/* $OpenBSD: in6_proto.c,v 1.19 2000/02/28 16:40:39 itojun Exp $ */ /* * Copyright (C) 1995, 1996, 1997, and 1998 WIDE Project. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. Neither the name of the project nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ /* * Copyright (c) 1982, 1986, 1993 * The Regents of the University of California. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * @(#)in_proto.c 8.1 (Berkeley) 6/10/93 */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "gif.h" #if NGIF > 0 #include #endif #include #define offsetof(type, member) ((size_t)(&((type *)0)->member)) /* * TCP/IP protocol family: IP6, ICMP6, UDP, TCP. */ extern struct domain inet6domain; struct ip6protosw inet6sw[] = { { 0, &inet6domain, IPPROTO_IPV6, 0, 0, 0, 0, 0, 0, ip6_init, 0, frag6_slowtimo, frag6_drain, ip6_sysctl, }, { SOCK_DGRAM, &inet6domain, IPPROTO_UDP, PR_ATOMIC | PR_ADDR, udp6_input, 0, udp6_ctlinput, ip6_ctloutput, udp6_usrreq, 0, 0, 0, 0, udp_sysctl, }, #ifdef TCP6 { SOCK_STREAM, &inet6domain, IPPROTO_TCP, PR_CONNREQUIRED | PR_WANTRCVD, tcp6_input, 0, tcp6_ctlinput, tcp6_ctloutput, tcp6_usrreq, tcp6_init, tcp6_fasttimo, tcp6_slowtimo, tcp6_drain, tcp6_sysctl, }, #else { SOCK_STREAM, &inet6domain, IPPROTO_TCP, PR_CONNREQUIRED | PR_WANTRCVD, tcp6_input, 0, tcp6_ctlinput, tcp_ctloutput, tcp6_usrreq, #ifdef INET /* don't call timeout routines twice */ tcp_init, 0, 0, tcp_drain, #else tcp_init, tcp_fasttimo, tcp_slowtimo, tcp_drain, #endif tcp_sysctl, }, #endif /*TCP6*/ { SOCK_RAW, &inet6domain, IPPROTO_RAW, PR_ATOMIC | PR_ADDR, rip6_input, rip6_output, rip6_ctlinput, rip6_ctloutput, rip6_usrreq, 0, 0, 0, 0, }, { SOCK_RAW, &inet6domain, IPPROTO_ICMPV6, PR_ATOMIC | PR_ADDR, icmp6_input, rip6_output, 0, rip6_ctloutput, rip6_usrreq, icmp6_init, icmp6_fasttimo, 0, 0, icmp6_sysctl, }, { SOCK_RAW, &inet6domain, IPPROTO_DSTOPTS,PR_ATOMIC|PR_ADDR, dest6_input, 0, 0, 0, 0, 0, 0, 0, 0, }, { SOCK_RAW, &inet6domain, IPPROTO_ROUTING,PR_ATOMIC|PR_ADDR, route6_input, 0, 0, 0, 0, 0, 0, 0, 0, }, { SOCK_RAW, &inet6domain, IPPROTO_FRAGMENT,PR_ATOMIC|PR_ADDR, frag6_input, 0, 0, 0, 0, 0, 0, 0, 0, }, #ifdef IPSEC { SOCK_RAW, &inet6domain, IPPROTO_AH, PR_ATOMIC|PR_ADDR, ah6_input, 0, 0, 0, 0, 0, 0, 0, 0, ah_sysctl, }, { SOCK_RAW, &inet6domain, IPPROTO_ESP, PR_ATOMIC|PR_ADDR, esp6_input, 0, 0, 0, 0, 0, 0, 0, 0, esp_sysctl, }, #if 0 { SOCK_RAW, &inet6domain, IPPROTO_IPCOMP, PR_ATOMIC|PR_ADDR, ipcomp6_input, 0, 0, 0, 0, 0, 0, 0, 0, ipsec6_sysctl, }, #endif /* 0 */ #endif /* IPSEC */ #if NGIF > 0 { SOCK_RAW, &inet6domain, IPPROTO_IPV6, PR_ATOMIC|PR_ADDR, in6_gif_input,0, 0, 0, 0, 0, 0, 0, 0, }, #ifdef INET { SOCK_RAW, &inet6domain, IPPROTO_IPV6, PR_ATOMIC|PR_ADDR, in6_gif_input,0, 0, 0, 0, 0, 0, 0, 0, }, #endif /* INET */ #else /* NGIF */ { SOCK_RAW, &inet6domain, IPPROTO_IPV6, PR_ATOMIC|PR_ADDR, ip4_input6, rip6_output, 0, rip6_ctloutput, rip6_usrreq, /* XXX */ 0, 0, 0, 0, ipip_sysctl }, #ifdef INET { SOCK_RAW, &inet6domain, IPPROTO_IPV4, PR_ATOMIC|PR_ADDR, ip4_input6, rip6_output, 0, rip6_ctloutput, 0, 0, 0, 0, 0, }, #endif /* INET */ #endif /* GIF */ { SOCK_RAW, &inet6domain, IPPROTO_PIM, PR_ATOMIC|PR_ADDR, pim6_input, rip6_output, 0, rip6_ctloutput, rip6_usrreq, 0, 0, 0, 0, }, /* raw wildcard */ { SOCK_RAW, &inet6domain, 0, PR_ATOMIC | PR_ADDR, rip6_input, rip6_output, 0, rip6_ctloutput, rip6_usrreq, rip6_init, 0, 0, 0, }, }; struct domain inet6domain = { AF_INET6, "internet6", 0, 0, 0, (struct protosw *)inet6sw, (struct protosw *)&inet6sw[sizeof(inet6sw)/sizeof(inet6sw[0])], 0, rn_inithead, offsetof(struct sockaddr_in6, sin6_addr) << 3, sizeof(struct sockaddr_in6) }; /* * Internet configuration info */ #ifndef IPV6FORWARDING #ifdef GATEWAY6 #define IPV6FORWARDING 1 /* forward IP6 packets not for us */ #else #define IPV6FORWARDING 0 /* don't forward IP6 packets not for us */ #endif /* GATEWAY6 */ #endif /* !IPV6FORWARDING */ #ifndef IPV6_SENDREDIRECTS #define IPV6_SENDREDIRECTS 1 #endif int ip6_forwarding = IPV6FORWARDING; /* act as router? */ int ip6_sendredirects = IPV6_SENDREDIRECTS; int ip6_defhlim = IPV6_DEFHLIM; int ip6_defmcasthlim = IPV6_DEFAULT_MULTICAST_HOPS; int ip6_accept_rtadv = 0; /* "IPV6FORWARDING ? 0 : 1" is dangerous */ int ip6_maxfragpackets = 200; int ip6_log_interval = 5; int ip6_hdrnestlimit = 50; /* appropriate? */ int ip6_dad_count = 1; /* DupAddrDetectionTransmits */ u_int32_t ip6_flow_seq; int ip6_auto_flowlabel = 1; #if NGIF > 0 int ip6_gif_hlim = GIF_HLIM; #else int ip6_gif_hlim = 0; #endif int ip6_use_deprecated = 1; /* allow deprecated addr (RFC2462 5.5.4) */ int ip6_rr_prune = 5; /* router renumbering prefix * walk list every 5 sec. */ u_int32_t ip6_id = 0UL; int ip6_keepfaith = 0; time_t ip6_log_time = (time_t)0L; /* icmp6 */ /* * BSDI4 defines these variables in in_proto.c... * XXX: what if we don't define INET? Should we define pmtu6_expire * or so? (jinmei@kame.net 19990310) */ int pmtu_expire = 60*10; int pmtu_probe = 60*2; /* raw IP6 parameters */ /* * Nominal space allocated to a raw ip socket. */ #define RIPV6SNDQ 8192 #define RIPV6RCVQ 8192 u_long rip6_sendspace = RIPV6SNDQ; u_long rip6_recvspace = RIPV6RCVQ; /* ICMPV6 parameters */ int icmp6_rediraccept = 1; /* accept and process redirects */ int icmp6_redirtimeout = 10 * 60; /* 10 minutes */ u_int icmp6errratelim = 1000; /* 1000usec = 1msec */ int icmp6_nodeinfo = 1; /* enable/disable NI response */ #ifdef TCP6 /* TCP on IP6 parameters */ int tcp6_sendspace = 1024 * 8; int tcp6_recvspace = 1024 * 8; int tcp6_mssdflt = TCP6_MSS; int tcp6_rttdflt = TCP6TV_SRTTDFLT / PR_SLOWHZ; int tcp6_do_rfc1323 = 1; int tcp6_conntimeo = TCP6TV_KEEP_INIT; /* initial connection timeout */ int tcp6_43maxseg = 0; int tcp6_pmtu = 0; /* * Parameters for keepalive option. * Connections for which SO_KEEPALIVE is set will be probed * after being idle for a time of tcp6_keepidle (in units of PR_SLOWHZ). * Starting at that time, the connection is probed at intervals * of tcp6_keepintvl (same units) until a response is received * or until tcp6_keepcnt probes have been made, at which time * the connection is dropped. Note that a tcp6_keepidle value * under 2 hours is nonconformant with RFC-1122, Internet Host Requirements. */ int tcp6_keepidle = TCP6TV_KEEP_IDLE; /* time before probing idle */ int tcp6_keepintvl = TCP6TV_KEEPINTVL; /* interval betwn idle probes */ int tcp6_keepcnt = TCP6TV_KEEPCNT; /* max idle probes */ int tcp6_maxpersistidle = TCP6TV_KEEP_IDLE; /* max idle time in persist */ #ifndef INET_SERVER #define TCP6_LISTEN_HASH_SIZE 17 #define TCP6_CONN_HASH_SIZE 97 #define TCP6_SYN_HASH_SIZE 293 #define TCP6_SYN_BUCKET_SIZE 35 #else #define TCP6_LISTEN_HASH_SIZE 97 #define TCP6_CONN_HASH_SIZE 9973 #define TCP6_SYN_HASH_SIZE 997 #define TCP6_SYN_BUCKET_SIZE 35 #endif int tcp6_listen_hash_size = TCP6_LISTEN_HASH_SIZE; int tcp6_conn_hash_size = TCP6_CONN_HASH_SIZE; struct tcp6_hash_list tcp6_listen_hash[TCP6_LISTEN_HASH_SIZE], tcp6_conn_hash[TCP6_CONN_HASH_SIZE]; int tcp6_syn_cache_size = TCP6_SYN_HASH_SIZE; int tcp6_syn_cache_limit = TCP6_SYN_HASH_SIZE*TCP6_SYN_BUCKET_SIZE; int tcp6_syn_bucket_limit = 3*TCP6_SYN_BUCKET_SIZE; struct syn_cache_head6 tcp6_syn_cache[TCP6_SYN_HASH_SIZE]; struct syn_cache_head6 *tcp6_syn_cache_first; int tcp6_syn_cache_interval = 8; /* runs timer every 4 seconds */ int tcp6_syn_cache_timeo = TCP6TV_KEEP_INIT; /* * Parameters for computing a desirable data segment size * given an upper bound (either interface MTU, or peer's MSS option)_. * As applications tend to use a buffer size that is a multiple * of kilobytes, try for something that divides evenly. However, * do not round down too much. * * Round segment size down to a multiple of TCP6_ROUNDSIZE if this * does not result in lowering by more than (size/TCP6_ROUNDFRAC). * For example, round 536 to 512. Older versions of the system * effectively used MCLBYTES (1K or 2K) as TCP6_ROUNDSIZE, with * a value of 1 for TCP6_ROUNDFRAC (eliminating its effect). * We round to a multiple of 256 for SLIP. */ #ifndef TCP6_ROUNDSIZE #define TCP6_ROUNDSIZE 256 /* round to multiple of 256 */ #endif #ifndef TCP6_ROUNDFRAC #define TCP6_ROUNDFRAC 10 /* round down at most N/10, or 10% */ #endif int tcp6_roundsize = TCP6_ROUNDSIZE; int tcp6_roundfrac = TCP6_ROUNDFRAC; #endif /*TCP6*/ /* UDP on IP6 parameters */ int udp6_sendspace = 9216; /* really max datagram size */ int udp6_recvspace = 40 * (1024 + sizeof(struct sockaddr_in6)); /* 40 1K datagrams */