/* $OpenBSD: rfcomm_session.c,v 1.5 2008/11/22 04:42:58 uwe Exp $ */ /* $NetBSD: rfcomm_session.c,v 1.14 2008/08/06 15:01:24 plunky Exp $ */ /*- * Copyright (c) 2006 Itronix Inc. * All rights reserved. * * Written by Iain Hibbert for Itronix Inc. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. The name of Itronix Inc. may not be used to endorse * or promote products derived from this software without specific * prior written permission. * * THIS SOFTWARE IS PROVIDED BY ITRONIX INC. ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL ITRONIX INC. BE LIABLE FOR ANY * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND * ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. */ #include #include #include #include #include #include #include #include #include #include /****************************************************************************** * * RFCOMM Multiplexer Sessions sit directly on L2CAP channels, and can * multiplex up to 30 incoming and 30 outgoing connections. * Only one Multiplexer is allowed between any two devices. */ static void rfcomm_session_timeout(void *); static void rfcomm_session_recv_sabm(struct rfcomm_session *, int); static void rfcomm_session_recv_disc(struct rfcomm_session *, int); static void rfcomm_session_recv_ua(struct rfcomm_session *, int); static void rfcomm_session_recv_dm(struct rfcomm_session *, int); static void rfcomm_session_recv_uih(struct rfcomm_session *, int, int, struct mbuf *, int); static void rfcomm_session_recv_mcc(struct rfcomm_session *, struct mbuf *); static void rfcomm_session_recv_mcc_test(struct rfcomm_session *, int, struct mbuf *); static void rfcomm_session_recv_mcc_fcon(struct rfcomm_session *, int); static void rfcomm_session_recv_mcc_fcoff(struct rfcomm_session *, int); static void rfcomm_session_recv_mcc_msc(struct rfcomm_session *, int, struct mbuf *); static void rfcomm_session_recv_mcc_rpn(struct rfcomm_session *, int, struct mbuf *); static void rfcomm_session_recv_mcc_rls(struct rfcomm_session *, int, struct mbuf *); static void rfcomm_session_recv_mcc_pn(struct rfcomm_session *, int, struct mbuf *); static void rfcomm_session_recv_mcc_nsc(struct rfcomm_session *, int, struct mbuf *); /* L2CAP callbacks */ static void rfcomm_session_connecting(void *); static void rfcomm_session_connected(void *); static void rfcomm_session_disconnected(void *, int); static void *rfcomm_session_newconn(void *, struct sockaddr_bt *, struct sockaddr_bt *); static void rfcomm_session_complete(void *, int); static void rfcomm_session_linkmode(void *, int); static void rfcomm_session_input(void *, struct mbuf *); static const struct btproto rfcomm_session_proto = { rfcomm_session_connecting, rfcomm_session_connected, rfcomm_session_disconnected, rfcomm_session_newconn, rfcomm_session_complete, rfcomm_session_linkmode, rfcomm_session_input, }; struct rfcomm_session_list rfcomm_session_active = LIST_HEAD_INITIALIZER(rfcomm_session_active); struct rfcomm_session_list rfcomm_session_listen = LIST_HEAD_INITIALIZER(rfcomm_session_listen); struct pool rfcomm_credit_pool; /* * RFCOMM System Parameters (see section 5.3) */ int rfcomm_mtu_default = 127; /* bytes */ int rfcomm_ack_timeout = 20; /* seconds */ int rfcomm_mcc_timeout = 20; /* seconds */ /* * Reversed CRC table as per TS 07.10 Annex B.3.5 */ static const uint8_t crctable[256] = { /* reversed, 8-bit, poly=0x07 */ 0x00, 0x91, 0xe3, 0x72, 0x07, 0x96, 0xe4, 0x75, 0x0e, 0x9f, 0xed, 0x7c, 0x09, 0x98, 0xea, 0x7b, 0x1c, 0x8d, 0xff, 0x6e, 0x1b, 0x8a, 0xf8, 0x69, 0x12, 0x83, 0xf1, 0x60, 0x15, 0x84, 0xf6, 0x67, 0x38, 0xa9, 0xdb, 0x4a, 0x3f, 0xae, 0xdc, 0x4d, 0x36, 0xa7, 0xd5, 0x44, 0x31, 0xa0, 0xd2, 0x43, 0x24, 0xb5, 0xc7, 0x56, 0x23, 0xb2, 0xc0, 0x51, 0x2a, 0xbb, 0xc9, 0x58, 0x2d, 0xbc, 0xce, 0x5f, 0x70, 0xe1, 0x93, 0x02, 0x77, 0xe6, 0x94, 0x05, 0x7e, 0xef, 0x9d, 0x0c, 0x79, 0xe8, 0x9a, 0x0b, 0x6c, 0xfd, 0x8f, 0x1e, 0x6b, 0xfa, 0x88, 0x19, 0x62, 0xf3, 0x81, 0x10, 0x65, 0xf4, 0x86, 0x17, 0x48, 0xd9, 0xab, 0x3a, 0x4f, 0xde, 0xac, 0x3d, 0x46, 0xd7, 0xa5, 0x34, 0x41, 0xd0, 0xa2, 0x33, 0x54, 0xc5, 0xb7, 0x26, 0x53, 0xc2, 0xb0, 0x21, 0x5a, 0xcb, 0xb9, 0x28, 0x5d, 0xcc, 0xbe, 0x2f, 0xe0, 0x71, 0x03, 0x92, 0xe7, 0x76, 0x04, 0x95, 0xee, 0x7f, 0x0d, 0x9c, 0xe9, 0x78, 0x0a, 0x9b, 0xfc, 0x6d, 0x1f, 0x8e, 0xfb, 0x6a, 0x18, 0x89, 0xf2, 0x63, 0x11, 0x80, 0xf5, 0x64, 0x16, 0x87, 0xd8, 0x49, 0x3b, 0xaa, 0xdf, 0x4e, 0x3c, 0xad, 0xd6, 0x47, 0x35, 0xa4, 0xd1, 0x40, 0x32, 0xa3, 0xc4, 0x55, 0x27, 0xb6, 0xc3, 0x52, 0x20, 0xb1, 0xca, 0x5b, 0x29, 0xb8, 0xcd, 0x5c, 0x2e, 0xbf, 0x90, 0x01, 0x73, 0xe2, 0x97, 0x06, 0x74, 0xe5, 0x9e, 0x0f, 0x7d, 0xec, 0x99, 0x08, 0x7a, 0xeb, 0x8c, 0x1d, 0x6f, 0xfe, 0x8b, 0x1a, 0x68, 0xf9, 0x82, 0x13, 0x61, 0xf0, 0x85, 0x14, 0x66, 0xf7, 0xa8, 0x39, 0x4b, 0xda, 0xaf, 0x3e, 0x4c, 0xdd, 0xa6, 0x37, 0x45, 0xd4, 0xa1, 0x30, 0x42, 0xd3, 0xb4, 0x25, 0x57, 0xc6, 0xb3, 0x22, 0x50, 0xc1, 0xba, 0x2b, 0x59, 0xc8, 0xbd, 0x2c, 0x5e, 0xcf }; #define FCS(f, d) crctable[(f) ^ (d)] /* * rfcomm_init() * * initialize the "credit pool". */ void rfcomm_init(void) { pool_init(&rfcomm_credit_pool, 0, 0, 0, 0, "rfcomm_credit", NULL); } /* * rfcomm_session_alloc(list, sockaddr) * * allocate a new session and fill in the blanks, then * attach session to front of specified list (active or listen) */ struct rfcomm_session * rfcomm_session_alloc(struct rfcomm_session_list *list, struct sockaddr_bt *laddr) { struct rfcomm_session *rs; int err; rs = malloc(sizeof(*rs), M_BLUETOOTH, M_NOWAIT | M_ZERO); if (rs == NULL) return NULL; rs->rs_state = RFCOMM_SESSION_CLOSED; timeout_set(&rs->rs_timeout, rfcomm_session_timeout, rs); SIMPLEQ_INIT(&rs->rs_credits); LIST_INIT(&rs->rs_dlcs); err = l2cap_attach(&rs->rs_l2cap, &rfcomm_session_proto, rs); if (err) { free(rs, M_BLUETOOTH); return NULL; } (void)l2cap_getopt(rs->rs_l2cap, SO_L2CAP_OMTU, &rs->rs_mtu); if (laddr->bt_psm == L2CAP_PSM_ANY) laddr->bt_psm = L2CAP_PSM_RFCOMM; (void)l2cap_bind(rs->rs_l2cap, laddr); LIST_INSERT_HEAD(list, rs, rs_next); return rs; } /* * rfcomm_session_free(rfcomm_session) * * release a session, including any cleanup */ void rfcomm_session_free(struct rfcomm_session *rs) { struct rfcomm_credit *credit; KASSERT(rs != NULL); KASSERT(LIST_EMPTY(&rs->rs_dlcs)); rs->rs_state = RFCOMM_SESSION_CLOSED; /* * If the callout is already invoked we have no way to stop it, * but it will call us back right away (there are no DLC's) so * not to worry. */ timeout_del(&rs->rs_timeout); if (timeout_triggered(&rs->rs_timeout)) return; /* * Take care that rfcomm_session_disconnected() doesnt call * us back either as it will do if the l2cap_channel has not * been closed when we detach it.. */ if (rs->rs_flags & RFCOMM_SESSION_FREE) return; rs->rs_flags |= RFCOMM_SESSION_FREE; /* throw away any remaining credit notes */ while ((credit = SIMPLEQ_FIRST(&rs->rs_credits)) != NULL) { SIMPLEQ_REMOVE_HEAD(&rs->rs_credits, rc_next); pool_put(&rfcomm_credit_pool, credit); } KASSERT(SIMPLEQ_EMPTY(&rs->rs_credits)); /* Goodbye! */ LIST_REMOVE(rs, rs_next); l2cap_detach(&rs->rs_l2cap); free(rs, M_BLUETOOTH); } /* * rfcomm_session_lookup(sockaddr, sockaddr) * * Find active rfcomm session matching src and dest addresses * when src is BDADDR_ANY match any local address */ struct rfcomm_session * rfcomm_session_lookup(struct sockaddr_bt *src, struct sockaddr_bt *dest) { struct rfcomm_session *rs; struct sockaddr_bt addr; LIST_FOREACH(rs, &rfcomm_session_active, rs_next) { if (rs->rs_state == RFCOMM_SESSION_CLOSED) continue; l2cap_sockaddr(rs->rs_l2cap, &addr); if (bdaddr_same(&src->bt_bdaddr, &addr.bt_bdaddr) == 0) if (bdaddr_any(&src->bt_bdaddr) == 0) continue; l2cap_peeraddr(rs->rs_l2cap, &addr); if (addr.bt_psm != dest->bt_psm) continue; if (bdaddr_same(&dest->bt_bdaddr, &addr.bt_bdaddr)) break; } return rs; } /* * rfcomm_session_timeout(rfcomm_session) * * Session timeouts are scheduled when a session is left or * created with no DLCs, and when SABM(0) or DISC(0) are * sent. * * So, if it is in an open state with DLC's attached then * we leave it alone, otherwise the session is lost. */ static void rfcomm_session_timeout(void *arg) { struct rfcomm_session *rs = arg; struct rfcomm_dlc *dlc; KASSERT(rs != NULL); mutex_enter(&bt_lock); if (rs->rs_state != RFCOMM_SESSION_OPEN) { DPRINTF("timeout\n"); rs->rs_state = RFCOMM_SESSION_CLOSED; while (!LIST_EMPTY(&rs->rs_dlcs)) { dlc = LIST_FIRST(&rs->rs_dlcs); rfcomm_dlc_close(dlc, ETIMEDOUT); } } if (LIST_EMPTY(&rs->rs_dlcs)) { DPRINTF("expiring\n"); rfcomm_session_free(rs); } mutex_exit(&bt_lock); } /*********************************************************************** * * RFCOMM Session L2CAP protocol callbacks * */ static void rfcomm_session_connecting(void *arg) { /* struct rfcomm_session *rs = arg; */ DPRINTF("Connecting\n"); } static void rfcomm_session_connected(void *arg) { struct rfcomm_session *rs = arg; DPRINTF("Connected\n"); /* * L2CAP is open. * * If we are initiator, we can send our SABM(0) * a timeout should be active? * * We must take note of the L2CAP MTU because currently * the L2CAP implementation can only do Basic Mode. */ l2cap_getopt(rs->rs_l2cap, SO_L2CAP_OMTU, &rs->rs_mtu); rs->rs_mtu -= 6; /* (RFCOMM overhead could be this big) */ if (rs->rs_mtu < RFCOMM_MTU_MIN) { rfcomm_session_disconnected(rs, EINVAL); return; } if (IS_INITIATOR(rs)) { int err; err = rfcomm_session_send_frame(rs, RFCOMM_FRAME_SABM, 0); if (err) rfcomm_session_disconnected(rs, err); timeout_add_sec(&rs->rs_timeout, rfcomm_ack_timeout); } } static void rfcomm_session_disconnected(void *arg, int err) { struct rfcomm_session *rs = arg; struct rfcomm_dlc *dlc; DPRINTF("Disconnected\n"); rs->rs_state = RFCOMM_SESSION_CLOSED; while (!LIST_EMPTY(&rs->rs_dlcs)) { dlc = LIST_FIRST(&rs->rs_dlcs); rfcomm_dlc_close(dlc, err); } rfcomm_session_free(rs); } static void * rfcomm_session_newconn(void *arg, struct sockaddr_bt *laddr, struct sockaddr_bt *raddr) { struct rfcomm_session *new, *rs = arg; DPRINTF("New Connection\n"); /* * Incoming session connect request. We should return a new * session pointer if this is acceptable. The L2CAP layer * passes local and remote addresses, which we must check as * only one RFCOMM session is allowed between any two devices */ new = rfcomm_session_lookup(laddr, raddr); if (new != NULL) return NULL; new = rfcomm_session_alloc(&rfcomm_session_active, laddr); if (new == NULL) return NULL; new->rs_mtu = rs->rs_mtu; new->rs_state = RFCOMM_SESSION_WAIT_CONNECT; /* * schedule an expiry so that if nothing comes of it we * can punt. */ timeout_add_sec(&new->rs_timeout, rfcomm_mcc_timeout); return new->rs_l2cap; } static void rfcomm_session_complete(void *arg, int count) { struct rfcomm_session *rs = arg; struct rfcomm_credit *credit; struct rfcomm_dlc *dlc; /* * count L2CAP packets are 'complete', meaning that they are cleared * our buffers (for best effort) or arrived safe (for guaranteed) so * we can take it off our list and pass the message on, so that * eventually the data can be removed from the sockbuf */ while (count-- > 0) { credit = SIMPLEQ_FIRST(&rs->rs_credits); #ifdef DIAGNOSTIC if (credit == NULL) { printf("%s: too many packets completed!\n", __func__); break; } #endif dlc = credit->rc_dlc; if (dlc != NULL) { dlc->rd_pending--; (*dlc->rd_proto->complete) (dlc->rd_upper, credit->rc_len); /* * if not using credit flow control, we may push * more data now */ if ((rs->rs_flags & RFCOMM_SESSION_CFC) == 0 && dlc->rd_state == RFCOMM_DLC_OPEN) { rfcomm_dlc_start(dlc); } /* * When shutdown is indicated, we are just waiting to * clear outgoing data. */ if ((dlc->rd_flags & RFCOMM_DLC_SHUTDOWN) && dlc->rd_txbuf == NULL && dlc->rd_pending == 0) { dlc->rd_state = RFCOMM_DLC_WAIT_DISCONNECT; rfcomm_session_send_frame(rs, RFCOMM_FRAME_DISC, dlc->rd_dlci); timeout_add_sec(&dlc->rd_timeout, rfcomm_ack_timeout); } } SIMPLEQ_REMOVE_HEAD(&rs->rs_credits, rc_next); pool_put(&rfcomm_credit_pool, credit); } /* * If session is closed, we are just waiting to clear the queue */ if (rs->rs_state == RFCOMM_SESSION_CLOSED) { if (SIMPLEQ_EMPTY(&rs->rs_credits)) l2cap_disconnect(rs->rs_l2cap, 0); } } /* * Link Mode changed * * This is called when a mode change is complete. Proceed with connections * where appropriate, or pass the new mode to any active DLCs. */ static void rfcomm_session_linkmode(void *arg, int new) { struct rfcomm_session *rs = arg; struct rfcomm_dlc *dlc, *next; int err, mode = 0; DPRINTF("auth %s, encrypt %s, secure %s\n", (new & L2CAP_LM_AUTH ? "on" : "off"), (new & L2CAP_LM_ENCRYPT ? "on" : "off"), (new & L2CAP_LM_SECURE ? "on" : "off")); if (new & L2CAP_LM_AUTH) mode |= RFCOMM_LM_AUTH; if (new & L2CAP_LM_ENCRYPT) mode |= RFCOMM_LM_ENCRYPT; if (new & L2CAP_LM_SECURE) mode |= RFCOMM_LM_SECURE; next = LIST_FIRST(&rs->rs_dlcs); while ((dlc = next) != NULL) { next = LIST_NEXT(dlc, rd_next); switch (dlc->rd_state) { case RFCOMM_DLC_WAIT_SEND_SABM: /* we are connecting */ if ((mode & dlc->rd_mode) != dlc->rd_mode) { rfcomm_dlc_close(dlc, ECONNABORTED); } else { err = rfcomm_session_send_frame(rs, RFCOMM_FRAME_SABM, dlc->rd_dlci); if (err) { rfcomm_dlc_close(dlc, err); } else { dlc->rd_state = RFCOMM_DLC_WAIT_RECV_UA; timeout_add_sec(&dlc->rd_timeout, rfcomm_ack_timeout); break; } } /* * If we aborted the connection and there are no more DLCs * on the session, it is our responsibility to disconnect. */ if (!LIST_EMPTY(&rs->rs_dlcs)) break; rs->rs_state = RFCOMM_SESSION_WAIT_DISCONNECT; rfcomm_session_send_frame(rs, RFCOMM_FRAME_DISC, 0); timeout_add_sec(&rs->rs_timeout, rfcomm_ack_timeout); break; case RFCOMM_DLC_WAIT_SEND_UA: /* they are connecting */ if ((mode & dlc->rd_mode) != dlc->rd_mode) { rfcomm_session_send_frame(rs, RFCOMM_FRAME_DM, dlc->rd_dlci); rfcomm_dlc_close(dlc, ECONNABORTED); break; } err = rfcomm_session_send_frame(rs, RFCOMM_FRAME_UA, dlc->rd_dlci); if (err) { rfcomm_session_send_frame(rs, RFCOMM_FRAME_DM, dlc->rd_dlci); rfcomm_dlc_close(dlc, err); break; } err = rfcomm_dlc_open(dlc); if (err) { rfcomm_session_send_frame(rs, RFCOMM_FRAME_DM, dlc->rd_dlci); rfcomm_dlc_close(dlc, err); break; } break; case RFCOMM_DLC_WAIT_RECV_UA: case RFCOMM_DLC_OPEN: /* already established */ (*dlc->rd_proto->linkmode)(dlc->rd_upper, mode); break; default: break; } } } /* * Receive data from L2CAP layer for session. There is always exactly one * RFCOMM frame contained in each L2CAP frame. */ static void rfcomm_session_input(void *arg, struct mbuf *m) { struct rfcomm_session *rs = arg; int dlci, len, type, pf; uint8_t fcs, b; KASSERT(m != NULL); KASSERT(rs != NULL); /* * UIH frames: FCS is only calculated on address and control fields * For other frames: FCS is calculated on address, control and length * Length may extend to two octets */ fcs = 0xff; if (m->m_pkthdr.len < 4) { DPRINTF("short frame (%d), discarded\n", m->m_pkthdr.len); goto done; } /* address - one octet */ m_copydata(m, 0, 1, &b); m_adj(m, 1); fcs = FCS(fcs, b); dlci = RFCOMM_DLCI(b); /* control - one octet */ m_copydata(m, 0, 1, &b); m_adj(m, 1); fcs = FCS(fcs, b); type = RFCOMM_TYPE(b); pf = RFCOMM_PF(b); /* length - may be two octets */ m_copydata(m, 0, 1, &b); m_adj(m, 1); if (type != RFCOMM_FRAME_UIH) fcs = FCS(fcs, b); len = (b >> 1) & 0x7f; if (RFCOMM_EA(b) == 0) { if (m->m_pkthdr.len < 2) { DPRINTF("short frame (%d, EA = 0), discarded\n", m->m_pkthdr.len); goto done; } m_copydata(m, 0, 1, &b); m_adj(m, 1); if (type != RFCOMM_FRAME_UIH) fcs = FCS(fcs, b); len |= (b << 7); } /* FCS byte is last octet in frame */ m_copydata(m, m->m_pkthdr.len - 1, 1, &b); m_adj(m, -1); fcs = FCS(fcs, b); if (fcs != 0xcf) { DPRINTF("Bad FCS value (%#2.2x), frame discarded\n", fcs); goto done; } DPRINTFN(10, "dlci %d, type %2.2x, len = %d\n", dlci, type, len); switch (type) { case RFCOMM_FRAME_SABM: if (pf) rfcomm_session_recv_sabm(rs, dlci); break; case RFCOMM_FRAME_DISC: if (pf) rfcomm_session_recv_disc(rs, dlci); break; case RFCOMM_FRAME_UA: if (pf) rfcomm_session_recv_ua(rs, dlci); break; case RFCOMM_FRAME_DM: rfcomm_session_recv_dm(rs, dlci); break; case RFCOMM_FRAME_UIH: rfcomm_session_recv_uih(rs, dlci, pf, m, len); return; /* (no release) */ default: UNKNOWN(type); break; } done: m_freem(m); } /*********************************************************************** * * RFCOMM Session receive processing */ /* * rfcomm_session_recv_sabm(rfcomm_session, dlci) * * Set Asyncrhonous Balanced Mode - open the channel. */ static void rfcomm_session_recv_sabm(struct rfcomm_session *rs, int dlci) { struct rfcomm_dlc *dlc; int err; DPRINTFN(5, "SABM(%d)\n", dlci); if (dlci == 0) { /* Open Session */ rs->rs_state = RFCOMM_SESSION_OPEN; rfcomm_session_send_frame(rs, RFCOMM_FRAME_UA, 0); LIST_FOREACH(dlc, &rs->rs_dlcs, rd_next) { if (dlc->rd_state == RFCOMM_DLC_WAIT_SESSION) rfcomm_dlc_connect(dlc); } return; } if (rs->rs_state != RFCOMM_SESSION_OPEN) { DPRINTF("session was not even open!\n"); return; } /* validate direction bit */ if ((IS_INITIATOR(rs) && !RFCOMM_DIRECTION(dlci)) || (!IS_INITIATOR(rs) && RFCOMM_DIRECTION(dlci))) { DPRINTF("Invalid direction bit on DLCI\n"); return; } /* * look for our DLC - this may exist if we received PN * already, or we may have to fabricate a new one. */ dlc = rfcomm_dlc_lookup(rs, dlci); if (dlc == NULL) { dlc = rfcomm_dlc_newconn(rs, dlci); if (dlc == NULL) return; /* (DM is sent) */ } /* * ..but if this DLC is not waiting to connect, they did * something wrong, ignore it. */ if (dlc->rd_state != RFCOMM_DLC_WAIT_CONNECT) return; /* set link mode */ err = rfcomm_dlc_setmode(dlc); if (err == EINPROGRESS) { dlc->rd_state = RFCOMM_DLC_WAIT_SEND_UA; (*dlc->rd_proto->connecting)(dlc->rd_upper); return; } if (err) goto close; err = rfcomm_session_send_frame(rs, RFCOMM_FRAME_UA, dlci); if (err) goto close; /* and mark it open */ err = rfcomm_dlc_open(dlc); if (err) goto close; return; close: rfcomm_dlc_close(dlc, err); } /* * Receive Disconnect Command */ static void rfcomm_session_recv_disc(struct rfcomm_session *rs, int dlci) { struct rfcomm_dlc *dlc; DPRINTFN(5, "DISC(%d)\n", dlci); if (dlci == 0) { /* * Disconnect Session * * We set the session state to CLOSED so that when * the UA frame is clear the session will be closed * automatically. We wont bother to close any DLC's * just yet as there should be none. In the unlikely * event that something is left, it will get flushed * out as the session goes down. */ rfcomm_session_send_frame(rs, RFCOMM_FRAME_UA, 0); rs->rs_state = RFCOMM_SESSION_CLOSED; return; } dlc = rfcomm_dlc_lookup(rs, dlci); if (dlc == NULL) { rfcomm_session_send_frame(rs, RFCOMM_FRAME_DM, dlci); return; } rfcomm_dlc_close(dlc, ECONNRESET); rfcomm_session_send_frame(rs, RFCOMM_FRAME_UA, dlci); } /* * Receive Unnumbered Acknowledgement Response * * This should be a response to a DISC or SABM frame that we * have previously sent. If unexpected, ignore it. */ static void rfcomm_session_recv_ua(struct rfcomm_session *rs, int dlci) { struct rfcomm_dlc *dlc; DPRINTFN(5, "UA(%d)\n", dlci); if (dlci == 0) { switch (rs->rs_state) { case RFCOMM_SESSION_WAIT_CONNECT: /* We sent SABM */ timeout_del(&rs->rs_timeout); rs->rs_state = RFCOMM_SESSION_OPEN; LIST_FOREACH(dlc, &rs->rs_dlcs, rd_next) { if (dlc->rd_state == RFCOMM_DLC_WAIT_SESSION) rfcomm_dlc_connect(dlc); } break; case RFCOMM_SESSION_WAIT_DISCONNECT: /* We sent DISC */ timeout_del(&rs->rs_timeout); rs->rs_state = RFCOMM_SESSION_CLOSED; l2cap_disconnect(rs->rs_l2cap, 0); break; default: DPRINTF("Received spurious UA(0)!\n"); break; } return; } /* * If we have no DLC on this dlci, we may have aborted * without shutting down properly, so check if the session * needs disconnecting. */ dlc = rfcomm_dlc_lookup(rs, dlci); if (dlc == NULL) goto check; switch (dlc->rd_state) { case RFCOMM_DLC_WAIT_RECV_UA: /* We sent SABM */ rfcomm_dlc_open(dlc); return; case RFCOMM_DLC_WAIT_DISCONNECT: /* We sent DISC */ rfcomm_dlc_close(dlc, 0); break; default: DPRINTF("Received spurious UA(%d)!\n", dlci); return; } check: /* last one out turns out the light */ if (LIST_EMPTY(&rs->rs_dlcs)) { rs->rs_state = RFCOMM_SESSION_WAIT_DISCONNECT; rfcomm_session_send_frame(rs, RFCOMM_FRAME_DISC, 0); timeout_add_sec(&rs->rs_timeout, rfcomm_ack_timeout); } } /* * Receive Disconnected Mode Response * * If this does not apply to a known DLC then we may ignore it. */ static void rfcomm_session_recv_dm(struct rfcomm_session *rs, int dlci) { struct rfcomm_dlc *dlc; DPRINTFN(5, "DM(%d)\n", dlci); dlc = rfcomm_dlc_lookup(rs, dlci); if (dlc == NULL) return; if (dlc->rd_state == RFCOMM_DLC_WAIT_CONNECT) rfcomm_dlc_close(dlc, ECONNREFUSED); else rfcomm_dlc_close(dlc, ECONNRESET); } /* * Receive Unnumbered Information with Header check (MCC or data packet) */ static void rfcomm_session_recv_uih(struct rfcomm_session *rs, int dlci, int pf, struct mbuf *m, int len) { struct rfcomm_dlc *dlc; uint8_t credits = 0; DPRINTFN(10, "UIH(%d)\n", dlci); if (dlci == 0) { rfcomm_session_recv_mcc(rs, m); return; } if (m->m_pkthdr.len != len + pf) { DPRINTF("Bad Frame Length (%d), frame discarded\n", m->m_pkthdr.len); goto discard; } dlc = rfcomm_dlc_lookup(rs, dlci); if (dlc == NULL) { DPRINTF("UIH received for non existent DLC, discarded\n"); rfcomm_session_send_frame(rs, RFCOMM_FRAME_DM, dlci); goto discard; } if (dlc->rd_state != RFCOMM_DLC_OPEN) { DPRINTF("non-open DLC (state = %d), discarded\n", dlc->rd_state); goto discard; } /* if PF is set, credits were included */ if (rs->rs_flags & RFCOMM_SESSION_CFC) { if (pf != 0) { if (m->m_pkthdr.len < sizeof(credits)) { DPRINTF("Bad PF value, UIH discarded\n"); goto discard; } m_copydata(m, 0, sizeof(credits), &credits); m_adj(m, sizeof(credits)); dlc->rd_txcred += credits; if (credits > 0 && dlc->rd_txbuf != NULL) rfcomm_dlc_start(dlc); } if (len == 0) goto discard; if (dlc->rd_rxcred == 0) { DPRINTF("Credit limit reached, UIH discarded\n"); goto discard; } if (len > dlc->rd_rxsize) { DPRINTF("UIH frame exceeds rxsize, discarded\n"); goto discard; } dlc->rd_rxcred--; dlc->rd_rxsize -= len; } (*dlc->rd_proto->input)(dlc->rd_upper, m); return; discard: m_freem(m); } /* * Receive Multiplexer Control Command */ static void rfcomm_session_recv_mcc(struct rfcomm_session *rs, struct mbuf *m) { int type, cr, len; uint8_t b; /* * Extract MCC header. * * Fields are variable length using extension bit = 1 to signify the * last octet in the sequence. * * Only single octet types are defined in TS 07.10/RFCOMM spec * * Length can realistically only use 15 bits (max RFCOMM MTU) */ if (m->m_pkthdr.len < sizeof(b)) { DPRINTF("Short MCC header, discarded\n"); goto release; } m_copydata(m, 0, sizeof(b), &b); m_adj(m, sizeof(b)); if (RFCOMM_EA(b) == 0) { /* verify no extensions */ DPRINTF("MCC type EA = 0, discarded\n"); goto release; } type = RFCOMM_MCC_TYPE(b); cr = RFCOMM_CR(b); len = 0; do { if (m->m_pkthdr.len < sizeof(b)) { DPRINTF("Short MCC header, discarded\n"); goto release; } m_copydata(m, 0, sizeof(b), &b); m_adj(m, sizeof(b)); len = (len << 7) | (b >> 1); len = min(len, RFCOMM_MTU_MAX); } while (RFCOMM_EA(b) == 0); if (len != m->m_pkthdr.len) { DPRINTF("Incorrect MCC length, discarded\n"); goto release; } DPRINTFN(2, "MCC %s type %2.2x (%d bytes)\n", (cr ? "command" : "response"), type, len); /* * pass to command handler */ switch(type) { case RFCOMM_MCC_TEST: /* Test */ rfcomm_session_recv_mcc_test(rs, cr, m); break; case RFCOMM_MCC_FCON: /* Flow Control On */ rfcomm_session_recv_mcc_fcon(rs, cr); break; case RFCOMM_MCC_FCOFF: /* Flow Control Off */ rfcomm_session_recv_mcc_fcoff(rs, cr); break; case RFCOMM_MCC_MSC: /* Modem Status Command */ rfcomm_session_recv_mcc_msc(rs, cr, m); break; case RFCOMM_MCC_RPN: /* Remote Port Negotiation */ rfcomm_session_recv_mcc_rpn(rs, cr, m); break; case RFCOMM_MCC_RLS: /* Remote Line Status */ rfcomm_session_recv_mcc_rls(rs, cr, m); break; case RFCOMM_MCC_PN: /* Parameter Negotiation */ rfcomm_session_recv_mcc_pn(rs, cr, m); break; case RFCOMM_MCC_NSC: /* Non Supported Command */ rfcomm_session_recv_mcc_nsc(rs, cr, m); break; default: b = RFCOMM_MKMCC_TYPE(cr, type); rfcomm_session_send_mcc(rs, 0, RFCOMM_MCC_NSC, &b, sizeof(b)); } release: m_freem(m); } /* * process TEST command/response */ static void rfcomm_session_recv_mcc_test(struct rfcomm_session *rs, int cr, struct mbuf *m) { void *data; int len; if (cr == 0) /* ignore ack */ return; /* * we must send all the data they included back as is */ len = m->m_pkthdr.len; if (len > RFCOMM_MTU_MAX) return; data = malloc(len, M_BLUETOOTH, M_NOWAIT); if (data == NULL) return; m_copydata(m, 0, len, data); rfcomm_session_send_mcc(rs, 0, RFCOMM_MCC_TEST, data, len); free(data, M_BLUETOOTH); } /* * process Flow Control ON command/response */ static void rfcomm_session_recv_mcc_fcon(struct rfcomm_session *rs, int cr) { if (cr == 0) /* ignore ack */ return; rs->rs_flags |= RFCOMM_SESSION_RFC; rfcomm_session_send_mcc(rs, 0, RFCOMM_MCC_FCON, NULL, 0); } /* * process Flow Control OFF command/response */ static void rfcomm_session_recv_mcc_fcoff(struct rfcomm_session *rs, int cr) { if (cr == 0) /* ignore ack */ return; rs->rs_flags &= ~RFCOMM_SESSION_RFC; rfcomm_session_send_mcc(rs, 0, RFCOMM_MCC_FCOFF, NULL, 0); } /* * process Modem Status Command command/response */ static void rfcomm_session_recv_mcc_msc(struct rfcomm_session *rs, int cr, struct mbuf *m) { struct rfcomm_mcc_msc msc; /* (3 octets) */ struct rfcomm_dlc *dlc; int len = 0; /* [ADDRESS] */ if (m->m_pkthdr.len < sizeof(msc.address)) return; m_copydata(m, 0, sizeof(msc.address), &msc.address); m_adj(m, sizeof(msc.address)); len += sizeof(msc.address); dlc = rfcomm_dlc_lookup(rs, RFCOMM_DLCI(msc.address)); if (cr == 0) { /* ignore acks */ if (dlc != NULL) timeout_del(&dlc->rd_timeout); return; } if (dlc == NULL) { rfcomm_session_send_frame(rs, RFCOMM_FRAME_DM, RFCOMM_DLCI(msc.address)); return; } /* [SIGNALS] */ if (m->m_pkthdr.len < sizeof(msc.modem)) return; m_copydata(m, 0, sizeof(msc.modem), &msc.modem); m_adj(m, sizeof(msc.modem)); len += sizeof(msc.modem); dlc->rd_rmodem = msc.modem; /* XXX how do we signal this upstream? */ if (RFCOMM_EA(msc.modem) == 0) { if (m->m_pkthdr.len < sizeof(msc.brk)) return; m_copydata(m, 0, sizeof(msc.brk), &msc.brk); m_adj(m, sizeof(msc.brk)); len += sizeof(msc.brk); /* XXX how do we signal this upstream? */ } rfcomm_session_send_mcc(rs, 0, RFCOMM_MCC_MSC, &msc, len); } /* * process Remote Port Negotiation command/response */ static void rfcomm_session_recv_mcc_rpn(struct rfcomm_session *rs, int cr, struct mbuf *m) { struct rfcomm_mcc_rpn rpn; uint16_t mask; if (cr == 0) /* ignore ack */ return; /* default values */ rpn.bit_rate = RFCOMM_RPN_BR_9600; rpn.line_settings = RFCOMM_RPN_8_N_1; rpn.flow_control = RFCOMM_RPN_FLOW_NONE; rpn.xon_char = RFCOMM_RPN_XON_CHAR; rpn.xoff_char = RFCOMM_RPN_XOFF_CHAR; if (m->m_pkthdr.len == sizeof(rpn)) { m_copydata(m, 0, sizeof(rpn), (caddr_t)&rpn); rpn.param_mask = RFCOMM_RPN_PM_ALL; } else if (m->m_pkthdr.len == 1) { m_copydata(m, 0, 1, (caddr_t)&rpn); rpn.param_mask = letoh16(rpn.param_mask); } else { DPRINTF("Bad RPN length (%d)\n", m->m_pkthdr.len); return; } mask = 0; if (rpn.param_mask & RFCOMM_RPN_PM_RATE) mask |= RFCOMM_RPN_PM_RATE; if (rpn.param_mask & RFCOMM_RPN_PM_DATA && RFCOMM_RPN_DATA_BITS(rpn.line_settings) == RFCOMM_RPN_DATA_8) mask |= RFCOMM_RPN_PM_DATA; if (rpn.param_mask & RFCOMM_RPN_PM_STOP && RFCOMM_RPN_STOP_BITS(rpn.line_settings) == RFCOMM_RPN_STOP_1) mask |= RFCOMM_RPN_PM_STOP; if (rpn.param_mask & RFCOMM_RPN_PM_PARITY && RFCOMM_RPN_PARITY(rpn.line_settings) == RFCOMM_RPN_PARITY_NONE) mask |= RFCOMM_RPN_PM_PARITY; if (rpn.param_mask & RFCOMM_RPN_PM_XON && rpn.xon_char == RFCOMM_RPN_XON_CHAR) mask |= RFCOMM_RPN_PM_XON; if (rpn.param_mask & RFCOMM_RPN_PM_XOFF && rpn.xoff_char == RFCOMM_RPN_XOFF_CHAR) mask |= RFCOMM_RPN_PM_XOFF; if (rpn.param_mask & RFCOMM_RPN_PM_FLOW && rpn.flow_control == RFCOMM_RPN_FLOW_NONE) mask |= RFCOMM_RPN_PM_FLOW; rpn.param_mask = htole16(mask); rfcomm_session_send_mcc(rs, 0, RFCOMM_MCC_RPN, &rpn, sizeof(rpn)); } /* * process Remote Line Status command/response */ static void rfcomm_session_recv_mcc_rls(struct rfcomm_session *rs, int cr, struct mbuf *m) { struct rfcomm_mcc_rls rls; if (cr == 0) /* ignore ack */ return; if (m->m_pkthdr.len != sizeof(rls)) { DPRINTF("Bad RLS length %d\n", m->m_pkthdr.len); return; } m_copydata(m, 0, sizeof(rls), (caddr_t)&rls); /* * So far as I can tell, we just send back what * they sent us. This signifies errors that seem * irrelevent for RFCOMM over L2CAP. */ rls.address |= 0x03; /* EA = 1, CR = 1 */ rls.status &= 0x0f; /* only 4 bits valid */ rfcomm_session_send_mcc(rs, 0, RFCOMM_MCC_RLS, &rls, sizeof(rls)); } /* * process Parameter Negotiation command/response */ static void rfcomm_session_recv_mcc_pn(struct rfcomm_session *rs, int cr, struct mbuf *m) { struct rfcomm_dlc *dlc; struct rfcomm_mcc_pn pn; int err; if (m->m_pkthdr.len != sizeof(pn)) { DPRINTF("Bad PN length %d\n", m->m_pkthdr.len); return; } m_copydata(m, 0, sizeof(pn), (caddr_t)&pn); pn.dlci &= 0x3f; pn.mtu = letoh16(pn.mtu); dlc = rfcomm_dlc_lookup(rs, pn.dlci); if (cr) { /* Command */ /* * If there is no DLC present, this is a new * connection so attempt to make one */ if (dlc == NULL) { dlc = rfcomm_dlc_newconn(rs, pn.dlci); if (dlc == NULL) return; /* (DM is sent) */ } /* accept any valid MTU, and offer it back */ pn.mtu = min(pn.mtu, RFCOMM_MTU_MAX); pn.mtu = min(pn.mtu, rs->rs_mtu); pn.mtu = max(pn.mtu, RFCOMM_MTU_MIN); dlc->rd_mtu = pn.mtu; pn.mtu = htole16(pn.mtu); /* credits are only set before DLC is open */ if (dlc->rd_state == RFCOMM_DLC_WAIT_CONNECT && (pn.flow_control & 0xf0) == 0xf0) { rs->rs_flags |= RFCOMM_SESSION_CFC; dlc->rd_txcred = pn.credits & 0x07; dlc->rd_rxcred = (dlc->rd_rxsize / dlc->rd_mtu); dlc->rd_rxcred = min(dlc->rd_rxcred, RFCOMM_CREDITS_DEFAULT); pn.flow_control = 0xe0; pn.credits = dlc->rd_rxcred; } else { pn.flow_control = 0x00; pn.credits = 0x00; } /* unused fields must be ignored and set to zero */ pn.ack_timer = 0; pn.max_retrans = 0; /* send our response */ err = rfcomm_session_send_mcc(rs, 0, RFCOMM_MCC_PN, &pn, sizeof(pn)); if (err) goto close; } else { /* Response */ /* ignore responses with no matching DLC */ if (dlc == NULL) return; timeout_del(&dlc->rd_timeout); if (pn.mtu > RFCOMM_MTU_MAX || pn.mtu > dlc->rd_mtu) { dlc->rd_state = RFCOMM_DLC_WAIT_DISCONNECT; err = rfcomm_session_send_frame(rs, RFCOMM_FRAME_DISC, pn.dlci); if (err) goto close; timeout_add_sec(&dlc->rd_timeout, rfcomm_ack_timeout); return; } dlc->rd_mtu = pn.mtu; /* if DLC is not waiting to connect, we are done */ if (dlc->rd_state != RFCOMM_DLC_WAIT_CONNECT) return; /* set initial credits according to RFCOMM spec */ if ((pn.flow_control & 0xf0) == 0xe0) { rs->rs_flags |= RFCOMM_SESSION_CFC; dlc->rd_txcred = (pn.credits & 0x07); } timeout_add_sec(&dlc->rd_timeout, rfcomm_ack_timeout); /* set link mode */ err = rfcomm_dlc_setmode(dlc); if (err == EINPROGRESS) { dlc->rd_state = RFCOMM_DLC_WAIT_SEND_SABM; (*dlc->rd_proto->connecting)(dlc->rd_upper); return; } if (err) goto close; /* we can proceed now */ err = rfcomm_session_send_frame(rs, RFCOMM_FRAME_SABM, pn.dlci); if (err) goto close; dlc->rd_state = RFCOMM_DLC_WAIT_RECV_UA; } return; close: rfcomm_dlc_close(dlc, err); } /* * process Non Supported Command command/response */ static void rfcomm_session_recv_mcc_nsc(struct rfcomm_session *rs, int cr, struct mbuf *m) { struct rfcomm_dlc *dlc, *next; /* * Since we did nothing that is not mandatory, * we just abort the whole session.. */ next = LIST_FIRST(&rs->rs_dlcs); while ((dlc = next) != NULL) { next = LIST_NEXT(dlc, rd_next); rfcomm_dlc_close(dlc, ECONNABORTED); } rfcomm_session_free(rs); } /*********************************************************************** * * RFCOMM Session outward frame/uih/mcc building */ /* * SABM/DISC/DM/UA frames are all minimal and mostly identical. */ int rfcomm_session_send_frame(struct rfcomm_session *rs, int type, int dlci) { struct rfcomm_cmd_hdr *hdr; struct rfcomm_credit *credit; struct mbuf *m; uint8_t fcs, cr; credit = pool_get(&rfcomm_credit_pool, PR_NOWAIT); if (credit == NULL) return ENOMEM; m = m_gethdr(M_DONTWAIT, MT_DATA); if (m == NULL) { pool_put(&rfcomm_credit_pool, credit); return ENOMEM; } /* * The CR (command/response) bit identifies the frame either as a * commmand or a response and is used along with the DLCI to form * the address. Commands contain the non-initiator address, whereas * responses contain the initiator address, so the CR value is * also dependent on the session direction. */ if (type == RFCOMM_FRAME_UA || type == RFCOMM_FRAME_DM) cr = IS_INITIATOR(rs) ? 0 : 1; else cr = IS_INITIATOR(rs) ? 1 : 0; hdr = mtod(m, struct rfcomm_cmd_hdr *); hdr->address = RFCOMM_MKADDRESS(cr, dlci); hdr->control = RFCOMM_MKCONTROL(type, 1); /* PF = 1 */ hdr->length = (0x00 << 1) | 0x01; /* len = 0x00, EA = 1 */ fcs = 0xff; fcs = FCS(fcs, hdr->address); fcs = FCS(fcs, hdr->control); fcs = FCS(fcs, hdr->length); fcs = 0xff - fcs; /* ones complement */ hdr->fcs = fcs; m->m_pkthdr.len = m->m_len = sizeof(struct rfcomm_cmd_hdr); /* empty credit note */ credit->rc_dlc = NULL; credit->rc_len = m->m_pkthdr.len; SIMPLEQ_INSERT_TAIL(&rs->rs_credits, credit, rc_next); DPRINTFN(5, "dlci %d type %2.2x (%d bytes, fcs=%#2.2x)\n", dlci, type, m->m_pkthdr.len, fcs); return l2cap_send(rs->rs_l2cap, m); } /* * rfcomm_session_send_uih(rfcomm_session, rfcomm_dlc, credits, mbuf) * * UIH frame is per DLC data or Multiplexer Control Commands * when no DLC is given. Data mbuf is optional (just credits * will be sent in that case) */ int rfcomm_session_send_uih(struct rfcomm_session *rs, struct rfcomm_dlc *dlc, int credits, struct mbuf *m) { struct rfcomm_credit *credit; struct mbuf *m0 = NULL; int err, len; uint8_t fcs, *hdr; KASSERT(rs != NULL); len = (m == NULL) ? 0 : m->m_pkthdr.len; KASSERT(!(credits == 0 && len == 0)); /* * Make a credit note for the completion notification */ credit = pool_get(&rfcomm_credit_pool, PR_NOWAIT); if (credit == NULL) goto nomem; credit->rc_len = len; credit->rc_dlc = dlc; /* * Wrap UIH frame information around payload. * * [ADDRESS] [CONTROL] [LENGTH] [CREDITS] [...] [FCS] * * Address is one octet. * Control is one octet. * Length is one or two octets. * Credits may be one octet. * * FCS is one octet and calculated on address and * control octets only. * * If there are credits to be sent, we will set the PF * flag and include them in the frame. */ m0 = m_gethdr(M_DONTWAIT, MT_DATA); if (m0 == NULL) goto nomem; MH_ALIGN(m0, 5); /* (max 5 header octets) */ hdr = mtod(m0, uint8_t *); /* CR bit is set according to the initiator of the session */ *hdr = RFCOMM_MKADDRESS((IS_INITIATOR(rs) ? 1 : 0), (dlc ? dlc->rd_dlci : 0)); fcs = FCS(0xff, *hdr); hdr++; /* PF bit is set if credits are being sent */ *hdr = RFCOMM_MKCONTROL(RFCOMM_FRAME_UIH, (credits > 0 ? 1 : 0)); fcs = FCS(fcs, *hdr); hdr++; if (len < (1 << 7)) { *hdr++ = ((len << 1) & 0xfe) | 0x01; /* 7 bits, EA = 1 */ } else { *hdr++ = ((len << 1) & 0xfe); /* 7 bits, EA = 0 */ *hdr++ = ((len >> 7) & 0xff); /* 8 bits, no EA */ } if (credits > 0) *hdr++ = (uint8_t)credits; m0->m_len = hdr - mtod(m0, uint8_t *); /* Append payload */ m0->m_next = m; m = NULL; m0->m_pkthdr.len = m0->m_len + len; /* Append FCS */ fcs = 0xff - fcs; /* ones complement */ len = m0->m_pkthdr.len; m_copyback(m0, len, sizeof(fcs), &fcs); if (m0->m_pkthdr.len != len + sizeof(fcs)) goto nomem; DPRINTFN(10, "dlci %d, pktlen %d (%d data, %d credits), fcs=%#2.2x\n", dlc ? dlc->rd_dlci : 0, m0->m_pkthdr.len, credit->rc_len, credits, fcs); /* * UIH frame ready to go.. */ err = l2cap_send(rs->rs_l2cap, m0); if (err) goto fail; SIMPLEQ_INSERT_TAIL(&rs->rs_credits, credit, rc_next); return 0; nomem: err = ENOMEM; if (m0 != NULL) m_freem(m0); if (m != NULL) m_freem(m); fail: if (credit != NULL) pool_put(&rfcomm_credit_pool, credit); return err; } /* * send Multiplexer Control Command (or Response) on session */ int rfcomm_session_send_mcc(struct rfcomm_session *rs, int cr, uint8_t type, void *data, int len) { struct mbuf *m; uint8_t *hdr; int hlen; m = m_gethdr(M_DONTWAIT, MT_DATA); if (m == NULL) return ENOMEM; hdr = mtod(m, uint8_t *); /* * Technically the type field can extend past one octet, but none * currently defined will do that. */ *hdr++ = RFCOMM_MKMCC_TYPE(cr, type); /* * In the frame, the max length size is 2 octets (15 bits) whereas * no max length size is specified for MCC commands. We must allow * for 3 octets since for MCC frames we use 7 bits + EA in each. * * Only test data can possibly be that big. * * XXX Should we check this against the MTU? */ if (len < (1 << 7)) { *hdr++ = ((len << 1) & 0xfe) | 0x01; /* 7 bits, EA = 1 */ } else if (len < (1 << 14)) { *hdr++ = ((len << 1) & 0xfe); /* 7 bits, EA = 0 */ *hdr++ = ((len >> 6) & 0xfe) | 0x01; /* 7 bits, EA = 1 */ } else if (len < (1 << 15)) { *hdr++ = ((len << 1) & 0xfe); /* 7 bits, EA = 0 */ *hdr++ = ((len >> 6) & 0xfe); /* 7 bits, EA = 0 */ *hdr++ = ((len >> 13) & 0x02) | 0x01; /* 1 bit, EA = 1 */ } else { DPRINTF("incredible length! (%d)\n", len); m_freem(m); return EMSGSIZE; } /* * add command data (to same mbuf if possible) */ hlen = hdr - mtod(m, uint8_t *); if (len > 0) { m->m_pkthdr.len = m->m_len = MHLEN; m_copyback(m, hlen, len, data); if (m->m_pkthdr.len != max(MHLEN, hlen + len)) { m_freem(m); return ENOMEM; } } m->m_pkthdr.len = hlen + len; m->m_len = min(MHLEN, m->m_pkthdr.len); DPRINTFN(5, "%s type %2.2x len %d\n", (cr ? "command" : "response"), type, m->m_pkthdr.len); return rfcomm_session_send_uih(rs, NULL, 0, m); }