/* $OpenBSD: ch.c,v 1.71 2022/01/11 23:10:11 jsg Exp $ */ /* $NetBSD: ch.c,v 1.26 1997/02/21 22:06:52 thorpej Exp $ */ /* * Copyright (c) 1996, 1997 Jason R. Thorpe * All rights reserved. * * Partially based on an autochanger driver written by Stefan Grefen * and on an autochanger driver written by the Systems Programming Group * at the University of Utah Computer Science Department. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgements: * This product includes software developed by Jason R. Thorpe * for And Communications, http://www.and.com/ * 4. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #define CHRETRIES 2 #define CHUNIT(x) (minor((x))) struct ch_softc { struct device sc_dev; /* generic device info */ struct scsi_link *sc_link; /* link in the SCSI bus */ int sc_picker; /* current picker */ /* * The following information is obtained from the * element address assignment page. */ int sc_firsts[4]; /* firsts, indexed by CHET_* */ int sc_counts[4]; /* counts, indexed by CHET_* */ /* * The following mask defines the legal combinations * of elements for the MOVE MEDIUM command. */ u_int8_t sc_movemask[4]; /* * As above, but for EXCHANGE MEDIUM. */ u_int8_t sc_exchangemask[4]; int flags; /* misc. info */ /* * Quirks; see below. */ int sc_settledelay; /* delay for settle */ }; /* sc_flags */ #define CHF_ROTATE 0x01 /* picker can rotate */ /* Autoconfiguration glue */ int chmatch(struct device *, void *, void *); void chattach(struct device *, struct device *, void *); const struct cfattach ch_ca = { sizeof(struct ch_softc), chmatch, chattach }; struct cfdriver ch_cd = { NULL, "ch", DV_DULL }; const struct scsi_inquiry_pattern ch_patterns[] = { {T_CHANGER, T_REMOV, "", "", ""}, }; int ch_move(struct ch_softc *, struct changer_move *); int ch_exchange(struct ch_softc *, struct changer_exchange *); int ch_position(struct ch_softc *, struct changer_position *); int ch_usergetelemstatus(struct ch_softc *, struct changer_element_status_request *); int ch_getelemstatus(struct ch_softc *, int, int, caddr_t, size_t, int); int ch_get_params(struct ch_softc *, int); int ch_interpret_sense(struct scsi_xfer *xs); void ch_get_quirks(struct ch_softc *, struct scsi_inquiry_data *); /* * SCSI changer quirks. */ struct chquirk { struct scsi_inquiry_pattern cq_match; /* device id pattern */ int cq_settledelay; /* settle delay, in seconds */ }; struct chquirk chquirks[] = { {{T_CHANGER, T_REMOV, "SPECTRA", "9000", "0200"}, 75}, }; int chmatch(struct device *parent, void *match, void *aux) { struct scsi_attach_args *sa = aux; struct scsi_inquiry_data *inq = &sa->sa_sc_link->inqdata; int priority; (void)scsi_inqmatch(inq, ch_patterns, nitems(ch_patterns), sizeof(ch_patterns[0]), &priority); return priority; } void chattach(struct device *parent, struct device *self, void *aux) { struct ch_softc *sc = (struct ch_softc *)self; struct scsi_attach_args *sa = aux; struct scsi_link *link = sa->sa_sc_link; /* Glue into the SCSI bus */ sc->sc_link = link; link->interpret_sense = ch_interpret_sense; link->device_softc = sc; link->openings = 1; printf("\n"); /* * Store our our device's quirks. */ ch_get_quirks(sc, &link->inqdata); } int chopen(dev_t dev, int flags, int fmt, struct proc *p) { struct ch_softc *sc; int oldcounts[4]; int i, unit, error = 0; unit = CHUNIT(dev); if ((unit >= ch_cd.cd_ndevs) || ((sc = ch_cd.cd_devs[unit]) == NULL)) return ENXIO; /* * Only allow one open at a time. */ if (ISSET(sc->sc_link->flags, SDEV_OPEN)) return EBUSY; SET(sc->sc_link->flags, SDEV_OPEN); /* * Absorb any unit attention errors. We must notice * "Not ready" errors as a changer will report "In the * process of getting ready" any time it must rescan * itself to determine the state of the changer. */ error = scsi_test_unit_ready(sc->sc_link, TEST_READY_RETRIES, SCSI_IGNORE_ILLEGAL_REQUEST | SCSI_IGNORE_MEDIA_CHANGE); if (error) goto bad; /* * Get information about the device. Save old information * so we can decide whether to be verbose about new parameters. */ for (i = 0; i < 4; i++) { oldcounts[i] = sc->sc_counts[i]; } error = ch_get_params(sc, scsi_autoconf); if (error) goto bad; for (i = 0; i < 4; i++) { if (oldcounts[i] != sc->sc_counts[i]) { break; } } if (i < 4) { #ifdef CHANGER_DEBUG #define PLURAL(c) (c) == 1 ? "" : "s" printf("%s: %d slot%s, %d drive%s, %d picker%s, %d portal%s\n", sc->sc_dev.dv_xname, sc->sc_counts[CHET_ST], PLURAL(sc->sc_counts[CHET_ST]), sc->sc_counts[CHET_DT], PLURAL(sc->sc_counts[CHET_DT]), sc->sc_counts[CHET_MT], PLURAL(sc->sc_counts[CHET_MT]), sc->sc_counts[CHET_IE], PLURAL(sc->sc_counts[CHET_IE])); #undef PLURAL printf("%s: move mask: 0x%x 0x%x 0x%x 0x%x\n", sc->sc_dev.dv_xname, sc->sc_movemask[CHET_MT], sc->sc_movemask[CHET_ST], sc->sc_movemask[CHET_IE], sc->sc_movemask[CHET_DT]); printf("%s: exchange mask: 0x%x 0x%x 0x%x 0x%x\n", sc->sc_dev.dv_xname, sc->sc_exchangemask[CHET_MT], sc->sc_exchangemask[CHET_ST], sc->sc_exchangemask[CHET_IE], sc->sc_exchangemask[CHET_DT]); #endif /* CHANGER_DEBUG */ } /* Default the current picker. */ sc->sc_picker = sc->sc_firsts[CHET_MT]; return 0; bad: CLR(sc->sc_link->flags, SDEV_OPEN); return error; } int chclose(dev_t dev, int flags, int fmt, struct proc *p) { struct ch_softc *sc = ch_cd.cd_devs[CHUNIT(dev)]; CLR(sc->sc_link->flags, SDEV_OPEN); return 0; } int chioctl(dev_t dev, u_long cmd, caddr_t data, int flags, struct proc *p) { struct ch_softc *sc = ch_cd.cd_devs[CHUNIT(dev)]; int error = 0; /* * If this command can change the device's state, we must * have the device open for writing. */ switch (cmd) { case CHIOGPICKER: case CHIOGPARAMS: case CHIOGSTATUS: break; default: if (!ISSET(flags, FWRITE)) return EBADF; } switch (cmd) { case CHIOMOVE: error = ch_move(sc, (struct changer_move *)data); break; case CHIOEXCHANGE: error = ch_exchange(sc, (struct changer_exchange *)data); break; case CHIOPOSITION: error = ch_position(sc, (struct changer_position *)data); break; case CHIOGPICKER: *(int *)data = sc->sc_picker - sc->sc_firsts[CHET_MT]; break; case CHIOSPICKER: { int new_picker = *(int *)data; if (new_picker > (sc->sc_counts[CHET_MT] - 1)) return EINVAL; sc->sc_picker = sc->sc_firsts[CHET_MT] + new_picker; break; } case CHIOGPARAMS: { struct changer_params *cp = (struct changer_params *)data; cp->cp_curpicker = sc->sc_picker - sc->sc_firsts[CHET_MT]; cp->cp_npickers = sc->sc_counts[CHET_MT]; cp->cp_nslots = sc->sc_counts[CHET_ST]; cp->cp_nportals = sc->sc_counts[CHET_IE]; cp->cp_ndrives = sc->sc_counts[CHET_DT]; break; } case CHIOGSTATUS: { struct changer_element_status_request *cesr = (struct changer_element_status_request *)data; error = ch_usergetelemstatus(sc, cesr); break; } /* Implement prevent/allow? */ default: error = scsi_do_ioctl(sc->sc_link, cmd, data, flags); break; } return error; } int ch_move(struct ch_softc *sc, struct changer_move *cm) { struct scsi_move_medium *cmd; struct scsi_xfer *xs; int error; u_int16_t fromelem, toelem; /* * Check arguments. */ if ((cm->cm_fromtype > CHET_DT) || (cm->cm_totype > CHET_DT)) return EINVAL; if ((cm->cm_fromunit > (sc->sc_counts[cm->cm_fromtype] - 1)) || (cm->cm_tounit > (sc->sc_counts[cm->cm_totype] - 1))) return ENODEV; /* * Check the request against the changer's capabilities. */ if ((sc->sc_movemask[cm->cm_fromtype] & (1 << cm->cm_totype)) == 0) return EINVAL; /* * Calculate the source and destination elements. */ fromelem = sc->sc_firsts[cm->cm_fromtype] + cm->cm_fromunit; toelem = sc->sc_firsts[cm->cm_totype] + cm->cm_tounit; /* * Build the SCSI command. */ xs = scsi_xs_get(sc->sc_link, 0); if (xs == NULL) return ENOMEM; xs->cmdlen = sizeof(*cmd); xs->retries = CHRETRIES; xs->timeout = 100000; cmd = (struct scsi_move_medium *)&xs->cmd; cmd->opcode = MOVE_MEDIUM; _lto2b(sc->sc_picker, cmd->tea); _lto2b(fromelem, cmd->src); _lto2b(toelem, cmd->dst); if (ISSET(cm->cm_flags, CM_INVERT)) SET(cmd->flags, MOVE_MEDIUM_INVERT); error = scsi_xs_sync(xs); scsi_xs_put(xs); return error; } int ch_exchange(struct ch_softc *sc, struct changer_exchange *ce) { struct scsi_exchange_medium *cmd; struct scsi_xfer *xs; int error; u_int16_t src, dst1, dst2; /* * Check arguments. */ if ((ce->ce_srctype > CHET_DT) || (ce->ce_fdsttype > CHET_DT) || (ce->ce_sdsttype > CHET_DT)) return EINVAL; if ((ce->ce_srcunit > (sc->sc_counts[ce->ce_srctype] - 1)) || (ce->ce_fdstunit > (sc->sc_counts[ce->ce_fdsttype] - 1)) || (ce->ce_sdstunit > (sc->sc_counts[ce->ce_sdsttype] - 1))) return ENODEV; /* * Check the request against the changer's capabilities. */ if (((sc->sc_exchangemask[ce->ce_srctype] & (1 << ce->ce_fdsttype)) == 0) || ((sc->sc_exchangemask[ce->ce_fdsttype] & (1 << ce->ce_sdsttype)) == 0)) return EINVAL; /* * Calculate the source and destination elements. */ src = sc->sc_firsts[ce->ce_srctype] + ce->ce_srcunit; dst1 = sc->sc_firsts[ce->ce_fdsttype] + ce->ce_fdstunit; dst2 = sc->sc_firsts[ce->ce_sdsttype] + ce->ce_sdstunit; /* * Build the SCSI command. */ xs = scsi_xs_get(sc->sc_link, 0); if (xs == NULL) return ENOMEM; xs->cmdlen = sizeof(*cmd); xs->retries = CHRETRIES; xs->timeout = 100000; cmd = (struct scsi_exchange_medium *)&xs->cmd; cmd->opcode = EXCHANGE_MEDIUM; _lto2b(sc->sc_picker, cmd->tea); _lto2b(src, cmd->src); _lto2b(dst1, cmd->fdst); _lto2b(dst2, cmd->sdst); if (ISSET(ce->ce_flags, CE_INVERT1)) SET(cmd->flags, EXCHANGE_MEDIUM_INV1); if (ISSET(ce->ce_flags, CE_INVERT2)) SET(cmd->flags, EXCHANGE_MEDIUM_INV2); error = scsi_xs_sync(xs); scsi_xs_put(xs); return error; } int ch_position(struct ch_softc *sc, struct changer_position *cp) { struct scsi_position_to_element *cmd; struct scsi_xfer *xs; int error; u_int16_t dst; /* * Check arguments. */ if (cp->cp_type > CHET_DT) return EINVAL; if (cp->cp_unit > (sc->sc_counts[cp->cp_type] - 1)) return ENODEV; /* * Calculate the destination element. */ dst = sc->sc_firsts[cp->cp_type] + cp->cp_unit; /* * Build the SCSI command. */ xs = scsi_xs_get(sc->sc_link, 0); if (xs == NULL) return ENOMEM; xs->cmdlen = sizeof(*cmd); xs->retries = CHRETRIES; xs->timeout = 100000; cmd = (struct scsi_position_to_element *)&xs->cmd; cmd->opcode = POSITION_TO_ELEMENT; _lto2b(sc->sc_picker, cmd->tea); _lto2b(dst, cmd->dst); if (ISSET(cp->cp_flags, CP_INVERT)) SET(cmd->flags, POSITION_TO_ELEMENT_INVERT); error = scsi_xs_sync(xs); scsi_xs_put(xs); return error; } /* * Copy a volume tag to a volume_tag struct, converting SCSI byte order * to host native byte order in the volume serial number. The volume * label as returned by the changer is transferred to user mode as * nul-terminated string. Volume labels are truncated at the first * space, as suggested by SCSI-2. */ static void copy_voltag(struct changer_voltag *uvoltag, struct volume_tag *voltag) { int i; for (i=0; ivif[i]; if (c && c != ' ') uvoltag->cv_volid[i] = c; else break; } uvoltag->cv_volid[i] = '\0'; uvoltag->cv_serial = _2btol(voltag->vsn); } /* * Copy an an element status descriptor to a user-mode * changer_element_status structure. */ static void copy_element_status(struct ch_softc *sc, int flags, struct read_element_status_descriptor *desc, struct changer_element_status *ces) { u_int16_t eaddr = _2btol(desc->eaddr); u_int16_t et; for (et = CHET_MT; et <= CHET_DT; et++) { if ((sc->sc_firsts[et] <= eaddr) && ((sc->sc_firsts[et] + sc->sc_counts[et]) > eaddr)) { ces->ces_addr = eaddr - sc->sc_firsts[et]; ces->ces_type = et; break; } } ces->ces_flags = desc->flags1; ces->ces_sensecode = desc->sense_code; ces->ces_sensequal = desc->sense_qual; if (desc->flags2 & READ_ELEMENT_STATUS_INVERT) ces->ces_flags |= READ_ELEMENT_STATUS_EXCEPT; if (desc->flags2 & READ_ELEMENT_STATUS_SVALID) { eaddr = _2btol(desc->ssea); /* convert source address to logical format */ for (et = CHET_MT; et <= CHET_DT; et++) { if ((sc->sc_firsts[et] <= eaddr) && ((sc->sc_firsts[et] + sc->sc_counts[et]) > eaddr)) { ces->ces_source_addr = eaddr - sc->sc_firsts[et]; ces->ces_source_type = et; ces->ces_flags |= READ_ELEMENT_STATUS_ACCESS; break; } } if (!(ces->ces_flags & READ_ELEMENT_STATUS_ACCESS)) printf("ch: warning: could not map element source " "address %ud to a valid element type\n", eaddr); } if (ISSET(flags, READ_ELEMENT_STATUS_PVOLTAG)) copy_voltag(&ces->ces_pvoltag, &desc->pvoltag); if (ISSET(flags, READ_ELEMENT_STATUS_AVOLTAG)) copy_voltag(&ces->ces_avoltag, &desc->avoltag); } /* * Perform a READ ELEMENT STATUS on behalf of the user, and return to * the user only the data the user is interested in (i.e. an array of * changer_element_status structures) */ int ch_usergetelemstatus(struct ch_softc *sc, struct changer_element_status_request *cesr) { struct changer_element_status *user_data = NULL; struct read_element_status_header *st_hdr; struct read_element_status_page_header *pg_hdr; caddr_t desc; caddr_t data = NULL; size_t size, desclen, udsize; int avail, chet, i, want_voltags; int error = 0; chet = cesr->cesr_type; want_voltags = (cesr->cesr_flags & CESR_VOLTAGS) ? 1 : 0; /* * If there are no elements of the requested type in the changer, * the request is invalid. */ if (sc->sc_counts[chet] == 0) return EINVAL; /* * Request one descriptor for the given element type. This * is used to determine the size of the descriptor so that * we can allocate enough storage for all of them. We assume * that the first one can fit into 1k. */ size = 1024; data = dma_alloc(size, PR_WAITOK); error = ch_getelemstatus(sc, sc->sc_firsts[chet], 1, data, size, want_voltags); if (error) goto done; st_hdr = (struct read_element_status_header *)data; pg_hdr = (struct read_element_status_page_header *) (st_hdr + 1); desclen = _2btol(pg_hdr->edl); dma_free(data, size); /* * Reallocate storage for descriptors and get them from the * device. */ size = sizeof(struct read_element_status_header) + sizeof(struct read_element_status_page_header) + (desclen * sc->sc_counts[chet]); data = dma_alloc(size, PR_WAITOK); error = ch_getelemstatus(sc, sc->sc_firsts[chet], sc->sc_counts[chet], data, size, want_voltags); if (error) goto done; /* * Fill in the user status array. */ st_hdr = (struct read_element_status_header *)data; pg_hdr = (struct read_element_status_page_header *) (st_hdr + 1); avail = _2btol(st_hdr->count); if (avail != sc->sc_counts[chet]) { error = EINVAL; goto done; } user_data = mallocarray(avail, sizeof(struct changer_element_status), M_DEVBUF, M_WAITOK | M_ZERO); udsize = avail * sizeof(struct changer_element_status); desc = (caddr_t)(pg_hdr + 1); for (i = 0; i < avail; ++i) { struct changer_element_status *ces = &(user_data[i]); copy_element_status(sc, pg_hdr->flags, (struct read_element_status_descriptor *)desc, ces); desc += desclen; } /* Copy array out to userspace. */ error = copyout(user_data, cesr->cesr_data, udsize); done: if (data != NULL) dma_free(data, size); if (user_data != NULL) free(user_data, M_DEVBUF, udsize); return error; } int ch_getelemstatus(struct ch_softc *sc, int first, int count, caddr_t data, size_t datalen, int voltag) { struct scsi_read_element_status *cmd; struct scsi_xfer *xs; int error; /* * Build SCSI command. */ xs = scsi_xs_get(sc->sc_link, SCSI_DATA_IN); if (xs == NULL) return ENOMEM; xs->cmdlen = sizeof(*cmd); xs->data = data; xs->datalen = datalen; xs->retries = CHRETRIES; xs->timeout = 100000; cmd = (struct scsi_read_element_status *)&xs->cmd; cmd->opcode = READ_ELEMENT_STATUS; _lto2b(first, cmd->sea); _lto2b(count, cmd->count); _lto3b(datalen, cmd->len); if (voltag) SET(cmd->byte2, READ_ELEMENT_STATUS_VOLTAG); error = scsi_xs_sync(xs); scsi_xs_put(xs); return error; } /* * Ask the device about itself and fill in the parameters in our * softc. */ int ch_get_params(struct ch_softc *sc, int flags) { union scsi_mode_sense_buf *data; struct page_element_address_assignment *ea; struct page_device_capabilities *cap; u_int8_t *moves, *exchanges; int big, error, from; data = dma_alloc(sizeof(*data), PR_NOWAIT); if (data == NULL) return ENOMEM; /* * Grab info from the element address assignment page (0x1d). */ error = scsi_do_mode_sense(sc->sc_link, EA_PAGE, data, (void **)&ea, sizeof(*ea), flags, &big); if (error == 0 && ea == NULL) error = EIO; if (error != 0) { #ifdef CHANGER_DEBUG printf("%s: could not sense element address page\n", sc->sc_dev.dv_xname); #endif /* CHANGER_DEBUG */ dma_free(data, sizeof(*data)); return error; } sc->sc_firsts[CHET_MT] = _2btol(ea->mtea); sc->sc_counts[CHET_MT] = _2btol(ea->nmte); sc->sc_firsts[CHET_ST] = _2btol(ea->fsea); sc->sc_counts[CHET_ST] = _2btol(ea->nse); sc->sc_firsts[CHET_IE] = _2btol(ea->fieea); sc->sc_counts[CHET_IE] = _2btol(ea->niee); sc->sc_firsts[CHET_DT] = _2btol(ea->fdtea); sc->sc_counts[CHET_DT] = _2btol(ea->ndte); /* XXX Ask for transport geometry page. */ /* * Grab info from the capabilities page (0x1f). */ error = scsi_do_mode_sense(sc->sc_link, CAP_PAGE, data, (void **)&cap, sizeof(*cap), flags, &big); if (error == 0 && cap == NULL) error = EIO; if (error != 0) { #ifdef CHANGER_DEBUG printf("%s: could not sense capabilities page\n", sc->sc_dev.dv_xname); #endif /* CHANGER_DEBUG */ dma_free(data, sizeof(*data)); return error; } bzero(sc->sc_movemask, sizeof(sc->sc_movemask)); bzero(sc->sc_exchangemask, sizeof(sc->sc_exchangemask)); moves = &cap->move_from_mt; exchanges = &cap->exchange_with_mt; for (from = CHET_MT; from <= CHET_DT; ++from) { sc->sc_movemask[from] = moves[from]; sc->sc_exchangemask[from] = exchanges[from]; } SET(sc->sc_link->flags, SDEV_MEDIA_LOADED); dma_free(data, sizeof(*data)); return 0; } void ch_get_quirks(struct ch_softc *sc, struct scsi_inquiry_data *inqbuf) { const struct chquirk *match; int priority; sc->sc_settledelay = 0; match = (const struct chquirk *)scsi_inqmatch(inqbuf, (caddr_t)chquirks, sizeof(chquirks) / sizeof(chquirks[0]), sizeof(chquirks[0]), &priority); if (priority != 0) { sc->sc_settledelay = match->cq_settledelay; } } /* * Look at the returned sense and act on the error to determine * the unix error number to pass back... (0 = report no error) * (-1 = continue processing) */ int ch_interpret_sense(struct scsi_xfer *xs) { struct scsi_sense_data *sense = &xs->sense; struct scsi_link *link = xs->sc_link; u_int8_t serr, skey; serr = sense->error_code & SSD_ERRCODE; skey = sense->flags & SSD_KEY; if (!ISSET(link->flags, SDEV_OPEN) || (serr != SSD_ERRCODE_CURRENT && serr != SSD_ERRCODE_DEFERRED)) return scsi_interpret_sense(xs); switch (skey) { /* * We do custom processing in ch for the unit becoming ready * case. in this case we do not allow xs->retries to be * decremented only on the "Unit Becoming Ready" case. This is * because tape changers report "Unit Becoming Ready" when they * rescan their state (i.e. when the door got opened) and can * take a long time for large units. Rather than having a * massive timeout for all operations (which would cause other * problems) we allow changers to wait (but be interruptible * with Ctrl-C) forever as long as they are reporting that they * are becoming ready. all other cases are handled as per the * default. */ case SKEY_NOT_READY: if (ISSET(xs->flags, SCSI_IGNORE_NOT_READY)) return 0; switch (ASC_ASCQ(sense)) { case SENSE_NOT_READY_BECOMING_READY: SC_DEBUG(link, SDEV_DB1, ("not ready: busy (%#x)\n", sense->add_sense_code_qual)); /* don't count this as a retry */ xs->retries++; return scsi_delay(xs, 1); default: return scsi_interpret_sense(xs); } default: return scsi_interpret_sense(xs); } }