.\" $OpenBSD: radioctl.1,v 1.8 2004/08/08 00:21:55 jaredy Exp $ .\" .\" Copyright (c) 2001 Vladimir Popov .\" All rights reserved. .\" .\" Redistribution and use in source and binary forms, with or without .\" modification, are permitted provided that the following conditions .\" are met: .\" 1. Redistributions of source code must retain the above copyright .\" notice, this list of conditions and the following disclaimer. .\" 2. Redistributions in binary form must reproduce the above copyright .\" notice, this list of conditions and the following disclaimer in the .\" documentation and/or other materials provided with the distribution. .\" .\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR .\" IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES .\" OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. .\" IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, .\" INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, .\" BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF .\" USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON .\" ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT .\" (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF .\" THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. .\" .Dd September 16, 2001 .Dt RADIOCTL 1 .Os .Sh NAME .Nm radioctl .Nd control radio tuners .Sh SYNOPSIS .Nm radioctl .Op Fl f Ar file .Op Fl n .Fl a .Nm radioctl .Op Fl f Ar file .Op Fl n .Ar name .Nm radioctl .Op Fl f Ar file .Op Fl n .Ar name Ns Li = Ns Ar value .Sh DESCRIPTION The .Nm command displays or sets various variables that affect the radio tuner behavior. If a variable is present on the command line, .Nm prints the current value of this variable for the specified device. By default, .Nm operates on the .Pa /dev/radio device. .Pp The options are as follows: .Bl -tag -width Ds .It Fl a Print all device variables and their current values. .It Fl f Ar file Specify an alternative radio tuner device. .It Fl n Suppress printing of the variable name. .It Ar name Ns Li = Ns Ar value Attempt to set the specified variable .Ar name to .Ar value . .El .Pp Values may be specified in either absolute or relative forms. The relative form is indicated by a prefix of .Ql + or .Ql - to denote an increase or decrease, respectively. .Pp The exact set of controls that can be manipulated depends on the tuner. The general format (in both getting and setting a value) is .Pp .Bd -filled -offset indent .Ar name Ns Li = Ns Ar value .Ed .Pp The .Ar name indicates what part of the tuner the control affects. .Pp Write only controls: .Bl -tag -width search .It Ar search Only for cards that allow hardware search. Can be .Ql up or .Ql down . .El .Pp Read-write controls: .Bl -tag -width volume .It Ar frequency Float value from 87.5 to 108.0. .It Ar volume Integer value from 0 to 255. .It Ar mute Mutes the card (volume is not affected), .Ql on or .Ql off . .It Ar mono Forces card output to mono, .Ql on or .Ql off . Only for cards that allow forced mono. .It Ar reference Reference frequency. Can be 25 kHz, 50 kHz and 100 kHz. Not all cards allow the reference frequency to be changed. .It Ar sensitivity Station locking sensitivity. Can be 5 mkV, 10 mkV, 30 mkV and 150 mkV. Not all cards allow the station locking sensitivity to be changed. .El .Pp All the remaining controls (signal, stereo and card capabilities) are read-only and can be viewed using option .Fl a . .Sh ENVIRONMENT The following environment variable affects the execution of .Nm radioctl : .Bl -tag -width RADIODEVICE .It Ev RADIODEVICE The radio tuner device to use. .El .Sh FILES .Bl -tag -width /dev/radio .It Pa /dev/radio radio tuner device .El .Sh EXAMPLES The command .Pp .Dl "$ radioctl -a" .Pp can produce .Bd -literal volume=255 frequency=106.30MHz mute=off reference=50kHz signal=on stereo=on card capabilities: manageable mono/stereo .Ed .Sh SEE ALSO .Xr radio 4 .Sh HISTORY .Nm command first appeared in .Ox 3.0 .