/* $OpenBSD: scsiconf.h,v 1.160 2014/01/31 02:53:41 dlg Exp $ */ /* $NetBSD: scsiconf.h,v 1.35 1997/04/02 02:29:38 mycroft Exp $ */ /* * Copyright (c) 1993, 1994, 1995 Charles Hannum. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by Charles Hannum. * 4. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ /* * Originally written by Julian Elischer (julian@tfs.com) * for TRW Financial Systems for use under the MACH(2.5) operating system. * * TRW Financial Systems, in accordance with their agreement with Carnegie * Mellon University, makes this software available to CMU to distribute * or use in any manner that they see fit as long as this message is kept with * the software. For this reason TFS also grants any other persons or * organisations permission to use or modify this software. * * TFS supplies this software to be publicly redistributed * on the understanding that TFS is not responsible for the correct * functioning of this software in any circumstances. * * Ported to run under 386BSD by Julian Elischer (julian@tfs.com) Sept 1992 */ #ifndef SCSI_SCSICONF_H #define SCSI_SCSICONF_H #include #include #include #include #include static __inline void _lto2b(u_int32_t val, u_int8_t *bytes); static __inline void _lto3b(u_int32_t val, u_int8_t *bytes); static __inline void _lto4b(u_int32_t val, u_int8_t *bytes); static __inline void _lto8b(u_int64_t val, u_int8_t *bytes); static __inline u_int32_t _2btol(u_int8_t *bytes); static __inline u_int32_t _3btol(u_int8_t *bytes); static __inline u_int32_t _4btol(u_int8_t *bytes); static __inline u_int64_t _5btol(u_int8_t *bytes); static __inline u_int64_t _8btol(u_int8_t *bytes); static __inline void _lto2b(u_int32_t val, u_int8_t *bytes) { bytes[0] = (val >> 8) & 0xff; bytes[1] = val & 0xff; } static __inline void _lto3b(u_int32_t val, u_int8_t *bytes) { bytes[0] = (val >> 16) & 0xff; bytes[1] = (val >> 8) & 0xff; bytes[2] = val & 0xff; } static __inline void _lto4b(u_int32_t val, u_int8_t *bytes) { bytes[0] = (val >> 24) & 0xff; bytes[1] = (val >> 16) & 0xff; bytes[2] = (val >> 8) & 0xff; bytes[3] = val & 0xff; } static __inline void _lto8b(u_int64_t val, u_int8_t *bytes) { bytes[0] = (val >> 56) & 0xff; bytes[1] = (val >> 48) & 0xff; bytes[2] = (val >> 40) & 0xff; bytes[3] = (val >> 32) & 0xff; bytes[4] = (val >> 24) & 0xff; bytes[5] = (val >> 16) & 0xff; bytes[6] = (val >> 8) & 0xff; bytes[7] = val & 0xff; } static __inline u_int32_t _2btol(u_int8_t *bytes) { u_int32_t rv; rv = (bytes[0] << 8) | bytes[1]; return (rv); } static __inline u_int32_t _3btol(u_int8_t *bytes) { u_int32_t rv; rv = (bytes[0] << 16) | (bytes[1] << 8) | bytes[2]; return (rv); } static __inline u_int32_t _4btol(u_int8_t *bytes) { u_int32_t rv; rv = (bytes[0] << 24) | (bytes[1] << 16) | (bytes[2] << 8) | bytes[3]; return (rv); } static __inline u_int64_t _5btol(u_int8_t *bytes) { u_int64_t rv; rv = ((u_int64_t)bytes[0] << 32) | ((u_int64_t)bytes[1] << 24) | ((u_int64_t)bytes[2] << 16) | ((u_int64_t)bytes[3] << 8) | (u_int64_t)bytes[4]; return (rv); } static __inline u_int64_t _8btol(u_int8_t *bytes) { u_int64_t rv; rv = (((u_int64_t)bytes[0]) << 56) | (((u_int64_t)bytes[1]) << 48) | (((u_int64_t)bytes[2]) << 40) | (((u_int64_t)bytes[3]) << 32) | (((u_int64_t)bytes[4]) << 24) | (((u_int64_t)bytes[5]) << 16) | (((u_int64_t)bytes[6]) << 8) | ((u_int64_t)bytes[7]); return (rv); } #ifdef _KERNEL #define DEVID_NONE 0 #define DEVID_NAA 1 #define DEVID_EUI 2 #define DEVID_T10 3 #define DEVID_SERIAL 4 #define DEVID_WWN 5 struct devid { u_int8_t d_type; u_int8_t d_flags; #define DEVID_F_PRINT (1<<0) u_int8_t d_refcount; u_int8_t d_len; /* * the devid struct is basically a header, the actual id is allocated * immediately after it. */ }; #define DEVID_CMP(_a, _b) ( \ (_a) != NULL && (_b) != NULL && \ ((_a) == (_b) || \ ((_a)->d_type != DEVID_NONE && \ (_a)->d_type == (_b)->d_type && \ (_a)->d_len == (_b)->d_len && \ bcmp((_a) + 1, (_b) + 1, (_a)->d_len) == 0)) \ ) struct devid * devid_alloc(u_int8_t, u_int8_t, u_int8_t, u_int8_t *); struct devid * devid_copy(struct devid *); void devid_free(struct devid *); /* * The following documentation tries to describe the relationship between the * various structures defined in this file: * * each adapter type has a scsi_adapter struct. This describes the adapter and * identifies routines that can be called to use the adapter. * each existing device position (scsibus + target + lun) * can be described by a scsi_link struct. * Only scsi positions that actually have devices, have a scsi_link * structure assigned. so in effect each device has scsi_link struct. * The scsi_link structure contains information identifying both the * device driver and the adapter driver for that position on that scsi bus, * and can be said to 'link' the two. * each individual scsi bus has an array that points to all the scsi_link * structs associated with that scsi bus. Slots with no device have * a NULL pointer. * each individual device also knows the address of its own scsi_link * structure. * * ------------- * * The key to all this is the scsi_link structure which associates all the * other structures with each other in the correct configuration. The * scsi_link is the connecting information that allows each part of the * scsi system to find the associated other parts. */ struct scsi_xfer; struct scsi_link; struct scsibus_softc; /* * Temporary hack */ extern int scsi_autoconf; /* * These entrypoints are called by the high-end drivers to get services from * whatever low-end drivers they are attached to. Each adapter type has one * of these statically allocated. */ struct scsi_adapter { void (*scsi_cmd)(struct scsi_xfer *); void (*scsi_minphys)(struct buf *, struct scsi_link *); int (*dev_probe)(struct scsi_link *); void (*dev_free)(struct scsi_link *); int (*ioctl)(struct scsi_link *, u_long, caddr_t, int); }; struct scsi_iopool; struct scsi_iohandler { TAILQ_ENTRY(scsi_iohandler) q_entry; u_int q_state; struct scsi_iopool *pool; void (*handler)(void *, void *); void *cookie; }; TAILQ_HEAD(scsi_runq, scsi_iohandler); struct scsi_iopool { /* access to the IOs */ void *iocookie; void *(*io_get)(void *); void (*io_put)(void *, void *); /* the runqueue */ struct scsi_runq queue; /* runqueue semaphore */ u_int running; /* protection for the runqueue and its semaphore */ struct mutex mtx; }; struct scsi_xshandler { struct scsi_iohandler ioh; /* must be first */ struct scsi_link *link; void (*handler)(struct scsi_xfer *); }; /* * This structure describes the connection between an adapter driver and * a device driver, and is used by each to call services provided by * the other, and to allow generic scsi glue code to call these services * as well. */ struct scsi_link { SLIST_ENTRY(scsi_link) bus_list; u_int state; #define SDEV_S_WAITING (1<<0) #define SDEV_S_DYING (1<<1) u_int8_t scsibus; /* the Nth scsibus */ u_int8_t luns; u_int16_t target; /* targ of this dev */ u_int16_t lun; /* lun of this dev */ u_int16_t openings; /* available operations */ u_int64_t port_wwn; /* world wide name of port */ u_int64_t node_wwn; /* world wide name of node */ u_int16_t adapter_target; /* what are we on the scsi bus */ u_int16_t adapter_buswidth; /* 8 (regular) or 16 (wide). (0 becomes 8) */ u_int16_t flags; /* flags that all devices have */ #define SDEV_REMOVABLE 0x0001 /* media is removable */ #define SDEV_MEDIA_LOADED 0x0002 /* device figures are still valid */ #define SDEV_READONLY 0x0004 /* device is read-only */ #define SDEV_OPEN 0x0008 /* at least 1 open session */ #define SDEV_DBX 0x00f0 /* debugging flags (scsi_debug.h) */ #define SDEV_EJECTING 0x0100 /* eject on device close */ #define SDEV_ATAPI 0x0200 /* device is ATAPI */ #define SDEV_2NDBUS 0x0400 /* device is a 'second' bus device */ #define SDEV_UMASS 0x0800 /* device is UMASS SCSI */ #define SDEV_VIRTUAL 0x1000 /* device is virtualised on the hba */ #define SDEV_OWN_IOPL 0x2000 /* scsibus */ u_int16_t quirks; /* per-device oddities */ #define SDEV_AUTOSAVE 0x0001 /* do implicit SAVEDATAPOINTER on disconnect */ #define SDEV_NOSYNC 0x0002 /* does not grok SDTR */ #define SDEV_NOWIDE 0x0004 /* does not grok WDTR */ #define SDEV_NOTAGS 0x0008 /* lies about having tagged queueing */ #define SDEV_NOSYNCCACHE 0x0100 /* no SYNCHRONIZE_CACHE */ #define ADEV_NOSENSE 0x0200 /* No request sense - ATAPI */ #define ADEV_LITTLETOC 0x0400 /* little-endian TOC - ATAPI */ #define ADEV_NOCAPACITY 0x0800 /* no READ CD CAPACITY */ #define ADEV_NODOORLOCK 0x2000 /* can't lock door */ #define SDEV_ONLYBIG 0x4000 /* always use READ_BIG and WRITE_BIG */ int (*interpret_sense)(struct scsi_xfer *); void *device_softc; /* needed for call to foo_start */ struct scsi_adapter *adapter; /* adapter entry points etc. */ void *adapter_softc; /* needed for call to foo_scsi_cmd */ struct scsibus_softc *bus; /* link to the scsibus we're on */ struct scsi_inquiry_data inqdata; /* copy of INQUIRY data from probe */ struct devid *id; struct scsi_runq queue; u_int running; u_short pending; struct scsi_iopool *pool; }; int scsiprint(void *, const char *); /* * This describes matching information for scsi_inqmatch(). The more things * match, the higher the configuration priority. */ struct scsi_inquiry_pattern { u_int8_t type; int removable; char *vendor; char *product; char *revision; }; struct scsibus_attach_args { struct scsi_link *saa_sc_link; }; /* * One of these is allocated and filled in for each scsi bus. * It holds pointers to allow the scsi bus to get to the driver * that is running each LUN on the bus. * It also has a template entry which is the prototype struct * supplied by the adapter driver. This is used to initialise * the others, before they have the rest of the fields filled in. */ struct scsibus_softc { struct device sc_dev; struct scsi_link *adapter_link; /* prototype supplied by adapter */ SLIST_HEAD(, scsi_link) sc_link; u_int16_t sc_buswidth; }; /* * This is used to pass information from the high-level configuration code * to the device-specific drivers. */ struct scsi_attach_args { struct scsi_link *sa_sc_link; struct scsi_inquiry_data *sa_inqbuf; }; /* * Each scsi transaction is fully described by one of these structures. * It includes information about the source of the command and also the * device and adapter for which the command is destined. * (via the scsi_link structure) */ struct scsi_xfer { SIMPLEQ_ENTRY(scsi_xfer) xfer_list; int flags; struct scsi_link *sc_link; /* all about our device and adapter */ int retries; /* the number of times to retry */ int timeout; /* in milliseconds */ struct scsi_generic *cmd; /* The scsi command to execute */ int cmdlen; /* how long it is */ u_char *data; /* dma address OR a uio address */ int datalen; /* data len (blank if uio) */ size_t resid; /* how much buffer was not touched */ int error; /* an error value */ struct buf *bp; /* If we need to associate with a buf */ struct scsi_sense_data sense; /* 18 bytes*/ u_int8_t status; /* SCSI status */ struct scsi_generic cmdstore; /* stash the command in here */ /* * timeout structure for hba's to use for a command */ struct timeout stimeout; void *cookie; void (*done)(struct scsi_xfer *); void *io; /* adapter io resource */ }; SIMPLEQ_HEAD(scsi_xfer_list, scsi_xfer); /* * Per-request Flag values */ #define SCSI_NOSLEEP 0x00001 /* don't sleep */ #define SCSI_POLL 0x00002 /* poll for completion */ #define SCSI_AUTOCONF 0x00003 /* shorthand for SCSI_POLL | SCSI_NOSLEEP */ #define ITSDONE 0x00008 /* the transfer is as done as it gets */ #define SCSI_SILENT 0x00020 /* don't announce NOT READY or MEDIA CHANGE */ #define SCSI_IGNORE_NOT_READY 0x00040 /* ignore NOT READY */ #define SCSI_IGNORE_MEDIA_CHANGE 0x00080 /* ignore MEDIA CHANGE */ #define SCSI_IGNORE_ILLEGAL_REQUEST 0x00100 /* ignore ILLEGAL REQUEST */ #define SCSI_RESET 0x00200 /* Reset the device in question */ #define SCSI_DATA_IN 0x00800 /* expect data to come INTO memory */ #define SCSI_DATA_OUT 0x01000 /* expect data to flow OUT of memory */ #define SCSI_TARGET 0x02000 /* This defines a TARGET mode op. */ #define SCSI_ESCAPE 0x04000 /* Escape operation */ #define SCSI_PRIVATE 0xf0000 /* private to each HBA flags */ /* * Escape op-codes. This provides an extensible setup for operations * that are not scsi commands. They are intended for modal operations. */ #define SCSI_OP_TARGET 0x0001 #define SCSI_OP_RESET 0x0002 #define SCSI_OP_BDINFO 0x0003 /* * Error values an adapter driver may return */ #define XS_NOERROR 0 /* there is no error, (sense is invalid) */ #define XS_SENSE 1 /* Check the returned sense for the error */ #define XS_DRIVER_STUFFUP 2 /* Driver failed to perform operation */ #define XS_SELTIMEOUT 3 /* The device timed out.. turned off? */ #define XS_TIMEOUT 4 /* The Timeout reported was caught by SW */ #define XS_BUSY 5 /* The device busy, try again later? */ #define XS_SHORTSENSE 6 /* Check the ATAPI sense for the error */ #define XS_RESET 8 /* bus was reset; possible retry command */ #define XS_NO_CCB 9 /* device should requeue io and retry */ /* * Possible retries for scsi_test_unit_ready() */ #define TEST_READY_RETRIES 5 /* * Possible retries for most SCSI commands. */ #define SCSI_RETRIES 4 const void *scsi_inqmatch(struct scsi_inquiry_data *, const void *, int, int, int *); #define scsi_task(_f, _a1, _a2, _fl) \ workq_add_task(NULL, (_fl), (_f), (_a1), (_a2)) void scsi_init(void); int scsi_test_unit_ready(struct scsi_link *, int, int); int scsi_inquire(struct scsi_link *, struct scsi_inquiry_data *, int); int scsi_inquire_vpd(struct scsi_link *, void *, u_int, u_int8_t, int); void scsi_init_inquiry(struct scsi_xfer *, u_int8_t, u_int8_t, void *, size_t); int scsi_prevent(struct scsi_link *, int, int); int scsi_start(struct scsi_link *, int, int); int scsi_mode_sense(struct scsi_link *, int, int, struct scsi_mode_header *, size_t, int, int); int scsi_mode_sense_big(struct scsi_link *, int, int, struct scsi_mode_header_big *, size_t, int, int); void * scsi_mode_sense_page(struct scsi_mode_header *, int); void * scsi_mode_sense_big_page(struct scsi_mode_header_big *, int); int scsi_do_mode_sense(struct scsi_link *, int, union scsi_mode_sense_buf *, void **, u_int32_t *, u_int64_t *, u_int32_t *, int, int, int *); int scsi_mode_select(struct scsi_link *, int, struct scsi_mode_header *, int, int); int scsi_mode_select_big(struct scsi_link *, int, struct scsi_mode_header_big *, int, int); void scsi_done(struct scsi_xfer *); int scsi_do_ioctl(struct scsi_link *, u_long, caddr_t, int); void sc_print_addr(struct scsi_link *); int scsi_report_luns(struct scsi_link *, int, struct scsi_report_luns_data *, u_int32_t, int, int); void scsi_minphys(struct buf *, struct scsi_link *); int scsi_interpret_sense(struct scsi_xfer *); void scsi_xs_show(struct scsi_xfer *); void scsi_print_sense(struct scsi_xfer *); void scsi_show_mem(u_char *, int); void scsi_strvis(u_char *, u_char *, int); int scsi_delay(struct scsi_xfer *, int); int scsi_probe_bus(struct scsibus_softc *); int scsi_probe_target(struct scsibus_softc *, int); int scsi_probe_lun(struct scsibus_softc *, int, int); int scsi_detach_bus(struct scsibus_softc *, int); int scsi_detach_target(struct scsibus_softc *, int, int); int scsi_detach_lun(struct scsibus_softc *, int, int, int); int scsi_req_probe(struct scsibus_softc *, int, int); int scsi_req_detach(struct scsibus_softc *, int, int, int); int scsi_activate(struct scsibus_softc *, int, int, int); struct scsi_link * scsi_get_link(struct scsibus_softc *, int, int); void scsi_add_link(struct scsibus_softc *, struct scsi_link *); void scsi_remove_link(struct scsibus_softc *, struct scsi_link *); extern const u_int8_t version_to_spc[]; #define SCSISPC(x) (version_to_spc[(x) & SID_ANSII]) struct scsi_xfer * scsi_xs_get(struct scsi_link *, int); void scsi_xs_exec(struct scsi_xfer *); int scsi_xs_sync(struct scsi_xfer *); void scsi_xs_put(struct scsi_xfer *); #ifdef SCSIDEBUG void scsi_sense_print_debug(struct scsi_xfer *); #endif /* * iopool stuff */ void scsi_iopool_init(struct scsi_iopool *, void *, void *(*)(void *), void (*)(void *, void *)); void scsi_iopool_run(struct scsi_iopool *); void scsi_iopool_destroy(struct scsi_iopool *); void scsi_link_shutdown(struct scsi_link *); void * scsi_io_get(struct scsi_iopool *, int); void scsi_io_put(struct scsi_iopool *, void *); /* * default io allocator. */ #define SCSI_IOPOOL_POISON ((void *)0x5c5) void * scsi_default_get(void *); void scsi_default_put(void *, void *); /* * io handler interface */ void scsi_ioh_set(struct scsi_iohandler *, struct scsi_iopool *, void (*)(void *, void *), void *); int scsi_ioh_add(struct scsi_iohandler *); int scsi_ioh_del(struct scsi_iohandler *); void scsi_xsh_set(struct scsi_xshandler *, struct scsi_link *, void (*)(struct scsi_xfer *)); int scsi_xsh_add(struct scsi_xshandler *); int scsi_xsh_del(struct scsi_xshandler *); /* * utility functions */ int scsi_pending_start(struct mutex *, u_int *); int scsi_pending_finish(struct mutex *, u_int *); /* * Utility functions for SCSI HBA emulation. */ void scsi_cmd_rw_decode(struct scsi_generic *, u_int64_t *, u_int32_t *); #endif /* _KERNEL */ #endif /* SCSI_SCSICONF_H */