.\" $OpenBSD: aucat.1,v 1.86 2011/06/29 07:39:02 ratchov Exp $ .\" .\" Copyright (c) 2006 Alexandre Ratchov .\" .\" Permission to use, copy, modify, and distribute this software for any .\" purpose with or without fee is hereby granted, provided that the above .\" copyright notice and this permission notice appear in all copies. .\" .\" THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES .\" WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF .\" MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR .\" ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES .\" WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN .\" ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF .\" OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. .\" .Dd $Mdocdate: June 29 2011 $ .Dt AUCAT 1 .Os .Sh NAME .Nm aucat .Nd audio server and stream manipulation tool .Sh SYNOPSIS .Nm aucat .Bk -words .Op Fl dln .Op Fl a Ar flag .Op Fl b Ar nframes .Op Fl C Ar min : Ns Ar max .Op Fl c Ar min : Ns Ar max .Op Fl e Ar enc .Op Fl f Ar device .Op Fl h Ar fmt .Op Fl i Ar file .Op Fl j Ar flag .Op Fl L Ar addr .Op Fl m Ar mode .Op Fl o Ar file .Op Fl q Ar device .Op Fl r Ar rate .Op Fl s Ar name .Op Fl t Ar mode .Op Fl U Ar unit .Op Fl u Ar flag .Op Fl v Ar volume .Op Fl w Ar flag .Op Fl x Ar policy .Op Fl z Ar nframes .Ek .Sh DESCRIPTION .Nm is an audio utility which can simultaneously play and record any number of audio .Em streams on any number of audio devices, possibly controlled through MIDI. It can also act as an audio server, in which case streams correspond to client connections rather than plain files. .Pp Audio devices are independent. A list of streams is attached to each audio device, as well as an optional list of MIDI ports to control the device. A typical invocation of .Nm consists in providing streams to play and record, and possibly the audio device to use, if the default is not desired. .Pp This also applies to server mode, except that streams are created dynamically when clients connect to the server. Thus, instead of actual streams (paths to plain files), templates for client streams (sub-device names) must be provided. .Pp The options are as follows: .Bl -tag -width Ds .It Fl a Ar flag Control whether .Nm opens the audio device only when needed or keeps it open all the time. This applies to MIDI ports controlling the device as well. If the flag is .Va on then the device is kept open all the time, ensuring no other program can steal it. If the flag is .Va off , then it's automatically closed, allowing other programs to have direct access to the device, or the device to be disconnected. The default is .Va on . .It Fl b Ar nframes The buffer size of the audio device in frames. A frame consists of one sample for each channel in the stream. This is the number of frames that will be buffered before being played and thus controls the playback latency. .It Xo .Fl C Ar min : Ns Ar max , .Fl c Ar min : Ns Ar max .Xc The range of stream channel numbers for recording and playback directions, respectively. The default is 0:1, i.e. stereo. .It Fl d Increase log verbosity. .Nm logs on .Em stderr until it daemonizes. .It Fl e Ar enc Encoding of the playback or recording stream (see below). The default is signed, 16-bit, native byte order. .It Fl f Ar device Add this .Xr sndio 7 audio device to devices used for playing and/or recording. Preceding streams .Pq Fl ios , control MIDI ports .Pq Fl q , and per-device options .Pq Fl abuwz apply to this device. Device mode and parameters are determined from streams attached to it. .It Fl h Ar fmt File format of the playback or record stream (see below). The default is auto. .It Fl i Ar file Add this file to the list of streams to play. If the option argument is .Sq - then standard input will be used. .It Fl j Ar flag Control whether stream channels are joined or expanded if the stream number of channels is not equal to the device number of channels. If the flag is .Va off then stream channels are routed to the corresponding device channel, possibly discarding channels not present in the device. If the flag is .Va on , then a single stream channel may be sent on multiple device channels, or multiple stream channels may be sent to a single device channel. For instance, this feature could be used to request mono streams to be sent on multiple outputs or to record a stereo input into a mono stream. The default is .Ar on . .It Fl L Ar addr Specify a local network address to listen on in server mode. .Nm will listen on TCP port 11025+n, where n is the unit number specified with .Fl U . Without this option, .Nm listens on the .Ux Ns -domain socket only, and is not reachable from any network. If the option argument is .Sq - then .Nm will accept connections from any address. .It Fl l Detach and become a daemon. .It Fl m Ar mode Set the stream mode. Valid modes are .Ar play , .Ar rec , and .Ar mon , corresponding to playback, recording and monitoring. A monitoring stream is a fake recording stream corresponding to the mix of all playback streams. Multiple modes can be specified, separated by commas, but the same stream cannot be used for both recording and monitoring. The default is .Ar play , Ns Ar rec (i.e. full-duplex). .It Fl n Loopback mode. Instead of using audio devices, send input streams to the output, processing them on the fly. This mode is useful to mix, demultiplex, resample or reencode audio files offline. .It Fl o Ar file Add this file to the list of recording streams. If the option argument is .Sq - then standard output will be used. .It Fl q Ar device Expose the audio device clock on this .Xr sndio 7 MIDI port and allow audio device properties to be controlled through MIDI. This includes per-stream volumes and the ability to synchronously start, stop and relocate streams created in MIDI Machine Control (MMC) slave mode .Pq Fl t . .It Fl r Ar rate Sample rate in Hertz of the stream. The default is 44100Hz. .It Fl s Ar name Add .Ar name to the list of sub-devices to expose in server mode. This allows clients to use .Nm instead of the physical audio device for audio input and output in order to share the physical device with other clients. Defining multiple sub-devices allows splitting a physical audio device into logical devices having different properties (e.g. channel ranges). The given .Ar name corresponds to the .Dq option part of the .Xr sndio 7 device name string. .It Fl t Ar mode Select the way streams are controlled by MIDI Machine Control (MMC) messages. If the mode is .Va off (the default), then streams are not affected by MMC messages. If the mode is .Va slave , then streams are started synchronously by MMC start messages; additionally, the server clock is exposed as MIDI Time Code (MTC) messages allowing MTC-capable software or hardware to be synchronized to audio streams. .It Fl U Ar unit Unit number to use when running in server mode. Each .Nm server instance has an unique unit number, used in .Xr sndio 7 device names. The default is 0. .It Fl u Ar flag Control how parameters of the audio device are chosen. If the flag is .Va on then .Nm tries to automatically determine the optimal parameters to match stream parameters and avoid conversions if possible. If the flag is .Va off it will instead use the parameters specified by the .Fl Ccer options. The default is .Va on . .It Fl v Ar volume Software volume attenuation of the playback stream. The value must be between 1 and 127, corresponding to \-42dB and \-0dB attenuation in 1/3dB steps. In server mode, clients inherit this parameter. Reducing the volume in advance allows a client's volume to stay independent from the number of clients as long as their number is small enough. 18 volume units (i.e. \-6dB attenuation) allows the number of playback streams to be doubled. The default is 127 i.e. no attenuation. .It Fl w Ar flag Control .Nm behaviour when the maximum volume of the hardware is reached and a new stream is connected. This happens only when stream volumes are not properly set using the .Fl v option. If the flag is .Va on , then the master volume (corresponding to the mix of all playback streams) is automatically adjusted to avoid clipping. Using .Va off makes sense when all streams are recorded or produced with properly lowered volumes. The default is .Va on . .It Fl x Ar policy Action when the output stream cannot accept recorded data fast enough or the input stream cannot provide data to play fast enough. If the policy is .Dq ignore (the default) then samples that cannot be written are discarded and samples that cannot be read are replaced by silence. If the policy is .Dq sync then recorded samples are discarded, but the same amount of silence will be written once the stream is unblocked, in order to reach the right position in time. Similarly silence is played, but the same amount of samples will be discarded once the stream is unblocked. If the policy is .Dq error then the stream is closed permanently. .Pp If a stream is created with the .Fl t option, the .Dq ignore action is disabled for any stream connected to it to ensure proper synchronization. .It Fl z Ar nframes The audio device block size in frames. This is the number of frames between audio clock ticks, i.e. the clock resolution. If a stream is created with the .Fl t option, and MTC is used for synchronization, the clock resolution must be 96, 100 or 120 ticks per second for maximum accuracy. For instance, 120 ticks per second at 48000Hz corresponds to a 400 frame block size. .El .Pp On the command line, per-device parameters .Pq Fl abuwz must precede the device definition .Pq Fl f , and per-stream parameters .Pq Fl Ccehjmrtvx must precede the stream definition .Pq Fl ios . MIDI ports .Pq Fl q and stream definitions .Pq Fl ios must precede the definition of the device .Pq Fl f to which they are attached. Global parameters .Pq Fl dlnUu are position-independent. .Pp If no audio devices .Pq Fl f are specified, settings are applied as if the default device is specified as the last argument. If no streams .Pq Fl ios are specified for a device, a default server sub-device is created attached to it, meaning that .Nm behaves as an audio server. The default .Xr sndio 7 device is .Pa aucat:0 .Pq also known as Pa aucat:0.default .Pp If .Nm is sent .Dv SIGHUP , .Dv SIGINT or .Dv SIGTERM , it terminates recording to files. .Pp File formats are specified using the .Fl h option. The following file formats are supported: .Bl -tag -width s32lexxx -offset indent .It raw Headerless file. This format is recommended since it has no limitations. .It wav Microsoft WAVE file format. There are limitations inherent to the file format itself: not all encodings are supported, file sizes are limited to 2GB, and the file must support the .Xr lseek 2 operation (e.g. pipes do not support it). .It auto Try to guess, depending on the file name. .El .Pp Encodings are specified using the .Fl e option. The following encodings are supported: .Pp .Bl -tag -width s32lexxx -offset indent -compact .It s8 signed 8-bit .It u8 unsigned 8-bit .It s16le signed 16-bit, little endian .It u16le unsigned 16-bit, little endian .It s16be signed 16-bit, big endian .It u16be unsigned 16-bit, big endian .It s24le signed 24-bit, stored in 4 bytes, little endian .It u24le unsigned 24-bit, stored in 4 bytes, little endian .It s24be signed 24-bit, stored in 4 bytes, big endian .It u24be unsigned 24-bit, stored in 4 bytes, big endian .It s32le signed 32-bit, little endian .It u32le unsigned 32-bit, little endian .It s32be signed 32-bit, big endian .It u32be unsigned 32-bit, big endian .It s24le3 signed 24-bit, packed in 3 bytes, little endian .It u24le3 unsigned 24-bit, packed in 3 bytes, big endian .It s24be3 signed 24-bit, packed in 3 bytes, little endian .It u24be3 unsigned 24-bit, packed in 3 bytes, big endian .It s20le3 signed 20-bit, packed in 3 bytes, little endian .It u20le3 unsigned 20-bit, packed in 3 bytes, big endian .It s20be3 signed 20-bit, packed in 3 bytes, little endian .It u20be3 unsigned 20-bit, packed in 3 bytes, big endian .It s18le3 signed 18-bit, packed in 3 bytes, little endian .It u18le3 unsigned 18-bit, packed in 3 bytes, big endian .It s18be3 signed 18-bit, packed in 3 bytes, little endian .It u18be3 unsigned 18-bit, packed in 3 bytes, big endian .El .Sh SERVER MODE If at least one sub-device .Pq Fl s is exposed by .Nm , including the case when no stream options are given, then .Nm can be used as a server to overcome hardware limitations and allow applications to run on fixed sample rate devices or on devices supporting only unusual encodings. .Pp Certain applications, such as synthesis software, require a low latency audio setup. To reduce the probability of buffer underruns or overruns, especially on busy machines, the server can be started by the super-user, in which case it will run with higher priority. Any user will still be able to connect to it, but for privacy reasons only one user may have connections to it at a given time. .Sh MIDI CONTROL .Nm can expose the audio device clock on registered MIDI ports .Pq Fl q and allows audio device properties to be controlled through MIDI. If running in server mode .Nm creates a MIDI port with the same name as the default audio device to which MIDI programs can connect. .Pp A MIDI channel is assigned to each stream, and the volume is changed using the standard volume controller (number 7). Similarly, when the audio client changes its volume, the same MIDI controller message is sent out; it can be used for instance for monitoring or as feedback for motorized faders. .Pp Streams created with the .Fl t option are controlled by the following MMC messages: .Bl -tag -width relocateXXX -offset indent .It relocate Streams are relocated to the requested time position relative to the beginning of the stream, at which playback and recording must start. If the requested position is beyond the end of file, the stream is temporarly disabled until a valid position is requested. This message is ignored by client streams (server mode). The given time position is sent to MIDI ports as an MTC .Dq "full frame" message forcing all MTC-slaves to relocate to the given position (see below). .It start Put all streams in starting mode. In this mode, .Nm waits for all streams to become ready to start, and then starts them synchronously. Once started, new streams can be created (server mode) but they will be blocked until the next stop-to-start transition. .It stop Put all streams in stopped mode (the default). In this mode, any stream attempting to start playback or recording is paused. Files are stopped and rewound back to the starting position, while client streams (server mode) that are already started are not affected until they stop and try to start again. .El .Pp Streams created with the .Fl t option export the server clock using MTC, allowing non-audio software or hardware to be synchronized to the audio stream. Maximum accuracy is achieved when the number of blocks per second is equal to one of the standard MTC clock rates (96, 100 and 120Hz). The following sample rates .Pq Fl r and block sizes .Pq Fl z are recommended: .Pp .Bl -bullet -offset indent -compact .It 44100Hz, 441 frames (MTC rate is 100Hz) .It 48000Hz, 400 frames (MTC rate is 120Hz) .It 48000Hz, 480 frames (MTC rate is 100Hz) .It 48000Hz, 500 frames (MTC rate is 96Hz) .El .Pp For instance, the following command will create two devices: the default .Va aucat:0 and a MIDI-controlled .Va aucat:0.mmc : .Bd -literal -offset indent $ aucat -l -r 48000 -z 400 -s default -t slave -s mmc .Ed .Pp Streams connected to .Va aucat:0 behave normally, while streams connected to .Va aucat:0.mmc wait for the MMC start signal and start synchronously. Regardless of which device a stream is connected to, its playback volume knob is exposed. .Pp For instance, the following command will play a file on the .Va aucat:0.mmc audio device, and give full control to MIDI software or hardware connected to the .Va midithru:0 MIDI device: .Bd -literal -offset indent $ aucat -t slave -q midithru:0 -i file.wav -f aucat:0.mmc .Ed .Pp At this stage, .Nm will start, stop and relocate automatically following all user actions in the MIDI sequencer. Note that the sequencer must use .Va aucat:0 as the MTC source, i.e. the audio server, not the audio player. .Sh ENVIRONMENT .Bl -tag -width "AUCAT_COOKIE" -compact .It Ev AUCAT_COOKIE File containing user's session cookie. .It Ev AUDIODEVICE .Xr sndio 7 audio device to use if the .Fl f option is not specified. .El .Sh EXAMPLES Mix and play two stereo streams, the first at 48kHz and the second at 44.1kHz: .Bd -literal -offset indent $ aucat -r 48000 -i file1.raw -r 44100 -i file2.raw .Ed .Pp Record channels 2 and 3 into one stereo file and channels 6 and 7 into another stereo file using a 96kHz sampling rate for both: .Bd -literal -offset indent $ aucat -j off -r 96000 -C 2:3 -o file1.raw -C 6:7 -o file2.raw .Ed .Pp Split a stereo file into two mono files: .Bd -literal -offset indent $ aucat -n -j off -i stereo.wav -C 0:0 -o left.wav -C 1:1 -o right.wav .Ed .Pp Start .Nm in server mode using default parameters, creating an additional sub-device for output to channels 2:3 only (rear speakers on most cards), exposing the .Pa aucat:0 and .Pa aucat:0.rear devices: .Bd -literal -offset indent $ aucat -l -s default -c 2:3 -s rear .Ed .Pp Start .Nm in server mode, creating the default sub-device with low volume and an additional sub-device for high volume output, exposing the .Pa aucat:0 and .Pa aucat:0.max devices: .Bd -literal -offset indent $ aucat -l -v 65 -s default -v 127 -s max .Ed .Pp Start .Nm in server mode, configuring the audio device to use a 48kHz sample frequency, 240-frame block size, and 2-block buffers. The corresponding latency is 10ms, which is the time it takes the sound to propagate 3.5 meters. .Bd -literal -offset indent $ aucat -l -r 48000 -b 480 -z 240 .Ed .Sh SEE ALSO .Xr audioctl 1 , .Xr cdio 1 , .Xr mixerctl 1 , .Xr audio 4 , .Xr sndio 7 .Sh BUGS The .Nm utility assumes non-blocking I/O for input and output streams. It will not work reliably on files that may block (ordinary files block, pipes don't). To avoid audio underruns/overruns or MIDI jitter caused by file I/O, it's recommended to use two .Nm processes: a server handling audio and MIDI I/O and a client handling disk I/O. .Pp Resampling is low quality; down-sampling especially should be avoided when recording. .Pp Processing is done using 16-bit arithmetic, thus samples with more than 16 bits are rounded. 16 bits (i.e. 97dB dynamic) are largely enough for most applications though. .Pp If .Fl a Ar off is used in server mode, .Nm creates sub-devices to expose first and then opens the audio hardware on demand. Technically, this allows .Nm to attempt to use one of the sub-devices it exposes as an audio device, creating a deadlock. To avoid this, .Fl a Ar off is disabled for the default audio device, but nothing prevents the user from shooting himself in the foot by creating a similar deadlock.