/* $OpenBSD: rfcomm.h,v 1.1 2007/06/01 02:46:11 uwe Exp $ */ /* $NetBSD: rfcomm.h,v 1.3 2007/04/21 06:15:23 plunky Exp $ */ /*- * Copyright (c) 2006 Itronix Inc. * All rights reserved. * * Written by Iain Hibbert for Itronix Inc. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. The name of Itronix Inc. may not be used to endorse * or promote products derived from this software without specific * prior written permission. * * THIS SOFTWARE IS PROVIDED BY ITRONIX INC. ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL ITRONIX INC. BE LIABLE FOR ANY * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND * ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. */ /*- * Copyright (c) 2001-2003 Maksim Yevmenkin * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * $Id: rfcomm.h,v 1.1 2007/06/01 02:46:11 uwe Exp $ * $FreeBSD: src/sys/netgraph/bluetooth/include/ng_btsocket_rfcomm.h,v 1.4 2005/01/11 01:39:53 emax Exp $ */ #ifndef _NETBT_RFCOMM_H_ #define _NETBT_RFCOMM_H_ #include /************************************************************************* ************************************************************************* ** RFCOMM ** ************************************************************************* *************************************************************************/ #define RFCOMM_MTU_MAX 32767 #define RFCOMM_MTU_MIN 23 #define RFCOMM_MTU_DEFAULT 127 #define RFCOMM_CREDITS_MAX 255 /* in any single packet */ #define RFCOMM_CREDITS_DEFAULT 7 /* default initial value */ #define RFCOMM_CHANNEL_MIN 1 #define RFCOMM_CHANNEL_MAX 30 /* RFCOMM frame types */ #define RFCOMM_FRAME_SABM 0x2f #define RFCOMM_FRAME_DISC 0x43 #define RFCOMM_FRAME_UA 0x63 #define RFCOMM_FRAME_DM 0x0f #define RFCOMM_FRAME_UIH 0xef /* RFCOMM MCC commands */ #define RFCOMM_MCC_TEST 0x08 /* Test */ #define RFCOMM_MCC_FCON 0x28 /* Flow Control on */ #define RFCOMM_MCC_FCOFF 0x18 /* Flow Control off */ #define RFCOMM_MCC_MSC 0x38 /* Modem Status Command */ #define RFCOMM_MCC_RPN 0x24 /* Remote Port Negotiation */ #define RFCOMM_MCC_RLS 0x14 /* Remote Line Status */ #define RFCOMM_MCC_PN 0x20 /* Port Negotiation */ #define RFCOMM_MCC_NSC 0x04 /* Non Supported Command */ /* RFCOMM modem signals */ #define RFCOMM_MSC_FC 0x02 /* Flow Control asserted */ #define RFCOMM_MSC_RTC 0x04 /* Ready To Communicate */ #define RFCOMM_MSC_RTR 0x08 /* Ready To Receive */ #define RFCOMM_MSC_IC 0x40 /* Incomming Call (RING) */ #define RFCOMM_MSC_DV 0x80 /* Data Valid */ /* RPN parameters - baud rate */ #define RFCOMM_RPN_BR_2400 0x0 #define RFCOMM_RPN_BR_4800 0x1 #define RFCOMM_RPN_BR_7200 0x2 #define RFCOMM_RPN_BR_9600 0x3 #define RFCOMM_RPN_BR_19200 0x4 #define RFCOMM_RPN_BR_38400 0x5 #define RFCOMM_RPN_BR_57600 0x6 #define RFCOMM_RPN_BR_115200 0x7 #define RFCOMM_RPN_BR_230400 0x8 /* RPN parameters - data bits */ #define RFCOMM_RPN_DATA_5 0x0 #define RFCOMM_RPN_DATA_6 0x1 #define RFCOMM_RPN_DATA_7 0x2 #define RFCOMM_RPN_DATA_8 0x3 /* RPN parameters - stop bit */ #define RFCOMM_RPN_STOP_1 0 #define RFCOMM_RPN_STOP_15 1 /* RPN parameters - parity enable */ #define RFCOMM_RPN_PARITY_NONE 0x0 /* RPN parameters - parity type */ #define RFCOMM_RPN_PARITY_ODD 0x0 #define RFCOMM_RPN_PARITY_EVEN 0x1 #define RFCOMM_RPN_PARITY_MARK 0x2 #define RFCOMM_RPN_PARITY_SPACE 0x3 /* RPN parameters - default line_setting */ #define RFCOMM_RPN_8_N_1 0x03 /* RPN parameters - flow control */ #define RFCOMM_RPN_XON_CHAR 0x11 #define RFCOMM_RPN_XOFF_CHAR 0x13 #define RFCOMM_RPN_FLOW_NONE 0x00 /* RPN parameters - mask */ #define RFCOMM_RPN_PM_RATE 0x0001 #define RFCOMM_RPN_PM_DATA 0x0002 #define RFCOMM_RPN_PM_STOP 0x0004 #define RFCOMM_RPN_PM_PARITY 0x0008 #define RFCOMM_RPN_PM_PTYPE 0x0010 #define RFCOMM_RPN_PM_XON 0x0020 #define RFCOMM_RPN_PM_XOFF 0x0040 #define RFCOMM_RPN_PM_FLOW 0x3f00 #define RFCOMM_RPN_PM_ALL 0x3f7f /* RFCOMM command frame header */ struct rfcomm_cmd_hdr { uint8_t address; uint8_t control; uint8_t length; uint8_t fcs; } __attribute__ ((__packed__)); /* RFCOMM MSC command */ struct rfcomm_mcc_msc { uint8_t address; uint8_t modem; uint8_t brk; } __attribute__ ((__packed__)); /* RFCOMM RPN command */ struct rfcomm_mcc_rpn { uint8_t dlci; uint8_t bit_rate; uint8_t line_settings; uint8_t flow_control; uint8_t xon_char; uint8_t xoff_char; uint16_t param_mask; } __attribute__ ((__packed__)); /* RFCOMM RLS command */ struct rfcomm_mcc_rls { uint8_t address; uint8_t status; } __attribute__ ((__packed__)); /* RFCOMM PN command */ struct rfcomm_mcc_pn { uint8_t dlci; uint8_t flow_control; uint8_t priority; uint8_t ack_timer; uint16_t mtu; uint8_t max_retrans; uint8_t credits; } __attribute__ ((__packed__)); /* RFCOMM frame parsing macros */ #define RFCOMM_DLCI(b) (((b) & 0xfc) >> 2) #define RFCOMM_TYPE(b) (((b) & 0xef)) #define RFCOMM_EA(b) (((b) & 0x01)) #define RFCOMM_CR(b) (((b) & 0x02) >> 1) #define RFCOMM_PF(b) (((b) & 0x10) >> 4) #define RFCOMM_CHANNEL(dlci) (((dlci) >> 1) & 0x2f) #define RFCOMM_DIRECTION(dlci) ((dlci) & 0x1) #define RFCOMM_MKADDRESS(cr, dlci) \ ((((dlci) & 0x3f) << 2) | ((cr) << 1) | 0x01) #define RFCOMM_MKCONTROL(type, pf) ((((type) & 0xef) | ((pf) << 4))) #define RFCOMM_MKDLCI(dir, channel) ((((channel) & 0x1f) << 1) | (dir)) /* RFCOMM MCC macros */ #define RFCOMM_MCC_TYPE(b) (((b) & 0xfc) >> 2) #define RFCOMM_MCC_LENGTH(b) (((b) & 0xfe) >> 1) #define RFCOMM_MKMCC_TYPE(cr, type) ((((type) << 2) | ((cr) << 1) | 0x01)) /* RPN macros */ #define RFCOMM_RPN_DATA_BITS(line) ((line) & 0x3) #define RFCOMM_RPN_STOP_BITS(line) (((line) >> 2) & 0x1) #define RFCOMM_RPN_PARITY(line) (((line) >> 3) & 0x1) /************************************************************************* ************************************************************************* ** SOCK_STREAM RFCOMM sockets ** ************************************************************************* *************************************************************************/ /* Socket options */ #define SO_RFCOMM_MTU 1 /* mtu */ #define SO_RFCOMM_FC_INFO 2 /* flow control info (below) */ #define SO_RFCOMM_LM 3 /* link mode */ /* Flow control information */ struct rfcomm_fc_info { uint8_t lmodem; /* modem signals (local) */ uint8_t rmodem; /* modem signals (remote) */ uint8_t tx_cred; /* TX credits */ uint8_t rx_cred; /* RX credits */ uint8_t cfc; /* credit flow control */ uint8_t reserved; }; /* RFCOMM link mode flags */ #define RFCOMM_LM_AUTH (1<<0) /* want authentication */ #define RFCOMM_LM_ENCRYPT (1<<1) /* want encryption */ #define RFCOMM_LM_SECURE (1<<2) /* want secured link */ #ifdef _KERNEL /* sysctl variables */ extern int rfcomm_sendspace; extern int rfcomm_recvspace; extern int rfcomm_mtu_default; extern int rfcomm_ack_timeout; extern int rfcomm_mcc_timeout; /* * Bluetooth RFCOMM session data * One L2CAP connection == one RFCOMM session */ /* Credit note */ struct rfcomm_credit { struct rfcomm_dlc *rc_dlc; /* owner */ uint16_t rc_len; /* length */ SIMPLEQ_ENTRY(rfcomm_credit) rc_next; /* next credit */ }; /* RFCOMM session data (one L2CAP channel) */ struct rfcomm_session { struct l2cap_channel *rs_l2cap; /* L2CAP pointer */ uint16_t rs_flags; /* session flags */ uint16_t rs_state; /* session state */ uint16_t rs_mtu; /* default MTU */ SIMPLEQ_HEAD(,rfcomm_credit) rs_credits; /* credit notes */ LIST_HEAD(,rfcomm_dlc) rs_dlcs; /* DLC list */ struct timeout rs_timeout; /* timeout */ LIST_ENTRY(rfcomm_session) rs_next; /* next session */ }; LIST_HEAD(rfcomm_session_list, rfcomm_session); extern struct rfcomm_session_list rfcomm_session_active; extern struct rfcomm_session_list rfcomm_session_listen; /* Session state */ #define RFCOMM_SESSION_CLOSED 0 #define RFCOMM_SESSION_WAIT_CONNECT 1 #define RFCOMM_SESSION_OPEN 2 #define RFCOMM_SESSION_WAIT_DISCONNECT 3 #define RFCOMM_SESSION_LISTEN 4 /* Session flags */ #define RFCOMM_SESSION_INITIATOR (1 << 0) /* we are initiator */ #define RFCOMM_SESSION_CFC (1 << 1) /* credit flow control */ #define RFCOMM_SESSION_LFC (1 << 2) /* local flow control */ #define RFCOMM_SESSION_RFC (1 << 3) /* remote flow control */ #define RFCOMM_SESSION_FREE (1 << 4) /* self lock out for free */ #define IS_INITIATOR(rs) ((rs)->rs_flags & RFCOMM_SESSION_INITIATOR) /* Bluetooth RFCOMM DLC data (connection) */ struct rfcomm_dlc { struct rfcomm_session *rd_session; /* RFCOMM session */ uint8_t rd_dlci; /* RFCOMM DLCI */ uint16_t rd_flags; /* DLC flags */ uint16_t rd_state; /* DLC state */ uint16_t rd_mtu; /* MTU */ int rd_mode; /* link mode */ struct sockaddr_bt rd_laddr; /* local address */ struct sockaddr_bt rd_raddr; /* remote address */ uint8_t rd_lmodem; /* local modem signls */ uint8_t rd_rmodem; /* remote modem signals */ int rd_rxcred; /* receive credits (sent) */ size_t rd_rxsize; /* receive buffer (bytes, avail) */ int rd_txcred; /* transmit credits (unused) */ int rd_pending; /* packets sent but not complete */ struct timeout rd_timeout; /* timeout */ struct mbuf *rd_txbuf; /* transmit buffer */ const struct btproto *rd_proto; /* upper layer callbacks */ void *rd_upper; /* upper layer argument */ LIST_ENTRY(rfcomm_dlc) rd_next; /* next dlc on session */ }; /* * Credit Flow Control works in the following way. * * txcred is how many packets we can send. Received credit * is added to this value, and it is decremented each time * we send a packet. * * rxsize is the number of bytes that are available in the * upstream receive buffer. * * rxcred is the number of credits that we have previously * sent that are still unused. This value will be decreased * for each packet we receive and we will add to it when we * send credits. We calculate the amount of credits to send * by the cunning formula "(space / mtu) - sent" so that if * we get a bunch of small packets, we can continue sending * credits without risking buffer overflow. */ /* DLC flags */ #define RFCOMM_DLC_DETACH (1 << 0) /* DLC to be detached */ #define RFCOMM_DLC_SHUTDOWN (1 << 1) /* DLC to be shutdown */ /* DLC state */ #define RFCOMM_DLC_CLOSED 0 /* no session */ #define RFCOMM_DLC_WAIT_SESSION 1 /* waiting for session */ #define RFCOMM_DLC_WAIT_CONNECT 2 /* waiting for connect */ #define RFCOMM_DLC_WAIT_SEND_SABM 3 /* waiting to send SABM */ #define RFCOMM_DLC_WAIT_SEND_UA 4 /* waiting to send UA */ #define RFCOMM_DLC_WAIT_RECV_UA 5 /* waiting to receive UA */ #define RFCOMM_DLC_OPEN 6 /* can send/receive */ #define RFCOMM_DLC_WAIT_DISCONNECT 7 /* waiting for disconnect */ #define RFCOMM_DLC_LISTEN 8 /* listening DLC */ /* * Bluetooth RFCOMM socket kernel prototypes */ struct socket; /* rfcomm_dlc.c */ struct rfcomm_dlc *rfcomm_dlc_lookup(struct rfcomm_session *, int); struct rfcomm_dlc *rfcomm_dlc_newconn(struct rfcomm_session *, int); void rfcomm_dlc_close(struct rfcomm_dlc *, int); void rfcomm_dlc_timeout(void *); int rfcomm_dlc_setmode(struct rfcomm_dlc *); int rfcomm_dlc_connect(struct rfcomm_dlc *); int rfcomm_dlc_open(struct rfcomm_dlc *); void rfcomm_dlc_start(struct rfcomm_dlc *); /* rfcomm_session.c */ void rfcomm_init(void); struct rfcomm_session *rfcomm_session_alloc(struct rfcomm_session_list *, struct sockaddr_bt *); struct rfcomm_session *rfcomm_session_lookup(struct sockaddr_bt *, struct sockaddr_bt *); void rfcomm_session_free(struct rfcomm_session *); int rfcomm_session_send_frame(struct rfcomm_session *, int, int); int rfcomm_session_send_uih(struct rfcomm_session *, struct rfcomm_dlc *, int, struct mbuf *); int rfcomm_session_send_mcc(struct rfcomm_session *, int, uint8_t, void *, int); /* rfcomm_socket.c */ int rfcomm_usrreq(struct socket *, int, struct mbuf *, struct mbuf *, struct mbuf *); int rfcomm_ctloutput(int, struct socket *, int, int, struct mbuf **); /* rfcomm_upper.c */ int rfcomm_attach(struct rfcomm_dlc **, const struct btproto *, void *); int rfcomm_bind(struct rfcomm_dlc *, struct sockaddr_bt *); int rfcomm_sockaddr(struct rfcomm_dlc *, struct sockaddr_bt *); int rfcomm_connect(struct rfcomm_dlc *, struct sockaddr_bt *); int rfcomm_peeraddr(struct rfcomm_dlc *, struct sockaddr_bt *); int rfcomm_disconnect(struct rfcomm_dlc *, int); int rfcomm_detach(struct rfcomm_dlc **); int rfcomm_listen(struct rfcomm_dlc *); int rfcomm_send(struct rfcomm_dlc *, struct mbuf *); int rfcomm_rcvd(struct rfcomm_dlc *, size_t); int rfcomm_setopt(struct rfcomm_dlc *, int, void *); int rfcomm_getopt(struct rfcomm_dlc *, int, void *); #endif /* _KERNEL */ #endif /* _NETBT_RFCOMM_H_ */