/* $OpenBSD: xhci.c,v 1.101 2019/03/17 22:05:37 mglocker Exp $ */ /* * Copyright (c) 2014-2015 Martin Pieuchot * * Permission to use, copy, modify, and distribute this software for any * purpose with or without fee is hereby granted, provided that the above * copyright notice and this permission notice appear in all copies. * * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include struct cfdriver xhci_cd = { NULL, "xhci", DV_DULL }; #ifdef XHCI_DEBUG #define DPRINTF(x) do { if (xhcidebug) printf x; } while(0) #define DPRINTFN(n,x) do { if (xhcidebug>(n)) printf x; } while (0) int xhcidebug = 3; #else #define DPRINTF(x) #define DPRINTFN(n,x) #endif #define DEVNAME(sc) ((sc)->sc_bus.bdev.dv_xname) #define TRBOFF(r, trb) ((char *)(trb) - (char *)((r)->trbs)) #define DEQPTR(r) ((r).dma.paddr + (sizeof(struct xhci_trb) * (r).index)) struct pool *xhcixfer; struct xhci_pipe { struct usbd_pipe pipe; uint8_t dci; uint8_t slot; /* Device slot ID */ struct xhci_ring ring; /* * XXX used to pass the xfer pointer back to the * interrupt routine, better way? */ struct usbd_xfer *pending_xfers[XHCI_MAX_XFER]; struct usbd_xfer *aborted_xfer; int halted; size_t free_trbs; }; int xhci_reset(struct xhci_softc *); int xhci_intr1(struct xhci_softc *); void xhci_event_dequeue(struct xhci_softc *); void xhci_event_xfer(struct xhci_softc *, uint64_t, uint32_t, uint32_t); int xhci_event_xfer_generic(struct xhci_softc *, struct usbd_xfer *, struct xhci_pipe *, uint32_t, int, uint8_t, uint8_t, uint8_t); int xhci_event_xfer_isoc(struct usbd_xfer *, struct xhci_pipe *, uint32_t, int); void xhci_event_command(struct xhci_softc *, uint64_t); void xhci_event_port_change(struct xhci_softc *, uint64_t, uint32_t); int xhci_pipe_init(struct xhci_softc *, struct usbd_pipe *); int xhci_context_setup(struct xhci_softc *, struct usbd_pipe *); int xhci_scratchpad_alloc(struct xhci_softc *, int); void xhci_scratchpad_free(struct xhci_softc *); int xhci_softdev_alloc(struct xhci_softc *, uint8_t); void xhci_softdev_free(struct xhci_softc *, uint8_t); int xhci_ring_alloc(struct xhci_softc *, struct xhci_ring *, size_t, size_t); void xhci_ring_free(struct xhci_softc *, struct xhci_ring *); void xhci_ring_reset(struct xhci_softc *, struct xhci_ring *); struct xhci_trb *xhci_ring_consume(struct xhci_softc *, struct xhci_ring *); struct xhci_trb *xhci_ring_produce(struct xhci_softc *, struct xhci_ring *); struct xhci_trb *xhci_xfer_get_trb(struct xhci_softc *, struct usbd_xfer*, uint8_t *, int); void xhci_xfer_done(struct usbd_xfer *xfer); /* xHCI command helpers. */ int xhci_command_submit(struct xhci_softc *, struct xhci_trb *, int); int xhci_command_abort(struct xhci_softc *); void xhci_cmd_reset_ep_async(struct xhci_softc *, uint8_t, uint8_t); void xhci_cmd_set_tr_deq_async(struct xhci_softc *, uint8_t, uint8_t, uint64_t); int xhci_cmd_configure_ep(struct xhci_softc *, uint8_t, uint64_t); int xhci_cmd_stop_ep(struct xhci_softc *, uint8_t, uint8_t); int xhci_cmd_slot_control(struct xhci_softc *, uint8_t *, int); int xhci_cmd_set_address(struct xhci_softc *, uint8_t, uint64_t, uint32_t); int xhci_cmd_evaluate_ctx(struct xhci_softc *, uint8_t, uint64_t); #ifdef XHCI_DEBUG int xhci_cmd_noop(struct xhci_softc *); #endif /* XXX should be part of the Bus interface. */ void xhci_abort_xfer(struct usbd_xfer *, usbd_status); void xhci_pipe_close(struct usbd_pipe *); void xhci_noop(struct usbd_xfer *); void xhci_timeout(void *); void xhci_timeout_task(void *); /* USBD Bus Interface. */ usbd_status xhci_pipe_open(struct usbd_pipe *); int xhci_setaddr(struct usbd_device *, int); void xhci_softintr(void *); void xhci_poll(struct usbd_bus *); struct usbd_xfer *xhci_allocx(struct usbd_bus *); void xhci_freex(struct usbd_bus *, struct usbd_xfer *); usbd_status xhci_root_ctrl_transfer(struct usbd_xfer *); usbd_status xhci_root_ctrl_start(struct usbd_xfer *); usbd_status xhci_root_intr_transfer(struct usbd_xfer *); usbd_status xhci_root_intr_start(struct usbd_xfer *); void xhci_root_intr_abort(struct usbd_xfer *); void xhci_root_intr_done(struct usbd_xfer *); usbd_status xhci_device_ctrl_transfer(struct usbd_xfer *); usbd_status xhci_device_ctrl_start(struct usbd_xfer *); void xhci_device_ctrl_abort(struct usbd_xfer *); usbd_status xhci_device_generic_transfer(struct usbd_xfer *); usbd_status xhci_device_generic_start(struct usbd_xfer *); void xhci_device_generic_abort(struct usbd_xfer *); void xhci_device_generic_done(struct usbd_xfer *); usbd_status xhci_device_isoc_transfer(struct usbd_xfer *); usbd_status xhci_device_isoc_start(struct usbd_xfer *); #define XHCI_INTR_ENDPT 1 struct usbd_bus_methods xhci_bus_methods = { .open_pipe = xhci_pipe_open, .dev_setaddr = xhci_setaddr, .soft_intr = xhci_softintr, .do_poll = xhci_poll, .allocx = xhci_allocx, .freex = xhci_freex, }; struct usbd_pipe_methods xhci_root_ctrl_methods = { .transfer = xhci_root_ctrl_transfer, .start = xhci_root_ctrl_start, .abort = xhci_noop, .close = xhci_pipe_close, .done = xhci_noop, }; struct usbd_pipe_methods xhci_root_intr_methods = { .transfer = xhci_root_intr_transfer, .start = xhci_root_intr_start, .abort = xhci_root_intr_abort, .close = xhci_pipe_close, .done = xhci_root_intr_done, }; struct usbd_pipe_methods xhci_device_ctrl_methods = { .transfer = xhci_device_ctrl_transfer, .start = xhci_device_ctrl_start, .abort = xhci_device_ctrl_abort, .close = xhci_pipe_close, .done = xhci_noop, }; struct usbd_pipe_methods xhci_device_intr_methods = { .transfer = xhci_device_generic_transfer, .start = xhci_device_generic_start, .abort = xhci_device_generic_abort, .close = xhci_pipe_close, .done = xhci_device_generic_done, }; struct usbd_pipe_methods xhci_device_bulk_methods = { .transfer = xhci_device_generic_transfer, .start = xhci_device_generic_start, .abort = xhci_device_generic_abort, .close = xhci_pipe_close, .done = xhci_device_generic_done, }; struct usbd_pipe_methods xhci_device_isoc_methods = { .transfer = xhci_device_isoc_transfer, .start = xhci_device_isoc_start, .abort = xhci_device_generic_abort, .close = xhci_pipe_close, .done = xhci_noop, }; #ifdef XHCI_DEBUG static void xhci_dump_trb(struct xhci_trb *trb) { printf("trb=%p (0x%016llx 0x%08x 0x%b)\n", trb, (long long)letoh64(trb->trb_paddr), letoh32(trb->trb_status), (int)letoh32(trb->trb_flags), XHCI_TRB_FLAGS_BITMASK); } #endif int usbd_dma_contig_alloc(struct usbd_bus *, struct usbd_dma_info *, void **, bus_size_t, bus_size_t, bus_size_t); void usbd_dma_contig_free(struct usbd_bus *, struct usbd_dma_info *); int usbd_dma_contig_alloc(struct usbd_bus *bus, struct usbd_dma_info *dma, void **kvap, bus_size_t size, bus_size_t alignment, bus_size_t boundary) { int error; dma->tag = bus->dmatag; dma->size = size; error = bus_dmamap_create(dma->tag, size, 1, size, boundary, BUS_DMA_NOWAIT, &dma->map); if (error != 0) return (error); error = bus_dmamem_alloc(dma->tag, size, alignment, boundary, &dma->seg, 1, &dma->nsegs, BUS_DMA_NOWAIT | BUS_DMA_ZERO); if (error != 0) goto destroy; error = bus_dmamem_map(dma->tag, &dma->seg, 1, size, &dma->vaddr, BUS_DMA_NOWAIT | BUS_DMA_COHERENT); if (error != 0) goto free; error = bus_dmamap_load_raw(dma->tag, dma->map, &dma->seg, 1, size, BUS_DMA_NOWAIT); if (error != 0) goto unmap; bus_dmamap_sync(dma->tag, dma->map, 0, size, BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE); dma->paddr = dma->map->dm_segs[0].ds_addr; if (kvap != NULL) *kvap = dma->vaddr; return (0); unmap: bus_dmamem_unmap(dma->tag, dma->vaddr, size); free: bus_dmamem_free(dma->tag, &dma->seg, 1); destroy: bus_dmamap_destroy(dma->tag, dma->map); return (error); } void usbd_dma_contig_free(struct usbd_bus *bus, struct usbd_dma_info *dma) { if (dma->map != NULL) { bus_dmamap_sync(bus->dmatag, dma->map, 0, dma->size, BUS_DMASYNC_POSTREAD | BUS_DMASYNC_POSTWRITE); bus_dmamap_unload(bus->dmatag, dma->map); bus_dmamem_unmap(bus->dmatag, dma->vaddr, dma->size); bus_dmamem_free(bus->dmatag, &dma->seg, 1); bus_dmamap_destroy(bus->dmatag, dma->map); dma->map = NULL; } } int xhci_init(struct xhci_softc *sc) { uint32_t hcr; int npage, error; sc->sc_bus.usbrev = USBREV_3_0; sc->sc_bus.methods = &xhci_bus_methods; sc->sc_bus.pipe_size = sizeof(struct xhci_pipe); sc->sc_oper_off = XREAD1(sc, XHCI_CAPLENGTH); sc->sc_door_off = XREAD4(sc, XHCI_DBOFF); sc->sc_runt_off = XREAD4(sc, XHCI_RTSOFF); sc->sc_version = XREAD2(sc, XHCI_HCIVERSION); printf(", xHCI %x.%x\n", sc->sc_version >> 8, sc->sc_version & 0xff); #ifdef XHCI_DEBUG printf("%s: CAPLENGTH=%#lx\n", DEVNAME(sc), sc->sc_oper_off); printf("%s: DOORBELL=%#lx\n", DEVNAME(sc), sc->sc_door_off); printf("%s: RUNTIME=%#lx\n", DEVNAME(sc), sc->sc_runt_off); #endif error = xhci_reset(sc); if (error) return (error); if (xhcixfer == NULL) { xhcixfer = malloc(sizeof(struct pool), M_DEVBUF, M_NOWAIT); if (xhcixfer == NULL) { printf("%s: unable to allocate pool descriptor\n", DEVNAME(sc)); return (ENOMEM); } pool_init(xhcixfer, sizeof(struct xhci_xfer), 0, IPL_SOFTUSB, 0, "xhcixfer", NULL); } hcr = XREAD4(sc, XHCI_HCCPARAMS); sc->sc_ctxsize = XHCI_HCC_CSZ(hcr) ? 64 : 32; DPRINTF(("%s: %d bytes context\n", DEVNAME(sc), sc->sc_ctxsize)); #ifdef XHCI_DEBUG hcr = XOREAD4(sc, XHCI_PAGESIZE); printf("%s: supported page size 0x%08x\n", DEVNAME(sc), hcr); #endif /* Use 4K for the moment since it's easier. */ sc->sc_pagesize = 4096; /* Get port and device slot numbers. */ hcr = XREAD4(sc, XHCI_HCSPARAMS1); sc->sc_noport = XHCI_HCS1_N_PORTS(hcr); sc->sc_noslot = XHCI_HCS1_DEVSLOT_MAX(hcr); DPRINTF(("%s: %d ports and %d slots\n", DEVNAME(sc), sc->sc_noport, sc->sc_noslot)); /* Setup Device Context Base Address Array. */ error = usbd_dma_contig_alloc(&sc->sc_bus, &sc->sc_dcbaa.dma, (void **)&sc->sc_dcbaa.segs, (sc->sc_noslot + 1) * sizeof(uint64_t), XHCI_DCBAA_ALIGN, sc->sc_pagesize); if (error) return (ENOMEM); /* Setup command ring. */ rw_init(&sc->sc_cmd_lock, "xhcicmd"); error = xhci_ring_alloc(sc, &sc->sc_cmd_ring, XHCI_MAX_CMDS, XHCI_CMDS_RING_ALIGN); if (error) { printf("%s: could not allocate command ring.\n", DEVNAME(sc)); usbd_dma_contig_free(&sc->sc_bus, &sc->sc_dcbaa.dma); return (error); } /* Setup one event ring and its segment table (ERST). */ error = xhci_ring_alloc(sc, &sc->sc_evt_ring, XHCI_MAX_EVTS, XHCI_EVTS_RING_ALIGN); if (error) { printf("%s: could not allocate event ring.\n", DEVNAME(sc)); xhci_ring_free(sc, &sc->sc_cmd_ring); usbd_dma_contig_free(&sc->sc_bus, &sc->sc_dcbaa.dma); return (error); } /* Allocate the required entry for the segment table. */ error = usbd_dma_contig_alloc(&sc->sc_bus, &sc->sc_erst.dma, (void **)&sc->sc_erst.segs, sizeof(struct xhci_erseg), XHCI_ERST_ALIGN, XHCI_ERST_BOUNDARY); if (error) { printf("%s: could not allocate segment table.\n", DEVNAME(sc)); xhci_ring_free(sc, &sc->sc_evt_ring); xhci_ring_free(sc, &sc->sc_cmd_ring); usbd_dma_contig_free(&sc->sc_bus, &sc->sc_dcbaa.dma); return (ENOMEM); } /* Set our ring address and size in its corresponding segment. */ sc->sc_erst.segs[0].er_addr = htole64(sc->sc_evt_ring.dma.paddr); sc->sc_erst.segs[0].er_size = htole32(XHCI_MAX_EVTS); sc->sc_erst.segs[0].er_rsvd = 0; bus_dmamap_sync(sc->sc_erst.dma.tag, sc->sc_erst.dma.map, 0, sc->sc_erst.dma.size, BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE); /* Get the number of scratch pages and configure them if necessary. */ hcr = XREAD4(sc, XHCI_HCSPARAMS2); npage = XHCI_HCS2_SPB_MAX(hcr); DPRINTF(("%s: %u scratch pages, ETE=%u, IST=0x%x\n", DEVNAME(sc), npage, XHCI_HCS2_ETE(hcr), XHCI_HCS2_IST(hcr))); if (npage > 0 && xhci_scratchpad_alloc(sc, npage)) { printf("%s: could not allocate scratchpad.\n", DEVNAME(sc)); usbd_dma_contig_free(&sc->sc_bus, &sc->sc_erst.dma); xhci_ring_free(sc, &sc->sc_evt_ring); xhci_ring_free(sc, &sc->sc_cmd_ring); usbd_dma_contig_free(&sc->sc_bus, &sc->sc_dcbaa.dma); return (ENOMEM); } return (0); } void xhci_config(struct xhci_softc *sc) { uint64_t paddr; uint32_t hcr; /* Make sure to program a number of device slots we can handle. */ if (sc->sc_noslot > USB_MAX_DEVICES) sc->sc_noslot = USB_MAX_DEVICES; hcr = XOREAD4(sc, XHCI_CONFIG) & ~XHCI_CONFIG_SLOTS_MASK; XOWRITE4(sc, XHCI_CONFIG, hcr | sc->sc_noslot); /* Set the device context base array address. */ paddr = (uint64_t)sc->sc_dcbaa.dma.paddr; XOWRITE4(sc, XHCI_DCBAAP_LO, (uint32_t)paddr); XOWRITE4(sc, XHCI_DCBAAP_HI, (uint32_t)(paddr >> 32)); DPRINTF(("%s: DCBAAP=%#x%#x\n", DEVNAME(sc), XOREAD4(sc, XHCI_DCBAAP_HI), XOREAD4(sc, XHCI_DCBAAP_LO))); /* Set the command ring address. */ paddr = (uint64_t)sc->sc_cmd_ring.dma.paddr; XOWRITE4(sc, XHCI_CRCR_LO, ((uint32_t)paddr) | XHCI_CRCR_LO_RCS); XOWRITE4(sc, XHCI_CRCR_HI, (uint32_t)(paddr >> 32)); DPRINTF(("%s: CRCR=%#x%#x (%016llx)\n", DEVNAME(sc), XOREAD4(sc, XHCI_CRCR_HI), XOREAD4(sc, XHCI_CRCR_LO), paddr)); /* Set the ERST count number to 1, since we use only one event ring. */ XRWRITE4(sc, XHCI_ERSTSZ(0), XHCI_ERSTS_SET(1)); /* Set the segment table address. */ paddr = (uint64_t)sc->sc_erst.dma.paddr; XRWRITE4(sc, XHCI_ERSTBA_LO(0), (uint32_t)paddr); XRWRITE4(sc, XHCI_ERSTBA_HI(0), (uint32_t)(paddr >> 32)); DPRINTF(("%s: ERSTBA=%#x%#x\n", DEVNAME(sc), XRREAD4(sc, XHCI_ERSTBA_HI(0)), XRREAD4(sc, XHCI_ERSTBA_LO(0)))); /* Set the ring dequeue address. */ paddr = (uint64_t)sc->sc_evt_ring.dma.paddr; XRWRITE4(sc, XHCI_ERDP_LO(0), (uint32_t)paddr); XRWRITE4(sc, XHCI_ERDP_HI(0), (uint32_t)(paddr >> 32)); DPRINTF(("%s: ERDP=%#x%#x\n", DEVNAME(sc), XRREAD4(sc, XHCI_ERDP_HI(0)), XRREAD4(sc, XHCI_ERDP_LO(0)))); /* Enable interrupts. */ hcr = XRREAD4(sc, XHCI_IMAN(0)); XRWRITE4(sc, XHCI_IMAN(0), hcr | XHCI_IMAN_INTR_ENA); /* Set default interrupt moderation. */ XRWRITE4(sc, XHCI_IMOD(0), XHCI_IMOD_DEFAULT); /* Allow event interrupt and start the controller. */ XOWRITE4(sc, XHCI_USBCMD, XHCI_CMD_INTE|XHCI_CMD_RS); DPRINTF(("%s: USBCMD=%#x\n", DEVNAME(sc), XOREAD4(sc, XHCI_USBCMD))); DPRINTF(("%s: IMAN=%#x\n", DEVNAME(sc), XRREAD4(sc, XHCI_IMAN(0)))); } int xhci_detach(struct device *self, int flags) { struct xhci_softc *sc = (struct xhci_softc *)self; int rv; rv = config_detach_children(self, flags); if (rv != 0) { printf("%s: error while detaching %d\n", DEVNAME(sc), rv); return (rv); } /* Since the hardware might already be gone, ignore the errors. */ xhci_command_abort(sc); xhci_reset(sc); /* Disable interrupts. */ XRWRITE4(sc, XHCI_IMOD(0), 0); XRWRITE4(sc, XHCI_IMAN(0), 0); /* Clear the event ring address. */ XRWRITE4(sc, XHCI_ERDP_LO(0), 0); XRWRITE4(sc, XHCI_ERDP_HI(0), 0); XRWRITE4(sc, XHCI_ERSTBA_LO(0), 0); XRWRITE4(sc, XHCI_ERSTBA_HI(0), 0); XRWRITE4(sc, XHCI_ERSTSZ(0), 0); /* Clear the command ring address. */ XOWRITE4(sc, XHCI_CRCR_LO, 0); XOWRITE4(sc, XHCI_CRCR_HI, 0); XOWRITE4(sc, XHCI_DCBAAP_LO, 0); XOWRITE4(sc, XHCI_DCBAAP_HI, 0); if (sc->sc_spad.npage > 0) xhci_scratchpad_free(sc); usbd_dma_contig_free(&sc->sc_bus, &sc->sc_erst.dma); xhci_ring_free(sc, &sc->sc_evt_ring); xhci_ring_free(sc, &sc->sc_cmd_ring); usbd_dma_contig_free(&sc->sc_bus, &sc->sc_dcbaa.dma); return (0); } int xhci_activate(struct device *self, int act) { struct xhci_softc *sc = (struct xhci_softc *)self; int rv = 0; switch (act) { case DVACT_RESUME: sc->sc_bus.use_polling++; xhci_reset(sc); xhci_ring_reset(sc, &sc->sc_cmd_ring); xhci_ring_reset(sc, &sc->sc_evt_ring); /* Renesas controllers, at least, need more time to resume. */ usb_delay_ms(&sc->sc_bus, USB_RESUME_WAIT); xhci_config(sc); sc->sc_bus.use_polling--; rv = config_activate_children(self, act); break; case DVACT_POWERDOWN: rv = config_activate_children(self, act); xhci_reset(sc); break; default: rv = config_activate_children(self, act); break; } return (rv); } int xhci_reset(struct xhci_softc *sc) { uint32_t hcr; int i; XOWRITE4(sc, XHCI_USBCMD, 0); /* Halt controller */ for (i = 0; i < 100; i++) { usb_delay_ms(&sc->sc_bus, 1); hcr = XOREAD4(sc, XHCI_USBSTS) & XHCI_STS_HCH; if (hcr) break; } if (!hcr) printf("%s: halt timeout\n", DEVNAME(sc)); XOWRITE4(sc, XHCI_USBCMD, XHCI_CMD_HCRST); for (i = 0; i < 100; i++) { usb_delay_ms(&sc->sc_bus, 1); hcr = (XOREAD4(sc, XHCI_USBCMD) & XHCI_CMD_HCRST) | (XOREAD4(sc, XHCI_USBSTS) & XHCI_STS_CNR); if (!hcr) break; } if (hcr) { printf("%s: reset timeout\n", DEVNAME(sc)); return (EIO); } return (0); } int xhci_intr(void *v) { struct xhci_softc *sc = v; if (sc == NULL || sc->sc_bus.dying) return (0); /* If we get an interrupt while polling, then just ignore it. */ if (sc->sc_bus.use_polling) { DPRINTFN(16, ("xhci_intr: ignored interrupt while polling\n")); return (0); } return (xhci_intr1(sc)); } int xhci_intr1(struct xhci_softc *sc) { uint32_t intrs; intrs = XOREAD4(sc, XHCI_USBSTS); if (intrs == 0xffffffff) { sc->sc_bus.dying = 1; return (0); } if ((intrs & XHCI_STS_EINT) == 0) return (0); sc->sc_bus.no_intrs++; if (intrs & XHCI_STS_HSE) { printf("%s: host system error\n", DEVNAME(sc)); sc->sc_bus.dying = 1; return (1); } XOWRITE4(sc, XHCI_USBSTS, intrs); /* Acknowledge */ usb_schedsoftintr(&sc->sc_bus); /* Acknowledge PCI interrupt */ intrs = XRREAD4(sc, XHCI_IMAN(0)); XRWRITE4(sc, XHCI_IMAN(0), intrs | XHCI_IMAN_INTR_PEND); return (1); } void xhci_poll(struct usbd_bus *bus) { struct xhci_softc *sc = (struct xhci_softc *)bus; if (XOREAD4(sc, XHCI_USBSTS)) xhci_intr1(sc); } void xhci_softintr(void *v) { struct xhci_softc *sc = v; if (sc->sc_bus.dying) return; sc->sc_bus.intr_context++; xhci_event_dequeue(sc); sc->sc_bus.intr_context--; } void xhci_event_dequeue(struct xhci_softc *sc) { struct xhci_trb *trb; uint64_t paddr; uint32_t status, flags; while ((trb = xhci_ring_consume(sc, &sc->sc_evt_ring)) != NULL) { paddr = letoh64(trb->trb_paddr); status = letoh32(trb->trb_status); flags = letoh32(trb->trb_flags); switch (flags & XHCI_TRB_TYPE_MASK) { case XHCI_EVT_XFER: xhci_event_xfer(sc, paddr, status, flags); break; case XHCI_EVT_CMD_COMPLETE: memcpy(&sc->sc_result_trb, trb, sizeof(*trb)); xhci_event_command(sc, paddr); break; case XHCI_EVT_PORT_CHANGE: xhci_event_port_change(sc, paddr, status); break; case XHCI_EVT_HOST_CTRL: /* TODO */ break; default: #ifdef XHCI_DEBUG printf("event (%d): ", XHCI_TRB_TYPE(flags)); xhci_dump_trb(trb); #endif break; } } paddr = (uint64_t)DEQPTR(sc->sc_evt_ring); XRWRITE4(sc, XHCI_ERDP_LO(0), ((uint32_t)paddr) | XHCI_ERDP_LO_BUSY); XRWRITE4(sc, XHCI_ERDP_HI(0), (uint32_t)(paddr >> 32)); } void xhci_event_xfer(struct xhci_softc *sc, uint64_t paddr, uint32_t status, uint32_t flags) { struct xhci_pipe *xp; struct usbd_xfer *xfer; uint8_t dci, slot, code, xfertype; uint32_t remain; int trb_idx; slot = XHCI_TRB_GET_SLOT(flags); dci = XHCI_TRB_GET_EP(flags); if (slot > sc->sc_noslot) { DPRINTF(("%s: incorrect slot (%u)\n", DEVNAME(sc), slot)); return; } xp = sc->sc_sdevs[slot].pipes[dci - 1]; if (xp == NULL) { DPRINTF(("%s: incorrect dci (%u)\n", DEVNAME(sc), dci)); return; } code = XHCI_TRB_GET_CODE(status); remain = XHCI_TRB_REMAIN(status); switch (code) { case XHCI_CODE_RING_UNDERRUN: DPRINTF(("%s: slot %u underrun with %zu TRB\n", DEVNAME(sc), slot, xp->ring.ntrb - xp->free_trbs)); return; case XHCI_CODE_RING_OVERRUN: DPRINTF(("%s: slot %u overrun with %zu TRB\n", DEVNAME(sc), slot, xp->ring.ntrb - xp->free_trbs)); return; default: break; } trb_idx = (paddr - xp->ring.dma.paddr) / sizeof(struct xhci_trb); if (trb_idx < 0 || trb_idx >= xp->ring.ntrb) { printf("%s: wrong trb index (%u) max is %zu\n", DEVNAME(sc), trb_idx, xp->ring.ntrb - 1); return; } xfer = xp->pending_xfers[trb_idx]; if (xfer == NULL) { printf("%s: NULL xfer pointer\n", DEVNAME(sc)); return; } if (remain > xfer->length) remain = xfer->length; xfertype = UE_GET_XFERTYPE(xfer->pipe->endpoint->edesc->bmAttributes); switch (xfertype) { case UE_BULK: case UE_INTERRUPT: case UE_CONTROL: if (xhci_event_xfer_generic(sc, xfer, xp, remain, trb_idx, code, slot, dci)) return; break; case UE_ISOCHRONOUS: if (xhci_event_xfer_isoc(xfer, xp, remain, trb_idx)) return; break; default: panic("xhci_event_xfer: unknown xfer type %u", xfertype); } xhci_xfer_done(xfer); } int xhci_event_xfer_generic(struct xhci_softc *sc, struct usbd_xfer *xfer, struct xhci_pipe *xp, uint32_t remain, int trb_idx, uint8_t code, uint8_t slot, uint8_t dci) { struct xhci_xfer *xx = (struct xhci_xfer *)xfer; switch (code) { case XHCI_CODE_SUCCESS: /* * This might be the last TRB of a TD that ended up * with a Short Transfer condition, see below. */ if (xfer->actlen == 0) xfer->actlen = xfer->length - remain; xfer->status = USBD_NORMAL_COMPLETION; break; case XHCI_CODE_SHORT_XFER: xfer->actlen = xfer->length - remain; /* * If this is not the last TRB of a transfer, we should * theoretically clear the IOC at the end of the chain * but the HC might have already processed it before we * had a chance to schedule the softinterrupt. */ if (xx->index != trb_idx) { DPRINTF(("%s: short xfer %p for %u\n", DEVNAME(sc), xfer, xx->index)); return (1); } xfer->status = USBD_NORMAL_COMPLETION; break; case XHCI_CODE_TXERR: case XHCI_CODE_SPLITERR: DPRINTF(("%s: txerr? code %d\n", DEVNAME(sc), code)); xfer->status = USBD_IOERROR; break; case XHCI_CODE_STALL: case XHCI_CODE_BABBLE: DPRINTF(("%s: babble code %d\n", DEVNAME(sc), code)); /* Prevent any timeout to kick in. */ timeout_del(&xfer->timeout_handle); usb_rem_task(xfer->device, &xfer->abort_task); /* We need to report this condition for umass(4). */ if (code == XHCI_CODE_STALL) xp->halted = USBD_STALLED; else xp->halted = USBD_IOERROR; /* * Since the stack might try to start a new transfer as * soon as a pending one finishes, make sure the endpoint * is fully reset before calling usb_transfer_complete(). */ xp->aborted_xfer = xfer; xhci_cmd_reset_ep_async(sc, slot, dci); return (1); case XHCI_CODE_XFER_STOPPED: case XHCI_CODE_XFER_STOPINV: /* Endpoint stopped while processing a TD. */ if (xfer == xp->aborted_xfer) { DPRINTF(("%s: stopped xfer=%p\n", __func__, xfer)); return (1); } /* FALLTHROUGH */ default: DPRINTF(("%s: unhandled code %d\n", DEVNAME(sc), code)); xfer->status = USBD_IOERROR; xp->halted = 1; break; } return (0); } int xhci_event_xfer_isoc(struct usbd_xfer *xfer, struct xhci_pipe *xp, uint32_t remain, int trb_idx) { struct xhci_xfer *xx = (struct xhci_xfer *)xfer; int trb0_idx, frame_idx = 0; KASSERT(xx->index >= 0); trb0_idx = ((xx->index + xp->ring.ntrb) - xx->ntrb) % (xp->ring.ntrb - 1); /* Find the according frame index for this TRB. */ while (trb0_idx != trb_idx) { if ((xp->ring.trbs[trb0_idx].trb_flags & XHCI_TRB_TYPE_MASK) == XHCI_TRB_TYPE_ISOCH) frame_idx++; if (trb0_idx++ == (xp->ring.ntrb - 1)) trb0_idx = 0; } /* * If we queued two TRBs for a frame and this is the second TRB, * check if the first TRB needs accounting since it might not have * raised an interrupt in case of full data received. */ if ((xp->ring.trbs[trb_idx].trb_flags & XHCI_TRB_TYPE_MASK) == XHCI_TRB_TYPE_NORMAL) { frame_idx--; if (trb_idx == 0) trb0_idx = xp->ring.ntrb - 2; else trb0_idx = trb_idx - 1; if (xfer->frlengths[frame_idx] == 0) { xfer->frlengths[frame_idx] = XHCI_TRB_LEN(xp->ring.trbs[trb0_idx].trb_status); } } xfer->frlengths[frame_idx] += XHCI_TRB_LEN(xp->ring.trbs[trb_idx].trb_status) - remain; xfer->actlen += xfer->frlengths[frame_idx]; if (xx->index != trb_idx) return (1); xfer->status = USBD_NORMAL_COMPLETION; return (0); } void xhci_event_command(struct xhci_softc *sc, uint64_t paddr) { struct xhci_trb *trb; struct xhci_pipe *xp; uint32_t flags; uint8_t dci, slot; int trb_idx, status; trb_idx = (paddr - sc->sc_cmd_ring.dma.paddr) / sizeof(*trb); if (trb_idx < 0 || trb_idx >= sc->sc_cmd_ring.ntrb) { printf("%s: wrong trb index (%u) max is %zu\n", DEVNAME(sc), trb_idx, sc->sc_cmd_ring.ntrb - 1); return; } trb = &sc->sc_cmd_ring.trbs[trb_idx]; bus_dmamap_sync(sc->sc_cmd_ring.dma.tag, sc->sc_cmd_ring.dma.map, TRBOFF(&sc->sc_cmd_ring, trb), sizeof(struct xhci_trb), BUS_DMASYNC_POSTREAD | BUS_DMASYNC_POSTWRITE); flags = letoh32(trb->trb_flags); slot = XHCI_TRB_GET_SLOT(flags); dci = XHCI_TRB_GET_EP(flags); switch (flags & XHCI_TRB_TYPE_MASK) { case XHCI_CMD_RESET_EP: xp = sc->sc_sdevs[slot].pipes[dci - 1]; if (xp == NULL) break; /* Update the dequeue pointer past the last TRB. */ xhci_cmd_set_tr_deq_async(sc, xp->slot, xp->dci, DEQPTR(xp->ring) | xp->ring.toggle); break; case XHCI_CMD_SET_TR_DEQ: xp = sc->sc_sdevs[slot].pipes[dci - 1]; if (xp == NULL) break; status = xp->halted; xp->halted = 0; if (xp->aborted_xfer != NULL) { xp->aborted_xfer->status = status; xhci_xfer_done(xp->aborted_xfer); wakeup(xp); } break; case XHCI_CMD_CONFIG_EP: case XHCI_CMD_STOP_EP: case XHCI_CMD_DISABLE_SLOT: case XHCI_CMD_ENABLE_SLOT: case XHCI_CMD_ADDRESS_DEVICE: case XHCI_CMD_EVAL_CTX: case XHCI_CMD_NOOP: /* All these commands are synchronous. */ KASSERT(sc->sc_cmd_trb == trb); sc->sc_cmd_trb = NULL; wakeup(&sc->sc_cmd_trb); break; default: DPRINTF(("%s: unexpected command %x\n", DEVNAME(sc), flags)); } } void xhci_event_port_change(struct xhci_softc *sc, uint64_t paddr, uint32_t status) { struct usbd_xfer *xfer = sc->sc_intrxfer; uint32_t port = XHCI_TRB_PORTID(paddr); uint8_t *p; if (XHCI_TRB_GET_CODE(status) != XHCI_CODE_SUCCESS) { DPRINTF(("%s: failed port status event\n", DEVNAME(sc))); return; } if (xfer == NULL) return; p = KERNADDR(&xfer->dmabuf, 0); memset(p, 0, xfer->length); p[port/8] |= 1 << (port%8); DPRINTF(("%s: port=%d change=0x%02x\n", DEVNAME(sc), port, *p)); xfer->actlen = xfer->length; xfer->status = USBD_NORMAL_COMPLETION; usb_transfer_complete(xfer); } void xhci_xfer_done(struct usbd_xfer *xfer) { struct xhci_pipe *xp = (struct xhci_pipe *)xfer->pipe; struct xhci_xfer *xx = (struct xhci_xfer *)xfer; int ntrb, i; splsoftassert(IPL_SOFTUSB); #ifdef XHCI_DEBUG if (xx->index < 0 || xp->pending_xfers[xx->index] == NULL) { printf("%s: xfer=%p done (idx=%d, ntrb=%zd)\n", __func__, xfer, xx->index, xx->ntrb); } #endif if (xp->aborted_xfer == xfer) xp->aborted_xfer = NULL; for (ntrb = 0, i = xx->index; ntrb < xx->ntrb; ntrb++, i--) { xp->pending_xfers[i] = NULL; if (i == 0) i = (xp->ring.ntrb - 1); } xp->free_trbs += xx->ntrb; xx->index = -1; xx->ntrb = 0; timeout_del(&xfer->timeout_handle); usb_rem_task(xfer->device, &xfer->abort_task); usb_transfer_complete(xfer); } /* * Calculate the Device Context Index (DCI) for endpoints as stated * in section 4.5.1 of xHCI specification r1.1. */ static inline uint8_t xhci_ed2dci(usb_endpoint_descriptor_t *ed) { uint8_t dir; if (UE_GET_XFERTYPE(ed->bmAttributes) == UE_CONTROL) return (UE_GET_ADDR(ed->bEndpointAddress) * 2 + 1); if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_IN) dir = 1; else dir = 0; return (UE_GET_ADDR(ed->bEndpointAddress) * 2 + dir); } usbd_status xhci_pipe_open(struct usbd_pipe *pipe) { struct xhci_softc *sc = (struct xhci_softc *)pipe->device->bus; struct xhci_pipe *xp = (struct xhci_pipe *)pipe; usb_endpoint_descriptor_t *ed = pipe->endpoint->edesc; uint8_t slot = 0, xfertype = UE_GET_XFERTYPE(ed->bmAttributes); int error; KASSERT(xp->slot == 0); if (sc->sc_bus.dying) return (USBD_IOERROR); /* Root Hub */ if (pipe->device->depth == 0) { switch (ed->bEndpointAddress) { case USB_CONTROL_ENDPOINT: pipe->methods = &xhci_root_ctrl_methods; break; case UE_DIR_IN | XHCI_INTR_ENDPT: pipe->methods = &xhci_root_intr_methods; break; default: pipe->methods = NULL; return (USBD_INVAL); } return (USBD_NORMAL_COMPLETION); } #if 0 /* Issue a noop to check if the command ring is correctly configured. */ xhci_cmd_noop(sc); #endif switch (xfertype) { case UE_CONTROL: pipe->methods = &xhci_device_ctrl_methods; /* * Get a slot and init the device's contexts. * * Since the control enpoint, represented as the default * pipe, is always opened first we are dealing with a * new device. Put a new slot in the ENABLED state. * */ error = xhci_cmd_slot_control(sc, &slot, 1); if (error || slot == 0 || slot > sc->sc_noslot) return (USBD_INVAL); if (xhci_softdev_alloc(sc, slot)) { xhci_cmd_slot_control(sc, &slot, 0); return (USBD_NOMEM); } break; case UE_ISOCHRONOUS: pipe->methods = &xhci_device_isoc_methods; break; case UE_BULK: pipe->methods = &xhci_device_bulk_methods; break; case UE_INTERRUPT: pipe->methods = &xhci_device_intr_methods; break; default: return (USBD_INVAL); } /* * Our USBD Bus Interface is pipe-oriented but for most of the * operations we need to access a device context, so keep track * of the slot ID in every pipe. */ if (slot == 0) slot = ((struct xhci_pipe *)pipe->device->default_pipe)->slot; xp->slot = slot; xp->dci = xhci_ed2dci(ed); if (xhci_pipe_init(sc, pipe)) { xhci_cmd_slot_control(sc, &slot, 0); return (USBD_IOERROR); } return (USBD_NORMAL_COMPLETION); } /* * Set the maximum Endpoint Service Interface Time (ESIT) payload and * the average TRB buffer length for an endpoint. */ static inline uint32_t xhci_get_txinfo(struct xhci_softc *sc, struct usbd_pipe *pipe) { usb_endpoint_descriptor_t *ed = pipe->endpoint->edesc; uint32_t mep, atl, mps = UGETW(ed->wMaxPacketSize); switch (ed->bmAttributes & UE_XFERTYPE) { case UE_CONTROL: mep = 0; atl = 8; break; case UE_INTERRUPT: case UE_ISOCHRONOUS: if (pipe->device->speed == USB_SPEED_SUPER) { /* XXX Read the companion descriptor */ } mep = (UE_GET_TRANS(mps) + 1) * UE_GET_SIZE(mps); atl = mep; break; case UE_BULK: default: mep = 0; atl = 0; } return (XHCI_EPCTX_MAX_ESIT_PAYLOAD(mep) | XHCI_EPCTX_AVG_TRB_LEN(atl)); } static inline uint32_t xhci_linear_interval(usb_endpoint_descriptor_t *ed) { uint32_t ival = min(max(1, ed->bInterval), 255); return (fls(ival) - 1); } static inline uint32_t xhci_exponential_interval(usb_endpoint_descriptor_t *ed) { uint32_t ival = min(max(1, ed->bInterval), 16); return (ival - 1); } /* * Return interval for endpoint expressed in 2^(ival) * 125us. * * See section 6.2.3.6 of xHCI r1.1 Specification for more details. */ uint32_t xhci_pipe_interval(struct usbd_pipe *pipe) { usb_endpoint_descriptor_t *ed = pipe->endpoint->edesc; uint8_t speed = pipe->device->speed; uint8_t xfertype = UE_GET_XFERTYPE(ed->bmAttributes); uint32_t ival; if (xfertype == UE_CONTROL || xfertype == UE_BULK) { /* Control and Bulk endpoints never NAKs. */ ival = 0; } else { switch (speed) { case USB_SPEED_FULL: if (xfertype == UE_ISOCHRONOUS) { /* Convert 1-2^(15)ms into 3-18 */ ival = xhci_exponential_interval(ed) + 3; break; } /* FALLTHROUGH */ case USB_SPEED_LOW: /* Convert 1-255ms into 3-10 */ ival = xhci_linear_interval(ed) + 3; break; case USB_SPEED_HIGH: case USB_SPEED_SUPER: default: /* Convert 1-2^(15) * 125us into 0-15 */ ival = xhci_exponential_interval(ed); break; } } KASSERT(ival <= 15); return (XHCI_EPCTX_SET_IVAL(ival)); } uint32_t xhci_pipe_maxburst(struct usbd_pipe *pipe) { usb_endpoint_descriptor_t *ed = pipe->endpoint->edesc; uint32_t mps = UGETW(ed->wMaxPacketSize); uint8_t xfertype = UE_GET_XFERTYPE(ed->bmAttributes); uint32_t maxb = 0; switch (pipe->device->speed) { case USB_SPEED_HIGH: if (xfertype == UE_ISOCHRONOUS || xfertype == UE_INTERRUPT) maxb = UE_GET_TRANS(mps); break; case USB_SPEED_SUPER: /* XXX Read the companion descriptor */ default: break; } return (maxb); } int xhci_context_setup(struct xhci_softc *sc, struct usbd_pipe *pipe) { struct xhci_pipe *xp = (struct xhci_pipe *)pipe; struct xhci_soft_dev *sdev = &sc->sc_sdevs[xp->slot]; usb_endpoint_descriptor_t *ed = pipe->endpoint->edesc; uint32_t mps = UGETW(ed->wMaxPacketSize); uint8_t xfertype = UE_GET_XFERTYPE(ed->bmAttributes); uint8_t speed, cerr = 0; uint32_t route = 0, rhport = 0; struct usbd_device *hub; /* * Calculate the Route String. Assume that there is no hub with * more than 15 ports and that they all have a detph < 6. See * section 8.9 of USB 3.1 Specification for more details. */ for (hub = pipe->device; hub->myhub->depth; hub = hub->myhub) { uint32_t port = hub->powersrc->portno; uint32_t depth = hub->myhub->depth; route |= port << (4 * (depth - 1)); } /* Get Root Hub port */ rhport = hub->powersrc->portno; switch (pipe->device->speed) { case USB_SPEED_LOW: speed = XHCI_SPEED_LOW; break; case USB_SPEED_FULL: speed = XHCI_SPEED_FULL; break; case USB_SPEED_HIGH: speed = XHCI_SPEED_HIGH; break; case USB_SPEED_SUPER: speed = XHCI_SPEED_SUPER; break; default: return (USBD_INVAL); } /* Setup the endpoint context */ if (xfertype != UE_ISOCHRONOUS) cerr = 3; if ((ed->bEndpointAddress & UE_DIR_IN) || (xfertype == UE_CONTROL)) xfertype |= 0x4; sdev->ep_ctx[xp->dci-1]->info_lo = htole32(xhci_pipe_interval(pipe)); sdev->ep_ctx[xp->dci-1]->info_hi = htole32( XHCI_EPCTX_SET_MPS(UE_GET_SIZE(mps)) | XHCI_EPCTX_SET_MAXB(xhci_pipe_maxburst(pipe)) | XHCI_EPCTX_SET_EPTYPE(xfertype) | XHCI_EPCTX_SET_CERR(cerr) ); sdev->ep_ctx[xp->dci-1]->txinfo = htole32(xhci_get_txinfo(sc, pipe)); sdev->ep_ctx[xp->dci-1]->deqp = htole64( DEQPTR(xp->ring) | xp->ring.toggle ); /* Unmask the new endoint */ sdev->input_ctx->drop_flags = 0; sdev->input_ctx->add_flags = htole32(XHCI_INCTX_MASK_DCI(xp->dci)); /* Setup the slot context */ sdev->slot_ctx->info_lo = htole32( XHCI_SCTX_DCI(xp->dci) | XHCI_SCTX_SPEED(speed) | XHCI_SCTX_ROUTE(route) ); sdev->slot_ctx->info_hi = htole32(XHCI_SCTX_RHPORT(rhport)); sdev->slot_ctx->tt = 0; sdev->slot_ctx->state = 0; /* XXX */ #define UHUB_IS_MTT(dev) (dev->ddesc.bDeviceProtocol == UDPROTO_HSHUBMTT) /* * If we are opening the interrupt pipe of a hub, update its * context before putting it in the CONFIGURED state. */ if (pipe->device->hub != NULL) { int nports = pipe->device->hub->nports; sdev->slot_ctx->info_lo |= htole32(XHCI_SCTX_HUB(1)); sdev->slot_ctx->info_hi |= htole32(XHCI_SCTX_NPORTS(nports)); if (UHUB_IS_MTT(pipe->device)) sdev->slot_ctx->info_lo |= htole32(XHCI_SCTX_MTT(1)); sdev->slot_ctx->tt |= htole32( XHCI_SCTX_TT_THINK_TIME(pipe->device->hub->ttthink) ); } /* * If this is a Low or Full Speed device below an external High * Speed hub, it needs some TT love. */ if (speed < XHCI_SPEED_HIGH && pipe->device->myhsport != NULL) { struct usbd_device *hshub = pipe->device->myhsport->parent; uint8_t slot = ((struct xhci_pipe *)hshub->default_pipe)->slot; if (UHUB_IS_MTT(hshub)) sdev->slot_ctx->info_lo |= htole32(XHCI_SCTX_MTT(1)); sdev->slot_ctx->tt |= htole32( XHCI_SCTX_TT_HUB_SID(slot) | XHCI_SCTX_TT_PORT_NUM(pipe->device->myhsport->portno) ); } #undef UHUB_IS_MTT /* Unmask the slot context */ sdev->input_ctx->add_flags |= htole32(XHCI_INCTX_MASK_DCI(0)); bus_dmamap_sync(sdev->ictx_dma.tag, sdev->ictx_dma.map, 0, sc->sc_pagesize, BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE); return (0); } int xhci_pipe_init(struct xhci_softc *sc, struct usbd_pipe *pipe) { struct xhci_pipe *xp = (struct xhci_pipe *)pipe; struct xhci_soft_dev *sdev = &sc->sc_sdevs[xp->slot]; int error; #ifdef XHCI_DEBUG struct usbd_device *dev = pipe->device; printf("%s: pipe=%p addr=%d depth=%d port=%d speed=%d dev %d dci %u" " (epAddr=0x%x)\n", __func__, pipe, dev->address, dev->depth, dev->powersrc->portno, dev->speed, xp->slot, xp->dci, pipe->endpoint->edesc->bEndpointAddress); #endif if (xhci_ring_alloc(sc, &xp->ring, XHCI_MAX_XFER, XHCI_XFER_RING_ALIGN)) return (ENOMEM); xp->free_trbs = xp->ring.ntrb; xp->halted = 0; sdev->pipes[xp->dci - 1] = xp; error = xhci_context_setup(sc, pipe); if (error) return (error); if (xp->dci == 1) { /* * If we are opening the default pipe, the Slot should * be in the ENABLED state. Issue an "Address Device" * with BSR=1 to put the device in the DEFAULT state. * We cannot jump directly to the ADDRESSED state with * BSR=0 because some Low/Full speed devices won't accept * a SET_ADDRESS command before we've read their device * descriptor. */ error = xhci_cmd_set_address(sc, xp->slot, sdev->ictx_dma.paddr, XHCI_TRB_BSR); } else { error = xhci_cmd_configure_ep(sc, xp->slot, sdev->ictx_dma.paddr); } if (error) { xhci_ring_free(sc, &xp->ring); return (EIO); } return (0); } void xhci_pipe_close(struct usbd_pipe *pipe) { struct xhci_softc *sc = (struct xhci_softc *)pipe->device->bus; struct xhci_pipe *lxp, *xp = (struct xhci_pipe *)pipe; struct xhci_soft_dev *sdev = &sc->sc_sdevs[xp->slot]; int i; /* Root Hub */ if (pipe->device->depth == 0) return; /* Mask the endpoint */ sdev->input_ctx->drop_flags = htole32(XHCI_INCTX_MASK_DCI(xp->dci)); sdev->input_ctx->add_flags = 0; /* Update last valid Endpoint Context */ for (i = 30; i >= 0; i--) { lxp = sdev->pipes[i]; if (lxp != NULL && lxp != xp) break; } sdev->slot_ctx->info_lo = htole32(XHCI_SCTX_DCI(lxp->dci)); /* Clear the Endpoint Context */ memset(sdev->ep_ctx[xp->dci - 1], 0, sizeof(struct xhci_epctx)); bus_dmamap_sync(sdev->ictx_dma.tag, sdev->ictx_dma.map, 0, sc->sc_pagesize, BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE); if (xhci_cmd_configure_ep(sc, xp->slot, sdev->ictx_dma.paddr)) DPRINTF(("%s: error clearing ep (%d)\n", DEVNAME(sc), xp->dci)); xhci_ring_free(sc, &xp->ring); sdev->pipes[xp->dci - 1] = NULL; /* * If we are closing the default pipe, the device is probably * gone, so put its slot in the DISABLED state. */ if (xp->dci == 1) { xhci_cmd_slot_control(sc, &xp->slot, 0); xhci_softdev_free(sc, xp->slot); } } /* * Transition a device from DEFAULT to ADDRESSED Slot state, this hook * is needed for Low/Full speed devices. * * See section 4.5.3 of USB 3.1 Specification for more details. */ int xhci_setaddr(struct usbd_device *dev, int addr) { struct xhci_softc *sc = (struct xhci_softc *)dev->bus; struct xhci_pipe *xp = (struct xhci_pipe *)dev->default_pipe; struct xhci_soft_dev *sdev = &sc->sc_sdevs[xp->slot]; int error; /* Root Hub */ if (dev->depth == 0) return (0); KASSERT(xp->dci == 1); error = xhci_context_setup(sc, dev->default_pipe); if (error) return (error); error = xhci_cmd_set_address(sc, xp->slot, sdev->ictx_dma.paddr, 0); #ifdef XHCI_DEBUG if (error == 0) { struct xhci_sctx *sctx; uint8_t addr; bus_dmamap_sync(sdev->octx_dma.tag, sdev->octx_dma.map, 0, sc->sc_pagesize, BUS_DMASYNC_POSTREAD); /* Get output slot context. */ sctx = (struct xhci_sctx *)sdev->octx_dma.vaddr; addr = XHCI_SCTX_DEV_ADDR(letoh32(sctx->state)); error = (addr == 0); printf("%s: dev %d addr %d\n", DEVNAME(sc), xp->slot, addr); } #endif return (error); } struct usbd_xfer * xhci_allocx(struct usbd_bus *bus) { return (pool_get(xhcixfer, PR_NOWAIT | PR_ZERO)); } void xhci_freex(struct usbd_bus *bus, struct usbd_xfer *xfer) { pool_put(xhcixfer, xfer); } int xhci_scratchpad_alloc(struct xhci_softc *sc, int npage) { uint64_t *pte; int error, i; /* Allocate the required entry for the table. */ error = usbd_dma_contig_alloc(&sc->sc_bus, &sc->sc_spad.table_dma, (void **)&pte, npage * sizeof(uint64_t), XHCI_SPAD_TABLE_ALIGN, sc->sc_pagesize); if (error) return (ENOMEM); /* Allocate pages. XXX does not need to be contiguous. */ error = usbd_dma_contig_alloc(&sc->sc_bus, &sc->sc_spad.pages_dma, NULL, npage * sc->sc_pagesize, sc->sc_pagesize, 0); if (error) { usbd_dma_contig_free(&sc->sc_bus, &sc->sc_spad.table_dma); return (ENOMEM); } for (i = 0; i < npage; i++) { pte[i] = htole64( sc->sc_spad.pages_dma.paddr + (i * sc->sc_pagesize) ); } bus_dmamap_sync(sc->sc_spad.table_dma.tag, sc->sc_spad.table_dma.map, 0, npage * sizeof(uint64_t), BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE); /* Entry 0 points to the table of scratchpad pointers. */ sc->sc_dcbaa.segs[0] = htole64(sc->sc_spad.table_dma.paddr); bus_dmamap_sync(sc->sc_dcbaa.dma.tag, sc->sc_dcbaa.dma.map, 0, sizeof(uint64_t), BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE); sc->sc_spad.npage = npage; return (0); } void xhci_scratchpad_free(struct xhci_softc *sc) { sc->sc_dcbaa.segs[0] = 0; bus_dmamap_sync(sc->sc_dcbaa.dma.tag, sc->sc_dcbaa.dma.map, 0, sizeof(uint64_t), BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE); usbd_dma_contig_free(&sc->sc_bus, &sc->sc_spad.pages_dma); usbd_dma_contig_free(&sc->sc_bus, &sc->sc_spad.table_dma); } int xhci_ring_alloc(struct xhci_softc *sc, struct xhci_ring *ring, size_t ntrb, size_t alignment) { size_t size; int error; size = ntrb * sizeof(struct xhci_trb); error = usbd_dma_contig_alloc(&sc->sc_bus, &ring->dma, (void **)&ring->trbs, size, alignment, XHCI_RING_BOUNDARY); if (error) return (error); ring->ntrb = ntrb; xhci_ring_reset(sc, ring); return (0); } void xhci_ring_free(struct xhci_softc *sc, struct xhci_ring *ring) { usbd_dma_contig_free(&sc->sc_bus, &ring->dma); } void xhci_ring_reset(struct xhci_softc *sc, struct xhci_ring *ring) { size_t size; size = ring->ntrb * sizeof(struct xhci_trb); memset(ring->trbs, 0, size); ring->index = 0; ring->toggle = XHCI_TRB_CYCLE; /* * Since all our rings use only one segment, at least for * the moment, link their tail to their head. */ if (ring != &sc->sc_evt_ring) { struct xhci_trb *trb = &ring->trbs[ring->ntrb - 1]; trb->trb_paddr = htole64(ring->dma.paddr); trb->trb_flags = htole32(XHCI_TRB_TYPE_LINK | XHCI_TRB_LINKSEG | XHCI_TRB_CYCLE); bus_dmamap_sync(ring->dma.tag, ring->dma.map, 0, size, BUS_DMASYNC_PREWRITE); } else bus_dmamap_sync(ring->dma.tag, ring->dma.map, 0, size, BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE); } struct xhci_trb* xhci_ring_consume(struct xhci_softc *sc, struct xhci_ring *ring) { struct xhci_trb *trb = &ring->trbs[ring->index]; KASSERT(ring->index < ring->ntrb); bus_dmamap_sync(ring->dma.tag, ring->dma.map, TRBOFF(ring, trb), sizeof(struct xhci_trb), BUS_DMASYNC_POSTREAD); /* Make sure this TRB can be consumed. */ if (ring->toggle != (letoh32(trb->trb_flags) & XHCI_TRB_CYCLE)) return (NULL); ring->index++; if (ring->index == ring->ntrb) { ring->index = 0; ring->toggle ^= 1; } return (trb); } struct xhci_trb* xhci_ring_produce(struct xhci_softc *sc, struct xhci_ring *ring) { struct xhci_trb *lnk, *trb; KASSERT(ring->index < ring->ntrb); /* Setup the link TRB after the previous TRB is done. */ if (ring->index == 0) { lnk = &ring->trbs[ring->ntrb - 1]; trb = &ring->trbs[ring->ntrb - 2]; bus_dmamap_sync(ring->dma.tag, ring->dma.map, TRBOFF(ring, lnk), sizeof(struct xhci_trb), BUS_DMASYNC_POSTREAD | BUS_DMASYNC_POSTWRITE); lnk->trb_flags &= htole32(~XHCI_TRB_CHAIN); if (letoh32(trb->trb_flags) & XHCI_TRB_CHAIN) lnk->trb_flags |= htole32(XHCI_TRB_CHAIN); bus_dmamap_sync(ring->dma.tag, ring->dma.map, TRBOFF(ring, lnk), sizeof(struct xhci_trb), BUS_DMASYNC_PREWRITE); lnk->trb_flags ^= htole32(XHCI_TRB_CYCLE); bus_dmamap_sync(ring->dma.tag, ring->dma.map, TRBOFF(ring, lnk), sizeof(struct xhci_trb), BUS_DMASYNC_PREWRITE); } trb = &ring->trbs[ring->index++]; bus_dmamap_sync(ring->dma.tag, ring->dma.map, TRBOFF(ring, trb), sizeof(struct xhci_trb), BUS_DMASYNC_POSTREAD | BUS_DMASYNC_POSTWRITE); /* Toggle cycle state of the link TRB and skip it. */ if (ring->index == (ring->ntrb - 1)) { ring->index = 0; ring->toggle ^= 1; } return (trb); } struct xhci_trb * xhci_xfer_get_trb(struct xhci_softc *sc, struct usbd_xfer *xfer, uint8_t *togglep, int last) { struct xhci_pipe *xp = (struct xhci_pipe *)xfer->pipe; struct xhci_xfer *xx = (struct xhci_xfer *)xfer; KASSERT(xp->free_trbs >= 1); /* Associate this TRB to our xfer. */ xp->pending_xfers[xp->ring.index] = xfer; xp->free_trbs--; xx->index = (last) ? xp->ring.index : -2; xx->ntrb += 1; *togglep = xp->ring.toggle; return (xhci_ring_produce(sc, &xp->ring)); } int xhci_command_submit(struct xhci_softc *sc, struct xhci_trb *trb0, int timeout) { struct xhci_trb *trb; int s, error = 0; KASSERT(timeout == 0 || sc->sc_cmd_trb == NULL); trb0->trb_flags |= htole32(sc->sc_cmd_ring.toggle); trb = xhci_ring_produce(sc, &sc->sc_cmd_ring); if (trb == NULL) return (EAGAIN); trb->trb_paddr = trb0->trb_paddr; trb->trb_status = trb0->trb_status; bus_dmamap_sync(sc->sc_cmd_ring.dma.tag, sc->sc_cmd_ring.dma.map, TRBOFF(&sc->sc_cmd_ring, trb), sizeof(struct xhci_trb), BUS_DMASYNC_PREWRITE); trb->trb_flags = trb0->trb_flags; bus_dmamap_sync(sc->sc_cmd_ring.dma.tag, sc->sc_cmd_ring.dma.map, TRBOFF(&sc->sc_cmd_ring, trb), sizeof(struct xhci_trb), BUS_DMASYNC_PREWRITE); if (timeout == 0) { XDWRITE4(sc, XHCI_DOORBELL(0), 0); return (0); } rw_assert_wrlock(&sc->sc_cmd_lock); s = splusb(); sc->sc_cmd_trb = trb; XDWRITE4(sc, XHCI_DOORBELL(0), 0); error = tsleep(&sc->sc_cmd_trb, PZERO, "xhcicmd", (timeout*hz+999)/ 1000 + 1); if (error) { #ifdef XHCI_DEBUG printf("%s: tsleep() = %d\n", __func__, error); printf("cmd = %d ", XHCI_TRB_TYPE(letoh32(trb->trb_flags))); xhci_dump_trb(trb); #endif KASSERT(sc->sc_cmd_trb == trb); sc->sc_cmd_trb = NULL; splx(s); return (error); } splx(s); memcpy(trb0, &sc->sc_result_trb, sizeof(struct xhci_trb)); if (XHCI_TRB_GET_CODE(letoh32(trb0->trb_status)) == XHCI_CODE_SUCCESS) return (0); #ifdef XHCI_DEBUG printf("%s: event error code=%d, result=%d \n", DEVNAME(sc), XHCI_TRB_GET_CODE(letoh32(trb0->trb_status)), XHCI_TRB_TYPE(letoh32(trb0->trb_flags))); xhci_dump_trb(trb0); #endif return (EIO); } int xhci_command_abort(struct xhci_softc *sc) { uint32_t reg; int i; reg = XOREAD4(sc, XHCI_CRCR_LO); if ((reg & XHCI_CRCR_LO_CRR) == 0) return (0); XOWRITE4(sc, XHCI_CRCR_LO, reg | XHCI_CRCR_LO_CA); XOWRITE4(sc, XHCI_CRCR_HI, 0); for (i = 0; i < 250; i++) { usb_delay_ms(&sc->sc_bus, 1); reg = XOREAD4(sc, XHCI_CRCR_LO) & XHCI_CRCR_LO_CRR; if (!reg) break; } if (reg) { printf("%s: command ring abort timeout\n", DEVNAME(sc)); return (1); } return (0); } int xhci_cmd_configure_ep(struct xhci_softc *sc, uint8_t slot, uint64_t addr) { struct xhci_trb trb; int error; DPRINTF(("%s: %s dev %u\n", DEVNAME(sc), __func__, slot)); trb.trb_paddr = htole64(addr); trb.trb_status = 0; trb.trb_flags = htole32( XHCI_TRB_SET_SLOT(slot) | XHCI_CMD_CONFIG_EP ); rw_enter_write(&sc->sc_cmd_lock); error = xhci_command_submit(sc, &trb, XHCI_CMD_TIMEOUT); rw_exit_write(&sc->sc_cmd_lock); return (error); } int xhci_cmd_stop_ep(struct xhci_softc *sc, uint8_t slot, uint8_t dci) { struct xhci_trb trb; int error; DPRINTF(("%s: %s dev %u dci %u\n", DEVNAME(sc), __func__, slot, dci)); trb.trb_paddr = 0; trb.trb_status = 0; trb.trb_flags = htole32( XHCI_TRB_SET_SLOT(slot) | XHCI_TRB_SET_EP(dci) | XHCI_CMD_STOP_EP ); rw_enter_write(&sc->sc_cmd_lock); error = xhci_command_submit(sc, &trb, XHCI_CMD_TIMEOUT); rw_exit_write(&sc->sc_cmd_lock); return (error); } void xhci_cmd_reset_ep_async(struct xhci_softc *sc, uint8_t slot, uint8_t dci) { struct xhci_trb trb; DPRINTF(("%s: %s dev %u dci %u\n", DEVNAME(sc), __func__, slot, dci)); trb.trb_paddr = 0; trb.trb_status = 0; trb.trb_flags = htole32( XHCI_TRB_SET_SLOT(slot) | XHCI_TRB_SET_EP(dci) | XHCI_CMD_RESET_EP ); xhci_command_submit(sc, &trb, 0); } void xhci_cmd_set_tr_deq_async(struct xhci_softc *sc, uint8_t slot, uint8_t dci, uint64_t addr) { struct xhci_trb trb; DPRINTF(("%s: %s dev %u dci %u\n", DEVNAME(sc), __func__, slot, dci)); trb.trb_paddr = htole64(addr); trb.trb_status = 0; trb.trb_flags = htole32( XHCI_TRB_SET_SLOT(slot) | XHCI_TRB_SET_EP(dci) | XHCI_CMD_SET_TR_DEQ ); xhci_command_submit(sc, &trb, 0); } int xhci_cmd_slot_control(struct xhci_softc *sc, uint8_t *slotp, int enable) { struct xhci_trb trb; int error; DPRINTF(("%s: %s\n", DEVNAME(sc), __func__)); trb.trb_paddr = 0; trb.trb_status = 0; if (enable) trb.trb_flags = htole32(XHCI_CMD_ENABLE_SLOT); else trb.trb_flags = htole32( XHCI_TRB_SET_SLOT(*slotp) | XHCI_CMD_DISABLE_SLOT ); rw_enter_write(&sc->sc_cmd_lock); error = xhci_command_submit(sc, &trb, XHCI_CMD_TIMEOUT); rw_exit_write(&sc->sc_cmd_lock); if (error != 0) return (EIO); if (enable) *slotp = XHCI_TRB_GET_SLOT(letoh32(trb.trb_flags)); return (0); } int xhci_cmd_set_address(struct xhci_softc *sc, uint8_t slot, uint64_t addr, uint32_t bsr) { struct xhci_trb trb; int error; DPRINTF(("%s: %s BSR=%u\n", DEVNAME(sc), __func__, bsr ? 1 : 0)); trb.trb_paddr = htole64(addr); trb.trb_status = 0; trb.trb_flags = htole32( XHCI_TRB_SET_SLOT(slot) | XHCI_CMD_ADDRESS_DEVICE | bsr ); rw_enter_write(&sc->sc_cmd_lock); error = xhci_command_submit(sc, &trb, XHCI_CMD_TIMEOUT); rw_exit_write(&sc->sc_cmd_lock); return (error); } int xhci_cmd_evaluate_ctx(struct xhci_softc *sc, uint8_t slot, uint64_t addr) { struct xhci_trb trb; int error; DPRINTF(("%s: %s dev %u\n", DEVNAME(sc), __func__, slot)); trb.trb_paddr = htole64(addr); trb.trb_status = 0; trb.trb_flags = htole32( XHCI_TRB_SET_SLOT(slot) | XHCI_CMD_EVAL_CTX ); rw_enter_write(&sc->sc_cmd_lock); error = xhci_command_submit(sc, &trb, XHCI_CMD_TIMEOUT); rw_exit_write(&sc->sc_cmd_lock); return (error); } #ifdef XHCI_DEBUG int xhci_cmd_noop(struct xhci_softc *sc) { struct xhci_trb trb; int error; DPRINTF(("%s: %s\n", DEVNAME(sc), __func__)); trb.trb_paddr = 0; trb.trb_status = 0; trb.trb_flags = htole32(XHCI_CMD_NOOP); rw_enter_write(&sc->sc_cmd_lock); error = xhci_command_submit(sc, &trb, XHCI_CMD_TIMEOUT); rw_exit_write(&sc->sc_cmd_lock); return (error); } #endif int xhci_softdev_alloc(struct xhci_softc *sc, uint8_t slot) { struct xhci_soft_dev *sdev = &sc->sc_sdevs[slot]; int i, error; uint8_t *kva; /* * Setup input context. Even with 64 byte context size, it * fits into the smallest supported page size, so use that. */ error = usbd_dma_contig_alloc(&sc->sc_bus, &sdev->ictx_dma, (void **)&kva, sc->sc_pagesize, XHCI_ICTX_ALIGN, sc->sc_pagesize); if (error) return (ENOMEM); sdev->input_ctx = (struct xhci_inctx *)kva; sdev->slot_ctx = (struct xhci_sctx *)(kva + sc->sc_ctxsize); for (i = 0; i < 31; i++) sdev->ep_ctx[i] = (struct xhci_epctx *)(kva + (i + 2) * sc->sc_ctxsize); DPRINTF(("%s: dev %d, input=%p slot=%p ep0=%p\n", DEVNAME(sc), slot, sdev->input_ctx, sdev->slot_ctx, sdev->ep_ctx[0])); /* Setup output context */ error = usbd_dma_contig_alloc(&sc->sc_bus, &sdev->octx_dma, NULL, sc->sc_pagesize, XHCI_OCTX_ALIGN, sc->sc_pagesize); if (error) { usbd_dma_contig_free(&sc->sc_bus, &sdev->ictx_dma); return (ENOMEM); } memset(&sdev->pipes, 0, sizeof(sdev->pipes)); DPRINTF(("%s: dev %d, setting DCBAA to 0x%016llx\n", DEVNAME(sc), slot, (long long)sdev->octx_dma.paddr)); sc->sc_dcbaa.segs[slot] = htole64(sdev->octx_dma.paddr); bus_dmamap_sync(sc->sc_dcbaa.dma.tag, sc->sc_dcbaa.dma.map, slot * sizeof(uint64_t), sizeof(uint64_t), BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE); return (0); } void xhci_softdev_free(struct xhci_softc *sc, uint8_t slot) { struct xhci_soft_dev *sdev = &sc->sc_sdevs[slot]; sc->sc_dcbaa.segs[slot] = 0; bus_dmamap_sync(sc->sc_dcbaa.dma.tag, sc->sc_dcbaa.dma.map, slot * sizeof(uint64_t), sizeof(uint64_t), BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE); usbd_dma_contig_free(&sc->sc_bus, &sdev->octx_dma); usbd_dma_contig_free(&sc->sc_bus, &sdev->ictx_dma); memset(sdev, 0, sizeof(struct xhci_soft_dev)); } /* Root hub descriptors. */ usb_device_descriptor_t xhci_devd = { USB_DEVICE_DESCRIPTOR_SIZE, UDESC_DEVICE, /* type */ {0x00, 0x03}, /* USB version */ UDCLASS_HUB, /* class */ UDSUBCLASS_HUB, /* subclass */ UDPROTO_HSHUBSTT, /* protocol */ 9, /* max packet */ {0},{0},{0x00,0x01}, /* device id */ 1,2,0, /* string indexes */ 1 /* # of configurations */ }; const usb_config_descriptor_t xhci_confd = { USB_CONFIG_DESCRIPTOR_SIZE, UDESC_CONFIG, {USB_CONFIG_DESCRIPTOR_SIZE + USB_INTERFACE_DESCRIPTOR_SIZE + USB_ENDPOINT_DESCRIPTOR_SIZE}, 1, 1, 0, UC_BUS_POWERED | UC_SELF_POWERED, 0 /* max power */ }; const usb_interface_descriptor_t xhci_ifcd = { USB_INTERFACE_DESCRIPTOR_SIZE, UDESC_INTERFACE, 0, 0, 1, UICLASS_HUB, UISUBCLASS_HUB, UIPROTO_HSHUBSTT, 0 }; const usb_endpoint_descriptor_t xhci_endpd = { USB_ENDPOINT_DESCRIPTOR_SIZE, UDESC_ENDPOINT, UE_DIR_IN | XHCI_INTR_ENDPT, UE_INTERRUPT, {2, 0}, /* max 15 ports */ 255 }; const usb_endpoint_ss_comp_descriptor_t xhci_endpcd = { USB_ENDPOINT_SS_COMP_DESCRIPTOR_SIZE, UDESC_ENDPOINT_SS_COMP, 0, 0, {0, 0} }; const usb_hub_descriptor_t xhci_hubd = { USB_HUB_DESCRIPTOR_SIZE, UDESC_SS_HUB, 0, {0,0}, 0, 0, {0}, }; void xhci_abort_xfer(struct usbd_xfer *xfer, usbd_status status) { struct xhci_softc *sc = (struct xhci_softc *)xfer->device->bus; struct xhci_pipe *xp = (struct xhci_pipe *)xfer->pipe; int error; splsoftassert(IPL_SOFTUSB); DPRINTF(("%s: xfer=%p status=%s err=%s actlen=%d len=%d idx=%d\n", __func__, xfer, usbd_errstr(xfer->status), usbd_errstr(status), xfer->actlen, xfer->length, ((struct xhci_xfer *)xfer)->index)); /* XXX The stack should not call abort() in this case. */ if (sc->sc_bus.dying || xfer->status == USBD_NOT_STARTED) { xfer->status = status; timeout_del(&xfer->timeout_handle); usb_rem_task(xfer->device, &xfer->abort_task); usb_transfer_complete(xfer); return; } /* Transfer is already done. */ if (xfer->status != USBD_IN_PROGRESS) { DPRINTF(("%s: already done \n", __func__)); return; } /* Prevent any timeout to kick in. */ timeout_del(&xfer->timeout_handle); usb_rem_task(xfer->device, &xfer->abort_task); /* Indicate that we are aborting this transfer. */ xp->halted = status; xp->aborted_xfer = xfer; /* Stop the endpoint and wait until the hardware says so. */ if (xhci_cmd_stop_ep(sc, xp->slot, xp->dci)) { DPRINTF(("%s: error stopping endpoint\n", DEVNAME(sc))); /* Assume the device is gone. */ xfer->status = status; usb_transfer_complete(xfer); return; } /* * The transfer was already completed when we stopped the * endpoint, no need to move the dequeue pointer past its * TRBs. */ if (xp->aborted_xfer == NULL) { DPRINTF(("%s: done before stopping the endpoint\n", __func__)); xp->halted = 0; return; } /* * At this stage the endpoint has been stopped, so update its * dequeue pointer past the last TRB of the transfer. * * Note: This assumes that only one transfer per endpoint has * pending TRBs on the ring. */ xhci_cmd_set_tr_deq_async(sc, xp->slot, xp->dci, DEQPTR(xp->ring) | xp->ring.toggle); error = tsleep(xp, PZERO, "xhciab", (XHCI_CMD_TIMEOUT*hz+999)/1000 + 1); if (error) printf("%s: timeout aborting transfer\n", DEVNAME(sc)); } void xhci_timeout(void *addr) { struct usbd_xfer *xfer = addr; struct xhci_softc *sc = (struct xhci_softc *)xfer->device->bus; if (sc->sc_bus.dying) { xhci_timeout_task(addr); return; } usb_init_task(&xfer->abort_task, xhci_timeout_task, addr, USB_TASK_TYPE_ABORT); usb_add_task(xfer->device, &xfer->abort_task); } void xhci_timeout_task(void *addr) { struct usbd_xfer *xfer = addr; int s; s = splusb(); xhci_abort_xfer(xfer, USBD_TIMEOUT); splx(s); } usbd_status xhci_root_ctrl_transfer(struct usbd_xfer *xfer) { usbd_status err; err = usb_insert_transfer(xfer); if (err) return (err); return (xhci_root_ctrl_start(SIMPLEQ_FIRST(&xfer->pipe->queue))); } usbd_status xhci_root_ctrl_start(struct usbd_xfer *xfer) { struct xhci_softc *sc = (struct xhci_softc *)xfer->device->bus; usb_port_status_t ps; usb_device_request_t *req; void *buf = NULL; usb_hub_descriptor_t hubd; usbd_status err; int s, len, value, index; int l, totlen = 0; int port, i; uint32_t v; KASSERT(xfer->rqflags & URQ_REQUEST); if (sc->sc_bus.dying) return (USBD_IOERROR); req = &xfer->request; DPRINTFN(4,("%s: type=0x%02x request=%02x\n", __func__, req->bmRequestType, req->bRequest)); len = UGETW(req->wLength); value = UGETW(req->wValue); index = UGETW(req->wIndex); if (len != 0) buf = KERNADDR(&xfer->dmabuf, 0); #define C(x,y) ((x) | ((y) << 8)) switch(C(req->bRequest, req->bmRequestType)) { case C(UR_CLEAR_FEATURE, UT_WRITE_DEVICE): case C(UR_CLEAR_FEATURE, UT_WRITE_INTERFACE): case C(UR_CLEAR_FEATURE, UT_WRITE_ENDPOINT): /* * DEVICE_REMOTE_WAKEUP and ENDPOINT_HALT are no-ops * for the integrated root hub. */ break; case C(UR_GET_CONFIG, UT_READ_DEVICE): if (len > 0) { *(uint8_t *)buf = sc->sc_conf; totlen = 1; } break; case C(UR_GET_DESCRIPTOR, UT_READ_DEVICE): DPRINTFN(8,("xhci_root_ctrl_start: wValue=0x%04x\n", value)); switch(value >> 8) { case UDESC_DEVICE: if ((value & 0xff) != 0) { err = USBD_IOERROR; goto ret; } totlen = l = min(len, USB_DEVICE_DESCRIPTOR_SIZE); USETW(xhci_devd.idVendor, sc->sc_id_vendor); memcpy(buf, &xhci_devd, l); break; /* * We can't really operate at another speed, but the spec says * we need this descriptor. */ case UDESC_OTHER_SPEED_CONFIGURATION: case UDESC_CONFIG: if ((value & 0xff) != 0) { err = USBD_IOERROR; goto ret; } totlen = l = min(len, USB_CONFIG_DESCRIPTOR_SIZE); memcpy(buf, &xhci_confd, l); ((usb_config_descriptor_t *)buf)->bDescriptorType = value >> 8; buf = (char *)buf + l; len -= l; l = min(len, USB_INTERFACE_DESCRIPTOR_SIZE); totlen += l; memcpy(buf, &xhci_ifcd, l); buf = (char *)buf + l; len -= l; l = min(len, USB_ENDPOINT_DESCRIPTOR_SIZE); totlen += l; memcpy(buf, &xhci_endpd, l); break; case UDESC_STRING: if (len == 0) break; *(u_int8_t *)buf = 0; totlen = 1; switch (value & 0xff) { case 0: /* Language table */ totlen = usbd_str(buf, len, "\001"); break; case 1: /* Vendor */ totlen = usbd_str(buf, len, sc->sc_vendor); break; case 2: /* Product */ totlen = usbd_str(buf, len, "xHCI root hub"); break; } break; default: err = USBD_IOERROR; goto ret; } break; case C(UR_GET_INTERFACE, UT_READ_INTERFACE): if (len > 0) { *(uint8_t *)buf = 0; totlen = 1; } break; case C(UR_GET_STATUS, UT_READ_DEVICE): if (len > 1) { USETW(((usb_status_t *)buf)->wStatus,UDS_SELF_POWERED); totlen = 2; } break; case C(UR_GET_STATUS, UT_READ_INTERFACE): case C(UR_GET_STATUS, UT_READ_ENDPOINT): if (len > 1) { USETW(((usb_status_t *)buf)->wStatus, 0); totlen = 2; } break; case C(UR_SET_ADDRESS, UT_WRITE_DEVICE): if (value >= USB_MAX_DEVICES) { err = USBD_IOERROR; goto ret; } break; case C(UR_SET_CONFIG, UT_WRITE_DEVICE): if (value != 0 && value != 1) { err = USBD_IOERROR; goto ret; } sc->sc_conf = value; break; case C(UR_SET_DESCRIPTOR, UT_WRITE_DEVICE): break; case C(UR_SET_FEATURE, UT_WRITE_DEVICE): case C(UR_SET_FEATURE, UT_WRITE_INTERFACE): case C(UR_SET_FEATURE, UT_WRITE_ENDPOINT): err = USBD_IOERROR; goto ret; case C(UR_SET_INTERFACE, UT_WRITE_INTERFACE): break; case C(UR_SYNCH_FRAME, UT_WRITE_ENDPOINT): break; /* Hub requests */ case C(UR_CLEAR_FEATURE, UT_WRITE_CLASS_DEVICE): break; case C(UR_CLEAR_FEATURE, UT_WRITE_CLASS_OTHER): DPRINTFN(8, ("xhci_root_ctrl_start: UR_CLEAR_PORT_FEATURE " "port=%d feature=%d\n", index, value)); if (index < 1 || index > sc->sc_noport) { err = USBD_IOERROR; goto ret; } port = XHCI_PORTSC(index); v = XOREAD4(sc, port) & ~XHCI_PS_CLEAR; switch (value) { case UHF_PORT_ENABLE: XOWRITE4(sc, port, v | XHCI_PS_PED); break; case UHF_PORT_SUSPEND: /* TODO */ break; case UHF_PORT_POWER: XOWRITE4(sc, port, v & ~XHCI_PS_PP); break; case UHF_PORT_INDICATOR: XOWRITE4(sc, port, v & ~XHCI_PS_SET_PIC(3)); break; case UHF_C_PORT_CONNECTION: XOWRITE4(sc, port, v | XHCI_PS_CSC); break; case UHF_C_PORT_ENABLE: XOWRITE4(sc, port, v | XHCI_PS_PEC); break; case UHF_C_PORT_SUSPEND: case UHF_C_PORT_LINK_STATE: XOWRITE4(sc, port, v | XHCI_PS_PLC); break; case UHF_C_PORT_OVER_CURRENT: XOWRITE4(sc, port, v | XHCI_PS_OCC); break; case UHF_C_PORT_RESET: XOWRITE4(sc, port, v | XHCI_PS_PRC); break; case UHF_C_BH_PORT_RESET: XOWRITE4(sc, port, v | XHCI_PS_WRC); break; default: err = USBD_IOERROR; goto ret; } break; case C(UR_GET_DESCRIPTOR, UT_READ_CLASS_DEVICE): if (len == 0) break; if ((value & 0xff) != 0) { err = USBD_IOERROR; goto ret; } v = XREAD4(sc, XHCI_HCCPARAMS); hubd = xhci_hubd; hubd.bNbrPorts = sc->sc_noport; USETW(hubd.wHubCharacteristics, (XHCI_HCC_PPC(v) ? UHD_PWR_INDIVIDUAL : UHD_PWR_GANGED) | (XHCI_HCC_PIND(v) ? UHD_PORT_IND : 0)); hubd.bPwrOn2PwrGood = 10; /* xHCI section 5.4.9 */ for (i = 1; i <= sc->sc_noport; i++) { v = XOREAD4(sc, XHCI_PORTSC(i)); if (v & XHCI_PS_DR) hubd.DeviceRemovable[i / 8] |= 1U << (i % 8); } hubd.bDescLength = USB_HUB_DESCRIPTOR_SIZE + i; l = min(len, hubd.bDescLength); totlen = l; memcpy(buf, &hubd, l); break; case C(UR_GET_STATUS, UT_READ_CLASS_DEVICE): if (len != 16) { err = USBD_IOERROR; goto ret; } memset(buf, 0, len); totlen = len; break; case C(UR_GET_STATUS, UT_READ_CLASS_OTHER): DPRINTFN(8,("xhci_root_ctrl_start: get port status i=%d\n", index)); if (index < 1 || index > sc->sc_noport) { err = USBD_IOERROR; goto ret; } if (len != 4) { err = USBD_IOERROR; goto ret; } v = XOREAD4(sc, XHCI_PORTSC(index)); DPRINTFN(8,("xhci_root_ctrl_start: port status=0x%04x\n", v)); i = UPS_PORT_LS_SET(XHCI_PS_GET_PLS(v)); switch (XHCI_PS_SPEED(v)) { case XHCI_SPEED_FULL: i |= UPS_FULL_SPEED; break; case XHCI_SPEED_LOW: i |= UPS_LOW_SPEED; break; case XHCI_SPEED_HIGH: i |= UPS_HIGH_SPEED; break; case XHCI_SPEED_SUPER: default: break; } if (v & XHCI_PS_CCS) i |= UPS_CURRENT_CONNECT_STATUS; if (v & XHCI_PS_PED) i |= UPS_PORT_ENABLED; if (v & XHCI_PS_OCA) i |= UPS_OVERCURRENT_INDICATOR; if (v & XHCI_PS_PR) i |= UPS_RESET; if (v & XHCI_PS_PP) { if (XHCI_PS_SPEED(v) >= XHCI_SPEED_FULL && XHCI_PS_SPEED(v) <= XHCI_SPEED_HIGH) i |= UPS_PORT_POWER; else i |= UPS_PORT_POWER_SS; } USETW(ps.wPortStatus, i); i = 0; if (v & XHCI_PS_CSC) i |= UPS_C_CONNECT_STATUS; if (v & XHCI_PS_PEC) i |= UPS_C_PORT_ENABLED; if (v & XHCI_PS_OCC) i |= UPS_C_OVERCURRENT_INDICATOR; if (v & XHCI_PS_PRC) i |= UPS_C_PORT_RESET; if (v & XHCI_PS_WRC) i |= UPS_C_BH_PORT_RESET; if (v & XHCI_PS_PLC) i |= UPS_C_PORT_LINK_STATE; if (v & XHCI_PS_CEC) i |= UPS_C_PORT_CONFIG_ERROR; USETW(ps.wPortChange, i); l = min(len, sizeof ps); memcpy(buf, &ps, l); totlen = l; break; case C(UR_SET_DESCRIPTOR, UT_WRITE_CLASS_DEVICE): err = USBD_IOERROR; goto ret; case C(UR_SET_FEATURE, UT_WRITE_CLASS_DEVICE): break; case C(UR_SET_FEATURE, UT_WRITE_CLASS_OTHER): i = index >> 8; index &= 0x00ff; if (index < 1 || index > sc->sc_noport) { err = USBD_IOERROR; goto ret; } port = XHCI_PORTSC(index); v = XOREAD4(sc, port) & ~XHCI_PS_CLEAR; switch (value) { case UHF_PORT_ENABLE: XOWRITE4(sc, port, v | XHCI_PS_PED); break; case UHF_PORT_SUSPEND: DPRINTFN(6, ("suspend port %u (LPM=%u)\n", index, i)); if (XHCI_PS_SPEED(v) == XHCI_SPEED_SUPER) { err = USBD_IOERROR; goto ret; } XOWRITE4(sc, port, v | XHCI_PS_SET_PLS(i ? 2 /* LPM */ : 3) | XHCI_PS_LWS); break; case UHF_PORT_RESET: DPRINTFN(6, ("reset port %d\n", index)); XOWRITE4(sc, port, v | XHCI_PS_PR); break; case UHF_PORT_POWER: DPRINTFN(3, ("set port power %d\n", index)); XOWRITE4(sc, port, v | XHCI_PS_PP); break; case UHF_PORT_INDICATOR: DPRINTFN(3, ("set port indicator %d\n", index)); v &= ~XHCI_PS_SET_PIC(3); v |= XHCI_PS_SET_PIC(1); XOWRITE4(sc, port, v); break; case UHF_C_PORT_RESET: XOWRITE4(sc, port, v | XHCI_PS_PRC); break; case UHF_C_BH_PORT_RESET: XOWRITE4(sc, port, v | XHCI_PS_WRC); break; default: err = USBD_IOERROR; goto ret; } break; case C(UR_CLEAR_TT_BUFFER, UT_WRITE_CLASS_OTHER): case C(UR_RESET_TT, UT_WRITE_CLASS_OTHER): case C(UR_GET_TT_STATE, UT_READ_CLASS_OTHER): case C(UR_STOP_TT, UT_WRITE_CLASS_OTHER): break; default: err = USBD_IOERROR; goto ret; } xfer->actlen = totlen; err = USBD_NORMAL_COMPLETION; ret: xfer->status = err; s = splusb(); usb_transfer_complete(xfer); splx(s); return (err); } void xhci_noop(struct usbd_xfer *xfer) { } usbd_status xhci_root_intr_transfer(struct usbd_xfer *xfer) { usbd_status err; err = usb_insert_transfer(xfer); if (err) return (err); return (xhci_root_intr_start(SIMPLEQ_FIRST(&xfer->pipe->queue))); } usbd_status xhci_root_intr_start(struct usbd_xfer *xfer) { struct xhci_softc *sc = (struct xhci_softc *)xfer->device->bus; if (sc->sc_bus.dying) return (USBD_IOERROR); sc->sc_intrxfer = xfer; return (USBD_IN_PROGRESS); } void xhci_root_intr_abort(struct usbd_xfer *xfer) { struct xhci_softc *sc = (struct xhci_softc *)xfer->device->bus; int s; sc->sc_intrxfer = NULL; xfer->status = USBD_CANCELLED; s = splusb(); usb_transfer_complete(xfer); splx(s); } void xhci_root_intr_done(struct usbd_xfer *xfer) { } /* * Number of packets remaining in the TD after the corresponding TRB. * * Section 4.11.2.4 of xHCI specification r1.1. */ static inline uint32_t xhci_xfer_tdsize(struct usbd_xfer *xfer, uint32_t remain, uint32_t len) { uint32_t npkt, mps = UGETW(xfer->pipe->endpoint->edesc->wMaxPacketSize); if (len == 0) return XHCI_TRB_TDREM(0); npkt = howmany(remain - len, UE_GET_SIZE(mps)); if (npkt > 31) npkt = 31; return XHCI_TRB_TDREM(npkt); } /* * Transfer Burst Count (TBC) and Transfer Last Burst Packet Count (TLBPC). * * Section 4.11.2.3 of xHCI specification r1.1. */ static inline uint32_t xhci_xfer_tbc(struct usbd_xfer *xfer, uint32_t len, uint32_t *tlbpc) { uint32_t mps = UGETW(xfer->pipe->endpoint->edesc->wMaxPacketSize); uint32_t maxb, tdpc, residue, tbc; /* Transfer Descriptor Packet Count, section 4.14.1. */ tdpc = howmany(len, UE_GET_SIZE(mps)); if (tdpc == 0) tdpc = 1; /* Transfer Burst Count */ maxb = xhci_pipe_maxburst(xfer->pipe); tbc = howmany(tdpc, maxb + 1) - 1; /* Transfer Last Burst Packet Count */ if (xfer->device->speed == USB_SPEED_SUPER) { residue = tdpc % (maxb + 1); if (residue == 0) *tlbpc = maxb; else *tlbpc = residue - 1; } else { *tlbpc = tdpc - 1; } return (tbc); } usbd_status xhci_device_ctrl_transfer(struct usbd_xfer *xfer) { usbd_status err; err = usb_insert_transfer(xfer); if (err) return (err); return (xhci_device_ctrl_start(SIMPLEQ_FIRST(&xfer->pipe->queue))); } usbd_status xhci_device_ctrl_start(struct usbd_xfer *xfer) { struct xhci_softc *sc = (struct xhci_softc *)xfer->device->bus; struct xhci_pipe *xp = (struct xhci_pipe *)xfer->pipe; struct xhci_trb *trb0, *trb; uint32_t flags, len = UGETW(xfer->request.wLength); uint8_t toggle; int s; KASSERT(xfer->rqflags & URQ_REQUEST); if (sc->sc_bus.dying || xp->halted) return (USBD_IOERROR); if (xp->free_trbs < 3) return (USBD_NOMEM); /* We'll toggle the setup TRB once we're finished with the stages. */ trb0 = xhci_xfer_get_trb(sc, xfer, &toggle, 0); flags = XHCI_TRB_TYPE_SETUP | XHCI_TRB_IDT | (toggle ^ 1); if (len != 0) { if (usbd_xfer_isread(xfer)) flags |= XHCI_TRB_TRT_IN; else flags |= XHCI_TRB_TRT_OUT; } memcpy(&trb0->trb_paddr, &xfer->request, sizeof(trb0->trb_paddr)); trb0->trb_status = htole32(XHCI_TRB_INTR(0) | XHCI_TRB_LEN(8)); trb0->trb_flags = htole32(flags); bus_dmamap_sync(xp->ring.dma.tag, xp->ring.dma.map, TRBOFF(&xp->ring, trb0), sizeof(struct xhci_trb), BUS_DMASYNC_PREWRITE); /* Data TRB */ if (len != 0) { trb = xhci_xfer_get_trb(sc, xfer, &toggle, 0); flags = XHCI_TRB_TYPE_DATA | toggle; if (usbd_xfer_isread(xfer)) flags |= XHCI_TRB_DIR_IN | XHCI_TRB_ISP; trb->trb_paddr = htole64(DMAADDR(&xfer->dmabuf, 0)); trb->trb_status = htole32( XHCI_TRB_INTR(0) | XHCI_TRB_LEN(len) | xhci_xfer_tdsize(xfer, len, len) ); trb->trb_flags = htole32(flags); bus_dmamap_sync(xp->ring.dma.tag, xp->ring.dma.map, TRBOFF(&xp->ring, trb), sizeof(struct xhci_trb), BUS_DMASYNC_PREWRITE); } /* Status TRB */ trb = xhci_xfer_get_trb(sc, xfer, &toggle, 1); flags = XHCI_TRB_TYPE_STATUS | XHCI_TRB_IOC | toggle; if (len == 0 || !usbd_xfer_isread(xfer)) flags |= XHCI_TRB_DIR_IN; trb->trb_paddr = 0; trb->trb_status = htole32(XHCI_TRB_INTR(0)); trb->trb_flags = htole32(flags); bus_dmamap_sync(xp->ring.dma.tag, xp->ring.dma.map, TRBOFF(&xp->ring, trb), sizeof(struct xhci_trb), BUS_DMASYNC_PREWRITE); /* Setup TRB */ trb0->trb_flags ^= htole32(XHCI_TRB_CYCLE); bus_dmamap_sync(xp->ring.dma.tag, xp->ring.dma.map, TRBOFF(&xp->ring, trb0), sizeof(struct xhci_trb), BUS_DMASYNC_PREWRITE); s = splusb(); XDWRITE4(sc, XHCI_DOORBELL(xp->slot), xp->dci); xfer->status = USBD_IN_PROGRESS; if (xfer->timeout && !sc->sc_bus.use_polling) { timeout_del(&xfer->timeout_handle); timeout_set(&xfer->timeout_handle, xhci_timeout, xfer); timeout_add_msec(&xfer->timeout_handle, xfer->timeout); } splx(s); return (USBD_IN_PROGRESS); } void xhci_device_ctrl_abort(struct usbd_xfer *xfer) { xhci_abort_xfer(xfer, USBD_CANCELLED); } usbd_status xhci_device_generic_transfer(struct usbd_xfer *xfer) { usbd_status err; err = usb_insert_transfer(xfer); if (err) return (err); return (xhci_device_generic_start(SIMPLEQ_FIRST(&xfer->pipe->queue))); } usbd_status xhci_device_generic_start(struct usbd_xfer *xfer) { struct xhci_softc *sc = (struct xhci_softc *)xfer->device->bus; struct xhci_pipe *xp = (struct xhci_pipe *)xfer->pipe; struct xhci_trb *trb0, *trb; uint32_t len, remain, flags; uint32_t mps = UGETW(xfer->pipe->endpoint->edesc->wMaxPacketSize); uint64_t paddr = DMAADDR(&xfer->dmabuf, 0); uint8_t toggle; int s, i, ntrb; KASSERT(!(xfer->rqflags & URQ_REQUEST)); if (sc->sc_bus.dying || xp->halted) return (USBD_IOERROR); /* How many TRBs do we need for this transfer? */ ntrb = howmany(xfer->length, XHCI_TRB_MAXSIZE); /* If the buffer crosses a 64k boundary, we need one more. */ len = XHCI_TRB_MAXSIZE - (paddr & (XHCI_TRB_MAXSIZE - 1)); if (len < xfer->length) ntrb++; else len = xfer->length; /* If we need to append a zero length packet, we need one more. */ if ((xfer->flags & USBD_FORCE_SHORT_XFER || xfer->length == 0) && (xfer->length % UE_GET_SIZE(mps) == 0)) ntrb++; if (xp->free_trbs < ntrb) return (USBD_NOMEM); /* We'll toggle the first TRB once we're finished with the chain. */ trb0 = xhci_xfer_get_trb(sc, xfer, &toggle, (ntrb == 1)); flags = XHCI_TRB_TYPE_NORMAL | (toggle ^ 1); if (usbd_xfer_isread(xfer)) flags |= XHCI_TRB_ISP; flags |= (ntrb == 1) ? XHCI_TRB_IOC : XHCI_TRB_CHAIN; trb0->trb_paddr = htole64(DMAADDR(&xfer->dmabuf, 0)); trb0->trb_status = htole32( XHCI_TRB_INTR(0) | XHCI_TRB_LEN(len) | xhci_xfer_tdsize(xfer, xfer->length, len) ); trb0->trb_flags = htole32(flags); bus_dmamap_sync(xp->ring.dma.tag, xp->ring.dma.map, TRBOFF(&xp->ring, trb0), sizeof(struct xhci_trb), BUS_DMASYNC_PREWRITE); remain = xfer->length - len; paddr += len; /* Chain more TRBs if needed. */ for (i = ntrb - 1; i > 0; i--) { len = min(remain, XHCI_TRB_MAXSIZE); /* Next (or Last) TRB. */ trb = xhci_xfer_get_trb(sc, xfer, &toggle, (i == 1)); flags = XHCI_TRB_TYPE_NORMAL | toggle; if (usbd_xfer_isread(xfer)) flags |= XHCI_TRB_ISP; flags |= (i == 1) ? XHCI_TRB_IOC : XHCI_TRB_CHAIN; trb->trb_paddr = htole64(paddr); trb->trb_status = htole32( XHCI_TRB_INTR(0) | XHCI_TRB_LEN(len) | xhci_xfer_tdsize(xfer, remain, len) ); trb->trb_flags = htole32(flags); bus_dmamap_sync(xp->ring.dma.tag, xp->ring.dma.map, TRBOFF(&xp->ring, trb), sizeof(struct xhci_trb), BUS_DMASYNC_PREWRITE); remain -= len; paddr += len; } /* First TRB. */ trb0->trb_flags ^= htole32(XHCI_TRB_CYCLE); bus_dmamap_sync(xp->ring.dma.tag, xp->ring.dma.map, TRBOFF(&xp->ring, trb0), sizeof(struct xhci_trb), BUS_DMASYNC_PREWRITE); s = splusb(); XDWRITE4(sc, XHCI_DOORBELL(xp->slot), xp->dci); xfer->status = USBD_IN_PROGRESS; if (xfer->timeout && !sc->sc_bus.use_polling) { timeout_del(&xfer->timeout_handle); timeout_set(&xfer->timeout_handle, xhci_timeout, xfer); timeout_add_msec(&xfer->timeout_handle, xfer->timeout); } splx(s); return (USBD_IN_PROGRESS); } void xhci_device_generic_done(struct usbd_xfer *xfer) { /* Only happens with interrupt transfers. */ if (xfer->pipe->repeat) { xfer->actlen = 0; xhci_device_generic_start(xfer); } } void xhci_device_generic_abort(struct usbd_xfer *xfer) { KASSERT(!xfer->pipe->repeat || xfer->pipe->intrxfer == xfer); xhci_abort_xfer(xfer, USBD_CANCELLED); } usbd_status xhci_device_isoc_transfer(struct usbd_xfer *xfer) { usbd_status err; err = usb_insert_transfer(xfer); if (err && err != USBD_IN_PROGRESS) return (err); return (xhci_device_isoc_start(xfer)); } usbd_status xhci_device_isoc_start(struct usbd_xfer *xfer) { struct xhci_softc *sc = (struct xhci_softc *)xfer->device->bus; struct xhci_pipe *xp = (struct xhci_pipe *)xfer->pipe; struct xhci_xfer *xx = (struct xhci_xfer *)xfer; struct xhci_trb *trb0, *trb; uint32_t len, remain, flags; uint64_t paddr; uint32_t tbc, tlbpc; int s, i, j, ntrb = xfer->nframes; uint8_t toggle; KASSERT(!(xfer->rqflags & URQ_REQUEST)); if (sc->sc_bus.dying || xp->halted) return (USBD_IOERROR); /* Why would you do that anyway? */ if (sc->sc_bus.use_polling) return (USBD_INVAL); /* * To allow continuous transfers, above we start all transfers * immediately. However, we're still going to get usbd_start_next call * this when another xfer completes. So, check if this is already * in progress or not */ if (xx->ntrb > 0) return (USBD_IN_PROGRESS); paddr = DMAADDR(&xfer->dmabuf, 0); /* How many TRBs do for all Transfers? */ for (i = 0, ntrb = 0; i < xfer->nframes; i++) { /* How many TRBs do we need for this transfer? */ ntrb += howmany(xfer->frlengths[i], XHCI_TRB_MAXSIZE); /* If the buffer crosses a 64k boundary, we need one more. */ len = XHCI_TRB_MAXSIZE - (paddr & (XHCI_TRB_MAXSIZE - 1)); if (len < xfer->frlengths[i]) ntrb++; paddr += xfer->frlengths[i]; } if (xp->free_trbs < ntrb) return (USBD_NOMEM); paddr = DMAADDR(&xfer->dmabuf, 0); for (i = 0, trb0 = NULL; i < xfer->nframes; i++) { /* How many TRBs do we need for this transfer? */ ntrb = howmany(xfer->frlengths[i], XHCI_TRB_MAXSIZE); /* If the buffer crosses a 64k boundary, we need one more. */ len = XHCI_TRB_MAXSIZE - (paddr & (XHCI_TRB_MAXSIZE - 1)); if (len < xfer->frlengths[i]) ntrb++; else len = xfer->frlengths[i]; KASSERT(ntrb < 3); /* * We'll commit the first TRB once we're finished with the * chain. */ trb = xhci_xfer_get_trb(sc, xfer, &toggle, (ntrb == 1)); DPRINTF(("%s:%d: ring %p trb0_idx %lu ntrb %d paddr %llx " "len %u\n", __func__, __LINE__, &xp->ring.trbs[0], (trb - &xp->ring.trbs[0]), ntrb, paddr, len)); /* Record the first TRB so we can toggle later. */ if (trb0 == NULL) { trb0 = trb; toggle ^= 1; } flags = XHCI_TRB_TYPE_ISOCH | XHCI_TRB_SIA | toggle; if (usbd_xfer_isread(xfer)) flags |= XHCI_TRB_ISP; flags |= (ntrb == 1) ? XHCI_TRB_IOC : XHCI_TRB_CHAIN; tbc = xhci_xfer_tbc(xfer, xfer->frlengths[i], &tlbpc); flags |= XHCI_TRB_ISOC_TBC(tbc) | XHCI_TRB_ISOC_TLBPC(tlbpc); trb->trb_paddr = htole64(paddr); trb->trb_status = htole32( XHCI_TRB_INTR(0) | XHCI_TRB_LEN(len) | xhci_xfer_tdsize(xfer, xfer->frlengths[i], len) ); trb->trb_flags = htole32(flags); bus_dmamap_sync(xp->ring.dma.tag, xp->ring.dma.map, TRBOFF(&xp->ring, trb), sizeof(struct xhci_trb), BUS_DMASYNC_PREWRITE); remain = xfer->frlengths[i] - len; paddr += len; /* Chain more TRBs if needed. */ for (j = ntrb - 1; j > 0; j--) { len = min(remain, XHCI_TRB_MAXSIZE); /* Next (or Last) TRB. */ trb = xhci_xfer_get_trb(sc, xfer, &toggle, (j == 1)); flags = XHCI_TRB_TYPE_NORMAL | toggle; if (usbd_xfer_isread(xfer)) flags |= XHCI_TRB_ISP; flags |= (j == 1) ? XHCI_TRB_IOC : XHCI_TRB_CHAIN; DPRINTF(("%s:%d: ring %p trb0_idx %lu ntrb %d " "paddr %llx len %u\n", __func__, __LINE__, &xp->ring.trbs[0], (trb - &xp->ring.trbs[0]), ntrb, paddr, len)); trb->trb_paddr = htole64(paddr); trb->trb_status = htole32( XHCI_TRB_INTR(0) | XHCI_TRB_LEN(len) | xhci_xfer_tdsize(xfer, remain, len) ); trb->trb_flags = htole32(flags); bus_dmamap_sync(xp->ring.dma.tag, xp->ring.dma.map, TRBOFF(&xp->ring, trb), sizeof(struct xhci_trb), BUS_DMASYNC_PREWRITE); remain -= len; paddr += len; } xfer->frlengths[i] = 0; } /* First TRB. */ trb0->trb_flags ^= htole32(XHCI_TRB_CYCLE); bus_dmamap_sync(xp->ring.dma.tag, xp->ring.dma.map, TRBOFF(&xp->ring, trb0), sizeof(struct xhci_trb), BUS_DMASYNC_PREWRITE); s = splusb(); XDWRITE4(sc, XHCI_DOORBELL(xp->slot), xp->dci); xfer->status = USBD_IN_PROGRESS; if (xfer->timeout) { timeout_del(&xfer->timeout_handle); timeout_set(&xfer->timeout_handle, xhci_timeout, xfer); timeout_add_msec(&xfer->timeout_handle, xfer->timeout); } splx(s); return (USBD_IN_PROGRESS); }