/* $OpenPackages$ */ /* $OpenBSD: parse.c,v 1.67 2002/06/11 21:12:11 espie Exp $ */ /* $NetBSD: parse.c,v 1.29 1997/03/10 21:20:04 christos Exp $ */ /* * Copyright (c) 1999 Marc Espie. * * Extensive code changes for the OpenBSD project. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE OPENBSD PROJECT AND CONTRIBUTORS * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OPENBSD * PROJECT OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ /* * Copyright (c) 1988, 1989, 1990, 1993 * The Regents of the University of California. All rights reserved. * Copyright (c) 1989 by Berkeley Softworks * All rights reserved. * * This code is derived from software contributed to Berkeley by * Adam de Boor. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #include #include #include #include #include #include "config.h" #include "defines.h" #include "dir.h" #include "job.h" #include "buf.h" #include "for.h" #include "lowparse.h" #include "arch.h" #include "cond.h" #include "suff.h" #include "parse.h" #include "var.h" #include "targ.h" #include "error.h" #include "str.h" #include "main.h" #include "gnode.h" #include "memory.h" #include "extern.h" #include "lst.h" #include "parsevar.h" #include "stats.h" #include "garray.h" static struct growableArray gsources, gtargets; #define SOURCES_SIZE 128 #define TARGETS_SIZE 32 static LIST theParseIncPath;/* list of directories for "..." includes */ static LIST theSysIncPath; /* list of directories for <...> includes */ Lst sysIncPath = &theSysIncPath; Lst parseIncPath = &theParseIncPath; #ifdef CLEANUP static LIST targCmds; /* command lines for targets */ #endif static GNode *mainNode; /* The main target to create. This is the * first target on the first dependency * line in the first makefile */ /*- * specType contains the SPECial TYPE of the current target. It is * Not if the target is unspecial. If it *is* special, however, the children * are linked as children of the parent but not vice versa. This variable is * set in ParseDoDependency */ typedef enum { Begin, /* .BEGIN */ Default, /* .DEFAULT */ End, /* .END */ Ignore, /* .IGNORE */ Includes, /* .INCLUDES */ Interrupt, /* .INTERRUPT */ Libs, /* .LIBS */ MFlags, /* .MFLAGS or .MAKEFLAGS */ Main, /* .MAIN and we don't have anything user-specified to * make */ NoExport, /* .NOEXPORT */ NoPath, /* .NOPATH */ Not, /* Not special */ NotParallel, /* .NOTPARALELL */ Null, /* .NULL */ Order, /* .ORDER */ Parallel, /* .PARALLEL */ ExPath, /* .PATH */ Phony, /* .PHONY */ Precious, /* .PRECIOUS */ ExShell, /* .SHELL */ Silent, /* .SILENT */ SingleShell, /* .SINGLESHELL */ Suffixes, /* .SUFFIXES */ Wait, /* .WAIT */ Attribute /* Generic attribute */ } ParseSpecial; static ParseSpecial specType; static int waiting; /* * Predecessor node for handling .ORDER. Initialized to NULL when .ORDER * seen, then set to each successive source on the line. */ static GNode *predecessor; /* * The parseKeywords table is searched using binary search when deciding * if a target or source is special. The 'spec' field is the ParseSpecial * type of the keyword ("Not" if the keyword isn't special as a target) while * the 'op' field is the operator to apply to the list of targets if the * keyword is used as a source ("0" if the keyword isn't special as a source) */ static struct { char *name; /* Name of keyword */ ParseSpecial spec; /* Type when used as a target */ int op; /* Operator when used as a source */ } parseKeywords[] = { { ".BEGIN", Begin, 0 }, { ".DEFAULT", Default, 0 }, { ".END", End, 0 }, { ".EXEC", Attribute, OP_EXEC }, { ".IGNORE", Ignore, OP_IGNORE }, { ".INCLUDES", Includes, 0 }, { ".INTERRUPT", Interrupt, 0 }, { ".INVISIBLE", Attribute, OP_INVISIBLE }, { ".JOIN", Attribute, OP_JOIN }, { ".LIBS", Libs, 0 }, { ".MADE", Attribute, OP_MADE }, { ".MAIN", Main, 0 }, { ".MAKE", Attribute, OP_MAKE }, { ".MAKEFLAGS", MFlags, 0 }, { ".MFLAGS", MFlags, 0 }, #if 0 /* basic scaffolding for NOPATH, not working yet */ { ".NOPATH", NoPath, OP_NOPATH }, #endif { ".NOTMAIN", Attribute, OP_NOTMAIN }, { ".NOTPARALLEL", NotParallel, 0 }, { ".NO_PARALLEL", NotParallel, 0 }, { ".NULL", Null, 0 }, { ".OPTIONAL", Attribute, OP_OPTIONAL }, { ".ORDER", Order, 0 }, { ".PARALLEL", Parallel, 0 }, { ".PATH", ExPath, 0 }, { ".PHONY", Phony, OP_PHONY }, { ".PRECIOUS", Precious, OP_PRECIOUS }, { ".RECURSIVE", Attribute, OP_MAKE }, { ".SHELL", ExShell, 0 }, { ".SILENT", Silent, OP_SILENT }, { ".SINGLESHELL", SingleShell, 0 }, { ".SUFFIXES", Suffixes, 0 }, { ".USE", Attribute, OP_USE }, { ".WAIT", Wait, 0 }, }; static int ParseFindKeyword(const char *); static void ParseLinkSrc(GNode *, GNode *); static int ParseDoOp(GNode *, int); static int ParseAddDep(GNode *, GNode *); static void ParseDoSrc(int, const char *); static int ParseFindMain(void *, void *); static void ParseAddDir(void *, void *); static void ParseClearPath(void *); static void ParseDoDependency(char *); static void ParseAddCmd(void *, void *); static void ParseHasCommands(void *); static void ParseDoInclude(char *); static void ParseTraditionalInclude(char *); static void ParseConditionalInclude(char *); static void ParseLookupIncludeFile(char *, char *, bool, bool); #define ParseReadLoopLine(linebuf) Parse_ReadUnparsedLine(linebuf, "for loop") static void ParseFinishDependency(void); static bool ParseIsCond(Buffer, Buffer, char *); static char *strip_comments(Buffer, const char *); static void ParseDoCommands(const char *); /*- *---------------------------------------------------------------------- * ParseFindKeyword -- * Look in the table of keywords for one matching the given string. * * Results: * The index of the keyword, or -1 if it isn't there. *---------------------------------------------------------------------- */ static int ParseFindKeyword(str) const char *str; /* String to find */ { int start, end, cur; int diff; start = 0; end = (sizeof(parseKeywords)/sizeof(parseKeywords[0])) - 1; do { cur = start + (end - start) / 2; diff = strcmp(str, parseKeywords[cur].name); if (diff == 0) { return cur; } else if (diff < 0) { end = cur - 1; } else { start = cur + 1; } } while (start <= end); return -1; } /*- *--------------------------------------------------------------------- * ParseLinkSrc -- * Link the parent node to its new child. Used by * ParseDoDependency. If the specType isn't 'Not', the parent * isn't linked as a parent of the child. * * Side Effects: * New elements are added to the parents list of cgn and the * children list of cgn. the unmade field of pgn is updated * to reflect the additional child. *--------------------------------------------------------------------- */ static void ParseLinkSrc(pgn, cgn) GNode *pgn; /* The parent node */ GNode *cgn; /* The child node */ { if (Lst_AddNew(&pgn->children, cgn)) { if (specType == Not) Lst_AtEnd(&cgn->parents, pgn); pgn->unmade++; } } /*- *--------------------------------------------------------------------- * ParseDoOp -- * Apply the parsed operator to the given target node. Used in a * Lst_Find call by ParseDoDependency once all targets have * been found and their operator parsed. If the previous and new * operators are incompatible, a major error is taken. * * Side Effects: * The type field of the node is altered to reflect any new bits in * the op. *--------------------------------------------------------------------- */ static int ParseDoOp(gn, op) GNode *gn; /* The node to which the operator is to be * applied */ int op; /* The operator to apply */ { /* * If the dependency mask of the operator and the node don't match and * the node has actually had an operator applied to it before, and * the operator actually has some dependency information in it, complain. */ if (((op & OP_OPMASK) != (gn->type & OP_OPMASK)) && !OP_NOP(gn->type) && !OP_NOP(op)) { Parse_Error(PARSE_FATAL, "Inconsistent operator for %s", gn->name); return 0; } if (op == OP_DOUBLEDEP && ((gn->type & OP_OPMASK) == OP_DOUBLEDEP)) { /* If the node was the object of a :: operator, we need to create a * new instance of it for the children and commands on this dependency * line. The new instance is placed on the 'cohorts' list of the * initial one (note the initial one is not on its own cohorts list) * and the new instance is linked to all parents of the initial * instance. */ GNode *cohort; LstNode ln; unsigned int i; cohort = Targ_NewGN(gn->name); /* Duplicate links to parents so graph traversal is simple. Perhaps * some type bits should be duplicated? * * Make the cohort invisible as well to avoid duplicating it into * other variables. True, parents of this target won't tend to do * anything with their local variables, but better safe than * sorry. */ for (ln = Lst_First(&gn->parents); ln != NULL; ln = Lst_Adv(ln)) ParseLinkSrc((GNode *)Lst_Datum(ln), cohort); cohort->type = OP_DOUBLEDEP|OP_INVISIBLE; Lst_AtEnd(&gn->cohorts, cohort); /* Replace the node in the targets list with the new copy */ for (i = 0; i < gtargets.n; i++) if (gtargets.a[i] == gn) break; gtargets.a[i] = cohort; gn = cohort; } /* We don't want to nuke any previous flags (whatever they were) so we * just OR the new operator into the old. */ gn->type |= op; return 1; } /*- *--------------------------------------------------------------------- * ParseAddDep -- * Check if the pair of GNodes given needs to be synchronized. * This has to be when two nodes are on different sides of a * .WAIT directive. * * Results: * Returns 0 if the two targets need to be ordered, 1 otherwise. * If it returns 0, the search can stop. * * Side Effects: * A dependency can be added between the two nodes. * *--------------------------------------------------------------------- */ static int ParseAddDep(p, s) GNode *p; GNode *s; { if (p->order < s->order) { /* XXX: This can cause loops, and loops can cause unmade targets, * but checking is tedious, and the debugging output can show the * problem. */ Lst_AtEnd(&p->successors, s); Lst_AtEnd(&s->preds, p); return 1; } else return 0; } /*- *--------------------------------------------------------------------- * ParseDoSrc -- * Given the name of a source, figure out if it is an attribute * and apply it to the targets if it is. Else decide if there is * some attribute which should be applied *to* the source because * of some special target and apply it if so. Otherwise, make the * source be a child of the targets in the list 'targets' * * Side Effects: * Operator bits may be added to the list of targets or to the source. * The targets may have a new source added to their lists of children. *--------------------------------------------------------------------- */ static void ParseDoSrc(tOp, src) int tOp; /* operator (if any) from special targets */ const char *src; /* name of the source to handle */ { GNode *gn = NULL; if (*src == '.' && isupper(src[1])) { int keywd = ParseFindKeyword(src); if (keywd != -1) { int op = parseKeywords[keywd].op; if (op != 0) { Array_Find(>argets, ParseDoOp, op); return; } if (parseKeywords[keywd].spec == Wait) { waiting++; return; } } } switch (specType) { case Main: /* * If we have noted the existence of a .MAIN, it means we need * to add the sources of said target to the list of things * to create. The string 'src' is likely to be freed, so we * must make a new copy of it. Note that this will only be * invoked if the user didn't specify a target on the command * line. This is to allow #ifmake's to succeed, or something... */ Lst_AtEnd(create, estrdup(src)); /* * Add the name to the .TARGETS variable as well, so the user can * employ that, if desired. */ Var_Append(".TARGETS", src, VAR_GLOBAL); return; case Order: /* * Create proper predecessor/successor links between the previous * source and the current one. */ gn = Targ_FindNode(src, TARG_CREATE); if (predecessor != NULL) { Lst_AtEnd(&predecessor->successors, gn); Lst_AtEnd(&gn->preds, predecessor); } /* * The current source now becomes the predecessor for the next one. */ predecessor = gn; break; default: /* * If the source is not an attribute, we need to find/create * a node for it. After that we can apply any operator to it * from a special target or link it to its parents, as * appropriate. * * In the case of a source that was the object of a :: operator, * the attribute is applied to all of its instances (as kept in * the 'cohorts' list of the node) or all the cohorts are linked * to all the targets. */ gn = Targ_FindNode(src, TARG_CREATE); if (tOp) { gn->type |= tOp; } else { Array_ForEach(>argets, ParseLinkSrc, gn); } if ((gn->type & OP_OPMASK) == OP_DOUBLEDEP) { GNode *cohort; LstNode ln; for (ln=Lst_First(&gn->cohorts); ln != NULL; ln = Lst_Adv(ln)){ cohort = (GNode *)Lst_Datum(ln); if (tOp) { cohort->type |= tOp; } else { Array_ForEach(>argets, ParseLinkSrc, cohort); } } } break; } gn->order = waiting; Array_AtEnd(&gsources, gn); if (waiting) { Array_Find(&gsources, ParseAddDep, gn); } } /*- *----------------------------------------------------------------------- * ParseFindMain -- * Find a real target in the list and set it to be the main one. * Called by ParseDoDependency when a main target hasn't been found * yet. * * Results: * 1 if main not found yet, 0 if it is. * * Side Effects: * mainNode is changed and Targ_SetMain is called. *----------------------------------------------------------------------- */ static int ParseFindMain(gnp, dummy) void *gnp; /* Node to examine */ void *dummy UNUSED; { GNode *gn = (GNode *)gnp; if ((gn->type & OP_NOTARGET) == 0) { mainNode = gn; Targ_SetMain(gn); return 0; } else { return 1; } } /*- *----------------------------------------------------------------------- * ParseAddDir -- * Front-end for Dir_AddDir to make sure Lst_ForEach keeps going * * Side Effects: * See Dir_AddDir. *----------------------------------------------------------------------- */ static void ParseAddDir(path, name) void *path; void *name; { Dir_AddDir((Lst)path, (char *)name); } /*- *----------------------------------------------------------------------- * ParseClearPath -- * Reinit path to an empty path *----------------------------------------------------------------------- */ static void ParseClearPath(p) void *p; { Lst path = (Lst)p; Lst_Destroy(path, Dir_Destroy); Lst_Init(path); } /*- *--------------------------------------------------------------------- * ParseDoDependency -- * Parse the dependency line in line. * * Side Effects: * The nodes of the sources are linked as children to the nodes of the * targets. Some nodes may be created. * * We parse a dependency line by first extracting words from the line and * finding nodes in the list of all targets with that name. This is done * until a character is encountered which is an operator character. Currently * these are only ! and :. At this point the operator is parsed and the * pointer into the line advanced until the first source is encountered. * The parsed operator is applied to each node in the 'targets' list, * which is where the nodes found for the targets are kept, by means of * the ParseDoOp function. * The sources are read in much the same way as the targets were except * that now they are expanded using the wildcarding scheme of the C-Shell * and all instances of the resulting words in the list of all targets * are found. Each of the resulting nodes is then linked to each of the * targets as one of its children. * Certain targets are handled specially. These are the ones detailed * by the specType variable. * The storing of transformation rules is also taken care of here. * A target is recognized as a transformation rule by calling * Suff_IsTransform. If it is a transformation rule, its node is gotten * from the suffix module via Suff_AddTransform rather than the standard * Targ_FindNode in the target module. *--------------------------------------------------------------------- */ static void ParseDoDependency(line) char *line; /* the line to parse */ { char *cp; /* our current position */ GNode *gn; /* a general purpose temporary node */ int op; /* the operator on the line */ char savec; /* a place to save a character */ LIST paths; /* List of search paths to alter when parsing * a list of .PATH targets */ int tOp; /* operator from special target */ tOp = 0; specType = Not; waiting = 0; Lst_Init(&paths); Array_Reset(&gsources); do { for (cp = line; *cp && !isspace(*cp) && *cp != '(';) if (*cp == '$') /* Must be a dynamic source (would have been expanded * otherwise), so call the Var module to parse the puppy * so we can safely advance beyond it...There should be * no errors in this, as they would have been discovered * in the initial Var_Subst and we wouldn't be here. */ cp += Var_ParseSkip(cp, NULL, NULL); else { /* We don't want to end a word on ':' or '!' if there is a * better match later on in the string. By "better" I mean * one that is followed by whitespace. This allows the user * to have targets like: * fie::fi:fo: fum * where "fie::fi:fo" is the target. In real life this is used * for perl5 library man pages where "::" separates an object * from its class. Ie: "File::Spec::Unix". This behaviour * is also consistent with other versions of make. */ if (*cp == '!' || *cp == ':') { char *p = cp + 1; if (*cp == ':' && *p == ':') p++; /* Found the best match already. */ if (isspace(*p) || *p == '\0') break; do { p += strcspn(p, "!:"); if (*p == '\0') break; p++; } while (!isspace(*p)); /* No better match later on... */ if (*p == '\0') break; } cp++; } if (*cp == '(') { LIST temp; Lst_Init(&temp); /* Archives must be handled specially to make sure the OP_ARCHV * flag is set in their 'type' field, for one thing, and because * things like "archive(file1.o file2.o file3.o)" are permissible. * Arch_ParseArchive will set 'line' to be the first non-blank * after the archive-spec. It creates/finds nodes for the members * and places them on the given list, returning true if all * went well and false if there was an error in the * specification. On error, line should remain untouched. */ if (!Arch_ParseArchive(&line, &temp, NULL)) { Parse_Error(PARSE_FATAL, "Error in archive specification: \"%s\"", line); return; } else { AppendList2Array(&temp, >argets); Lst_Destroy(&temp, NOFREE); continue; } } savec = *cp; if (*cp == '\0') { /* Ending a dependency line without an operator is a Bozo no-no */ Parse_Error(PARSE_FATAL, "Need an operator"); return; } *cp = '\0'; /* Have a word in line. See if it's a special target and set * specType to match it. */ if (*line == '.' && isupper(line[1])) { /* See if the target is a special target that must have it * or its sources handled specially. */ int keywd = ParseFindKeyword(line); if (keywd != -1) { if (specType == ExPath && parseKeywords[keywd].spec != ExPath) { Parse_Error(PARSE_FATAL, "Mismatched special targets"); return; } specType = parseKeywords[keywd].spec; tOp = parseKeywords[keywd].op; /* * Certain special targets have special semantics: * .PATH Have to set the dirSearchPath * variable too * .MAIN Its sources are only used if * nothing has been specified to * create. * .DEFAULT Need to create a node to hang * commands on, but we don't want * it in the graph, nor do we want * it to be the Main Target, so we * create it, set OP_NOTMAIN and * add it to the list, setting * DEFAULT to the new node for * later use. We claim the node is * A transformation rule to make * life easier later, when we'll * use Make_HandleUse to actually * apply the .DEFAULT commands. * .PHONY The list of targets * .NOPATH Don't search for file in the path * .BEGIN * .END * .INTERRUPT Are not to be considered the * main target. * .NOTPARALLEL Make only one target at a time. * .SINGLESHELL Create a shell for each command. * .ORDER Must set initial predecessor to NULL */ switch (specType) { case ExPath: Lst_AtEnd(&paths, dirSearchPath); break; case Main: if (!Lst_IsEmpty(create)) { specType = Not; } break; case Begin: case End: case Interrupt: gn = Targ_FindNode(line, TARG_CREATE); gn->type |= OP_NOTMAIN; Array_AtEnd(>argets, gn); break; case Default: gn = Targ_NewGN(".DEFAULT"); gn->type |= OP_NOTMAIN|OP_TRANSFORM; Array_AtEnd(>argets, gn); DEFAULT = gn; break; case NotParallel: { extern int maxJobs; maxJobs = 1; break; } case SingleShell: compatMake = 1; break; case Order: predecessor = NULL; break; default: break; } } else if (strncmp(line, ".PATH", 5) == 0) { /* * .PATH has to be handled specially. * Call on the suffix module to give us a path to * modify. */ Lst path; specType = ExPath; path = Suff_GetPath(&line[5]); if (path == NULL) { Parse_Error(PARSE_FATAL, "Suffix '%s' not defined (yet)", &line[5]); return; } else { Lst_AtEnd(&paths, path); } } } /* * Have word in line. Get or create its node and stick it at * the end of the targets list */ if (specType == Not && *line != '\0') { char *targName; if (Dir_HasWildcards(line)) { /* * Targets are to be sought only in the current directory, * so create an empty path for the thing. Note we need to * use Dir_Destroy in the destruction of the path as the * Dir module could have added a directory to the path... */ LIST emptyPath; LIST curTargs; /* list of target names to be found * and added to the targets list */ Lst_Init(&emptyPath); Lst_Init(&curTargs); Dir_Expand(line, &emptyPath, &curTargs); Lst_Destroy(&emptyPath, Dir_Destroy); while ((targName = (char *)Lst_DeQueue(&curTargs)) != NULL) { if (!Suff_IsTransform(targName)) gn = Targ_FindNode(targName, TARG_CREATE); else gn = Suff_AddTransform(targName); if (gn != NULL) Array_AtEnd(>argets, gn); } Lst_Destroy(&curTargs, NOFREE); } else { if (!Suff_IsTransform(line)) gn = Targ_FindNode(line, TARG_CREATE); else gn = Suff_AddTransform(line); if (gn != NULL) Array_AtEnd(>argets, gn); /* Don't need the list of target names anymore... */ } } else if (specType == ExPath && *line != '.' && *line != '\0') Parse_Error(PARSE_WARNING, "Extra target (%s) ignored", line); *cp = savec; /* * If it is a special type and not .PATH, it's the only target we * allow on this line... */ if (specType != Not && specType != ExPath) { bool warn = false; while (*cp != '!' && *cp != ':' && *cp) { if (*cp != ' ' && *cp != '\t') { warn = true; } cp++; } if (warn) { Parse_Error(PARSE_WARNING, "Extra target ignored"); } } else { while (*cp && isspace(*cp)) { cp++; } } line = cp; } while (*line != '!' && *line != ':' && *line); if (!Array_IsEmpty(>argets)) { switch (specType) { default: Parse_Error(PARSE_WARNING, "Special and mundane targets don't mix. Mundane ones ignored"); break; case Default: case Begin: case End: case Interrupt: /* These four create nodes on which to hang commands, so * targets shouldn't be empty... */ case Not: /* Nothing special here -- targets can be empty if it wants. */ break; } } /* Have now parsed all the target names. Must parse the operator next. The * result is left in op . */ if (*cp == '!') { op = OP_FORCE; } else if (*cp == ':') { if (cp[1] == ':') { op = OP_DOUBLEDEP; cp++; } else { op = OP_DEPENDS; } } else { Parse_Error(PARSE_FATAL, "Missing dependency operator"); return; } cp++; /* Advance beyond operator */ Array_Find(>argets, ParseDoOp, op); /* * Get to the first source */ while (*cp && isspace(*cp)) { cp++; } line = cp; /* * Several special targets take different actions if present with no * sources: * a .SUFFIXES line with no sources clears out all old suffixes * a .PRECIOUS line makes all targets precious * a .IGNORE line ignores errors for all targets * a .SILENT line creates silence when making all targets * a .PATH removes all directories from the search path(s). */ if (!*line) { switch (specType) { case Suffixes: Suff_ClearSuffixes(); break; case Precious: allPrecious = true; break; case Ignore: ignoreErrors = true; break; case Silent: beSilent = true; break; case ExPath: Lst_Every(&paths, ParseClearPath); break; default: break; } } else if (specType == MFlags) { /* * Call on functions in main.c to deal with these arguments and * set the initial character to a null-character so the loop to * get sources won't get anything */ Main_ParseArgLine(line); *line = '\0'; } else if (specType == ExShell) { if (!Job_ParseShell(line)) { Parse_Error(PARSE_FATAL, "improper shell specification"); return; } *line = '\0'; } else if (specType == NotParallel || specType == SingleShell) { *line = '\0'; } /* * NOW GO FOR THE SOURCES */ if (specType == Suffixes || specType == ExPath || specType == Includes || specType == Libs || specType == Null) { while (*line) { /* * If the target was one that doesn't take files as its sources * but takes something like suffixes, we take each * space-separated word on the line as a something and deal * with it accordingly. * * If the target was .SUFFIXES, we take each source as a * suffix and add it to the list of suffixes maintained by the * Suff module. * * If the target was a .PATH, we add the source as a directory * to search on the search path. * * If it was .INCLUDES, the source is taken to be the suffix of * files which will be #included and whose search path should * be present in the .INCLUDES variable. * * If it was .LIBS, the source is taken to be the suffix of * files which are considered libraries and whose search path * should be present in the .LIBS variable. * * If it was .NULL, the source is the suffix to use when a file * has no valid suffix. */ char savec; while (*cp && !isspace(*cp)) { cp++; } savec = *cp; *cp = '\0'; switch (specType) { case Suffixes: Suff_AddSuffix(line); break; case ExPath: Lst_ForEach(&paths, ParseAddDir, line); break; case Includes: Suff_AddInclude(line); break; case Libs: Suff_AddLib(line); break; case Null: Suff_SetNull(line); break; default: break; } *cp = savec; if (savec != '\0') { cp++; } while (*cp && isspace(*cp)) { cp++; } line = cp; } Lst_Destroy(&paths, NOFREE); } else { while (*line) { /* * The targets take real sources, so we must beware of archive * specifications (i.e. things with left parentheses in them) * and handle them accordingly. */ while (*cp && !isspace(*cp)) { if (*cp == '(' && cp > line && cp[-1] != '$') { /* * Only stop for a left parenthesis if it isn't at the * start of a word (that'll be for variable changes * later) and isn't preceded by a dollar sign (a dynamic * source). */ break; } else { cp++; } } if (*cp == '(') { GNode *gn; LIST sources; /* list of archive source names after * expansion */ Lst_Init(&sources); if (!Arch_ParseArchive(&line, &sources, NULL)) { Parse_Error(PARSE_FATAL, "Error in source archive spec \"%s\"", line); return; } while ((gn = (GNode *)Lst_DeQueue(&sources)) != NULL) ParseDoSrc(tOp, gn->name); cp = line; } else { if (*cp) { *cp = '\0'; cp += 1; } ParseDoSrc(tOp, line); } while (*cp && isspace(*cp)) { cp++; } line = cp; } } if (mainNode == NULL) { /* If we have yet to decide on a main target to make, in the * absence of any user input, we want the first target on * the first dependency line that is actually a real target * (i.e. isn't a .USE or .EXEC rule) to be made. */ Array_Find(>argets, ParseFindMain, NULL); } /* Finally, destroy the list of sources. */ } /*- * ParseAddCmd -- * Lst_ForEach function to add a command line to all targets * * Side Effects: * A new element is added to the commands list of the node. */ static void ParseAddCmd(gnp, cmd) void *gnp; /* the node to which the command is to be added */ void *cmd; /* the command to add */ { GNode *gn = (GNode *)gnp; /* if target already supplied, ignore commands */ if (!(gn->type & OP_HAS_COMMANDS)) { Lst_AtEnd(&gn->commands, cmd); if (!gn->lineno) { gn->lineno = Parse_Getlineno(); gn->fname = Parse_Getfilename(); } } } /*- *----------------------------------------------------------------------- * ParseHasCommands -- * Callback procedure for Parse_File when destroying the list of * targets on the last dependency line. Marks a target as already * having commands if it does, to keep from having shell commands * on multiple dependency lines. * * Side Effects: * OP_HAS_COMMANDS may be set for the target. *----------------------------------------------------------------------- */ static void ParseHasCommands(gnp) void *gnp; /* Node to examine */ { GNode *gn = (GNode *)gnp; if (!Lst_IsEmpty(&gn->commands)) { gn->type |= OP_HAS_COMMANDS; } } /*- *----------------------------------------------------------------------- * Parse_AddIncludeDir -- * Add a directory to the path searched for included makefiles * bracketed by double-quotes. Used by functions in main.c *----------------------------------------------------------------------- */ void Parse_AddIncludeDir(dir) const char *dir; /* The name of the directory to add */ { Dir_AddDir(parseIncPath, dir); } /*- *--------------------------------------------------------------------- * ParseDoInclude -- * Push to another file. * * The input is the line minus the #include. A file spec is a string * enclosed in <> or "". The former is looked for only in sysIncPath. * The latter in . and the directories specified by -I command line * options * * Side Effects: * old parse context is pushed on the stack, new file becomes * current context. *--------------------------------------------------------------------- */ static void ParseDoInclude(file) char *file; /* file specification */ { char endc; /* the character which ends the file spec */ char *cp; /* current position in file spec */ bool isSystem; /* true if makefile is a system makefile */ /* Skip to delimiter character so we know where to look. */ while (*file == ' ' || *file == '\t') file++; if (*file != '"' && *file != '<') { Parse_Error(PARSE_FATAL, ".include filename must be delimited by '\"' or '<'"); return; } /* Set the search path on which to find the include file based on the * characters which bracket its name. Angle-brackets imply it's * a system Makefile while double-quotes imply it's a user makefile */ if (*file == '<') { isSystem = true; endc = '>'; } else { isSystem = false; endc = '"'; } /* Skip to matching delimiter. */ for (cp = ++file; *cp != endc; cp++) { if (*cp == '\0') { Parse_Error(PARSE_FATAL, "Unclosed %cinclude filename. '%c' expected", '.', endc); return; } } ParseLookupIncludeFile(file, cp, isSystem, true); } /*- *--------------------------------------------------------------------- * ParseTraditionalInclude -- * Push to another file. * * The input is the line minus the "include". The file name is * the string following the "include". * * Side Effects: * old parse context is pushed on the stack, new file becomes * current context. * * XXX May wish to support multiple files and wildcards ? *--------------------------------------------------------------------- */ static void ParseTraditionalInclude(file) char *file; /* file specification */ { char *cp; /* current position in file spec */ /* Skip over whitespace. */ while (isspace(*file)) file++; if (*file == '\0') { Parse_Error(PARSE_FATAL, "Filename missing from \"include\""); return; } /* Skip to end of line or next whitespace. */ for (cp = file; *cp != '\0' && !isspace(*cp);) cp++; ParseLookupIncludeFile(file, cp, true, true); } /*- *--------------------------------------------------------------------- * ParseConditionalInclude -- * May push to another file. * * No error if the file does not exist. * See ParseTraditionalInclude otherwise. *--------------------------------------------------------------------- */ static void ParseConditionalInclude(file) char *file; /* file specification */ { char *cp; /* current position in file spec */ /* Skip over whitespace. */ while (isspace(*file)) file++; if (*file == '\0') { Parse_Error(PARSE_FATAL, "Filename missing from \"include\""); return; } /* Skip to end of line or next whitespace. */ for (cp = file; *cp != '\0' && !isspace(*cp);) cp++; ParseLookupIncludeFile(file, cp, true, false); } /* Common part to lookup and read an include file. */ static void ParseLookupIncludeFile(spec, endSpec, isSystem, errIfNotFound) char *spec; char *endSpec; bool isSystem; bool errIfNotFound; { char *file; char *fullname; char endc; /* Substitute for any variables in the file name before trying to * find the thing. */ endc = *endSpec; *endSpec = '\0'; file = Var_Subst(spec, NULL, false); *endSpec = endc; /* Now that we know the file name and its search path, we attempt to * find the durn thing. NULL indicates the file still hasn't been * found. */ fullname = NULL; /* Handle non-system non-absolute files... */ if (!isSystem && file[0] != '/') { /* ... by first searching relative to the including file's * location. We don't want to cd there, of course, so we * just tack on the old file's leading path components * and call Dir_FindFile to see if we can locate the beast. */ char *slash; const char *fname; fname = Parse_Getfilename(); slash = strrchr(fname, '/'); if (slash != NULL) { char *newName; newName = Str_concati(fname, slash, file, strchr(file, '\0'), '/'); fullname = Dir_FindFile(newName, parseIncPath); if (fullname == NULL) fullname = Dir_FindFile(newName, dirSearchPath); free(newName); } } /* Now look first on the -I search path, then on the .PATH * search path, if not found in a -I directory. * XXX: Suffix specific? */ if (fullname == NULL) fullname = Dir_FindFile(file, parseIncPath); if (fullname == NULL) fullname = Dir_FindFile(file, dirSearchPath); /* Still haven't found the makefile. Look for it on the system * path as a last resort. */ if (fullname == NULL) fullname = Dir_FindFile(file, sysIncPath); if (fullname == NULL && errIfNotFound) Parse_Error(PARSE_FATAL, "Could not find %s", file); free(file); if (fullname != NULL) { FILE *f; f = fopen(fullname, "r"); if (f == NULL && errIfNotFound) { Parse_Error(PARSE_FATAL, "Cannot open %s", fullname); } else { /* Once we find the absolute path to the file, we push the current * stream to the includes stack, and start reading from the new * file. We set up the file name to be its absolute name so that * error messages are informative. */ Parse_FromFile(fullname, f); } } } /* Strip comments from the line. May return either a copy of the line, or * the line itself. */ static char * strip_comments(copy, line) Buffer copy; const char *line; { const char *comment; const char *p; comment = strchr(line, '#'); assert(comment != line); if (comment == NULL) return (char *)line; else { Buf_Reset(copy); for (p = line; *p != '\0'; p++) { if (*p == '\\') { if (p[1] == '#') { Buf_Addi(copy, line, p); Buf_AddChar(copy, '#'); line = p+2; } if (p[1] != '\0') p++; } else if (*p == '#') break; } Buf_Addi(copy, line, p); Buf_KillTrailingSpaces(copy); return Buf_Retrieve(copy); } } static bool ParseIsCond(linebuf, copy, line) Buffer linebuf; Buffer copy; char *line; { char *stripped; while (*line != '\0' && isspace(*line)) line++; /* The line might be a conditional. Ask the conditional module * about it and act accordingly. */ switch (Cond_Eval(line)) { case COND_SKIP: /* Skip to next conditional that evaluates to COND_PARSE. */ do { line = Parse_ReadNextConditionalLine(linebuf); if (line != NULL) { while (*line != '\0' && isspace(*line)) line++; stripped = strip_comments(copy, line); } } while (line != NULL && Cond_Eval(stripped) != COND_PARSE); /* FALLTHROUGH */ case COND_PARSE: return true; case COND_ISFOR: { For *loop; loop = For_Eval(line+3); if (loop != NULL) { bool ok; do { /* Find the matching endfor. */ line = ParseReadLoopLine(linebuf); if (line == NULL) { Parse_Error(PARSE_FATAL, "Unexpected end of file in for loop.\n"); return false; } ok = For_Accumulate(loop, line); } while (ok); For_Run(loop); return true; } break; } case COND_ISINCLUDE: ParseDoInclude(line + 7); return true; case COND_ISUNDEF: { char *cp; line+=5; while (*line != '\0' && isspace(*line)) line++; for (cp = line; !isspace(*cp) && *cp != '\0';) cp++; *cp = '\0'; Var_Delete(line); return true; } default: break; } return false; } /*- *----------------------------------------------------------------------- * ParseFinishDependency -- * Handle the end of a dependency group. * * Side Effects: * 'targets' list destroyed. * *----------------------------------------------------------------------- */ static void ParseFinishDependency() { Array_Every(>argets, Suff_EndTransform); Array_Every(>argets, ParseHasCommands); Array_Reset(>argets); } static void ParseDoCommands(line) const char *line; { /* add the command to the list of * commands of all targets in the dependency spec */ char *cmd = estrdup(line); Array_ForEach(>argets, ParseAddCmd, cmd); #ifdef CLEANUP Lst_AtEnd(&targCmds, cmd); #endif } void Parse_File(name, stream) const char *name; /* the name of the file being read */ FILE *stream; /* Stream open to makefile to parse */ { char *cp, /* pointer into the line */ *line; /* the line we're working on */ bool inDependency; /* true if currently in a dependency * line or its commands */ BUFFER buf; BUFFER copy; Buf_Init(&buf, MAKE_BSIZE); Buf_Init(©, MAKE_BSIZE); inDependency = false; Parse_FromFile(name, stream); do { while ((line = Parse_ReadNormalLine(&buf)) != NULL) { if (*line == '\t') { if (inDependency) ParseDoCommands(line+1); else Parse_Error(PARSE_FATAL, "Unassociated shell command \"%s\"", line); } else { char *stripped; stripped = strip_comments(©, line); if (*stripped == '.' && ParseIsCond(&buf, ©, stripped+1)) ; else if (FEATURES(FEATURE_SYSVINCLUDE) && strncmp(stripped, "include", 7) == 0 && isspace(stripped[7]) && strchr(stripped, ':') == NULL) { /* It's an S3/S5-style "include". */ ParseTraditionalInclude(stripped + 7); } else if (FEATURES(FEATURE_CONDINCLUDE) && (*stripped == '-' || *stripped == 's') && strncmp(stripped+1, "include", 7) == 0 && isspace(stripped[8]) && strchr(stripped, ':') == NULL) { ParseConditionalInclude(stripped+8); } else { char *dep; if (inDependency) ParseFinishDependency(); if (Parse_DoVar(stripped, VAR_GLOBAL)) inDependency = false; else { size_t pos; char *end; /* Need a new list for the target nodes. */ Array_Reset(>argets); inDependency = true; dep = NULL; /* First we need to find eventual dependencies */ pos = strcspn(stripped, ":!"); /* go over :!, and find ; */ if (stripped[pos] != '\0' && (end = strchr(stripped+pos+1, ';')) != NULL) { if (line != stripped) /* find matching ; in original... The * original might be slightly longer. */ dep = strchr(line+(end-stripped), ';'); else dep = end; /* kill end of line. */ *end = '\0'; } /* We now know it's a dependency line so it needs to * have all variables expanded before being parsed. * Tell the variable module to complain if some * variable is undefined... */ cp = Var_Subst(stripped, NULL, true); ParseDoDependency(cp); free(cp); /* Parse dependency if it's not empty. */ if (dep != NULL) { do { dep++; } while (isspace(*dep)); if (*dep != '\0') ParseDoCommands(dep); } } } } } } while (Parse_NextFile()); if (inDependency) ParseFinishDependency(); /* Make sure conditionals are clean. */ Cond_End(); Parse_ReportErrors(); Buf_Destroy(&buf); Buf_Destroy(©); } void Parse_Init() { mainNode = NULL; Static_Lst_Init(parseIncPath); Static_Lst_Init(sysIncPath); Array_Init(&gsources, SOURCES_SIZE); Array_Init(>argets, TARGETS_SIZE); LowParse_Init(); #ifdef CLEANUP Static_Lst_Init(&targCmds); #endif } #ifdef CLEANUP void Parse_End() { Lst_Destroy(&targCmds, (SimpleProc)free); Lst_Destroy(sysIncPath, Dir_Destroy); Lst_Destroy(parseIncPath, Dir_Destroy); LowParse_End(); } #endif void Parse_MainName(listmain) Lst listmain; /* result list */ { if (mainNode == NULL) { Punt("no target to make."); /*NOTREACHED*/ } else if (mainNode->type & OP_DOUBLEDEP) { Lst_AtEnd(listmain, mainNode); Lst_Concat(listmain, &mainNode->cohorts); } else Lst_AtEnd(listmain, mainNode); }