/* $OpenBSD: kern_clock.c,v 1.97 2018/10/17 12:25:38 bluhm Exp $ */ /* $NetBSD: kern_clock.c,v 1.34 1996/06/09 04:51:03 briggs Exp $ */ /*- * Copyright (c) 1982, 1986, 1991, 1993 * The Regents of the University of California. All rights reserved. * (c) UNIX System Laboratories, Inc. * All or some portions of this file are derived from material licensed * to the University of California by American Telephone and Telegraph * Co. or Unix System Laboratories, Inc. and are reproduced herein with * the permission of UNIX System Laboratories, Inc. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * @(#)kern_clock.c 8.5 (Berkeley) 1/21/94 */ #include #include #include #include #include #include #include #include #include #include #include #include #if defined(GPROF) || defined(DDBPROF) #include #endif /* * Clock handling routines. * * This code is written to operate with two timers that run independently of * each other. The main clock, running hz times per second, is used to keep * track of real time. The second timer handles kernel and user profiling, * and does resource use estimation. If the second timer is programmable, * it is randomized to avoid aliasing between the two clocks. For example, * the randomization prevents an adversary from always giving up the cpu * just before its quantum expires. Otherwise, it would never accumulate * cpu ticks. The mean frequency of the second timer is stathz. * * If no second timer exists, stathz will be zero; in this case we drive * profiling and statistics off the main clock. This WILL NOT be accurate; * do not do it unless absolutely necessary. * * The statistics clock may (or may not) be run at a higher rate while * profiling. This profile clock runs at profhz. We require that profhz * be an integral multiple of stathz. * * If the statistics clock is running fast, it must be divided by the ratio * profhz/stathz for statistics. (For profiling, every tick counts.) */ int stathz; int schedhz; int profhz; int profprocs; int ticks; static int psdiv, pscnt; /* prof => stat divider */ int psratio; /* ratio: prof / stat */ void *softclock_si; volatile unsigned long jiffies; /* XXX Linux API for drm(4) */ /* * Initialize clock frequencies and start both clocks running. */ void initclocks(void) { int i; softclock_si = softintr_establish(IPL_SOFTCLOCK, softclock, NULL); if (softclock_si == NULL) panic("initclocks: unable to register softclock intr"); ticks = INT_MAX - (15 * 60 * hz); jiffies = ULONG_MAX - (10 * 60 * hz); /* * Set divisors to 1 (normal case) and let the machine-specific * code do its bit. */ psdiv = pscnt = 1; cpu_initclocks(); /* * Compute profhz/stathz, and fix profhz if needed. */ i = stathz ? stathz : hz; if (profhz == 0) profhz = i; psratio = profhz / i; /* For very large HZ, ensure that division by 0 does not occur later */ if (tickadj == 0) tickadj = 1; inittimecounter(); } /* * hardclock does the accounting needed for ITIMER_PROF and ITIMER_VIRTUAL. * We don't want to send signals with psignal from hardclock because it makes * MULTIPROCESSOR locking very complicated. Instead, to use an idea from * FreeBSD, we set a flag on the thread and when it goes to return to * userspace it signals itself. */ /* * The real-time timer, interrupting hz times per second. */ void hardclock(struct clockframe *frame) { struct proc *p; struct cpu_info *ci = curcpu(); p = curproc; if (p && ((p->p_flag & (P_SYSTEM | P_WEXIT)) == 0)) { struct process *pr = p->p_p; /* * Run current process's virtual and profile time, as needed. */ if (CLKF_USERMODE(frame) && timerisset(&pr->ps_timer[ITIMER_VIRTUAL].it_value) && itimerdecr(&pr->ps_timer[ITIMER_VIRTUAL], tick) == 0) { atomic_setbits_int(&p->p_flag, P_ALRMPEND); need_proftick(p); } if (timerisset(&pr->ps_timer[ITIMER_PROF].it_value) && itimerdecr(&pr->ps_timer[ITIMER_PROF], tick) == 0) { atomic_setbits_int(&p->p_flag, P_PROFPEND); need_proftick(p); } } /* * If no separate statistics clock is available, run it from here. */ if (stathz == 0) statclock(frame); if (--ci->ci_schedstate.spc_rrticks <= 0) roundrobin(ci); /* * If we are not the primary CPU, we're not allowed to do * any more work. */ if (CPU_IS_PRIMARY(ci) == 0) return; tc_ticktock(); ticks++; jiffies++; /* * Update real-time timeout queue. * Process callouts at a very low cpu priority, so we don't keep the * relatively high clock interrupt priority any longer than necessary. */ if (timeout_hardclock_update()) softintr_schedule(softclock_si); } /* * Compute number of hz in the specified amount of time. */ int tvtohz(const struct timeval *tv) { unsigned long nticks; time_t sec; long usec; /* * If the number of usecs in the whole seconds part of the time * fits in a long, then the total number of usecs will * fit in an unsigned long. Compute the total and convert it to * ticks, rounding up and adding 1 to allow for the current tick * to expire. Rounding also depends on unsigned long arithmetic * to avoid overflow. * * Otherwise, if the number of ticks in the whole seconds part of * the time fits in a long, then convert the parts to * ticks separately and add, using similar rounding methods and * overflow avoidance. This method would work in the previous * case but it is slightly slower and assumes that hz is integral. * * Otherwise, round the time down to the maximum * representable value. * * If ints have 32 bits, then the maximum value for any timeout in * 10ms ticks is 248 days. */ sec = tv->tv_sec; usec = tv->tv_usec; if (sec < 0 || (sec == 0 && usec <= 0)) nticks = 0; else if (sec <= LONG_MAX / 1000000) nticks = (sec * 1000000 + (unsigned long)usec + (tick - 1)) / tick + 1; else if (sec <= LONG_MAX / hz) nticks = sec * hz + ((unsigned long)usec + (tick - 1)) / tick + 1; else nticks = LONG_MAX; if (nticks > INT_MAX) nticks = INT_MAX; return ((int)nticks); } int tstohz(const struct timespec *ts) { struct timeval tv; TIMESPEC_TO_TIMEVAL(&tv, ts); /* Round up. */ if ((ts->tv_nsec % 1000) != 0) { tv.tv_usec += 1; if (tv.tv_usec >= 1000000) { tv.tv_usec -= 1000000; tv.tv_sec += 1; } } return (tvtohz(&tv)); } /* * Start profiling on a process. * * Kernel profiling passes proc0 which never exits and hence * keeps the profile clock running constantly. */ void startprofclock(struct process *pr) { int s; if ((pr->ps_flags & PS_PROFIL) == 0) { atomic_setbits_int(&pr->ps_flags, PS_PROFIL); if (++profprocs == 1 && stathz != 0) { s = splstatclock(); psdiv = pscnt = psratio; setstatclockrate(profhz); splx(s); } } } /* * Stop profiling on a process. */ void stopprofclock(struct process *pr) { int s; if (pr->ps_flags & PS_PROFIL) { atomic_clearbits_int(&pr->ps_flags, PS_PROFIL); if (--profprocs == 0 && stathz != 0) { s = splstatclock(); psdiv = pscnt = 1; setstatclockrate(stathz); splx(s); } } } /* * Statistics clock. Grab profile sample, and if divider reaches 0, * do process and kernel statistics. */ void statclock(struct clockframe *frame) { #if defined(GPROF) || defined(DDBPROF) struct gmonparam *g; u_long i; #endif struct cpu_info *ci = curcpu(); struct schedstate_percpu *spc = &ci->ci_schedstate; struct proc *p = curproc; struct process *pr; /* * Notice changes in divisor frequency, and adjust clock * frequency accordingly. */ if (spc->spc_psdiv != psdiv) { spc->spc_psdiv = psdiv; spc->spc_pscnt = psdiv; if (psdiv == 1) { setstatclockrate(stathz); } else { setstatclockrate(profhz); } } if (CLKF_USERMODE(frame)) { pr = p->p_p; if (pr->ps_flags & PS_PROFIL) addupc_intr(p, CLKF_PC(frame)); if (--spc->spc_pscnt > 0) return; /* * Came from user mode; CPU was in user state. * If this process is being profiled record the tick. */ p->p_uticks++; if (pr->ps_nice > NZERO) spc->spc_cp_time[CP_NICE]++; else spc->spc_cp_time[CP_USER]++; } else { #if defined(GPROF) || defined(DDBPROF) /* * Kernel statistics are just like addupc_intr, only easier. */ g = ci->ci_gmon; if (g != NULL && g->state == GMON_PROF_ON) { i = CLKF_PC(frame) - g->lowpc; if (i < g->textsize) { i /= HISTFRACTION * sizeof(*g->kcount); g->kcount[i]++; } } #endif #if defined(PROC_PC) if (p != NULL && p->p_p->ps_flags & PS_PROFIL) addupc_intr(p, PROC_PC(p)); #endif if (--spc->spc_pscnt > 0) return; /* * Came from kernel mode, so we were: * - spinning on a lock * - handling an interrupt, * - doing syscall or trap work on behalf of the current * user process, or * - spinning in the idle loop. * Whichever it is, charge the time as appropriate. * Note that we charge interrupts to the current process, * regardless of whether they are ``for'' that process, * so that we know how much of its real time was spent * in ``non-process'' (i.e., interrupt) work. */ if (CLKF_INTR(frame)) { if (p != NULL) p->p_iticks++; spc->spc_cp_time[spc->spc_spinning ? CP_SPIN : CP_INTR]++; } else if (p != NULL && p != spc->spc_idleproc) { p->p_sticks++; spc->spc_cp_time[spc->spc_spinning ? CP_SPIN : CP_SYS]++; } else spc->spc_cp_time[spc->spc_spinning ? CP_SPIN : CP_IDLE]++; } spc->spc_pscnt = psdiv; if (p != NULL) { p->p_cpticks++; /* * If no schedclock is provided, call it here at ~~12-25 Hz; * ~~16 Hz is best */ if (schedhz == 0) { if ((++curcpu()->ci_schedstate.spc_schedticks & 3) == 0) schedclock(p); } } } /* * Return information about system clocks. */ int sysctl_clockrate(char *where, size_t *sizep, void *newp) { struct clockinfo clkinfo; /* * Construct clockinfo structure. */ memset(&clkinfo, 0, sizeof clkinfo); clkinfo.tick = tick; clkinfo.tickadj = tickadj; clkinfo.hz = hz; clkinfo.profhz = profhz; clkinfo.stathz = stathz ? stathz : hz; return (sysctl_rdstruct(where, sizep, newp, &clkinfo, sizeof(clkinfo))); }