) crypto.flags |= htobe32(index << 16); memset(crypto.magic2, 0xff, sizeof crypto.magic2); /* * Each byte of the key must be XOR'ed with 10101010 before being * transmitted to the firmware. */ for (i = 0; i < k->k_len; i++) crypto.key[i] = k->k_key[i] ^ 0xaa; DPRINTF(("setting crypto key index=%d len=%d\n", index, k->k_len)); return uath_cmd_write(sc, UATH_CMD_CRYPTO, &crypto, sizeof crypto, 0); } int uath_set_keys(struct uath_softc *sc) { const struct ieee80211com *ic = &sc->sc_ic; int i, error; for (i = 0; i < IEEE80211_WEP_NKID; i++) { const struct ieee80211_key *k = &ic->ic_nw_keys[i]; if (k->k_len > 0 && (error = uath_set_key(sc, k, i)) != 0) return error; } return uath_set_key(sc, &ic->ic_nw_keys[ic->ic_wep_txkey], UATH_DEFAULT_KEY); } int uath_set_rates(struct uath_softc *sc, const struct ieee80211_rateset *rs) { struct uath_cmd_rates rates; bzero(&rates, sizeof rates); rates.magic1 = htobe32(0x02); rates.size = htobe32(1 + sizeof rates.rates); rates.nrates = rs->rs_nrates; bcopy(rs->rs_rates, rates.rates, rs->rs_nrates); DPRINTF(("setting supported rates nrates=%d\n", rs->rs_nrates)); return uath_cmd_write(sc, UATH_CMD_SET_RATES, &rates, sizeof rates, 0); } int uath_set_rxfilter(struct uath_softc *sc, uint32_t filter, uint32_t flags) { struct uath_cmd_filter rxfilter; rxfilter.filter = htobe32(filter); rxfilter.flags = htobe32(flags); DPRINTF(("setting Rx filter=0x%x flags=0x%x\n", filter, flags)); return uath_cmd_write(sc, UATH_CMD_SET_FILTER, &rxfilter, sizeof rxfilter, 0); } int uath_set_led(struct uath_softc *sc, int which, int on) { struct uath_cmd_led led; led.which = htobe32(which); led.state = htobe32(on ? UATH_LED_ON : UATH_LED_OFF); DPRINTFN(2, ("switching %s led %s\n", (which == UATH_LED_LINK) ? "link" : "activity", on ? "on" : "off")); return uath_cmd_write(sc, UATH_CMD_SET_LED, &led, sizeof led, 0); } int uath_switch_channel(struct uath_softc *sc, struct ieee80211_channel *c) { uint32_t val; int error; /* set radio frequency */ if ((error = uath_set_chan(sc, c)) != 0) { printf("%s: could not set channel\n", sc->sc_dev.dv_xname); return error; } /* reset Tx rings */ if ((error = uath_reset_tx_queues(sc)) != 0) { printf("%s: could not reset Tx queues\n", sc->sc_dev.dv_xname); return error; } /* set Tx rings WME properties */ if ((error = uath_wme_init(sc)) != 0) { printf("%s: could not init Tx queues\n", sc->sc_dev.dv_xname); return error; } val = htobe32(0); error = uath_cmd_write(sc, UATH_CMD_SET_STATE, &val, sizeof val, 0); if (error != 0) { printf("%s: could not set state\n", sc->sc_dev.dv_xname); return error; } return uath_tx_null(sc); } int uath_init(struct ifnet *ifp) { struct uath_softc *sc = ifp->if_softc; struct ieee80211com *ic = &sc->sc_ic; struct uath_cmd_31 cmd31; uint32_t val; int i, error; /* reset data and command rings */ sc->tx_queued = sc->data_idx = sc->cmd_idx = 0; val = htobe32(0); (void)uath_cmd_write(sc, UATH_CMD_02, &val, sizeof val, 0); /* set MAC address */ IEEE80211_ADDR_COPY(ic->ic_myaddr, LLADDR(ifp->if_sadl)); (void)uath_write_multi(sc, 0x13, ic->ic_myaddr, IEEE80211_ADDR_LEN); (void)uath_write_reg(sc, 0x02, 0x00000001); (void)uath_write_reg(sc, 0x0e, 0x0000003f); (void)uath_write_reg(sc, 0x10, 0x00000001); (void)uath_write_reg(sc, 0x06, 0x0000001e); /* * Queue Rx data xfers. */ for (i = 0; i < UATH_RX_DATA_LIST_COUNT; i++) { struct uath_rx_data *data = &sc->rx_data[i]; usbd_setup_xfer(data->xfer, sc->data_rx_pipe, data, data->buf, sc->rxbufsz, USBD_SHORT_XFER_OK, USBD_NO_TIMEOUT, uath_data_rxeof); error = usbd_transfer(data->xfer); if (error != USBD_IN_PROGRESS && error != 0) { printf("%s: could not queue Rx transfer\n", sc->sc_dev.dv_xname); goto fail; } } error = uath_cmd_read(sc, UATH_CMD_07, NULL, 0, &val, UATH_CMD_FLAG_MAGIC); if (error != 0) { printf("%s: could not send read command 07h\n", sc->sc_dev.dv_xname); goto fail; } DPRINTF(("command 07h return code: %x\n", betoh32(val))); /* set default channel */ ic->ic_bss->ni_chan = ic->ic_ibss_chan; if ((error = uath_set_chan(sc, ic->ic_bss->ni_chan)) != 0) { printf("%s: could not set channel\n", sc->sc_dev.dv_xname); goto fail; } if ((error = uath_wme_init(sc)) != 0) { printf("%s: could not setup WME parameters\n", sc->sc_dev.dv_xname); goto fail; } /* init MAC registers */ (void)uath_write_reg(sc, 0x19, 0x00000000); (void)uath_write_reg(sc, 0x1a, 0x0000003c); (void)uath_write_reg(sc, 0x1b, 0x0000003c); (void)uath_write_reg(sc, 0x1c, 0x00000000); (void)uath_write_reg(sc, 0x1e, 0x00000000); (void)uath_write_reg(sc, 0x1f, 0x00000003); (void)uath_write_reg(sc, 0x0c, 0x00000000); (void)uath_write_reg(sc, 0x0f, 0x00000002); (void)uath_write_reg(sc, 0x0a, 0x00000007); /* XXX retry? */ (void)uath_write_reg(sc, 0x09, ic->ic_rtsthreshold); val = htobe32(4); (void)uath_cmd_write(sc, UATH_CMD_27, &val, sizeof val, 0); (void)uath_cmd_write(sc, UATH_CMD_27, &val, sizeof val, 0); (void)uath_cmd_write(sc, UATH_CMD_1B, NULL, 0, 0); if ((error = uath_set_keys(sc)) != 0) { printf("%s: could not set crypto keys\n", sc->sc_dev.dv_xname); goto fail; } /* enable Rx */ (void)uath_set_rxfilter(sc, 0x0000, 4); (void)uath_set_rxfilter(sc, 0x0817, 1); cmd31.magic1 = htobe32(0xffffffff); cmd31.magic2 = htobe32(0xffffffff); (void)uath_cmd_write(sc, UATH_CMD_31, &cmd31, sizeof cmd31, 0); ifp->if_flags &= ~IFF_OACTIVE; ifp->if_flags |= IFF_RUNNING; if (ic->ic_opmode == IEEE80211_M_MONITOR) ieee80211_new_state(ic, IEEE80211_S_RUN, -1); else ieee80211_new_state(ic, IEEE80211_S_SCAN, -1); return 0; fail: uath_stop(ifp, 1); return error; } void uath_stop(struct ifnet *ifp, int disable) { struct uath_softc *sc = ifp->if_softc; struct ieee80211com *ic = &sc->sc_ic; uint32_t val; int s; s = splusb(); sc->sc_tx_timer = 0; ifp->if_timer = 0; ifp->if_flags &= ~(IFF_RUNNING | IFF_OACTIVE); ieee80211_new_state(ic, IEEE80211_S_INIT, -1); /* free all nodes */ val = htobe32(0); (void)uath_cmd_write(sc, UATH_CMD_SET_STATE, &val, sizeof val, 0); (void)uath_cmd_write(sc, UATH_CMD_RESET, NULL, 0, 0); val = htobe32(0); (void)uath_cmd_write(sc, UATH_CMD_15, &val, sizeof val, 0); #if 0 (void)uath_cmd_read(sc, UATH_CMD_SHUTDOWN, NULL, 0, NULL, UATH_CMD_FLAG_MAGIC); #endif /* abort any pending transfers */ usbd_abort_pipe(sc->data_tx_pipe); usbd_abort_pipe(sc->data_rx_pipe); usbd_abort_pipe(sc->cmd_tx_pipe); splx(s); } /* * Load the MIPS R4000 microcode into the device. Once the image is loaded, * the device will detach itself from the bus and reattach later with a new * product Id (a la ezusb). XXX this could also be implemented in userland * through /dev/ugen. */ int uath_loadfirmware(struct uath_softc *sc, const u_char *fw, int len) { struct usbd_xfer *ctlxfer, *txxfer, *rxxfer; struct uath_fwblock *txblock, *rxblock; uint8_t *txdata; int error = 0; if ((ctlxfer = usbd_alloc_xfer(sc->sc_udev)) == NULL) { printf("%s: could not allocate Tx control xfer\n", sc->sc_dev.dv_xname); error = USBD_NOMEM; goto fail1; } txblock = usbd_alloc_buffer(ctlxfer, sizeof (struct uath_fwblock)); if (txblock == NULL) { printf("%s: could not allocate Tx control block\n", sc->sc_dev.dv_xname); error = USBD_NOMEM; goto fail2; } if ((txxfer = usbd_alloc_xfer(sc->sc_udev)) == NULL) { printf("%s: could not allocate Tx xfer\n", sc->sc_dev.dv_xname); error = USBD_NOMEM; goto fail2; } txdata = usbd_alloc_buffer(txxfer, UATH_MAX_FWBLOCK_SIZE); if (txdata == NULL) { printf("%s: could not allocate Tx buffer\n", sc->sc_dev.dv_xname); error = USBD_NOMEM; goto fail3; } if ((rxxfer = usbd_alloc_xfer(sc->sc_udev)) == NULL) { printf("%s: could not allocate Rx control xfer\n", sc->sc_dev.dv_xname); error = USBD_NOMEM; goto fail3; } rxblock = usbd_alloc_buffer(rxxfer, sizeof (struct uath_fwblock)); if (rxblock == NULL) { printf("%s: could not allocate Rx control block\n", sc->sc_dev.dv_xname); error = USBD_NOMEM; goto fail4; } bzero(txblock, sizeof (struct uath_fwblock)); txblock->flags = htobe32(UATH_WRITE_BLOCK); txblock->total = htobe32(len); while (len > 0) { int mlen = min(len, UATH_MAX_FWBLOCK_SIZE); txblock->remain = htobe32(len - mlen); txblock->len = htobe32(mlen); DPRINTF(("sending firmware block: %d bytes remaining\n", len - mlen)); /* send firmware block meta-data */ usbd_setup_xfer(ctlxfer, sc->cmd_tx_pipe, sc, txblock, sizeof (struct uath_fwblock), USBD_NO_COPY | USBD_SYNCHRONOUS, UATH_CMD_TIMEOUT, NULL); if ((error = usbd_transfer(ctlxfer)) != 0) { printf("%s: could not send firmware block info\n", sc->sc_dev.dv_xname); break; } /* send firmware block data */ bcopy(fw, txdata, mlen); usbd_setup_xfer(txxfer, sc->data_tx_pipe, sc, txdata, mlen, USBD_NO_COPY | USBD_SYNCHRONOUS, UATH_DATA_TIMEOUT, NULL); if ((error = usbd_transfer(txxfer)) != 0) { printf("%s: could not send firmware block data\n", sc->sc_dev.dv_xname); break; } /* wait for ack from firmware */ usbd_setup_xfer(rxxfer, sc->cmd_rx_pipe, sc, rxblock, sizeof (struct uath_fwblock), USBD_SHORT_XFER_OK | USBD_NO_COPY | USBD_SYNCHRONOUS, UATH_CMD_TIMEOUT, NULL); if ((error = usbd_transfer(rxxfer)) != 0) { printf("%s: could not read firmware answer\n", sc->sc_dev.dv_xname); break; } DPRINTFN(2, ("rxblock flags=0x%x total=%d\n", betoh32(rxblock->flags), betoh32(rxblock->rxtotal))); fw += mlen; len -= mlen; } fail4: usbd_free_xfer(rxxfer); fail3: usbd_free_xfer(txxfer); fail2: usbd_free_xfer(ctlxfer); fail1: return error; } int uath_activate(struct device *self, int act) { struct uath_softc *sc = (struct uath_softc *)self; switch (act) { case DVACT_DEACTIVATE: usbd_deactivate(sc->sc_udev); break; } return 0; }