/* $OpenBSD: scsiconf.c,v 1.91 2004/05/09 14:08:11 krw Exp $ */ /* $NetBSD: scsiconf.c,v 1.57 1996/05/02 01:09:01 neil Exp $ */ /* * Copyright (c) 1994 Charles Hannum. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by Charles Hannum. * 4. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ /* * Originally written by Julian Elischer (julian@tfs.com) * for TRW Financial Systems for use under the MACH(2.5) operating system. * * TRW Financial Systems, in accordance with their agreement with Carnegie * Mellon University, makes this software available to CMU to distribute * or use in any manner that they see fit as long as this message is kept with * the software. For this reason TFS also grants any other persons or * organisations permission to use or modify this software. * * TFS supplies this software to be publicly redistributed * on the understanding that TFS is not responsible for the correct * functioning of this software in any circumstances. * * Ported to run under 386BSD by Julian Elischer (julian@tfs.com) Sept 1992 */ #include #include #include #include #include #include #include #if 0 #if NCALS > 0 { T_PROCESSOR, T_FIXED, 1, 0, 0, 0 }, #endif /* NCALS */ #if NBLL > 0 { T_PROCESSOR, T_FIXED, 1, "AEG ", "READER ", "V1.0" }, #endif /* NBLL */ #if NKIL > 0 { T_SCANNER, T_FIXED, 0, "KODAK ", "IL Scanner 900 ", 0 }, #endif /* NKIL */ #endif /* * Declarations */ int scsi_probedev(struct scsibus_softc *, struct scsi_inquiry_data *, int, int); int scsi_probe_bus(int bus, int target, int lun); struct scsi_device probe_switch = { NULL, NULL, NULL, NULL, }; int scsibusmatch(struct device *, void *, void *); void scsibusattach(struct device *, struct device *, void *); int scsibusactivate(struct device *, enum devact); int scsibusdetach(struct device *, int); void scsibuszeroref(struct device *); int scsibussubmatch(struct device *, void *, void *); struct cfattach scsibus_ca = { sizeof(struct scsibus_softc), scsibusmatch, scsibusattach, scsibusdetach, scsibusactivate, scsibuszeroref }; struct cfdriver scsibus_cd = { NULL, "scsibus", DV_DULL }; int scsidebug_buses = SCSIDEBUG_BUSES; int scsidebug_targets = SCSIDEBUG_TARGETS; int scsidebug_luns = SCSIDEBUG_LUNS; int scsidebug_level = SCSIDEBUG_LEVEL; int scsiforcelun_buses = SCSIFORCELUN_BUSES; int scsiforcelun_targets = SCSIFORCELUN_TARGETS; int scsi_autoconf = SCSI_AUTOCONF; int scsibusprint(void *, const char *); int scsiprint(aux, pnp) void *aux; const char *pnp; { /* only "scsibus"es can attach to "scsi"s; easy. */ if (pnp) printf("scsibus at %s", pnp); return (UNCONF); } int scsibusmatch(parent, match, aux) struct device *parent; void *match, *aux; { return 1; } /* * The routine called by the adapter boards to get all their * devices configured in. */ void scsibusattach(parent, self, aux) struct device *parent, *self; void *aux; { struct scsibus_softc *sb = (struct scsibus_softc *)self; struct scsi_link *sc_link_proto = aux; int nbytes, i; if (!cold) scsi_autoconf = 0; sc_link_proto->scsibus = sb->sc_dev.dv_unit; sb->adapter_link = sc_link_proto; if (sb->adapter_link->adapter_buswidth == 0) sb->adapter_link->adapter_buswidth = 8; sb->sc_buswidth = sb->adapter_link->adapter_buswidth; if (sb->adapter_link->luns == 0) sb->adapter_link->luns = 8; printf(": %d targets\n", sb->sc_buswidth); /* Initialize shared data. */ scsi_init(); nbytes = sb->sc_buswidth * sizeof(struct scsi_link **); sb->sc_link = (struct scsi_link ***)malloc(nbytes, M_DEVBUF, M_NOWAIT); if (sb->sc_link == NULL) panic("scsibusattach: can't allocate target links"); nbytes = 8 * sizeof(struct scsi_link *); for (i = 0; i < sb->sc_buswidth; i++) { sb->sc_link[i] = (struct scsi_link **)malloc(nbytes, M_DEVBUF, M_NOWAIT); if (sb->sc_link[i] == NULL) panic("scsibusattach: can't allocate lun links"); bzero(sb->sc_link[i], nbytes); } #if defined(SCSI_DELAY) && SCSI_DELAY > 2 printf("%s: waiting for scsi devices to settle\n", sb->sc_dev.dv_xname); #else /* SCSI_DELAY > 2 */ #undef SCSI_DELAY #define SCSI_DELAY 2 #endif /* SCSI_DELAY */ delay(1000000 * SCSI_DELAY); scsi_probe_bus(sb->sc_dev.dv_unit, -1, -1); } int scsibusactivate(dev, act) struct device *dev; enum devact act; { return (config_activate_children(dev, act)); } int scsibusdetach (dev, type) struct device *dev; int type; { return (config_detach_children(dev, type)); } void scsibuszeroref(dev) struct device *dev; { struct scsibus_softc *sb = (struct scsibus_softc *)dev; int i; for (i = 0; i < sb->sc_buswidth; i++) { if (sb->sc_link[i] != NULL) free(sb->sc_link[i], M_DEVBUF); } free(sb->sc_link, M_DEVBUF); } int scsibussubmatch(parent, match, aux) struct device *parent; void *match, *aux; { struct cfdata *cf = match; struct scsibus_attach_args *sa = aux; struct scsi_link *sc_link = sa->sa_sc_link; if (cf->cf_loc[0] != -1 && cf->cf_loc[0] != sc_link->target) return 0; if (cf->cf_loc[1] != -1 && cf->cf_loc[1] != sc_link->lun) return 0; return ((*cf->cf_attach->ca_match)(parent, match, aux)); } /* * Probe the requested scsi bus. It must be already set up. * -1 requests all set up scsi busses. * target and lun optionally narrow the search if not -1 */ int scsi_probe_busses(bus, target, lun) int bus, target, lun; { if (bus == -1) { for (bus = 0; bus < scsibus_cd.cd_ndevs; bus++) if (scsibus_cd.cd_devs[bus]) scsi_probe_bus(bus, target, lun); return 0; } else { return scsi_probe_bus(bus, target, lun); } } /* * Probe the requested scsi bus. It must be already set up. * target and lun optionally narrow the search if not -1 */ int scsi_probe_bus(bus, target, lun) int bus, target, lun; { struct scsi_inquiry_data inqbuflun0; struct scsibus_softc *scsi; u_int16_t scsi_addr; int maxtarget, mintarget, maxlun, minlun; if (bus < 0 || bus >= scsibus_cd.cd_ndevs) return ENXIO; scsi = scsibus_cd.cd_devs[bus]; if (!scsi) return ENXIO; scsi_addr = scsi->adapter_link->adapter_target; if (target == -1) { maxtarget = scsi->adapter_link->adapter_buswidth - 1; mintarget = 0; } else { if (target < 0 || target >= scsi->adapter_link->adapter_buswidth) return EINVAL; maxtarget = mintarget = target; } if (lun == -1) { maxlun = scsi->adapter_link->luns - 1; minlun = 0; } else { if (lun < 0 || lun >= scsi->adapter_link->luns) return EINVAL; maxlun = lun; if (lun == 0 || scsi->sc_link[target][0] == NULL) minlun = 0; else minlun = lun; } for (target = mintarget; target <= maxtarget; target++) if (target != scsi_addr) { bzero(&inqbuflun0, sizeof inqbuflun0); if (minlun != 0 && (scsi_inquire(scsi->sc_link[target][0], &inqbuflun0, 0) != 0)) continue; for (lun = minlun; lun <= maxlun; lun++) if (scsi_probedev(scsi, &inqbuflun0, target, lun) == EINVAL) break; } return 0; } void scsi_strvis(dst, src, len) u_char *dst, *src; int len; { u_char last; /* Trim leading and trailing whitespace and NULs. */ while (len > 0 && (src[0] == ' ' || src[0] == '\t' || src[0] == '\n' || src[0] == '\0' || src[0] == 0xff)) ++src, --len; while (len > 0 && (src[len-1] == ' ' || src[len-1] == '\t' || src[len-1] == '\n' || src[len-1] == '\0' || src[len-1] == 0xff)) --len; last = 0xff; while (len > 0) { switch (*src) { case ' ': case '\t': case '\n': case '\0': case 0xff: /* collapse whitespace and NULs to a single space */ if (last != ' ') *dst++ = ' '; last = ' '; break; case '\\': /* quote characters */ *dst++ = '\\'; *dst++ = '\\'; last = '\\'; break; default: if (*src < 0x20 || *src >= 0x80) { /* non-printable characters */ *dst++ = '\\'; *dst++ = ((*src & 0300) >> 6) + '0'; *dst++ = ((*src & 0070) >> 3) + '0'; *dst++ = ((*src & 0007) >> 0) + '0'; } else { /* normal characters */ *dst++ = *src; } last = *src; break; } ++src, --len; } *dst++ = 0; } struct scsi_quirk_inquiry_pattern { struct scsi_inquiry_pattern pattern; u_int16_t quirks; }; const struct scsi_quirk_inquiry_pattern scsi_quirk_patterns[] = { {{T_CDROM, T_REMOV, "PLEXTOR", "CD-ROM PX-40TS", "1.01"}, SDEV_NOSYNC}, {{T_OPTICAL, T_REMOV, "FUJITSU", "M2513A", "0800"}, SDEV_NOMODESENSE}, {{T_OPTICAL, T_REMOV, "DELTIS ", "MOS321 ", "3.30"}, SDEV_NOMODESENSE}, {{T_OPTICAL, T_REMOV, "FUJITSU", "M2513A", "0800"}, SDEV_NOMODESENSE}, {{T_OPTICAL, T_REMOV, "DELTIS ", "MOS321 ", "3.30"}, SDEV_NOMODESENSE}, {{T_DIRECT, T_FIXED, "MICROP ", "1588-15MBSUN0669", ""}, SDEV_AUTOSAVE}, {{T_DIRECT, T_FIXED, "DEC ", "RZ55 (C) DEC", ""}, SDEV_AUTOSAVE}, {{T_DIRECT, T_FIXED, "EMULEX ", "MD21/S2 ESDI", "A00"}, SDEV_AUTOSAVE}, {{T_DIRECT, T_FIXED, "IBMRAID ", "0662S", ""}, SDEV_AUTOSAVE}, {{T_DIRECT, T_FIXED, "IBM ", "0663H", ""}, SDEV_AUTOSAVE}, {{T_DIRECT, T_FIXED, "IBM", "0664", ""}, SDEV_AUTOSAVE}, {{T_DIRECT, T_FIXED, "IBM ", "H3171-S2", ""}, SDEV_AUTOSAVE}, {{T_DIRECT, T_FIXED, "IBM ", "KZ-C", ""}, SDEV_AUTOSAVE}, /* Broken IBM disk */ {{T_DIRECT, T_FIXED, "" , "DFRSS2F", ""}, SDEV_AUTOSAVE}, {{T_DIRECT, T_FIXED, "QUANTUM ", "ELS85S ", ""}, SDEV_AUTOSAVE}, {{T_DIRECT, T_FIXED, "SEAGATE ", "ST19171FC", ""}, SDEV_NOMODESENSE}, {{T_DIRECT, T_FIXED, "SEAGATE ", "ST34501FC ", ""}, SDEV_NOMODESENSE}, {{T_DIRECT, T_REMOV, "iomega", "jaz 1GB", ""}, SDEV_NOMODESENSE|SDEV_NOTAGS}, {{T_DIRECT, T_REMOV, "IOMEGA", "ZIP 100", ""}, SDEV_NOMODESENSE}, {{T_DIRECT, T_REMOV, "IOMEGA", "ZIP 250", ""}, SDEV_NOMODESENSE}, {{T_DIRECT, T_FIXED, "IBM", "0661467", "G"}, SDEV_NOMODESENSE}, {{T_DIRECT, T_FIXED, "MICROP", "4421-07", ""}, SDEV_NOTAGS}, {{T_DIRECT, T_FIXED, "SEAGATE", "ST150176LW", "0002"}, SDEV_NOTAGS}, {{T_DIRECT, T_FIXED, "HP", "C3725S", ""}, SDEV_NOTAGS}, {{T_DIRECT, T_FIXED, "IBM", "DCAS", ""}, SDEV_NOTAGS}, {{T_SEQUENTIAL, T_REMOV, "SONY ", "SDT-5000 ", "3."}, SDEV_NOSYNC|SDEV_NOWIDE}, {{T_SEQUENTIAL, T_REMOV, "WangDAT ", "Model 1300 ", "02.4"}, SDEV_NOSYNC|SDEV_NOWIDE}, {{T_SEQUENTIAL, T_REMOV, "WangDAT ", "Model 2600 ", "01.7"}, SDEV_NOSYNC|SDEV_NOWIDE}, {{T_SEQUENTIAL, T_REMOV, "WangDAT ", "Model 3200 ", "02.2"}, SDEV_NOSYNC|SDEV_NOWIDE}, /* ATAPI device quirks */ {{T_CDROM, T_REMOV, "ALPS ELECTRIC CO.,LTD. DC544C", "", "SW03D"}, ADEV_NOTUR}, {{T_CDROM, T_REMOV, "CR-2801TE", "", "1.07"}, ADEV_NOSENSE}, {{T_CDROM, T_REMOV, "CREATIVECD3630E", "", "AC101"}, ADEV_NOSENSE}, {{T_CDROM, T_REMOV, "FX320S", "", "q01"}, ADEV_NOSENSE}, {{T_CDROM, T_REMOV, "GCD-R580B", "", "1.00"}, ADEV_LITTLETOC}, {{T_CDROM, T_REMOV, "MATSHITA CR-574", "", "1.02"}, ADEV_NOCAPACITY}, {{T_CDROM, T_REMOV, "MATSHITA CR-574", "", "1.06"}, ADEV_NOCAPACITY}, {{T_CDROM, T_REMOV, "Memorex CRW-2642", "", "1.0g"}, ADEV_NOSENSE}, {{T_CDROM, T_REMOV, "NEC CD-ROM DRIVE:273", "", "4.21"}, ADEV_NOTUR}, {{T_CDROM, T_REMOV, "SANYO CRD-256P", "", "1.02"}, ADEV_NOCAPACITY}, {{T_CDROM, T_REMOV, "SANYO CRD-254P", "", "1.02"}, ADEV_NOCAPACITY}, {{T_CDROM, T_REMOV, "SANYO CRD-S54P", "", "1.08"}, ADEV_NOCAPACITY}, {{T_CDROM, T_REMOV, "CD-ROM CDR-S1", "", "1.70"}, ADEV_NOCAPACITY}, /* Sanyo */ {{T_CDROM, T_REMOV, "CD-ROM CDR-N16", "", "1.25"}, ADEV_NOCAPACITY}, /* Sanyo */ {{T_CDROM, T_REMOV, "UJDCD8730", "", "1.14"}, ADEV_NODOORLOCK}, /* Acer */ }; /* * Print out autoconfiguration information for a subdevice. * * This is a slight abuse of 'standard' autoconfiguration semantics, * because 'print' functions don't normally print the colon and * device information. However, in this case that's better than * either printing redundant information before the attach message, * or having the device driver call a special function to print out * the standard device information. */ int scsibusprint(aux, pnp) void *aux; const char *pnp; { struct scsibus_attach_args *sa = aux; struct scsi_inquiry_data *inqbuf; u_int8_t type; boolean removable; char *dtype, *qtype; char vendor[33], product[65], revision[17]; int target, lun; if (pnp != NULL) printf("%s", pnp); inqbuf = sa->sa_inqbuf; target = sa->sa_sc_link->target; lun = sa->sa_sc_link->lun; type = inqbuf->device & SID_TYPE; removable = inqbuf->dev_qual2 & SID_REMOVABLE ? 1 : 0; /* * Figure out basic device type and qualifier. */ dtype = 0; switch (inqbuf->device & SID_QUAL) { case SID_QUAL_LU_OK: qtype = ""; break; case SID_QUAL_LU_OFFLINE: qtype = " offline"; break; case SID_QUAL_RSVD: case SID_QUAL_BAD_LU: panic("scsibusprint: impossible qualifier"); default: qtype = ""; dtype = "vendor-unique"; break; } if (dtype == 0) { switch (type) { case T_DIRECT: dtype = "direct"; break; case T_SEQUENTIAL: dtype = "sequential"; break; case T_PRINTER: dtype = "printer"; break; case T_PROCESSOR: dtype = "processor"; break; case T_CDROM: dtype = "cdrom"; break; case T_WORM: dtype = "worm"; break; case T_SCANNER: dtype = "scanner"; break; case T_OPTICAL: dtype = "optical"; break; case T_CHANGER: dtype = "changer"; break; case T_COMM: dtype = "communication"; break; case T_ENCLOSURE: dtype = "enclosure services"; break; case T_RDIRECT: dtype = "simplified direct"; break; case T_NODEVICE: panic("scsibusprint: impossible device type"); default: dtype = "unknown"; break; } } scsi_strvis(vendor, inqbuf->vendor, 8); scsi_strvis(product, inqbuf->product, 16); scsi_strvis(revision, inqbuf->revision, 4); printf(" targ %d lun %d: <%s, %s, %s> SCSI%d %d/%s %s%s", target, lun, vendor, product, revision, inqbuf->version & SID_ANSII, type, dtype, removable ? "removable" : "fixed", qtype); return (UNCONF); } /* * Given a target and lun, ask the device what it is, and find the correct * driver table entry. * * Return 0 if further LUNs are possible, EINVAL if not. */ int scsi_probedev(scsi, inqbuflun0, target, lun) struct scsibus_softc *scsi; struct scsi_inquiry_data *inqbuflun0; int target, lun; { struct scsi_link *sc_link; static struct scsi_inquiry_data inqbuf; const struct scsi_quirk_inquiry_pattern *finger; int priority, rslt = 0; struct scsibus_attach_args sa; struct cfdata *cf; /* Skip this slot if it is already attached and try the next LUN. */ if (scsi->sc_link[target][lun]) return (0); sc_link = malloc(sizeof(*sc_link), M_DEVBUF, M_NOWAIT); if (sc_link == NULL) return (EINVAL); *sc_link = *scsi->adapter_link; sc_link->target = target; sc_link->lun = lun; sc_link->device = &probe_switch; sc_link->inquiry_flags = 0; SC_DEBUG(sc_link, SDEV_DB2, ("scsi_link created.\n")); /* * Tell drivers that are paying attention to avoid sync/wide/tags until * INQUIRY data has been processed and the quirks information is * complete. Some drivers set bits in quirks before we get here, so * just add NOTAGS, NOWIDE and NOSYNC. */ sc_link->quirks |= SDEV_NOSYNC | SDEV_NOWIDE | SDEV_NOTAGS; /* * Ask the device what it is */ #ifdef SCSIDEBUG if (((1 << sc_link->scsibus) & scsidebug_buses) && ((1 << target) & scsidebug_targets) && ((1 << lun) & scsidebug_luns)) sc_link->flags |= scsidebug_level; #endif /* SCSIDEBUG */ #if defined(mvme68k) if (lun == 0) { /* XXX some drivers depend on this */ scsi_test_unit_ready(sc_link, TEST_READY_RETRIES_DEFAULT, scsi_autoconf | SCSI_IGNORE_ILLEGAL_REQUEST | SCSI_IGNORE_NOT_READY | SCSI_IGNORE_MEDIA_CHANGE); } #endif #ifdef SCSI_2_DEF /* Some devices need to be told to go to SCSI2. */ /* However some just explode if you tell them this... leave it out. */ scsi_change_def(sc_link, scsi_autoconf | SCSI_SILENT); #endif /* SCSI_2_DEF */ /* Now go ask the device all about itself. */ rslt = scsi_inquire(sc_link, &inqbuf, scsi_autoconf | SCSI_SILENT); if (rslt != 0) { SC_DEBUG(sc_link, SDEV_DB2, ("Bad LUN. rslt = %i\n", rslt)); if (lun == 0) rslt = EINVAL; goto bad; } switch (inqbuf.device & SID_QUAL) { case SID_QUAL_RSVD: case SID_QUAL_BAD_LU: case SID_QUAL_LU_OFFLINE: SC_DEBUG(sc_link, SDEV_DB1, ("Bad LUN. SID_QUAL = 0x%02x\n", inqbuf.device & SID_QUAL)); goto bad; case SID_QUAL_LU_OK: if ((inqbuf.device & SID_TYPE) == T_NODEVICE) { SC_DEBUG(sc_link, SDEV_DB1, ("Bad LUN. SID_TYPE = T_NODEVICE\n")); goto bad; } break; default: break; } if (lun == 0) bcopy(&inqbuf, inqbuflun0, sizeof *inqbuflun0); else if (((1 << sc_link->scsibus) & scsiforcelun_buses) && ((1 << target) & scsiforcelun_targets)) ; else if (memcmp(&inqbuf, inqbuflun0, sizeof inqbuf) == 0) { /* The device doesn't distinguish between LUNs. */ SC_DEBUG(sc_link, SDEV_DB1, ("IDENTIFY not supported.\n")); rslt = EINVAL; goto bad; } finger = (const struct scsi_quirk_inquiry_pattern *)scsi_inqmatch( &inqbuf, scsi_quirk_patterns, sizeof(scsi_quirk_patterns)/sizeof(scsi_quirk_patterns[0]), sizeof(scsi_quirk_patterns[0]), &priority); /* * Based upon the inquiry flags we got back, and if we're * at SCSI-2 or better, remove some limiting quirks. */ if ((inqbuf.version & SID_ANSII) >= 2) { if ((inqbuf.flags & SID_CmdQue) != 0) sc_link->quirks &= ~SDEV_NOTAGS; if ((inqbuf.flags & SID_Sync) != 0) sc_link->quirks &= ~SDEV_NOSYNC; if ((inqbuf.flags & SID_WBus16) != 0) sc_link->quirks &= ~SDEV_NOWIDE; } /* * Now apply any quirks from the table. */ if (priority != 0) sc_link->quirks |= finger->quirks; sc_link->scsi_version = inqbuf.version; /* * Save INQUIRY "flags" (SID_Linked, etc.) for low-level drivers. */ sc_link->inquiry_flags = inqbuf.flags; /* * note what BASIC type of device it is */ if ((inqbuf.dev_qual2 & SID_REMOVABLE) != 0) sc_link->flags |= SDEV_REMOVABLE; sa.sa_sc_link = sc_link; sa.sa_inqbuf = &inqbuf; if ((cf = config_search(scsibussubmatch, (struct device *)scsi, &sa)) == 0) { scsibusprint(&sa, scsi->sc_dev.dv_xname); printf(" not configured\n"); goto bad; } scsi->sc_link[target][lun] = sc_link; /* * Generate a TEST_UNIT_READY command. This gives drivers waiting for * valid quirks data a chance to set wide/sync/tag options * appropriately. It also clears any outstanding ACA conditions that * INQUIRY may leave behind. * * Do this now so that any messages generated by config_attach() do not * have negotiation messages inserted into their midst. */ scsi_test_unit_ready(sc_link, TEST_READY_RETRIES_DEFAULT, scsi_autoconf | SCSI_IGNORE_ILLEGAL_REQUEST | SCSI_IGNORE_NOT_READY | SCSI_IGNORE_MEDIA_CHANGE); config_attach((struct device *)scsi, cf, &sa, scsibusprint); return (0); bad: free(sc_link, M_DEVBUF); return (rslt); } /* * Return a priority based on how much of the inquiry data matches * the patterns for the particular driver. */ const void * scsi_inqmatch(inqbuf, base, nmatches, matchsize, bestpriority) struct scsi_inquiry_data *inqbuf; const void *base; int nmatches, matchsize; int *bestpriority; { u_int8_t type; boolean removable; const void *bestmatch; /* Include the qualifier to catch vendor-unique types. */ type = inqbuf->device; removable = inqbuf->dev_qual2 & SID_REMOVABLE ? T_REMOV : T_FIXED; for (*bestpriority = 0, bestmatch = 0; nmatches--; base += matchsize) { struct scsi_inquiry_pattern *match = (void *)base; int priority, len; if (type != match->type) continue; if (removable != match->removable) continue; priority = 2; len = strlen(match->vendor); if (bcmp(inqbuf->vendor, match->vendor, len)) continue; priority += len; len = strlen(match->product); if (bcmp(inqbuf->product, match->product, len)) continue; priority += len; len = strlen(match->revision); if (bcmp(inqbuf->revision, match->revision, len)) continue; priority += len; #if SCSIDEBUG printf("scsi_inqmatch: %d/%d/%d <%s, %s, %s>\n", priority, match->type, match->removable, match->vendor, match->product, match->revision); #endif if (priority > *bestpriority) { *bestpriority = priority; bestmatch = base; } } return (bestmatch); }