.\" $OpenBSD: rpcgen.1,v 1.15 2013/01/17 21:29:15 jmc Exp $ .\" $NetBSD: rpcgen.1,v 1.5.2.1 1995/12/05 02:51:02 jtc Exp $ .\" from: @(#)rpcgen.new.1 1.1 90/11/09 TIRPC 1.0; from 40.10 of 10/10/89 .\" Copyright (c) 1988,1990 Sun Microsystems, Inc. - All Rights Reserved. .Dd $Mdocdate: January 17 2013 $ .Dt RPCGEN 1 .Os .Sh NAME .Nm rpcgen .Nd RPC protocol compiler .Sh SYNOPSIS .Nm rpcgen .Op Fl aALTNbC .Op Fl D Op Ar name Ns Op =value .Op Fl K Ar secs .Op Fl i Ar lines .Ar infile .Nm rpcgen .Fl c | .Fl h | .Fl l | .Fl m | .Fl t | .Fl S\&c | .Fl S\&s | .Op Fl o Ar outfile .Op Ar infile .Nm rpcgen .Fl c | .Ar nettype .Op Fl o Ar outfile .Op Ar infile .Sh DESCRIPTION .Nm is a tool that generates C code to implement an .Tn RPC protocol. The input is a language similar to C known as .Tn RPC Language (Remote Procedure Call Language). .Nm is normally used as in the first synopsis where it takes an input file and generates up to four output files. If the .Ar infile is named .Pa proto.x , then .Nm will generate a header file in .Pa proto.h , .Tn XDR routines in .Pa proto_xdr.c , server-side stubs in .Pa proto_svc.c , and client-side stubs in .Pa proto_clnt.c . With the .Fl T option, it will also generate the .Tn RPC dispatch table in .Pa proto_tbl.i . With the .Fl S\&c option, it will also generate sample code which would illustrate how to use the remote procedures on the client side. This code would be created in .Pa proto_client.c . With the .Fl S\&s option, it will also generate a sample server code which would illustrate how to write the remote procedures. This code would be created in .Pa proto_server.c . .Pp The server created can be started both by the port monitors (for example, .Xr inetd 8 ) or by itself. When it is started by a port monitor, it creates servers only for the transport for which the file descriptor 0 was passed. The transports are chosen at run time and not at compile time. When the server is self-started, it backgrounds itself by default. A special define symbol .Dv RPC_SVC_FG can be used to run the server process in the foreground. .Pp The second synopsis provides special features which allow for the creation of more sophisticated .Tn RPC servers. These features include support for user provided .Li #defines and .Tn RPC dispatch tables. The entries in the .Tn RPC dispatch table contain: .Pp .Bl -inset -offset indent -compact .It + pointers to the service routine corresponding to that procedure, .It + a pointer to the input and output arguments, .It + the size of these routines .El .Pp A server can use the dispatch table to check authorization and then to execute the service routine; a client library may use it to deal with the details of storage management and .Tn XDR data conversion. .Pp The other three synopses shown above are used when one does not want to generate all the output files, but only a particular one. Some examples of their usage is described in the .Sx EXAMPLES section below. When .Nm is executed with the .Fl s option, it creates servers for that particular class of transports. When executed with the .Fl n option, it creates a server for the transport specified by .Em netid . If .Ar infile is not specified, .Nm accepts the standard input. .Pp The C preprocessor, .Xr cpp 1 is run on the input file before it is actually interpreted by .Nm rpcgen . For each type of output file, .Nm defines a special preprocessor symbol for use by the .Nm programmer: .Pp .Bl -tag -width RPC_CLNT -compact .It Dv RPC_HDR Defined when compiling into header files. .It Dv RPC_XDR Defined when compiling into .Tn XDR routines. .It Dv RPC_SVC Defined when compiling into server-side stubs. .It Dv RPC_CLNT Defined when compiling into client-side stubs. .It Dv RPC_TBL Defined when compiling into .Tn RPC dispatch tables. .El .Pp Any line beginning with .Sq % is passed directly into the output file, uninterpreted by .Nm rpcgen . .Pp For every data type referred to in .Ar infile .Nm assumes that there exists a routine with the string .Dq xdr_ prepended to the name of the data type. If this routine does not exist in the .Tn RPC/XDR library, it must be provided. Providing an undefined data type allows customization of .Tn XDR routines. .Pp The options are as follows: .Bl -tag -width Ds .It Fl a Generate all the files including sample code for client and server side. .It Fl b This generates code for the .Tn SunOS4.1 style of RPC. This is the default. .It Fl c Compile into .Tn XDR routines. .It Fl C Generate code in ANSI C. This option also generates code that could be compiled with the C++ compiler. .It Fl D Ar name Ns Op Ar =value Define a symbol .Dv name . Equivalent to the .Dv #define directive in the source. If no .Dv value is given, .Dv value is defined as 1. This option may be specified more than once. .It Fl h Compile into C data-definitions (a header file). The .Fl T option can be used in conjunction to produce a header file which supports .Tn RPC dispatch tables. .It Fl K Ar secs By default, services created using .Nm wait 120 seconds after servicing a request before exiting. That interval can be changed using the .Fl K flag. To create a server that exits immediately upon servicing a request, .Dq Fl K No 0 can be used. To create a server that never exits, the appropriate argument is .Dq Fl K No -1 . .Pp When monitoring for a server, some port monitors, like the .Tn SVR4 .Xr listen utility, .Em always spawn a new process in response to a service request. If it is known that a server will be used with such a monitor, the server should exit immediately on completion. For such servers, .Nm should be used with .Dq Fl K No -1 . .It Fl l Compile into client-side stubs. .It Fl m Compile into server-side stubs, but do not generate a .Fn main routine. This option is useful for doing callback-routines and for users who need to write their own .Fn main routine to do initialization. .It Fl n Ar netid Compile into server-side stubs for the transport specified by .Ar netid . There should be an entry for .Ar netid in the netconfig database. This option may be specified more than once, so as to compile a server that serves multiple transports. .It Fl N Use the newstyle of .Nm rpcgen . This allows procedures to have multiple arguments. It also uses the style of parameter passing that closely resembles C. So, when passing an argument to a remote procedure you do not have to pass a pointer to the argument but the argument itself. This behaviour is different from the oldstyle of .Nm generated code. The newstyle is not the default case because of backward compatibility. .It Fl o Ar outfile Specify the name of the output file. If none is specified, standard output is used .Po .Fl c Fl h Fl l .Fl m Fl n Fl s modes only .Pc . .It Fl s Ar nettype Compile into server-side stubs for all the transports belonging to the class .Ar nettype . The supported classes are .Em netpath , .Em visible , .Em circuit_n , .Em circuit_v , .Em datagram_n , .Em datagram_v , .Em tcp , and .Em udp [see .Xr rpc 3 for the meanings associated with these classes. Note: .Bx currently supports only the .Em tcp and .Em udp classes]. This option may be specified more than once. Note: the transports are chosen at run time and not at compile time. .It Fl S\&c Generate sample code to show the use of remote procedure and how to bind to the server before calling the client side stubs generated by .Nm rpcgen . .It Fl S\&s Generate skeleton code for the remote procedures on the server side. You would need to fill in the actual code for the remote procedures. .It Fl t Compile into .Tn RPC dispatch table. .It Fl T Generate the code to support .Tn RPC dispatch tables. .El .Pp The options .Fl c , .Fl h , .Fl l , .Fl m , .Fl s , and .Fl t are used exclusively to generate a particular type of file, while the options .Fl D and .Fl T are global and can be used with the other options. .Sh EXAMPLES The command .Bd -literal -offset indent $ rpcgen -T prot.x .Ed .Pp generates the five files: .Pa prot.h , .Pa prot_clnt.c , .Pa prot_svc.c , .Pa prot_xdr.c and .Pa prot_tbl.i . .Pp The following example sends the C data-definitions (header file) to standard output: .Bd -literal -offset indent $ rpcgen -h prot.x .Ed .Pp To send the test version of the .Dv -DTEST , server side stubs for all the transport belonging to the class .Em datagram_n to standard output, use: .Bd -literal -offset indent $ rpcgen -s datagram_n -DTEST prot.x .Ed .Pp To create the server side stubs for the transport indicated by .Em netid .Em tcp , use: .Bd -literal -offset indent $ rpcgen -n tcp -o prot_svc.c prot.x .Ed .Sh NOTES The .Tn RPC Language does not support nesting of structures. As a workaround, structures can be declared at the top-level, and their name used inside other structures in order to achieve the same effect. .Pp Name clashes can occur when using program definitions, since the apparent scoping does not really apply. Most of these can be avoided by giving unique names for programs, versions, procedures, and types. .Pp The server code generated with .Fl n option refers to the transport indicated by .Em netid and hence is very site specific. .Sh SEE ALSO .Xr cpp 1