/* $OpenBSD: umbg.c,v 1.7 2008/09/10 14:01:23 blambert Exp $ */ /* * Copyright (c) 2007 Marc Balmer * * Permission to use, copy, modify, and distribute this software for any * purpose with or without fee is hereby granted, provided that the above * copyright notice and this permission notice appear in all copies. * * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #ifdef UMBG_DEBUG #define DPRINTFN(n, x) do { if (umbgdebug > (n)) printf x; } while (0) int umbgdebug = 0; #else #define DPRINTFN(n, x) #endif #define DPRINTF(x) DPRINTFN(0, x) #ifdef UMBG_DEBUG #define TRUSTTIME ((long) 60) #else #define TRUSTTIME ((long) 12 * 60 * 60) /* degrade OK > WARN > CRIT */ #endif struct umbg_softc { struct device sc_dev; /* base device */ usbd_device_handle sc_udev; /* USB device */ usbd_interface_handle sc_iface; /* data interface */ u_char sc_dying; /* disconnecting */ int sc_bulkin_no; usbd_pipe_handle sc_bulkin_pipe; int sc_bulkout_no; usbd_pipe_handle sc_bulkout_pipe; struct timeout sc_to; /* get time from device */ struct usb_task sc_task; struct timeout sc_it_to; /* invalidate sensor */ usb_device_request_t sc_req; struct ksensor sc_timedelta; /* timedelta */ struct ksensor sc_signal; /* signal quality and status */ struct ksensordev sc_sensordev; }; struct mbg_time { u_int8_t hundreds; u_int8_t sec; u_int8_t min; u_int8_t hour; u_int8_t mday; u_int8_t wday; /* 1 (monday) - 7 (sunday) */ u_int8_t mon; u_int8_t year; /* 0 - 99 */ u_int8_t status; u_int8_t signal; int8_t utc_off; }; struct mbg_time_hr { u_int32_t sec; /* always UTC */ u_int32_t frac; /* fractions of second */ int32_t utc_off; /* informal only, in seconds */ u_int16_t status; u_int8_t signal; }; /* mbg_time.status bits */ #define MBG_FREERUN 0x01 /* clock running on xtal */ #define MBG_DST_ENA 0x02 /* DST enabled */ #define MBG_SYNC 0x04 /* clock synced at least once */ #define MBG_DST_CHG 0x08 /* DST change announcement */ #define MBG_UTC 0x10 /* special UTC firmware is installed */ #define MBG_LEAP 0x20 /* announcement of a leap second */ #define MBG_IFTM 0x40 /* current time was set from host */ #define MBG_INVALID 0x80 /* time invalid, batt. was disconn. */ /* commands */ #define MBG_GET_TIME 0x00 #define MBG_GET_SYNC_TIME 0x02 #define MBG_GET_TIME_HR 0x03 #define MBG_SET_TIME 0x10 #define MBG_GET_TZCODE 0x32 #define MBG_SET_TZCODE 0x33 #define MBG_GET_FW_ID_1 0x40 #define MBG_GET_FW_ID_2 0x41 #define MBG_GET_SERNUM 0x42 /* timezone codes (for MBG_{GET|SET}_TZCODE) */ #define MBG_TZCODE_CET_CEST 0x00 #define MBG_TZCODE_CET 0x01 #define MBG_TZCODE_UTC 0x02 #define MBG_TZCODE_EET_EEST 0x03 /* misc. constants */ #define MBG_FIFO_LEN 16 #define MBG_ID_LEN (2 * MBG_FIFO_LEN + 1) #define MBG_BUSY 0x01 #define MBG_SIG_BIAS 55 #define MBG_SIG_MAX 68 #define NSECPERSEC 1000000000LL /* nanoseconds per second */ #define HRDIVISOR 0x100000000LL /* for hi-res timestamp */ static int t_wait, t_trust; void umbg_intr(void *); void umbg_it_intr(void *); int umbg_match(struct device *, void *, void *); void umbg_attach(struct device *, struct device *, void *); int umbg_detach(struct device *, int); int umbg_activate(struct device *, enum devact); void umbg_task(void *); int umbg_read(struct umbg_softc *, u_int8_t cmd, char *buf, size_t len, struct timespec *tstamp); struct cfdriver umbg_cd = { NULL, "umbg", DV_DULL }; const struct cfattach umbg_ca = { sizeof(struct umbg_softc), umbg_match, umbg_attach, umbg_detach, umbg_activate, }; int umbg_match(struct device *parent, void *match, void *aux) { struct usb_attach_arg *uaa = aux; if (uaa->iface != NULL) return UMATCH_NONE; return uaa->vendor == USB_VENDOR_MEINBERG && uaa->product == USB_PRODUCT_MEINBERG_USB5131 ? UMATCH_VENDOR_PRODUCT : UMATCH_NONE; } void umbg_attach(struct device *parent, struct device *self, void *aux) { struct umbg_softc *sc = (struct umbg_softc *)self; struct usb_attach_arg *uaa = aux; usbd_device_handle dev = uaa->device; usbd_interface_handle iface = uaa->iface; struct mbg_time tframe; usb_endpoint_descriptor_t *ed; usbd_status err; int signal; #ifdef UMBG_DEBUG char fw_id[MBG_ID_LEN]; #endif sc->sc_udev = dev; strlcpy(sc->sc_sensordev.xname, sc->sc_dev.dv_xname, sizeof(sc->sc_sensordev.xname)); sc->sc_timedelta.type = SENSOR_TIMEDELTA; sc->sc_timedelta.status = SENSOR_S_UNKNOWN; sc->sc_timedelta.value = 0LL; sc->sc_timedelta.flags = 0; strlcpy(sc->sc_timedelta.desc, "USB5131", sizeof(sc->sc_timedelta.desc)); sensor_attach(&sc->sc_sensordev, &sc->sc_timedelta); sc->sc_signal.type = SENSOR_PERCENT; sc->sc_signal.value = 0LL; sc->sc_signal.flags = 0; strlcpy(sc->sc_signal.desc, "Signal", sizeof(sc->sc_signal.desc)); sensor_attach(&sc->sc_sensordev, &sc->sc_signal); sensordev_install(&sc->sc_sensordev); usb_init_task(&sc->sc_task, umbg_task, sc); timeout_set(&sc->sc_to, umbg_intr, sc); timeout_set(&sc->sc_it_to, umbg_it_intr, sc); if ((err = usbd_set_config_index(dev, 0, 1))) { printf("%s: failed to set configuration, err=%s\n", sc->sc_dev.dv_xname, usbd_errstr(err)); goto fishy; } if ((err = usbd_device2interface_handle(dev, 0, &iface))) { printf("%s: failed to get interface, err=%s\n", sc->sc_dev.dv_xname, usbd_errstr(err)); goto fishy; } ed = usbd_interface2endpoint_descriptor(iface, 0); sc->sc_bulkin_no = ed->bEndpointAddress; ed = usbd_interface2endpoint_descriptor(iface, 1); sc->sc_bulkout_no = ed->bEndpointAddress; sc->sc_iface = iface; err = usbd_open_pipe(sc->sc_iface, sc->sc_bulkin_no, USBD_EXCLUSIVE_USE, &sc->sc_bulkin_pipe); if (err) { printf("%s: open rx pipe failed: %s\n", sc->sc_dev.dv_xname, usbd_errstr(err)); goto fishy; } err = usbd_open_pipe(sc->sc_iface, sc->sc_bulkout_no, USBD_EXCLUSIVE_USE, &sc->sc_bulkout_pipe); if (err) { printf("%s: open tx pipe failed: %s\n", sc->sc_dev.dv_xname, usbd_errstr(err)); goto fishy; } printf("%s: ", sc->sc_dev.dv_xname); if (umbg_read(sc, MBG_GET_TIME, (char *)&tframe, sizeof(struct mbg_time), NULL)) { sc->sc_signal.status = SENSOR_S_CRIT; printf("unknown status"); } else { sc->sc_signal.status = SENSOR_S_OK; signal = tframe.signal - MBG_SIG_BIAS; if (signal < 0) signal = 0; else if (signal > MBG_SIG_MAX) signal = MBG_SIG_MAX; sc->sc_signal.value = signal; if (tframe.status & MBG_SYNC) printf("synchronized"); else printf("not synchronized"); if (tframe.status & MBG_FREERUN) { sc->sc_signal.status = SENSOR_S_WARN; printf(", freerun"); } if (tframe.status & MBG_IFTM) printf(", time set from host"); } #ifdef UMBG_DEBUG if (umbg_read(sc, MBG_GET_FW_ID_1, fw_id, MBG_FIFO_LEN, NULL) || umbg_read(sc, MBG_GET_FW_ID_2, &fw_id[MBG_FIFO_LEN], MBG_FIFO_LEN, NULL)) printf(", firmware unknown"); else { fw_id[MBG_ID_LEN - 1] = '\0'; printf(", firmware %s", fw_id); } #endif printf("\n"); usbd_add_drv_event(USB_EVENT_DRIVER_ATTACH, sc->sc_udev, &sc->sc_dev); t_wait = 5; t_trust = TRUSTTIME; usb_add_task(sc->sc_udev, &sc->sc_task); return; fishy: sc->sc_dying = 1; } int umbg_detach(struct device *self, int flags) { struct umbg_softc *sc = (struct umbg_softc *)self; usbd_status err; sc->sc_dying = 1; timeout_del(&sc->sc_to); timeout_del(&sc->sc_it_to); if (sc->sc_bulkin_pipe != NULL) { err = usbd_abort_pipe(sc->sc_bulkin_pipe); if (err) printf("%s: abort rx pipe failed: %s\n", sc->sc_dev.dv_xname, usbd_errstr(err)); err = usbd_close_pipe(sc->sc_bulkin_pipe); if (err) printf("%s: close rx pipe failed: %s\n", sc->sc_dev.dv_xname, usbd_errstr(err)); sc->sc_bulkin_pipe = NULL; } if (sc->sc_bulkout_pipe != NULL) { err = usbd_abort_pipe(sc->sc_bulkout_pipe); if (err) printf("%s: abort tx pipe failed: %s\n", sc->sc_dev.dv_xname, usbd_errstr(err)); err = usbd_close_pipe(sc->sc_bulkout_pipe); if (err) printf("%s: close tx pipe failed: %s\n", sc->sc_dev.dv_xname, usbd_errstr(err)); sc->sc_bulkout_pipe = NULL; } usb_rem_task(sc->sc_udev, &sc->sc_task); /* Unregister the clock with the kernel */ sensordev_deinstall(&sc->sc_sensordev); usbd_add_drv_event(USB_EVENT_DRIVER_DETACH, sc->sc_udev, &sc->sc_dev); return 0; } void umbg_intr(void *xsc) { struct umbg_softc *sc = xsc; usb_add_task(sc->sc_udev, &sc->sc_task); } /* umbg_task_hr() read a high resolution timestamp from the device. */ void umbg_task(void *arg) { struct umbg_softc *sc = (struct umbg_softc *)arg; struct mbg_time_hr tframe; struct timespec tstamp; int64_t tlocal, trecv; int signal; if (sc->sc_dying) return; if (umbg_read(sc, MBG_GET_TIME_HR, (char *)&tframe, sizeof(tframe), &tstamp)) { sc->sc_signal.status = SENSOR_S_CRIT; goto bail_out; } if (tframe.status & MBG_INVALID) { sc->sc_signal.status = SENSOR_S_CRIT; goto bail_out; } tlocal = tstamp.tv_sec * NSECPERSEC + tstamp.tv_nsec; trecv = letoh32(tframe.sec) * NSECPERSEC + (letoh32(tframe.frac) * NSECPERSEC >> 32); sc->sc_timedelta.value = tlocal - trecv; if (sc->sc_timedelta.status == SENSOR_S_UNKNOWN || !(letoh16(tframe.status) & MBG_FREERUN)) { sc->sc_timedelta.status = SENSOR_S_OK; timeout_add_sec(&sc->sc_it_to, t_trust); } sc->sc_timedelta.tv.tv_sec = tstamp.tv_sec; sc->sc_timedelta.tv.tv_usec = tstamp.tv_nsec / 1000; signal = tframe.signal - MBG_SIG_BIAS; if (signal < 0) signal = 0; else if (signal > MBG_SIG_MAX) signal = MBG_SIG_MAX; sc->sc_signal.value = signal * 100000 / MBG_SIG_MAX; sc->sc_signal.status = letoh16(tframe.status) & MBG_FREERUN ? SENSOR_S_WARN : SENSOR_S_OK; sc->sc_signal.tv.tv_sec = sc->sc_timedelta.tv.tv_sec; sc->sc_signal.tv.tv_usec = sc->sc_timedelta.tv.tv_usec; bail_out: timeout_add_sec(&sc->sc_to, t_wait); } /* send a command and read back results */ int umbg_read(struct umbg_softc *sc, u_int8_t cmd, char *buf, size_t len, struct timespec *tstamp) { usbd_status err; usbd_xfer_handle xfer; xfer = usbd_alloc_xfer(sc->sc_udev); if (xfer == NULL) { DPRINTF(("%s: alloc xfer failed\n", sc->sc_dev.dv_xname)); return -1; } usbd_setup_xfer(xfer, sc->sc_bulkout_pipe, NULL, &cmd, sizeof(cmd), USBD_SHORT_XFER_OK, USBD_DEFAULT_TIMEOUT, NULL); if (tstamp) nanotime(tstamp); err = usbd_sync_transfer(xfer); if (err) { DPRINTF(("%s: sending of command failed: %s\n", sc->sc_dev.dv_xname, usbd_errstr(err))); usbd_free_xfer(xfer); return -1; } usbd_setup_xfer(xfer, sc->sc_bulkin_pipe, NULL, buf, len, USBD_SHORT_XFER_OK, USBD_DEFAULT_TIMEOUT, NULL); err = usbd_sync_transfer(xfer); usbd_free_xfer(xfer); if (err) { DPRINTF(("%s: reading data failed: %s\n", sc->sc_dev.dv_xname, usbd_errstr(err))); return -1; } return 0; } void umbg_it_intr(void *xsc) { struct umbg_softc *sc = xsc; if (sc->sc_dying) return; if (sc->sc_timedelta.status == SENSOR_S_OK) { sc->sc_timedelta.status = SENSOR_S_WARN; /* * further degrade in TRUSTTIME seconds if the clocks remains * free running. */ timeout_add_sec(&sc->sc_it_to, t_trust); } else sc->sc_timedelta.status = SENSOR_S_CRIT; } int umbg_activate(struct device *self, enum devact act) { struct umbg_softc *sc = (struct umbg_softc *)self; switch (act) { case DVACT_ACTIVATE: break; case DVACT_DEACTIVATE: sc->sc_dying = 1; break; } return 0; }