/* $OpenBSD: sd.c,v 1.245 2012/12/19 19:52:11 kettenis Exp $ */ /* $NetBSD: sd.c,v 1.111 1997/04/02 02:29:41 mycroft Exp $ */ /*- * Copyright (c) 1998 The NetBSD Foundation, Inc. * All rights reserved. * * This code is derived from software contributed to The NetBSD Foundation * by Charles M. Hannum. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. */ /* * Originally written by Julian Elischer (julian@dialix.oz.au) * for TRW Financial Systems for use under the MACH(2.5) operating system. * * TRW Financial Systems, in accordance with their agreement with Carnegie * Mellon University, makes this software available to CMU to distribute * or use in any manner that they see fit as long as this message is kept with * the software. For this reason TFS also grants any other persons or * organisations permission to use or modify this software. * * TFS supplies this software to be publicly redistributed * on the understanding that TFS is not responsible for the correct * functioning of this software in any circumstances. * * Ported to run under 386BSD by Julian Elischer (julian@dialix.oz.au) Sept 1992 */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include /* for BBSIZE and SBSIZE */ #include int sdmatch(struct device *, void *, void *); void sdattach(struct device *, struct device *, void *); int sdactivate(struct device *, int); int sddetach(struct device *, int); void sdminphys(struct buf *); int sdgetdisklabel(dev_t, struct sd_softc *, struct disklabel *, int); void sdstart(struct scsi_xfer *); void sd_shutdown(void *); int sd_interpret_sense(struct scsi_xfer *); int sd_read_cap_10(struct sd_softc *, int); int sd_read_cap_16(struct sd_softc *, int); int sd_size(struct sd_softc *, int); int sd_thin_pages(struct sd_softc *, int); int sd_vpd_block_limits(struct sd_softc *, int); int sd_vpd_thin(struct sd_softc *, int); int sd_thin_params(struct sd_softc *, int); int sd_get_parms(struct sd_softc *, struct disk_parms *, int); void sd_flush(struct sd_softc *, int); void viscpy(u_char *, u_char *, int); int sd_ioctl_inquiry(struct sd_softc *, struct dk_inquiry *); int sd_ioctl_cache(struct sd_softc *, long, struct dk_cache *); void sd_cmd_rw6(struct scsi_xfer *, int, daddr64_t, u_int); void sd_cmd_rw10(struct scsi_xfer *, int, daddr64_t, u_int); void sd_cmd_rw12(struct scsi_xfer *, int, daddr64_t, u_int); void sd_cmd_rw16(struct scsi_xfer *, int, daddr64_t, u_int); void sd_buf_done(struct scsi_xfer *); struct cfattach sd_ca = { sizeof(struct sd_softc), sdmatch, sdattach, sddetach, sdactivate }; struct cfdriver sd_cd = { NULL, "sd", DV_DISK }; const struct scsi_inquiry_pattern sd_patterns[] = { {T_DIRECT, T_FIXED, "", "", ""}, {T_DIRECT, T_REMOV, "", "", ""}, {T_RDIRECT, T_FIXED, "", "", ""}, {T_RDIRECT, T_REMOV, "", "", ""}, {T_OPTICAL, T_FIXED, "", "", ""}, {T_OPTICAL, T_REMOV, "", "", ""}, }; #define sdlookup(unit) (struct sd_softc *)disk_lookup(&sd_cd, (unit)) int sdmatch(struct device *parent, void *match, void *aux) { struct scsi_attach_args *sa = aux; int priority; (void)scsi_inqmatch(sa->sa_inqbuf, sd_patterns, nitems(sd_patterns), sizeof(sd_patterns[0]), &priority); return (priority); } /* * The routine called by the low level scsi routine when it discovers * a device suitable for this driver. */ void sdattach(struct device *parent, struct device *self, void *aux) { struct sd_softc *sc = (struct sd_softc *)self; struct scsi_attach_args *sa = aux; struct disk_parms *dp = &sc->params; struct scsi_link *sc_link = sa->sa_sc_link; int sd_autoconf = scsi_autoconf | SCSI_SILENT | SCSI_IGNORE_ILLEGAL_REQUEST | SCSI_IGNORE_MEDIA_CHANGE; struct dk_cache dkc; int error, result, sortby = BUFQ_DEFAULT; SC_DEBUG(sc_link, SDEV_DB2, ("sdattach:\n")); /* * Store information needed to contact our base driver */ sc->sc_link = sc_link; sc_link->interpret_sense = sd_interpret_sense; sc_link->device_softc = sc; if ((sc_link->flags & SDEV_ATAPI) && (sc_link->flags & SDEV_REMOVABLE)) sc_link->quirks |= SDEV_NOSYNCCACHE; if (!(sc_link->inqdata.flags & SID_RelAdr)) sc_link->quirks |= SDEV_ONLYBIG; /* * Note if this device is ancient. This is used in sdminphys(). */ if (!(sc_link->flags & SDEV_ATAPI) && SCSISPC(sa->sa_inqbuf->version) == 0) sc->flags |= SDF_ANCIENT; /* * Use the subdriver to request information regarding * the drive. We cannot use interrupts yet, so the * request must specify this. */ printf("\n"); scsi_xsh_set(&sc->sc_xsh, sc_link, sdstart); timeout_set(&sc->sc_timeout, (void (*)(void *))scsi_xsh_add, &sc->sc_xsh); /* Spin up non-UMASS devices ready or not. */ if ((sc->sc_link->flags & SDEV_UMASS) == 0) scsi_start(sc_link, SSS_START, sd_autoconf); /* * Some devices (e.g. Blackberry Pearl) won't admit they have * media loaded unless its been locked in. */ if ((sc_link->flags & SDEV_REMOVABLE) != 0) scsi_prevent(sc_link, PR_PREVENT, sd_autoconf); /* Check that it is still responding and ok. */ error = scsi_test_unit_ready(sc->sc_link, TEST_READY_RETRIES * 3, sd_autoconf); if (error) result = SDGP_RESULT_OFFLINE; else result = sd_get_parms(sc, &sc->params, sd_autoconf); if ((sc_link->flags & SDEV_REMOVABLE) != 0) scsi_prevent(sc_link, PR_ALLOW, sd_autoconf); switch (result) { case SDGP_RESULT_OK: printf("%s: %lldMB, %lu bytes/sector, %lld sectors", sc->sc_dev.dv_xname, dp->disksize / (1048576 / dp->secsize), dp->secsize, dp->disksize); if (ISSET(sc->flags, SDF_THIN)) { sortby = BUFQ_FIFO; printf(", thin"); } printf("\n"); break; case SDGP_RESULT_OFFLINE: break; #ifdef DIAGNOSTIC default: panic("sdattach: unknown result (%#x) from get_parms", result); break; #endif } /* * Initialize disk structures. */ sc->sc_dk.dk_name = sc->sc_dev.dv_xname; bufq_init(&sc->sc_bufq, sortby); /* * Enable write cache by default. */ memset(&dkc, 0, sizeof(dkc)); if (sd_ioctl_cache(sc, DIOCGCACHE, &dkc) == 0 && dkc.wrcache == 0) { dkc.wrcache = 1; sd_ioctl_cache(sc, DIOCSCACHE, &dkc); } /* * Establish a shutdown hook so that we can ensure that * our data has actually made it onto the platter at * shutdown time. Note that this relies on the fact * that the shutdown hook code puts us at the head of * the list (thus guaranteeing that our hook runs before * our ancestors'). */ if ((sc->sc_sdhook = shutdownhook_establish(sd_shutdown, sc)) == NULL) printf("%s: WARNING: unable to establish shutdown hook\n", sc->sc_dev.dv_xname); /* Attach disk. */ disk_attach(&sc->sc_dev, &sc->sc_dk); } int sdactivate(struct device *self, int act) { struct sd_softc *sc = (struct sd_softc *)self; int rv = 0; switch (act) { case DVACT_SUSPEND: /* * We flush the cache, since we our next step before * DVACT_POWERDOWN might be a hibernate operation. */ if ((sc->flags & SDF_DIRTY) != 0) sd_flush(sc, SCSI_AUTOCONF); break; case DVACT_POWERDOWN: /* * Stop the disk. Stopping the disk should flush the * cache, but we are paranoid so we flush the cache * first. */ if ((sc->flags & SDF_DIRTY) != 0) sd_flush(sc, SCSI_AUTOCONF); if (boothowto & RB_POWERDOWN) scsi_start(sc->sc_link, SSS_STOP, SCSI_IGNORE_ILLEGAL_REQUEST | SCSI_AUTOCONF); break; case DVACT_RESUME: scsi_start(sc->sc_link, SSS_START, SCSI_IGNORE_ILLEGAL_REQUEST | SCSI_AUTOCONF); break; case DVACT_DEACTIVATE: sc->flags |= SDF_DYING; scsi_xsh_del(&sc->sc_xsh); break; } return (rv); } int sddetach(struct device *self, int flags) { struct sd_softc *sc = (struct sd_softc *)self; bufq_drain(&sc->sc_bufq); disk_gone(sdopen, self->dv_unit); /* Get rid of the shutdown hook. */ if (sc->sc_sdhook != NULL) shutdownhook_disestablish(sc->sc_sdhook); /* Detach disk. */ bufq_destroy(&sc->sc_bufq); disk_detach(&sc->sc_dk); return (0); } /* * Open the device. Make sure the partition info is as up-to-date as can be. */ int sdopen(dev_t dev, int flag, int fmt, struct proc *p) { struct scsi_link *sc_link; struct sd_softc *sc; int error = 0, part, rawopen, unit; unit = DISKUNIT(dev); part = DISKPART(dev); rawopen = (part == RAW_PART) && (fmt == S_IFCHR); sc = sdlookup(unit); if (sc == NULL) return (ENXIO); sc_link = sc->sc_link; if (sc->flags & SDF_DYING) { device_unref(&sc->sc_dev); return (ENXIO); } if (ISSET(flag, FWRITE) && ISSET(sc_link->flags, SDEV_READONLY)) { device_unref(&sc->sc_dev); return (EACCES); } SC_DEBUG(sc_link, SDEV_DB1, ("sdopen: dev=0x%x (unit %d (of %d), partition %d)\n", dev, unit, sd_cd.cd_ndevs, part)); if ((error = disk_lock(&sc->sc_dk)) != 0) { device_unref(&sc->sc_dev); return (error); } if (sc->sc_dk.dk_openmask != 0) { /* * If any partition is open, but the disk has been invalidated, * disallow further opens of non-raw partition. */ if ((sc_link->flags & SDEV_MEDIA_LOADED) == 0) { if (rawopen) goto out; error = EIO; goto bad; } } else { /* Spin up non-UMASS devices ready or not. */ if ((sc->sc_link->flags & SDEV_UMASS) == 0) scsi_start(sc_link, SSS_START, (rawopen ? SCSI_SILENT : 0) | SCSI_IGNORE_ILLEGAL_REQUEST | SCSI_IGNORE_MEDIA_CHANGE); /* Use sd_interpret_sense() for sense errors. * * But only after spinning the disk up! Just in case a broken * device returns "Initialization command required." and causes * a loop of scsi_start() calls. */ sc_link->flags |= SDEV_OPEN; /* * Try to prevent the unloading of a removable device while * it's open. But allow the open to proceed if the device can't * be locked in. */ if ((sc_link->flags & SDEV_REMOVABLE) != 0) { scsi_prevent(sc_link, PR_PREVENT, SCSI_SILENT | SCSI_IGNORE_ILLEGAL_REQUEST | SCSI_IGNORE_MEDIA_CHANGE); } /* Check that it is still responding and ok. */ error = scsi_test_unit_ready(sc_link, TEST_READY_RETRIES, SCSI_SILENT | SCSI_IGNORE_ILLEGAL_REQUEST | SCSI_IGNORE_MEDIA_CHANGE); if (error) { if (rawopen) { error = 0; goto out; } else goto bad; } /* Load the physical device parameters. */ sc_link->flags |= SDEV_MEDIA_LOADED; if (sd_get_parms(sc, &sc->params, (rawopen ? SCSI_SILENT : 0)) == SDGP_RESULT_OFFLINE) { sc_link->flags &= ~SDEV_MEDIA_LOADED; error = ENXIO; goto bad; } SC_DEBUG(sc_link, SDEV_DB3, ("Params loaded\n")); /* Load the partition info if not already loaded. */ if (sdgetdisklabel(dev, sc, sc->sc_dk.dk_label, 0) == EIO) { error = EIO; goto bad; } SC_DEBUG(sc_link, SDEV_DB3, ("Disklabel loaded\n")); } out: if ((error = disk_openpart(&sc->sc_dk, part, fmt, 1)) != 0) goto bad; SC_DEBUG(sc_link, SDEV_DB3, ("open complete\n")); /* It's OK to fall through because dk_openmask is now non-zero. */ bad: if (sc->sc_dk.dk_openmask == 0) { if ((sc->sc_link->flags & SDEV_REMOVABLE) != 0) scsi_prevent(sc_link, PR_ALLOW, SCSI_SILENT | SCSI_IGNORE_ILLEGAL_REQUEST | SCSI_IGNORE_MEDIA_CHANGE); sc_link->flags &= ~(SDEV_OPEN | SDEV_MEDIA_LOADED); } disk_unlock(&sc->sc_dk); device_unref(&sc->sc_dev); return (error); } /* * Close the device. Only called if we are the last occurrence of an open * device. Convenient now but usually a pain. */ int sdclose(dev_t dev, int flag, int fmt, struct proc *p) { struct sd_softc *sc; int part = DISKPART(dev); sc = sdlookup(DISKUNIT(dev)); if (sc == NULL) return (ENXIO); if (sc->flags & SDF_DYING) { device_unref(&sc->sc_dev); return (ENXIO); } disk_lock_nointr(&sc->sc_dk); disk_closepart(&sc->sc_dk, part, fmt); if (sc->sc_dk.dk_openmask == 0) { if ((sc->flags & SDF_DIRTY) != 0) sd_flush(sc, 0); if ((sc->sc_link->flags & SDEV_REMOVABLE) != 0) scsi_prevent(sc->sc_link, PR_ALLOW, SCSI_IGNORE_ILLEGAL_REQUEST | SCSI_IGNORE_NOT_READY | SCSI_SILENT); sc->sc_link->flags &= ~(SDEV_OPEN | SDEV_MEDIA_LOADED); if (sc->sc_link->flags & SDEV_EJECTING) { scsi_start(sc->sc_link, SSS_STOP|SSS_LOEJ, 0); sc->sc_link->flags &= ~SDEV_EJECTING; } timeout_del(&sc->sc_timeout); scsi_xsh_del(&sc->sc_xsh); } disk_unlock(&sc->sc_dk); device_unref(&sc->sc_dev); return 0; } /* * Actually translate the requested transfer into one the physical driver * can understand. The transfer is described by a buf and will include * only one physical transfer. */ void sdstrategy(struct buf *bp) { struct sd_softc *sc; int s; sc = sdlookup(DISKUNIT(bp->b_dev)); if (sc == NULL) { bp->b_error = ENXIO; goto bad; } if (sc->flags & SDF_DYING) { bp->b_error = ENXIO; goto bad; } SC_DEBUG(sc->sc_link, SDEV_DB2, ("sdstrategy: %ld bytes @ blk %d\n", bp->b_bcount, bp->b_blkno)); /* * If the device has been made invalid, error out */ if ((sc->sc_link->flags & SDEV_MEDIA_LOADED) == 0) { if (sc->sc_link->flags & SDEV_OPEN) bp->b_error = EIO; else bp->b_error = ENODEV; goto bad; } /* Validate the request. */ if (bounds_check_with_label(bp, sc->sc_dk.dk_label) == -1) goto done; /* Place it in the queue of disk activities for this disk. */ bufq_queue(&sc->sc_bufq, bp); /* * Tell the device to get going on the transfer if it's * not doing anything, otherwise just wait for completion */ scsi_xsh_add(&sc->sc_xsh); device_unref(&sc->sc_dev); return; bad: bp->b_flags |= B_ERROR; bp->b_resid = bp->b_bcount; done: s = splbio(); biodone(bp); splx(s); if (sc != NULL) device_unref(&sc->sc_dev); } void sd_cmd_rw6(struct scsi_xfer *xs, int read, daddr64_t secno, u_int nsecs) { struct scsi_rw *cmd = (struct scsi_rw *)xs->cmd; cmd->opcode = read ? READ_COMMAND : WRITE_COMMAND; _lto3b(secno, cmd->addr); cmd->length = nsecs; xs->cmdlen = sizeof(*cmd); } void sd_cmd_rw10(struct scsi_xfer *xs, int read, daddr64_t secno, u_int nsecs) { struct scsi_rw_big *cmd = (struct scsi_rw_big *)xs->cmd; cmd->opcode = read ? READ_BIG : WRITE_BIG; _lto4b(secno, cmd->addr); _lto2b(nsecs, cmd->length); xs->cmdlen = sizeof(*cmd); } void sd_cmd_rw12(struct scsi_xfer *xs, int read, daddr64_t secno, u_int nsecs) { struct scsi_rw_12 *cmd = (struct scsi_rw_12 *)xs->cmd; cmd->opcode = read ? READ_12 : WRITE_12; _lto4b(secno, cmd->addr); _lto4b(nsecs, cmd->length); xs->cmdlen = sizeof(*cmd); } void sd_cmd_rw16(struct scsi_xfer *xs, int read, daddr64_t secno, u_int nsecs) { struct scsi_rw_16 *cmd = (struct scsi_rw_16 *)xs->cmd; cmd->opcode = read ? READ_16 : WRITE_16; _lto8b(secno, cmd->addr); _lto4b(nsecs, cmd->length); xs->cmdlen = sizeof(*cmd); } /* * sdstart looks to see if there is a buf waiting for the device * and that the device is not already busy. If both are true, * It dequeues the buf and creates a scsi command to perform the * transfer in the buf. The transfer request will call scsi_done * on completion, which will in turn call this routine again * so that the next queued transfer is performed. * The bufs are queued by the strategy routine (sdstrategy) * * This routine is also called after other non-queued requests * have been made of the scsi driver, to ensure that the queue * continues to be drained. */ void sdstart(struct scsi_xfer *xs) { struct scsi_link *link = xs->sc_link; struct sd_softc *sc = link->device_softc; struct buf *bp; daddr64_t secno; int nsecs; int read; struct partition *p; if (sc->flags & SDF_DYING) { scsi_xs_put(xs); return; } if ((link->flags & SDEV_MEDIA_LOADED) == 0) { bufq_drain(&sc->sc_bufq); scsi_xs_put(xs); return; } bp = bufq_dequeue(&sc->sc_bufq); if (bp == NULL) { scsi_xs_put(xs); return; } secno = bp->b_blkno / (sc->sc_dk.dk_label->d_secsize / DEV_BSIZE); p = &sc->sc_dk.dk_label->d_partitions[DISKPART(bp->b_dev)]; secno += DL_GETPOFFSET(p); nsecs = howmany(bp->b_bcount, sc->sc_dk.dk_label->d_secsize); read = bp->b_flags & B_READ; /* * Fill out the scsi command. If the transfer will * fit in a "small" cdb, use it. */ if (!(link->flags & SDEV_ATAPI) && !(link->quirks & SDEV_ONLYBIG) && ((secno & 0x1fffff) == secno) && ((nsecs & 0xff) == nsecs)) sd_cmd_rw6(xs, read, secno, nsecs); else if (((secno & 0xffffffff) == secno) && ((nsecs & 0xffff) == nsecs)) sd_cmd_rw10(xs, read, secno, nsecs); else if (((secno & 0xffffffff) == secno) && ((nsecs & 0xffffffff) == nsecs)) sd_cmd_rw12(xs, read, secno, nsecs); else sd_cmd_rw16(xs, read, secno, nsecs); xs->flags |= (read ? SCSI_DATA_IN : SCSI_DATA_OUT); xs->timeout = 60000; xs->data = bp->b_data; xs->datalen = bp->b_bcount; xs->done = sd_buf_done; xs->cookie = bp; xs->bp = bp; /* Instrumentation. */ disk_busy(&sc->sc_dk); /* Mark disk as dirty. */ if (!read) sc->flags |= SDF_DIRTY; scsi_xs_exec(xs); /* move onto the next io */ if (ISSET(sc->flags, SDF_WAITING)) CLR(sc->flags, SDF_WAITING); else if (bufq_peek(&sc->sc_bufq)) scsi_xsh_add(&sc->sc_xsh); } void sd_buf_done(struct scsi_xfer *xs) { struct sd_softc *sc = xs->sc_link->device_softc; struct buf *bp = xs->cookie; int error, s; switch (xs->error) { case XS_NOERROR: bp->b_error = 0; bp->b_resid = xs->resid; break; case XS_NO_CCB: /* The adapter is busy, requeue the buf and try it later. */ disk_unbusy(&sc->sc_dk, bp->b_bcount - xs->resid, bp->b_flags & B_READ); bufq_requeue(&sc->sc_bufq, bp); scsi_xs_put(xs); SET(sc->flags, SDF_WAITING); timeout_add(&sc->sc_timeout, 1); return; case XS_SENSE: case XS_SHORTSENSE: #ifdef SCSIDEBUG scsi_sense_print_debug(xs); #endif error = sd_interpret_sense(xs); if (error == 0) { bp->b_error = 0; bp->b_resid = xs->resid; break; } if (error != ERESTART) { bp->b_error = error; xs->retries = 0; } goto retry; case XS_BUSY: if (xs->retries) { if (scsi_delay(xs, 1) != ERESTART) xs->retries = 0; } goto retry; case XS_TIMEOUT: retry: if (xs->retries--) { scsi_xs_exec(xs); return; } /* FALLTHROUGH */ default: if (bp->b_error == 0) bp->b_error = EIO; bp->b_flags |= B_ERROR; bp->b_resid = bp->b_bcount; break; } disk_unbusy(&sc->sc_dk, bp->b_bcount - xs->resid, bp->b_flags & B_READ); s = splbio(); biodone(bp); splx(s); scsi_xs_put(xs); } void sdminphys(struct buf *bp) { struct sd_softc *sc; long max; sc = sdlookup(DISKUNIT(bp->b_dev)); if (sc == NULL) return; /* XXX - right way to fail this? */ /* * If the device is ancient, we want to make sure that * the transfer fits into a 6-byte cdb. * * XXX Note that the SCSI-I spec says that 256-block transfers * are allowed in a 6-byte read/write, and are specified * by setting the "length" to 0. However, we're conservative * here, allowing only 255-block transfers in case an * ancient device gets confused by length == 0. A length of 0 * in a 10-byte read/write actually means 0 blocks. */ if (sc->flags & SDF_ANCIENT) { max = sc->sc_dk.dk_label->d_secsize * 0xff; if (bp->b_bcount > max) bp->b_bcount = max; } (*sc->sc_link->adapter->scsi_minphys)(bp, sc->sc_link); device_unref(&sc->sc_dev); } int sdread(dev_t dev, struct uio *uio, int ioflag) { return (physio(sdstrategy, dev, B_READ, sdminphys, uio)); } int sdwrite(dev_t dev, struct uio *uio, int ioflag) { return (physio(sdstrategy, dev, B_WRITE, sdminphys, uio)); } /* * Perform special action on behalf of the user * Knows about the internals of this device */ int sdioctl(dev_t dev, u_long cmd, caddr_t addr, int flag, struct proc *p) { struct sd_softc *sc; struct disklabel *lp; int error = 0; int part = DISKPART(dev); sc = sdlookup(DISKUNIT(dev)); if (sc == NULL) return (ENXIO); if (sc->flags & SDF_DYING) { device_unref(&sc->sc_dev); return (ENXIO); } SC_DEBUG(sc->sc_link, SDEV_DB2, ("sdioctl 0x%lx\n", cmd)); /* * If the device is not valid.. abandon ship */ if ((sc->sc_link->flags & SDEV_MEDIA_LOADED) == 0) { switch (cmd) { case DIOCLOCK: case DIOCEJECT: case SCIOCIDENTIFY: case SCIOCCOMMAND: case SCIOCDEBUG: if (part == RAW_PART) break; /* FALLTHROUGH */ default: if ((sc->sc_link->flags & SDEV_OPEN) == 0) { error = ENODEV; goto exit; } else { error = EIO; goto exit; } } } switch (cmd) { case DIOCRLDINFO: lp = malloc(sizeof(*lp), M_TEMP, M_WAITOK); sdgetdisklabel(dev, sc, lp, 0); bcopy(lp, sc->sc_dk.dk_label, sizeof(*lp)); free(lp, M_TEMP); goto exit; case DIOCGPDINFO: sdgetdisklabel(dev, sc, (struct disklabel *)addr, 1); goto exit; case DIOCGDINFO: *(struct disklabel *)addr = *(sc->sc_dk.dk_label); goto exit; case DIOCGPART: ((struct partinfo *)addr)->disklab = sc->sc_dk.dk_label; ((struct partinfo *)addr)->part = &sc->sc_dk.dk_label->d_partitions[DISKPART(dev)]; goto exit; case DIOCWDINFO: case DIOCSDINFO: if ((flag & FWRITE) == 0) { error = EBADF; goto exit; } if ((error = disk_lock(&sc->sc_dk)) != 0) goto exit; error = setdisklabel(sc->sc_dk.dk_label, (struct disklabel *)addr, sc->sc_dk.dk_openmask); if (error == 0) { if (cmd == DIOCWDINFO) error = writedisklabel(DISKLABELDEV(dev), sdstrategy, sc->sc_dk.dk_label); } disk_unlock(&sc->sc_dk); goto exit; case DIOCLOCK: error = scsi_prevent(sc->sc_link, (*(int *)addr) ? PR_PREVENT : PR_ALLOW, 0); goto exit; case MTIOCTOP: if (((struct mtop *)addr)->mt_op != MTOFFL) { error = EIO; goto exit; } /* FALLTHROUGH */ case DIOCEJECT: if ((sc->sc_link->flags & SDEV_REMOVABLE) == 0) { error = ENOTTY; goto exit; } sc->sc_link->flags |= SDEV_EJECTING; goto exit; case DIOCINQ: error = scsi_do_ioctl(sc->sc_link, cmd, addr, flag); if (error == ENOTTY) error = sd_ioctl_inquiry(sc, (struct dk_inquiry *)addr); goto exit; case DIOCSCACHE: if (!ISSET(flag, FWRITE)) { error = EBADF; goto exit; } /* FALLTHROUGH */ case DIOCGCACHE: error = sd_ioctl_cache(sc, cmd, (struct dk_cache *)addr); goto exit; default: if (part != RAW_PART) { error = ENOTTY; goto exit; } error = scsi_do_ioctl(sc->sc_link, cmd, addr, flag); } exit: device_unref(&sc->sc_dev); return (error); } int sd_ioctl_inquiry(struct sd_softc *sc, struct dk_inquiry *di) { struct scsi_vpd_serial *vpd; vpd = dma_alloc(sizeof(*vpd), PR_WAITOK | PR_ZERO); bzero(di, sizeof(struct dk_inquiry)); scsi_strvis(di->vendor, sc->sc_link->inqdata.vendor, sizeof(sc->sc_link->inqdata.vendor)); scsi_strvis(di->product, sc->sc_link->inqdata.product, sizeof(sc->sc_link->inqdata.product)); scsi_strvis(di->revision, sc->sc_link->inqdata.revision, sizeof(sc->sc_link->inqdata.revision)); /* the serial vpd page is optional */ if (scsi_inquire_vpd(sc->sc_link, vpd, sizeof(*vpd), SI_PG_SERIAL, 0) == 0) scsi_strvis(di->serial, vpd->serial, sizeof(vpd->serial)); else strlcpy(di->serial, "(unknown)", sizeof(vpd->serial)); dma_free(vpd, sizeof(*vpd)); return (0); } int sd_ioctl_cache(struct sd_softc *sc, long cmd, struct dk_cache *dkc) { union scsi_mode_sense_buf *buf; struct page_caching_mode *mode = NULL; u_int wrcache, rdcache; int big; int rv; if (ISSET(sc->sc_link->flags, SDEV_UMASS)) return (EOPNOTSUPP); /* see if the adapter has special handling */ rv = scsi_do_ioctl(sc->sc_link, cmd, (caddr_t)dkc, 0); if (rv != ENOTTY) return (rv); buf = dma_alloc(sizeof(*buf), PR_WAITOK); if (buf == NULL) return (ENOMEM); rv = scsi_do_mode_sense(sc->sc_link, PAGE_CACHING_MODE, buf, (void **)&mode, NULL, NULL, NULL, sizeof(*mode) - 4, scsi_autoconf | SCSI_SILENT, &big); if (rv != 0) goto done; if ((mode == NULL) || (!DISK_PGCODE(mode, PAGE_CACHING_MODE))) { rv = EIO; goto done; } wrcache = (ISSET(mode->flags, PG_CACHE_FL_WCE) ? 1 : 0); rdcache = (ISSET(mode->flags, PG_CACHE_FL_RCD) ? 0 : 1); switch (cmd) { case DIOCGCACHE: dkc->wrcache = wrcache; dkc->rdcache = rdcache; break; case DIOCSCACHE: if (dkc->wrcache == wrcache && dkc->rdcache == rdcache) break; if (dkc->wrcache) SET(mode->flags, PG_CACHE_FL_WCE); else CLR(mode->flags, PG_CACHE_FL_WCE); if (dkc->rdcache) CLR(mode->flags, PG_CACHE_FL_RCD); else SET(mode->flags, PG_CACHE_FL_RCD); if (big) { rv = scsi_mode_select_big(sc->sc_link, SMS_PF, &buf->hdr_big, scsi_autoconf | SCSI_SILENT, 20000); } else { rv = scsi_mode_select(sc->sc_link, SMS_PF, &buf->hdr, scsi_autoconf | SCSI_SILENT, 20000); } break; } done: dma_free(buf, sizeof(*buf)); return (rv); } /* * Load the label information on the named device */ int sdgetdisklabel(dev_t dev, struct sd_softc *sc, struct disklabel *lp, int spoofonly) { size_t len; char packname[sizeof(lp->d_packname) + 1]; char product[17], vendor[9]; bzero(lp, sizeof(struct disklabel)); lp->d_secsize = sc->params.secsize; lp->d_ntracks = sc->params.heads; lp->d_nsectors = sc->params.sectors; lp->d_ncylinders = sc->params.cyls; lp->d_secpercyl = lp->d_ntracks * lp->d_nsectors; if (lp->d_secpercyl == 0) { lp->d_secpercyl = 100; /* as long as it's not 0 - readdisklabel divides by it */ } lp->d_type = DTYPE_SCSI; if ((sc->sc_link->inqdata.device & SID_TYPE) == T_OPTICAL) strncpy(lp->d_typename, "SCSI optical", sizeof(lp->d_typename)); else strncpy(lp->d_typename, "SCSI disk", sizeof(lp->d_typename)); /* * Try to fit ' ' into d_packname. If that doesn't fit * then leave out ' ' and use only as much of '' as * does fit. */ viscpy(vendor, sc->sc_link->inqdata.vendor, 8); viscpy(product, sc->sc_link->inqdata.product, 16); len = snprintf(packname, sizeof(packname), "%s %s", vendor, product); if (len > sizeof(lp->d_packname)) { strlcpy(packname, product, sizeof(packname)); len = strlen(packname); } /* * It is safe to use len as the count of characters to copy because * packname is sizeof(lp->d_packname)+1, the string in packname is * always null terminated and len does not count the terminating null. * d_packname is not a null terminated string. */ bcopy(packname, lp->d_packname, len); DL_SETDSIZE(lp, sc->params.disksize); lp->d_version = 1; lp->d_flags = 0; /* XXX - these values for BBSIZE and SBSIZE assume ffs */ lp->d_bbsize = BBSIZE; lp->d_sbsize = SBSIZE; lp->d_magic = DISKMAGIC; lp->d_magic2 = DISKMAGIC; lp->d_checksum = dkcksum(lp); /* * Call the generic disklabel extraction routine */ return readdisklabel(DISKLABELDEV(dev), sdstrategy, lp, spoofonly); } void sd_shutdown(void *arg) { struct sd_softc *sc = (struct sd_softc *)arg; /* * If the disk cache needs to be flushed, and the disk supports * it, flush it. We're cold at this point, so we poll for * completion. */ if ((sc->flags & SDF_DIRTY) != 0) sd_flush(sc, SCSI_AUTOCONF); } /* * Check Errors */ int sd_interpret_sense(struct scsi_xfer *xs) { struct scsi_sense_data *sense = &xs->sense; struct scsi_link *sc_link = xs->sc_link; struct sd_softc *sc = sc_link->device_softc; u_int8_t serr = sense->error_code & SSD_ERRCODE; int retval; /* * Let the generic code handle everything except a few categories of * LUN not ready errors on open devices. */ if (((sc_link->flags & SDEV_OPEN) == 0) || (serr != SSD_ERRCODE_CURRENT && serr != SSD_ERRCODE_DEFERRED) || ((sense->flags & SSD_KEY) != SKEY_NOT_READY) || (sense->extra_len < 6)) return (scsi_interpret_sense(xs)); switch (ASC_ASCQ(sense)) { case SENSE_NOT_READY_BECOMING_READY: SC_DEBUG(sc_link, SDEV_DB1, ("becoming ready.\n")); retval = scsi_delay(xs, 5); break; case SENSE_NOT_READY_INIT_REQUIRED: SC_DEBUG(sc_link, SDEV_DB1, ("spinning up\n")); retval = scsi_start(sc->sc_link, SSS_START, SCSI_IGNORE_ILLEGAL_REQUEST | SCSI_NOSLEEP); if (retval == 0) retval = ERESTART; else if (retval == ENOMEM) /* Can't issue the command. Fall back on a delay. */ retval = scsi_delay(xs, 5); else SC_DEBUG(sc_link, SDEV_DB1, ("spin up failed (%#x)\n", retval)); break; default: retval = scsi_interpret_sense(xs); break; } return (retval); } daddr64_t sdsize(dev_t dev) { struct sd_softc *sc; int part, omask; int64_t size; sc = sdlookup(DISKUNIT(dev)); if (sc == NULL) return -1; if (sc->flags & SDF_DYING) { size = -1; goto exit; } part = DISKPART(dev); omask = sc->sc_dk.dk_openmask & (1 << part); if (omask == 0 && sdopen(dev, 0, S_IFBLK, NULL) != 0) { size = -1; goto exit; } if ((sc->sc_link->flags & SDEV_MEDIA_LOADED) == 0) size = -1; else if (sc->sc_dk.dk_label->d_partitions[part].p_fstype != FS_SWAP) size = -1; else size = DL_GETPSIZE(&sc->sc_dk.dk_label->d_partitions[part]) * (sc->sc_dk.dk_label->d_secsize / DEV_BSIZE); if (omask == 0 && sdclose(dev, 0, S_IFBLK, NULL) != 0) size = -1; exit: device_unref(&sc->sc_dev); return size; } /* #define SD_DUMP_NOT_TRUSTED if you just want to watch */ static int sddoingadump; /* * dump all of physical memory into the partition specified, starting * at offset 'dumplo' into the partition. */ int sddump(dev_t dev, daddr64_t blkno, caddr_t va, size_t size) { struct sd_softc *sc; /* disk unit to do the I/O */ struct disklabel *lp; /* disk's disklabel */ int unit, part; int sectorsize; /* size of a disk sector */ daddr64_t nsects; /* number of sectors in partition */ daddr64_t sectoff; /* sector offset of partition */ int totwrt; /* total number of sectors left to write */ int nwrt; /* current number of sectors to write */ struct scsi_xfer *xs; /* ... convenience */ int rv; /* Check if recursive dump; if so, punt. */ if (sddoingadump) return EFAULT; /* Mark as active early. */ sddoingadump = 1; unit = DISKUNIT(dev); /* Decompose unit & partition. */ part = DISKPART(dev); /* Check for acceptable drive number. */ if (unit >= sd_cd.cd_ndevs || (sc = sd_cd.cd_devs[unit]) == NULL) return ENXIO; /* * XXX Can't do this check, since the media might have been * XXX marked `invalid' by successful unmounting of all * XXX filesystems. */ #if 0 /* Make sure it was initialized. */ if ((sc->sc_link->flags & SDEV_MEDIA_LOADED) != SDEV_MEDIA_LOADED) return ENXIO; #endif /* Convert to disk sectors. Request must be a multiple of size. */ lp = sc->sc_dk.dk_label; sectorsize = lp->d_secsize; if ((size % sectorsize) != 0) return EFAULT; totwrt = size / sectorsize; blkno = dbtob(blkno) / sectorsize; /* blkno in DEV_BSIZE units */ nsects = DL_GETPSIZE(&lp->d_partitions[part]); sectoff = DL_GETPOFFSET(&lp->d_partitions[part]); /* Check transfer bounds against partition size. */ if ((blkno < 0) || ((blkno + totwrt) > nsects)) return EINVAL; /* Offset block number to start of partition. */ blkno += sectoff; while (totwrt > 0) { nwrt = totwrt; /* XXX */ #ifndef SD_DUMP_NOT_TRUSTED xs = scsi_xs_get(sc->sc_link, SCSI_NOSLEEP); if (xs == NULL) return (ENOMEM); xs->timeout = 10000; xs->flags |= SCSI_DATA_OUT; xs->data = va; xs->datalen = nwrt * sectorsize; sd_cmd_rw10(xs, 0, blkno, nwrt); /* XXX */ rv = scsi_xs_sync(xs); scsi_xs_put(xs); if (rv != 0) return (ENXIO); #else /* SD_DUMP_NOT_TRUSTED */ /* Let's just talk about this first... */ printf("sd%d: dump addr 0x%x, blk %d\n", unit, va, blkno); delay(500 * 1000); /* half a second */ #endif /* SD_DUMP_NOT_TRUSTED */ /* update block count */ totwrt -= nwrt; blkno += nwrt; va += sectorsize * nwrt; } sddoingadump = 0; return (0); } /* * Copy up to len chars from src to dst, ignoring non-printables. * Must be room for len+1 chars in dst so we can write the NUL. * Does not assume src is NUL-terminated. */ void viscpy(u_char *dst, u_char *src, int len) { while (len > 0 && *src != '\0') { if (*src < 0x20 || *src >= 0x80) { src++; continue; } *dst++ = *src++; len--; } *dst = '\0'; } int sd_read_cap_10(struct sd_softc *sc, int flags) { struct scsi_read_capacity cdb; struct scsi_read_cap_data *rdcap; struct scsi_xfer *xs; int rv = ENOMEM; CLR(flags, SCSI_IGNORE_ILLEGAL_REQUEST); rdcap = dma_alloc(sizeof(*rdcap), (ISSET(flags, SCSI_NOSLEEP) ? PR_NOWAIT : PR_WAITOK) | PR_ZERO); if (rdcap == NULL) return (ENOMEM); xs = scsi_xs_get(sc->sc_link, flags | SCSI_DATA_IN | SCSI_SILENT); if (xs == NULL) goto done; bzero(&cdb, sizeof(cdb)); cdb.opcode = READ_CAPACITY; memcpy(xs->cmd, &cdb, sizeof(cdb)); xs->cmdlen = sizeof(cdb); xs->data = (void *)rdcap; xs->datalen = sizeof(*rdcap); xs->timeout = 20000; rv = scsi_xs_sync(xs); scsi_xs_put(xs); if (rv == 0) { sc->params.disksize = _4btol(rdcap->addr) + 1ll; sc->params.secsize = _4btol(rdcap->length); CLR(sc->flags, SDF_THIN); } done: dma_free(rdcap, sizeof(*rdcap)); return (rv); } int sd_read_cap_16(struct sd_softc *sc, int flags) { struct scsi_read_capacity_16 cdb; struct scsi_read_cap_data_16 *rdcap; struct scsi_xfer *xs; int rv = ENOMEM; CLR(flags, SCSI_IGNORE_ILLEGAL_REQUEST); rdcap = dma_alloc(sizeof(*rdcap), (ISSET(flags, SCSI_NOSLEEP) ? PR_NOWAIT : PR_WAITOK) | PR_ZERO); if (rdcap == NULL) return (ENOMEM); xs = scsi_xs_get(sc->sc_link, flags | SCSI_DATA_IN | SCSI_SILENT); if (xs == NULL) goto done; bzero(&cdb, sizeof(cdb)); cdb.opcode = READ_CAPACITY_16; cdb.byte2 = SRC16_SERVICE_ACTION; _lto4b(sizeof(*rdcap), cdb.length); memcpy(xs->cmd, &cdb, sizeof(cdb)); xs->cmdlen = sizeof(cdb); xs->data = (void *)rdcap; xs->datalen = sizeof(*rdcap); xs->timeout = 20000; rv = scsi_xs_sync(xs); scsi_xs_put(xs); if (rv == 0) { sc->params.disksize = _8btol(rdcap->addr) + 1; sc->params.secsize = _4btol(rdcap->length); if (ISSET(_2btol(rdcap->lowest_aligned), READ_CAP_16_TPE)) SET(sc->flags, SDF_THIN); else CLR(sc->flags, SDF_THIN); } done: dma_free(rdcap, sizeof(*rdcap)); return (rv); } int sd_size(struct sd_softc *sc, int flags) { int rv; if (SCSISPC(sc->sc_link->inqdata.version) >= 3) { rv = sd_read_cap_16(sc, flags); if (rv != 0) rv = sd_read_cap_10(sc, flags); } else { rv = sd_read_cap_10(sc, flags); if (rv == 0 && sc->params.disksize == 0x100000000ll) rv = sd_read_cap_16(sc, flags); } return (rv); } int sd_thin_pages(struct sd_softc *sc, int flags) { struct scsi_vpd_hdr *pg; size_t len = 0; u_int8_t *pages; int i, score = 0; int rv; pg = dma_alloc(sizeof(*pg), (ISSET(flags, SCSI_NOSLEEP) ? PR_NOWAIT : PR_WAITOK) | PR_ZERO); if (pg == NULL) return (ENOMEM); rv = scsi_inquire_vpd(sc->sc_link, pg, sizeof(*pg), SI_PG_SUPPORTED, flags); if (rv != 0) goto done; len = _2btol(pg->page_length); dma_free(pg, sizeof(*pg)); pg = dma_alloc(sizeof(*pg) + len, (ISSET(flags, SCSI_NOSLEEP) ? PR_NOWAIT : PR_WAITOK) | PR_ZERO); if (pg == NULL) return (ENOMEM); rv = scsi_inquire_vpd(sc->sc_link, pg, sizeof(*pg) + len, SI_PG_SUPPORTED, flags); if (rv != 0) goto done; pages = (u_int8_t *)(pg + 1); if (pages[0] != SI_PG_SUPPORTED) { rv = EIO; goto done; } for (i = 1; i < len; i++) { switch (pages[i]) { case SI_PG_DISK_LIMITS: case SI_PG_DISK_THIN: score++; break; } } if (score < 2) rv = EOPNOTSUPP; done: dma_free(pg, sizeof(*pg) + len); return (rv); } int sd_vpd_block_limits(struct sd_softc *sc, int flags) { struct scsi_vpd_disk_limits *pg; int rv; pg = dma_alloc(sizeof(*pg), (ISSET(flags, SCSI_NOSLEEP) ? PR_NOWAIT : PR_WAITOK) | PR_ZERO); if (pg == NULL) return (ENOMEM); rv = scsi_inquire_vpd(sc->sc_link, pg, sizeof(*pg), SI_PG_DISK_LIMITS, flags); if (rv != 0) goto done; if (_2btol(pg->hdr.page_length) == SI_PG_DISK_LIMITS_LEN_THIN) { sc->params.unmap_sectors = _4btol(pg->max_unmap_lba_count); sc->params.unmap_descs = _4btol(pg->max_unmap_desc_count); } else rv = EOPNOTSUPP; done: dma_free(pg, sizeof(*pg)); return (rv); } int sd_vpd_thin(struct sd_softc *sc, int flags) { struct scsi_vpd_disk_thin *pg; int rv; pg = dma_alloc(sizeof(*pg), (ISSET(flags, SCSI_NOSLEEP) ? PR_NOWAIT : PR_WAITOK) | PR_ZERO); if (pg == NULL) return (ENOMEM); rv = scsi_inquire_vpd(sc->sc_link, pg, sizeof(*pg), SI_PG_DISK_THIN, flags); if (rv != 0) goto done; #ifdef notyet if (ISSET(pg->flags, VPD_DISK_THIN_TPU)) sc->sc_delete = sd_unmap; else if (ISSET(pg->flags, VPD_DISK_THIN_TPWS)) { sc->sc_delete = sd_write_same_16; sc->params.unmap_descs = 1; /* WRITE SAME 16 only does one */ } else rv = EOPNOTSUPP; #endif done: dma_free(pg, sizeof(*pg)); return (rv); } int sd_thin_params(struct sd_softc *sc, int flags) { int rv; rv = sd_thin_pages(sc, flags); if (rv != 0) return (rv); rv = sd_vpd_block_limits(sc, flags); if (rv != 0) return (rv); rv = sd_vpd_thin(sc, flags); if (rv != 0) return (rv); return (0); } /* * Fill out the disk parameter structure. Return SDGP_RESULT_OK if the * structure is correctly filled in, SDGP_RESULT_OFFLINE otherwise. The caller * is responsible for clearing the SDEV_MEDIA_LOADED flag if the structure * cannot be completed. */ int sd_get_parms(struct sd_softc *sc, struct disk_parms *dp, int flags) { union scsi_mode_sense_buf *buf = NULL; struct page_rigid_geometry *rigid = NULL; struct page_flex_geometry *flex = NULL; struct page_reduced_geometry *reduced = NULL; u_char *page0 = NULL; u_int32_t heads = 0, sectors = 0, cyls = 0, secsize = 0; int err = 0, big; if (sd_size(sc, flags) != 0) return (SDGP_RESULT_OFFLINE); if (ISSET(sc->flags, SDF_THIN) && sd_thin_params(sc, flags) != 0) { /* we dont know the unmap limits, so we cant use thin shizz */ CLR(sc->flags, SDF_THIN); } buf = dma_alloc(sizeof(*buf), PR_NOWAIT); if (buf == NULL) goto validate; /* * Ask for page 0 (vendor specific) mode sense data to find * READONLY info. The only thing USB devices will ask for. */ err = scsi_do_mode_sense(sc->sc_link, 0, buf, (void **)&page0, NULL, NULL, NULL, 1, flags | SCSI_SILENT, &big); if (err == 0) { if (big && buf->hdr_big.dev_spec & SMH_DSP_WRITE_PROT) SET(sc->sc_link->flags, SDEV_READONLY); else if (!big && buf->hdr.dev_spec & SMH_DSP_WRITE_PROT) SET(sc->sc_link->flags, SDEV_READONLY); else CLR(sc->sc_link->flags, SDEV_READONLY); } /* * Many UMASS devices choke when asked about their geometry. Most * don't have a meaningful geometry anyway, so just fake it if * scsi_size() worked. */ if ((sc->sc_link->flags & SDEV_UMASS) && (dp->disksize > 0)) goto validate; switch (sc->sc_link->inqdata.device & SID_TYPE) { case T_OPTICAL: /* No more information needed or available. */ break; case T_RDIRECT: /* T_RDIRECT supports only PAGE_REDUCED_GEOMETRY (6). */ err = scsi_do_mode_sense(sc->sc_link, PAGE_REDUCED_GEOMETRY, buf, (void **)&reduced, NULL, NULL, &secsize, sizeof(*reduced), flags | SCSI_SILENT, NULL); if (!err && reduced && DISK_PGCODE(reduced, PAGE_REDUCED_GEOMETRY)) { if (dp->disksize == 0) dp->disksize = _5btol(reduced->sectors); if (secsize == 0) secsize = _2btol(reduced->bytes_s); } break; default: /* * NOTE: Some devices leave off the last four bytes of * PAGE_RIGID_GEOMETRY and PAGE_FLEX_GEOMETRY mode sense pages. * The only information in those four bytes is RPM information * so accept the page. The extra bytes will be zero and RPM will * end up with the default value of 3600. */ if (((sc->sc_link->flags & SDEV_ATAPI) == 0) || ((sc->sc_link->flags & SDEV_REMOVABLE) == 0)) err = scsi_do_mode_sense(sc->sc_link, PAGE_RIGID_GEOMETRY, buf, (void **)&rigid, NULL, NULL, &secsize, sizeof(*rigid) - 4, flags | SCSI_SILENT, NULL); if (!err && rigid && DISK_PGCODE(rigid, PAGE_RIGID_GEOMETRY)) { heads = rigid->nheads; cyls = _3btol(rigid->ncyl); if (heads * cyls > 0) sectors = dp->disksize / (heads * cyls); } else { err = scsi_do_mode_sense(sc->sc_link, PAGE_FLEX_GEOMETRY, buf, (void **)&flex, NULL, NULL, &secsize, sizeof(*flex) - 4, flags | SCSI_SILENT, NULL); if (!err && flex && DISK_PGCODE(flex, PAGE_FLEX_GEOMETRY)) { sectors = flex->ph_sec_tr; heads = flex->nheads; cyls = _2btol(flex->ncyl); if (secsize == 0) secsize = _2btol(flex->bytes_s); if (dp->disksize == 0) dp->disksize = heads * cyls * sectors; } } break; } validate: if (buf) dma_free(buf, sizeof(*buf)); if (dp->disksize == 0) return (SDGP_RESULT_OFFLINE); if (dp->secsize == 0) dp->secsize = (secsize == 0) ? 512 : secsize; /* * Restrict secsize values to powers of two between 512 and 64k. */ switch (dp->secsize) { case 0x200: /* == 512, == DEV_BSIZE on all architectures. */ case 0x400: case 0x800: case 0x1000: case 0x2000: case 0x4000: case 0x8000: case 0x10000: break; default: SC_DEBUG(sc->sc_link, SDEV_DB1, ("sd_get_parms: bad secsize: %#x\n", dp->secsize)); return (SDGP_RESULT_OFFLINE); } /* * XXX THINK ABOUT THIS!! Using values such that sectors * heads * * cyls is <= disk_size can lead to wasted space. We need a more * careful calculation/validation to make everything work out * optimally. */ if (dp->disksize > 0xffffffff && (dp->heads * dp->sectors) < 0xffff) { dp->heads = 511; dp->sectors = 255; cyls = 0; } else { /* * Use standard geometry values for anything we still don't * know. */ dp->heads = (heads == 0) ? 255 : heads; dp->sectors = (sectors == 0) ? 63 : sectors; } dp->cyls = (cyls == 0) ? dp->disksize / (dp->heads * dp->sectors) : cyls; if (dp->cyls == 0) { dp->heads = dp->cyls = 1; dp->sectors = dp->disksize; } return (SDGP_RESULT_OK); } void sd_flush(struct sd_softc *sc, int flags) { struct scsi_link *link = sc->sc_link; struct scsi_xfer *xs; struct scsi_synchronize_cache *cmd; if (link->quirks & SDEV_NOSYNCCACHE) return; /* * Issue a SYNCHRONIZE CACHE. Address 0, length 0 means "all remaining * blocks starting at address 0". Ignore ILLEGAL REQUEST in the event * that the command is not supported by the device. */ xs = scsi_xs_get(link, flags); if (xs == NULL) { SC_DEBUG(link, SDEV_DB1, ("cache sync failed to get xs\n")); return; } cmd = (struct scsi_synchronize_cache *)xs->cmd; cmd->opcode = SYNCHRONIZE_CACHE; xs->cmdlen = sizeof(*cmd); xs->timeout = 100000; xs->flags |= SCSI_IGNORE_ILLEGAL_REQUEST; if (scsi_xs_sync(xs) == 0) sc->flags &= ~SDF_DIRTY; else SC_DEBUG(link, SDEV_DB1, ("cache sync failed\n")); scsi_xs_put(xs); }