/* $OpenBSD: vfs_cluster.c,v 1.17 2000/06/23 02:14:38 mickey Exp $ */ /* $NetBSD: vfs_cluster.c,v 1.12 1996/04/22 01:39:05 christos Exp $ */ /*- * Copyright (c) 1993 * The Regents of the University of California. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * @(#)vfs_cluster.c 8.8 (Berkeley) 7/28/94 */ #include #include #include #include #include #include #include #include #include /* * Local declarations */ struct buf *cluster_newbuf __P((struct vnode *, struct buf *, long, daddr_t, daddr_t, long, int)); struct buf *cluster_rbuild __P((struct vnode *, u_quad_t, struct buf *, daddr_t, daddr_t, long, int, long)); void cluster_wbuild __P((struct vnode *, struct buf *, long, daddr_t, int, daddr_t)); struct cluster_save *cluster_collectbufs __P((struct vnode *, struct buf *)); #ifdef DIAGNOSTIC /* * Set to 1 if reads of block zero should cause readahead to be done. * Set to 0 treats a read of block zero as a non-sequential read. * * Setting to one assumes that most reads of block zero of files are due to * sequential passes over the files (e.g. cat, sum) where additional blocks * will soon be needed. Setting to zero assumes that the majority are * surgical strikes to get particular info (e.g. size, file) where readahead * blocks will not be used and, in fact, push out other potentially useful * blocks from the cache. The former seems intuitive, but some quick tests * showed that the latter performed better from a system-wide point of view. */ int doclusterraz = 0; #define ISSEQREAD(vp, blk) \ (((blk) != 0 || doclusterraz) && \ ((blk) == (vp)->v_lastr + 1 || (blk) == (vp)->v_lastr)) #else #define ISSEQREAD(vp, blk) \ ((blk) != 0 && ((blk) == (vp)->v_lastr + 1 || (blk) == (vp)->v_lastr)) #endif /* * This replaces bread. If this is a bread at the beginning of a file and * lastr is 0, we assume this is the first read and we'll read up to two * blocks if they are sequential. After that, we'll do regular read ahead * in clustered chunks. * * There are 4 or 5 cases depending on how you count: * Desired block is in the cache: * 1 Not sequential access (0 I/Os). * 2 Access is sequential, do read-ahead (1 ASYNC). * Desired block is not in cache: * 3 Not sequential access (1 SYNC). * 4 Sequential access, next block is contiguous (1 SYNC). * 5 Sequential access, next block is not contiguous (1 SYNC, 1 ASYNC) * * There are potentially two buffers that require I/O. * bp is the block requested. * rbp is the read-ahead block. * If either is NULL, then you don't have to do the I/O. */ int cluster_read(vp, filesize, lblkno, size, cred, bpp) struct vnode *vp; u_quad_t filesize; daddr_t lblkno; long size; struct ucred *cred; struct buf **bpp; { struct buf *bp, *rbp; daddr_t blkno, ioblkno; long flags; int error, num_ra, alreadyincore; #ifdef DIAGNOSTIC if (size == 0) panic("cluster_read: size = 0"); #endif error = 0; flags = B_READ; *bpp = bp = getblk(vp, lblkno, size, 0, 0); if (bp->b_flags & B_CACHE) { /* * Desired block is in cache; do any readahead ASYNC. * Case 1, 2. */ flags |= B_ASYNC; ioblkno = lblkno + (vp->v_ralen ? vp->v_ralen : 1); alreadyincore = incore(vp, ioblkno) != NULL; bp = NULL; } else { /* Block wasn't in cache, case 3, 4, 5. */ bp->b_flags |= B_READ; ioblkno = lblkno; alreadyincore = 0; curproc->p_stats->p_ru.ru_inblock++; /* XXX */ } /* * XXX * Replace 1 with a window size based on some permutation of * maxcontig and rot_delay. This will let you figure out how * many blocks you should read-ahead (case 2, 4, 5). * * If the access isn't sequential, reset the window to 1. * Note that a read to the same block is considered sequential. * This catches the case where the file is being read sequentially, * but at smaller than the filesystem block size. */ rbp = NULL; if (!ISSEQREAD(vp, lblkno)) { vp->v_ralen = 0; vp->v_maxra = lblkno; } else if ((u_quad_t)(ioblkno + 1) * (u_quad_t)size <= filesize && !alreadyincore && !(error = VOP_BMAP(vp, ioblkno, NULL, &blkno, &num_ra)) && blkno != -1) { /* * Reading sequentially, and the next block is not in the * cache. We are going to try reading ahead. */ if (num_ra) { /* * If our desired readahead block had been read * in a previous readahead but is no longer in * core, then we may be reading ahead too far * or are not using our readahead very rapidly. * In this case we scale back the window. */ if (!alreadyincore && ioblkno <= vp->v_maxra) vp->v_ralen = max(vp->v_ralen >> 1, 1); /* * There are more sequential blocks than our current * window allows, scale up. Ideally we want to get * in sync with the filesystem maxcontig value. */ else if (num_ra > vp->v_ralen && lblkno != vp->v_lastr) vp->v_ralen = vp->v_ralen ? min(num_ra, vp->v_ralen << 1) : 1; if (num_ra > vp->v_ralen) num_ra = vp->v_ralen; } if (num_ra) /* case 2, 4 */ rbp = cluster_rbuild(vp, filesize, bp, ioblkno, blkno, size, num_ra, flags); else if (ioblkno == lblkno) { bp->b_blkno = blkno; /* Case 5: check how many blocks to read ahead */ ++ioblkno; if ((u_quad_t)(ioblkno + 1) * (u_quad_t)size > filesize || incore(vp, ioblkno) || (error = VOP_BMAP(vp, ioblkno, NULL, &blkno, &num_ra)) || blkno == -1) goto skip_readahead; /* * Adjust readahead as above. * Don't check alreadyincore, we know it is 0 from * the previous conditional. */ if (num_ra) { if (ioblkno <= vp->v_maxra) vp->v_ralen = max(vp->v_ralen >> 1, 1); else if (num_ra > vp->v_ralen && lblkno != vp->v_lastr) vp->v_ralen = vp->v_ralen ? min(num_ra,vp->v_ralen<<1) : 1; if (num_ra > vp->v_ralen) num_ra = vp->v_ralen; } flags |= B_ASYNC; if (num_ra) rbp = cluster_rbuild(vp, filesize, NULL, ioblkno, blkno, size, num_ra, flags); else { rbp = getblk(vp, ioblkno, size, 0, 0); rbp->b_flags |= flags; rbp->b_blkno = blkno; } } else { /* case 2; read ahead single block */ rbp = getblk(vp, ioblkno, size, 0, 0); rbp->b_flags |= flags; rbp->b_blkno = blkno; } if (rbp == bp) /* case 4 */ rbp = NULL; else if (rbp) /* case 2, 5 */ curproc->p_stats->p_ru.ru_inblock++; /* XXX */ } /* XXX Kirk, do we need to make sure the bp has creds? */ skip_readahead: if (bp) { if (bp->b_flags & (B_DONE | B_DELWRI)) panic("cluster_read: DONE bp"); else error = VOP_STRATEGY(bp); } if (rbp) { if (error || rbp->b_flags & (B_DONE | B_DELWRI)) { rbp->b_flags &= ~(B_ASYNC | B_READ); brelse(rbp); } else (void) VOP_STRATEGY(rbp); } /* * Recalculate our maximum readahead */ if (rbp == NULL) rbp = bp; if (rbp) vp->v_maxra = rbp->b_lblkno + (rbp->b_bcount / size) - 1; if (bp) return(biowait(bp)); return(error); } /* * If blocks are contiguous on disk, use this to provide clustered * read ahead. We will read as many blocks as possible sequentially * and then parcel them up into logical blocks in the buffer hash table. */ struct buf * cluster_rbuild(vp, filesize, bp, lbn, blkno, size, run, flags) struct vnode *vp; u_quad_t filesize; struct buf *bp; daddr_t lbn; daddr_t blkno; long size; int run; long flags; { struct cluster_save *b_save; struct buf *tbp; daddr_t bn; int i, inc; #ifdef DIAGNOSTIC if (size != vp->v_mount->mnt_stat.f_iosize) panic("cluster_rbuild: size %ld != filesize %ld", size, vp->v_mount->mnt_stat.f_iosize); #endif if ((u_quad_t)size * (u_quad_t)(lbn + run + 1) > filesize) --run; if (run == 0) { if (!bp) { bp = getblk(vp, lbn, size, 0, 0); bp->b_blkno = blkno; bp->b_flags |= flags; } return(bp); } bp = cluster_newbuf(vp, bp, flags, blkno, lbn, size, run + 1); if (bp->b_flags & (B_DONE | B_DELWRI)) return (bp); b_save = malloc(sizeof(struct buf *) * run + sizeof(struct cluster_save), M_SEGMENT, M_WAITOK); b_save->bs_bufsize = b_save->bs_bcount = size; b_save->bs_nchildren = 0; b_save->bs_children = (struct buf **)(b_save + 1); b_save->bs_saveaddr = bp->b_saveaddr; bp->b_saveaddr = (caddr_t) b_save; inc = btodb(size); for (bn = blkno + inc, i = 1; i <= run; ++i, bn += inc) { /* * A component of the cluster is already in core, * terminate the cluster early. */ if (incore(vp, lbn + i)) break; tbp = getblk(vp, lbn + i, 0, 0, 0); /* * getblk may return some memory in the buffer if there were * no empty buffers to shed it to. If there is currently * memory in the buffer, we move it down size bytes to make * room for the valid pages that cluster_callback will insert. * We do this now so we don't have to do it at interrupt time * in the callback routine. */ if (tbp->b_bufsize != 0) { caddr_t bdata = (char *)tbp->b_data; /* * No room in the buffer to add another page, * terminate the cluster early. */ if (tbp->b_bufsize + size > MAXBSIZE) { #ifdef DIAGNOSTIC if (tbp->b_bufsize > MAXBSIZE) panic("cluster_rbuild: too much memory"); #endif /* This buffer is *not* valid. */ tbp->b_flags |= B_INVAL; brelse(tbp); break; } pagemove(bdata, bdata + tbp->b_bufsize, size); } tbp->b_blkno = bn; tbp->b_flags |= flags | B_READ | B_ASYNC; b_save->bs_children[b_save->bs_nchildren++] = tbp; } /* * The cluster may have been terminated early, adjust the cluster * buffer size accordingly. If no cluster could be formed, * deallocate the cluster save info. */ if (i <= run) { if (i == 1) { bp->b_saveaddr = b_save->bs_saveaddr; bp->b_flags &= ~B_CALL; bp->b_iodone = NULL; free(b_save, M_SEGMENT); } allocbuf(bp, size * i); } return(bp); } /* * Either get a new buffer or grow the existing one. */ struct buf * cluster_newbuf(vp, bp, flags, blkno, lblkno, size, run) struct vnode *vp; struct buf *bp; long flags; daddr_t blkno; daddr_t lblkno; long size; int run; { if (!bp) { bp = getblk(vp, lblkno, size, 0, 0); if (bp->b_flags & (B_DONE | B_DELWRI)) { bp->b_blkno = blkno; return(bp); } } allocbuf(bp, run * size); bp->b_blkno = blkno; bp->b_iodone = cluster_callback; bp->b_flags |= flags | B_CALL; return(bp); } /* * Cleanup after a clustered read or write. * This is complicated by the fact that any of the buffers might have * extra memory (if there were no empty buffer headers at allocbuf time) * that we will need to shift around. */ void cluster_callback(bp) struct buf *bp; { struct cluster_save *b_save; struct buf **bpp, *tbp; long bsize; caddr_t cp; int error = 0; /* * Must propogate errors to all the components. */ if (bp->b_flags & B_ERROR) error = bp->b_error; b_save = (struct cluster_save *)(bp->b_saveaddr); bp->b_saveaddr = b_save->bs_saveaddr; bsize = b_save->bs_bufsize; cp = (char *)bp->b_data + bsize; /* * Move memory from the large cluster buffer into the component * buffers and mark IO as done on these. */ for (bpp = b_save->bs_children; b_save->bs_nchildren--; ++bpp) { tbp = *bpp; pagemove(cp, tbp->b_data, bsize); tbp->b_bufsize += bsize; tbp->b_bcount = bsize; if (error) { tbp->b_flags |= B_ERROR; tbp->b_error = error; } biodone(tbp); bp->b_bufsize -= bsize; cp += bsize; } /* * If there was excess memory in the cluster buffer, * slide it up adjacent to the remaining valid data. */ if (bp->b_bufsize != bsize) { if (bp->b_bufsize < bsize) panic("cluster_callback: too little memory"); if (bp->b_bufsize < cp - (char *)bp->b_data) pagemove(cp, (char *)bp->b_data + bsize, bp->b_bufsize - bsize); else pagemove((char *)bp->b_data + bp->b_bufsize, (char *)bp->b_data + bsize, cp - ((char *)bp->b_data + bsize)); } bp->b_bcount = bsize; bp->b_iodone = NULL; free(b_save, M_SEGMENT); if (bp->b_flags & B_ASYNC) brelse(bp); else { bp->b_flags &= ~B_WANTED; wakeup((caddr_t)bp); } } /* * Do clustered write for FFS. * * Three cases: * 1. Write is not sequential (write asynchronously) * Write is sequential: * 2. beginning of cluster - begin cluster * 3. middle of a cluster - add to cluster * 4. end of a cluster - asynchronously write cluster */ void cluster_write(bp, filesize) struct buf *bp; u_quad_t filesize; { struct vnode *vp; daddr_t lbn; int maxclen, cursize; vp = bp->b_vp; lbn = bp->b_lblkno; /* Initialize vnode to beginning of file. */ if (lbn == 0) vp->v_lasta = vp->v_clen = vp->v_cstart = vp->v_lastw = 0; if (vp->v_clen == 0 || lbn != vp->v_lastw + 1 || (bp->b_blkno != vp->v_lasta + btodb(bp->b_bcount))) { maxclen = MAXBSIZE / vp->v_mount->mnt_stat.f_iosize - 1; if (vp->v_clen != 0) { /* * Next block is not sequential. * * If we are not writing at end of file, the process * seeked to another point in the file since its * last write, or we have reached our maximum * cluster size, then push the previous cluster. * Otherwise try reallocating to make it sequential. */ cursize = vp->v_lastw - vp->v_cstart + 1; if (((u_quad_t)(lbn + 1)) * bp->b_bcount != filesize || lbn != vp->v_lastw + 1 || vp->v_clen <= cursize) { cluster_wbuild(vp, NULL, bp->b_bcount, vp->v_cstart, cursize, lbn); } else { struct buf **bpp, **endbp; struct cluster_save *buflist; buflist = cluster_collectbufs(vp, bp); endbp = &buflist->bs_children [buflist->bs_nchildren - 1]; if (VOP_REALLOCBLKS(vp, buflist)) { /* * Failed, push the previous cluster. */ for (bpp = buflist->bs_children; bpp < endbp; bpp++) brelse(*bpp); free(buflist, M_SEGMENT); cluster_wbuild(vp, NULL, bp->b_bcount, vp->v_cstart, cursize, lbn); } else { /* * Succeeded, keep building cluster. */ for (bpp = buflist->bs_children; bpp <= endbp; bpp++) bdwrite(*bpp); free(buflist, M_SEGMENT); vp->v_lastw = lbn; vp->v_lasta = bp->b_blkno; return; } } } /* * Consider beginning a cluster. * If at end of file, make cluster as large as possible, * otherwise find size of existing cluster. */ if ((u_quad_t)(lbn + 1) * (u_quad_t)bp->b_bcount != filesize && (VOP_BMAP(vp, lbn, NULL, &bp->b_blkno, &maxclen) || bp->b_blkno == -1)) { bawrite(bp); vp->v_clen = 0; vp->v_lasta = bp->b_blkno; vp->v_cstart = lbn + 1; vp->v_lastw = lbn; return; } vp->v_clen = maxclen; if (maxclen == 0) { /* I/O not contiguous */ vp->v_cstart = lbn + 1; bawrite(bp); } else { /* Wait for rest of cluster */ vp->v_cstart = lbn; bdwrite(bp); } } else if (lbn == vp->v_cstart + vp->v_clen) { /* * At end of cluster, write it out. */ cluster_wbuild(vp, bp, bp->b_bcount, vp->v_cstart, vp->v_clen + 1, lbn); vp->v_clen = 0; vp->v_cstart = lbn + 1; } else /* * In the middle of a cluster, so just delay the * I/O for now. */ bdwrite(bp); vp->v_lastw = lbn; vp->v_lasta = bp->b_blkno; } /* * This is an awful lot like cluster_rbuild...wish they could be combined. * The last lbn argument is the current block on which I/O is being * performed. Check to see that it doesn't fall in the middle of * the current block (if last_bp == NULL). */ void cluster_wbuild(vp, last_bp, size, start_lbn, len, lbn) struct vnode *vp; struct buf *last_bp; long size; daddr_t start_lbn; int len; daddr_t lbn; { struct cluster_save *b_save; struct buf *bp, *tbp; caddr_t cp; int i, s; #ifdef DIAGNOSTIC if (size != vp->v_mount->mnt_stat.f_iosize) panic("cluster_wbuild: size %ld != filesize %ld", size, vp->v_mount->mnt_stat.f_iosize); #endif redo: while ((!incore(vp, start_lbn) || start_lbn == lbn) && len) { ++start_lbn; --len; } /* Get more memory for current buffer */ if (len <= 1) { if (last_bp) { bawrite(last_bp); } else if (len) { bp = getblk(vp, start_lbn, size, 0, 0); bawrite(bp); } return; } bp = getblk(vp, start_lbn, size, 0, 0); if (!(bp->b_flags & B_DELWRI)) { ++start_lbn; --len; brelse(bp); goto redo; } /* * Extra memory in the buffer, punt on this buffer. * XXX we could handle this in most cases, but we would have to * push the extra memory down to after our max possible cluster * size and then potentially pull it back up if the cluster was * terminated prematurely--too much hassle. */ if (bp->b_bcount != bp->b_bufsize) { ++start_lbn; --len; bawrite(bp); goto redo; } --len; b_save = malloc(sizeof(struct buf *) * len + sizeof(struct cluster_save), M_SEGMENT, M_WAITOK); b_save->bs_bcount = bp->b_bcount; b_save->bs_bufsize = bp->b_bufsize; b_save->bs_nchildren = 0; b_save->bs_children = (struct buf **)(b_save + 1); b_save->bs_saveaddr = bp->b_saveaddr; bp->b_saveaddr = (caddr_t) b_save; bp->b_flags |= B_CALL; bp->b_iodone = cluster_callback; cp = (char *)bp->b_data + size; for (++start_lbn, i = 0; i < len; ++i, ++start_lbn) { /* * Block is not in core or the non-sequential block * ending our cluster was part of the cluster (in which * case we don't want to write it twice). */ if (!incore(vp, start_lbn) || (last_bp == NULL && start_lbn == lbn)) break; /* * Get the desired block buffer (unless it is the final * sequential block whose buffer was passed in explictly * as last_bp). */ if (last_bp == NULL || start_lbn != lbn) { tbp = getblk(vp, start_lbn, size, 0, 0); if (!(tbp->b_flags & B_DELWRI)) { brelse(tbp); break; } } else tbp = last_bp; ++b_save->bs_nchildren; /* Move memory from children to parent */ if (tbp->b_blkno != (bp->b_blkno + btodb(bp->b_bufsize))) { printf("Clustered Block: %d addr %x bufsize: %ld\n", bp->b_lblkno, bp->b_blkno, bp->b_bufsize); printf("Child Block: %d addr: %x\n", tbp->b_lblkno, tbp->b_blkno); panic("Clustered write to wrong blocks"); } /* * We might as well AGE the buffer here; it's either empty, or * contains data that we couldn't get rid of (but wanted to). */ tbp->b_flags &= ~(B_READ | B_DONE | B_ERROR | B_DELWRI); tbp->b_flags |= (B_ASYNC | B_AGE); if (LIST_FIRST(&tbp->b_dep) != NULL && bioops.io_start) (*bioops.io_start)(tbp); pagemove(tbp->b_data, cp, size); bp->b_bcount += size; bp->b_bufsize += size; tbp->b_bufsize -= size; s = splbio(); reassignbuf(tbp, tbp->b_vp); /* put on clean list */ ++tbp->b_vp->v_numoutput; splx(s); b_save->bs_children[i] = tbp; cp += size; } if (i == 0) { /* None to cluster */ bp->b_saveaddr = b_save->bs_saveaddr; bp->b_flags &= ~B_CALL; bp->b_iodone = NULL; free(b_save, M_SEGMENT); } bawrite(bp); if (i < len) { len -= i + 1; start_lbn += 1; goto redo; } } /* * Collect together all the buffers in a cluster. * Plus add one additional buffer. */ struct cluster_save * cluster_collectbufs(vp, last_bp) struct vnode *vp; struct buf *last_bp; { struct cluster_save *buflist; daddr_t lbn; int i, len; len = vp->v_lastw - vp->v_cstart + 1; buflist = malloc(sizeof(struct buf *) * (len + 1) + sizeof(*buflist), M_SEGMENT, M_WAITOK); buflist->bs_nchildren = 0; buflist->bs_children = (struct buf **)(buflist + 1); for (lbn = vp->v_cstart, i = 0; i < len; lbn++, i++) (void)bread(vp, lbn, last_bp->b_bcount, NOCRED, &buflist->bs_children[i]); buflist->bs_children[i] = last_bp; buflist->bs_nchildren = i + 1; return (buflist); }