/* $OpenBSD: ieee80211_var.h,v 1.6 2005/02/17 18:28:05 reyk Exp $ */ /* $NetBSD: ieee80211_var.h,v 1.7 2004/05/06 03:07:10 dyoung Exp $ */ /*- * Copyright (c) 2001 Atsushi Onoe * Copyright (c) 2002, 2003 Sam Leffler, Errno Consulting * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * Alternatively, this software may be distributed under the terms of the * GNU General Public License ("GPL") version 2 as published by the Free * Software Foundation. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * * $FreeBSD: src/sys/net80211/ieee80211_var.h,v 1.15 2004/04/05 22:10:26 sam Exp $ */ #ifndef _NET80211_IEEE80211_VAR_H_ #define _NET80211_IEEE80211_VAR_H_ /* * Definitions for IEEE 802.11 drivers. */ #include #include #include /* for ieee80211_stats */ #include #include #define IEEE80211_CHAN_MAX 255 #define IEEE80211_CHAN_ANY 0xffff /* token for ``any channel'' */ #define IEEE80211_CHAN_ANYC \ ((struct ieee80211_channel *) IEEE80211_CHAN_ANY) #define IEEE80211_TXPOWER_MAX 100 /* max power */ #define IEEE80211_TXPOWER_MIN -50 /* kill radio (if possible) */ enum ieee80211_phytype { IEEE80211_T_DS, /* direct sequence spread spectrum */ IEEE80211_T_FH, /* frequency hopping */ IEEE80211_T_OFDM, /* frequency division multiplexing */ IEEE80211_T_TURBO, /* high rate OFDM, aka turbo mode */ IEEE80211_T_XR /* extended range mode */ }; #define IEEE80211_T_CCK IEEE80211_T_DS /* more common nomenclature */ /* XXX not really a mode; there are really multiple PHY's */ enum ieee80211_phymode { IEEE80211_MODE_AUTO = 0, /* autoselect */ IEEE80211_MODE_11A = 1, /* 5GHz, OFDM */ IEEE80211_MODE_11B = 2, /* 2GHz, CCK */ IEEE80211_MODE_11G = 3, /* 2GHz, OFDM */ IEEE80211_MODE_FH = 4, /* 2GHz, GFSK */ IEEE80211_MODE_TURBO = 5 /* 5GHz, OFDM, 2x clock */ }; #define IEEE80211_MODE_MAX (IEEE80211_MODE_TURBO+1) enum ieee80211_opmode { IEEE80211_M_STA = 1, /* infrastructure station */ IEEE80211_M_IBSS = 0, /* IBSS (adhoc) station */ IEEE80211_M_AHDEMO = 3, /* Old lucent compatible adhoc demo */ IEEE80211_M_HOSTAP = 6, /* Software Access Point */ IEEE80211_M_MONITOR = 8 /* Monitor mode */ }; /* * 802.11g protection mode. */ enum ieee80211_protmode { IEEE80211_PROT_NONE = 0, /* no protection */ IEEE80211_PROT_CTSONLY = 1, /* CTS to self */ IEEE80211_PROT_RTSCTS = 2 /* RTS-CTS */ }; /* * Channels are specified by frequency and attributes. */ struct ieee80211_channel { u_int16_t ic_freq; /* setting in Mhz */ u_int16_t ic_flags; /* see below */ }; /* bits 0-3 are for private use by drivers */ /* channel attributes */ #define IEEE80211_CHAN_TURBO 0x0010 /* Turbo channel */ #define IEEE80211_CHAN_CCK 0x0020 /* CCK channel */ #define IEEE80211_CHAN_OFDM 0x0040 /* OFDM channel */ #define IEEE80211_CHAN_2GHZ 0x0080 /* 2 GHz spectrum channel. */ #define IEEE80211_CHAN_5GHZ 0x0100 /* 5 GHz spectrum channel */ #define IEEE80211_CHAN_PASSIVE 0x0200 /* Only passive scan allowed */ #define IEEE80211_CHAN_DYN 0x0400 /* Dynamic CCK-OFDM channel */ #define IEEE80211_CHAN_GFSK 0x0800 /* GFSK channel (FHSS PHY) */ #define IEEE80211_CHAN_XR 0x1000 /* Extended range OFDM channel */ /* * Useful combinations of channel characteristics. */ #define IEEE80211_CHAN_FHSS \ (IEEE80211_CHAN_2GHZ | IEEE80211_CHAN_GFSK) #define IEEE80211_CHAN_A \ (IEEE80211_CHAN_5GHZ | IEEE80211_CHAN_OFDM) #define IEEE80211_CHAN_B \ (IEEE80211_CHAN_2GHZ | IEEE80211_CHAN_CCK) #define IEEE80211_CHAN_PUREG \ (IEEE80211_CHAN_2GHZ | IEEE80211_CHAN_OFDM) #define IEEE80211_CHAN_G \ (IEEE80211_CHAN_2GHZ | IEEE80211_CHAN_DYN) #define IEEE80211_CHAN_T \ (IEEE80211_CHAN_5GHZ | IEEE80211_CHAN_OFDM | IEEE80211_CHAN_TURBO) #define IEEE80211_CHAN_TG \ (IEEE80211_CHAN_2GHZ | IEEE80211_CHAN_OFDM | IEEE80211_CHAN_TURBO) #define IEEE80211_IS_CHAN_FHSS(_c) \ (((_c)->ic_flags & IEEE80211_CHAN_FHSS) == IEEE80211_CHAN_FHSS) #define IEEE80211_IS_CHAN_A(_c) \ (((_c)->ic_flags & IEEE80211_CHAN_A) == IEEE80211_CHAN_A) #define IEEE80211_IS_CHAN_B(_c) \ (((_c)->ic_flags & IEEE80211_CHAN_B) == IEEE80211_CHAN_B) #define IEEE80211_IS_CHAN_PUREG(_c) \ (((_c)->ic_flags & IEEE80211_CHAN_PUREG) == IEEE80211_CHAN_PUREG) #define IEEE80211_IS_CHAN_G(_c) \ (((_c)->ic_flags & IEEE80211_CHAN_G) == IEEE80211_CHAN_G) #define IEEE80211_IS_CHAN_T(_c) \ (((_c)->ic_flags & IEEE80211_CHAN_T) == IEEE80211_CHAN_T) #define IEEE80211_IS_CHAN_TG(_c) \ (((_c)->ic_flags & IEEE80211_CHAN_TG) == IEEE80211_CHAN_TG) #define IEEE80211_IS_CHAN_2GHZ(_c) \ (((_c)->ic_flags & IEEE80211_CHAN_2GHZ) != 0) #define IEEE80211_IS_CHAN_5GHZ(_c) \ (((_c)->ic_flags & IEEE80211_CHAN_5GHZ) != 0) #define IEEE80211_IS_CHAN_OFDM(_c) \ (((_c)->ic_flags & IEEE80211_CHAN_OFDM) != 0) #define IEEE80211_IS_CHAN_CCK(_c) \ (((_c)->ic_flags & IEEE80211_CHAN_CCK) != 0) #define IEEE80211_IS_CHAN_GFSK(_c) \ (((_c)->ic_flags & IEEE80211_CHAN_GFSK) != 0) #define IEEE80211_IS_CHAN_XR(_c) \ (((_c)->ic_flags & IEEE80211_CHAN_XR) != 0) /* ni_chan encoding for FH phy */ #define IEEE80211_FH_CHANMOD 80 #define IEEE80211_FH_CHAN(set,pat) (((set)-1)*IEEE80211_FH_CHANMOD+(pat)) #define IEEE80211_FH_CHANSET(chan) ((chan)/IEEE80211_FH_CHANMOD+1) #define IEEE80211_FH_CHANPAT(chan) ((chan)%IEEE80211_FH_CHANMOD) #define IEEE80211_PS_SLEEP 0x1 /* STA is in power saving mode */ #define IEEE80211_PS_MAX_QUEUE 50 /* maximum saved packets */ struct ieee80211com { #ifdef __NetBSD__ struct ethercom ic_ec; #else struct arpcom ic_ac; #endif LIST_ENTRY(ieee80211com) ic_list; /* chain of all ieee80211com */ void (*ic_recv_mgmt)(struct ieee80211com *, struct mbuf *, struct ieee80211_node *, int, int, u_int32_t); int (*ic_send_mgmt)(struct ieee80211com *, struct ieee80211_node *, int, int); int (*ic_newstate)(struct ieee80211com *, enum ieee80211_state, int); void (*ic_newassoc)(struct ieee80211com *, struct ieee80211_node *, int); int (*ic_set_tim)(struct ieee80211com *, int, int); u_int8_t ic_myaddr[IEEE80211_ADDR_LEN]; struct ieee80211_rateset ic_sup_rates[IEEE80211_MODE_MAX]; struct ieee80211_channel ic_channels[IEEE80211_CHAN_MAX+1]; u_char ic_chan_avail[roundup(IEEE80211_CHAN_MAX,NBBY)]; u_char ic_chan_active[roundup(IEEE80211_CHAN_MAX, NBBY)]; u_char ic_chan_scan[roundup(IEEE80211_CHAN_MAX,NBBY)]; struct ifqueue ic_mgtq; struct ifqueue ic_pwrsaveq; u_int32_t ic_flags; /* state flags */ u_int32_t ic_caps; /* capabilities */ u_int16_t ic_modecaps; /* set of mode capabilities */ u_int16_t ic_curmode; /* current mode */ enum ieee80211_phytype ic_phytype; /* XXX wrong for multi-mode */ enum ieee80211_opmode ic_opmode; /* operation mode */ enum ieee80211_state ic_state; /* 802.11 state */ u_int32_t *ic_aid_bitmap; u_int16_t ic_max_aid; enum ieee80211_protmode ic_protmode; /* 802.11g protection mode */ struct ifmedia ic_media; /* interface media config */ #ifdef __FreeBSD__ struct bpf_if *ic_rawbpf; /* packet filter structure */ #else caddr_t ic_rawbpf; /* packet filter structure */ #endif struct ieee80211_node *ic_bss; /* information for this node */ struct ieee80211_channel *ic_ibss_chan; int ic_fixed_rate; /* index to ic_sup_rates[] */ u_int16_t ic_rtsthreshold; u_int16_t ic_fragthreshold; ieee80211_node_lock_t ic_nodelock; /* on node table */ u_int ic_scangen; /* gen# for timeout scan */ struct ieee80211_node *(*ic_node_alloc)(struct ieee80211com *); void (*ic_node_free)(struct ieee80211com *, struct ieee80211_node *); void (*ic_node_copy)(struct ieee80211com *, struct ieee80211_node *, const struct ieee80211_node *); u_int8_t (*ic_node_getrssi)(struct ieee80211com *, struct ieee80211_node *); TAILQ_HEAD(, ieee80211_node) ic_node; /* information of all nodes * LRU at tail */ int ic_nnodes; /* length of ic_nnodes */ int ic_max_nnodes; /* max length of ic_nnodes */ LIST_HEAD(, ieee80211_node) ic_hash[IEEE80211_NODE_HASHSIZE]; u_int16_t ic_lintval; /* listen interval */ u_int16_t ic_holdover; /* PM hold over duration */ u_int16_t ic_txmin; /* min tx retry count */ u_int16_t ic_txmax; /* max tx retry count */ u_int16_t ic_txlifetime; /* tx lifetime */ int16_t ic_txpower; /* tx power setting (dBm) */ u_int16_t ic_bmisstimeout;/* beacon miss threshold (ms) */ int ic_mgt_timer; /* mgmt timeout */ int ic_inact_timer; /* inactivity timer wait */ int ic_des_esslen; u_int8_t ic_des_essid[IEEE80211_NWID_LEN]; struct ieee80211_channel *ic_des_chan; /* desired channel */ u_int8_t ic_des_bssid[IEEE80211_ADDR_LEN]; struct ieee80211_wepkey ic_nw_keys[IEEE80211_WEP_NKID]; int ic_wep_txkey; /* default tx key index */ void *ic_wep_ctx; /* wep crypt context */ u_int32_t ic_iv; /* initial vector for wep */ struct ieee80211_stats ic_stats; /* statistics */ struct timeval ic_last_merge_print; /* for rate-limiting * IBSS merge print-outs */ }; #ifdef __NetBSD__ #define ic_if ic_ec.ec_if #else #define ic_if ic_ac.ac_if #endif #define ic_softc ic_if.if_softc LIST_HEAD(ieee80211com_head, ieee80211com); extern struct ieee80211com_head ieee80211com_head; #define IEEE80211_ADDR_EQ(a1,a2) (memcmp(a1,a2,IEEE80211_ADDR_LEN) == 0) #define IEEE80211_ADDR_COPY(dst,src) memcpy(dst,src,IEEE80211_ADDR_LEN) /* ic_flags */ #define IEEE80211_F_ASCAN 0x00000001 /* STATUS: active scan */ #define IEEE80211_F_SIBSS 0x00000002 /* STATUS: start IBSS */ #define IEEE80211_F_WEPON 0x00000100 /* CONF: WEP enabled */ #define IEEE80211_F_IBSSON 0x00000200 /* CONF: IBSS creation enable */ #define IEEE80211_F_PMGTON 0x00000400 /* CONF: Power mgmt enable */ #define IEEE80211_F_DESBSSID 0x00000800 /* CONF: des_bssid is set */ #define IEEE80211_F_SCANAP 0x00001000 /* CONF: Scanning AP */ #define IEEE80211_F_ROAMING 0x00002000 /* CONF: roaming enabled */ #define IEEE80211_F_SWRETRY 0x00004000 /* CONF: sw tx retry enabled */ #define IEEE80211_F_TXPMGT 0x00018000 /* STATUS: tx power */ #define IEEE80211_F_TXPOW_OFF 0x00000000 /* TX Power: radio disabled */ #define IEEE80211_F_TXPOW_FIXED 0x00008000 /* TX Power: fixed rate */ #define IEEE80211_F_TXPOW_AUTO 0x00010000 /* TX Power: undefined */ #define IEEE80211_F_SHSLOT 0x00020000 /* CONF: short slot time */ #define IEEE80211_F_SHPREAMBLE 0x00040000 /* CONF: short preamble */ #define IEEE80211_F_USEPROT 0x00100000 /* STATUS: protection enabled */ #define IEEE80211_F_USEBARKER 0x00200000 /* STATUS: use barker preamble*/ /* ic_caps */ #define IEEE80211_C_WEP 0x00000001 /* CAPABILITY: WEP available */ #define IEEE80211_C_IBSS 0x00000002 /* CAPABILITY: IBSS available */ #define IEEE80211_C_PMGT 0x00000004 /* CAPABILITY: Power mgmt */ #define IEEE80211_C_HOSTAP 0x00000008 /* CAPABILITY: HOSTAP avail */ #define IEEE80211_C_AHDEMO 0x00000010 /* CAPABILITY: Old Adhoc Demo */ #define IEEE80211_C_SWRETRY 0x00000020 /* CAPABILITY: sw tx retry */ #define IEEE80211_C_TXPMGT 0x00000040 /* CAPABILITY: tx power mgmt */ #define IEEE80211_C_SHSLOT 0x00000080 /* CAPABILITY: short slottime */ #define IEEE80211_C_SHPREAMBLE 0x00000100 /* CAPABILITY: short preamble */ #define IEEE80211_C_MONITOR 0x00000200 /* CAPABILITY: monitor mode */ #define IEEE80211_C_SCANALL 0x00000400 /* CAPABILITY: scan all chan */ /* flags for ieee80211_fix_rate() */ #define IEEE80211_F_DOSORT 0x00000001 /* sort rate list */ #define IEEE80211_F_DOFRATE 0x00000002 /* use fixed rate */ #define IEEE80211_F_DONEGO 0x00000004 /* calc negotiated rate */ #define IEEE80211_F_DODEL 0x00000008 /* delete ignore rate */ void ieee80211_ifattach(struct ifnet *); void ieee80211_ifdetach(struct ifnet *); void ieee80211_media_init(struct ifnet *, ifm_change_cb_t, ifm_stat_cb_t); int ieee80211_media_change(struct ifnet *); void ieee80211_media_status(struct ifnet *, struct ifmediareq *); int ieee80211_ioctl(struct ifnet *, u_long, caddr_t); int ieee80211_get_rate(struct ieee80211com *); int ieee80211_cfgget(struct ifnet *, u_long, caddr_t); int ieee80211_cfgset(struct ifnet *, u_long, caddr_t); void ieee80211_watchdog(struct ifnet *); int ieee80211_fix_rate(struct ieee80211com *, struct ieee80211_node *, int); int ieee80211_rate2media(struct ieee80211com *, int, enum ieee80211_phymode); int ieee80211_media2rate(int); u_int ieee80211_mhz2ieee(u_int, u_int); u_int ieee80211_chan2ieee(struct ieee80211com *, struct ieee80211_channel *); u_int ieee80211_ieee2mhz(u_int, u_int); int ieee80211_setmode(struct ieee80211com *, enum ieee80211_phymode); enum ieee80211_phymode ieee80211_chan2mode(struct ieee80211com *, struct ieee80211_channel *); #ifdef IEEE80211_DEBUG extern int ieee80211_debug; #define IEEE80211_DPRINTF(X) if (ieee80211_debug) printf X #define IEEE80211_DPRINTF2(X) if (ieee80211_debug>1) printf X #else #define IEEE80211_DPRINTF(X) #define IEEE80211_DPRINTF2(X) #endif extern int ieee80211_cache_size; #endif /* _NET80211_IEEE80211_VAR_H_ */