/* $OpenBSD: usb_subr.c,v 1.73 2009/01/14 21:02:57 fgsch Exp $ */ /* $NetBSD: usb_subr.c,v 1.103 2003/01/10 11:19:13 augustss Exp $ */ /* $FreeBSD: src/sys/dev/usb/usb_subr.c,v 1.18 1999/11/17 22:33:47 n_hibma Exp $ */ /* * Copyright (c) 1998 The NetBSD Foundation, Inc. * All rights reserved. * * This code is derived from software contributed to The NetBSD Foundation * by Lennart Augustsson (lennart@augustsson.net) at * Carlstedt Research & Technology. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #ifdef USB_DEBUG #define DPRINTF(x) do { if (usbdebug) printf x; } while (0) #define DPRINTFN(n,x) do { if (usbdebug>(n)) printf x; } while (0) extern int usbdebug; #else #define DPRINTF(x) #define DPRINTFN(n,x) #endif usbd_status usbd_set_config(usbd_device_handle, int); void usbd_devinfo(usbd_device_handle, int, char *, size_t); void usbd_devinfo_vp(usbd_device_handle, char *, size_t, char *, size_t, int); char *usbd_get_string(usbd_device_handle, int, char *, size_t); int usbd_getnewaddr(usbd_bus_handle); int usbd_print(void *, const char *); int usbd_submatch(struct device *, void *, void *); void usbd_free_iface_data(usbd_device_handle, int); void usbd_kill_pipe(usbd_pipe_handle); usbd_status usbd_probe_and_attach(struct device *, usbd_device_handle, int, int); u_int32_t usb_cookie_no = 0; #ifdef USBVERBOSE #include #endif /* USBVERBOSE */ const char * const usbd_error_strs[] = { "NORMAL_COMPLETION", "IN_PROGRESS", "PENDING_REQUESTS", "NOT_STARTED", "INVAL", "NOMEM", "CANCELLED", "BAD_ADDRESS", "IN_USE", "NO_ADDR", "SET_ADDR_FAILED", "NO_POWER", "TOO_DEEP", "IOERROR", "NOT_CONFIGURED", "TIMEOUT", "SHORT_XFER", "STALLED", "INTERRUPTED", "XXX", }; const char * usbd_errstr(usbd_status err) { static char buffer[5]; if (err < USBD_ERROR_MAX) return (usbd_error_strs[err]); else { snprintf(buffer, sizeof(buffer), "%d", err); return (buffer); } } usbd_status usbd_get_string_desc(usbd_device_handle dev, int sindex, int langid, usb_string_descriptor_t *sdesc, int *sizep) { usb_device_request_t req; usbd_status err; int actlen; req.bmRequestType = UT_READ_DEVICE; req.bRequest = UR_GET_DESCRIPTOR; USETW2(req.wValue, UDESC_STRING, sindex); USETW(req.wIndex, langid); USETW(req.wLength, 2); /* size and descriptor type first */ err = usbd_do_request_flags(dev, &req, sdesc, USBD_SHORT_XFER_OK, &actlen, USBD_DEFAULT_TIMEOUT); if (err) return (err); if (actlen < 2) return (USBD_SHORT_XFER); USETW(req.wLength, sdesc->bLength); /* the whole string */ err = usbd_do_request_flags(dev, &req, sdesc, USBD_SHORT_XFER_OK, &actlen, USBD_DEFAULT_TIMEOUT); if (err) return (err); if (actlen != sdesc->bLength) { DPRINTFN(-1, ("usbd_get_string_desc: expected %d, got %d\n", sdesc->bLength, actlen)); } *sizep = actlen; return (USBD_NORMAL_COMPLETION); } char * usbd_get_string(usbd_device_handle dev, int si, char *buf, size_t buflen) { int swap = dev->quirks->uq_flags & UQ_SWAP_UNICODE; usb_string_descriptor_t us; char *s; int i, n; u_int16_t c; usbd_status err; int size; if (si == 0) return (0); if (dev->quirks->uq_flags & UQ_NO_STRINGS) return (0); if (dev->langid == USBD_NOLANG) { /* Set up default language */ err = usbd_get_string_desc(dev, USB_LANGUAGE_TABLE, 0, &us, &size); if (err || size < 4) dev->langid = 0; /* Well, just pick English then */ else { /* Pick the first language as the default. */ dev->langid = UGETW(us.bString[0]); } } err = usbd_get_string_desc(dev, si, dev->langid, &us, &size); if (err) return (0); s = buf; n = size / 2 - 1; for (i = 0; i < n && i < buflen ; i++) { c = UGETW(us.bString[i]); /* Convert from Unicode, handle buggy strings. */ if ((c & 0xff00) == 0) *s++ = c; else if ((c & 0x00ff) == 0 && swap) *s++ = c >> 8; else *s++ = '?'; } if (buflen > 0) *s++ = 0; return (buf); } static void usbd_trim_spaces(char *p) { char *q, *e; if (p == NULL) return; q = e = p; while (*q == ' ') /* skip leading spaces */ q++; while ((*p = *q++)) /* copy string */ if (*p++ != ' ') /* remember last non-space */ e = p; *e = 0; /* kill trailing spaces */ } void usbd_devinfo_vp(usbd_device_handle dev, char *v, size_t vl, char *p, size_t pl, int usedev) { usb_device_descriptor_t *udd = &dev->ddesc; char *vendor = NULL, *product = NULL; #ifdef USBVERBOSE const struct usb_known_vendor *ukv; const struct usb_known_product *ukp; #endif if (dev == NULL) { v[0] = p[0] = '\0'; return; } if (usedev) { vendor = usbd_get_string(dev, udd->iManufacturer, v, vl); usbd_trim_spaces(vendor); product = usbd_get_string(dev, udd->iProduct, p, pl); usbd_trim_spaces(product); } #ifdef USBVERBOSE if (vendor == NULL || product == NULL) { for (ukv = usb_known_vendors; ukv->vendorname != NULL; ukv++) { if (ukv->vendor == UGETW(udd->idVendor)) { vendor = ukv->vendorname; break; } } if (vendor != NULL) { for (ukp = usb_known_products; ukp->productname != NULL; ukp++) { if (ukp->vendor == UGETW(udd->idVendor) && (ukp->product == UGETW(udd->idProduct))) { product = ukp->productname; break; } } } } #endif if (v == vendor) ; else if (vendor != NULL && *vendor) strlcpy(v, vendor, vl); else snprintf(v, vl, "vendor 0x%04x", UGETW(udd->idVendor)); if (p == product) ; else if (product != NULL && *product) strlcpy(p, product, pl); else snprintf(p, pl, "product 0x%04x", UGETW(udd->idProduct)); } int usbd_printBCD(char *cp, size_t len, int bcd) { int l; l = snprintf(cp, len, "%x.%02x", bcd >> 8, bcd & 0xff); if (l == -1 || len == 0) return (0); if (l >= len) return len - 1; return (l); } void usbd_devinfo(usbd_device_handle dev, int showclass, char *base, size_t len) { usb_device_descriptor_t *udd = &dev->ddesc; char vendor[USB_MAX_STRING_LEN]; char product[USB_MAX_STRING_LEN]; char *cp = base; int bcdDevice, bcdUSB; usbd_devinfo_vp(dev, vendor, sizeof vendor, product, sizeof product, 1); snprintf(cp, len, "\"%s %s\"", vendor, product); cp += strlen(cp); if (showclass) { snprintf(cp, base + len - cp, ", class %d/%d", udd->bDeviceClass, udd->bDeviceSubClass); cp += strlen(cp); } bcdUSB = UGETW(udd->bcdUSB); bcdDevice = UGETW(udd->bcdDevice); snprintf(cp, base + len - cp, " rev "); cp += strlen(cp); usbd_printBCD(cp, base + len - cp, bcdUSB); cp += strlen(cp); snprintf(cp, base + len - cp, "/"); cp += strlen(cp); usbd_printBCD(cp, base + len - cp, bcdDevice); cp += strlen(cp); snprintf(cp, base + len - cp, " addr %d", dev->address); } char * usbd_devinfo_alloc(usbd_device_handle dev, int showclass) { char *devinfop; devinfop = malloc(DEVINFOSIZE, M_TEMP, M_WAITOK); usbd_devinfo(dev, showclass, devinfop, DEVINFOSIZE); return devinfop; } void usbd_devinfo_free(char *devinfop) { free(devinfop, M_TEMP); } /* Delay for a certain number of ms */ void usb_delay_ms(usbd_bus_handle bus, u_int ms) { /* Wait at least two clock ticks so we know the time has passed. */ if (bus->use_polling || cold) delay((ms+1) * 1000); else tsleep(&ms, PRIBIO, "usbdly", (ms*hz+999)/1000 + 1); } /* Delay given a device handle. */ void usbd_delay_ms(usbd_device_handle dev, u_int ms) { usb_delay_ms(dev->bus, ms); } usbd_status usbd_port_disown_to_1_1(usbd_device_handle dev, int port, usb_port_status_t *ps) { usb_device_request_t req; usbd_status err; int n; req.bmRequestType = UT_WRITE_CLASS_OTHER; req.bRequest = UR_SET_FEATURE; USETW(req.wValue, UHF_PORT_DISOWN_TO_1_1); USETW(req.wIndex, port); USETW(req.wLength, 0); err = usbd_do_request(dev, &req, 0); DPRINTF(("usbd_disown_to_1_1: port %d disown request done, error=%s\n", port, usbd_errstr(err))); if (err) return (err); n = 10; do { /* Wait for device to recover from reset. */ usbd_delay_ms(dev, USB_PORT_RESET_DELAY); err = usbd_get_port_status(dev, port, ps); if (err) { DPRINTF(("%s: get status failed %d\n", __func__, err)); return (err); } /* If the device disappeared, just give up. */ if (!(UGETW(ps->wPortStatus) & UPS_CURRENT_CONNECT_STATUS)) return (USBD_NORMAL_COMPLETION); } while ((UGETW(ps->wPortChange) & UPS_C_PORT_RESET) == 0 && --n > 0); if (n == 0) return (USBD_TIMEOUT); return (err); } usbd_status usbd_reset_port(usbd_device_handle dev, int port, usb_port_status_t *ps) { usb_device_request_t req; usbd_status err; int n; req.bmRequestType = UT_WRITE_CLASS_OTHER; req.bRequest = UR_SET_FEATURE; USETW(req.wValue, UHF_PORT_RESET); USETW(req.wIndex, port); USETW(req.wLength, 0); err = usbd_do_request(dev, &req, 0); DPRINTFN(1,("usbd_reset_port: port %d reset done, error=%s\n", port, usbd_errstr(err))); if (err) return (err); n = 10; do { /* Wait for device to recover from reset. */ usbd_delay_ms(dev, USB_PORT_RESET_DELAY); err = usbd_get_port_status(dev, port, ps); if (err) { DPRINTF(("usbd_reset_port: get status failed %d\n", err)); return (err); } /* If the device disappeared, just give up. */ if (!(UGETW(ps->wPortStatus) & UPS_CURRENT_CONNECT_STATUS)) return (USBD_NORMAL_COMPLETION); } while ((UGETW(ps->wPortChange) & UPS_C_PORT_RESET) == 0 && --n > 0); if (n == 0) return (USBD_TIMEOUT); err = usbd_clear_port_feature(dev, port, UHF_C_PORT_RESET); #ifdef USB_DEBUG if (err) DPRINTF(("usbd_reset_port: clear port feature failed %d\n", err)); #endif /* Wait for the device to recover from reset. */ usbd_delay_ms(dev, USB_PORT_RESET_RECOVERY); return (err); } usb_interface_descriptor_t * usbd_find_idesc(usb_config_descriptor_t *cd, int ifaceidx, int altidx) { char *p = (char *)cd; char *end = p + UGETW(cd->wTotalLength); usb_interface_descriptor_t *d; int curidx, lastidx, curaidx = 0; for (curidx = lastidx = -1; p < end; ) { d = (usb_interface_descriptor_t *)p; DPRINTFN(4,("usbd_find_idesc: idx=%d(%d) altidx=%d(%d) len=%d " "type=%d\n", ifaceidx, curidx, altidx, curaidx, d->bLength, d->bDescriptorType)); if (d->bLength == 0) /* bad descriptor */ break; p += d->bLength; if (p <= end && d->bDescriptorType == UDESC_INTERFACE) { if (d->bInterfaceNumber != lastidx) { lastidx = d->bInterfaceNumber; curidx++; curaidx = 0; } else curaidx++; if (ifaceidx == curidx && altidx == curaidx) return (d); } } return (NULL); } usb_endpoint_descriptor_t * usbd_find_edesc(usb_config_descriptor_t *cd, int ifaceidx, int altidx, int endptidx) { char *p = (char *)cd; char *end = p + UGETW(cd->wTotalLength); usb_interface_descriptor_t *d; usb_endpoint_descriptor_t *e; int curidx; d = usbd_find_idesc(cd, ifaceidx, altidx); if (d == NULL) return (NULL); if (endptidx >= d->bNumEndpoints) /* quick exit */ return (NULL); curidx = -1; for (p = (char *)d + d->bLength; p < end; ) { e = (usb_endpoint_descriptor_t *)p; if (e->bLength == 0) /* bad descriptor */ break; p += e->bLength; if (p <= end && e->bDescriptorType == UDESC_INTERFACE) return (NULL); if (p <= end && e->bDescriptorType == UDESC_ENDPOINT) { curidx++; if (curidx == endptidx) return (e); } } return (NULL); } usbd_status usbd_fill_iface_data(usbd_device_handle dev, int ifaceidx, int altidx) { usbd_interface_handle ifc = &dev->ifaces[ifaceidx]; usb_interface_descriptor_t *idesc; char *p, *end; int endpt, nendpt; DPRINTFN(4,("usbd_fill_iface_data: ifaceidx=%d altidx=%d\n", ifaceidx, altidx)); idesc = usbd_find_idesc(dev->cdesc, ifaceidx, altidx); if (idesc == NULL) return (USBD_INVAL); ifc->device = dev; ifc->idesc = idesc; ifc->index = ifaceidx; ifc->altindex = altidx; nendpt = ifc->idesc->bNumEndpoints; DPRINTFN(4,("usbd_fill_iface_data: found idesc nendpt=%d\n", nendpt)); if (nendpt != 0) { ifc->endpoints = malloc(nendpt * sizeof(struct usbd_endpoint), M_USB, M_NOWAIT); if (ifc->endpoints == NULL) return (USBD_NOMEM); } else ifc->endpoints = NULL; ifc->priv = NULL; p = (char *)ifc->idesc + ifc->idesc->bLength; end = (char *)dev->cdesc + UGETW(dev->cdesc->wTotalLength); #define ed ((usb_endpoint_descriptor_t *)p) for (endpt = 0; endpt < nendpt; endpt++) { DPRINTFN(10,("usbd_fill_iface_data: endpt=%d\n", endpt)); for (; p < end; p += ed->bLength) { DPRINTFN(10,("usbd_fill_iface_data: p=%p end=%p " "len=%d type=%d\n", p, end, ed->bLength, ed->bDescriptorType)); if (p + ed->bLength <= end && ed->bLength != 0 && ed->bDescriptorType == UDESC_ENDPOINT) goto found; if (ed->bLength == 0 || ed->bDescriptorType == UDESC_INTERFACE) break; } /* passed end, or bad desc */ printf("usbd_fill_iface_data: bad descriptor(s): %s\n", ed->bLength == 0 ? "0 length" : ed->bDescriptorType == UDESC_INTERFACE ? "iface desc" : "out of data"); goto bad; found: ifc->endpoints[endpt].edesc = ed; if (dev->speed == USB_SPEED_HIGH) { u_int mps; /* Control and bulk endpoints have max packet limits. */ switch (UE_GET_XFERTYPE(ed->bmAttributes)) { case UE_CONTROL: mps = USB_2_MAX_CTRL_PACKET; goto check; case UE_BULK: mps = USB_2_MAX_BULK_PACKET; check: if (UGETW(ed->wMaxPacketSize) != mps) { USETW(ed->wMaxPacketSize, mps); #ifdef DIAGNOSTIC printf("usbd_fill_iface_data: bad max " "packet size\n"); #endif } break; default: break; } } ifc->endpoints[endpt].refcnt = 0; ifc->endpoints[endpt].savedtoggle = 0; p += ed->bLength; } #undef ed LIST_INIT(&ifc->pipes); return (USBD_NORMAL_COMPLETION); bad: if (ifc->endpoints != NULL) { free(ifc->endpoints, M_USB); ifc->endpoints = NULL; } return (USBD_INVAL); } void usbd_free_iface_data(usbd_device_handle dev, int ifcno) { usbd_interface_handle ifc = &dev->ifaces[ifcno]; if (ifc->endpoints) free(ifc->endpoints, M_USB); } usbd_status usbd_set_config(usbd_device_handle dev, int conf) { usb_device_request_t req; req.bmRequestType = UT_WRITE_DEVICE; req.bRequest = UR_SET_CONFIG; USETW(req.wValue, conf); USETW(req.wIndex, 0); USETW(req.wLength, 0); return (usbd_do_request(dev, &req, 0)); } usbd_status usbd_set_config_no(usbd_device_handle dev, int no, int msg) { int index; usb_config_descriptor_t cd; usbd_status err; if (no == USB_UNCONFIG_NO) return (usbd_set_config_index(dev, USB_UNCONFIG_INDEX, msg)); DPRINTFN(5,("usbd_set_config_no: %d\n", no)); /* Figure out what config index to use. */ for (index = 0; index < dev->ddesc.bNumConfigurations; index++) { err = usbd_get_config_desc(dev, index, &cd); if (err) return (err); if (cd.bConfigurationValue == no) return (usbd_set_config_index(dev, index, msg)); } return (USBD_INVAL); } usbd_status usbd_set_config_index(usbd_device_handle dev, int index, int msg) { usb_status_t ds; usb_config_descriptor_t cd, *cdp; usbd_status err; int i, ifcidx, nifc, len, selfpowered, power; DPRINTFN(5,("usbd_set_config_index: dev=%p index=%d\n", dev, index)); /* XXX check that all interfaces are idle */ if (dev->config != USB_UNCONFIG_NO) { DPRINTF(("usbd_set_config_index: free old config\n")); /* Free all configuration data structures. */ nifc = dev->cdesc->bNumInterface; for (ifcidx = 0; ifcidx < nifc; ifcidx++) usbd_free_iface_data(dev, ifcidx); free(dev->ifaces, M_USB); free(dev->cdesc, M_USB); dev->ifaces = NULL; dev->cdesc = NULL; dev->config = USB_UNCONFIG_NO; } if (index == USB_UNCONFIG_INDEX) { /* We are unconfiguring the device, so leave unallocated. */ DPRINTF(("usbd_set_config_index: set config 0\n")); err = usbd_set_config(dev, USB_UNCONFIG_NO); if (err) DPRINTF(("usbd_set_config_index: setting config=0 " "failed, error=%s\n", usbd_errstr(err))); return (err); } /* Get the short descriptor. */ err = usbd_get_config_desc(dev, index, &cd); if (err) return (err); len = UGETW(cd.wTotalLength); cdp = malloc(len, M_USB, M_NOWAIT); if (cdp == NULL) return (USBD_NOMEM); /* Get the full descriptor. */ for (i = 0; i < 3; i++) { err = usbd_get_desc(dev, UDESC_CONFIG, index, len, cdp); if (!err) break; usbd_delay_ms(dev, 200); } if (err) goto bad; if (cdp->bDescriptorType != UDESC_CONFIG) { DPRINTFN(-1,("usbd_set_config_index: bad desc %d\n", cdp->bDescriptorType)); err = USBD_INVAL; goto bad; } /* Figure out if the device is self or bus powered. */ selfpowered = 0; if (!(dev->quirks->uq_flags & UQ_BUS_POWERED) && (cdp->bmAttributes & UC_SELF_POWERED)) { /* May be self powered. */ if (cdp->bmAttributes & UC_BUS_POWERED) { /* Must ask device. */ if (dev->quirks->uq_flags & UQ_POWER_CLAIM) { /* * Hub claims to be self powered, but isn't. * It seems that the power status can be * determined by the hub characteristics. */ usb_hub_descriptor_t hd; usb_device_request_t req; req.bmRequestType = UT_READ_CLASS_DEVICE; req.bRequest = UR_GET_DESCRIPTOR; USETW(req.wValue, 0); USETW(req.wIndex, 0); USETW(req.wLength, USB_HUB_DESCRIPTOR_SIZE); err = usbd_do_request(dev, &req, &hd); if (!err && (UGETW(hd.wHubCharacteristics) & UHD_PWR_INDIVIDUAL)) selfpowered = 1; DPRINTF(("usbd_set_config_index: charac=0x%04x" ", error=%s\n", UGETW(hd.wHubCharacteristics), usbd_errstr(err))); } else { err = usbd_get_device_status(dev, &ds); if (!err && (UGETW(ds.wStatus) & UDS_SELF_POWERED)) selfpowered = 1; DPRINTF(("usbd_set_config_index: status=0x%04x" ", error=%s\n", UGETW(ds.wStatus), usbd_errstr(err))); } } else selfpowered = 1; } DPRINTF(("usbd_set_config_index: (addr %d) cno=%d attr=0x%02x, " "selfpowered=%d, power=%d\n", cdp->bConfigurationValue, dev->address, cdp->bmAttributes, selfpowered, cdp->bMaxPower * 2)); /* Check if we have enough power. */ #ifdef USB_DEBUG if (dev->powersrc == NULL) { DPRINTF(("usbd_set_config_index: No power source?\n")); err = USBD_IOERROR; goto bad; } #endif power = cdp->bMaxPower * 2; if (power > dev->powersrc->power) { DPRINTF(("power exceeded %d %d\n", power,dev->powersrc->power)); /* XXX print nicer message. */ if (msg) printf("%s: device addr %d (config %d) exceeds power " "budget, %d mA > %d mA\n", dev->bus->bdev.dv_xname, dev->address, cdp->bConfigurationValue, power, dev->powersrc->power); err = USBD_NO_POWER; goto bad; } dev->power = power; dev->self_powered = selfpowered; /* Set the actual configuration value. */ DPRINTF(("usbd_set_config_index: set config %d\n", cdp->bConfigurationValue)); err = usbd_set_config(dev, cdp->bConfigurationValue); if (err) { DPRINTF(("usbd_set_config_index: setting config=%d failed, " "error=%s\n", cdp->bConfigurationValue, usbd_errstr(err))); goto bad; } /* Allocate and fill interface data. */ nifc = cdp->bNumInterface; dev->ifaces = malloc(nifc * sizeof(struct usbd_interface), M_USB, M_NOWAIT); if (dev->ifaces == NULL) { err = USBD_NOMEM; goto bad; } DPRINTFN(5,("usbd_set_config_index: dev=%p cdesc=%p\n", dev, cdp)); dev->cdesc = cdp; dev->config = cdp->bConfigurationValue; for (ifcidx = 0; ifcidx < nifc; ifcidx++) { err = usbd_fill_iface_data(dev, ifcidx, 0); if (err) { while (--ifcidx >= 0) usbd_free_iface_data(dev, ifcidx); goto bad; } } return (USBD_NORMAL_COMPLETION); bad: free(cdp, M_USB); return (err); } /* XXX add function for alternate settings */ usbd_status usbd_setup_pipe(usbd_device_handle dev, usbd_interface_handle iface, struct usbd_endpoint *ep, int ival, usbd_pipe_handle *pipe) { usbd_pipe_handle p; usbd_status err; DPRINTFN(1,("usbd_setup_pipe: dev=%p iface=%p ep=%p pipe=%p\n", dev, iface, ep, pipe)); p = malloc(dev->bus->pipe_size, M_USB, M_NOWAIT); if (p == NULL) return (USBD_NOMEM); p->device = dev; p->iface = iface; p->endpoint = ep; ep->refcnt++; p->refcnt = 1; p->intrxfer = 0; p->running = 0; p->aborting = 0; p->repeat = 0; p->interval = ival; SIMPLEQ_INIT(&p->queue); err = dev->bus->methods->open_pipe(p); if (err) { DPRINTFN(-1,("usbd_setup_pipe: endpoint=0x%x failed, error=" "%s\n", ep->edesc->bEndpointAddress, usbd_errstr(err))); free(p, M_USB); return (err); } *pipe = p; return (USBD_NORMAL_COMPLETION); } /* Abort the device control pipe. */ void usbd_kill_pipe(usbd_pipe_handle pipe) { usbd_abort_pipe(pipe); pipe->methods->close(pipe); pipe->endpoint->refcnt--; free(pipe, M_USB); } int usbd_getnewaddr(usbd_bus_handle bus) { int addr; for (addr = 1; addr < USB_MAX_DEVICES; addr++) if (bus->devices[addr] == 0) return (addr); return (-1); } usbd_status usbd_probe_and_attach(struct device *parent, usbd_device_handle dev, int port, int addr) { struct usb_attach_arg uaa; usb_device_descriptor_t *dd = &dev->ddesc; int found, i, confi, nifaces, len; usbd_status err; struct device *dv; usbd_interface_handle *ifaces; extern struct rwlock usbpalock; rw_enter_write(&usbpalock); uaa.device = dev; uaa.iface = NULL; uaa.ifaces = NULL; uaa.nifaces = 0; uaa.usegeneric = 0; uaa.port = port; uaa.configno = UHUB_UNK_CONFIGURATION; uaa.ifaceno = UHUB_UNK_INTERFACE; uaa.vendor = UGETW(dd->idVendor); uaa.product = UGETW(dd->idProduct); uaa.release = UGETW(dd->bcdDevice); /* First try with device specific drivers. */ DPRINTF(("usbd_probe_and_attach trying device specific drivers\n")); dv = config_found_sm(parent, &uaa, usbd_print, usbd_submatch); if (dv) { dev->subdevs = malloc(2 * sizeof dv, M_USB, M_NOWAIT); if (dev->subdevs == NULL) { err = USBD_NOMEM; goto fail; } dev->subdevs[0] = dv; dev->subdevs[1] = 0; err = USBD_NORMAL_COMPLETION; goto fail; } DPRINTF(("usbd_probe_and_attach: no device specific driver found\n")); DPRINTF(("usbd_probe_and_attach: looping over %d configurations\n", dd->bNumConfigurations)); /* Next try with interface drivers. */ for (confi = 0; confi < dd->bNumConfigurations; confi++) { DPRINTFN(1,("usbd_probe_and_attach: trying config idx=%d\n", confi)); err = usbd_set_config_index(dev, confi, 1); if (err) { #ifdef USB_DEBUG DPRINTF(("%s: port %d, set config at addr %d failed, " "error=%s\n", parent->dv_xname, port, addr, usbd_errstr(err))); #else printf("%s: port %d, set config at addr %d failed\n", parent->dv_xname, port, addr); #endif goto fail; } nifaces = dev->cdesc->bNumInterface; uaa.configno = dev->cdesc->bConfigurationValue; ifaces = malloc(nifaces * sizeof(usbd_interface_handle), M_USB, M_NOWAIT); if (ifaces == NULL) { err = USBD_NOMEM; goto fail; } for (i = 0; i < nifaces; i++) ifaces[i] = &dev->ifaces[i]; uaa.ifaces = ifaces; uaa.nifaces = nifaces; len = (nifaces+1) * sizeof dv; dev->subdevs = malloc(len, M_USB, M_NOWAIT | M_ZERO); if (dev->subdevs == NULL) { free(ifaces, M_USB); err = USBD_NOMEM; goto fail; } found = 0; for (i = 0; i < nifaces; i++) { if (ifaces[i] == NULL) continue; /* interface already claimed */ uaa.iface = ifaces[i]; uaa.ifaceno = ifaces[i]->idesc->bInterfaceNumber; dv = config_found_sm(parent, &uaa, usbd_print, usbd_submatch); if (dv != NULL) { dev->subdevs[found++] = dv; ifaces[i] = NULL; /* consumed */ } } free(ifaces, M_USB); if (found != 0) { err = USBD_NORMAL_COMPLETION; goto fail; } free(dev->subdevs, M_USB); dev->subdevs = 0; } /* No interfaces were attached in any of the configurations. */ if (dd->bNumConfigurations > 1) /* don't change if only 1 config */ usbd_set_config_index(dev, 0, 0); DPRINTF(("usbd_probe_and_attach: no interface drivers found\n")); /* Finally try the generic driver. */ uaa.iface = NULL; uaa.usegeneric = 1; uaa.configno = UHUB_UNK_CONFIGURATION; uaa.ifaceno = UHUB_UNK_INTERFACE; dv = config_found_sm(parent, &uaa, usbd_print, usbd_submatch); if (dv != NULL) { dev->subdevs = malloc(2 * sizeof dv, M_USB, M_NOWAIT); if (dev->subdevs == 0) { err = USBD_NOMEM; goto fail; } dev->subdevs[0] = dv; dev->subdevs[1] = 0; err = USBD_NORMAL_COMPLETION; goto fail; } /* * The generic attach failed, but leave the device as it is. * We just did not find any drivers, that's all. The device is * fully operational and not harming anyone. */ DPRINTF(("usbd_probe_and_attach: generic attach failed\n")); err = USBD_NORMAL_COMPLETION; fail: rw_exit_write(&usbpalock); return (err); } /* * Called when a new device has been put in the powered state, * but not yet in the addressed state. * Get initial descriptor, set the address, get full descriptor, * and attach a driver. */ usbd_status usbd_new_device(struct device *parent, usbd_bus_handle bus, int depth, int speed, int port, struct usbd_port *up) { usbd_device_handle dev, adev; struct usbd_device *hub; usb_device_descriptor_t *dd; usb_port_status_t ps; usbd_status err; int addr; int i; int p; DPRINTF(("usbd_new_device bus=%p port=%d depth=%d speed=%d\n", bus, port, depth, speed)); addr = usbd_getnewaddr(bus); if (addr < 0) { printf("%s: No free USB addresses, new device ignored.\n", bus->bdev.dv_xname); return (USBD_NO_ADDR); } dev = malloc(sizeof *dev, M_USB, M_NOWAIT | M_ZERO); if (dev == NULL) return (USBD_NOMEM); dev->bus = bus; /* Set up default endpoint handle. */ dev->def_ep.edesc = &dev->def_ep_desc; /* Set up default endpoint descriptor. */ dev->def_ep_desc.bLength = USB_ENDPOINT_DESCRIPTOR_SIZE; dev->def_ep_desc.bDescriptorType = UDESC_ENDPOINT; dev->def_ep_desc.bEndpointAddress = USB_CONTROL_ENDPOINT; dev->def_ep_desc.bmAttributes = UE_CONTROL; USETW(dev->def_ep_desc.wMaxPacketSize, USB_MAX_IPACKET); dev->def_ep_desc.bInterval = 0; dev->quirks = &usbd_no_quirk; dev->address = USB_START_ADDR; dev->ddesc.bMaxPacketSize = 0; dev->depth = depth; dev->powersrc = up; dev->myhub = up->parent; up->device = dev; if (up->parent && speed > up->parent->speed) { DPRINTF(("%s: maximum speed of attached device, " "%d, is higher than speed of parent hub, %d\n", __func__, speed, up->parent->speed)); /* * Reduce the speed, otherwise we won't setup the * proper transfer methods. */ speed = up->parent->speed; } /* Locate port on upstream high speed hub */ for (adev = dev, hub = up->parent; hub != NULL && hub->speed != USB_SPEED_HIGH; adev = hub, hub = hub->myhub) ; if (hub) { for (p = 0; p < hub->hub->hubdesc.bNbrPorts; p++) { if (hub->hub->ports[p].device == adev) { dev->myhsport = &hub->hub->ports[p]; goto found; } } panic("usbd_new_device: cannot find HS port"); found: DPRINTFN(1,("usbd_new_device: high speed port %d\n", p)); } else { dev->myhsport = NULL; } dev->speed = speed; dev->langid = USBD_NOLANG; dev->cookie.cookie = ++usb_cookie_no; /* Establish the default pipe. */ err = usbd_setup_pipe(dev, 0, &dev->def_ep, USBD_DEFAULT_INTERVAL, &dev->default_pipe); if (err) { usbd_remove_device(dev, up); return (err); } dd = &dev->ddesc; /* Try to get device descriptor */ /* * some device will need small size query at first (XXX: out of spec) * we will get full size descriptor later, just determin the maximum * packet size of the control pipe at this moment. */ for (i = 0; i < 3; i++) { /* Get the first 8 bytes of the device descriptor. */ /* 8 byte is magic size, some device only return 8 byte for 1st * query (XXX: out of spec) */ err = usbd_get_desc(dev, UDESC_DEVICE, 0, USB_MAX_IPACKET, dd); if (!err) break; usbd_delay_ms(dev, 100+50*i); } /* some device need actual size request for the query. try again */ if (err) { USETW(dev->def_ep_desc.wMaxPacketSize, USB_DEVICE_DESCRIPTOR_SIZE); usbd_reset_port(up->parent, port, &ps); for (i = 0; i < 3; i++) { err = usbd_get_desc(dev, UDESC_DEVICE, 0, USB_DEVICE_DESCRIPTOR_SIZE, dd); if (!err) break; usbd_delay_ms(dev, 100+50*i); } } /* XXX some devices need more time to wake up */ if (err) { USETW(dev->def_ep_desc.wMaxPacketSize, USB_MAX_IPACKET); usbd_reset_port(up->parent, port, &ps); usbd_delay_ms(dev, 500); err = usbd_get_desc(dev, UDESC_DEVICE, 0, USB_MAX_IPACKET, dd); } /* fail to get device descriptor, give up */ if (err) { DPRINTFN(-1, ("usbd_new_device: addr=%d, getting first desc " "failed\n", addr)); usbd_remove_device(dev, up); return (err); } if (speed == USB_SPEED_HIGH) { /* Max packet size must be 64 (sec 5.5.3). */ if (dd->bMaxPacketSize != USB_2_MAX_CTRL_PACKET) { #ifdef DIAGNOSTIC printf("usbd_new_device: addr=%d bad max packet size\n", addr); #endif dd->bMaxPacketSize = USB_2_MAX_CTRL_PACKET; } } DPRINTF(("usbd_new_device: adding unit addr=%d, rev=%02x, class=%d, " "subclass=%d, protocol=%d, maxpacket=%d, len=%d, speed=%d\n", addr,UGETW(dd->bcdUSB), dd->bDeviceClass, dd->bDeviceSubClass, dd->bDeviceProtocol, dd->bMaxPacketSize, dd->bLength, dev->speed)); if (dd->bDescriptorType != UDESC_DEVICE) { /* Illegal device descriptor */ DPRINTFN(-1,("usbd_new_device: illegal descriptor %d\n", dd->bDescriptorType)); usbd_remove_device(dev, up); return (USBD_INVAL); } if (dd->bLength < USB_DEVICE_DESCRIPTOR_SIZE) { DPRINTFN(-1,("usbd_new_device: bad length %d\n", dd->bLength)); usbd_remove_device(dev, up); return (USBD_INVAL); } USETW(dev->def_ep_desc.wMaxPacketSize, dd->bMaxPacketSize); err = usbd_reload_device_desc(dev); if (err) { DPRINTFN(-1, ("usbd_new_device: addr=%d, getting full desc " "failed\n", addr)); usbd_remove_device(dev, up); return (err); } /* Set the address. */ DPRINTFN(5,("usbd_new_device: setting device address=%d\n", addr)); err = usbd_set_address(dev, addr); if (err) { DPRINTFN(-1,("usbd_new_device: set address %d failed\n", addr)); err = USBD_SET_ADDR_FAILED; usbd_remove_device(dev, up); return (err); } /* Allow device time to set new address */ usbd_delay_ms(dev, USB_SET_ADDRESS_SETTLE); dev->address = addr; /* New device address now */ bus->devices[addr] = dev; /* send disown request to handover 2.0 to 1.1. */ if (dev->quirks->uq_flags & UQ_EHCI_NEEDTO_DISOWN) { /* only effective when the target device is on ehci */ if (dev->bus->usbrev == USBREV_2_0) { DPRINTF(("%s: disown request issues to dev:%p on usb2.0 bus\n", __func__, dev)); (void) usbd_port_disown_to_1_1(dev->myhub, port, &ps); /* reset_port required to finish disown request */ (void) usbd_reset_port(dev->myhub, port, &ps); return (USBD_NORMAL_COMPLETION); } } /* Assume 100mA bus powered for now. Changed when configured. */ dev->power = USB_MIN_POWER; dev->self_powered = 0; DPRINTF(("usbd_new_device: new dev (addr %d), dev=%p, parent=%p\n", addr, dev, parent)); usbd_add_dev_event(USB_EVENT_DEVICE_ATTACH, dev); err = usbd_probe_and_attach(parent, dev, port, addr); if (err) { usbd_remove_device(dev, up); return (err); } return (USBD_NORMAL_COMPLETION); } usbd_status usbd_reload_device_desc(usbd_device_handle dev) { usbd_status err; /* Get the full device descriptor. */ err = usbd_get_device_desc(dev, &dev->ddesc); if (err) return (err); /* Figure out what's wrong with this device. */ dev->quirks = usbd_find_quirk(&dev->ddesc); return (USBD_NORMAL_COMPLETION); } void usbd_remove_device(usbd_device_handle dev, struct usbd_port *up) { DPRINTF(("usbd_remove_device: %p\n", dev)); if (dev->default_pipe != NULL) usbd_kill_pipe(dev->default_pipe); up->device = NULL; dev->bus->devices[dev->address] = NULL; free(dev, M_USB); } int usbd_print(void *aux, const char *pnp) { struct usb_attach_arg *uaa = aux; char *devinfop; devinfop = usbd_devinfo_alloc(uaa->device, 0); DPRINTFN(15, ("usbd_print dev=%p\n", uaa->device)); if (pnp) { if (!uaa->usegeneric) { usbd_devinfo_free(devinfop); return (QUIET); } printf("%s at %s", devinfop, pnp); } if (uaa->port != 0) printf(" port %d", uaa->port); if (uaa->configno != UHUB_UNK_CONFIGURATION) printf(" configuration %d", uaa->configno); if (uaa->ifaceno != UHUB_UNK_INTERFACE) printf(" interface %d", uaa->ifaceno); if (!pnp) printf(" %s\n", devinfop); usbd_devinfo_free(devinfop); return (UNCONF); } int usbd_submatch(struct device *parent, void *match, void *aux) { struct cfdata *cf = match; struct usb_attach_arg *uaa = aux; DPRINTFN(5,("usbd_submatch port=%d,%d configno=%d,%d " "ifaceno=%d,%d vendor=0x%x,0x%x product=0x%x,0x%x release=%d,%d\n", uaa->port, cf->uhubcf_port, uaa->configno, cf->uhubcf_configuration, uaa->ifaceno, cf->uhubcf_interface, uaa->vendor, cf->uhubcf_vendor, uaa->product, cf->uhubcf_product, uaa->release, cf->uhubcf_release)); if (uaa->port != 0 && /* root hub has port 0, it should match */ ((uaa->port != 0 && cf->uhubcf_port != UHUB_UNK_PORT && cf->uhubcf_port != uaa->port) || (uaa->configno != UHUB_UNK_CONFIGURATION && cf->uhubcf_configuration != UHUB_UNK_CONFIGURATION && cf->uhubcf_configuration != uaa->configno) || (uaa->ifaceno != UHUB_UNK_INTERFACE && cf->uhubcf_interface != UHUB_UNK_INTERFACE && cf->uhubcf_interface != uaa->ifaceno) || (uaa->vendor != UHUB_UNK_VENDOR && cf->uhubcf_vendor != UHUB_UNK_VENDOR && cf->uhubcf_vendor != uaa->vendor) || (uaa->product != UHUB_UNK_PRODUCT && cf->uhubcf_product != UHUB_UNK_PRODUCT && cf->uhubcf_product != uaa->product) || (uaa->release != UHUB_UNK_RELEASE && cf->uhubcf_release != UHUB_UNK_RELEASE && cf->uhubcf_release != uaa->release) ) ) return 0; if (cf->uhubcf_vendor != UHUB_UNK_VENDOR && cf->uhubcf_vendor == uaa->vendor && cf->uhubcf_product != UHUB_UNK_PRODUCT && cf->uhubcf_product == uaa->product) { /* We have a vendor&product locator match */ if (cf->uhubcf_release != UHUB_UNK_RELEASE && cf->uhubcf_release == uaa->release) uaa->matchlvl = UMATCH_VENDOR_PRODUCT_REV; else uaa->matchlvl = UMATCH_VENDOR_PRODUCT; } else uaa->matchlvl = 0; return ((*cf->cf_attach->ca_match)(parent, cf, aux)); } void usbd_fill_deviceinfo(usbd_device_handle dev, struct usb_device_info *di, int usedev) { struct usbd_port *p; int i, err, s; di->udi_bus = dev->bus->bdev.dv_unit; di->udi_addr = dev->address; di->udi_cookie = dev->cookie; usbd_devinfo_vp(dev, di->udi_vendor, sizeof(di->udi_vendor), di->udi_product, sizeof(di->udi_product), usedev); usbd_printBCD(di->udi_release, sizeof di->udi_release, UGETW(dev->ddesc.bcdDevice)); di->udi_vendorNo = UGETW(dev->ddesc.idVendor); di->udi_productNo = UGETW(dev->ddesc.idProduct); di->udi_releaseNo = UGETW(dev->ddesc.bcdDevice); di->udi_class = dev->ddesc.bDeviceClass; di->udi_subclass = dev->ddesc.bDeviceSubClass; di->udi_protocol = dev->ddesc.bDeviceProtocol; di->udi_config = dev->config; di->udi_power = dev->self_powered ? 0 : dev->power; di->udi_speed = dev->speed; if (dev->subdevs != NULL) { for (i = 0; dev->subdevs[i] && i < USB_MAX_DEVNAMES; i++) { strncpy(di->udi_devnames[i], dev->subdevs[i]->dv_xname, USB_MAX_DEVNAMELEN); di->udi_devnames[i][USB_MAX_DEVNAMELEN-1] = '\0'; } } else i = 0; for (/*i is set */; i < USB_MAX_DEVNAMES; i++) di->udi_devnames[i][0] = 0; /* empty */ if (dev->hub) { for (i = 0; i < sizeof(di->udi_ports) / sizeof(di->udi_ports[0]) && i < dev->hub->hubdesc.bNbrPorts; i++) { p = &dev->hub->ports[i]; if (p->device) err = p->device->address; else { s = UGETW(p->status.wPortStatus); if (s & UPS_PORT_ENABLED) err = USB_PORT_ENABLED; else if (s & UPS_SUSPEND) err = USB_PORT_SUSPENDED; else if (s & UPS_PORT_POWER) err = USB_PORT_POWERED; else err = USB_PORT_DISABLED; } di->udi_ports[i] = err; } di->udi_nports = dev->hub->hubdesc.bNbrPorts; } else di->udi_nports = 0; } void usb_free_device(usbd_device_handle dev) { int ifcidx, nifc; if (dev->default_pipe != NULL) usbd_kill_pipe(dev->default_pipe); if (dev->ifaces != NULL) { nifc = dev->cdesc->bNumInterface; for (ifcidx = 0; ifcidx < nifc; ifcidx++) usbd_free_iface_data(dev, ifcidx); free(dev->ifaces, M_USB); } if (dev->cdesc != NULL) free(dev->cdesc, M_USB); if (dev->subdevs != NULL) free(dev->subdevs, M_USB); free(dev, M_USB); } /* * The general mechanism for detaching drivers works as follows: Each * driver is responsible for maintaining a reference count on the * number of outstanding references to its softc (e.g. from * processing hanging in a read or write). The detach method of the * driver decrements this counter and flags in the softc that the * driver is dying and then wakes any sleepers. It then sleeps on the * softc. Each place that can sleep must maintain the reference * count. When the reference count drops to -1 (0 is the normal value * of the reference count) the a wakeup on the softc is performed * signaling to the detach waiter that all references are gone. */ /* * Called from process context when we discover that a port has * been disconnected. */ void usb_disconnect_port(struct usbd_port *up, struct device *parent) { usbd_device_handle dev = up->device; int i; DPRINTFN(3,("uhub_disconnect: up=%p dev=%p port=%d\n", up, dev, up->portno)); #ifdef DIAGNOSTIC if (dev == NULL) { printf("usb_disconnect_port: no device\n"); return; } #endif if (dev->subdevs != NULL) { DPRINTFN(3,("usb_disconnect_port: disconnect subdevs\n")); for (i = 0; dev->subdevs[i]; i++) { DPRINTF(("%s: at %s", dev->subdevs[i]->dv_xname, parent->dv_xname)); if (up->portno != 0) DPRINTF((" port %d", up->portno)); DPRINTF((" (addr %d) disconnected\n", dev->address)); config_detach(dev->subdevs[i], DETACH_FORCE); dev->subdevs[i] = 0; } } usbd_add_dev_event(USB_EVENT_DEVICE_DETACH, dev); dev->bus->devices[dev->address] = NULL; up->device = NULL; usb_free_device(dev); }