/* $OpenBSD: uslcom.c,v 1.4 2007/02/17 01:47:47 jsg Exp $ */ /* * Copyright (c) 2006 Jonathan Gray * * Permission to use, copy, modify, and distribute this software for any * purpose with or without fee is hereby granted, provided that the above * copyright notice and this permission notice appear in all copies. * * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. */ #include #include #include #include #include #include #include #include #include #include #include #include #ifdef USLCOM_DEBUG #define DPRINTFN(n, x) do { if (uslcomdebug > (n)) logprintf x; } while (0) int uslcomdebug = 0; #else #define DPRINTFN(n, x) #endif #define DPRINTF(x) DPRINTFN(0, x) #define USLCOMBUFSZ 256 #define USLCOM_CONFIG_NO 0 #define USLCOM_IFACE_NO 0 #define USLCOM_SET_DATA_BITS(x) (x << 8) #define USLCOM_WRITE 0x41 #define USLCOM_READ 0xc1 #define USLCOM_UART 0x00 #define USLCOM_BAUD_RATE 0x01 #define USLCOM_DATA 0x03 #define USLCOM_BREAK 0x05 #define USLCOM_CTRL 0x07 #define USLCOM_UART_DISABLE 0x00 #define USLCOM_UART_ENABLE 0x01 #define USLCOM_CTRL_DTR_ON 0x0001 #define USLCOM_CTRL_DTR_SET 0x0100 #define USLCOM_CTRL_RTS_ON 0x0002 #define USLCOM_CTRL_RTS_SET 0x0200 #define USLCOM_CTRL_CTS 0x0010 #define USLCOM_CTRL_DSR 0x0020 #define USLCOM_CTRL_DCD 0x0080 #define USLCOM_BAUD_REF 0x384000 #define USLCOM_STOP_BITS_1 0x00 #define USLCOM_STOP_BITS_2 0x02 #define USLCOM_PARITY_NONE 0x00 #define USLCOM_PARITY_ODD 0x10 #define USLCOM_PARITY_EVEN 0x20 #define USLCOM_BREAK_OFF 0x00 #define USLCOM_BREAK_ON 0x01 struct uslcom_softc { USBBASEDEVICE sc_dev; usbd_device_handle sc_udev; usbd_interface_handle sc_iface; device_ptr_t sc_subdev; u_char sc_msr; u_char sc_lsr; u_char sc_dying; }; Static void uslcom_get_status(void *, int portno, u_char *lsr, u_char *msr); Static void uslcom_set(void *, int, int, int); Static int uslcom_param(void *, int, struct termios *); Static int uslcom_open(void *sc, int portno); Static void uslcom_close(void *, int); Static void uslcom_break(void *sc, int portno, int onoff); struct ucom_methods uslcom_methods = { uslcom_get_status, uslcom_set, uslcom_param, NULL, uslcom_open, uslcom_close, NULL, NULL, }; static const struct usb_devno uslcom_devs[] = { { USB_VENDOR_BALTECH, USB_PRODUCT_BALTECH_CARDREADER }, { USB_VENDOR_DYNASTREAM, USB_PRODUCT_DYNASTREAM_ANTDEVBOARD }, { USB_VENDOR_JABLOTRON, USB_PRODUCT_JABLOTRON_PC60B }, { USB_VENDOR_SILABS, USB_PRODUCT_SILABS_ARGUSISP }, { USB_VENDOR_SILABS, USB_PRODUCT_SILABS_CRUMB128 }, { USB_VENDOR_SILABS, USB_PRODUCT_SILABS_DEGREECONT }, { USB_VENDOR_SILABS, USB_PRODUCT_SILABS_DESKTOPMOBILE }, { USB_VENDOR_SILABS, USB_PRODUCT_SILABS_IPLINK1220 }, { USB_VENDOR_SILABS, USB_PRODUCT_SILABS_LIPOWSKY_HARP }, { USB_VENDOR_SILABS, USB_PRODUCT_SILABS_LIPOWSKY_JTAG }, { USB_VENDOR_SILABS, USB_PRODUCT_SILABS_LIPOWSKY_LIN }, { USB_VENDOR_SILABS, USB_PRODUCT_SILABS_POLOLU }, { USB_VENDOR_SILABS, USB_PRODUCT_SILABS_CP210X_1 }, { USB_VENDOR_SILABS, USB_PRODUCT_SILABS_CP210X_2 }, { USB_VENDOR_SILABS, USB_PRODUCT_SILABS_SUNNTO }, { USB_VENDOR_SILABS2, USB_PRODUCT_SILABS2_DCU11CLONE }, { USB_VENDOR_USI, USB_PRODUCT_USI_MC60 } }; USB_DECLARE_DRIVER(uslcom); USB_MATCH(uslcom) { USB_MATCH_START(uslcom, uaa); if (uaa->iface != NULL) return UMATCH_NONE; return (usb_lookup(uslcom_devs, uaa->vendor, uaa->product) != NULL) ? UMATCH_VENDOR_PRODUCT : UMATCH_NONE; } USB_ATTACH(uslcom) { USB_ATTACH_START(uslcom, sc, uaa); struct ucom_attach_args uca; usb_interface_descriptor_t *id; usb_endpoint_descriptor_t *ed; usbd_status error; char *devinfop; int i; bzero(&uca, sizeof(uca)); sc->sc_udev = uaa->device; devinfop = usbd_devinfo_alloc(uaa->device, 0); USB_ATTACH_SETUP; printf("%s: %s\n", USBDEVNAME(sc->sc_dev), devinfop); usbd_devinfo_free(devinfop); if (usbd_set_config_index(sc->sc_udev, USLCOM_CONFIG_NO, 1) != 0) { printf("%s: could not set configuration no\n", USBDEVNAME(sc->sc_dev)); sc->sc_dying = 1; USB_ATTACH_ERROR_RETURN; } /* get the first interface handle */ error = usbd_device2interface_handle(sc->sc_udev, USLCOM_IFACE_NO, &sc->sc_iface); if (error != 0) { printf("%s: could not get interface handle\n", USBDEVNAME(sc->sc_dev)); sc->sc_dying = 1; USB_ATTACH_ERROR_RETURN; } id = usbd_get_interface_descriptor(sc->sc_iface); uca.bulkin = uca.bulkout = -1; for (i = 0; i < id->bNumEndpoints; i++) { ed = usbd_interface2endpoint_descriptor(sc->sc_iface, i); if (ed == NULL) { printf("%s: no endpoint descriptor found for %d\n", USBDEVNAME(sc->sc_dev), i); sc->sc_dying = 1; USB_ATTACH_ERROR_RETURN; } if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_IN && UE_GET_XFERTYPE(ed->bmAttributes) == UE_BULK) uca.bulkin = ed->bEndpointAddress; else if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_OUT && UE_GET_XFERTYPE(ed->bmAttributes) == UE_BULK) uca.bulkout = ed->bEndpointAddress; } if (uca.bulkin == -1 || uca.bulkout == -1) { printf("%s: missing endpoint\n", USBDEVNAME(sc->sc_dev)); sc->sc_dying = 1; USB_ATTACH_ERROR_RETURN; } uca.ibufsize = USLCOMBUFSZ; uca.obufsize = USLCOMBUFSZ; uca.ibufsizepad = USLCOMBUFSZ; uca.opkthdrlen = 0; uca.device = sc->sc_udev; uca.iface = sc->sc_iface; uca.methods = &uslcom_methods; uca.arg = sc; uca.info = NULL; usbd_add_drv_event(USB_EVENT_DRIVER_ATTACH, sc->sc_udev, USBDEV(sc->sc_dev)); sc->sc_subdev = config_found_sm(self, &uca, ucomprint, ucomsubmatch); USB_ATTACH_SUCCESS_RETURN; } USB_DETACH(uslcom) { USB_DETACH_START(uslcom, sc); int rv = 0; sc->sc_dying = 1; if (sc->sc_subdev != NULL) { rv = config_detach(sc->sc_subdev, flags); sc->sc_subdev = NULL; } usbd_add_drv_event(USB_EVENT_DRIVER_DETACH, sc->sc_udev, USBDEV(sc->sc_dev)); return (rv); } int uslcom_activate(device_ptr_t self, enum devact act) { struct uslcom_softc *sc = (struct uslcom_softc *)self; int rv = 0; switch (act) { case DVACT_ACTIVATE: break; case DVACT_DEACTIVATE: if (sc->sc_subdev != NULL) rv = config_deactivate(sc->sc_subdev); sc->sc_dying = 1; break; } return (rv); } Static int uslcom_open(void *vsc, int portno) { struct uslcom_softc *sc = vsc; usb_device_request_t req; usbd_status err; if (sc->sc_dying) return (EIO); req.bmRequestType = USLCOM_WRITE; req.bRequest = USLCOM_UART; USETW(req.wValue, USLCOM_UART_ENABLE); USETW(req.wIndex, portno); USETW(req.wLength, 0); err = usbd_do_request(sc->sc_udev, &req, NULL); if (err) return (EIO); return (0); } Static void uslcom_close(void *vsc, int portno) { struct uslcom_softc *sc = vsc; usb_device_request_t req; if (sc->sc_dying) return; req.bmRequestType = USLCOM_WRITE; req.bRequest = USLCOM_UART; USETW(req.wValue, USLCOM_UART_DISABLE); USETW(req.wIndex, portno); USETW(req.wLength, 0); usbd_do_request(sc->sc_udev, &req, NULL); } Static void uslcom_set(void *vsc, int portno, int reg, int onoff) { struct uslcom_softc *sc = vsc; usb_device_request_t req; int ctl; switch (reg) { case UCOM_SET_DTR: ctl = onoff ? USLCOM_CTRL_DTR_ON : 0; ctl |= USLCOM_CTRL_DTR_SET; break; case UCOM_SET_RTS: ctl = onoff ? USLCOM_CTRL_RTS_ON : 0; ctl |= USLCOM_CTRL_RTS_SET; break; case UCOM_SET_BREAK: uslcom_break(sc, portno, onoff); return; default: return; } req.bmRequestType = USLCOM_WRITE; req.bRequest = USLCOM_CTRL; USETW(req.wValue, ctl); USETW(req.wIndex, portno); USETW(req.wLength, 0); usbd_do_request(sc->sc_udev, &req, NULL); } Static int uslcom_param(void *vsc, int portno, struct termios *t) { struct uslcom_softc *sc = (struct uslcom_softc *)vsc; usbd_status err; usb_device_request_t req; int data; switch (t->c_ospeed) { case 600: case 1200: case 1800: case 2400: case 4800: case 9600: case 19200: case 38400: case 57600: case 115200: case 460800: case 921600: req.bmRequestType = USLCOM_WRITE; req.bRequest = USLCOM_BAUD_RATE; USETW(req.wValue, USLCOM_BAUD_REF / t->c_ospeed); USETW(req.wIndex, portno); USETW(req.wLength, 0); err = usbd_do_request(sc->sc_udev, &req, NULL); if (err) return (EIO); break; default: return (EINVAL); } if (ISSET(t->c_cflag, CSTOPB)) data = USLCOM_STOP_BITS_2; else data = USLCOM_STOP_BITS_1; if (ISSET(t->c_cflag, PARENB)) { if (ISSET(t->c_cflag, PARODD)) data |= USLCOM_PARITY_ODD; else data |= USLCOM_PARITY_EVEN; } else data |= USLCOM_PARITY_NONE; switch (ISSET(t->c_cflag, CSIZE)) { case CS5: data |= USLCOM_SET_DATA_BITS(5); break; case CS6: data |= USLCOM_SET_DATA_BITS(6); break; case CS7: data |= USLCOM_SET_DATA_BITS(7); break; case CS8: data |= USLCOM_SET_DATA_BITS(8); break; } req.bmRequestType = USLCOM_WRITE; req.bRequest = USLCOM_DATA; USETW(req.wValue, data); USETW(req.wIndex, portno); USETW(req.wLength, 0); err = usbd_do_request(sc->sc_udev, &req, NULL); if (err) return (EIO); #if 0 /* XXX flow control */ if (ISSET(t->c_cflag, CRTSCTS)) /* rts/cts flow ctl */ } else if (ISSET(t->c_iflag, IXON|IXOFF)) { /* xon/xoff flow ctl */ } else { /* disable flow ctl */ } #endif return (0); } void uslcom_get_status(void *vsc, int portno, u_char *lsr, u_char *msr) { struct uslcom_softc *sc = vsc; if (msr != NULL) *msr = sc->sc_msr; if (lsr != NULL) *lsr = sc->sc_lsr; } void uslcom_break(void *vsc, int portno, int onoff) { struct uslcom_softc *sc = vsc; usb_device_request_t req; int brk = onoff ? USLCOM_BREAK_ON : USLCOM_BREAK_OFF; req.bmRequestType = USLCOM_WRITE; req.bRequest = USLCOM_BREAK; USETW(req.wValue, brk); USETW(req.wIndex, portno); USETW(req.wLength, 0); usbd_do_request(sc->sc_udev, &req, NULL); }