.\"	$OpenBSD: radioctl.1,v 1.12 2007/05/31 19:20:14 jmc Exp $
.\"
.\" Copyright (c) 2001 Vladimir Popov
.\" All rights reserved.
.\"
.\" Redistribution and use in source and binary forms, with or without
.\" modification, are permitted provided that the following conditions
.\" are met:
.\" 1. Redistributions of source code must retain the above copyright
.\"    notice, this list of conditions and the following disclaimer.
.\" 2. Redistributions in binary form must reproduce the above copyright
.\"    notice, this list of conditions and the following disclaimer in the
.\"    documentation and/or other materials provided with the distribution.
.\"
.\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
.\" IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
.\" OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
.\" IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
.\" INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
.\" BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
.\" USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
.\" ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
.\" (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
.\" THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
.\"
.Dd $Mdocdate: May 31 2007 $
.Dt RADIOCTL 1
.Os
.Sh NAME
.Nm radioctl
.Nd control radio tuners
.Sh SYNOPSIS
.Nm radioctl
.Op Fl f Ar file
.Op Fl nv
.Fl a
.Nm radioctl
.Op Fl f Ar file
.Op Fl nv
.Ar name
.Nm radioctl
.Op Fl f Ar file
.Op Fl n
.Ar name Ns Li = Ns Ar value
.Sh DESCRIPTION
The
.Nm
command displays or sets various variables that affect the radio tuner
behavior.
If a variable is present on the command line,
.Nm
prints the current value of this variable for the specified device.
By default,
.Nm
operates on the
.Pa /dev/radio
device.
.Pp
The options are as follows:
.Bl -tag -width Ds
.It Fl a
Print all device variables and their current values.
.It Fl f Ar file
Specify an alternative radio tuner device.
.It Fl n
Suppress printing of the variable name.
.It Fl v
Show the possible values of queries.
.It Ar name Ns Li = Ns Ar value
Attempt to set the specified variable
.Ar name
to
.Ar value .
.El
.Pp
Values may be specified in either absolute or relative forms.
The relative form is indicated by a prefix of
.Ql +
or
.Ql -
to denote an increase or decrease, respectively.
.Pp
The exact set of controls that can be manipulated depends on
the tuner.
The general format (in both getting and setting a value) is:
.Bd -filled -offset indent
.Ar name Ns Li = Ns Ar value
.Ed
.Pp
The
.Ar name
indicates what part of the tuner the control affects.
.Pp
Write only controls:
.Bl -tag -width Ds
.It Ar search
Only for cards that allow hardware search.
Can be
.Ql up
or
.Ql down .
.El
.Pp
Read-write controls:
.Bl -tag -width Ds
.It Ar channel
Specifies the TV channel.
Integer value from 0 to 150.
Using the
.Ar channel
control puts the tuner in
.Dq TV
mode.
.It Ar chnlset
Specifies the TV channel set.
The tuner uses the current channel set to derive a frequency from the
.Ar channel .
The following is a list of valid channel sets:
.Pp
.Bl -tag -width "australiaXX" -offset indent -compact
.It nabcst
U.S.A. Broadcast
.It cableirc
U.S.A. Cable IRC
.It cablehrc
U.S.A. Cable HRC
.It weurope
Western Europe
.It jpnbcst
Japan Broadcast
.It jpncable
Japan Cable
.It xussr
Former U.S.S.R. and C.I.S. countries
.It australia
Australia
.It france
France
.El
.It Ar frequency
Specifies the FM frequency in MHz.
Float value from 87.5 to 108.0.
Using the
.Ar frequency
control puts the tuner in
.Dq radio
mode.
.It Ar volume
Integer value from 0 to 255.
.It Ar mute
Mutes the card (volume is not affected),
.Ql on
or
.Ql off .
.It Ar mono
Forces card output to mono,
.Ql on
or
.Ql off .
Only for cards that allow forced mono.
.It Ar reference
Reference frequency.
Can be 25 kHz, 50 kHz and 100 kHz.
Not all cards allow the reference frequency to be changed.
.It Ar sensitivity
Station locking sensitivity.
Can be 5 mkV, 10 mkV, 30 mkV and 150 mkV.
Not all cards allow the station locking sensitivity to be changed.
.El
.Pp
All the remaining controls (mode, signal, stereo and card capabilities)
are read-only and can be viewed using option
.Fl a .
.Sh ENVIRONMENT
The following environment variable affects the execution of
.Nm radioctl :
.Bl -tag -width RADIODEVICE
.It Ev RADIODEVICE
The radio tuner device to use.
.El
.Sh FILES
.Bl -tag -width /dev/radio
.It Pa /dev/radio
radio tuner device
.El
.Sh EXAMPLES
Print all device variables,
along with their current values:
.Bd -literal -offset indent
$ radioctl -a
volume=255
channel=0
chnlset=weurope
frequency=106.30MHz
mute=off
reference=50kHz
signal=on
stereo=on
mode: radio
card capabilities:
        manageable mono/stereo
.Ed
.Sh SEE ALSO
.Xr radio 4
.Sh HISTORY
.Nm
command first appeared in
.Ox 3.0 .