/* $OpenBSD: ieee80211_output.c,v 1.77 2008/09/03 19:53:37 damien Exp $ */ /* $NetBSD: ieee80211_output.c,v 1.13 2004/05/31 11:02:55 dyoung Exp $ */ /*- * Copyright (c) 2001 Atsushi Onoe * Copyright (c) 2002, 2003 Sam Leffler, Errno Consulting * Copyright (c) 2007, 2008 Damien Bergamini * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ #include "bpfilter.h" #include "vlan.h" #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #ifdef INET #include #include #include #include #ifdef INET6 #include #endif #endif #if NVLAN > 0 #include #include #endif #include #include enum ieee80211_edca_ac ieee80211_up_to_ac(struct ieee80211com *, int); int ieee80211_classify(struct ieee80211com *, struct mbuf *); int ieee80211_mgmt_output(struct ifnet *, struct ieee80211_node *, struct mbuf *, int); u_int8_t *ieee80211_add_rsn_body(u_int8_t *, struct ieee80211com *, const struct ieee80211_node *, int); struct mbuf *ieee80211_getmgmt(int, int, u_int); struct mbuf *ieee80211_get_probe_req(struct ieee80211com *, struct ieee80211_node *); #ifndef IEEE80211_STA_ONLY struct mbuf *ieee80211_get_probe_resp(struct ieee80211com *, struct ieee80211_node *); #endif struct mbuf *ieee80211_get_auth(struct ieee80211com *, struct ieee80211_node *, u_int16_t, u_int16_t); struct mbuf *ieee80211_get_deauth(struct ieee80211com *, struct ieee80211_node *, u_int16_t); struct mbuf *ieee80211_get_assoc_req(struct ieee80211com *, struct ieee80211_node *, int); #ifndef IEEE80211_STA_ONLY struct mbuf *ieee80211_get_assoc_resp(struct ieee80211com *, struct ieee80211_node *, u_int16_t); #endif struct mbuf *ieee80211_get_disassoc(struct ieee80211com *, struct ieee80211_node *, u_int16_t); /* * IEEE 802.11 output routine. Normally this will directly call the * Ethernet output routine because 802.11 encapsulation is called * later by the driver. This function can be used to send raw frames * if the mbuf has been tagged with a 802.11 data link type. */ int ieee80211_output(struct ifnet *ifp, struct mbuf *m, struct sockaddr *dst, struct rtentry *rt) { struct m_tag *mtag; int s, len, error = 0; u_short mflags; /* Interface has to be up and running */ if ((ifp->if_flags & (IFF_UP | IFF_RUNNING)) != (IFF_UP | IFF_RUNNING)) { error = ENETDOWN; goto bad; } /* Try to get the DLT from a mbuf tag */ if ((mtag = m_tag_find(m, PACKET_TAG_DLT, NULL)) != NULL) { u_int dlt = *(u_int *)(mtag + 1); /* Fallback to ethernet for non-802.11 linktypes */ if (!(dlt == DLT_IEEE802_11 || dlt == DLT_IEEE802_11_RADIO)) goto fallback; /* * Queue message on interface without adding any * further headers, and start output if interface not * yet active. */ mflags = m->m_flags; len = m->m_pkthdr.len; s = splnet(); IFQ_ENQUEUE(&ifp->if_snd, m, NULL, error); if (error) { /* mbuf is already freed */ splx(s); printf("%s: failed to queue raw tx frame\n", ifp->if_xname); return (error); } ifp->if_obytes += len; if (mflags & M_MCAST) ifp->if_omcasts++; if ((ifp->if_flags & IFF_OACTIVE) == 0) (*ifp->if_start)(ifp); splx(s); return (error); } fallback: return (ether_output(ifp, m, dst, rt)); bad: if (m) m_freem(m); return (error); } /* * Send a management frame to the specified node. The node pointer * must have a reference as the pointer will be passed to the driver * and potentially held for a long time. If the frame is successfully * dispatched to the driver, then it is responsible for freeing the * reference (and potentially free'ing up any associated storage). */ int ieee80211_mgmt_output(struct ifnet *ifp, struct ieee80211_node *ni, struct mbuf *m, int type) { struct ieee80211com *ic = (void *)ifp; struct ieee80211_frame *wh; if (ni == NULL) panic("null node"); ni->ni_inact = 0; /* * Yech, hack alert! We want to pass the node down to the * driver's start routine. We could stick this in an m_tag * and tack that on to the mbuf. However that's rather * expensive to do for every frame so instead we stuff it in * the rcvif field since outbound frames do not (presently) * use this. */ M_PREPEND(m, sizeof(struct ieee80211_frame), M_DONTWAIT); if (m == NULL) return ENOMEM; m->m_pkthdr.rcvif = (void *)ni; wh = mtod(m, struct ieee80211_frame *); wh->i_fc[0] = IEEE80211_FC0_VERSION_0 | IEEE80211_FC0_TYPE_MGT | type; wh->i_fc[1] = IEEE80211_FC1_DIR_NODS; *(u_int16_t *)&wh->i_dur[0] = 0; *(u_int16_t *)&wh->i_seq[0] = htole16(ni->ni_txseq << IEEE80211_SEQ_SEQ_SHIFT); ni->ni_txseq++; IEEE80211_ADDR_COPY(wh->i_addr1, ni->ni_macaddr); IEEE80211_ADDR_COPY(wh->i_addr2, ic->ic_myaddr); IEEE80211_ADDR_COPY(wh->i_addr3, ni->ni_bssid); /* check if protection is required for this mgmt frame */ if ((ic->ic_caps & IEEE80211_C_MFP) && (type == IEEE80211_FC0_SUBTYPE_DISASSOC || type == IEEE80211_FC0_SUBTYPE_DEAUTH || type == IEEE80211_FC0_SUBTYPE_ACTION)) { /* * Hack: we should not set the Protected bit in outgoing * group management frames, however it is used as an * indication to the drivers that they must encrypt the * frame. Drivers should clear this bit from group * management frames (software crypto code will do it). * XXX could use an mbuf flag.. */ if (IEEE80211_IS_MULTICAST(wh->i_addr1) || (ni->ni_flags & IEEE80211_NODE_TXMGMTPROT)) wh->i_fc[1] |= IEEE80211_FC1_PROTECTED; } if (ifp->if_flags & IFF_DEBUG) { /* avoid to print too many frames */ if ( #ifndef IEEE80211_STA_ONLY ic->ic_opmode == IEEE80211_M_IBSS || #endif #ifdef IEEE80211_DEBUG ieee80211_debug > 1 || #endif (type & IEEE80211_FC0_SUBTYPE_MASK) != IEEE80211_FC0_SUBTYPE_PROBE_RESP) printf("%s: sending %s to %s on channel %u mode %s\n", ifp->if_xname, ieee80211_mgt_subtype_name[ (type & IEEE80211_FC0_SUBTYPE_MASK) >> IEEE80211_FC0_SUBTYPE_SHIFT], ether_sprintf(ni->ni_macaddr), ieee80211_chan2ieee(ic, ni->ni_chan), ieee80211_phymode_name[ ieee80211_chan2mode(ic, ni->ni_chan)]); } #ifndef IEEE80211_STA_ONLY if (ic->ic_opmode == IEEE80211_M_HOSTAP && ieee80211_pwrsave(ic, m, ni) != 0) return 0; #endif IF_ENQUEUE(&ic->ic_mgtq, m); ifp->if_timer = 1; (*ifp->if_start)(ifp); return 0; } /*- * EDCA tables are computed using the following formulas: * * 1) EDCATable (non-AP QSTA) * * AC CWmin CWmax AIFSN TXOP limit(ms) * ------------------------------------------------------------- * AC_BK aCWmin aCWmax 7 0 * AC_BE aCWmin aCWmax 3 0 * AC_VI (aCWmin+1)/2-1 aCWmin 2 agn=3.008 b=6.016 others=0 * AC_VO (aCWmin+1)/4-1 (aCWmin+1)/2-1 2 agn=1.504 b=3.264 others=0 * * 2) QAPEDCATable (QAP) * * AC CWmin CWmax AIFSN TXOP limit(ms) * ------------------------------------------------------------- * AC_BK aCWmin aCWmax 7 0 * AC_BE aCWmin 4*(aCWmin+1)-1 3 0 * AC_VI (aCWmin+1)/2-1 aCWmin 1 agn=3.008 b=6.016 others=0 * AC_VO (aCWmin+1)/4-1 (aCWmin+1)/2-1 1 agn=1.504 b=3.264 others=0 * * and the following aCWmin/aCWmax values: * * PHY aCWmin aCWmax * --------------------------- * 11A 15 1023 * 11B 31 1023 * 11G 15* 1023 (*) aCWmin(1) * Turbo A/G 7 1023 (Atheros proprietary mode) */ static const struct ieee80211_edca_ac_params ieee80211_edca_table[IEEE80211_MODE_MAX][EDCA_NUM_AC] = { [IEEE80211_MODE_11B] = { [EDCA_AC_BK] = { 5, 10, 7, 0 }, [EDCA_AC_BE] = { 5, 10, 3, 0 }, [EDCA_AC_VI] = { 4, 5, 2, 188 }, [EDCA_AC_VO] = { 3, 4, 2, 102 } }, [IEEE80211_MODE_11A] = { [EDCA_AC_BK] = { 4, 10, 7, 0 }, [EDCA_AC_BE] = { 4, 10, 3, 0 }, [EDCA_AC_VI] = { 3, 4, 2, 94 }, [EDCA_AC_VO] = { 2, 3, 2, 47 } }, [IEEE80211_MODE_11G] = { [EDCA_AC_BK] = { 4, 10, 7, 0 }, [EDCA_AC_BE] = { 4, 10, 3, 0 }, [EDCA_AC_VI] = { 3, 4, 2, 94 }, [EDCA_AC_VO] = { 2, 3, 2, 47 } }, [IEEE80211_MODE_TURBO] = { [EDCA_AC_BK] = { 3, 10, 7, 0 }, [EDCA_AC_BE] = { 3, 10, 2, 0 }, [EDCA_AC_VI] = { 2, 3, 2, 94 }, [EDCA_AC_VO] = { 2, 2, 1, 47 } } }; #ifndef IEEE80211_STA_ONLY static const struct ieee80211_edca_ac_params ieee80211_qap_edca_table[IEEE80211_MODE_MAX][EDCA_NUM_AC] = { [IEEE80211_MODE_11B] = { [EDCA_AC_BK] = { 5, 10, 7, 0 }, [EDCA_AC_BE] = { 5, 7, 3, 0 }, [EDCA_AC_VI] = { 4, 5, 1, 188 }, [EDCA_AC_VO] = { 3, 4, 1, 102 } }, [IEEE80211_MODE_11A] = { [EDCA_AC_BK] = { 4, 10, 7, 0 }, [EDCA_AC_BE] = { 4, 6, 3, 0 }, [EDCA_AC_VI] = { 3, 4, 1, 94 }, [EDCA_AC_VO] = { 2, 3, 1, 47 } }, [IEEE80211_MODE_11G] = { [EDCA_AC_BK] = { 4, 10, 7, 0 }, [EDCA_AC_BE] = { 4, 6, 3, 0 }, [EDCA_AC_VI] = { 3, 4, 1, 94 }, [EDCA_AC_VO] = { 2, 3, 1, 47 } }, [IEEE80211_MODE_TURBO] = { [EDCA_AC_BK] = { 3, 10, 7, 0 }, [EDCA_AC_BE] = { 3, 5, 2, 0 }, [EDCA_AC_VI] = { 2, 3, 1, 94 }, [EDCA_AC_VO] = { 2, 2, 1, 47 } } }; #endif /* IEEE80211_STA_ONLY */ /* * Return the EDCA Access Category to be used for transmitting a frame with * user-priority `up'. */ enum ieee80211_edca_ac ieee80211_up_to_ac(struct ieee80211com *ic, int up) { /* see Table 9-1 */ static const enum ieee80211_edca_ac up_to_ac[] = { EDCA_AC_BE, /* BE */ EDCA_AC_BK, /* BK */ EDCA_AC_BK, /* -- */ EDCA_AC_BE, /* EE */ EDCA_AC_VI, /* CL */ EDCA_AC_VI, /* VI */ EDCA_AC_VO, /* VO */ EDCA_AC_VO /* NC */ }; enum ieee80211_edca_ac ac; ac = (up <= 7) ? up_to_ac[up] : EDCA_AC_BE; #ifndef IEEE80211_STA_ONLY if (ic->ic_opmode == IEEE80211_M_HOSTAP) return ac; #endif /* * We do not support the admission control procedure defined in * IEEE Std 802.11-2007 section 9.9.3.1.2. The spec says that * non-AP QSTAs that don't support this procedure shall use EDCA * parameters of a lower priority AC that does not require * admission control. */ while (ac != EDCA_AC_BK && ic->ic_edca_ac[ac].ac_acm) { switch (ac) { case EDCA_AC_BK: /* can't get there */ break; case EDCA_AC_BE: /* BE shouldn't require admission control */ ac = EDCA_AC_BK; break; case EDCA_AC_VI: ac = EDCA_AC_BE; break; case EDCA_AC_VO: ac = EDCA_AC_VI; break; } } return ac; } /* * Get mbuf's user-priority: if mbuf is not VLAN tagged, select user-priority * based on the DSCP (Differentiated Services Codepoint) field. */ int ieee80211_classify(struct ieee80211com *ic, struct mbuf *m) { #ifdef INET struct ether_header *eh; u_int8_t ds_field; #endif #if NVLAN > 0 if ((m->m_flags & M_PROTO1) == M_PROTO1 && m->m_pkthdr.rcvif != NULL) { struct ifvlan *ifv = m->m_pkthdr.rcvif->if_softc; /* use VLAN 802.1D user-priority */ if (ifv->ifv_prio <= 7) return ifv->ifv_prio; } #endif #ifdef INET eh = mtod(m, struct ether_header *); if (eh->ether_type == htons(ETHERTYPE_IP)) { struct ip *ip = (struct ip *)&eh[1]; if (ip->ip_v != 4) return 0; ds_field = ip->ip_tos; } #ifdef INET6 else if (eh->ether_type == htons(ETHERTYPE_IPV6)) { struct ip6_hdr *ip6 = (struct ip6_hdr *)&eh[1]; u_int32_t flowlabel; flowlabel = ntohl(ip6->ip6_flow); if ((flowlabel >> 28) != 6) return 0; ds_field = (flowlabel >> 20) & 0xff; } #endif /* INET6 */ else /* neither IPv4 nor IPv6 */ return 0; /* * Map Differentiated Services Codepoint field (see RFC2474). * Preserves backward compatibility with IP Precedence field. */ switch (ds_field & 0xfc) { case IPTOS_PREC_PRIORITY: return 2; case IPTOS_PREC_IMMEDIATE: return 1; case IPTOS_PREC_FLASH: return 3; case IPTOS_PREC_FLASHOVERRIDE: return 4; case IPTOS_PREC_CRITIC_ECP: return 5; case IPTOS_PREC_INTERNETCONTROL: return 6; case IPTOS_PREC_NETCONTROL: return 7; } #endif /* INET */ return 0; /* default to Best-Effort */ } /* * Encapsulate an outbound data frame. The mbuf chain is updated and * a reference to the destination node is returned. If an error is * encountered NULL is returned and the node reference will also be NULL. * * NB: The caller is responsible for free'ing a returned node reference. * The convention is ic_bss is not reference counted; the caller must * maintain that. */ struct mbuf * ieee80211_encap(struct ifnet *ifp, struct mbuf *m, struct ieee80211_node **pni) { struct ieee80211com *ic = (void *)ifp; struct ether_header eh; struct ieee80211_frame *wh; struct ieee80211_node *ni = NULL; struct llc *llc; struct m_tag *mtag; u_int8_t *addr; u_int dlt, hdrlen; int addqos, tid; /* Handle raw frames if mbuf is tagged as 802.11 */ if ((mtag = m_tag_find(m, PACKET_TAG_DLT, NULL)) != NULL) { dlt = *(u_int *)(mtag + 1); if (!(dlt == DLT_IEEE802_11 || dlt == DLT_IEEE802_11_RADIO)) goto fallback; wh = mtod(m, struct ieee80211_frame *); if (m->m_pkthdr.len < sizeof(struct ieee80211_frame_min)) goto bad; if ((wh->i_fc[0] & IEEE80211_FC0_VERSION_MASK) != IEEE80211_FC0_VERSION_0) goto bad; switch (wh->i_fc[1] & IEEE80211_FC1_DIR_MASK) { case IEEE80211_FC1_DIR_NODS: case IEEE80211_FC1_DIR_FROMDS: addr = wh->i_addr1; break; case IEEE80211_FC1_DIR_DSTODS: case IEEE80211_FC1_DIR_TODS: addr = wh->i_addr3; break; default: goto bad; } ni = ieee80211_find_txnode(ic, addr); if (ni == NULL) ni = ieee80211_ref_node(ic->ic_bss); if (ni == NULL) { printf("%s: no node for dst %s, " "discard raw tx frame\n", ifp->if_xname, ether_sprintf(addr)); ic->ic_stats.is_tx_nonode++; goto bad; } ni->ni_inact = 0; *pni = ni; return (m); } fallback: if (m->m_len < sizeof(struct ether_header)) { m = m_pullup(m, sizeof(struct ether_header)); if (m == NULL) { ic->ic_stats.is_tx_nombuf++; goto bad; } } memcpy(&eh, mtod(m, caddr_t), sizeof(struct ether_header)); ni = ieee80211_find_txnode(ic, eh.ether_dhost); if (ni == NULL) { DPRINTF(("no node for dst %s, discard frame\n", ether_sprintf(eh.ether_dhost))); ic->ic_stats.is_tx_nonode++; goto bad; } if ((ic->ic_flags & IEEE80211_F_RSNON) && !ni->ni_port_valid && eh.ether_type != htons(ETHERTYPE_PAE)) { DPRINTF(("port not valid: %s\n", ether_sprintf(eh.ether_dhost))); ic->ic_stats.is_tx_noauth++; goto bad; } if ((ic->ic_flags & IEEE80211_F_COUNTERM) && ni->ni_rsncipher == IEEE80211_CIPHER_TKIP) /* XXX TKIP countermeasures! */; ni->ni_inact = 0; if ((ic->ic_flags & IEEE80211_F_QOS) && (ni->ni_flags & IEEE80211_NODE_QOS) && /* do not QoS-encapsulate EAPOL frames */ eh.ether_type != htons(ETHERTYPE_PAE)) { tid = ieee80211_classify(ic, m); hdrlen = sizeof(struct ieee80211_qosframe); addqos = 1; } else { hdrlen = sizeof(struct ieee80211_frame); addqos = 0; } m_adj(m, sizeof(struct ether_header) - LLC_SNAPFRAMELEN); llc = mtod(m, struct llc *); llc->llc_dsap = llc->llc_ssap = LLC_SNAP_LSAP; llc->llc_control = LLC_UI; llc->llc_snap.org_code[0] = 0; llc->llc_snap.org_code[1] = 0; llc->llc_snap.org_code[2] = 0; llc->llc_snap.ether_type = eh.ether_type; M_PREPEND(m, hdrlen, M_DONTWAIT); if (m == NULL) { ic->ic_stats.is_tx_nombuf++; goto bad; } wh = mtod(m, struct ieee80211_frame *); wh->i_fc[0] = IEEE80211_FC0_VERSION_0 | IEEE80211_FC0_TYPE_DATA; *(u_int16_t *)&wh->i_dur[0] = 0; if (addqos) { struct ieee80211_qosframe *qwh = (struct ieee80211_qosframe *)wh; qwh->i_fc[0] |= IEEE80211_FC0_SUBTYPE_QOS; qwh->i_qos[0] = tid; if (ic->ic_tid_noack & (1 << tid)) { qwh->i_qos[0] |= IEEE80211_QOS_ACK_POLICY_NOACK << IEEE80211_QOS_ACK_POLICY_SHIFT; } qwh->i_qos[1] = 0; /* unused/set by hardware */ *(u_int16_t *)&qwh->i_seq[0] = htole16(ni->ni_qos_txseqs[tid] << IEEE80211_SEQ_SEQ_SHIFT); ni->ni_qos_txseqs[tid]++; } else { *(u_int16_t *)&wh->i_seq[0] = htole16(ni->ni_txseq << IEEE80211_SEQ_SEQ_SHIFT); ni->ni_txseq++; } switch (ic->ic_opmode) { case IEEE80211_M_STA: wh->i_fc[1] = IEEE80211_FC1_DIR_TODS; IEEE80211_ADDR_COPY(wh->i_addr1, ni->ni_bssid); IEEE80211_ADDR_COPY(wh->i_addr2, eh.ether_shost); IEEE80211_ADDR_COPY(wh->i_addr3, eh.ether_dhost); break; #ifndef IEEE80211_STA_ONLY case IEEE80211_M_IBSS: case IEEE80211_M_AHDEMO: wh->i_fc[1] = IEEE80211_FC1_DIR_NODS; IEEE80211_ADDR_COPY(wh->i_addr1, eh.ether_dhost); IEEE80211_ADDR_COPY(wh->i_addr2, eh.ether_shost); IEEE80211_ADDR_COPY(wh->i_addr3, ic->ic_bss->ni_bssid); break; case IEEE80211_M_HOSTAP: wh->i_fc[1] = IEEE80211_FC1_DIR_FROMDS; IEEE80211_ADDR_COPY(wh->i_addr1, eh.ether_dhost); IEEE80211_ADDR_COPY(wh->i_addr2, ni->ni_bssid); IEEE80211_ADDR_COPY(wh->i_addr3, eh.ether_shost); break; #endif default: /* should not get there */ goto bad; } if ((ic->ic_flags & IEEE80211_F_WEPON) || ((ic->ic_flags & IEEE80211_F_RSNON) && (ni->ni_flags & IEEE80211_NODE_TXPROT))) wh->i_fc[1] |= IEEE80211_FC1_PROTECTED; #ifndef IEEE80211_STA_ONLY if (ic->ic_opmode == IEEE80211_M_HOSTAP && ieee80211_pwrsave(ic, m, ni) != 0) { *pni = NULL; return NULL; } #endif *pni = ni; return m; bad: if (m != NULL) m_freem(m); if (ni != NULL) ieee80211_release_node(ic, ni); *pni = NULL; return NULL; } /* * Add a Capability Information field to a frame (see 7.3.1.4). */ u_int8_t * ieee80211_add_capinfo(u_int8_t *frm, struct ieee80211com *ic, const struct ieee80211_node *ni) { u_int16_t capinfo; #ifndef IEEE80211_STA_ONLY if (ic->ic_opmode == IEEE80211_M_IBSS) capinfo = IEEE80211_CAPINFO_IBSS; else if (ic->ic_opmode == IEEE80211_M_HOSTAP) capinfo = IEEE80211_CAPINFO_ESS; else #endif capinfo = 0; #ifndef IEEE80211_STA_ONLY if (ic->ic_opmode == IEEE80211_M_HOSTAP && (ic->ic_flags & (IEEE80211_F_WEPON | IEEE80211_F_RSNON))) capinfo |= IEEE80211_CAPINFO_PRIVACY; #endif /* NB: some 11a AP's reject the request when short preamble is set */ if ((ic->ic_flags & IEEE80211_F_SHPREAMBLE) && IEEE80211_IS_CHAN_2GHZ(ni->ni_chan)) capinfo |= IEEE80211_CAPINFO_SHORT_PREAMBLE; if (ic->ic_flags & IEEE80211_F_SHSLOT) capinfo |= IEEE80211_CAPINFO_SHORT_SLOTTIME; LE_WRITE_2(frm, capinfo); return frm + 2; } /* * Add an SSID element to a frame (see 7.3.2.1). */ u_int8_t * ieee80211_add_ssid(u_int8_t *frm, const u_int8_t *ssid, u_int len) { *frm++ = IEEE80211_ELEMID_SSID; *frm++ = len; memcpy(frm, ssid, len); return frm + len; } /* * Add a supported rates element to a frame (see 7.3.2.2). */ u_int8_t * ieee80211_add_rates(u_int8_t *frm, const struct ieee80211_rateset *rs) { int nrates; *frm++ = IEEE80211_ELEMID_RATES; nrates = min(rs->rs_nrates, IEEE80211_RATE_SIZE); *frm++ = nrates; memcpy(frm, rs->rs_rates, nrates); return frm + nrates; } #ifndef IEEE80211_STA_ONLY /* * Add a DS Parameter Set element to a frame (see 7.3.2.4). */ u_int8_t * ieee80211_add_ds_params(u_int8_t *frm, struct ieee80211com *ic, const struct ieee80211_node *ni) { *frm++ = IEEE80211_ELEMID_DSPARMS; *frm++ = 1; *frm++ = ieee80211_chan2ieee(ic, ni->ni_chan); return frm; } /* * Add a TIM element to a frame (see 7.3.2.6 and Annex L). */ u_int8_t * ieee80211_add_tim(u_int8_t *frm, struct ieee80211com *ic) { u_int i, offset = 0, len; /* find first non-zero octet in the virtual bit map */ for (i = 0; i < ic->ic_tim_len && ic->ic_tim_bitmap[i] == 0; i++); /* clear the lsb as it is reserved for the broadcast indication bit */ if (i < ic->ic_tim_len) offset = i & ~1; /* find last non-zero octet in the virtual bit map */ for (i = ic->ic_tim_len - 1; i > 0 && ic->ic_tim_bitmap[i] == 0; i--); len = i - offset + 1; *frm++ = IEEE80211_ELEMID_TIM; *frm++ = len + 3; /* length */ *frm++ = ic->ic_dtim_count; /* DTIM count */ *frm++ = ic->ic_dtim_period; /* DTIM period */ /* Bitmap Control */ *frm = offset; /* set broadcast/multicast indication bit if necessary */ if (ic->ic_dtim_count == 0 && ic->ic_tim_mcast_pending) *frm |= 0x01; frm++; /* Partial Virtual Bitmap */ memcpy(frm, &ic->ic_tim_bitmap[offset], len); return frm + len; } /* * Add an IBSS Parameter Set element to a frame (see 7.3.2.7). */ u_int8_t * ieee80211_add_ibss_params(u_int8_t *frm, const struct ieee80211_node *ni) { *frm++ = IEEE80211_ELEMID_IBSSPARMS; *frm++ = 2; LE_WRITE_2(frm, 0); /* TODO: ATIM window */ return frm + 2; } /* * Add an EDCA Parameter Set element to a frame (see 7.3.2.29). */ u_int8_t * ieee80211_add_edca_params(u_int8_t *frm, struct ieee80211com *ic) { const struct ieee80211_edca_ac_params *edca; int aci; *frm++ = IEEE80211_ELEMID_EDCAPARMS; *frm++ = 18; /* length */ *frm++ = 0; /* QoS Info */ *frm++ = 0; /* reserved */ /* setup AC Parameter Records */ edca = ieee80211_qap_edca_table[ic->ic_curmode]; for (aci = 0; aci < EDCA_NUM_AC; aci++) { const struct ieee80211_edca_ac_params *ac = &edca[aci]; *frm++ = (aci << 5) | ((ac->ac_acm & 0x1) << 4) | (ac->ac_aifsn & 0xf); *frm++ = (ac->ac_ecwmax << 4) | (ac->ac_ecwmin & 0xf); LE_WRITE_2(frm, ac->ac_txoplimit); frm += 2; } return frm; } /* * Add an ERP element to a frame (see 7.3.2.13). */ u_int8_t * ieee80211_add_erp(u_int8_t *frm, struct ieee80211com *ic) { u_int8_t erp; *frm++ = IEEE80211_ELEMID_ERP; *frm++ = 1; erp = 0; /* * The NonERP_Present bit shall be set to 1 when a NonERP STA * is associated with the BSS. */ if (ic->ic_nonerpsta != 0) erp |= IEEE80211_ERP_NON_ERP_PRESENT; /* * If one or more NonERP STAs are associated in the BSS, the * Use_Protection bit shall be set to 1 in transmitted ERP * Information Elements. */ if (ic->ic_flags & IEEE80211_F_USEPROT) erp |= IEEE80211_ERP_USE_PROTECTION; /* * The Barker_Preamble_Mode bit shall be set to 1 by the ERP * Information Element sender if one or more associated NonERP * STAs are not short preamble capable. */ if (!(ic->ic_flags & IEEE80211_F_SHPREAMBLE)) erp |= IEEE80211_ERP_BARKER_MODE; *frm++ = erp; return frm; } #endif /* IEEE80211_STA_ONLY */ /* * Add a QoS Capability element to a frame (see 7.3.2.35). */ u_int8_t * ieee80211_add_qos_capability(u_int8_t *frm, struct ieee80211com *ic) { *frm++ = IEEE80211_ELEMID_QOS_CAP; *frm++ = 1; *frm++ = 0; /* QoS Info */ return frm; } /* * Add an RSN element to a frame (see 7.3.2.25). */ u_int8_t * ieee80211_add_rsn_body(u_int8_t *frm, struct ieee80211com *ic, const struct ieee80211_node *ni, int wpa) { const u_int8_t *oui = wpa ? MICROSOFT_OUI : IEEE80211_OUI; u_int8_t *pcount; u_int16_t count; /* write Version field */ LE_WRITE_2(frm, 1); frm += 2; /* write Group Data Cipher Suite field (see Table 20da) */ memcpy(frm, oui, 3); frm += 3; switch (ni->ni_rsngroupcipher) { case IEEE80211_CIPHER_WEP40: *frm++ = 1; break; case IEEE80211_CIPHER_TKIP: *frm++ = 2; break; case IEEE80211_CIPHER_CCMP: *frm++ = 4; break; case IEEE80211_CIPHER_WEP104: *frm++ = 5; break; default: /* can't get there */ panic("invalid group data cipher!"); } pcount = frm; frm += 2; count = 0; /* write Pairwise Cipher Suite List */ if (ni->ni_rsnciphers & IEEE80211_CIPHER_USEGROUP) { memcpy(frm, oui, 3); frm += 3; *frm++ = 0; count++; } if (ni->ni_rsnciphers & IEEE80211_CIPHER_TKIP) { memcpy(frm, oui, 3); frm += 3; *frm++ = 2; count++; } if (ni->ni_rsnciphers & IEEE80211_CIPHER_CCMP) { memcpy(frm, oui, 3); frm += 3; *frm++ = 4; count++; } /* write Pairwise Cipher Suite Count field */ LE_WRITE_2(pcount, count); pcount = frm; frm += 2; count = 0; /* write AKM Suite List (see Table 20dc) */ if (ni->ni_rsnakms & IEEE80211_AKM_8021X) { memcpy(frm, oui, 3); frm += 3; *frm++ = 1; count++; } if (ni->ni_rsnakms & IEEE80211_AKM_PSK) { memcpy(frm, oui, 3); frm += 3; *frm++ = 2; count++; } if (ni->ni_rsnakms & IEEE80211_AKM_SHA256_8021X) { memcpy(frm, oui, 3); frm += 3; *frm++ = 5; count++; } if (ni->ni_rsnakms & IEEE80211_AKM_SHA256_PSK) { memcpy(frm, oui, 3); frm += 3; *frm++ = 6; count++; } /* write AKM Suite List Count field */ LE_WRITE_2(pcount, count); if (wpa) return frm; /* write RSN Capabilities field */ LE_WRITE_2(frm, ni->ni_rsncaps); frm += 2; if (!(ic->ic_caps & IEEE80211_C_MFP)) return frm; /* no PMKID List for now */ LE_WRITE_2(frm, 0); frm += 2; /* write Group Integrity Cipher Suite field */ memcpy(frm, oui, 3); frm += 3; switch (ic->ic_rsngroupmgmtcipher) { case IEEE80211_CIPHER_AES128_CMAC: *frm++ = 6; break; default: /* can't get there */ panic("invalid integrity group cipher!"); } return frm; } u_int8_t * ieee80211_add_rsn(u_int8_t *frm, struct ieee80211com *ic, const struct ieee80211_node *ni) { u_int8_t *plen; *frm++ = IEEE80211_ELEMID_RSN; plen = frm++; /* length filled in later */ frm = ieee80211_add_rsn_body(frm, ic, ni, 0); /* write length field */ *plen = frm - plen - 1; return frm; } /* * Add a vendor-specific WPA element to a frame. * This is required for compatibility with Wi-Fi Alliance WPA. */ u_int8_t * ieee80211_add_wpa(u_int8_t *frm, struct ieee80211com *ic, const struct ieee80211_node *ni) { u_int8_t *plen; *frm++ = IEEE80211_ELEMID_VENDOR; plen = frm++; /* length filled in later */ memcpy(frm, MICROSOFT_OUI, 3); frm += 3; *frm++ = 1; /* WPA */ frm = ieee80211_add_rsn_body(frm, ic, ni, 1); /* write length field */ *plen = frm - plen - 1; return frm; } /* * Add an extended supported rates element to a frame (see 7.3.2.14). */ u_int8_t * ieee80211_add_xrates(u_int8_t *frm, const struct ieee80211_rateset *rs) { int nrates; KASSERT(rs->rs_nrates > IEEE80211_RATE_SIZE); *frm++ = IEEE80211_ELEMID_XRATES; nrates = rs->rs_nrates - IEEE80211_RATE_SIZE; *frm++ = nrates; memcpy(frm, rs->rs_rates + IEEE80211_RATE_SIZE, nrates); return frm + nrates; } struct mbuf * ieee80211_getmgmt(int flags, int type, u_int pktlen) { struct mbuf *m; /* reserve space for 802.11 header */ pktlen += sizeof(struct ieee80211_frame); if (pktlen > MCLBYTES) panic("management frame too large: %u", pktlen); MGETHDR(m, flags, type); if (m == NULL) return NULL; if (pktlen > MHLEN) { MCLGET(m, flags); if (!(m->m_flags & M_EXT)) return m_free(m); } m->m_data += sizeof(struct ieee80211_frame); return m; } /*- * Probe request frame format: * [tlv] SSID * [tlv] Supported rates * [tlv] Extended Supported Rates (802.11g) */ struct mbuf * ieee80211_get_probe_req(struct ieee80211com *ic, struct ieee80211_node *ni) { const struct ieee80211_rateset *rs = &ic->ic_sup_rates[ieee80211_chan2mode(ic, ni->ni_chan)]; struct mbuf *m; u_int8_t *frm; m = ieee80211_getmgmt(M_DONTWAIT, MT_DATA, 2 + ic->ic_des_esslen + 2 + min(rs->rs_nrates, IEEE80211_RATE_SIZE) + ((rs->rs_nrates > IEEE80211_RATE_SIZE) ? 2 + rs->rs_nrates - IEEE80211_RATE_SIZE : 0)); if (m == NULL) return NULL; frm = mtod(m, u_int8_t *); frm = ieee80211_add_ssid(frm, ic->ic_des_essid, ic->ic_des_esslen); frm = ieee80211_add_rates(frm, rs); if (rs->rs_nrates > IEEE80211_RATE_SIZE) frm = ieee80211_add_xrates(frm, rs); m->m_pkthdr.len = m->m_len = frm - mtod(m, u_int8_t *); return m; } #ifndef IEEE80211_STA_ONLY /*- * Probe response frame format: * [8] Timestamp * [2] Beacon interval * [2] Capability * [tlv] Service Set Identifier (SSID) * [tlv] Supported rates * [tlv*] DS Parameter Set (802.11g) * [tlv] ERP Information (802.11g) * [tlv] Extended Supported Rates (802.11g) * [tlv] RSN (802.11i) * [tlv] EDCA Parameter Set (802.11e) */ struct mbuf * ieee80211_get_probe_resp(struct ieee80211com *ic, struct ieee80211_node *ni) { const struct ieee80211_rateset *rs = &ic->ic_bss->ni_rates; struct mbuf *m; u_int8_t *frm; m = ieee80211_getmgmt(M_DONTWAIT, MT_DATA, 8 + 2 + 2 + 2 + ni->ni_esslen + 2 + min(rs->rs_nrates, IEEE80211_RATE_SIZE) + 2 + 1 + ((ic->ic_opmode == IEEE80211_M_IBSS) ? 2 + 2 : 0) + ((ic->ic_curmode == IEEE80211_MODE_11G) ? 2 + 1 : 0) + ((rs->rs_nrates > IEEE80211_RATE_SIZE) ? 2 + rs->rs_nrates - IEEE80211_RATE_SIZE : 0) + (((ic->ic_flags & IEEE80211_F_RSNON) && (ic->ic_bss->ni_rsnprotos & IEEE80211_PROTO_RSN)) ? 2 + IEEE80211_RSNIE_MAXLEN : 0) + ((ic->ic_flags & IEEE80211_F_QOS) ? 2 + 18 : 0) + (((ic->ic_flags & IEEE80211_F_RSNON) && (ic->ic_bss->ni_rsnprotos & IEEE80211_PROTO_WPA)) ? 2 + IEEE80211_WPAIE_MAXLEN : 0)); if (m == NULL) return NULL; frm = mtod(m, u_int8_t *); memset(frm, 0, 8); frm += 8; /* timestamp is set by hardware */ LE_WRITE_2(frm, ic->ic_bss->ni_intval); frm += 2; frm = ieee80211_add_capinfo(frm, ic, ni); frm = ieee80211_add_ssid(frm, ic->ic_bss->ni_essid, ic->ic_bss->ni_esslen); frm = ieee80211_add_rates(frm, rs); frm = ieee80211_add_ds_params(frm, ic, ni); if (ic->ic_opmode == IEEE80211_M_IBSS) frm = ieee80211_add_ibss_params(frm, ni); if (ic->ic_curmode == IEEE80211_MODE_11G) frm = ieee80211_add_erp(frm, ic); if (rs->rs_nrates > IEEE80211_RATE_SIZE) frm = ieee80211_add_xrates(frm, rs); if ((ic->ic_flags & IEEE80211_F_RSNON) && (ic->ic_bss->ni_rsnprotos & IEEE80211_PROTO_RSN)) frm = ieee80211_add_rsn(frm, ic, ic->ic_bss); if (ic->ic_flags & IEEE80211_F_QOS) frm = ieee80211_add_edca_params(frm, ic); if ((ic->ic_flags & IEEE80211_F_RSNON) && (ic->ic_bss->ni_rsnprotos & IEEE80211_PROTO_WPA)) frm = ieee80211_add_wpa(frm, ic, ic->ic_bss); m->m_pkthdr.len = m->m_len = frm - mtod(m, u_int8_t *); return m; } #endif /* IEEE80211_STA_ONLY */ /*- * Authentication frame format: * [2] Authentication algorithm number * [2] Authentication transaction sequence number * [2] Status code */ struct mbuf * ieee80211_get_auth(struct ieee80211com *ic, struct ieee80211_node *ni, u_int16_t status, u_int16_t seq) { struct mbuf *m; u_int8_t *frm; MGETHDR(m, M_DONTWAIT, MT_DATA); if (m == NULL) return NULL; MH_ALIGN(m, 2 * 3); m->m_pkthdr.len = m->m_len = 2 * 3; frm = mtod(m, u_int8_t *); LE_WRITE_2(frm, IEEE80211_AUTH_ALG_OPEN); frm += 2; LE_WRITE_2(frm, seq); frm += 2; LE_WRITE_2(frm, status); return m; } /*- * Deauthentication frame format: * [2] Reason code */ struct mbuf * ieee80211_get_deauth(struct ieee80211com *ic, struct ieee80211_node *ni, u_int16_t reason) { struct mbuf *m; MGETHDR(m, M_DONTWAIT, MT_DATA); if (m == NULL) return NULL; MH_ALIGN(m, 2); m->m_pkthdr.len = m->m_len = 2; *mtod(m, u_int16_t *) = htole16(reason); return m; } /*- * (Re)Association request frame format: * [2] Capability information * [2] Listen interval * [6*] Current AP address (Reassociation only) * [tlv] SSID * [tlv] Supported rates * [tlv] Extended Supported Rates (802.11g) * [tlv] RSN (802.11i) * [tlv] QoS Capability (802.11e) */ struct mbuf * ieee80211_get_assoc_req(struct ieee80211com *ic, struct ieee80211_node *ni, int type) { const struct ieee80211_rateset *rs = &ni->ni_rates; struct mbuf *m; u_int8_t *frm; u_int16_t capinfo; m = ieee80211_getmgmt(M_DONTWAIT, MT_DATA, 2 + 2 + ((type == IEEE80211_FC0_SUBTYPE_REASSOC_REQ) ? IEEE80211_ADDR_LEN : 0) + 2 + ni->ni_esslen + 2 + min(rs->rs_nrates, IEEE80211_RATE_SIZE) + ((rs->rs_nrates > IEEE80211_RATE_SIZE) ? 2 + rs->rs_nrates - IEEE80211_RATE_SIZE : 0) + (((ic->ic_flags & IEEE80211_F_RSNON) && (ni->ni_rsnprotos & IEEE80211_PROTO_RSN)) ? 2 + IEEE80211_RSNIE_MAXLEN : 0) + ((ic->ic_flags & IEEE80211_F_QOS) ? 2 + 1 : 0) + (((ic->ic_flags & IEEE80211_F_RSNON) && (ni->ni_rsnprotos & IEEE80211_PROTO_WPA)) ? 2 + IEEE80211_WPAIE_MAXLEN : 0)); if (m == NULL) return NULL; frm = mtod(m, u_int8_t *); capinfo = IEEE80211_CAPINFO_ESS; if (ic->ic_flags & IEEE80211_F_WEPON) capinfo |= IEEE80211_CAPINFO_PRIVACY; if ((ic->ic_flags & IEEE80211_F_SHPREAMBLE) && IEEE80211_IS_CHAN_2GHZ(ni->ni_chan)) capinfo |= IEEE80211_CAPINFO_SHORT_PREAMBLE; if ((ni->ni_capinfo & IEEE80211_CAPINFO_SHORT_SLOTTIME) && (ic->ic_flags & IEEE80211_F_SHSLOT)) capinfo |= IEEE80211_CAPINFO_SHORT_SLOTTIME; LE_WRITE_2(frm, capinfo); frm += 2; LE_WRITE_2(frm, ic->ic_lintval); frm += 2; if (type == IEEE80211_FC0_SUBTYPE_REASSOC_REQ) { IEEE80211_ADDR_COPY(frm, ic->ic_bss->ni_bssid); frm += IEEE80211_ADDR_LEN; } frm = ieee80211_add_ssid(frm, ni->ni_essid, ni->ni_esslen); frm = ieee80211_add_rates(frm, rs); if (rs->rs_nrates > IEEE80211_RATE_SIZE) frm = ieee80211_add_xrates(frm, rs); if ((ic->ic_flags & IEEE80211_F_RSNON) && (ni->ni_rsnprotos & IEEE80211_PROTO_RSN)) frm = ieee80211_add_rsn(frm, ic, ni); if ((ic->ic_flags & IEEE80211_F_QOS) && (ni->ni_flags & IEEE80211_NODE_QOS)) frm = ieee80211_add_qos_capability(frm, ic); if ((ic->ic_flags & IEEE80211_F_RSNON) && (ni->ni_rsnprotos & IEEE80211_PROTO_WPA)) frm = ieee80211_add_wpa(frm, ic, ni); m->m_pkthdr.len = m->m_len = frm - mtod(m, u_int8_t *); return m; } #ifndef IEEE80211_STA_ONLY /*- * (Re)Association response frame format: * [2] Capability information * [2] Status code * [2] Association ID (AID) * [tlv] Supported rates * [tlv] Extended Supported Rates (802.11g) * [tlv] EDCA Parameter Set (802.11e) */ struct mbuf * ieee80211_get_assoc_resp(struct ieee80211com *ic, struct ieee80211_node *ni, u_int16_t status) { const struct ieee80211_rateset *rs = &ni->ni_rates; struct mbuf *m; u_int8_t *frm; m = ieee80211_getmgmt(M_DONTWAIT, MT_DATA, 2 + 2 + 2 + 2 + min(rs->rs_nrates, IEEE80211_RATE_SIZE) + ((rs->rs_nrates > IEEE80211_RATE_SIZE) ? 2 + rs->rs_nrates - IEEE80211_RATE_SIZE : 0) + ((ic->ic_flags & IEEE80211_F_QOS) ? 2 + 18 : 0)); if (m == NULL) return NULL; frm = mtod(m, u_int8_t *); frm = ieee80211_add_capinfo(frm, ic, ni); LE_WRITE_2(frm, status); frm += 2; if (status == IEEE80211_STATUS_SUCCESS) LE_WRITE_2(frm, ni->ni_associd); else LE_WRITE_2(frm, 0); frm += 2; frm = ieee80211_add_rates(frm, rs); if (rs->rs_nrates > IEEE80211_RATE_SIZE) frm = ieee80211_add_xrates(frm, rs); if ((ic->ic_flags & IEEE80211_F_QOS) && (ni->ni_flags & IEEE80211_NODE_QOS)) frm = ieee80211_add_edca_params(frm, ic); m->m_pkthdr.len = m->m_len = frm - mtod(m, u_int8_t *); return m; } #endif /* IEEE80211_STA_ONLY */ /*- * Disassociation frame format: * [2] Reason code */ struct mbuf * ieee80211_get_disassoc(struct ieee80211com *ic, struct ieee80211_node *ni, u_int16_t reason) { struct mbuf *m; MGETHDR(m, M_DONTWAIT, MT_DATA); if (m == NULL) return NULL; MH_ALIGN(m, 2); m->m_pkthdr.len = m->m_len = 2; *mtod(m, u_int16_t *) = htole16(reason); return m; } /* * Send a management frame. The node is for the destination (or ic_bss * when in station mode). Nodes other than ic_bss have their reference * count bumped to reflect our use for an indeterminant time. */ int ieee80211_send_mgmt(struct ieee80211com *ic, struct ieee80211_node *ni, int type, int arg) { #define senderr(_x, _v) do { ic->ic_stats._v++; ret = _x; goto bad; } while (0) struct ifnet *ifp = &ic->ic_if; struct mbuf *m; int ret, timer; if (ni == NULL) panic("null node"); /* * Hold a reference on the node so it doesn't go away until after * the xmit is complete all the way in the driver. On error we * will remove our reference. */ ieee80211_ref_node(ni); timer = 0; switch (type) { case IEEE80211_FC0_SUBTYPE_PROBE_REQ: if ((m = ieee80211_get_probe_req(ic, ni)) == NULL) senderr(ENOMEM, is_tx_nombuf); timer = IEEE80211_TRANS_WAIT; break; #ifndef IEEE80211_STA_ONLY case IEEE80211_FC0_SUBTYPE_PROBE_RESP: if ((m = ieee80211_get_probe_resp(ic, ni)) == NULL) senderr(ENOMEM, is_tx_nombuf); break; #endif case IEEE80211_FC0_SUBTYPE_AUTH: m = ieee80211_get_auth(ic, ni, arg >> 16, arg & 0xffff); if (m == NULL) senderr(ENOMEM, is_tx_nombuf); if (ic->ic_opmode == IEEE80211_M_STA) timer = IEEE80211_TRANS_WAIT; break; case IEEE80211_FC0_SUBTYPE_DEAUTH: if ((m = ieee80211_get_deauth(ic, ni, arg)) == NULL) senderr(ENOMEM, is_tx_nombuf); if (ifp->if_flags & IFF_DEBUG) { printf("%s: station %s deauthenticate (reason %d)\n", ifp->if_xname, ether_sprintf(ni->ni_macaddr), arg); } break; case IEEE80211_FC0_SUBTYPE_ASSOC_REQ: case IEEE80211_FC0_SUBTYPE_REASSOC_REQ: if ((m = ieee80211_get_assoc_req(ic, ni, type)) == NULL) senderr(ENOMEM, is_tx_nombuf); timer = IEEE80211_TRANS_WAIT; break; #ifndef IEEE80211_STA_ONLY case IEEE80211_FC0_SUBTYPE_ASSOC_RESP: case IEEE80211_FC0_SUBTYPE_REASSOC_RESP: if ((m = ieee80211_get_assoc_resp(ic, ni, arg)) == NULL) senderr(ENOMEM, is_tx_nombuf); break; #endif case IEEE80211_FC0_SUBTYPE_DISASSOC: if ((m = ieee80211_get_disassoc(ic, ni, arg)) == NULL) senderr(ENOMEM, is_tx_nombuf); if (ifp->if_flags & IFF_DEBUG) { printf("%s: station %s disassociate (reason %d)\n", ifp->if_xname, ether_sprintf(ni->ni_macaddr), arg); } break; default: DPRINTF(("invalid mgmt frame type %u\n", type)); senderr(EINVAL, is_tx_unknownmgt); /* NOTREACHED */ } ret = ieee80211_mgmt_output(ifp, ni, m, type); if (ret == 0) { if (timer) ic->ic_mgt_timer = timer; } else { bad: ieee80211_release_node(ic, ni); } return ret; #undef senderr } /* * Build a RTS (Request To Send) control frame (see 7.2.1.1). */ struct mbuf * ieee80211_get_rts(struct ieee80211com *ic, const struct ieee80211_frame *wh, u_int16_t dur) { struct ieee80211_frame_rts *rts; struct mbuf *m; MGETHDR(m, M_DONTWAIT, MT_DATA); if (m == NULL) return NULL; m->m_pkthdr.len = m->m_len = sizeof(struct ieee80211_frame_rts); rts = mtod(m, struct ieee80211_frame_rts *); rts->i_fc[0] = IEEE80211_FC0_VERSION_0 | IEEE80211_FC0_TYPE_CTL | IEEE80211_FC0_SUBTYPE_RTS; rts->i_fc[1] = IEEE80211_FC1_DIR_NODS; *(u_int16_t *)rts->i_dur = htole16(dur); IEEE80211_ADDR_COPY(rts->i_ra, wh->i_addr1); IEEE80211_ADDR_COPY(rts->i_ta, wh->i_addr2); return m; } /* * Build a CTS-to-self (Clear To Send) control frame (see 7.2.1.2). */ struct mbuf * ieee80211_get_cts_to_self(struct ieee80211com *ic, u_int16_t dur) { struct ieee80211_frame_cts *cts; struct mbuf *m; MGETHDR(m, M_DONTWAIT, MT_DATA); if (m == NULL) return NULL; m->m_pkthdr.len = m->m_len = sizeof(struct ieee80211_frame_cts); cts = mtod(m, struct ieee80211_frame_cts *); cts->i_fc[0] = IEEE80211_FC0_VERSION_0 | IEEE80211_FC0_TYPE_CTL | IEEE80211_FC0_SUBTYPE_CTS; cts->i_fc[1] = IEEE80211_FC1_DIR_NODS; *(u_int16_t *)cts->i_dur = htole16(dur); IEEE80211_ADDR_COPY(cts->i_ra, ic->ic_myaddr); return m; } #ifndef IEEE80211_STA_ONLY /*- * Beacon frame format: * [8] Timestamp * [2] Beacon interval * [2] Capability * [tlv] Service Set Identifier (SSID) * [tlv] Supported rates * [tlv*] DS Parameter Set (802.11g) * [tlv*] IBSS Parameter Set * [tlv] Traffic Indication Map (TIM) * [tlv] ERP Information (802.11g) * [tlv] Extended Supported Rates (802.11g) * [tlv] RSN (802.11i) * [tlv] EDCA Parameter Set (802.11e) */ struct mbuf * ieee80211_beacon_alloc(struct ieee80211com *ic, struct ieee80211_node *ni) { const struct ieee80211_rateset *rs = &ni->ni_rates; struct ieee80211_frame *wh; struct mbuf *m; u_int8_t *frm; m = ieee80211_getmgmt(M_DONTWAIT, MT_DATA, 8 + 2 + 2 + 2 + ((ic->ic_flags & IEEE80211_F_HIDENWID) ? 0 : ni->ni_esslen) + 2 + min(rs->rs_nrates, IEEE80211_RATE_SIZE) + 2 + 1 + 2 + ((ic->ic_opmode == IEEE80211_M_IBSS) ? 2 : 254) + ((ic->ic_curmode == IEEE80211_MODE_11G) ? 2 + 1 : 0) + ((rs->rs_nrates > IEEE80211_RATE_SIZE) ? 2 + rs->rs_nrates - IEEE80211_RATE_SIZE : 0) + (((ic->ic_flags & IEEE80211_F_RSNON) && (ni->ni_rsnprotos & IEEE80211_PROTO_RSN)) ? 2 + IEEE80211_RSNIE_MAXLEN : 0) + ((ic->ic_flags & IEEE80211_F_QOS) ? 2 + 18 : 0) + (((ic->ic_flags & IEEE80211_F_RSNON) && (ni->ni_rsnprotos & IEEE80211_PROTO_WPA)) ? 2 + IEEE80211_WPAIE_MAXLEN : 0)); if (m == NULL) return NULL; M_PREPEND(m, sizeof(struct ieee80211_frame), M_DONTWAIT); if (m == NULL) return NULL; wh = mtod(m, struct ieee80211_frame *); wh->i_fc[0] = IEEE80211_FC0_VERSION_0 | IEEE80211_FC0_TYPE_MGT | IEEE80211_FC0_SUBTYPE_BEACON; wh->i_fc[1] = IEEE80211_FC1_DIR_NODS; *(u_int16_t *)wh->i_dur = 0; IEEE80211_ADDR_COPY(wh->i_addr1, etherbroadcastaddr); IEEE80211_ADDR_COPY(wh->i_addr2, ic->ic_myaddr); IEEE80211_ADDR_COPY(wh->i_addr3, ni->ni_bssid); *(u_int16_t *)wh->i_seq = 0; frm = (u_int8_t *)&wh[1]; memset(frm, 0, 8); frm += 8; /* timestamp is set by hardware */ LE_WRITE_2(frm, ni->ni_intval); frm += 2; frm = ieee80211_add_capinfo(frm, ic, ni); if (ic->ic_flags & IEEE80211_F_HIDENWID) frm = ieee80211_add_ssid(frm, NULL, 0); else frm = ieee80211_add_ssid(frm, ni->ni_essid, ni->ni_esslen); frm = ieee80211_add_rates(frm, rs); frm = ieee80211_add_ds_params(frm, ic, ni); if (ic->ic_opmode == IEEE80211_M_IBSS) frm = ieee80211_add_ibss_params(frm, ni); else frm = ieee80211_add_tim(frm, ic); if (ic->ic_curmode == IEEE80211_MODE_11G) frm = ieee80211_add_erp(frm, ic); if (rs->rs_nrates > IEEE80211_RATE_SIZE) frm = ieee80211_add_xrates(frm, rs); if ((ic->ic_flags & IEEE80211_F_RSNON) && (ni->ni_rsnprotos & IEEE80211_PROTO_RSN)) frm = ieee80211_add_rsn(frm, ic, ni); if (ic->ic_flags & IEEE80211_F_QOS) frm = ieee80211_add_edca_params(frm, ic); if ((ic->ic_flags & IEEE80211_F_RSNON) && (ni->ni_rsnprotos & IEEE80211_PROTO_WPA)) frm = ieee80211_add_wpa(frm, ic, ni); m->m_pkthdr.len = m->m_len = frm - mtod(m, u_int8_t *); m->m_pkthdr.rcvif = (void *)ni; return m; } /* * Check if an outgoing MSDU or management frame should be buffered into * the AP for power management. Return 1 if the frame was buffered into * the AP, or 0 if the frame shall be transmitted immediately. */ int ieee80211_pwrsave(struct ieee80211com *ic, struct mbuf *m, struct ieee80211_node *ni) { const struct ieee80211_frame *wh; KASSERT(ic->ic_opmode == IEEE80211_M_HOSTAP); if (!(ic->ic_caps & IEEE80211_C_APPMGT)) return 0; wh = mtod(m, struct ieee80211_frame *); if (IEEE80211_IS_MULTICAST(wh->i_addr1)) { /* * Buffer group addressed MSDUs with the Order bit clear * if any associated STAs are in PS mode. */ if ((wh->i_fc[1] & IEEE80211_FC1_ORDER) || ic->ic_pssta == 0) return 0; ic->ic_tim_mcast_pending = 1; } else { /* * Buffer MSDUs, A-MSDUs or management frames destined for * PS STAs. */ if (ni->ni_pwrsave == IEEE80211_PS_AWAKE || (wh->i_fc[0] & IEEE80211_FC0_TYPE_MASK) == IEEE80211_FC0_TYPE_CTL) return 0; if (IF_IS_EMPTY(&ni->ni_savedq)) (*ic->ic_set_tim)(ic, ni->ni_associd, 1); } /* NB: ni == ic->ic_bss for broadcast/multicast */ if (IF_QFULL(&ni->ni_savedq)) { /* XXX should we drop the oldest instead? */ IF_DROP(&ni->ni_savedq); m_freem(m); } else { IF_ENQUEUE(&ni->ni_savedq, m); /* * Similar to ieee80211_mgmt_output, store the node in the * rcvif field. */ m->m_pkthdr.rcvif = (void *)ni; } return 1; } #endif /* IEEE80211_STA_ONLY */