/* $OpenBSD: scsi_base.c,v 1.7 1996/04/21 22:30:50 deraadt Exp $ */ /* $NetBSD: scsi_base.c,v 1.34 1996/03/19 03:06:28 mycroft Exp $ */ /* * Copyright (c) 1994, 1995 Charles Hannum. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by Charles Hannum. * 4. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ /* * Originally written by Julian Elischer (julian@dialix.oz.au) */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include void scsi_error __P((struct scsi_xfer *, int)); LIST_HEAD(xs_free_list, scsi_xfer) xs_free_list; static __inline struct scsi_xfer *scsi_make_xs __P((struct scsi_link *, struct scsi_generic *, int cmdlen, u_char *data_addr, int datalen, int retries, int timeout, struct buf *, int flags)); int sc_err1 __P((struct scsi_xfer *, int)); int scsi_interpret_sense __P((struct scsi_xfer *)); /* * Get a scsi transfer structure for the caller. Charge the structure * to the device that is referenced by the sc_link structure. If the * sc_link structure has no 'credits' then the device already has the * maximum number or outstanding operations under way. In this stage, * wait on the structure so that when one is freed, we are awoken again * If the SCSI_NOSLEEP flag is set, then do not wait, but rather, return * a NULL pointer, signifying that no slots were available * Note in the link structure, that we are waiting on it. */ struct scsi_xfer * scsi_get_xs(sc_link, flags) struct scsi_link *sc_link; /* who to charge the xs to */ int flags; /* if this call can sleep */ { struct scsi_xfer *xs; int s; SC_DEBUG(sc_link, SDEV_DB3, ("scsi_get_xs\n")); s = splbio(); while (sc_link->openings <= 0) { SC_DEBUG(sc_link, SDEV_DB3, ("sleeping\n")); if ((flags & SCSI_NOSLEEP) != 0) { splx(s); return 0; } sc_link->flags |= SDEV_WAITING; (void) tsleep(sc_link, PRIBIO, "getxs", 0); } sc_link->openings--; if ((xs = xs_free_list.lh_first) != NULL) { LIST_REMOVE(xs, free_list); splx(s); } else { splx(s); SC_DEBUG(sc_link, SDEV_DB3, ("making\n")); xs = malloc(sizeof(*xs), M_DEVBUF, ((flags & SCSI_NOSLEEP) != 0 ? M_NOWAIT : M_WAITOK)); if (!xs) { sc_print_addr(sc_link); printf("cannot allocate scsi xs\n"); return 0; } } SC_DEBUG(sc_link, SDEV_DB3, ("returning\n")); xs->flags = INUSE | flags; return xs; } /* * Given a scsi_xfer struct, and a device (referenced through sc_link) * return the struct to the free pool and credit the device with it * If another process is waiting for an xs, do a wakeup, let it proceed */ void scsi_free_xs(xs, flags) struct scsi_xfer *xs; int flags; { struct scsi_link *sc_link = xs->sc_link; xs->flags &= ~INUSE; LIST_INSERT_HEAD(&xs_free_list, xs, free_list); SC_DEBUG(sc_link, SDEV_DB3, ("scsi_free_xs\n")); /* if was 0 and someone waits, wake them up */ sc_link->openings++; if ((sc_link->flags & SDEV_WAITING) != 0) { sc_link->flags &= ~SDEV_WAITING; wakeup(sc_link); } else { if (sc_link->device->start) { SC_DEBUG(sc_link, SDEV_DB2, ("calling private start()\n")); (*(sc_link->device->start)) (sc_link->device_softc); } } } /* * Make a scsi_xfer, and return a pointer to it. */ static __inline struct scsi_xfer * scsi_make_xs(sc_link, scsi_cmd, cmdlen, data_addr, datalen, retries, timeout, bp, flags) struct scsi_link *sc_link; struct scsi_generic *scsi_cmd; int cmdlen; u_char *data_addr; int datalen; int retries; int timeout; struct buf *bp; int flags; { struct scsi_xfer *xs; if ((xs = scsi_get_xs(sc_link, flags)) == NULL) return NULL; /* * Fill out the scsi_xfer structure. We don't know whose context * the cmd is in, so copy it. */ xs->sc_link = sc_link; bcopy(scsi_cmd, &xs->cmdstore, cmdlen); xs->cmd = &xs->cmdstore; xs->cmdlen = cmdlen; xs->data = data_addr; xs->datalen = datalen; xs->retries = retries; xs->timeout = timeout; xs->bp = bp; return xs; } /* * Find out from the device what its capacity is. */ u_long scsi_size(sc_link, flags) struct scsi_link *sc_link; int flags; { struct scsi_read_cap_data rdcap; struct scsi_read_capacity scsi_cmd; /* * make up a scsi command and ask the scsi driver to do * it for you. */ bzero(&scsi_cmd, sizeof(scsi_cmd)); scsi_cmd.opcode = READ_CAPACITY; /* * If the command works, interpret the result as a 4 byte * number of blocks */ if (scsi_scsi_cmd(sc_link, (struct scsi_generic *)&scsi_cmd, sizeof(scsi_cmd), (u_char *)&rdcap, sizeof(rdcap), 2, 20000, NULL, flags | SCSI_DATA_IN) != 0) { sc_print_addr(sc_link); printf("could not get size\n"); return 0; } return _4btol(rdcap.addr) + 1; } /* * Get scsi driver to send a "are you ready?" command */ int scsi_test_unit_ready(sc_link, flags) struct scsi_link *sc_link; int flags; { struct scsi_test_unit_ready scsi_cmd; bzero(&scsi_cmd, sizeof(scsi_cmd)); scsi_cmd.opcode = TEST_UNIT_READY; return scsi_scsi_cmd(sc_link, (struct scsi_generic *) &scsi_cmd, sizeof(scsi_cmd), 0, 0, 2, 10000, NULL, flags); } /* * Do a scsi operation, asking a device to run as SCSI-II if it can. */ int scsi_change_def(sc_link, flags) struct scsi_link *sc_link; int flags; { struct scsi_changedef scsi_cmd; bzero(&scsi_cmd, sizeof(scsi_cmd)); scsi_cmd.opcode = CHANGE_DEFINITION; scsi_cmd.how = SC_SCSI_2; return scsi_scsi_cmd(sc_link, (struct scsi_generic *) &scsi_cmd, sizeof(scsi_cmd), 0, 0, 2, 100000, NULL, flags); } /* * Do a scsi operation asking a device what it is * Use the scsi_cmd routine in the switch table. */ int scsi_inquire(sc_link, inqbuf, flags) struct scsi_link *sc_link; struct scsi_inquiry_data *inqbuf; int flags; { struct scsi_inquiry scsi_cmd; bzero(&scsi_cmd, sizeof(scsi_cmd)); scsi_cmd.opcode = INQUIRY; scsi_cmd.length = sizeof(struct scsi_inquiry_data); return scsi_scsi_cmd(sc_link, (struct scsi_generic *) &scsi_cmd, sizeof(scsi_cmd), (u_char *) inqbuf, sizeof(struct scsi_inquiry_data), 2, 10000, NULL, SCSI_DATA_IN | flags); } /* * Prevent or allow the user to remove the media */ int scsi_prevent(sc_link, type, flags) struct scsi_link *sc_link; int type, flags; { struct scsi_prevent scsi_cmd; bzero(&scsi_cmd, sizeof(scsi_cmd)); scsi_cmd.opcode = PREVENT_ALLOW; scsi_cmd.how = type; return scsi_scsi_cmd(sc_link, (struct scsi_generic *) &scsi_cmd, sizeof(scsi_cmd), 0, 0, 2, 5000, NULL, flags); } /* * Get scsi driver to send a "start up" command */ int scsi_start(sc_link, type, flags) struct scsi_link *sc_link; int type, flags; { struct scsi_start_stop scsi_cmd; bzero(&scsi_cmd, sizeof(scsi_cmd)); scsi_cmd.opcode = START_STOP; scsi_cmd.byte2 = 0x00; scsi_cmd.how = type; return scsi_scsi_cmd(sc_link, (struct scsi_generic *) &scsi_cmd, sizeof(scsi_cmd), 0, 0, 2, type == SSS_START ? 30000 : 10000, NULL, flags); } /* * This routine is called by the scsi interrupt when the transfer is complete. */ void scsi_done(xs) struct scsi_xfer *xs; { struct scsi_link *sc_link = xs->sc_link; int error; SC_DEBUG(sc_link, SDEV_DB2, ("scsi_done\n")); #ifdef SCSIDEBUG if ((sc_link->flags & SDEV_DB1) != 0) show_scsi_cmd(xs); #endif /* SCSIDEBUG */ /* * If it's a user level request, bypass all usual completion processing, * let the user work it out.. We take reponsibility for freeing the * xs when the user returns. (and restarting the device's queue). */ if ((xs->flags & SCSI_USER) != 0) { SC_DEBUG(sc_link, SDEV_DB3, ("calling user done()\n")); scsi_user_done(xs); /* to take a copy of the sense etc. */ SC_DEBUG(sc_link, SDEV_DB3, ("returned from user done()\n ")); scsi_free_xs(xs, SCSI_NOSLEEP); /* restarts queue too */ SC_DEBUG(sc_link, SDEV_DB3, ("returning to adapter\n")); return; } /* * If the device has it's own done routine, call it first. * If it returns a legit error value, return that, otherwise * it wants us to continue with normal processing. * * Make sure the upper-level driver knows that this might not * actually be the last time they hear from us. We need to get * status back. */ if (sc_link->device->done) { SC_DEBUG(sc_link, SDEV_DB2, ("calling private done()\n")); error = (*sc_link->device->done)(xs, 0); if (error == EJUSTRETURN) goto done; SC_DEBUG(sc_link, SDEV_DB3, ("continuing with generic done()\n")); } if (xs->bp == NULL) { /* * if it's a normal upper level request, then ask * the upper level code to handle error checking * rather than doing it here at interrupt time */ wakeup(xs); return; } /* * Go and handle errors now. * If it returns ERESTART then we should RETRY */ retry: if (sc_err1(xs, 1) == ERESTART) { switch ((*(sc_link->adapter->scsi_cmd)) (xs)) { case SUCCESSFULLY_QUEUED: return; case TRY_AGAIN_LATER: xs->error = XS_BUSY; case COMPLETE: goto retry; } } done: if (sc_link->device->done) { /* * Tell the device the operation is actually complete. * No more will happen with this xfer. This for * notification of the upper-level driver only; they * won't be returning any meaningful information to us. */ (void)(*sc_link->device->done)(xs, 1); } scsi_free_xs(xs, SCSI_NOSLEEP); } int scsi_execute_xs(xs) struct scsi_xfer *xs; { int error; int s; xs->flags &= ~ITSDONE; xs->error = XS_NOERROR; xs->resid = xs->datalen; retry: /* * Do the transfer. If we are polling we will return: * COMPLETE, Was poll, and scsi_done has been called * TRY_AGAIN_LATER, Adapter short resources, try again * * if under full steam (interrupts) it will return: * SUCCESSFULLY_QUEUED, will do a wakeup when complete * TRY_AGAIN_LATER, (as for polling) * After the wakeup, we must still check if it succeeded * * If we have a bp however, all the error processing * and the buffer code both expect us to return straight * to them, so as soon as the command is queued, return */ switch ((*(xs->sc_link->adapter->scsi_cmd)) (xs)) { case SUCCESSFULLY_QUEUED: if (xs->bp) return EJUSTRETURN; s = splbio(); while ((xs->flags & ITSDONE) == 0) tsleep(xs, PRIBIO + 1, "scsi_scsi_cmd", 0); splx(s); case COMPLETE: /* Polling command completed ok */ if (xs->bp) return EJUSTRETURN; doit: SC_DEBUG(xs->sc_link, SDEV_DB3, ("back in cmd()\n")); if ((error = sc_err1(xs, 0)) != ERESTART) return error; goto retry; case TRY_AGAIN_LATER: /* adapter resource shortage */ xs->error = XS_BUSY; goto doit; default: panic("scsi_execute_xs: invalid return code"); } #ifdef DIAGNOSTIC panic("scsi_execute_xs: impossible"); #endif return EINVAL; } /* * ask the scsi driver to perform a command for us. * tell it where to read/write the data, and how * long the data is supposed to be. If we have a buf * to associate with the transfer, we need that too. */ int scsi_scsi_cmd(sc_link, scsi_cmd, cmdlen, data_addr, datalen, retries, timeout, bp, flags) struct scsi_link *sc_link; struct scsi_generic *scsi_cmd; int cmdlen; u_char *data_addr; int datalen; int retries; int timeout; struct buf *bp; int flags; { struct scsi_xfer *xs; int error; SC_DEBUG(sc_link, SDEV_DB2, ("scsi_cmd\n")); #ifdef DIAGNOSTIC if (bp != 0 && (flags & SCSI_NOSLEEP) == 0) panic("scsi_scsi_cmd: buffer without nosleep"); #endif if ((xs = scsi_make_xs(sc_link, scsi_cmd, cmdlen, data_addr, datalen, retries, timeout, bp, flags)) == NULL) return ENOMEM; if ((error = scsi_execute_xs(xs)) == EJUSTRETURN) return 0; /* * we have finished with the xfer stuct, free it and * check if anyone else needs to be started up. */ scsi_free_xs(xs, flags); return error; } int sc_err1(xs, async) struct scsi_xfer *xs; int async; { int error; SC_DEBUG(xs->sc_link, SDEV_DB3, ("sc_err1,err = 0x%x \n", xs->error)); /* * If it has a buf, we might be working with * a request from the buffer cache or some other * piece of code that requires us to process * errors at inetrrupt time. We have probably * been called by scsi_done() */ switch (xs->error) { case XS_NOERROR: /* nearly always hit this one */ error = 0; break; case XS_SENSE: if ((error = scsi_interpret_sense(xs)) == ERESTART) goto retry; SC_DEBUG(xs->sc_link, SDEV_DB3, ("scsi_interpret_sense returned %d\n", error)); break; case XS_BUSY: if (xs->retries) { if ((xs->flags & SCSI_POLL) != 0) delay(1000000); else if ((xs->flags & SCSI_NOSLEEP) == 0) tsleep(&lbolt, PRIBIO, "scbusy", 0); else #if 0 timeout(scsi_requeue, xs, hz); #else goto lose; #endif } case XS_TIMEOUT: retry: if (xs->retries--) { xs->error = XS_NOERROR; xs->flags &= ~ITSDONE; return ERESTART; } case XS_DRIVER_STUFFUP: lose: error = EIO; break; case XS_SELTIMEOUT: /* XXX Disable device? */ error = EIO; break; default: sc_print_addr(xs->sc_link); printf("unknown error category from scsi driver\n"); error = EIO; break; } scsi_error(xs, error); return error; } void scsi_error(xs, error) struct scsi_xfer *xs; int error; { struct buf *bp = xs->bp; if (bp) { if (error) { bp->b_error = error; bp->b_flags |= B_ERROR; bp->b_resid = bp->b_bcount; } else { bp->b_error = 0; bp->b_resid = xs->resid; } biodone(bp); } } /* * Look at the returned sense and act on the error, determining * the unix error number to pass back. (0 = report no error) * * THIS IS THE DEFAULT ERROR HANDLER */ int scsi_interpret_sense(xs) struct scsi_xfer *xs; { struct scsi_sense_data *sense; struct scsi_link *sc_link = xs->sc_link; u_int8_t key; u_int32_t info; int error; static char *error_mes[] = { "soft error (corrected)", "not ready", "medium error", "non-media hardware failure", "illegal request", "unit attention", "readonly device", "no data found", "vendor unique", "copy aborted", "command aborted", "search returned equal", "volume overflow", "verify miscompare", "unknown error key" }; sense = &xs->sense; #ifdef SCSIDEBUG if ((sc_link->flags & SDEV_DB1) != 0) { int count; printf("code%x valid%x ", sense->error_code & SSD_ERRCODE, sense->error_code & SSD_ERRCODE_VALID ? 1 : 0); printf("seg%x key%x ili%x eom%x fmark%x\n", sense->segment, sense->flags & SSD_KEY, sense->flags & SSD_ILI ? 1 : 0, sense->flags & SSD_EOM ? 1 : 0, sense->flags & SSD_FILEMARK ? 1 : 0); printf("info: %x %x %x %x followed by %d extra bytes\n", sense->info[0], sense->info[1], sense->info[2], sense->info[3], sense->extra_len); printf("extra: "); for (count = 0; count < sense->extra_len; count++) printf("%x ", sense->extra_bytes[count]); printf("\n"); } #endif /*SCSIDEBUG */ /* * If the device has it's own error handler, call it first. * If it returns a legit error value, return that, otherwise * it wants us to continue with normal error processing. */ if (sc_link->device->err_handler) { SC_DEBUG(sc_link, SDEV_DB2, ("calling private err_handler()\n")); error = (*sc_link->device->err_handler) (xs); if (error != -1) return error; /* error >= 0 better ? */ } /* otherwise use the default */ switch (sense->error_code & SSD_ERRCODE) { /* * If it's code 70, use the extended stuff and interpret the key */ case 0x71: /* delayed error */ sc_print_addr(sc_link); key = sense->flags & SSD_KEY; printf(" DELAYED ERROR, key = 0x%x\n", key); case 0x70: if ((sense->error_code & SSD_ERRCODE_VALID) != 0) info = _4btol(sense->info); else info = 0; key = sense->flags & SSD_KEY; switch (key) { case 0x0: /* NO SENSE */ case 0x1: /* RECOVERED ERROR */ if (xs->resid == xs->datalen) xs->resid = 0; /* not short read */ case 0xc: /* EQUAL */ error = 0; break; case 0x2: /* NOT READY */ if ((sc_link->flags & SDEV_REMOVABLE) != 0) sc_link->flags &= ~SDEV_MEDIA_LOADED; if ((xs->flags & SCSI_IGNORE_NOT_READY) != 0) return 0; if (xs->retries && !(sc_link->flags & SDEV_REMOVABLE)) { delay(1000000); return ERESTART; } if ((xs->flags & SCSI_SILENT) != 0) return EIO; error = EIO; break; case 0x5: /* ILLEGAL REQUEST */ if ((xs->flags & SCSI_IGNORE_ILLEGAL_REQUEST) != 0) return 0; error = EINVAL; break; case 0x6: /* UNIT ATTENTION */ if ((sc_link->flags & SDEV_REMOVABLE) != 0) sc_link->flags &= ~SDEV_MEDIA_LOADED; if ((xs->flags & SCSI_IGNORE_MEDIA_CHANGE) != 0 || /* XXX Should reupload any transient state. */ (sc_link->flags & SDEV_REMOVABLE) == 0) return ERESTART; if ((xs->flags & SCSI_SILENT) != 0) return EIO; error = EIO; break; case 0x7: /* DATA PROTECT */ error = EACCES; break; case 0x8: /* BLANK CHECK */ error = 0; break; case 0xb: /* COMMAND ABORTED */ error = ERESTART; break; case 0xd: /* VOLUME OVERFLOW */ error = ENOSPC; break; default: error = EIO; break; } if (key) { sc_print_addr(sc_link); printf("%s", error_mes[key - 1]); if ((sense->error_code & SSD_ERRCODE_VALID) != 0) { switch (key) { case 0x2: /* NOT READY */ case 0x5: /* ILLEGAL REQUEST */ case 0x6: /* UNIT ATTENTION */ case 0x7: /* DATA PROTECT */ break; case 0x8: /* BLANK CHECK */ printf(", requested size: %d (decimal)", info); break; case 0xb: /* COMMAND ABORTED */ if (xs->retries) printf(", retrying"); printf(", cmd 0x%x, info 0x%x", xs->cmd->opcode, info); break; default: printf(", info = %d (decimal)", info); } } if (sense->extra_len != 0) { int n; printf(", data ="); for (n = 0; n < sense->extra_len; n++) printf(" %02x", sense->extra_bytes[n]); } printf("\n"); } return error; /* * Not code 70, just report it */ default: sc_print_addr(sc_link); printf("error code %d", sense->error_code & SSD_ERRCODE); if ((sense->error_code & SSD_ERRCODE_VALID) != 0) { struct scsi_sense_data_unextended *usense = (struct scsi_sense_data_unextended *)sense; printf(" at block no. %d (decimal)", _3btol(usense->block)); } printf("\n"); return EIO; } } /* * Utility routines often used in SCSI stuff */ /* * Print out the scsi_link structure's address info. */ void sc_print_addr(sc_link) struct scsi_link *sc_link; { printf("%s(%s:%d:%d): ", sc_link->device_softc ? ((struct device *)sc_link->device_softc)->dv_xname : "probe", ((struct device *)sc_link->adapter_softc)->dv_xname, sc_link->target, sc_link->lun); } #ifdef SCSIDEBUG /* * Given a scsi_xfer, dump the request, in all it's glory */ void show_scsi_xs(xs) struct scsi_xfer *xs; { printf("xs(0x%x): ", xs); printf("flg(0x%x)", xs->flags); printf("sc_link(0x%x)", xs->sc_link); printf("retr(0x%x)", xs->retries); printf("timo(0x%x)", xs->timeout); printf("cmd(0x%x)", xs->cmd); printf("len(0x%x)", xs->cmdlen); printf("data(0x%x)", xs->data); printf("len(0x%x)", xs->datalen); printf("res(0x%x)", xs->resid); printf("err(0x%x)", xs->error); printf("bp(0x%x)", xs->bp); show_scsi_cmd(xs); } void show_scsi_cmd(xs) struct scsi_xfer *xs; { u_char *b = (u_char *) xs->cmd; int i = 0; sc_print_addr(xs->sc_link); printf("command: "); if ((xs->flags & SCSI_RESET) == 0) { while (i < xs->cmdlen) { if (i) printf(","); printf("%x", b[i++]); } printf("-[%d bytes]\n", xs->datalen); if (xs->datalen) show_mem(xs->data, min(64, xs->datalen)); } else printf("-RESET-\n"); } void show_mem(address, num) u_char *address; int num; { int x; printf("------------------------------"); for (x = 0; x < num; x++) { if ((x % 16) == 0) printf("\n%03d: ", x); printf("%02x ", *address++); } printf("\n------------------------------\n"); } #endif /*SCSIDEBUG */