/* $OpenBSD: kern_timeout.c,v 1.67 2019/12/25 00:15:36 cheloha Exp $ */ /* * Copyright (c) 2001 Thomas Nordin * Copyright (c) 2000-2001 Artur Grabowski * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY * AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL * THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ #include #include #include #include #include #include #include /* _Q_INVALIDATE */ #include #include #ifdef DDB #include #include #include #include #endif /* * Locks used to protect global variables in this file: * * I immutable after initialization * t timeout_mutex */ struct mutex timeout_mutex = MUTEX_INITIALIZER(IPL_HIGH); void *softclock_si; /* [I] softclock() interrupt handle */ struct timeoutstat tostat; /* [t] statistics and totals */ /* * Timeouts are kept in a hierarchical timing wheel. The to_time is the value * of the global variable "ticks" when the timeout should be called. There are * four levels with 256 buckets each. */ #define BUCKETS 1024 #define WHEELSIZE 256 #define WHEELMASK 255 #define WHEELBITS 8 struct circq timeout_wheel[BUCKETS]; /* [t] Queues of timeouts */ struct circq timeout_todo; /* [t] Due or needs scheduling */ struct circq timeout_proc; /* [t] Due + needs process context */ #define MASKWHEEL(wheel, time) (((time) >> ((wheel)*WHEELBITS)) & WHEELMASK) #define BUCKET(rel, abs) \ (timeout_wheel[ \ ((rel) <= (1 << (2*WHEELBITS))) \ ? ((rel) <= (1 << WHEELBITS)) \ ? MASKWHEEL(0, (abs)) \ : MASKWHEEL(1, (abs)) + WHEELSIZE \ : ((rel) <= (1 << (3*WHEELBITS))) \ ? MASKWHEEL(2, (abs)) + 2*WHEELSIZE \ : MASKWHEEL(3, (abs)) + 3*WHEELSIZE]) #define MOVEBUCKET(wheel, time) \ CIRCQ_CONCAT(&timeout_todo, \ &timeout_wheel[MASKWHEEL((wheel), (time)) + (wheel)*WHEELSIZE]) /* * Circular queue definitions. */ #define CIRCQ_INIT(elem) do { \ (elem)->next = (elem); \ (elem)->prev = (elem); \ } while (0) #define CIRCQ_INSERT_TAIL(list, elem) do { \ (elem)->prev = (list)->prev; \ (elem)->next = (list); \ (list)->prev->next = (elem); \ (list)->prev = (elem); \ tostat.tos_pending++; \ } while (0) #define CIRCQ_CONCAT(fst, snd) do { \ if (!CIRCQ_EMPTY(snd)) { \ (fst)->prev->next = (snd)->next;\ (snd)->next->prev = (fst)->prev;\ (snd)->prev->next = (fst); \ (fst)->prev = (snd)->prev; \ CIRCQ_INIT(snd); \ } \ } while (0) #define CIRCQ_REMOVE(elem) do { \ (elem)->next->prev = (elem)->prev; \ (elem)->prev->next = (elem)->next; \ _Q_INVALIDATE((elem)->prev); \ _Q_INVALIDATE((elem)->next); \ tostat.tos_pending--; \ } while (0) #define CIRCQ_FIRST(elem) ((elem)->next) #define CIRCQ_EMPTY(elem) (CIRCQ_FIRST(elem) == (elem)) #define CIRCQ_FOREACH(elem, list) \ for ((elem) = CIRCQ_FIRST(list); \ (elem) != (list); \ (elem) = CIRCQ_FIRST(elem)) #ifdef WITNESS struct lock_object timeout_sleeplock_obj = { .lo_name = "timeout", .lo_flags = LO_WITNESS | LO_INITIALIZED | LO_SLEEPABLE | (LO_CLASS_RWLOCK << LO_CLASSSHIFT) }; struct lock_object timeout_spinlock_obj = { .lo_name = "timeout", .lo_flags = LO_WITNESS | LO_INITIALIZED | (LO_CLASS_MUTEX << LO_CLASSSHIFT) }; struct lock_type timeout_sleeplock_type = { .lt_name = "timeout" }; struct lock_type timeout_spinlock_type = { .lt_name = "timeout" }; #define TIMEOUT_LOCK_OBJ(needsproc) \ ((needsproc) ? &timeout_sleeplock_obj : &timeout_spinlock_obj) #endif void softclock(void *); void softclock_create_thread(void *); void softclock_thread(void *); void timeout_proc_barrier(void *); /* * The first thing in a struct timeout is its struct circq, so we * can get back from a pointer to the latter to a pointer to the * whole timeout with just a cast. */ static inline struct timeout * timeout_from_circq(struct circq *p) { return ((struct timeout *)(p)); } static inline void timeout_sync_order(int needsproc) { WITNESS_CHECKORDER(TIMEOUT_LOCK_OBJ(needsproc), LOP_NEWORDER, NULL); } static inline void timeout_sync_enter(int needsproc) { timeout_sync_order(needsproc); WITNESS_LOCK(TIMEOUT_LOCK_OBJ(needsproc), 0); } static inline void timeout_sync_leave(int needsproc) { WITNESS_UNLOCK(TIMEOUT_LOCK_OBJ(needsproc), 0); } /* * Some of the "math" in here is a bit tricky. * * We have to beware of wrapping ints. * We use the fact that any element added to the queue must be added with a * positive time. That means that any element `to' on the queue cannot be * scheduled to timeout further in time than INT_MAX, but to->to_time can * be positive or negative so comparing it with anything is dangerous. * The only way we can use the to->to_time value in any predictable way * is when we calculate how far in the future `to' will timeout - * "to->to_time - ticks". The result will always be positive for future * timeouts and 0 or negative for due timeouts. */ void timeout_startup(void) { int b; CIRCQ_INIT(&timeout_todo); CIRCQ_INIT(&timeout_proc); for (b = 0; b < nitems(timeout_wheel); b++) CIRCQ_INIT(&timeout_wheel[b]); } void timeout_proc_init(void) { softclock_si = softintr_establish(IPL_SOFTCLOCK, softclock, NULL); if (softclock_si == NULL) panic("%s: unable to register softclock interrupt", __func__); WITNESS_INIT(&timeout_sleeplock_obj, &timeout_sleeplock_type); WITNESS_INIT(&timeout_spinlock_obj, &timeout_spinlock_type); kthread_create_deferred(softclock_create_thread, NULL); } void timeout_set(struct timeout *new, void (*fn)(void *), void *arg) { new->to_func = fn; new->to_arg = arg; new->to_flags = TIMEOUT_INITIALIZED; } void timeout_set_proc(struct timeout *new, void (*fn)(void *), void *arg) { timeout_set(new, fn, arg); SET(new->to_flags, TIMEOUT_NEEDPROCCTX); } int timeout_add(struct timeout *new, int to_ticks) { int old_time; int ret = 1; KASSERT(ISSET(new->to_flags, TIMEOUT_INITIALIZED)); KASSERT(to_ticks >= 0); mtx_enter(&timeout_mutex); /* Initialize the time here, it won't change. */ old_time = new->to_time; new->to_time = to_ticks + ticks; CLR(new->to_flags, TIMEOUT_TRIGGERED | TIMEOUT_SCHEDULED); /* * If this timeout already is scheduled and now is moved * earlier, reschedule it now. Otherwise leave it in place * and let it be rescheduled later. */ if (ISSET(new->to_flags, TIMEOUT_ONQUEUE)) { if (new->to_time - ticks < old_time - ticks) { CIRCQ_REMOVE(&new->to_list); CIRCQ_INSERT_TAIL(&timeout_todo, &new->to_list); } tostat.tos_readded++; ret = 0; } else { SET(new->to_flags, TIMEOUT_ONQUEUE); CIRCQ_INSERT_TAIL(&timeout_todo, &new->to_list); } tostat.tos_added++; mtx_leave(&timeout_mutex); return ret; } int timeout_add_tv(struct timeout *to, const struct timeval *tv) { uint64_t to_ticks; to_ticks = (uint64_t)hz * tv->tv_sec + tv->tv_usec / tick; if (to_ticks > INT_MAX) to_ticks = INT_MAX; if (to_ticks == 0 && tv->tv_usec > 0) to_ticks = 1; return timeout_add(to, (int)to_ticks); } int timeout_add_ts(struct timeout *to, const struct timespec *ts) { uint64_t to_ticks; to_ticks = (uint64_t)hz * ts->tv_sec + ts->tv_nsec / (tick * 1000); if (to_ticks > INT_MAX) to_ticks = INT_MAX; if (to_ticks == 0 && ts->tv_nsec > 0) to_ticks = 1; return timeout_add(to, (int)to_ticks); } int timeout_add_bt(struct timeout *to, const struct bintime *bt) { uint64_t to_ticks; to_ticks = (uint64_t)hz * bt->sec + (long)(((uint64_t)1000000 * (uint32_t)(bt->frac >> 32)) >> 32) / tick; if (to_ticks > INT_MAX) to_ticks = INT_MAX; if (to_ticks == 0 && bt->frac > 0) to_ticks = 1; return timeout_add(to, (int)to_ticks); } int timeout_add_sec(struct timeout *to, int secs) { uint64_t to_ticks; to_ticks = (uint64_t)hz * secs; if (to_ticks > INT_MAX) to_ticks = INT_MAX; return timeout_add(to, (int)to_ticks); } int timeout_add_msec(struct timeout *to, int msecs) { uint64_t to_ticks; to_ticks = (uint64_t)msecs * 1000 / tick; if (to_ticks > INT_MAX) to_ticks = INT_MAX; if (to_ticks == 0 && msecs > 0) to_ticks = 1; return timeout_add(to, (int)to_ticks); } int timeout_add_usec(struct timeout *to, int usecs) { int to_ticks = usecs / tick; if (to_ticks == 0 && usecs > 0) to_ticks = 1; return timeout_add(to, to_ticks); } int timeout_add_nsec(struct timeout *to, int nsecs) { int to_ticks = nsecs / (tick * 1000); if (to_ticks == 0 && nsecs > 0) to_ticks = 1; return timeout_add(to, to_ticks); } int timeout_del(struct timeout *to) { int ret = 0; mtx_enter(&timeout_mutex); if (ISSET(to->to_flags, TIMEOUT_ONQUEUE)) { CIRCQ_REMOVE(&to->to_list); CLR(to->to_flags, TIMEOUT_ONQUEUE); tostat.tos_cancelled++; ret = 1; } CLR(to->to_flags, TIMEOUT_TRIGGERED | TIMEOUT_SCHEDULED); tostat.tos_deleted++; mtx_leave(&timeout_mutex); return ret; } int timeout_del_barrier(struct timeout *to) { int removed; timeout_sync_order(ISSET(to->to_flags, TIMEOUT_NEEDPROCCTX)); removed = timeout_del(to); if (!removed) timeout_barrier(to); return removed; } void timeout_barrier(struct timeout *to) { int needsproc = ISSET(to->to_flags, TIMEOUT_NEEDPROCCTX); timeout_sync_order(needsproc); if (!needsproc) { KERNEL_LOCK(); splx(splsoftclock()); KERNEL_UNLOCK(); } else { struct cond c = COND_INITIALIZER(); struct timeout barrier; timeout_set_proc(&barrier, timeout_proc_barrier, &c); mtx_enter(&timeout_mutex); SET(barrier.to_flags, TIMEOUT_ONQUEUE); CIRCQ_INSERT_TAIL(&timeout_proc, &barrier.to_list); mtx_leave(&timeout_mutex); wakeup_one(&timeout_proc); cond_wait(&c, "tmobar"); } } void timeout_proc_barrier(void *arg) { struct cond *c = arg; cond_signal(c); } /* * This is called from hardclock() on the primary CPU at the start of * every tick. */ void timeout_hardclock_update(void) { int need_softclock; mtx_enter(&timeout_mutex); MOVEBUCKET(0, ticks); if (MASKWHEEL(0, ticks) == 0) { MOVEBUCKET(1, ticks); if (MASKWHEEL(1, ticks) == 0) { MOVEBUCKET(2, ticks); if (MASKWHEEL(2, ticks) == 0) MOVEBUCKET(3, ticks); } } need_softclock = !CIRCQ_EMPTY(&timeout_todo); mtx_leave(&timeout_mutex); if (need_softclock) softintr_schedule(softclock_si); } void timeout_run(struct timeout *to) { void (*fn)(void *); void *arg; int needsproc; MUTEX_ASSERT_LOCKED(&timeout_mutex); CLR(to->to_flags, TIMEOUT_ONQUEUE | TIMEOUT_SCHEDULED); SET(to->to_flags, TIMEOUT_TRIGGERED); fn = to->to_func; arg = to->to_arg; needsproc = ISSET(to->to_flags, TIMEOUT_NEEDPROCCTX); mtx_leave(&timeout_mutex); timeout_sync_enter(needsproc); fn(arg); timeout_sync_leave(needsproc); mtx_enter(&timeout_mutex); } /* * Timeouts are processed here instead of timeout_hardclock_update() * to avoid doing any more work at IPL_CLOCK than absolutely necessary. * Down here at IPL_SOFTCLOCK other interrupts can be serviced promptly * so the system remains responsive even if there is a surge of timeouts. */ void softclock(void *arg) { int delta; struct circq *bucket; struct timeout *to; int needsproc = 0; mtx_enter(&timeout_mutex); while (!CIRCQ_EMPTY(&timeout_todo)) { to = timeout_from_circq(CIRCQ_FIRST(&timeout_todo)); CIRCQ_REMOVE(&to->to_list); /* * If due run it or defer execution to the thread, * otherwise insert it into the right bucket. */ delta = to->to_time - ticks; if (delta > 0) { bucket = &BUCKET(delta, to->to_time); CIRCQ_INSERT_TAIL(bucket, &to->to_list); if (ISSET(to->to_flags, TIMEOUT_SCHEDULED)) tostat.tos_rescheduled++; else SET(to->to_flags, TIMEOUT_SCHEDULED); tostat.tos_scheduled++; continue; } if (ISSET(to->to_flags, TIMEOUT_SCHEDULED) && delta < 0) tostat.tos_late++; if (ISSET(to->to_flags, TIMEOUT_NEEDPROCCTX)) { CIRCQ_INSERT_TAIL(&timeout_proc, &to->to_list); needsproc = 1; continue; } timeout_run(to); tostat.tos_run_softclock++; } tostat.tos_softclocks++; mtx_leave(&timeout_mutex); if (needsproc) wakeup(&timeout_proc); } void softclock_create_thread(void *arg) { if (kthread_create(softclock_thread, NULL, NULL, "softclock")) panic("fork softclock"); } void softclock_thread(void *arg) { CPU_INFO_ITERATOR cii; struct cpu_info *ci; struct sleep_state sls; struct timeout *to; KERNEL_ASSERT_LOCKED(); /* Be conservative for the moment */ CPU_INFO_FOREACH(cii, ci) { if (CPU_IS_PRIMARY(ci)) break; } KASSERT(ci != NULL); sched_peg_curproc(ci); for (;;) { sleep_setup(&sls, &timeout_proc, PSWP, "bored"); sleep_finish(&sls, CIRCQ_EMPTY(&timeout_proc)); mtx_enter(&timeout_mutex); while (!CIRCQ_EMPTY(&timeout_proc)) { to = timeout_from_circq(CIRCQ_FIRST(&timeout_proc)); CIRCQ_REMOVE(&to->to_list); timeout_run(to); tostat.tos_run_thread++; } tostat.tos_thread_wakeups++; mtx_leave(&timeout_mutex); } } #ifndef SMALL_KERNEL void timeout_adjust_ticks(int adj) { struct timeout *to; struct circq *p; int new_ticks, b; /* adjusting the monotonic clock backwards would be a Bad Thing */ if (adj <= 0) return; mtx_enter(&timeout_mutex); new_ticks = ticks + adj; for (b = 0; b < nitems(timeout_wheel); b++) { p = CIRCQ_FIRST(&timeout_wheel[b]); while (p != &timeout_wheel[b]) { to = timeout_from_circq(p); p = CIRCQ_FIRST(p); /* when moving a timeout forward need to reinsert it */ if (to->to_time - ticks < adj) to->to_time = new_ticks; CIRCQ_REMOVE(&to->to_list); CIRCQ_INSERT_TAIL(&timeout_todo, &to->to_list); } } ticks = new_ticks; mtx_leave(&timeout_mutex); } #endif int timeout_sysctl(void *oldp, size_t *oldlenp, void *newp, size_t newlen) { struct timeoutstat status; mtx_enter(&timeout_mutex); memcpy(&status, &tostat, sizeof(status)); mtx_leave(&timeout_mutex); return sysctl_rdstruct(oldp, oldlenp, newp, &status, sizeof(status)); } #ifdef DDB void db_show_callout_bucket(struct circq *); void db_show_callout_bucket(struct circq *bucket) { char buf[8]; struct timeout *to; struct circq *p; db_expr_t offset; char *name, *where; int width = sizeof(long) * 2; CIRCQ_FOREACH(p, bucket) { to = timeout_from_circq(p); db_find_sym_and_offset((vaddr_t)to->to_func, &name, &offset); name = name ? name : "?"; if (bucket == &timeout_todo) where = "softint"; else if (bucket == &timeout_proc) where = "thread"; else { snprintf(buf, sizeof(buf), "%3ld/%1ld", (bucket - timeout_wheel) % WHEELSIZE, (bucket - timeout_wheel) / WHEELSIZE); where = buf; } db_printf("%9d %7s 0x%0*lx %s\n", to->to_time - ticks, where, width, (ulong)to->to_arg, name); } } void db_show_callout(db_expr_t addr, int haddr, db_expr_t count, char *modif) { int width = sizeof(long) * 2 + 2; int b; db_printf("ticks now: %d\n", ticks); db_printf("%9s %7s %*s func\n", "ticks", "wheel", width, "arg"); db_show_callout_bucket(&timeout_todo); db_show_callout_bucket(&timeout_proc); for (b = 0; b < nitems(timeout_wheel); b++) db_show_callout_bucket(&timeout_wheel[b]); } #endif