/* $OpenBSD: sd.c,v 1.116 2006/12/21 02:05:46 krw Exp $ */ /* $NetBSD: sd.c,v 1.111 1997/04/02 02:29:41 mycroft Exp $ */ /*- * Copyright (c) 1998 The NetBSD Foundation, Inc. * All rights reserved. * * This code is derived from software contributed to The NetBSD Foundation * by Charles M. Hannum. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the NetBSD * Foundation, Inc. and its contributors. * 4. Neither the name of The NetBSD Foundation nor the names of its * contributors may be used to endorse or promote products derived * from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. */ /* * Originally written by Julian Elischer (julian@dialix.oz.au) * for TRW Financial Systems for use under the MACH(2.5) operating system. * * TRW Financial Systems, in accordance with their agreement with Carnegie * Mellon University, makes this software available to CMU to distribute * or use in any manner that they see fit as long as this message is kept with * the software. For this reason TFS also grants any other persons or * organisations permission to use or modify this software. * * TFS supplies this software to be publicly redistributed * on the understanding that TFS is not responsible for the correct * functioning of this software in any circumstances. * * Ported to run under 386BSD by Julian Elischer (julian@dialix.oz.au) Sept 1992 */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include /* for BBSIZE and SBSIZE */ #include #define SDUNIT(dev) DISKUNIT(dev) #define SDMINOR(unit, part) DISKMINOR(unit, part) #define SDPART(dev) DISKPART(dev) #define MAKESDDEV(maj, unit, part) MAKEDISKDEV(maj, unit, part) #define SDLABELDEV(dev) (MAKESDDEV(major(dev), SDUNIT(dev), RAW_PART)) int sdmatch(struct device *, void *, void *); void sdattach(struct device *, struct device *, void *); int sdactivate(struct device *, enum devact); int sddetach(struct device *, int); void sdminphys(struct buf *); void sdgetdisklabel(dev_t, struct sd_softc *, struct disklabel *, struct cpu_disklabel *, int); void sdstart(void *); void sdrestart(void *); void sddone(struct scsi_xfer *); void sd_shutdown(void *); int sd_reassign_blocks(struct sd_softc *, u_long); int sd_interpret_sense(struct scsi_xfer *); int sd_get_parms(struct sd_softc *, struct disk_parms *, int); void sd_flush(struct sd_softc *, int); void viscpy(u_char *, u_char *, int); struct cfattach sd_ca = { sizeof(struct sd_softc), sdmatch, sdattach, sddetach, sdactivate }; struct cfdriver sd_cd = { NULL, "sd", DV_DISK }; struct dkdriver sddkdriver = { sdstrategy }; struct scsi_device sd_switch = { sd_interpret_sense, /* check out error handler first */ sdstart, /* have a queue, served by this */ NULL, /* have no async handler */ sddone, /* deal with stats at interrupt time */ }; const struct scsi_inquiry_pattern sd_patterns[] = { {T_DIRECT, T_FIXED, "", "", ""}, {T_DIRECT, T_REMOV, "", "", ""}, {T_RDIRECT, T_FIXED, "", "", ""}, {T_RDIRECT, T_REMOV, "", "", ""}, {T_OPTICAL, T_FIXED, "", "", ""}, {T_OPTICAL, T_REMOV, "", "", ""}, }; #define sdlock(softc) disk_lock(&(softc)->sc_dk) #define sdunlock(softc) disk_unlock(&(softc)->sc_dk) #define sdlookup(unit) (struct sd_softc *)device_lookup(&sd_cd, (unit)) int sdmatch(parent, match, aux) struct device *parent; void *match, *aux; { struct scsi_attach_args *sa = aux; int priority; (void)scsi_inqmatch(sa->sa_inqbuf, sd_patterns, sizeof(sd_patterns)/sizeof(sd_patterns[0]), sizeof(sd_patterns[0]), &priority); return (priority); } /* * The routine called by the low level scsi routine when it discovers * a device suitable for this driver. */ void sdattach(parent, self, aux) struct device *parent, *self; void *aux; { int error, result; struct sd_softc *sd = (void *)self; struct disk_parms *dp = &sd->params; struct scsi_attach_args *sa = aux; struct scsi_link *sc_link = sa->sa_sc_link; SC_DEBUG(sc_link, SDEV_DB2, ("sdattach:\n")); /* * Store information needed to contact our base driver */ sd->sc_link = sc_link; sc_link->device = &sd_switch; sc_link->device_softc = sd; /* * Initialize and attach the disk structure. */ sd->sc_dk.dk_driver = &sddkdriver; sd->sc_dk.dk_name = sd->sc_dev.dv_xname; disk_attach(&sd->sc_dk); if ((sc_link->flags & SDEV_ATAPI) && (sc_link->flags & SDEV_REMOVABLE)) sc_link->quirks |= SDEV_NOSYNCCACHE; if (!(sc_link->inqdata.flags & SID_RelAdr)) sc_link->quirks |= SDEV_ONLYBIG; /* * Note if this device is ancient. This is used in sdminphys(). */ if (!(sc_link->flags & SDEV_ATAPI) && SCSISPC(sa->sa_inqbuf->version) == 0) sd->flags |= SDF_ANCIENT; /* * Use the subdriver to request information regarding * the drive. We cannot use interrupts yet, so the * request must specify this. */ printf("\n"); timeout_set(&sd->sc_timeout, sdrestart, sd); /* Spin up the unit ready or not. */ scsi_start(sc_link, SSS_START, scsi_autoconf | SCSI_SILENT | SCSI_IGNORE_ILLEGAL_REQUEST | SCSI_IGNORE_MEDIA_CHANGE); /* Check that it is still responding and ok. */ error = scsi_test_unit_ready(sd->sc_link, TEST_READY_RETRIES, scsi_autoconf | SCSI_IGNORE_ILLEGAL_REQUEST | SCSI_IGNORE_MEDIA_CHANGE | SCSI_SILENT); if (error) result = SDGP_RESULT_OFFLINE; else result = sd_get_parms(sd, &sd->params, scsi_autoconf | SCSI_SILENT | SCSI_IGNORE_MEDIA_CHANGE); printf("%s: ", sd->sc_dev.dv_xname); switch (result) { case SDGP_RESULT_OK: printf("%luMB, %lu cyl, %lu head, %lu sec, %lu bytes/sec, %lu sec total", dp->disksize / (1048576 / dp->blksize), dp->cyls, dp->heads, dp->sectors, dp->blksize, dp->disksize); break; case SDGP_RESULT_OFFLINE: printf("drive offline"); break; #ifdef DIAGNOSTIC default: panic("sdattach: unknown result (%#x) from get_parms", result); break; #endif } printf("\n"); /* * Establish a shutdown hook so that we can ensure that * our data has actually made it onto the platter at * shutdown time. Note that this relies on the fact * that the shutdown hook code puts us at the head of * the list (thus guaranteeing that our hook runs before * our ancestors'). */ if ((sd->sc_sdhook = shutdownhook_establish(sd_shutdown, sd)) == NULL) printf("%s: WARNING: unable to establish shutdown hook\n", sd->sc_dev.dv_xname); } int sdactivate(self, act) struct device *self; enum devact act; { int rv = 0; switch (act) { case DVACT_ACTIVATE: break; case DVACT_DEACTIVATE: /* * Nothing to do; we key off the device's DVF_ACTIVATE. */ break; } return (rv); } int sddetach(self, flags) struct device *self; int flags; { struct sd_softc *sc = (struct sd_softc *)self; struct buf *dp, *bp; int s, bmaj, cmaj, mn; /* Remove unprocessed buffers from queue */ s = splbio(); for (dp = &sc->buf_queue; (bp = dp->b_actf) != NULL; ) { dp->b_actf = bp->b_actf; bp->b_error = ENXIO; bp->b_flags |= B_ERROR; biodone(bp); } splx(s); /* locate the major number */ mn = SDMINOR(self->dv_unit, 0); for (bmaj = 0; bmaj < nblkdev; bmaj++) if (bdevsw[bmaj].d_open == sdopen) vdevgone(bmaj, mn, mn + MAXPARTITIONS - 1, VBLK); for (cmaj = 0; cmaj < nchrdev; cmaj++) if (cdevsw[cmaj].d_open == sdopen) vdevgone(cmaj, mn, mn + MAXPARTITIONS - 1, VCHR); /* Get rid of the shutdown hook. */ if (sc->sc_sdhook != NULL) shutdownhook_disestablish(sc->sc_sdhook); /* Detach disk. */ disk_detach(&sc->sc_dk); return (0); } /* * Open the device. Make sure the partition info is as up-to-date as can be. */ int sdopen(dev, flag, fmt, p) dev_t dev; int flag, fmt; struct proc *p; { struct scsi_link *sc_link; struct sd_softc *sd; int error = 0, part, rawopen, unit; unit = SDUNIT(dev); part = SDPART(dev); rawopen = (part == RAW_PART) && (fmt == S_IFCHR); sd = sdlookup(unit); if (sd == NULL) return (ENXIO); sc_link = sd->sc_link; SC_DEBUG(sc_link, SDEV_DB1, ("sdopen: dev=0x%x (unit %d (of %d), partition %d)\n", dev, unit, sd_cd.cd_ndevs, part)); if ((error = sdlock(sd)) != 0) { device_unref(&sd->sc_dev); return (error); } if (sd->sc_dk.dk_openmask != 0) { /* * If any partition is open, but the disk has been invalidated, * disallow further opens of non-raw partition. */ if ((sc_link->flags & SDEV_MEDIA_LOADED) == 0) { if (rawopen) goto out; error = EIO; goto bad; } } else { /* Spin up the unit, ready or not. */ scsi_start(sc_link, SSS_START, (rawopen ? SCSI_SILENT : 0) | SCSI_IGNORE_ILLEGAL_REQUEST | SCSI_IGNORE_MEDIA_CHANGE); /* Use sd_interpret_sense() for sense errors. * * But only after spinning the disk up! Just in case a broken * device returns "Initialization command required." and causes * a loop of scsi_start() calls. */ sc_link->flags |= SDEV_OPEN; /* Check that it is still responding and ok. */ error = scsi_test_unit_ready(sc_link, TEST_READY_RETRIES, (rawopen ? SCSI_SILENT : 0) | SCSI_IGNORE_ILLEGAL_REQUEST | SCSI_IGNORE_MEDIA_CHANGE); if (error) { if (rawopen) { error = 0; goto out; } else goto bad; } /* Lock the pack in. */ if ((sc_link->flags & SDEV_REMOVABLE) != 0) { error = scsi_prevent(sc_link, PR_PREVENT, SCSI_IGNORE_ILLEGAL_REQUEST | SCSI_IGNORE_MEDIA_CHANGE); if (error) goto bad; } /* Load the physical device parameters. */ sc_link->flags |= SDEV_MEDIA_LOADED; if (sd_get_parms(sd, &sd->params, (rawopen ? SCSI_SILENT : 0)) == SDGP_RESULT_OFFLINE) { sc_link->flags &= ~SDEV_MEDIA_LOADED; error = ENXIO; goto bad; } SC_DEBUG(sc_link, SDEV_DB3, ("Params loaded\n")); /* Load the partition info if not already loaded. */ sdgetdisklabel(dev, sd, sd->sc_dk.dk_label, sd->sc_dk.dk_cpulabel, 0); SC_DEBUG(sc_link, SDEV_DB3, ("Disklabel loaded\n")); } /* Check that the partition exists. */ if (part != RAW_PART && (part >= sd->sc_dk.dk_label->d_npartitions || sd->sc_dk.dk_label->d_partitions[part].p_fstype == FS_UNUSED)) { error = ENXIO; goto bad; } out: /* Insure only one open at a time. */ switch (fmt) { case S_IFCHR: sd->sc_dk.dk_copenmask |= (1 << part); break; case S_IFBLK: sd->sc_dk.dk_bopenmask |= (1 << part); break; } sd->sc_dk.dk_openmask = sd->sc_dk.dk_copenmask | sd->sc_dk.dk_bopenmask; SC_DEBUG(sc_link, SDEV_DB3, ("open complete\n")); /* It's OK to fall through because dk_openmask is now non-zero. */ bad: if (sd->sc_dk.dk_openmask == 0) { if ((sd->sc_link->flags & SDEV_REMOVABLE) != 0) scsi_prevent(sc_link, PR_ALLOW, SCSI_IGNORE_ILLEGAL_REQUEST | SCSI_IGNORE_MEDIA_CHANGE); sc_link->flags &= ~(SDEV_OPEN | SDEV_MEDIA_LOADED); } sdunlock(sd); device_unref(&sd->sc_dev); return (error); } /* * Close the device. Only called if we are the last occurrence of an open * device. Convenient now but usually a pain. */ int sdclose(dev, flag, fmt, p) dev_t dev; int flag, fmt; struct proc *p; { struct sd_softc *sd; int part = SDPART(dev); int error; sd = sdlookup(SDUNIT(dev)); if (sd == NULL) return ENXIO; if ((error = sdlock(sd)) != 0) { device_unref(&sd->sc_dev); return (error); } switch (fmt) { case S_IFCHR: sd->sc_dk.dk_copenmask &= ~(1 << part); break; case S_IFBLK: sd->sc_dk.dk_bopenmask &= ~(1 << part); break; } sd->sc_dk.dk_openmask = sd->sc_dk.dk_copenmask | sd->sc_dk.dk_bopenmask; if (sd->sc_dk.dk_openmask == 0) { if ((sd->flags & SDF_DIRTY) != 0) sd_flush(sd, 0); if ((sd->sc_link->flags & SDEV_REMOVABLE) != 0) scsi_prevent(sd->sc_link, PR_ALLOW, SCSI_IGNORE_ILLEGAL_REQUEST | SCSI_IGNORE_NOT_READY); sd->sc_link->flags &= ~(SDEV_OPEN | SDEV_MEDIA_LOADED); if (sd->sc_link->flags & SDEV_EJECTING) { scsi_start(sd->sc_link, SSS_STOP|SSS_LOEJ, 0); sd->sc_link->flags &= ~SDEV_EJECTING; } timeout_del(&sd->sc_timeout); } sdunlock(sd); device_unref(&sd->sc_dev); return 0; } /* * Actually translate the requested transfer into one the physical driver * can understand. The transfer is described by a buf and will include * only one physical transfer. */ void sdstrategy(bp) struct buf *bp; { struct sd_softc *sd; int s; sd = sdlookup(SDUNIT(bp->b_dev)); if (sd == NULL) { bp->b_error = ENXIO; goto bad; } SC_DEBUG(sd->sc_link, SDEV_DB2, ("sdstrategy: %ld bytes @ blk %d\n", bp->b_bcount, bp->b_blkno)); /* * If the device has been made invalid, error out */ if ((sd->sc_link->flags & SDEV_MEDIA_LOADED) == 0) { if (sd->sc_link->flags & SDEV_OPEN) bp->b_error = EIO; else bp->b_error = ENODEV; goto bad; } /* * If it's a null transfer, return immediately */ if (bp->b_bcount == 0) goto done; /* * The transfer must be a whole number of blocks. */ if ((bp->b_bcount % sd->sc_dk.dk_label->d_secsize) != 0) { bp->b_error = EINVAL; goto bad; } /* * Do bounds checking, adjust transfer. if error, process. * If end of partition, just return. */ if (SDPART(bp->b_dev) != RAW_PART && bounds_check_with_label(bp, sd->sc_dk.dk_label, sd->sc_dk.dk_cpulabel, (sd->flags & (SDF_WLABEL|SDF_LABELLING)) != 0) <= 0) goto done; s = splbio(); /* * Place it in the queue of disk activities for this disk */ disksort(&sd->buf_queue, bp); /* * Tell the device to get going on the transfer if it's * not doing anything, otherwise just wait for completion */ sdstart(sd); splx(s); device_unref(&sd->sc_dev); return; bad: bp->b_flags |= B_ERROR; done: /* * Correctly set the buf to indicate a completed xfer */ bp->b_resid = bp->b_bcount; s = splbio(); biodone(bp); splx(s); if (sd != NULL) device_unref(&sd->sc_dev); } /* * sdstart looks to see if there is a buf waiting for the device * and that the device is not already busy. If both are true, * It dequeues the buf and creates a scsi command to perform the * transfer in the buf. The transfer request will call scsi_done * on completion, which will in turn call this routine again * so that the next queued transfer is performed. * The bufs are queued by the strategy routine (sdstrategy) * * This routine is also called after other non-queued requests * have been made of the scsi driver, to ensure that the queue * continues to be drained. * * must be called at the correct (highish) spl level * sdstart() is called at splbio from sdstrategy, sdrestart and scsi_done */ void sdstart(v) void *v; { struct sd_softc *sd = v; struct scsi_link *sc_link = sd->sc_link; struct buf *bp = 0; struct buf *dp; struct scsi_rw_big cmd_big; struct scsi_rw cmd_small; struct scsi_generic *cmdp; int blkno, nblks, cmdlen, error; struct partition *p; SC_DEBUG(sc_link, SDEV_DB2, ("sdstart\n")); splassert(IPL_BIO); /* * Check if the device has room for another command */ while (sc_link->openings > 0) { /* * there is excess capacity, but a special waits * It'll need the adapter as soon as we clear out of the * way and let it run (user level wait). */ if (sc_link->flags & SDEV_WAITING) { sc_link->flags &= ~SDEV_WAITING; wakeup((caddr_t)sc_link); return; } /* * See if there is a buf with work for us to do.. */ dp = &sd->buf_queue; if ((bp = dp->b_actf) == NULL) /* yes, an assign */ return; dp->b_actf = bp->b_actf; /* * If the device has become invalid, abort all the * reads and writes until all files have been closed and * re-opened */ if ((sc_link->flags & SDEV_MEDIA_LOADED) == 0) { bp->b_error = EIO; bp->b_flags |= B_ERROR; bp->b_resid = bp->b_bcount; biodone(bp); continue; } /* * We have a buf, now we should make a command * * First, translate the block to absolute and put it in terms * of the logical blocksize of the device. */ blkno = bp->b_blkno / (sd->sc_dk.dk_label->d_secsize / DEV_BSIZE); if (SDPART(bp->b_dev) != RAW_PART) { p = &sd->sc_dk.dk_label->d_partitions[SDPART(bp->b_dev)]; blkno += p->p_offset; } nblks = howmany(bp->b_bcount, sd->sc_dk.dk_label->d_secsize); /* * Fill out the scsi command. If the transfer will * fit in a "small" cdb, use it. */ if (!(sc_link->flags & SDEV_ATAPI) && !(sc_link->quirks & SDEV_ONLYBIG) && ((blkno & 0x1fffff) == blkno) && ((nblks & 0xff) == nblks)) { /* * We can fit in a small cdb. */ bzero(&cmd_small, sizeof(cmd_small)); cmd_small.opcode = (bp->b_flags & B_READ) ? READ_COMMAND : WRITE_COMMAND; _lto3b(blkno, cmd_small.addr); cmd_small.length = nblks & 0xff; cmdlen = sizeof(cmd_small); cmdp = (struct scsi_generic *)&cmd_small; } else { /* * Need a large cdb. */ bzero(&cmd_big, sizeof(cmd_big)); cmd_big.opcode = (bp->b_flags & B_READ) ? READ_BIG : WRITE_BIG; _lto4b(blkno, cmd_big.addr); _lto2b(nblks, cmd_big.length); cmdlen = sizeof(cmd_big); cmdp = (struct scsi_generic *)&cmd_big; } /* Instrumentation. */ disk_busy(&sd->sc_dk); /* * Call the routine that chats with the adapter. * Note: we cannot sleep as we may be an interrupt */ error = scsi_scsi_cmd(sc_link, cmdp, cmdlen, (u_char *)bp->b_data, bp->b_bcount, SDRETRIES, 60000, bp, SCSI_NOSLEEP | ((bp->b_flags & B_READ) ? SCSI_DATA_IN : SCSI_DATA_OUT)); switch (error) { case 0: /* * Mark the disk dirty so that the cache will be * flushed on close. */ if ((bp->b_flags & B_READ) == 0) sd->flags |= SDF_DIRTY; timeout_del(&sd->sc_timeout); break; case EAGAIN: /* * The device can't start another i/o. Try again later. */ dp->b_actf = bp; disk_unbusy(&sd->sc_dk, 0, 0); timeout_add(&sd->sc_timeout, 1); return; default: disk_unbusy(&sd->sc_dk, 0, 0); printf("%s: not queued, error %d\n", sd->sc_dev.dv_xname, error); break; } } } void sdrestart(v) void *v; { int s; s = splbio(); sdstart(v); splx(s); } void sddone(xs) struct scsi_xfer *xs; { struct sd_softc *sd = xs->sc_link->device_softc; if (sd->flags & SDF_FLUSHING) { /* Flush completed, no longer dirty. */ sd->flags &= ~(SDF_FLUSHING|SDF_DIRTY); } if (xs->bp != NULL) disk_unbusy(&sd->sc_dk, (xs->bp->b_bcount - xs->bp->b_resid), (xs->bp->b_flags & B_READ)); } void sdminphys(bp) struct buf *bp; { struct sd_softc *sd; long max; sd = sdlookup(SDUNIT(bp->b_dev)); if (sd == NULL) return; /* XXX - right way to fail this? */ /* * If the device is ancient, we want to make sure that * the transfer fits into a 6-byte cdb. * * XXX Note that the SCSI-I spec says that 256-block transfers * are allowed in a 6-byte read/write, and are specified * by setting the "length" to 0. However, we're conservative * here, allowing only 255-block transfers in case an * ancient device gets confused by length == 0. A length of 0 * in a 10-byte read/write actually means 0 blocks. */ if (sd->flags & SDF_ANCIENT) { max = sd->sc_dk.dk_label->d_secsize * 0xff; if (bp->b_bcount > max) bp->b_bcount = max; } (*sd->sc_link->adapter->scsi_minphys)(bp); device_unref(&sd->sc_dev); } int sdread(dev, uio, ioflag) dev_t dev; struct uio *uio; int ioflag; { return (physio(sdstrategy, NULL, dev, B_READ, sdminphys, uio)); } int sdwrite(dev, uio, ioflag) dev_t dev; struct uio *uio; int ioflag; { return (physio(sdstrategy, NULL, dev, B_WRITE, sdminphys, uio)); } /* * Perform special action on behalf of the user * Knows about the internals of this device */ int sdioctl(dev, cmd, addr, flag, p) dev_t dev; u_long cmd; caddr_t addr; int flag; struct proc *p; { struct sd_softc *sd; int error = 0; int part = SDPART(dev); sd = sdlookup(SDUNIT(dev)); if (sd == NULL) return ENXIO; SC_DEBUG(sd->sc_link, SDEV_DB2, ("sdioctl 0x%lx\n", cmd)); /* * If the device is not valid.. abandon ship */ if ((sd->sc_link->flags & SDEV_MEDIA_LOADED) == 0) { switch (cmd) { case DIOCWLABEL: case DIOCLOCK: case DIOCEJECT: case SCIOCIDENTIFY: case SCIOCCOMMAND: case SCIOCDEBUG: if (part == RAW_PART) break; /* FALLTHROUGH */ default: if ((sd->sc_link->flags & SDEV_OPEN) == 0) { error = ENODEV; goto exit; } else { error = EIO; goto exit; } } } switch (cmd) { case DIOCRLDINFO: sdgetdisklabel(dev, sd, sd->sc_dk.dk_label, sd->sc_dk.dk_cpulabel, 0); goto exit; case DIOCGPDINFO: { struct cpu_disklabel osdep; sdgetdisklabel(dev, sd, (struct disklabel *)addr, &osdep, 1); goto exit; } case DIOCGDINFO: *(struct disklabel *)addr = *(sd->sc_dk.dk_label); goto exit; case DIOCGPART: ((struct partinfo *)addr)->disklab = sd->sc_dk.dk_label; ((struct partinfo *)addr)->part = &sd->sc_dk.dk_label->d_partitions[SDPART(dev)]; goto exit; case DIOCWDINFO: case DIOCSDINFO: if ((flag & FWRITE) == 0) { error = EBADF; goto exit; } if ((error = sdlock(sd)) != 0) goto exit; sd->flags |= SDF_LABELLING; error = setdisklabel(sd->sc_dk.dk_label, (struct disklabel *)addr, /*sd->sc_dk.dk_openmask : */0, sd->sc_dk.dk_cpulabel); if (error == 0) { if (cmd == DIOCWDINFO) error = writedisklabel(SDLABELDEV(dev), sdstrategy, sd->sc_dk.dk_label, sd->sc_dk.dk_cpulabel); } sd->flags &= ~SDF_LABELLING; sdunlock(sd); goto exit; case DIOCWLABEL: if ((flag & FWRITE) == 0) { error = EBADF; goto exit; } if (*(int *)addr) sd->flags |= SDF_WLABEL; else sd->flags &= ~SDF_WLABEL; goto exit; case DIOCLOCK: error = scsi_prevent(sd->sc_link, (*(int *)addr) ? PR_PREVENT : PR_ALLOW, 0); goto exit; case MTIOCTOP: if (((struct mtop *)addr)->mt_op != MTOFFL) { error = EIO; goto exit; } /* FALLTHROUGH */ case DIOCEJECT: if ((sd->sc_link->flags & SDEV_REMOVABLE) == 0) { error = ENOTTY; goto exit; } sd->sc_link->flags |= SDEV_EJECTING; goto exit; default: if (part != RAW_PART) { error = ENOTTY; goto exit; } error = scsi_do_ioctl(sd->sc_link, dev, cmd, addr, flag, p); } exit: device_unref(&sd->sc_dev); return (error); } /* * Load the label information on the named device */ void sdgetdisklabel(dev, sd, lp, clp, spoofonly) dev_t dev; struct sd_softc *sd; struct disklabel *lp; struct cpu_disklabel *clp; int spoofonly; { size_t len; char *errstring, packname[sizeof(lp->d_packname) + 1]; char product[17], vendor[9]; bzero(lp, sizeof(struct disklabel)); bzero(clp, sizeof(struct cpu_disklabel)); lp->d_secsize = sd->params.blksize; lp->d_ntracks = sd->params.heads; lp->d_nsectors = sd->params.sectors; lp->d_ncylinders = sd->params.cyls; lp->d_secpercyl = lp->d_ntracks * lp->d_nsectors; if (lp->d_secpercyl == 0) { lp->d_secpercyl = 100; /* as long as it's not 0 - readdisklabel divides by it */ } lp->d_type = DTYPE_SCSI; if ((sd->sc_link->inqdata.device & SID_TYPE) == T_OPTICAL) strncpy(lp->d_typename, "SCSI optical", sizeof(lp->d_typename)); else strncpy(lp->d_typename, "SCSI disk", sizeof(lp->d_typename)); /* * Try to fit ' ' into d_packname. If that doesn't fit * then leave out ' ' and use only as much of '' as * does fit. */ viscpy(vendor, sd->sc_link->inqdata.vendor, 8); viscpy(product, sd->sc_link->inqdata.product, 16); len = snprintf(packname, sizeof(packname), "%s %s", vendor, product); if (len > sizeof(lp->d_packname)) { strlcpy(packname, product, sizeof(packname)); len = strlen(packname); } /* * It is safe to use len as the count of characters to copy because * packname is sizeof(lp->d_packname)+1, the string in packname is * always null terminated and len does not count the terminating null. * d_packname is not a null terminated string. */ bcopy(packname, lp->d_packname, len); lp->d_secperunit = sd->params.disksize; lp->d_rpm = sd->params.rot_rate; lp->d_interleave = 1; lp->d_flags = 0; /* XXX - these values for BBSIZE and SBSIZE assume ffs */ lp->d_bbsize = BBSIZE; lp->d_sbsize = SBSIZE; lp->d_partitions[RAW_PART].p_offset = 0; lp->d_partitions[RAW_PART].p_size = lp->d_secperunit; lp->d_partitions[RAW_PART].p_fstype = FS_UNUSED; lp->d_npartitions = RAW_PART + 1; lp->d_magic = DISKMAGIC; lp->d_magic2 = DISKMAGIC; lp->d_checksum = dkcksum(lp); /* * Call the generic disklabel extraction routine */ errstring = readdisklabel(SDLABELDEV(dev), sdstrategy, lp, clp, spoofonly); if (errstring) { /*printf("%s: %s\n", sd->sc_dev.dv_xname, errstring);*/ return; } } void sd_shutdown(arg) void *arg; { struct sd_softc *sd = arg; /* * If the disk cache needs to be flushed, and the disk supports * it, flush it. We're cold at this point, so we poll for * completion. */ if ((sd->flags & SDF_DIRTY) != 0) sd_flush(sd, SCSI_AUTOCONF); timeout_del(&sd->sc_timeout); } /* * Tell the device to map out a defective block */ int sd_reassign_blocks(sd, blkno) struct sd_softc *sd; u_long blkno; { struct scsi_reassign_blocks scsi_cmd; struct scsi_reassign_blocks_data rbdata; bzero(&scsi_cmd, sizeof(scsi_cmd)); bzero(&rbdata, sizeof(rbdata)); scsi_cmd.opcode = REASSIGN_BLOCKS; _lto2b(sizeof(rbdata.defect_descriptor[0]), rbdata.length); _lto4b(blkno, rbdata.defect_descriptor[0].dlbaddr); return scsi_scsi_cmd(sd->sc_link, (struct scsi_generic *)&scsi_cmd, sizeof(scsi_cmd), (u_char *)&rbdata, sizeof(rbdata), SDRETRIES, 5000, NULL, SCSI_DATA_OUT); } /* * Check Errors */ int sd_interpret_sense(xs) struct scsi_xfer *xs; { struct scsi_sense_data *sense = &xs->sense; struct scsi_link *sc_link = xs->sc_link; struct sd_softc *sd = sc_link->device_softc; u_int8_t serr = sense->error_code & SSD_ERRCODE; int retval; /* * Let the generic code handle everything except a few categories of * LUN not ready errors on open devices. */ if (((sc_link->flags & SDEV_OPEN) == 0) || (serr != SSD_ERRCODE_CURRENT && serr != SSD_ERRCODE_DEFERRED) || ((sense->flags & SSD_KEY) != SKEY_NOT_READY) || (sense->extra_len < 6)) return (EJUSTRETURN); switch (ASC_ASCQ(sense)) { case SENSE_NOT_READY_BECOMING_READY: SC_DEBUG(sc_link, SDEV_DB1, ("becoming ready.\n")); retval = scsi_delay(xs, 5); break; case SENSE_NOT_READY_INIT_REQUIRED: SC_DEBUG(sc_link, SDEV_DB1, ("spinning up\n")); retval = scsi_start(sd->sc_link, SSS_START, SCSI_IGNORE_ILLEGAL_REQUEST | SCSI_URGENT | SCSI_NOSLEEP); if (retval == 0) retval = ERESTART; else SC_DEBUG(sc_link, SDEV_DB1, ("spin up failed (%#x)\n", retval)); break; default: retval = EJUSTRETURN; break; } return (retval); } int sdsize(dev) dev_t dev; { struct sd_softc *sd; int part, omask; int size; sd = sdlookup(SDUNIT(dev)); if (sd == NULL) return -1; part = SDPART(dev); omask = sd->sc_dk.dk_openmask & (1 << part); if (omask == 0 && sdopen(dev, 0, S_IFBLK, NULL) != 0) { size = -1; goto exit; } if ((sd->sc_link->flags & SDEV_MEDIA_LOADED) == 0) size = -1; else if (sd->sc_dk.dk_label->d_partitions[part].p_fstype != FS_SWAP) size = -1; else size = sd->sc_dk.dk_label->d_partitions[part].p_size * (sd->sc_dk.dk_label->d_secsize / DEV_BSIZE); if (omask == 0 && sdclose(dev, 0, S_IFBLK, NULL) != 0) size = -1; exit: device_unref(&sd->sc_dev); return size; } /* #define SD_DUMP_NOT_TRUSTED if you just want to watch */ static struct scsi_xfer sx; static int sddoingadump; /* * dump all of physical memory into the partition specified, starting * at offset 'dumplo' into the partition. */ int sddump(dev, blkno, va, size) dev_t dev; daddr_t blkno; caddr_t va; size_t size; { struct sd_softc *sd; /* disk unit to do the I/O */ struct disklabel *lp; /* disk's disklabel */ int unit, part; int sectorsize; /* size of a disk sector */ int nsects; /* number of sectors in partition */ int sectoff; /* sector offset of partition */ int totwrt; /* total number of sectors left to write */ int nwrt; /* current number of sectors to write */ struct scsi_rw_big cmd; /* write command */ struct scsi_xfer *xs; /* ... convenience */ int retval; /* Check if recursive dump; if so, punt. */ if (sddoingadump) return EFAULT; /* Mark as active early. */ sddoingadump = 1; unit = SDUNIT(dev); /* Decompose unit & partition. */ part = SDPART(dev); /* Check for acceptable drive number. */ if (unit >= sd_cd.cd_ndevs || (sd = sd_cd.cd_devs[unit]) == NULL) return ENXIO; /* * XXX Can't do this check, since the media might have been * XXX marked `invalid' by successful unmounting of all * XXX filesystems. */ #if 0 /* Make sure it was initialized. */ if ((sd->sc_link->flags & SDEV_MEDIA_LOADED) != SDEV_MEDIA_LOADED) return ENXIO; #endif /* Convert to disk sectors. Request must be a multiple of size. */ lp = sd->sc_dk.dk_label; sectorsize = lp->d_secsize; if ((size % sectorsize) != 0) return EFAULT; totwrt = size / sectorsize; blkno = dbtob(blkno) / sectorsize; /* blkno in DEV_BSIZE units */ nsects = lp->d_partitions[part].p_size; sectoff = lp->d_partitions[part].p_offset; /* Check transfer bounds against partition size. */ if ((blkno < 0) || ((blkno + totwrt) > nsects)) return EINVAL; /* Offset block number to start of partition. */ blkno += sectoff; xs = &sx; while (totwrt > 0) { nwrt = totwrt; /* XXX */ #ifndef SD_DUMP_NOT_TRUSTED /* * Fill out the scsi command */ bzero(&cmd, sizeof(cmd)); cmd.opcode = WRITE_BIG; _lto4b(blkno, cmd.addr); _lto2b(nwrt, cmd.length); /* * Fill out the scsi_xfer structure * Note: we cannot sleep as we may be an interrupt * don't use scsi_scsi_cmd() as it may want * to wait for an xs. */ bzero(xs, sizeof(sx)); xs->flags |= SCSI_AUTOCONF | SCSI_DATA_OUT; xs->sc_link = sd->sc_link; xs->retries = SDRETRIES; xs->timeout = 10000; /* 10000 millisecs for a disk ! */ xs->cmd = (struct scsi_generic *)&cmd; xs->cmdlen = sizeof(cmd); xs->resid = nwrt * sectorsize; xs->error = XS_NOERROR; xs->bp = NULL; xs->data = va; xs->datalen = nwrt * sectorsize; /* * Pass all this info to the scsi driver. */ retval = (*(sd->sc_link->adapter->scsi_cmd)) (xs); if (retval != COMPLETE) return ENXIO; #else /* SD_DUMP_NOT_TRUSTED */ /* Let's just talk about this first... */ printf("sd%d: dump addr 0x%x, blk %d\n", unit, va, blkno); delay(500 * 1000); /* half a second */ #endif /* SD_DUMP_NOT_TRUSTED */ /* update block count */ totwrt -= nwrt; blkno += nwrt; va += sectorsize * nwrt; } sddoingadump = 0; return 0; } /* * Copy up to len chars from src to dst, ignoring non-printables. * Must be room for len+1 chars in dst so we can write the NUL. * Does not assume src is NUL-terminated. */ void viscpy(dst, src, len) u_char *dst; u_char *src; int len; { while (len > 0 && *src != '\0') { if (*src < 0x20 || *src >= 0x80) { src++; continue; } *dst++ = *src++; len--; } *dst = '\0'; } /* * Fill out the disk parameter structure. Return SDGP_RESULT_OK if the * structure is correctly filled in, SDGP_RESULT_OFFLINE otherwise. The caller * is responsible for clearing the SDEV_MEDIA_LOADED flag if the structure * cannot be completed. */ int sd_get_parms(sd, dp, flags) struct sd_softc *sd; struct disk_parms *dp; int flags; { union scsi_mode_sense_buf *buf = NULL; struct page_rigid_geometry *rigid; struct page_flex_geometry *flex; struct page_reduced_geometry *reduced; u_int32_t heads = 0, sectors = 0, cyls = 0, blksize, ssblksize; u_int16_t rpm = 0; dp->disksize = scsi_size(sd->sc_link, flags, &ssblksize); /* * Many UMASS devices choke when asked about their geometry. Most * don't have a meaningful geometry anyway, so just fake it if * scsi_size() worked. */ if ((sd->sc_link->flags & SDEV_UMASS) && (dp->disksize > 0)) goto validate; /* N.B. buf will be NULL at validate. */ buf = malloc(sizeof(*buf), M_TEMP, M_NOWAIT); if (buf == NULL) goto validate; switch (sd->sc_link->inqdata.device & SID_TYPE) { case T_OPTICAL: /* No more information needed or available. */ break; case T_RDIRECT: /* T_RDIRECT supports only PAGE_REDUCED_GEOMETRY (6). */ scsi_do_mode_sense(sd->sc_link, PAGE_REDUCED_GEOMETRY, buf, (void **)&reduced, NULL, NULL, &blksize, sizeof(*reduced), flags | SCSI_SILENT, NULL); if (DISK_PGCODE(reduced, PAGE_REDUCED_GEOMETRY)) { if (dp->disksize == 0) dp->disksize = _5btol(reduced->sectors); if (blksize == 0) blksize = _2btol(reduced->bytes_s); } break; default: /* * NOTE: Some devices leave off the last four bytes of * PAGE_RIGID_GEOMETRY and PAGE_FLEX_GEOMETRY mode sense pages. * The only information in those four bytes is RPM information * so accept the page. The extra bytes will be zero and RPM will * end up with the default value of 3600. */ rigid = NULL; if (((sd->sc_link->flags & SDEV_ATAPI) == 0) || ((sd->sc_link->flags & SDEV_REMOVABLE) == 0)) scsi_do_mode_sense(sd->sc_link, PAGE_RIGID_GEOMETRY, buf, (void **)&rigid, NULL, NULL, &blksize, sizeof(*rigid) - 4, flags | SCSI_SILENT, NULL); if (DISK_PGCODE(rigid, PAGE_RIGID_GEOMETRY)) { heads = rigid->nheads; cyls = _3btol(rigid->ncyl); rpm = _2btol(rigid->rpm); if (heads * cyls > 0) sectors = dp->disksize / (heads * cyls); } else { scsi_do_mode_sense(sd->sc_link, PAGE_FLEX_GEOMETRY, buf, (void **)&flex, NULL, NULL, &blksize, sizeof(*flex) - 4, flags | SCSI_SILENT, NULL); if (DISK_PGCODE(flex, PAGE_FLEX_GEOMETRY)) { sectors = flex->ph_sec_tr; heads = flex->nheads; cyls = _2btol(flex->ncyl); rpm = _2btol(flex->rpm); if (blksize == 0) blksize = _2btol(flex->bytes_s); if (dp->disksize == 0) dp->disksize = heads * cyls * sectors; } } break; } validate: if (buf) free(buf, M_TEMP); if (dp->disksize == 0) return (SDGP_RESULT_OFFLINE); if (ssblksize > 0) dp->blksize = ssblksize; else dp->blksize = (blksize == 0) ? 512 : blksize; /* * Restrict blksize values to powers of two between 512 and 64k. */ switch (dp->blksize) { case 0x200: /* == 512, == DEV_BSIZE on all architectures. */ case 0x400: case 0x800: case 0x1000: case 0x2000: case 0x4000: case 0x8000: case 0x10000: break; default: SC_DEBUG(sd->sc_link, SDEV_DB1, ("sd_get_parms: bad blksize: %#x\n", dp->blksize)); return (SDGP_RESULT_OFFLINE); } /* * Use Adaptec standard geometry values for anything we still don't * know. */ dp->heads = (heads == 0) ? 64 : heads; dp->sectors = (sectors == 0) ? 32 : sectors; dp->rot_rate = (rpm == 0) ? 3600 : rpm; /* * XXX THINK ABOUT THIS!! Using values such that sectors * heads * * cyls is <= disk_size can lead to wasted space. We need a more * careful calculation/validation to make everything work out * optimally. */ dp->cyls = (cyls == 0) ? dp->disksize / (dp->heads * dp->sectors) : cyls; return (SDGP_RESULT_OK); } void sd_flush(sd, flags) struct sd_softc *sd; int flags; { struct scsi_link *sc_link = sd->sc_link; struct scsi_synchronize_cache sync_cmd; /* * If the device is SCSI-2, issue a SYNCHRONIZE CACHE. * We issue with address 0 length 0, which should be * interpreted by the device as "all remaining blocks * starting at address 0". We ignore ILLEGAL REQUEST * in the event that the command is not supported by * the device, and poll for completion so that we know * that the cache has actually been flushed. * * Unless, that is, the device can't handle the SYNCHRONIZE CACHE * command, as indicated by our quirks flags. * * XXX What about older devices? */ if (SCSISPC(sc_link->inqdata.version) >= 2 && (sc_link->quirks & SDEV_NOSYNCCACHE) == 0) { bzero(&sync_cmd, sizeof(sync_cmd)); sync_cmd.opcode = SYNCHRONIZE_CACHE; if (scsi_scsi_cmd(sc_link, (struct scsi_generic *)&sync_cmd, sizeof(sync_cmd), NULL, 0, SDRETRIES, 100000, NULL, flags|SCSI_IGNORE_ILLEGAL_REQUEST)) printf("%s: WARNING: cache synchronization failed\n", sd->sc_dev.dv_xname); else sd->flags |= SDF_FLUSHING; } }