/* $OpenBSD: kern_ntptime.c,v 1.10 2001/07/04 23:00:58 espie Exp $ */ /* $NetBSD: kern_ntptime.c,v 1.2 1996/03/07 14:31:20 christos Exp $ */ /****************************************************************************** * * * Copyright (c) David L. Mills 1993, 1994 * * * * Permission to use, copy, modify, and distribute this software and its * * documentation for any purpose and without fee is hereby granted, provided * * that the above copyright notice appears in all copies and that both the * * copyright notice and this permission notice appear in supporting * * documentation, and that the name University of Delaware not be used in * * advertising or publicity pertaining to distribution of the software * * without specific, written prior permission. The University of Delaware * * makes no representations about the suitability this software for any * * purpose. It is provided "as is" without express or implied warranty. * * * ******************************************************************************/ /* * Modification history kern_ntptime.c * * 24 Sep 94 David L. Mills * Tightened code at exits. * * 24 Mar 94 David L. Mills * Revised syscall interface to include new variables for PPS * time discipline. * * 14 Feb 94 David L. Mills * Added code for external clock * * 28 Nov 93 David L. Mills * Revised frequency scaling to conform with adjusted parameters * * 17 Sep 93 David L. Mills * Created file */ /* * ntp_gettime(), ntp_adjtime() - precision time interface for SunOS * V4.1.1 and V4.1.3 * * These routines consitute the Network Time Protocol (NTP) interfaces * for user and daemon application programs. The ntp_gettime() routine * provides the time, maximum error (synch distance) and estimated error * (dispersion) to client user application programs. The ntp_adjtime() * routine is used by the NTP daemon to adjust the system clock to an * externally derived time. The time offset and related variables set by * this routine are used by hardclock() to adjust the phase and * frequency of the phase-lock loop which controls the system clock. */ #include #include #include #include #include #include #include #include #include #include #include #include #ifdef NTP /* * The following variables are used by the hardclock() routine in the * kern_clock.c module and are described in that module. */ extern volatile struct timeval time; /* kernel time variable */ extern int time_state; /* clock state */ extern int time_status; /* clock status bits */ extern long time_offset; /* time adjustment (us) */ extern long time_freq; /* frequency offset (scaled ppm) */ extern long time_maxerror; /* maximum error (us) */ extern long time_esterror; /* estimated error (us) */ extern long time_constant; /* pll time constant */ extern long time_precision; /* clock precision (us) */ extern long time_tolerance; /* frequency tolerance (scaled ppm) */ #ifdef PPS_SYNC /* * The following variables are used only if the PPS signal discipline * is configured in the kernel. */ extern int pps_shift; /* interval duration (s) (shift) */ extern long pps_freq; /* pps frequency offset (scaled ppm) */ extern long pps_jitter; /* pps jitter (us) */ extern long pps_stabil; /* pps stability (scaled ppm) */ extern long pps_jitcnt; /* jitter limit exceeded */ extern long pps_calcnt; /* calibration intervals */ extern long pps_errcnt; /* calibration errors */ extern long pps_stbcnt; /* stability limit exceeded */ #endif /* PPS_SYNC */ /*ARGSUSED*/ /* * ntp_gettime() - NTP user application interface */ int sys_ntp_gettime(p, v, retval) struct proc *p; void *v; register_t *retval; { struct sys_ntp_gettime_args /* { syscallarg(struct timex *) ntvp; } */ *uap = v; struct timeval atv; struct ntptimeval ntv; int error = 0; int s; if (SCARG(uap, ntvp)) { s = splclock(); #ifdef EXT_CLOCK /* * The microtime() external clock routine returns a * status code. If less than zero, we declare an error * in the clock status word and return the kernel * (software) time variable. While there are other * places that call microtime(), this is the only place * that matters from an application point of view. */ if (microtime(&atv) < 0) { time_status |= STA_CLOCKERR; ntv.time = time; } else time_status &= ~STA_CLOCKERR; #else /* EXT_CLOCK */ microtime(&atv); #endif /* EXT_CLOCK */ ntv.time = atv; ntv.maxerror = time_maxerror; ntv.esterror = time_esterror; splx(s); error = copyout((caddr_t)&ntv, (caddr_t)SCARG(uap, ntvp), sizeof (ntv)); } if (!error) { /* * Status word error decode. If any of these conditions * occur, an error is returned, instead of the status * word. Most applications will care only about the fact * the system clock may not be trusted, not about the * details. * * Hardware or software error */ if ((time_status & (STA_UNSYNC | STA_CLOCKERR)) || /* * PPS signal lost when either time or frequency * synchronization requested */ (time_status & (STA_PPSFREQ | STA_PPSTIME) && !(time_status & STA_PPSSIGNAL)) || /* * PPS jitter exceeded when time synchronization * requested */ (time_status & STA_PPSTIME && time_status & STA_PPSJITTER) || /* * PPS wander exceeded or calibration error when * frequency synchronization requested */ (time_status & STA_PPSFREQ && time_status & (STA_PPSWANDER | STA_PPSERROR))) *retval = TIME_ERROR; else *retval = (register_t)time_state; } return(error); } /* ARGSUSED */ /* * ntp_adjtime() - NTP daemon application interface */ int sys_ntp_adjtime(p, v, retval) struct proc *p; void *v; register_t *retval; { struct sys_ntp_adjtime_args /* { syscallarg(struct timex *) tp; } */ *uap = v; struct timex ntv; int error = 0; int modes; int s; if ((error = copyin((caddr_t)SCARG(uap, tp), (caddr_t)&ntv, sizeof(ntv)))) return (error); /* * Update selected clock variables - only the superuser can * change anything. Note that there is no error checking here on * the assumption the superuser should know what it is doing. */ modes = ntv.modes; if (modes != 0 && (error = suser(p->p_ucred, &p->p_acflag))) return (error); s = splclock(); if (modes & MOD_FREQUENCY) #ifdef PPS_SYNC time_freq = ntv.freq - pps_freq; #else /* PPS_SYNC */ time_freq = ntv.freq; #endif /* PPS_SYNC */ if (modes & MOD_MAXERROR) time_maxerror = ntv.maxerror; if (modes & MOD_ESTERROR) time_esterror = ntv.esterror; if (modes & MOD_STATUS) { time_status &= STA_RONLY; time_status |= ntv.status & ~STA_RONLY; } if (modes & MOD_TIMECONST) time_constant = ntv.constant; if (modes & MOD_OFFSET) hardupdate(ntv.offset); /* * Retrieve all clock variables */ if (time_offset < 0) ntv.offset = -(-time_offset >> SHIFT_UPDATE); else ntv.offset = time_offset >> SHIFT_UPDATE; #ifdef PPS_SYNC ntv.freq = time_freq + pps_freq; #else /* PPS_SYNC */ ntv.freq = time_freq; #endif /* PPS_SYNC */ ntv.maxerror = time_maxerror; ntv.esterror = time_esterror; ntv.status = time_status; ntv.constant = time_constant; ntv.precision = time_precision; ntv.tolerance = time_tolerance; #ifdef PPS_SYNC ntv.shift = pps_shift; ntv.ppsfreq = pps_freq; ntv.jitter = pps_jitter >> PPS_AVG; ntv.stabil = pps_stabil; ntv.calcnt = pps_calcnt; ntv.errcnt = pps_errcnt; ntv.jitcnt = pps_jitcnt; ntv.stbcnt = pps_stbcnt; #endif /* PPS_SYNC */ splx(s); error = copyout((caddr_t)&ntv, (caddr_t)SCARG(uap, tp), sizeof(ntv)); if (!error) { /* * Status word error decode. See comments in * ntp_gettime() routine. */ if ((time_status & (STA_UNSYNC | STA_CLOCKERR)) || (time_status & (STA_PPSFREQ | STA_PPSTIME) && !(time_status & STA_PPSSIGNAL)) || (time_status & STA_PPSTIME && time_status & STA_PPSJITTER) || (time_status & STA_PPSFREQ && time_status & (STA_PPSWANDER | STA_PPSERROR))) *retval = TIME_ERROR; else *retval = (register_t)time_state; } return error; } #endif /* NTP */ /* * return information about kernel precision timekeeping */ int sysctl_ntptime(where, sizep) register char *where; size_t *sizep; { #ifndef NTP return (ENOSYS); #else /* !NTP */ struct timeval atv; struct ntptimeval ntv; int s; /* * Construct ntp_timeval. */ s = splclock(); #ifdef EXT_CLOCK /* * The microtime() external clock routine returns a * status code. If less than zero, we declare an error * in the clock status word and return the kernel * (software) time variable. While there are other * places that call microtime(), this is the only place * that matters from an application point of view. */ if (microtime(&atv) < 0) { time_status |= STA_CLOCKERR; ntv.time = time; } else { time_status &= ~STA_CLOCKERR; } #else /* EXT_CLOCK */ microtime(&atv); #endif /* EXT_CLOCK */ ntv.time = atv; ntv.maxerror = time_maxerror; ntv.esterror = time_esterror; splx(s); #ifdef notyet /* * Status word error decode. If any of these conditions * occur, an error is returned, instead of the status * word. Most applications will care only about the fact * the system clock may not be trusted, not about the * details. * * Hardware or software error */ if ((time_status & (STA_UNSYNC | STA_CLOCKERR)) || ntv.time_state = TIME_ERROR; /* * PPS signal lost when either time or frequency * synchronization requested */ (time_status & (STA_PPSFREQ | STA_PPSTIME) && !(time_status & STA_PPSSIGNAL)) || /* * PPS jitter exceeded when time synchronization * requested */ (time_status & STA_PPSTIME && time_status & STA_PPSJITTER) || /* * PPS wander exceeded or calibration error when * frequency synchronization requested */ (time_status & STA_PPSFREQ && time_status & (STA_PPSWANDER | STA_PPSERROR))) ntv.time_state = TIME_ERROR; else ntv.time_state = time_state; #endif /* notyet */ return (sysctl_rdstruct(where, sizep, NULL, &ntv, sizeof(ntv))); #endif /* NTP */ }