/* $OpenBSD: kern_timeout.c,v 1.83 2021/02/08 08:18:45 mpi Exp $ */ /* * Copyright (c) 2001 Thomas Nordin * Copyright (c) 2000-2001 Artur Grabowski * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY * AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL * THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ #include #include #include #include #include #include #include #include /* _Q_INVALIDATE */ #include #include #ifdef DDB #include #include #include #include #endif #include "kcov.h" #if NKCOV > 0 #include #endif /* * Locks used to protect global variables in this file: * * I immutable after initialization * T timeout_mutex */ struct mutex timeout_mutex = MUTEX_INITIALIZER(IPL_HIGH); void *softclock_si; /* [I] softclock() interrupt handle */ struct timeoutstat tostat; /* [T] statistics and totals */ /* * Timeouts are kept in a hierarchical timing wheel. The to_time is the value * of the global variable "ticks" when the timeout should be called. There are * four levels with 256 buckets each. */ #define WHEELCOUNT 4 #define WHEELSIZE 256 #define WHEELMASK 255 #define WHEELBITS 8 #define BUCKETS (WHEELCOUNT * WHEELSIZE) struct circq timeout_wheel[BUCKETS]; /* [T] Tick-based timeouts */ struct circq timeout_wheel_kc[BUCKETS]; /* [T] Clock-based timeouts */ struct circq timeout_new; /* [T] New, unscheduled timeouts */ struct circq timeout_todo; /* [T] Due or needs rescheduling */ struct circq timeout_proc; /* [T] Due + needs process context */ time_t timeout_level_width[WHEELCOUNT]; /* [I] Wheel level width (seconds) */ struct timespec tick_ts; /* [I] Length of a tick (1/hz secs) */ struct kclock { struct timespec kc_lastscan; /* [T] Clock time at last wheel scan */ struct timespec kc_late; /* [T] Late if due prior */ struct timespec kc_offset; /* [T] Offset from primary kclock */ } timeout_kclock[KCLOCK_MAX]; #define MASKWHEEL(wheel, time) (((time) >> ((wheel)*WHEELBITS)) & WHEELMASK) #define BUCKET(rel, abs) \ (timeout_wheel[ \ ((rel) <= (1 << (2*WHEELBITS))) \ ? ((rel) <= (1 << WHEELBITS)) \ ? MASKWHEEL(0, (abs)) \ : MASKWHEEL(1, (abs)) + WHEELSIZE \ : ((rel) <= (1 << (3*WHEELBITS))) \ ? MASKWHEEL(2, (abs)) + 2*WHEELSIZE \ : MASKWHEEL(3, (abs)) + 3*WHEELSIZE]) #define MOVEBUCKET(wheel, time) \ CIRCQ_CONCAT(&timeout_todo, \ &timeout_wheel[MASKWHEEL((wheel), (time)) + (wheel)*WHEELSIZE]) /* * Circular queue definitions. */ #define CIRCQ_INIT(elem) do { \ (elem)->next = (elem); \ (elem)->prev = (elem); \ } while (0) #define CIRCQ_INSERT_TAIL(list, elem) do { \ (elem)->prev = (list)->prev; \ (elem)->next = (list); \ (list)->prev->next = (elem); \ (list)->prev = (elem); \ tostat.tos_pending++; \ } while (0) #define CIRCQ_CONCAT(fst, snd) do { \ if (!CIRCQ_EMPTY(snd)) { \ (fst)->prev->next = (snd)->next;\ (snd)->next->prev = (fst)->prev;\ (snd)->prev->next = (fst); \ (fst)->prev = (snd)->prev; \ CIRCQ_INIT(snd); \ } \ } while (0) #define CIRCQ_REMOVE(elem) do { \ (elem)->next->prev = (elem)->prev; \ (elem)->prev->next = (elem)->next; \ _Q_INVALIDATE((elem)->prev); \ _Q_INVALIDATE((elem)->next); \ tostat.tos_pending--; \ } while (0) #define CIRCQ_FIRST(elem) ((elem)->next) #define CIRCQ_EMPTY(elem) (CIRCQ_FIRST(elem) == (elem)) #define CIRCQ_FOREACH(elem, list) \ for ((elem) = CIRCQ_FIRST(list); \ (elem) != (list); \ (elem) = CIRCQ_FIRST(elem)) #ifdef WITNESS struct lock_object timeout_sleeplock_obj = { .lo_name = "timeout", .lo_flags = LO_WITNESS | LO_INITIALIZED | LO_SLEEPABLE | (LO_CLASS_RWLOCK << LO_CLASSSHIFT) }; struct lock_object timeout_spinlock_obj = { .lo_name = "timeout", .lo_flags = LO_WITNESS | LO_INITIALIZED | (LO_CLASS_MUTEX << LO_CLASSSHIFT) }; struct lock_type timeout_sleeplock_type = { .lt_name = "timeout" }; struct lock_type timeout_spinlock_type = { .lt_name = "timeout" }; #define TIMEOUT_LOCK_OBJ(needsproc) \ ((needsproc) ? &timeout_sleeplock_obj : &timeout_spinlock_obj) #endif void kclock_nanotime(int, struct timespec *); void softclock(void *); void softclock_create_thread(void *); void softclock_process_kclock_timeout(struct timeout *, int); void softclock_process_tick_timeout(struct timeout *, int); void softclock_thread(void *); uint32_t timeout_bucket(const struct timeout *); uint32_t timeout_maskwheel(uint32_t, const struct timespec *); void timeout_run(struct timeout *); void timeout_proc_barrier(void *); /* * The first thing in a struct timeout is its struct circq, so we * can get back from a pointer to the latter to a pointer to the * whole timeout with just a cast. */ static inline struct timeout * timeout_from_circq(struct circq *p) { return ((struct timeout *)(p)); } static inline void timeout_sync_order(int needsproc) { WITNESS_CHECKORDER(TIMEOUT_LOCK_OBJ(needsproc), LOP_NEWORDER, NULL); } static inline void timeout_sync_enter(int needsproc) { timeout_sync_order(needsproc); WITNESS_LOCK(TIMEOUT_LOCK_OBJ(needsproc), 0); } static inline void timeout_sync_leave(int needsproc) { WITNESS_UNLOCK(TIMEOUT_LOCK_OBJ(needsproc), 0); } /* * Some of the "math" in here is a bit tricky. * * We have to beware of wrapping ints. * We use the fact that any element added to the queue must be added with a * positive time. That means that any element `to' on the queue cannot be * scheduled to timeout further in time than INT_MAX, but to->to_time can * be positive or negative so comparing it with anything is dangerous. * The only way we can use the to->to_time value in any predictable way * is when we calculate how far in the future `to' will timeout - * "to->to_time - ticks". The result will always be positive for future * timeouts and 0 or negative for due timeouts. */ void timeout_startup(void) { int b, level; CIRCQ_INIT(&timeout_new); CIRCQ_INIT(&timeout_todo); CIRCQ_INIT(&timeout_proc); for (b = 0; b < nitems(timeout_wheel); b++) CIRCQ_INIT(&timeout_wheel[b]); for (b = 0; b < nitems(timeout_wheel_kc); b++) CIRCQ_INIT(&timeout_wheel_kc[b]); for (level = 0; level < nitems(timeout_level_width); level++) timeout_level_width[level] = 2 << (level * WHEELBITS); NSEC_TO_TIMESPEC(tick_nsec, &tick_ts); } void timeout_proc_init(void) { softclock_si = softintr_establish(IPL_SOFTCLOCK, softclock, NULL); if (softclock_si == NULL) panic("%s: unable to register softclock interrupt", __func__); WITNESS_INIT(&timeout_sleeplock_obj, &timeout_sleeplock_type); WITNESS_INIT(&timeout_spinlock_obj, &timeout_spinlock_type); kthread_create_deferred(softclock_create_thread, NULL); } static inline void _timeout_set(struct timeout *to, void (*fn)(void *), void *arg, int flags, int kclock) { to->to_func = fn; to->to_arg = arg; to->to_flags = flags | TIMEOUT_INITIALIZED; to->to_kclock = kclock; } void timeout_set(struct timeout *new, void (*fn)(void *), void *arg) { _timeout_set(new, fn, arg, 0, KCLOCK_NONE); } void timeout_set_flags(struct timeout *to, void (*fn)(void *), void *arg, int flags) { _timeout_set(to, fn, arg, flags, KCLOCK_NONE); } void timeout_set_proc(struct timeout *new, void (*fn)(void *), void *arg) { _timeout_set(new, fn, arg, TIMEOUT_PROC, KCLOCK_NONE); } void timeout_set_kclock(struct timeout *to, void (*fn)(void *), void *arg, int flags, int kclock) { _timeout_set(to, fn, arg, flags | TIMEOUT_KCLOCK, kclock); } int timeout_add(struct timeout *new, int to_ticks) { int old_time; int ret = 1; KASSERT(ISSET(new->to_flags, TIMEOUT_INITIALIZED)); KASSERT(!ISSET(new->to_flags, TIMEOUT_KCLOCK)); KASSERT(new->to_kclock == KCLOCK_NONE); KASSERT(to_ticks >= 0); mtx_enter(&timeout_mutex); /* Initialize the time here, it won't change. */ old_time = new->to_time; new->to_time = to_ticks + ticks; CLR(new->to_flags, TIMEOUT_TRIGGERED); /* * If this timeout already is scheduled and now is moved * earlier, reschedule it now. Otherwise leave it in place * and let it be rescheduled later. */ if (ISSET(new->to_flags, TIMEOUT_ONQUEUE)) { if (new->to_time - ticks < old_time - ticks) { CIRCQ_REMOVE(&new->to_list); CIRCQ_INSERT_TAIL(&timeout_new, &new->to_list); } tostat.tos_readded++; ret = 0; } else { SET(new->to_flags, TIMEOUT_ONQUEUE); CIRCQ_INSERT_TAIL(&timeout_new, &new->to_list); } #if NKCOV > 0 new->to_process = curproc->p_p; #endif tostat.tos_added++; mtx_leave(&timeout_mutex); return ret; } int timeout_add_tv(struct timeout *to, const struct timeval *tv) { uint64_t to_ticks; to_ticks = (uint64_t)hz * tv->tv_sec + tv->tv_usec / tick; if (to_ticks > INT_MAX) to_ticks = INT_MAX; if (to_ticks == 0 && tv->tv_usec > 0) to_ticks = 1; return timeout_add(to, (int)to_ticks); } int timeout_add_sec(struct timeout *to, int secs) { uint64_t to_ticks; to_ticks = (uint64_t)hz * secs; if (to_ticks > INT_MAX) to_ticks = INT_MAX; if (to_ticks == 0) to_ticks = 1; return timeout_add(to, (int)to_ticks); } int timeout_add_msec(struct timeout *to, int msecs) { uint64_t to_ticks; to_ticks = (uint64_t)msecs * 1000 / tick; if (to_ticks > INT_MAX) to_ticks = INT_MAX; if (to_ticks == 0 && msecs > 0) to_ticks = 1; return timeout_add(to, (int)to_ticks); } int timeout_add_usec(struct timeout *to, int usecs) { int to_ticks = usecs / tick; if (to_ticks == 0 && usecs > 0) to_ticks = 1; return timeout_add(to, to_ticks); } int timeout_add_nsec(struct timeout *to, int nsecs) { int to_ticks = nsecs / (tick * 1000); if (to_ticks == 0 && nsecs > 0) to_ticks = 1; return timeout_add(to, to_ticks); } int timeout_at_ts(struct timeout *to, const struct timespec *abstime) { struct timespec old_abstime; int ret = 1; mtx_enter(&timeout_mutex); KASSERT(ISSET(to->to_flags, TIMEOUT_INITIALIZED | TIMEOUT_KCLOCK)); KASSERT(to->to_kclock != KCLOCK_NONE); old_abstime = to->to_abstime; to->to_abstime = *abstime; CLR(to->to_flags, TIMEOUT_TRIGGERED); if (ISSET(to->to_flags, TIMEOUT_ONQUEUE)) { if (timespeccmp(abstime, &old_abstime, <)) { CIRCQ_REMOVE(&to->to_list); CIRCQ_INSERT_TAIL(&timeout_new, &to->to_list); } tostat.tos_readded++; ret = 0; } else { SET(to->to_flags, TIMEOUT_ONQUEUE); CIRCQ_INSERT_TAIL(&timeout_new, &to->to_list); } #if NKCOV > 0 to->to_process = curproc->p_p; #endif tostat.tos_added++; mtx_leave(&timeout_mutex); return ret; } int timeout_in_nsec(struct timeout *to, uint64_t nsecs) { struct timespec abstime, interval, now; kclock_nanotime(to->to_kclock, &now); NSEC_TO_TIMESPEC(nsecs, &interval); timespecadd(&now, &interval, &abstime); return timeout_at_ts(to, &abstime); } void kclock_nanotime(int kclock, struct timespec *now) { switch (kclock) { case KCLOCK_UPTIME: nanouptime(now); break; default: panic("invalid kclock: 0x%x", kclock); } } int timeout_del(struct timeout *to) { int ret = 0; mtx_enter(&timeout_mutex); if (ISSET(to->to_flags, TIMEOUT_ONQUEUE)) { CIRCQ_REMOVE(&to->to_list); CLR(to->to_flags, TIMEOUT_ONQUEUE); tostat.tos_cancelled++; ret = 1; } CLR(to->to_flags, TIMEOUT_TRIGGERED); tostat.tos_deleted++; mtx_leave(&timeout_mutex); return ret; } int timeout_del_barrier(struct timeout *to) { int removed; timeout_sync_order(ISSET(to->to_flags, TIMEOUT_PROC)); removed = timeout_del(to); if (!removed) timeout_barrier(to); return removed; } void timeout_barrier(struct timeout *to) { int needsproc = ISSET(to->to_flags, TIMEOUT_PROC); timeout_sync_order(needsproc); if (!needsproc) { KERNEL_LOCK(); splx(splsoftclock()); KERNEL_UNLOCK(); } else { struct cond c = COND_INITIALIZER(); struct timeout barrier; timeout_set_proc(&barrier, timeout_proc_barrier, &c); barrier.to_process = curproc->p_p; mtx_enter(&timeout_mutex); SET(barrier.to_flags, TIMEOUT_ONQUEUE); CIRCQ_INSERT_TAIL(&timeout_proc, &barrier.to_list); mtx_leave(&timeout_mutex); wakeup_one(&timeout_proc); cond_wait(&c, "tmobar"); } } void timeout_proc_barrier(void *arg) { struct cond *c = arg; cond_signal(c); } uint32_t timeout_bucket(const struct timeout *to) { struct kclock *kc = &timeout_kclock[to->to_kclock]; struct timespec diff, shifted_abstime; uint32_t level; KASSERT(ISSET(to->to_flags, TIMEOUT_KCLOCK)); KASSERT(timespeccmp(&kc->kc_lastscan, &to->to_abstime, <)); timespecsub(&to->to_abstime, &kc->kc_lastscan, &diff); for (level = 0; level < nitems(timeout_level_width) - 1; level++) { if (diff.tv_sec < timeout_level_width[level]) break; } timespecadd(&to->to_abstime, &kc->kc_offset, &shifted_abstime); return level * WHEELSIZE + timeout_maskwheel(level, &shifted_abstime); } /* * Hash the absolute time into a bucket on a given level of the wheel. * * The complete hash is 32 bits. The upper 25 bits are seconds, the * lower 7 bits are nanoseconds. tv_nsec is a positive value less * than one billion so we need to divide it to isolate the desired * bits. We can't just shift it. * * The level is used to isolate an 8-bit portion of the hash. The * resulting number indicates which bucket the absolute time belongs * in on the given level of the wheel. */ uint32_t timeout_maskwheel(uint32_t level, const struct timespec *abstime) { uint32_t hi, lo; hi = abstime->tv_sec << 7; lo = abstime->tv_nsec / 7812500; return ((hi | lo) >> (level * WHEELBITS)) & WHEELMASK; } /* * This is called from hardclock() on the primary CPU at the start of * every tick. */ void timeout_hardclock_update(void) { struct timespec elapsed, now; struct kclock *kc; struct timespec *lastscan; int b, done, first, i, last, level, need_softclock, off; nanouptime(&now); lastscan = &timeout_kclock[KCLOCK_UPTIME].kc_lastscan; timespecsub(&now, lastscan, &elapsed); need_softclock = 1; mtx_enter(&timeout_mutex); MOVEBUCKET(0, ticks); if (MASKWHEEL(0, ticks) == 0) { MOVEBUCKET(1, ticks); if (MASKWHEEL(1, ticks) == 0) { MOVEBUCKET(2, ticks); if (MASKWHEEL(2, ticks) == 0) MOVEBUCKET(3, ticks); } } /* * Dump the buckets that expired while we were away. * * If the elapsed time has exceeded a level's limit then we need * to dump every bucket in the level. We have necessarily completed * a lap of that level, too, so we need to process buckets in the * next level. * * Otherwise we need to compare indices: if the index of the first * expired bucket is greater than that of the last then we have * completed a lap of the level and need to process buckets in the * next level. */ for (level = 0; level < nitems(timeout_level_width); level++) { first = timeout_maskwheel(level, lastscan); if (elapsed.tv_sec >= timeout_level_width[level]) { last = (first == 0) ? WHEELSIZE - 1 : first - 1; done = 0; } else { last = timeout_maskwheel(level, &now); done = first <= last; } off = level * WHEELSIZE; for (b = first;; b = (b + 1) % WHEELSIZE) { CIRCQ_CONCAT(&timeout_todo, &timeout_wheel_kc[off + b]); if (b == last) break; } if (done) break; } /* * Update the cached state for each kclock. */ for (i = 0; i < nitems(timeout_kclock); i++) { kc = &timeout_kclock[i]; timespecadd(&now, &kc->kc_offset, &kc->kc_lastscan); timespecsub(&kc->kc_lastscan, &tick_ts, &kc->kc_late); } if (CIRCQ_EMPTY(&timeout_new) && CIRCQ_EMPTY(&timeout_todo)) need_softclock = 0; mtx_leave(&timeout_mutex); if (need_softclock) softintr_schedule(softclock_si); } void timeout_run(struct timeout *to) { void (*fn)(void *); void *arg; int needsproc; MUTEX_ASSERT_LOCKED(&timeout_mutex); CLR(to->to_flags, TIMEOUT_ONQUEUE); SET(to->to_flags, TIMEOUT_TRIGGERED); fn = to->to_func; arg = to->to_arg; needsproc = ISSET(to->to_flags, TIMEOUT_PROC); #if NKCOV > 0 struct process *kcov_process = to->to_process; #endif mtx_leave(&timeout_mutex); timeout_sync_enter(needsproc); #if NKCOV > 0 kcov_remote_enter(KCOV_REMOTE_COMMON, kcov_process); #endif fn(arg); #if NKCOV > 0 kcov_remote_leave(KCOV_REMOTE_COMMON, kcov_process); #endif timeout_sync_leave(needsproc); mtx_enter(&timeout_mutex); } void softclock_process_kclock_timeout(struct timeout *to, int new) { struct kclock *kc = &timeout_kclock[to->to_kclock]; if (timespeccmp(&to->to_abstime, &kc->kc_lastscan, >)) { tostat.tos_scheduled++; if (!new) tostat.tos_rescheduled++; CIRCQ_INSERT_TAIL(&timeout_wheel_kc[timeout_bucket(to)], &to->to_list); return; } if (!new && timespeccmp(&to->to_abstime, &kc->kc_late, <=)) tostat.tos_late++; if (ISSET(to->to_flags, TIMEOUT_PROC)) { CIRCQ_INSERT_TAIL(&timeout_proc, &to->to_list); return; } timeout_run(to); tostat.tos_run_softclock++; } void softclock_process_tick_timeout(struct timeout *to, int new) { int delta = to->to_time - ticks; if (delta > 0) { tostat.tos_scheduled++; if (!new) tostat.tos_rescheduled++; CIRCQ_INSERT_TAIL(&BUCKET(delta, to->to_time), &to->to_list); return; } if (!new && delta < 0) tostat.tos_late++; if (ISSET(to->to_flags, TIMEOUT_PROC)) { CIRCQ_INSERT_TAIL(&timeout_proc, &to->to_list); return; } timeout_run(to); tostat.tos_run_softclock++; } /* * Timeouts are processed here instead of timeout_hardclock_update() * to avoid doing any more work at IPL_CLOCK than absolutely necessary. * Down here at IPL_SOFTCLOCK other interrupts can be serviced promptly * so the system remains responsive even if there is a surge of timeouts. */ void softclock(void *arg) { struct timeout *first_new, *to; int needsproc, new; first_new = NULL; new = 0; mtx_enter(&timeout_mutex); if (!CIRCQ_EMPTY(&timeout_new)) first_new = timeout_from_circq(CIRCQ_FIRST(&timeout_new)); CIRCQ_CONCAT(&timeout_todo, &timeout_new); while (!CIRCQ_EMPTY(&timeout_todo)) { to = timeout_from_circq(CIRCQ_FIRST(&timeout_todo)); CIRCQ_REMOVE(&to->to_list); if (to == first_new) new = 1; if (ISSET(to->to_flags, TIMEOUT_KCLOCK)) softclock_process_kclock_timeout(to, new); else softclock_process_tick_timeout(to, new); } tostat.tos_softclocks++; needsproc = !CIRCQ_EMPTY(&timeout_proc); mtx_leave(&timeout_mutex); if (needsproc) wakeup(&timeout_proc); } void softclock_create_thread(void *arg) { if (kthread_create(softclock_thread, NULL, NULL, "softclock")) panic("fork softclock"); } void softclock_thread(void *arg) { CPU_INFO_ITERATOR cii; struct cpu_info *ci; struct sleep_state sls; struct timeout *to; int s; KERNEL_ASSERT_LOCKED(); /* Be conservative for the moment */ CPU_INFO_FOREACH(cii, ci) { if (CPU_IS_PRIMARY(ci)) break; } KASSERT(ci != NULL); sched_peg_curproc(ci); s = splsoftclock(); for (;;) { sleep_setup(&sls, &timeout_proc, PSWP, "bored", 0); sleep_finish(&sls, CIRCQ_EMPTY(&timeout_proc)); mtx_enter(&timeout_mutex); while (!CIRCQ_EMPTY(&timeout_proc)) { to = timeout_from_circq(CIRCQ_FIRST(&timeout_proc)); CIRCQ_REMOVE(&to->to_list); timeout_run(to); tostat.tos_run_thread++; } tostat.tos_thread_wakeups++; mtx_leave(&timeout_mutex); } splx(s); } #ifndef SMALL_KERNEL void timeout_adjust_ticks(int adj) { struct timeout *to; struct circq *p; int new_ticks, b; /* adjusting the monotonic clock backwards would be a Bad Thing */ if (adj <= 0) return; mtx_enter(&timeout_mutex); new_ticks = ticks + adj; for (b = 0; b < nitems(timeout_wheel); b++) { p = CIRCQ_FIRST(&timeout_wheel[b]); while (p != &timeout_wheel[b]) { to = timeout_from_circq(p); p = CIRCQ_FIRST(p); /* when moving a timeout forward need to reinsert it */ if (to->to_time - ticks < adj) to->to_time = new_ticks; CIRCQ_REMOVE(&to->to_list); CIRCQ_INSERT_TAIL(&timeout_todo, &to->to_list); } } ticks = new_ticks; mtx_leave(&timeout_mutex); } #endif int timeout_sysctl(void *oldp, size_t *oldlenp, void *newp, size_t newlen) { struct timeoutstat status; mtx_enter(&timeout_mutex); memcpy(&status, &tostat, sizeof(status)); mtx_leave(&timeout_mutex); return sysctl_rdstruct(oldp, oldlenp, newp, &status, sizeof(status)); } #ifdef DDB const char *db_kclock(int); void db_show_callout_bucket(struct circq *); void db_show_timeout(struct timeout *, struct circq *); const char *db_timespec(const struct timespec *); const char * db_kclock(int kclock) { switch (kclock) { case KCLOCK_UPTIME: return "uptime"; default: return "invalid"; } } const char * db_timespec(const struct timespec *ts) { static char buf[32]; struct timespec tmp, zero; if (ts->tv_sec >= 0) { snprintf(buf, sizeof(buf), "%lld.%09ld", ts->tv_sec, ts->tv_nsec); return buf; } timespecclear(&zero); timespecsub(&zero, ts, &tmp); snprintf(buf, sizeof(buf), "-%lld.%09ld", tmp.tv_sec, tmp.tv_nsec); return buf; } void db_show_callout_bucket(struct circq *bucket) { struct circq *p; CIRCQ_FOREACH(p, bucket) db_show_timeout(timeout_from_circq(p), bucket); } void db_show_timeout(struct timeout *to, struct circq *bucket) { struct timespec remaining; struct kclock *kc; char buf[8]; db_expr_t offset; struct circq *wheel; char *name, *where; int width = sizeof(long) * 2; db_find_sym_and_offset((vaddr_t)to->to_func, &name, &offset); name = name ? name : "?"; if (bucket == &timeout_new) where = "new"; else if (bucket == &timeout_todo) where = "softint"; else if (bucket == &timeout_proc) where = "thread"; else { if (ISSET(to->to_flags, TIMEOUT_KCLOCK)) wheel = timeout_wheel_kc; else wheel = timeout_wheel; snprintf(buf, sizeof(buf), "%3ld/%1ld", (bucket - wheel) % WHEELSIZE, (bucket - wheel) / WHEELSIZE); where = buf; } if (ISSET(to->to_flags, TIMEOUT_KCLOCK)) { kc = &timeout_kclock[to->to_kclock]; timespecsub(&to->to_abstime, &kc->kc_lastscan, &remaining); db_printf("%20s %8s %7s 0x%0*lx %s\n", db_timespec(&remaining), db_kclock(to->to_kclock), where, width, (ulong)to->to_arg, name); } else { db_printf("%20d %8s %7s 0x%0*lx %s\n", to->to_time - ticks, "ticks", where, width, (ulong)to->to_arg, name); } } void db_show_callout(db_expr_t addr, int haddr, db_expr_t count, char *modif) { struct kclock *kc; int width = sizeof(long) * 2 + 2; int b, i; db_printf("%20s %8s\n", "lastscan", "clock"); db_printf("%20d %8s\n", ticks, "ticks"); for (i = 0; i < nitems(timeout_kclock); i++) { kc = &timeout_kclock[i]; db_printf("%20s %8s\n", db_timespec(&kc->kc_lastscan), db_kclock(i)); } db_printf("\n"); db_printf("%20s %8s %7s %*s %s\n", "remaining", "clock", "wheel", width, "arg", "func"); db_show_callout_bucket(&timeout_new); db_show_callout_bucket(&timeout_todo); db_show_callout_bucket(&timeout_proc); for (b = 0; b < nitems(timeout_wheel); b++) db_show_callout_bucket(&timeout_wheel[b]); for (b = 0; b < nitems(timeout_wheel_kc); b++) db_show_callout_bucket(&timeout_wheel_kc[b]); } #endif