/*	$OpenBSD: usbdivar.h,v 1.40 2010/12/06 04:25:27 jakemsr Exp $ */
/*	$NetBSD: usbdivar.h,v 1.70 2002/07/11 21:14:36 augustss Exp $	*/
/*	$FreeBSD: src/sys/dev/usb/usbdivar.h,v 1.11 1999/11/17 22:33:51 n_hibma Exp $	*/

/*
 * Copyright (c) 1998 The NetBSD Foundation, Inc.
 * All rights reserved.
 *
 * This code is derived from software contributed to The NetBSD Foundation
 * by Lennart Augustsson (lennart@augustsson.net) at
 * Carlstedt Research & Technology.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 *
 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
 * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGE.
 */

/* From usb_mem.h */
struct usb_dma_block;
typedef struct {
	struct usb_dma_block	*block;
	u_int			 offs;
} usb_dma_t;

struct usbd_xfer;
struct usbd_pipe;

struct usbd_endpoint {
	usb_endpoint_descriptor_t *edesc;
	int			refcnt;
	int			savedtoggle;
};

struct usbd_bus_methods {
	usbd_status	      (*open_pipe)(struct usbd_pipe *pipe);
	void		      (*soft_intr)(void *);
	void		      (*do_poll)(struct usbd_bus *);
	usbd_status	      (*allocm)(struct usbd_bus *, usb_dma_t *,
					u_int32_t bufsize);
	void		      (*freem)(struct usbd_bus *, usb_dma_t *);
	struct usbd_xfer *    (*allocx)(struct usbd_bus *);
	void		      (*freex)(struct usbd_bus *, struct usbd_xfer *);
};

struct usbd_pipe_methods {
	usbd_status	      (*transfer)(usbd_xfer_handle xfer);
	usbd_status	      (*start)(usbd_xfer_handle xfer);
	void		      (*abort)(usbd_xfer_handle xfer);
	void		      (*close)(usbd_pipe_handle pipe);
	void		      (*cleartoggle)(usbd_pipe_handle pipe);
	void		      (*done)(usbd_xfer_handle xfer);
};

struct usbd_tt {
	struct usbd_hub	       *hub;
};

struct usbd_port {
	usb_port_status_t	status;
	u_int16_t		power;	/* mA of current on port */
	u_int8_t		portno;
	u_int8_t		restartcnt;
#define USBD_RESTART_MAX 5
	u_int8_t		reattach;
	struct usbd_device     *device;	/* Connected device */
	struct usbd_device     *parent;	/* The ports hub */
	struct usbd_tt	       *tt; /* Transaction translator (if any) */
};

struct usbd_hub {
	usbd_status	      (*explore)(usbd_device_handle hub);
	void		       *hubsoftc;
	usb_hub_descriptor_t	hubdesc;
	struct usbd_port        *ports;
};

struct usb_softc;

/*****/

struct usbd_bus {
	/* Filled by HC driver */
	struct device		bdev; /* base device, host adapter */
	struct usbd_bus_methods	*methods;
	u_int32_t		pipe_size; /* size of a pipe struct */
	/* Filled by usb driver */
	struct usbd_device     *root_hub;
	usbd_device_handle	devices[USB_MAX_DEVICES];
	char			use_polling;
	char			dying;
	int			flags;
#define USB_BUS_CONFIG_PENDING	0x01
	struct usb_softc       *usbctl;
	struct usb_device_stats	stats;
	int 			intr_context;
	u_int			no_intrs;
	int			usbrev;	/* USB revision */
#define USBREV_UNKNOWN	0
#define USBREV_PRE_1_0	1
#define USBREV_1_0	2
#define USBREV_1_1	3
#define USBREV_2_0	4
#define USBREV_STR { "unknown", "pre 1.0", "1.0", "1.1", "2.0" }
	void		       *soft; /* soft interrupt cookie */
	bus_dma_tag_t		dmatag;	/* DMA tag */
};

struct usbd_device {
	struct usbd_bus	       *bus;           /* our controller */
	struct usbd_pipe       *default_pipe;  /* pipe 0 */
	u_int8_t		dying;	       /* removed */
	u_int8_t		address;       /* device address */
	u_int8_t		config;	       /* current configuration # */
	u_int8_t		depth;         /* distance from root hub */
	u_int8_t		speed;         /* low/full/high speed */
	u_int8_t		self_powered;  /* flag for self powered */
	u_int16_t		power;         /* mA the device uses */
	int16_t			langid;	       /* language for strings */
#define USBD_NOLANG (-1)
	usb_event_cookie_t	cookie;	       /* unique connection id */
	struct usbd_port       *powersrc;      /* upstream hub port, or 0 */
	struct usbd_device     *myhub; 	       /* upstream hub */
	struct usbd_port       *myhsport;      /* closest high speed port */
	struct usbd_endpoint	def_ep;	       /* for pipe 0 */
	usb_endpoint_descriptor_t def_ep_desc; /* for pipe 0 */
	struct usbd_interface  *ifaces;        /* array of all interfaces */
	usb_device_descriptor_t ddesc;         /* device descriptor */
	usb_config_descriptor_t *cdesc;	       /* full config descr */
	const struct usbd_quirks     *quirks;  /* device quirks, always set */
	struct usbd_hub	       *hub;           /* only if this is a hub */
	struct device         **subdevs;       /* sub-devices, 0 terminated */
};

struct usbd_interface {
	struct usbd_device     *device;
	usb_interface_descriptor_t *idesc;
	int			index;
	int			altindex;
	struct usbd_endpoint   *endpoints;
	void		       *priv;
	LIST_HEAD(, usbd_pipe)	pipes;
};

struct usbd_pipe {
	struct usbd_interface  *iface;
	struct usbd_device     *device;
	struct usbd_endpoint   *endpoint;
	int			refcnt;
	char			running;
	char			aborting;
	SIMPLEQ_HEAD(, usbd_xfer) queue;
	LIST_ENTRY(usbd_pipe)	next;

	usbd_xfer_handle	intrxfer; /* used for repeating requests */
	char			repeat;
	int			interval;

	/* Filled by HC driver. */
	struct usbd_pipe_methods *methods;
};

struct usbd_xfer {
	struct usbd_pipe       *pipe;
	void		       *priv;
	void		       *buffer;
	u_int32_t		length;
	u_int32_t		actlen;
	u_int16_t		flags;
	u_int32_t		timeout;
	usbd_status		status;
	usbd_callback		callback;
	__volatile char		done;
#ifdef DIAGNOSTIC
	u_int32_t		busy_free;
#define XFER_FREE 0x46524545
#define XFER_BUSY 0x42555359
#define XFER_ONQU 0x4f4e5155
#endif

	/* For control pipe */
	usb_device_request_t	request;

	/* For isoc */
	u_int16_t		*frlengths;
	int			nframes;

	/* For memory allocation */
	struct usbd_device     *device;
	usb_dma_t		dmabuf;

	int			rqflags;
#define URQ_REQUEST	0x01
#define URQ_AUTO_DMABUF	0x10
#define URQ_DEV_DMABUF	0x20

	SIMPLEQ_ENTRY(usbd_xfer) next;

	void		       *hcpriv; /* private use by the HC driver */

	struct timeout		timeout_handle;
};

void usbd_init(void);
void usbd_finish(void);
void usb_begin_tasks(void);
void usb_end_tasks(void);

#ifdef USB_DEBUG
void usbd_dump_iface(struct usbd_interface *iface);
void usbd_dump_device(struct usbd_device *dev);
void usbd_dump_endpoint(struct usbd_endpoint *endp);
void usbd_dump_queue(usbd_pipe_handle pipe);
void usbd_dump_pipe(usbd_pipe_handle pipe);
#endif

/* Routines from usb_subr.c */
int		usbctlprint(void *, const char *);
void		usb_delay_ms(usbd_bus_handle, u_int);
usbd_status	usbd_port_disown_to_1_1(usbd_device_handle dev, 
		    int port, usb_port_status_t *ps);
usbd_status	usbd_reset_port(usbd_device_handle dev,
		    int port, usb_port_status_t *ps);
usbd_status	usbd_setup_pipe(usbd_device_handle dev,
		    usbd_interface_handle iface, struct usbd_endpoint *, int,
		    usbd_pipe_handle *pipe);
usbd_status	usbd_new_device(struct device *parent, usbd_bus_handle bus,
		    int depth, int lowspeed, int port, struct usbd_port *);
void		usbd_remove_device(usbd_device_handle, struct usbd_port *);
int		usbd_printBCD(char *cp, size_t len, int bcd);
usbd_status	usbd_fill_iface_data(usbd_device_handle dev, int i, int a);
void		usb_free_device(usbd_device_handle);

usbd_status	usb_insert_transfer(usbd_xfer_handle xfer);
void		usb_transfer_complete(usbd_xfer_handle xfer);
void		usb_disconnect_port(struct usbd_port *up, struct device *);

/* Routines from usb.c */
void		usb_needs_explore(usbd_device_handle, int);
void		usb_needs_reattach(usbd_device_handle);
void		usb_schedsoftintr(struct usbd_bus *);

/* Locator stuff. */

/* XXX these values are used to statically bind some elements in the USB tree
 * to specific driver instances. This should be somehow emulated in FreeBSD
 * but can be done later on.
 * The values are copied from the files.usb file in the NetBSD sources.
 */
#define UHUBCF_PORT_DEFAULT -1
#define UHUBCF_CONFIGURATION_DEFAULT -1
#define UHUBCF_INTERFACE_DEFAULT -1
#define UHUBCF_VENDOR_DEFAULT -1
#define UHUBCF_PRODUCT_DEFAULT -1
#define UHUBCF_RELEASE_DEFAULT -1

#define	UHUBCF_PORT		0
#define	UHUBCF_CONFIGURATION	1
#define	UHUBCF_INTERFACE	2
#define	UHUBCF_VENDOR		3
#define	UHUBCF_PRODUCT		4
#define	UHUBCF_RELEASE		5

#define	uhubcf_port		cf_loc[UHUBCF_PORT]
#define	uhubcf_configuration	cf_loc[UHUBCF_CONFIGURATION]
#define	uhubcf_interface	cf_loc[UHUBCF_INTERFACE]
#define	uhubcf_vendor		cf_loc[UHUBCF_VENDOR]
#define	uhubcf_product		cf_loc[UHUBCF_PRODUCT]
#define	uhubcf_release		cf_loc[UHUBCF_RELEASE]
#define	UHUB_UNK_PORT		UHUBCF_PORT_DEFAULT /* wildcarded 'port' */
#define	UHUB_UNK_CONFIGURATION	UHUBCF_CONFIGURATION_DEFAULT /* wildcarded 'configuration' */
#define	UHUB_UNK_INTERFACE	UHUBCF_INTERFACE_DEFAULT /* wildcarded 'interface' */
#define	UHUB_UNK_VENDOR		UHUBCF_VENDOR_DEFAULT /* wildcarded 'vendor' */
#define	UHUB_UNK_PRODUCT	UHUBCF_PRODUCT_DEFAULT /* wildcarded 'product' */
#define	UHUB_UNK_RELEASE	UHUBCF_RELEASE_DEFAULT /* wildcarded 'release' */