/* $OpenBSD: uoakrh.c,v 1.14 2016/03/11 18:41:33 mmcc Exp $ */ /* * Copyright (c) 2012 Yojiro UO * * Permission to use, copy, modify, and distribute this software for any * purpose with or without fee is hereby granted, provided that the above * copyright notice and this permission notice appear in all copies. * * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCAIMS ALL WARRANTIES * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. */ /* TORADEX OAK seriese sensors: Temperature/Humidity sensor driver */ /* http://developer.toradex.com/files/toradex-dev/uploads/media/Oak/Oak_ProgrammingGuide.pdf */ #include #include #include #include #include #include #include #include #include #include #include #include #include "uoak.h" #ifdef OARKRH_DEBUG int uoakrhdebug = 0; #define DPRINTFN(n, x) do { if (uoakrhdebug > (n)) printf x; } while (0) #else #define DPRINTFN(n, x) #endif #define DPRINTF(x) DPRINTFN(0, x) #define UOAKRH_SAMPLE_RATE 200 /* ms */ #define UOAKRH_REFRESH_PERIOD 10 /* 10 sec : 0.1Hz */ struct uoakrh_sensor { struct ksensor temp; struct ksensor humi; int count; int tempval, humival; int resolution; }; struct uoakrh_softc { struct uhidev sc_hdev; /* uoak common */ struct uoak_softc sc_uoak_softc; /* sensor framework */ struct uoakrh_sensor sc_sensor; struct ksensordev sc_sensordev; struct sensor_task *sc_sensortask; /* sensor setting */ int sc_rh_heater; }; const struct usb_devno uoakrh_devs[] = { { USB_VENDOR_TORADEX, USB_PRODUCT_TORADEX_RH}, }; #define uoakrh_lookup(v, p) usb_lookup(uoakrh_devs, v, p) int uoakrh_match(struct device *, void *, void *); void uoakrh_attach(struct device *, struct device *, void *); int uoakrh_detach(struct device *, int); void uoakrh_intr(struct uhidev *, void *, u_int); void uoakrh_refresh(void *); int uoakrh_get_sensor_setting(struct uoakrh_softc *, enum uoak_target); void uoakrh_dev_setting(void *, enum uoak_target); void uoakrh_dev_print(void *, enum uoak_target); struct cfdriver uoakrh_cd = { NULL, "uoakrh", DV_DULL }; const struct cfattach uoakrh_ca = { sizeof(struct uoakrh_softc), uoakrh_match, uoakrh_attach, uoakrh_detach, }; struct uoak_methods uoakrh_methods = { uoakrh_dev_print, uoakrh_dev_setting }; int uoakrh_match(struct device *parent, void *match, void *aux) { struct uhidev_attach_arg *uha = aux; if (uha->reportid == UHIDEV_CLAIM_ALLREPORTID) return (UMATCH_NONE); if (uoakrh_lookup(uha->uaa->vendor, uha->uaa->product) == NULL) return UMATCH_NONE; return (UMATCH_VENDOR_PRODUCT); } void uoakrh_attach(struct device *parent, struct device *self, void *aux) { struct uoakrh_softc *sc = (struct uoakrh_softc *)self; struct usb_attach_arg *uaa = aux; struct uhidev_attach_arg *uha = (struct uhidev_attach_arg *)uaa; struct usbd_device *dev = uha->parent->sc_udev; struct uoak_softc *scc = &sc->sc_uoak_softc; int err, size, repid; void *desc; sc->sc_hdev.sc_intr = uoakrh_intr; sc->sc_hdev.sc_parent = uha->parent; sc->sc_hdev.sc_report_id = uha->reportid; scc->sc_parent = sc; scc->sc_udev = dev; scc->sc_hdev = &sc->sc_hdev; scc->sc_methods = &uoakrh_methods; scc->sc_sensordev = &sc->sc_sensordev; uhidev_get_report_desc(uha->parent, &desc, &size); repid = uha->reportid; scc->sc_ilen = hid_report_size(desc, size, hid_input, repid); scc->sc_olen = hid_report_size(desc, size, hid_output, repid); scc->sc_flen = hid_report_size(desc, size, hid_feature, repid); /* device initialize */ (void)uoak_led_ctrl(scc, OAK_TARGET_RAM, OAK_LED_ON); err = uoak_set_sample_rate(scc, OAK_TARGET_RAM, UOAKRH_SAMPLE_RATE); if (err) { printf("%s: could not set sampling rate. exit\n", sc->sc_hdev.sc_dev.dv_xname); return; } /* query and print device setting */ uoak_get_devinfo(scc); uoak_print_devinfo(scc); DPRINTF((" config in RAM\n")); uoak_get_setting(scc, OAK_TARGET_RAM); uoak_print_setting(scc, OAK_TARGET_RAM); #ifdef UOAKV_DEBUG DPRINTF((" config in FLASH\n")); uoak_get_setting(scc, OAK_TARGET_FLASH); uoak_print_setting(scc, OAK_TARGET_FLASH); #endif /* attach sensor */ strlcpy(sc->sc_sensordev.xname, sc->sc_hdev.sc_dev.dv_xname, sizeof(sc->sc_sensordev.xname)); sc->sc_sensor.temp.type = SENSOR_TEMP; sc->sc_sensor.humi.type = SENSOR_HUMIDITY; sc->sc_sensor.temp.flags |= SENSOR_FINVALID; sc->sc_sensor.humi.flags |= SENSOR_FINVALID; /* add label with sensor serial# */ (void)snprintf(sc->sc_sensor.temp.desc, sizeof(sc->sc_sensor.temp.desc), "Temp.(#%s)", scc->sc_udi.udi_serial); (void)snprintf(sc->sc_sensor.humi.desc, sizeof(sc->sc_sensor.humi.desc), "%%RH(#%s)", scc->sc_udi.udi_serial); sensor_attach(&sc->sc_sensordev, &sc->sc_sensor.temp); sensor_attach(&sc->sc_sensordev, &sc->sc_sensor.humi); /* start sensor */ sc->sc_sensortask = sensor_task_register(sc, uoakrh_refresh, UOAKRH_REFRESH_PERIOD); if (sc->sc_sensortask == NULL) { printf(", unable to register update task\n"); return; } sensordev_install(&sc->sc_sensordev); err = uhidev_open(&sc->sc_hdev); if (err) { printf("%s: could not open interrupt pipe, quit\n", sc->sc_hdev.sc_dev.dv_xname); return; } scc->sc_ibuf = malloc(scc->sc_ilen, M_USBDEV, M_WAITOK); DPRINTF(("uoakrh_attach: complete\n")); } int uoakrh_detach(struct device *self, int flags) { struct uoakrh_softc *sc = (struct uoakrh_softc *)self; struct uoak_softc *scc = &sc->sc_uoak_softc; int rv = 0; wakeup(&sc->sc_sensortask); sensordev_deinstall(&sc->sc_sensordev); sensor_detach(&sc->sc_sensordev, &sc->sc_sensor.temp); sensor_detach(&sc->sc_sensordev, &sc->sc_sensor.humi); if (sc->sc_sensortask != NULL) sensor_task_unregister(sc->sc_sensortask); if (sc->sc_hdev.sc_state & UHIDEV_OPEN) uhidev_close(&sc->sc_hdev); if (scc->sc_ibuf != NULL) { free(scc->sc_ibuf, M_USBDEV, 0); scc->sc_ibuf = NULL; } return (rv); } void uoakrh_intr(struct uhidev *addr, void *ibuf, u_int len) { struct uoakrh_softc *sc = (struct uoakrh_softc *)addr; struct uoakrh_sensor *s = &sc->sc_sensor; struct uoak_softc *scc = &sc->sc_uoak_softc; int frame, temp, humi; if (scc->sc_ibuf == NULL) return; memcpy(scc->sc_ibuf, ibuf, len); frame = (scc->sc_ibuf[1] << 8) + (scc->sc_ibuf[0]); humi = (scc->sc_ibuf[3] << 8) + (scc->sc_ibuf[2]); temp = (scc->sc_ibuf[5] << 8) + (scc->sc_ibuf[4]); if (s->count == 0) { s->tempval = temp; s->humival = humi; } /* calculate average value */ s->tempval = (s->tempval * s->count + temp) / (s->count + 1); s->humival = (s->humival * s->count + humi) / (s->count + 1); s->count++; } void uoakrh_refresh(void *arg) { struct uoakrh_softc *sc = arg; struct uoakrh_sensor *s = &sc->sc_sensor; struct uoak_softc *scc = &sc->sc_uoak_softc; uint8_t led; /* blink LED for each cycle */ if (uoak_led_status(scc, OAK_TARGET_RAM, &led) < 0) DPRINTF(("status query error\n")); if (led == OAK_LED_OFF) (void)uoak_led_ctrl(scc, OAK_TARGET_RAM, OAK_LED_ON); else (void)uoak_led_ctrl(scc, OAK_TARGET_RAM, OAK_LED_OFF); /* update sensor value */ s->temp.value = (uint64_t)(s->tempval) * 10000; s->humi.value = (uint64_t)(s->humival) * 10; s->temp.flags &= ~SENSOR_FINVALID; s->humi.flags &= ~SENSOR_FINVALID; s->count = 0; } int uoakrh_get_sensor_setting(struct uoakrh_softc *sc, enum uoak_target target) { uint8_t result; struct uoak_softc *scc = &sc->sc_uoak_softc; memset(&scc->sc_rcmd, 0, sizeof(struct uoak_rcmd)); scc->sc_rcmd.target = target; scc->sc_rcmd.datasize = 0x1; USETW(&scc->sc_rcmd.cmd, OAK_CMD_SENSORSETTING); if (uoak_get_cmd(scc) < 0) return EIO; result = scc->sc_buf[1]; sc->sc_sensor.resolution = (result & OAK_RH_SENSOR_RES_MASK); sc->sc_rh_heater = (result & OAK_RH_SENSOR_HEATER_MASK) >> 2; return 0; } /* device specific functions */ void uoakrh_dev_setting(void *parent, enum uoak_target target) { struct uoakrh_softc *sc = (struct uoakrh_softc *)parent; /* get device specific configuration */ (void)uoakrh_get_sensor_setting(sc, target); } void uoakrh_dev_print(void *parent, enum uoak_target target) { struct uoakrh_softc *sc = (struct uoakrh_softc *)parent; printf(", %s", (sc->sc_sensor.resolution ? "8bit RH/12 bit" : "12bit RH/14bit")); printf(", heater %s", (sc->sc_rh_heater ? "ON" : "OFF")); }