/* $OpenBSD: safte.h,v 1.3 2005/08/11 12:57:13 dlg Exp $ */ /* * Copyright (c) 2005 Daivd Gwynne * * Permission to use, copy, modify, and distribute this software for any * purpose with or without fee is hereby granted, provided that the above * copyright notice and this permission notice appear in all copies. * * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. */ #ifndef _SCSI_SAFTE_H_ #define _SCSI_SAFTE_H_ #define SAFTE_EXTRA_OFFSET 0x05 /* scsi_inquiry_data.extra */ struct safte_inq { u_int8_t uniqueid[7]; u_int8_t chanid; u_int8_t ident[6]; #define SAFTE_IDENT "SAF-TE" u_int8_t revision[4]; #ifdef notyet u_int8_t reserved[2]; #endif } __packed; #define SAFTE_INQ_LEN 54 struct safte_readbuf_cmd { u_int8_t opcode; /* READ_BUFFER */ u_int8_t flags; #define SAFTE_RD_LUNMASK 0xe0 /* the lun should always be 0 */ #define SAFTE_RD_MODEMASK 0x07 #define SAFTE_RD_MODE 0x01 /* 0x01 is the SAF-TE command mode */ u_int8_t bufferid; #define SAFTE_RD_CONFIG 0x00 /* enclosure configuration */ #define SAFTE_RD_ENCSTAT 0x01 /* enclosure status */ #define SAFTE_RD_USAGE 0x02 /* usage statistics */ #define SAFTE_RD_INSERTS 0x03 /* device insertions */ #define SAFTE_RD_SLOTSTAT 0x04 /* slot status */ #define SAFTE_RD_GLOBALS 0x05 /* global flags */ u_int32_t reserved1; u_int16_t length; /* transfer length (big endian) */ u_int8_t reserved2; } __packed; #define SAFTE_WRITE_SLOTSTAT 0x10 /* write device slot status */ #define SAFTE_WRITE_SETID 0x11 /* set scsi id */ #define SAFTE_WRITE_SLOTOP 0x12 /* perform slot operation */ #define SAFTE_WRITE_FANSPEED 0x13 /* set fan speed */ #define SAFTE_WRITE_PWRSUP 0x14 /* activate power supply */ #define SAFTE_WRITE_GLOBALS 0x15 /* global flags */ /* enclosure configuration */ struct safte_config { u_int8_t nfans; /* number of fans */ u_int8_t npwrsup; /* number of power supplies */ u_int8_t nslots; /* number of device slots */ u_int8_t doorlock; /* door lock installed */ u_int8_t ntemps; /* number of temp sensors */ u_int8_t alarm; /* audible alarm installed */ u_int8_t therm; /* temps in C and num of thermostats */ #define SAFTE_CFG_CELSIUSMASK 0x80 #define SAFTE_CFG_CELSIUS(a) ((a) & SAFTE_CFG_CELSIUSMASK ? 1 : 0) #define SAFTE_CFG_NTHERMMASK 0x0f #define SAFTE_CFG_NTHERM(a) ((a) & SAFTE_CFG_NTHERMMASK) u_int8_t reserved[56]; /* 7 to 62 */ u_int8_t vendor_bytes; /* number of vendor specific bytes */ } __packed; #define SAFTE_CONFIG_LEN sizeof(struct safte_config) /* enclosure status fields */ /* fan status field */ #define SAFTE_FAN_OP 0x00 /* operational */ #define SAFTE_FAN_MF 0x01 /* malfunctioning */ #define SAFTE_FAN_NOTINST 0x02 /* not installed */ #define SAFTE_FAN_UNKNOWN 0x80 /* unknown status or unreportable */ /* power supply status field */ #define SAFTE_PWR_OP_ON 0x00 /* operational and on */ #define SAFTE_PWR_OP_OFF 0x01 /* operational and off */ #define SAFTE_PWR_MF_ON 0x10 /* malfunctioning and on */ #define SAFTE_PWR_MF_OFF 0x11 /* malfunctioning and off */ #define SAFTE_PWR_NOTINST 0x20 /* not present */ #define SAFTE_PWR_PRESENT 0x21 /* present */ #define SAFTE_PWR_UNKNOWN 0x80 /* unknown status or unreportable */ /* scsi id fields */ /* are integers, not bitfields */ /* door lock status */ #define SAFTE_DOOR_LOCKED 0x00 /* locked */ #define SAFTE_DOOR_UNLOCKED 0x01 /* unlocked or uncontrollable */ #define SAFTE_DOOR_UNKNOWN 0x80 /* unknown status or unreportable */ /* speaker status */ #define SAFTE_SPKR_OFF 0x00 /* off or not installed */ #define SAFTE_SPKR_ON 0x01 /* speaker is currently on */ /* temperature */ #define SAFTE_TEMP_OFFSET -10 /* -10 to 245 degrees */ /* temp out of range */ #define SAFTE_TEMP_ETA 0x8000 /* any temp alert */ /* usage statistics */ struct safte_usage { u_int32_t minutes; /* total number of minutes on */ u_int32_t cycles; /* total number of power cycles */ u_int8_t reserved[7]; u_int8_t vendor_bytes; /* number of vendor specific bytes */ }; /* device insertions */ /* u_int16_t * nslots */ /* device slot status */ #define SAFTE_SLOTSTAT_INSERT (1<<0) /* inserted */ #define SAFTE_SLOTSTAT_SWAP (1<<1) /* ready to be inserted/removed */ #define SAFTE_SLOTSTAT_OPER (1<<2) /* ready for operation */ /* global flags */ struct safte_globals { u_int8_t flags1; #define SAFTE_GLOBAL_ALARM (1<<0) /* audible alarm */ #define SAFTE_GLOBAL_FAILURE (1<<1) /* global failure indication */ #define SAFTE_GLOBAL_WARNING (1<<2) /* global warning indication */ #define SAFTE_GLOBAL_POWER (1<<3) /* enclosure power */ #define SAFTE_GLOBAL_COOLING (1<<4) /* cooling failure */ #define SAFTE_GLOBAL_PWRFAIL (1<<5) /* power failture */ #define SAFTE_GLOBAL_DRVFAIL (1<<6) /* drive failure */ #define SAFTE_GLOBAL_DRVWARN (1<<6) /* drive warning */ u_int8_t flags2; #define SAFTE_GLOBAL_ARRAYFAIL (1<<0) /* array failure */ #define SAFTE_GLOBAL_ARRAYWARN (1<<1) /* array warning */ #define SAFTE_GLOBAL_LOCK (1<<2) /* enclosure lock */ #define SAFTE_GLOBAL_IDENTIFY (1<<3) /* identify enclosure */ u_int8_t flags3; u_int8_t reserved[13]; }; #endif /* _SCSI_SAFTE_H_ */