/* $OpenBSD: ubsa.c,v 1.14 2006/02/11 09:33:45 brad Exp $ */ /* $NetBSD: ubsa.c,v 1.5 2002/11/25 00:51:33 fvdl Exp $ */ /*- * Copyright (c) 2002, Alexander Kabaev . * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ /* * Copyright (c) 2001 The NetBSD Foundation, Inc. * All rights reserved. * * This code is derived from software contributed to The NetBSD Foundation * by Ichiro FUKUHARA (ichiro@ichiro.org). * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the NetBSD * Foundation, Inc. and its contributors. * 4. Neither the name of The NetBSD Foundation nor the names of its * contributors may be used to endorse or promote products derived * from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. */ #include #include #include #include #include #if defined(__OpenBSD__) #include #elif defined(__FreeBSD__) #include #endif #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #ifdef USB_DEBUG #define UBSA_DEBUG #endif #ifdef UBSA_DEBUG Static int ubsadebug = 0; #ifdef __FreeBSD__ SYSCTL_NODE(_hw_usb, OID_AUTO, ubsa, CTLFLAG_RW, 0, "USB ubsa"); SYSCTL_INT(_hw_usb_ubsa, OID_AUTO, debug, CTLFLAG_RW, &ubsadebug, 0, "ubsa debug level"); #endif #define DPRINTFN(n, x) do { if (ubsadebug > (n)) logprintf x; } while (0) #else #define DPRINTFN(n, x) #endif #define DPRINTF(x) DPRINTFN(0, x) #define UBSA_MODVER 1 /* module version */ #define UBSA_CONFIG_INDEX 1 #define UBSA_IFACE_INDEX 0 #define UBSA_INTR_INTERVAL 100 /* ms */ #define UBSA_SET_BAUDRATE 0x00 #define UBSA_SET_STOP_BITS 0x01 #define UBSA_SET_DATA_BITS 0x02 #define UBSA_SET_PARITY 0x03 #define UBSA_SET_DTR 0x0A #define UBSA_SET_RTS 0x0B #define UBSA_SET_BREAK 0x0C #define UBSA_SET_FLOW_CTRL 0x10 #define UBSA_PARITY_NONE 0x00 #define UBSA_PARITY_EVEN 0x01 #define UBSA_PARITY_ODD 0x02 #define UBSA_PARITY_MARK 0x03 #define UBSA_PARITY_SPACE 0x04 #define UBSA_FLOW_NONE 0x0000 #define UBSA_FLOW_OCTS 0x0001 #define UBSA_FLOW_ODSR 0x0002 #define UBSA_FLOW_IDSR 0x0004 #define UBSA_FLOW_IDTR 0x0008 #define UBSA_FLOW_IRTS 0x0010 #define UBSA_FLOW_ORTS 0x0020 #define UBSA_FLOW_UNKNOWN 0x0040 #define UBSA_FLOW_OXON 0x0080 #define UBSA_FLOW_IXON 0x0100 /* line status register */ #define UBSA_LSR_TSRE 0x40 /* Transmitter empty: byte sent */ #define UBSA_LSR_TXRDY 0x20 /* Transmitter buffer empty */ #define UBSA_LSR_BI 0x10 /* Break detected */ #define UBSA_LSR_FE 0x08 /* Framing error: bad stop bit */ #define UBSA_LSR_PE 0x04 /* Parity error */ #define UBSA_LSR_OE 0x02 /* Overrun, lost incoming byte */ #define UBSA_LSR_RXRDY 0x01 /* Byte ready in Receive Buffer */ #define UBSA_LSR_RCV_MASK 0x1f /* Mask for incoming data or error */ /* modem status register */ /* All deltas are from the last read of the MSR. */ #define UBSA_MSR_DCD 0x80 /* Current Data Carrier Detect */ #define UBSA_MSR_RI 0x40 /* Current Ring Indicator */ #define UBSA_MSR_DSR 0x20 /* Current Data Set Ready */ #define UBSA_MSR_CTS 0x10 /* Current Clear to Send */ #define UBSA_MSR_DDCD 0x08 /* DCD has changed state */ #define UBSA_MSR_TERI 0x04 /* RI has toggled low to high */ #define UBSA_MSR_DDSR 0x02 /* DSR has changed state */ #define UBSA_MSR_DCTS 0x01 /* CTS has changed state */ struct ubsa_softc { USBBASEDEVICE sc_dev; /* base device */ usbd_device_handle sc_udev; /* USB device */ usbd_interface_handle sc_iface; /* interface */ int sc_iface_number; /* interface number */ int sc_intr_number; /* interrupt number */ usbd_pipe_handle sc_intr_pipe; /* interrupt pipe */ u_char *sc_intr_buf; /* interrupt buffer */ int sc_isize; u_char sc_dtr; /* current DTR state */ u_char sc_rts; /* current RTS state */ u_char sc_lsr; /* Local status register */ u_char sc_msr; /* ubsa status register */ device_ptr_t sc_subdev; /* ucom device */ u_char sc_dying; /* disconnecting */ }; Static void ubsa_intr(usbd_xfer_handle, usbd_private_handle, usbd_status); Static void ubsa_get_status(void *, int, u_char *, u_char *); Static void ubsa_set(void *, int, int, int); Static int ubsa_param(void *, int, struct termios *); Static int ubsa_open(void *, int); Static void ubsa_close(void *, int); Static void ubsa_break(struct ubsa_softc *sc, int onoff); Static int ubsa_request(struct ubsa_softc *, u_int8_t, u_int16_t); Static void ubsa_dtr(struct ubsa_softc *, int); Static void ubsa_rts(struct ubsa_softc *, int); Static void ubsa_baudrate(struct ubsa_softc *, speed_t); Static void ubsa_parity(struct ubsa_softc *, tcflag_t); Static void ubsa_databits(struct ubsa_softc *, tcflag_t); Static void ubsa_stopbits(struct ubsa_softc *, tcflag_t); Static void ubsa_flow(struct ubsa_softc *, tcflag_t, tcflag_t); struct ucom_methods ubsa_methods = { ubsa_get_status, ubsa_set, ubsa_param, NULL, ubsa_open, ubsa_close, NULL, NULL }; Static const struct usb_devno ubsa_devs[] = { /* BELKIN F5U103 */ { USB_VENDOR_BELKIN, USB_PRODUCT_BELKIN_F5U103 }, /* BELKIN F5U120 */ { USB_VENDOR_BELKIN, USB_PRODUCT_BELKIN_F5U120 }, /* GoHubs GO-COM232 , Belkin F5U003 */ { USB_VENDOR_ETEK, USB_PRODUCT_ETEK_1COM }, /* GoHubs GO-COM232 */ { USB_VENDOR_GOHUBS, USB_PRODUCT_GOHUBS_GOCOM232 }, /* Peracom */ { USB_VENDOR_PERACOM, USB_PRODUCT_PERACOM_SERIAL1 }, /* Option Vodafone Mobile Connect 3G */ { USB_VENDOR_OPTION, USB_PRODUCT_OPTION_VODAFONEMC3G }, /* Option GlobeTrotter 3G FUSION */ { USB_VENDOR_OPTION, USB_PRODUCT_OPTION_GT3GFUSION }, /* Option GlobeTrotter 3G QUAD */ { USB_VENDOR_OPTION, USB_PRODUCT_OPTION_GT3GQUAD }, }; #define ubsa_lookup(v, p) usb_lookup(ubsa_devs, v, p) USB_DECLARE_DRIVER(ubsa); USB_MATCH(ubsa) { USB_MATCH_START(ubsa, uaa); if (uaa->iface != NULL) return (UMATCH_NONE); return (ubsa_lookup(uaa->vendor, uaa->product) != NULL ? UMATCH_VENDOR_PRODUCT : UMATCH_NONE); } USB_ATTACH(ubsa) { USB_ATTACH_START(ubsa, sc, uaa); usbd_device_handle dev = uaa->device; usb_config_descriptor_t *cdesc; usb_interface_descriptor_t *id; usb_endpoint_descriptor_t *ed; char *devinfop; const char *devname = USBDEVNAME(sc->sc_dev); usbd_status err; struct ucom_attach_args uca; int i; devinfop = usbd_devinfo_alloc(dev, 0); USB_ATTACH_SETUP; printf("%s: %s\n", devname, devinfop); usbd_devinfo_free(devinfop); sc->sc_udev = dev; /* * initialize rts, dtr variables to something * different from boolean 0, 1 */ sc->sc_dtr = -1; sc->sc_rts = -1; DPRINTF(("ubsa attach: sc = %p\n", sc)); /* initialize endpoints */ uca.bulkin = uca.bulkout = -1; sc->sc_intr_number = -1; sc->sc_intr_pipe = NULL; /* Move the device into the configured state. */ err = usbd_set_config_index(dev, UBSA_CONFIG_INDEX, 1); if (err) { printf("%s: failed to set configuration: %s\n", devname, usbd_errstr(err)); sc->sc_dying = 1; goto error; } /* get the config descriptor */ cdesc = usbd_get_config_descriptor(sc->sc_udev); if (cdesc == NULL) { printf("%s: failed to get configuration descriptor\n", devname); sc->sc_dying = 1; goto error; } /* get the first interface */ err = usbd_device2interface_handle(dev, UBSA_IFACE_INDEX, &sc->sc_iface); if (err) { printf("%s: failed to get interface: %s\n", devname, usbd_errstr(err)); sc->sc_dying = 1; goto error; } /* Find the endpoints */ id = usbd_get_interface_descriptor(sc->sc_iface); sc->sc_iface_number = id->bInterfaceNumber; for (i = 0; i < id->bNumEndpoints; i++) { ed = usbd_interface2endpoint_descriptor(sc->sc_iface, i); if (ed == NULL) { printf("%s: no endpoint descriptor for %d\n", USBDEVNAME(sc->sc_dev), i); sc->sc_dying = 1; goto error; } if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_IN && UE_GET_XFERTYPE(ed->bmAttributes) == UE_INTERRUPT) { sc->sc_intr_number = ed->bEndpointAddress; sc->sc_isize = UGETW(ed->wMaxPacketSize); } else if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_IN && UE_GET_XFERTYPE(ed->bmAttributes) == UE_BULK) { uca.bulkin = ed->bEndpointAddress; uca.ibufsize = UGETW(ed->wMaxPacketSize); } else if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_OUT && UE_GET_XFERTYPE(ed->bmAttributes) == UE_BULK) { uca.bulkout = ed->bEndpointAddress; uca.obufsize = UGETW(ed->wMaxPacketSize); } } if (sc->sc_intr_number == -1) { printf("%s: Could not find interrupt in\n", devname); sc->sc_dying = 1; goto error; } if (uca.bulkin == -1) { printf("%s: Could not find data bulk in\n", devname); sc->sc_dying = 1; goto error; } if (uca.bulkout == -1) { printf("%s: Could not find data bulk out\n", devname); sc->sc_dying = 1; goto error; } uca.portno = UCOM_UNK_PORTNO; /* bulkin, bulkout set above */ uca.ibufsizepad = uca.ibufsize; uca.opkthdrlen = 0; uca.device = dev; uca.iface = sc->sc_iface; uca.methods = &ubsa_methods; uca.arg = sc; uca.info = NULL; usbd_add_drv_event(USB_EVENT_DRIVER_ATTACH, sc->sc_udev, USBDEV(sc->sc_dev)); DPRINTF(("ubsa: in = 0x%x, out = 0x%x, intr = 0x%x\n", uca.bulkin, uca.bulkout, sc->sc_intr_number)); sc->sc_subdev = config_found_sm(self, &uca, ucomprint, ucomsubmatch); USB_ATTACH_SUCCESS_RETURN; error: USB_ATTACH_ERROR_RETURN; } USB_DETACH(ubsa) { USB_DETACH_START(ubsa, sc); int rv = 0; DPRINTF(("ubsa_detach: sc = %p\n", sc)); if (sc->sc_intr_pipe != NULL) { usbd_abort_pipe(sc->sc_intr_pipe); usbd_close_pipe(sc->sc_intr_pipe); free(sc->sc_intr_buf, M_USBDEV); sc->sc_intr_pipe = NULL; } sc->sc_dying = 1; if (sc->sc_subdev != NULL) { rv = config_detach(sc->sc_subdev, flags); sc->sc_subdev = NULL; } usbd_add_drv_event(USB_EVENT_DRIVER_DETACH, sc->sc_udev, USBDEV(sc->sc_dev)); return (rv); } int ubsa_activate(device_ptr_t self, enum devact act) { struct ubsa_softc *sc = (struct ubsa_softc *)self; int rv = 0; switch (act) { case DVACT_ACTIVATE: return (EOPNOTSUPP); case DVACT_DEACTIVATE: if (sc->sc_subdev != NULL) rv = config_deactivate(sc->sc_subdev); sc->sc_dying = 1; break; } return (rv); } Static int ubsa_request(struct ubsa_softc *sc, u_int8_t request, u_int16_t value) { usb_device_request_t req; usbd_status err; req.bmRequestType = UT_WRITE_VENDOR_DEVICE; req.bRequest = request; USETW(req.wValue, value); USETW(req.wIndex, sc->sc_iface_number); USETW(req.wLength, 0); err = usbd_do_request(sc->sc_udev, &req, 0); if (err && err != USBD_STALLED) printf("%s: ubsa_request: %s\n", USBDEVNAME(sc->sc_dev), usbd_errstr(err)); return (err); } Static void ubsa_dtr(struct ubsa_softc *sc, int onoff) { DPRINTF(("ubsa_dtr: onoff = %d\n", onoff)); if (sc->sc_dtr == onoff) return; sc->sc_dtr = onoff; ubsa_request(sc, UBSA_SET_DTR, onoff ? 1 : 0); } Static void ubsa_rts(struct ubsa_softc *sc, int onoff) { DPRINTF(("ubsa_rts: onoff = %d\n", onoff)); if (sc->sc_rts == onoff) return; sc->sc_rts = onoff; ubsa_request(sc, UBSA_SET_RTS, onoff ? 1 : 0); } Static void ubsa_break(struct ubsa_softc *sc, int onoff) { DPRINTF(("ubsa_rts: onoff = %d\n", onoff)); ubsa_request(sc, UBSA_SET_BREAK, onoff ? 1 : 0); } Static void ubsa_set(void *addr, int portno, int reg, int onoff) { struct ubsa_softc *sc; sc = addr; switch (reg) { case UCOM_SET_DTR: ubsa_dtr(sc, onoff); break; case UCOM_SET_RTS: ubsa_rts(sc, onoff); break; case UCOM_SET_BREAK: ubsa_break(sc, onoff); break; default: break; } } Static void ubsa_baudrate(struct ubsa_softc *sc, speed_t speed) { u_int16_t value = 0; DPRINTF(("ubsa_baudrate: speed = %d\n", speed)); switch(speed) { case B0: break; case B300: case B600: case B1200: case B2400: case B4800: case B9600: case B19200: case B38400: case B57600: case B115200: case B230400: value = B230400 / speed; break; default: DPRINTF(("%s: ubsa_param: unsupported baudrate, " "forcing default of 9600\n", USBDEVNAME(sc->sc_dev))); value = B230400 / B9600; break; }; if (speed == B0) { ubsa_flow(sc, 0, 0); ubsa_dtr(sc, 0); ubsa_rts(sc, 0); } else ubsa_request(sc, UBSA_SET_BAUDRATE, value); } Static void ubsa_parity(struct ubsa_softc *sc, tcflag_t cflag) { int value; DPRINTF(("ubsa_parity: cflag = 0x%x\n", cflag)); if (cflag & PARENB) value = (cflag & PARODD) ? UBSA_PARITY_ODD : UBSA_PARITY_EVEN; else value = UBSA_PARITY_NONE; ubsa_request(sc, UBSA_SET_PARITY, value); } Static void ubsa_databits(struct ubsa_softc *sc, tcflag_t cflag) { int value; DPRINTF(("ubsa_databits: cflag = 0x%x\n", cflag)); switch (cflag & CSIZE) { case CS5: value = 0; break; case CS6: value = 1; break; case CS7: value = 2; break; case CS8: value = 3; break; default: DPRINTF(("%s: ubsa_param: unsupported databits requested, " "forcing default of 8\n", USBDEVNAME(sc->sc_dev))); value = 3; } ubsa_request(sc, UBSA_SET_DATA_BITS, value); } Static void ubsa_stopbits(struct ubsa_softc *sc, tcflag_t cflag) { int value; DPRINTF(("ubsa_stopbits: cflag = 0x%x\n", cflag)); value = (cflag & CSTOPB) ? 1 : 0; ubsa_request(sc, UBSA_SET_STOP_BITS, value); } Static void ubsa_flow(struct ubsa_softc *sc, tcflag_t cflag, tcflag_t iflag) { int value; DPRINTF(("ubsa_flow: cflag = 0x%x, iflag = 0x%x\n", cflag, iflag)); value = 0; if (cflag & CRTSCTS) value |= UBSA_FLOW_OCTS | UBSA_FLOW_IRTS; if (iflag & (IXON|IXOFF)) value |= UBSA_FLOW_OXON | UBSA_FLOW_IXON; ubsa_request(sc, UBSA_SET_FLOW_CTRL, value); } Static int ubsa_param(void *addr, int portno, struct termios *ti) { struct ubsa_softc *sc = addr; DPRINTF(("ubsa_param: sc = %p\n", sc)); ubsa_baudrate(sc, ti->c_ospeed); ubsa_parity(sc, ti->c_cflag); ubsa_databits(sc, ti->c_cflag); ubsa_stopbits(sc, ti->c_cflag); ubsa_flow(sc, ti->c_cflag, ti->c_iflag); return (0); } Static int ubsa_open(void *addr, int portno) { struct ubsa_softc *sc = addr; int err; if (sc->sc_dying) return (ENXIO); DPRINTF(("ubsa_open: sc = %p\n", sc)); if (sc->sc_intr_number != -1 && sc->sc_intr_pipe == NULL) { sc->sc_intr_buf = malloc(sc->sc_isize, M_USBDEV, M_WAITOK); err = usbd_open_pipe_intr(sc->sc_iface, sc->sc_intr_number, USBD_SHORT_XFER_OK, &sc->sc_intr_pipe, sc, sc->sc_intr_buf, sc->sc_isize, ubsa_intr, UBSA_INTR_INTERVAL); if (err) { printf("%s: cannot open interrupt pipe (addr %d)\n", USBDEVNAME(sc->sc_dev), sc->sc_intr_number); return (EIO); } } return (0); } Static void ubsa_close(void *addr, int portno) { struct ubsa_softc *sc = addr; int err; if (sc->sc_dying) return; DPRINTF(("ubsa_close: close\n")); if (sc->sc_intr_pipe != NULL) { err = usbd_abort_pipe(sc->sc_intr_pipe); if (err) printf("%s: abort interrupt pipe failed: %s\n", USBDEVNAME(sc->sc_dev), usbd_errstr(err)); err = usbd_close_pipe(sc->sc_intr_pipe); if (err) printf("%s: close interrupt pipe failed: %s\n", USBDEVNAME(sc->sc_dev), usbd_errstr(err)); free(sc->sc_intr_buf, M_USBDEV); sc->sc_intr_pipe = NULL; } } Static void ubsa_intr(usbd_xfer_handle xfer, usbd_private_handle priv, usbd_status status) { struct ubsa_softc *sc = priv; u_char *buf; buf = sc->sc_intr_buf; if (sc->sc_dying) return; if (status != USBD_NORMAL_COMPLETION) { if (status == USBD_NOT_STARTED || status == USBD_CANCELLED) return; DPRINTF(("%s: ubsa_intr: abnormal status: %s\n", USBDEVNAME(sc->sc_dev), usbd_errstr(status))); usbd_clear_endpoint_stall_async(sc->sc_intr_pipe); return; } /* incidentally, Belkin adapter status bits match UART 16550 bits */ sc->sc_lsr = buf[2]; sc->sc_msr = buf[3]; DPRINTF(("%s: ubsa lsr = 0x%02x, msr = 0x%02x\n", USBDEVNAME(sc->sc_dev), sc->sc_lsr, sc->sc_msr)); ucom_status_change((struct ucom_softc *)sc->sc_subdev); } Static void ubsa_get_status(void *addr, int portno, u_char *lsr, u_char *msr) { struct ubsa_softc *sc = addr; DPRINTF(("ubsa_get_status\n")); if (lsr != NULL) *lsr = sc->sc_lsr; if (msr != NULL) *msr = sc->sc_msr; }