/* $OpenBSD: clientloop.c,v 1.176 2006/10/11 12:38:03 markus Exp $ */ /* * Author: Tatu Ylonen * Copyright (c) 1995 Tatu Ylonen , Espoo, Finland * All rights reserved * The main loop for the interactive session (client side). * * As far as I am concerned, the code I have written for this software * can be used freely for any purpose. Any derived versions of this * software must be clearly marked as such, and if the derived work is * incompatible with the protocol description in the RFC file, it must be * called by a name other than "ssh" or "Secure Shell". * * * Copyright (c) 1999 Theo de Raadt. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * * * SSH2 support added by Markus Friedl. * Copyright (c) 1999, 2000, 2001 Markus Friedl. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "xmalloc.h" #include "ssh.h" #include "ssh1.h" #include "ssh2.h" #include "packet.h" #include "buffer.h" #include "compat.h" #include "channels.h" #include "dispatch.h" #include "key.h" #include "cipher.h" #include "kex.h" #include "log.h" #include "readconf.h" #include "clientloop.h" #include "sshconnect.h" #include "authfd.h" #include "atomicio.h" #include "sshpty.h" #include "misc.h" #include "monitor_fdpass.h" #include "match.h" #include "msg.h" /* import options */ extern Options options; /* Flag indicating that stdin should be redirected from /dev/null. */ extern int stdin_null_flag; /* Flag indicating that no shell has been requested */ extern int no_shell_flag; /* Control socket */ extern int control_fd; /* * Name of the host we are connecting to. This is the name given on the * command line, or the HostName specified for the user-supplied name in a * configuration file. */ extern char *host; /* * Flag to indicate that we have received a window change signal which has * not yet been processed. This will cause a message indicating the new * window size to be sent to the server a little later. This is volatile * because this is updated in a signal handler. */ static volatile sig_atomic_t received_window_change_signal = 0; static volatile sig_atomic_t received_signal = 0; /* Flag indicating whether the user's terminal is in non-blocking mode. */ static int in_non_blocking_mode = 0; /* Common data for the client loop code. */ static volatile sig_atomic_t quit_pending; /* Set non-zero to quit the loop. */ static int escape_char; /* Escape character. */ static int escape_pending; /* Last character was the escape character */ static int last_was_cr; /* Last character was a newline. */ static int exit_status; /* Used to store the exit status of the command. */ static int stdin_eof; /* EOF has been encountered on standard error. */ static Buffer stdin_buffer; /* Buffer for stdin data. */ static Buffer stdout_buffer; /* Buffer for stdout data. */ static Buffer stderr_buffer; /* Buffer for stderr data. */ static u_long stdin_bytes, stdout_bytes, stderr_bytes; static u_int buffer_high;/* Soft max buffer size. */ static int connection_in; /* Connection to server (input). */ static int connection_out; /* Connection to server (output). */ static int need_rekeying; /* Set to non-zero if rekeying is requested. */ static int session_closed = 0; /* In SSH2: login session closed. */ static int server_alive_timeouts = 0; static void client_init_dispatch(void); int session_ident = -1; struct confirm_ctx { int want_tty; int want_subsys; int want_x_fwd; int want_agent_fwd; Buffer cmd; char *term; struct termios tio; char **env; }; /*XXX*/ extern Kex *xxx_kex; void ssh_process_session2_setup(int, int, int, Buffer *); /* Restores stdin to blocking mode. */ static void leave_non_blocking(void) { if (in_non_blocking_mode) { unset_nonblock(fileno(stdin)); in_non_blocking_mode = 0; } } /* Puts stdin terminal in non-blocking mode. */ static void enter_non_blocking(void) { in_non_blocking_mode = 1; set_nonblock(fileno(stdin)); } /* * Signal handler for the window change signal (SIGWINCH). This just sets a * flag indicating that the window has changed. */ /*ARGSUSED */ static void window_change_handler(int sig) { received_window_change_signal = 1; signal(SIGWINCH, window_change_handler); } /* * Signal handler for signals that cause the program to terminate. These * signals must be trapped to restore terminal modes. */ /*ARGSUSED */ static void signal_handler(int sig) { received_signal = sig; quit_pending = 1; } /* * Returns current time in seconds from Jan 1, 1970 with the maximum * available resolution. */ static double get_current_time(void) { struct timeval tv; gettimeofday(&tv, NULL); return (double) tv.tv_sec + (double) tv.tv_usec / 1000000.0; } #define SSH_X11_PROTO "MIT-MAGIC-COOKIE-1" void client_x11_get_proto(const char *display, const char *xauth_path, u_int trusted, char **_proto, char **_data) { char cmd[1024]; char line[512]; char xdisplay[512]; static char proto[512], data[512]; FILE *f; int got_data = 0, generated = 0, do_unlink = 0, i; char *xauthdir, *xauthfile; struct stat st; xauthdir = xauthfile = NULL; *_proto = proto; *_data = data; proto[0] = data[0] = '\0'; if (xauth_path == NULL ||(stat(xauth_path, &st) == -1)) { debug("No xauth program."); } else { if (display == NULL) { debug("x11_get_proto: DISPLAY not set"); return; } /* * Handle FamilyLocal case where $DISPLAY does * not match an authorization entry. For this we * just try "xauth list unix:displaynum.screennum". * XXX: "localhost" match to determine FamilyLocal * is not perfect. */ if (strncmp(display, "localhost:", 10) == 0) { snprintf(xdisplay, sizeof(xdisplay), "unix:%s", display + 10); display = xdisplay; } if (trusted == 0) { xauthdir = xmalloc(MAXPATHLEN); xauthfile = xmalloc(MAXPATHLEN); strlcpy(xauthdir, "/tmp/ssh-XXXXXXXXXX", MAXPATHLEN); if (mkdtemp(xauthdir) != NULL) { do_unlink = 1; snprintf(xauthfile, MAXPATHLEN, "%s/xauthfile", xauthdir); snprintf(cmd, sizeof(cmd), "%s -f %s generate %s " SSH_X11_PROTO " untrusted timeout 1200 2>" _PATH_DEVNULL, xauth_path, xauthfile, display); debug2("x11_get_proto: %s", cmd); if (system(cmd) == 0) generated = 1; } } snprintf(cmd, sizeof(cmd), "%s %s%s list %s 2>" _PATH_DEVNULL, xauth_path, generated ? "-f " : "" , generated ? xauthfile : "", display); debug2("x11_get_proto: %s", cmd); f = popen(cmd, "r"); if (f && fgets(line, sizeof(line), f) && sscanf(line, "%*s %511s %511s", proto, data) == 2) got_data = 1; if (f) pclose(f); } if (do_unlink) { unlink(xauthfile); rmdir(xauthdir); } if (xauthdir) xfree(xauthdir); if (xauthfile) xfree(xauthfile); /* * If we didn't get authentication data, just make up some * data. The forwarding code will check the validity of the * response anyway, and substitute this data. The X11 * server, however, will ignore this fake data and use * whatever authentication mechanisms it was using otherwise * for the local connection. */ if (!got_data) { u_int32_t rnd = 0; logit("Warning: No xauth data; " "using fake authentication data for X11 forwarding."); strlcpy(proto, SSH_X11_PROTO, sizeof proto); for (i = 0; i < 16; i++) { if (i % 4 == 0) rnd = arc4random(); snprintf(data + 2 * i, sizeof data - 2 * i, "%02x", rnd & 0xff); rnd >>= 8; } } } /* * This is called when the interactive is entered. This checks if there is * an EOF coming on stdin. We must check this explicitly, as select() does * not appear to wake up when redirecting from /dev/null. */ static void client_check_initial_eof_on_stdin(void) { int len; char buf[1]; /* * If standard input is to be "redirected from /dev/null", we simply * mark that we have seen an EOF and send an EOF message to the * server. Otherwise, we try to read a single character; it appears * that for some files, such /dev/null, select() never wakes up for * read for this descriptor, which means that we never get EOF. This * way we will get the EOF if stdin comes from /dev/null or similar. */ if (stdin_null_flag) { /* Fake EOF on stdin. */ debug("Sending eof."); stdin_eof = 1; packet_start(SSH_CMSG_EOF); packet_send(); } else { enter_non_blocking(); /* Check for immediate EOF on stdin. */ len = read(fileno(stdin), buf, 1); if (len == 0) { /* EOF. Record that we have seen it and send EOF to server. */ debug("Sending eof."); stdin_eof = 1; packet_start(SSH_CMSG_EOF); packet_send(); } else if (len > 0) { /* * Got data. We must store the data in the buffer, * and also process it as an escape character if * appropriate. */ if ((u_char) buf[0] == escape_char) escape_pending = 1; else buffer_append(&stdin_buffer, buf, 1); } leave_non_blocking(); } } /* * Make packets from buffered stdin data, and buffer them for sending to the * connection. */ static void client_make_packets_from_stdin_data(void) { u_int len; /* Send buffered stdin data to the server. */ while (buffer_len(&stdin_buffer) > 0 && packet_not_very_much_data_to_write()) { len = buffer_len(&stdin_buffer); /* Keep the packets at reasonable size. */ if (len > packet_get_maxsize()) len = packet_get_maxsize(); packet_start(SSH_CMSG_STDIN_DATA); packet_put_string(buffer_ptr(&stdin_buffer), len); packet_send(); buffer_consume(&stdin_buffer, len); stdin_bytes += len; /* If we have a pending EOF, send it now. */ if (stdin_eof && buffer_len(&stdin_buffer) == 0) { packet_start(SSH_CMSG_EOF); packet_send(); } } } /* * Checks if the client window has changed, and sends a packet about it to * the server if so. The actual change is detected elsewhere (by a software * interrupt on Unix); this just checks the flag and sends a message if * appropriate. */ static void client_check_window_change(void) { struct winsize ws; if (! received_window_change_signal) return; /** XXX race */ received_window_change_signal = 0; debug2("client_check_window_change: changed"); if (compat20) { channel_send_window_changes(); } else { if (ioctl(fileno(stdin), TIOCGWINSZ, &ws) < 0) return; packet_start(SSH_CMSG_WINDOW_SIZE); packet_put_int((u_int)ws.ws_row); packet_put_int((u_int)ws.ws_col); packet_put_int((u_int)ws.ws_xpixel); packet_put_int((u_int)ws.ws_ypixel); packet_send(); } } static void client_global_request_reply(int type, u_int32_t seq, void *ctxt) { server_alive_timeouts = 0; client_global_request_reply_fwd(type, seq, ctxt); } static void server_alive_check(void) { if (++server_alive_timeouts > options.server_alive_count_max) { logit("Timeout, server not responding."); cleanup_exit(255); } packet_start(SSH2_MSG_GLOBAL_REQUEST); packet_put_cstring("keepalive@openssh.com"); packet_put_char(1); /* boolean: want reply */ packet_send(); } /* * Waits until the client can do something (some data becomes available on * one of the file descriptors). */ static void client_wait_until_can_do_something(fd_set **readsetp, fd_set **writesetp, int *maxfdp, u_int *nallocp, int rekeying) { struct timeval tv, *tvp; int ret; /* Add any selections by the channel mechanism. */ channel_prepare_select(readsetp, writesetp, maxfdp, nallocp, rekeying); if (!compat20) { /* Read from the connection, unless our buffers are full. */ if (buffer_len(&stdout_buffer) < buffer_high && buffer_len(&stderr_buffer) < buffer_high && channel_not_very_much_buffered_data()) FD_SET(connection_in, *readsetp); /* * Read from stdin, unless we have seen EOF or have very much * buffered data to send to the server. */ if (!stdin_eof && packet_not_very_much_data_to_write()) FD_SET(fileno(stdin), *readsetp); /* Select stdout/stderr if have data in buffer. */ if (buffer_len(&stdout_buffer) > 0) FD_SET(fileno(stdout), *writesetp); if (buffer_len(&stderr_buffer) > 0) FD_SET(fileno(stderr), *writesetp); } else { /* channel_prepare_select could have closed the last channel */ if (session_closed && !channel_still_open() && !packet_have_data_to_write()) { /* clear mask since we did not call select() */ memset(*readsetp, 0, *nallocp); memset(*writesetp, 0, *nallocp); return; } else { FD_SET(connection_in, *readsetp); } } /* Select server connection if have data to write to the server. */ if (packet_have_data_to_write()) FD_SET(connection_out, *writesetp); if (control_fd != -1) FD_SET(control_fd, *readsetp); /* * Wait for something to happen. This will suspend the process until * some selected descriptor can be read, written, or has some other * event pending. */ if (options.server_alive_interval == 0 || !compat20) tvp = NULL; else { tv.tv_sec = options.server_alive_interval; tv.tv_usec = 0; tvp = &tv; } ret = select((*maxfdp)+1, *readsetp, *writesetp, NULL, tvp); if (ret < 0) { char buf[100]; /* * We have to clear the select masks, because we return. * We have to return, because the mainloop checks for the flags * set by the signal handlers. */ memset(*readsetp, 0, *nallocp); memset(*writesetp, 0, *nallocp); if (errno == EINTR) return; /* Note: we might still have data in the buffers. */ snprintf(buf, sizeof buf, "select: %s\r\n", strerror(errno)); buffer_append(&stderr_buffer, buf, strlen(buf)); quit_pending = 1; } else if (ret == 0) server_alive_check(); } static void client_suspend_self(Buffer *bin, Buffer *bout, Buffer *berr) { /* Flush stdout and stderr buffers. */ if (buffer_len(bout) > 0) atomicio(vwrite, fileno(stdout), buffer_ptr(bout), buffer_len(bout)); if (buffer_len(berr) > 0) atomicio(vwrite, fileno(stderr), buffer_ptr(berr), buffer_len(berr)); leave_raw_mode(); /* * Free (and clear) the buffer to reduce the amount of data that gets * written to swap. */ buffer_free(bin); buffer_free(bout); buffer_free(berr); /* Send the suspend signal to the program itself. */ kill(getpid(), SIGTSTP); /* Reset window sizes in case they have changed */ received_window_change_signal = 1; /* OK, we have been continued by the user. Reinitialize buffers. */ buffer_init(bin); buffer_init(bout); buffer_init(berr); enter_raw_mode(); } static void client_process_net_input(fd_set *readset) { int len; char buf[8192]; /* * Read input from the server, and add any such data to the buffer of * the packet subsystem. */ if (FD_ISSET(connection_in, readset)) { /* Read as much as possible. */ len = read(connection_in, buf, sizeof(buf)); if (len == 0) { /* Received EOF. The remote host has closed the connection. */ snprintf(buf, sizeof buf, "Connection to %.300s closed by remote host.\r\n", host); buffer_append(&stderr_buffer, buf, strlen(buf)); quit_pending = 1; return; } /* * There is a kernel bug on Solaris that causes select to * sometimes wake up even though there is no data available. */ if (len < 0 && (errno == EAGAIN || errno == EINTR)) len = 0; if (len < 0) { /* An error has encountered. Perhaps there is a network problem. */ snprintf(buf, sizeof buf, "Read from remote host %.300s: %.100s\r\n", host, strerror(errno)); buffer_append(&stderr_buffer, buf, strlen(buf)); quit_pending = 1; return; } packet_process_incoming(buf, len); } } static void client_subsystem_reply(int type, u_int32_t seq, void *ctxt) { int id; Channel *c; id = packet_get_int(); packet_check_eom(); if ((c = channel_lookup(id)) == NULL) { error("%s: no channel for id %d", __func__, id); return; } if (type == SSH2_MSG_CHANNEL_SUCCESS) debug2("Request suceeded on channel %d", id); else if (type == SSH2_MSG_CHANNEL_FAILURE) { error("Request failed on channel %d", id); channel_free(c); } } static void client_extra_session2_setup(int id, void *arg) { struct confirm_ctx *cctx = arg; const char *display; Channel *c; int i; if (cctx == NULL) fatal("%s: cctx == NULL", __func__); if ((c = channel_lookup(id)) == NULL) fatal("%s: no channel for id %d", __func__, id); display = getenv("DISPLAY"); if (cctx->want_x_fwd && options.forward_x11 && display != NULL) { char *proto, *data; /* Get reasonable local authentication information. */ client_x11_get_proto(display, options.xauth_location, options.forward_x11_trusted, &proto, &data); /* Request forwarding with authentication spoofing. */ debug("Requesting X11 forwarding with authentication spoofing."); x11_request_forwarding_with_spoofing(id, display, proto, data); /* XXX wait for reply */ } if (cctx->want_agent_fwd && options.forward_agent) { debug("Requesting authentication agent forwarding."); channel_request_start(id, "auth-agent-req@openssh.com", 0); packet_send(); } client_session2_setup(id, cctx->want_tty, cctx->want_subsys, cctx->term, &cctx->tio, c->rfd, &cctx->cmd, cctx->env, client_subsystem_reply); c->confirm_ctx = NULL; buffer_free(&cctx->cmd); xfree(cctx->term); if (cctx->env != NULL) { for (i = 0; cctx->env[i] != NULL; i++) xfree(cctx->env[i]); xfree(cctx->env); } xfree(cctx); } static void client_process_control(fd_set *readset) { Buffer m; Channel *c; int client_fd, new_fd[3], ver, allowed; socklen_t addrlen; struct sockaddr_storage addr; struct confirm_ctx *cctx; char *cmd; u_int i, len, env_len, command, flags; uid_t euid; gid_t egid; /* * Accept connection on control socket */ if (control_fd == -1 || !FD_ISSET(control_fd, readset)) return; memset(&addr, 0, sizeof(addr)); addrlen = sizeof(addr); if ((client_fd = accept(control_fd, (struct sockaddr*)&addr, &addrlen)) == -1) { error("%s accept: %s", __func__, strerror(errno)); return; } if (getpeereid(client_fd, &euid, &egid) < 0) { error("%s getpeereid failed: %s", __func__, strerror(errno)); close(client_fd); return; } if ((euid != 0) && (getuid() != euid)) { error("control mode uid mismatch: peer euid %u != uid %u", (u_int) euid, (u_int) getuid()); close(client_fd); return; } unset_nonblock(client_fd); /* Read command */ buffer_init(&m); if (ssh_msg_recv(client_fd, &m) == -1) { error("%s: client msg_recv failed", __func__); close(client_fd); buffer_free(&m); return; } if ((ver = buffer_get_char(&m)) != SSHMUX_VER) { error("%s: wrong client version %d", __func__, ver); buffer_free(&m); close(client_fd); return; } allowed = 1; command = buffer_get_int(&m); flags = buffer_get_int(&m); buffer_clear(&m); switch (command) { case SSHMUX_COMMAND_OPEN: if (options.control_master == SSHCTL_MASTER_ASK || options.control_master == SSHCTL_MASTER_AUTO_ASK) allowed = ask_permission("Allow shared connection " "to %s? ", host); /* continue below */ break; case SSHMUX_COMMAND_TERMINATE: if (options.control_master == SSHCTL_MASTER_ASK || options.control_master == SSHCTL_MASTER_AUTO_ASK) allowed = ask_permission("Terminate shared connection " "to %s? ", host); if (allowed) quit_pending = 1; /* FALLTHROUGH */ case SSHMUX_COMMAND_ALIVE_CHECK: /* Reply for SSHMUX_COMMAND_TERMINATE and ALIVE_CHECK */ buffer_clear(&m); buffer_put_int(&m, allowed); buffer_put_int(&m, getpid()); if (ssh_msg_send(client_fd, SSHMUX_VER, &m) == -1) { error("%s: client msg_send failed", __func__); close(client_fd); buffer_free(&m); return; } buffer_free(&m); close(client_fd); return; default: error("Unsupported command %d", command); buffer_free(&m); close(client_fd); return; } /* Reply for SSHMUX_COMMAND_OPEN */ buffer_clear(&m); buffer_put_int(&m, allowed); buffer_put_int(&m, getpid()); if (ssh_msg_send(client_fd, SSHMUX_VER, &m) == -1) { error("%s: client msg_send failed", __func__); close(client_fd); buffer_free(&m); return; } if (!allowed) { error("Refused control connection"); close(client_fd); buffer_free(&m); return; } buffer_clear(&m); if (ssh_msg_recv(client_fd, &m) == -1) { error("%s: client msg_recv failed", __func__); close(client_fd); buffer_free(&m); return; } if ((ver = buffer_get_char(&m)) != SSHMUX_VER) { error("%s: wrong client version %d", __func__, ver); buffer_free(&m); close(client_fd); return; } cctx = xcalloc(1, sizeof(*cctx)); cctx->want_tty = (flags & SSHMUX_FLAG_TTY) != 0; cctx->want_subsys = (flags & SSHMUX_FLAG_SUBSYS) != 0; cctx->want_x_fwd = (flags & SSHMUX_FLAG_X11_FWD) != 0; cctx->want_agent_fwd = (flags & SSHMUX_FLAG_AGENT_FWD) != 0; cctx->term = buffer_get_string(&m, &len); cmd = buffer_get_string(&m, &len); buffer_init(&cctx->cmd); buffer_append(&cctx->cmd, cmd, strlen(cmd)); env_len = buffer_get_int(&m); env_len = MIN(env_len, 4096); debug3("%s: receiving %d env vars", __func__, env_len); if (env_len != 0) { cctx->env = xcalloc(env_len + 1, sizeof(*cctx->env)); for (i = 0; i < env_len; i++) cctx->env[i] = buffer_get_string(&m, &len); cctx->env[i] = NULL; } debug2("%s: accepted tty %d, subsys %d, cmd %s", __func__, cctx->want_tty, cctx->want_subsys, cmd); xfree(cmd); /* Gather fds from client */ new_fd[0] = mm_receive_fd(client_fd); new_fd[1] = mm_receive_fd(client_fd); new_fd[2] = mm_receive_fd(client_fd); debug2("%s: got fds stdin %d, stdout %d, stderr %d", __func__, new_fd[0], new_fd[1], new_fd[2]); /* Try to pick up ttymodes from client before it goes raw */ if (cctx->want_tty && tcgetattr(new_fd[0], &cctx->tio) == -1) error("%s: tcgetattr: %s", __func__, strerror(errno)); /* This roundtrip is just for synchronisation of ttymodes */ buffer_clear(&m); if (ssh_msg_send(client_fd, SSHMUX_VER, &m) == -1) { error("%s: client msg_send failed", __func__); close(client_fd); close(new_fd[0]); close(new_fd[1]); close(new_fd[2]); buffer_free(&m); xfree(cctx->term); if (env_len != 0) { for (i = 0; i < env_len; i++) xfree(cctx->env[i]); xfree(cctx->env); } return; } buffer_free(&m); /* enable nonblocking unless tty */ if (!isatty(new_fd[0])) set_nonblock(new_fd[0]); if (!isatty(new_fd[1])) set_nonblock(new_fd[1]); if (!isatty(new_fd[2])) set_nonblock(new_fd[2]); set_nonblock(client_fd); c = channel_new("session", SSH_CHANNEL_OPENING, new_fd[0], new_fd[1], new_fd[2], CHAN_SES_WINDOW_DEFAULT, CHAN_SES_PACKET_DEFAULT, CHAN_EXTENDED_WRITE, "client-session", /*nonblock*/0); /* XXX */ c->ctl_fd = client_fd; debug3("%s: channel_new: %d", __func__, c->self); channel_send_open(c->self); channel_register_confirm(c->self, client_extra_session2_setup, cctx); } static void process_cmdline(void) { void (*handler)(int); char *s, *cmd, *cancel_host; int delete = 0; int local = 0; u_short cancel_port; Forward fwd; leave_raw_mode(); handler = signal(SIGINT, SIG_IGN); cmd = s = read_passphrase("\r\nssh> ", RP_ECHO); if (s == NULL) goto out; while (*s && isspace(*s)) s++; if (*s == '-') s++; /* Skip cmdline '-', if any */ if (*s == '\0') goto out; if (*s == 'h' || *s == 'H' || *s == '?') { logit("Commands:"); logit(" -L[bind_address:]port:host:hostport " "Request local forward"); logit(" -R[bind_address:]port:host:hostport " "Request remote forward"); logit(" -KR[bind_address:]port " "Cancel remote forward"); if (!options.permit_local_command) goto out; logit(" !args " "Execute local command"); goto out; } if (*s == '!' && options.permit_local_command) { s++; ssh_local_cmd(s); goto out; } if (*s == 'K') { delete = 1; s++; } if (*s != 'L' && *s != 'R') { logit("Invalid command."); goto out; } if (*s == 'L') local = 1; if (local && delete) { logit("Not supported."); goto out; } if ((!local || delete) && !compat20) { logit("Not supported for SSH protocol version 1."); goto out; } s++; while (*s && isspace(*s)) s++; if (delete) { cancel_port = 0; cancel_host = hpdelim(&s); /* may be NULL */ if (s != NULL) { cancel_port = a2port(s); cancel_host = cleanhostname(cancel_host); } else { cancel_port = a2port(cancel_host); cancel_host = NULL; } if (cancel_port == 0) { logit("Bad forwarding close port"); goto out; } channel_request_rforward_cancel(cancel_host, cancel_port); } else { if (!parse_forward(&fwd, s)) { logit("Bad forwarding specification."); goto out; } if (local) { if (channel_setup_local_fwd_listener(fwd.listen_host, fwd.listen_port, fwd.connect_host, fwd.connect_port, options.gateway_ports) < 0) { logit("Port forwarding failed."); goto out; } } else { if (channel_request_remote_forwarding(fwd.listen_host, fwd.listen_port, fwd.connect_host, fwd.connect_port) < 0) { logit("Port forwarding failed."); goto out; } } logit("Forwarding port."); } out: signal(SIGINT, handler); enter_raw_mode(); if (cmd) xfree(cmd); } /* process the characters one by one */ static int process_escapes(Buffer *bin, Buffer *bout, Buffer *berr, char *buf, int len) { char string[1024]; pid_t pid; int bytes = 0; u_int i; u_char ch; char *s; if (len <= 0) return (0); for (i = 0; i < (u_int)len; i++) { /* Get one character at a time. */ ch = buf[i]; if (escape_pending) { /* We have previously seen an escape character. */ /* Clear the flag now. */ escape_pending = 0; /* Process the escaped character. */ switch (ch) { case '.': /* Terminate the connection. */ snprintf(string, sizeof string, "%c.\r\n", escape_char); buffer_append(berr, string, strlen(string)); quit_pending = 1; return -1; case 'Z' - 64: /* Suspend the program. */ /* Print a message to that effect to the user. */ snprintf(string, sizeof string, "%c^Z [suspend ssh]\r\n", escape_char); buffer_append(berr, string, strlen(string)); /* Restore terminal modes and suspend. */ client_suspend_self(bin, bout, berr); /* We have been continued. */ continue; case 'B': if (compat20) { snprintf(string, sizeof string, "%cB\r\n", escape_char); buffer_append(berr, string, strlen(string)); channel_request_start(session_ident, "break", 0); packet_put_int(1000); packet_send(); } continue; case 'R': if (compat20) { if (datafellows & SSH_BUG_NOREKEY) logit("Server does not support re-keying"); else need_rekeying = 1; } continue; case '&': /* * Detach the program (continue to serve connections, * but put in background and no more new connections). */ /* Restore tty modes. */ leave_raw_mode(); /* Stop listening for new connections. */ channel_stop_listening(); snprintf(string, sizeof string, "%c& [backgrounded]\n", escape_char); buffer_append(berr, string, strlen(string)); /* Fork into background. */ pid = fork(); if (pid < 0) { error("fork: %.100s", strerror(errno)); continue; } if (pid != 0) { /* This is the parent. */ /* The parent just exits. */ exit(0); } /* The child continues serving connections. */ if (compat20) { buffer_append(bin, "\004", 1); /* fake EOF on stdin */ return -1; } else if (!stdin_eof) { /* * Sending SSH_CMSG_EOF alone does not always appear * to be enough. So we try to send an EOF character * first. */ packet_start(SSH_CMSG_STDIN_DATA); packet_put_string("\004", 1); packet_send(); /* Close stdin. */ stdin_eof = 1; if (buffer_len(bin) == 0) { packet_start(SSH_CMSG_EOF); packet_send(); } } continue; case '?': snprintf(string, sizeof string, "%c?\r\n\ Supported escape sequences:\r\n\ %c. - terminate connection\r\n\ %cB - send a BREAK to the remote system\r\n\ %cC - open a command line\r\n\ %cR - Request rekey (SSH protocol 2 only)\r\n\ %c^Z - suspend ssh\r\n\ %c# - list forwarded connections\r\n\ %c& - background ssh (when waiting for connections to terminate)\r\n\ %c? - this message\r\n\ %c%c - send the escape character by typing it twice\r\n\ (Note that escapes are only recognized immediately after newline.)\r\n", escape_char, escape_char, escape_char, escape_char, escape_char, escape_char, escape_char, escape_char, escape_char, escape_char, escape_char); buffer_append(berr, string, strlen(string)); continue; case '#': snprintf(string, sizeof string, "%c#\r\n", escape_char); buffer_append(berr, string, strlen(string)); s = channel_open_message(); buffer_append(berr, s, strlen(s)); xfree(s); continue; case 'C': process_cmdline(); continue; default: if (ch != escape_char) { buffer_put_char(bin, escape_char); bytes++; } /* Escaped characters fall through here */ break; } } else { /* * The previous character was not an escape char. Check if this * is an escape. */ if (last_was_cr && ch == escape_char) { /* It is. Set the flag and continue to next character. */ escape_pending = 1; continue; } } /* * Normal character. Record whether it was a newline, * and append it to the buffer. */ last_was_cr = (ch == '\r' || ch == '\n'); buffer_put_char(bin, ch); bytes++; } return bytes; } static void client_process_input(fd_set *readset) { int len; char buf[8192]; /* Read input from stdin. */ if (FD_ISSET(fileno(stdin), readset)) { /* Read as much as possible. */ len = read(fileno(stdin), buf, sizeof(buf)); if (len < 0 && (errno == EAGAIN || errno == EINTR)) return; /* we'll try again later */ if (len <= 0) { /* * Received EOF or error. They are treated * similarly, except that an error message is printed * if it was an error condition. */ if (len < 0) { snprintf(buf, sizeof buf, "read: %.100s\r\n", strerror(errno)); buffer_append(&stderr_buffer, buf, strlen(buf)); } /* Mark that we have seen EOF. */ stdin_eof = 1; /* * Send an EOF message to the server unless there is * data in the buffer. If there is data in the * buffer, no message will be sent now. Code * elsewhere will send the EOF when the buffer * becomes empty if stdin_eof is set. */ if (buffer_len(&stdin_buffer) == 0) { packet_start(SSH_CMSG_EOF); packet_send(); } } else if (escape_char == SSH_ESCAPECHAR_NONE) { /* * Normal successful read, and no escape character. * Just append the data to buffer. */ buffer_append(&stdin_buffer, buf, len); } else { /* * Normal, successful read. But we have an escape character * and have to process the characters one by one. */ if (process_escapes(&stdin_buffer, &stdout_buffer, &stderr_buffer, buf, len) == -1) return; } } } static void client_process_output(fd_set *writeset) { int len; char buf[100]; /* Write buffered output to stdout. */ if (FD_ISSET(fileno(stdout), writeset)) { /* Write as much data as possible. */ len = write(fileno(stdout), buffer_ptr(&stdout_buffer), buffer_len(&stdout_buffer)); if (len <= 0) { if (errno == EINTR || errno == EAGAIN) len = 0; else { /* * An error or EOF was encountered. Put an * error message to stderr buffer. */ snprintf(buf, sizeof buf, "write stdout: %.50s\r\n", strerror(errno)); buffer_append(&stderr_buffer, buf, strlen(buf)); quit_pending = 1; return; } } /* Consume printed data from the buffer. */ buffer_consume(&stdout_buffer, len); stdout_bytes += len; } /* Write buffered output to stderr. */ if (FD_ISSET(fileno(stderr), writeset)) { /* Write as much data as possible. */ len = write(fileno(stderr), buffer_ptr(&stderr_buffer), buffer_len(&stderr_buffer)); if (len <= 0) { if (errno == EINTR || errno == EAGAIN) len = 0; else { /* EOF or error, but can't even print error message. */ quit_pending = 1; return; } } /* Consume printed characters from the buffer. */ buffer_consume(&stderr_buffer, len); stderr_bytes += len; } } /* * Get packets from the connection input buffer, and process them as long as * there are packets available. * * Any unknown packets received during the actual * session cause the session to terminate. This is * intended to make debugging easier since no * confirmations are sent. Any compatible protocol * extensions must be negotiated during the * preparatory phase. */ static void client_process_buffered_input_packets(void) { dispatch_run(DISPATCH_NONBLOCK, &quit_pending, compat20 ? xxx_kex : NULL); } /* scan buf[] for '~' before sending data to the peer */ static int simple_escape_filter(Channel *c, char *buf, int len) { /* XXX we assume c->extended is writeable */ return process_escapes(&c->input, &c->output, &c->extended, buf, len); } static void client_channel_closed(int id, void *arg) { channel_cancel_cleanup(id); session_closed = 1; leave_raw_mode(); } /* * Implements the interactive session with the server. This is called after * the user has been authenticated, and a command has been started on the * remote host. If escape_char != SSH_ESCAPECHAR_NONE, it is the character * used as an escape character for terminating or suspending the session. */ int client_loop(int have_pty, int escape_char_arg, int ssh2_chan_id) { fd_set *readset = NULL, *writeset = NULL; double start_time, total_time; int max_fd = 0, max_fd2 = 0, len, rekeying = 0; u_int nalloc = 0; char buf[100]; debug("Entering interactive session."); start_time = get_current_time(); /* Initialize variables. */ escape_pending = 0; last_was_cr = 1; exit_status = -1; stdin_eof = 0; buffer_high = 64 * 1024; connection_in = packet_get_connection_in(); connection_out = packet_get_connection_out(); max_fd = MAX(connection_in, connection_out); if (control_fd != -1) max_fd = MAX(max_fd, control_fd); if (!compat20) { /* enable nonblocking unless tty */ if (!isatty(fileno(stdin))) set_nonblock(fileno(stdin)); if (!isatty(fileno(stdout))) set_nonblock(fileno(stdout)); if (!isatty(fileno(stderr))) set_nonblock(fileno(stderr)); max_fd = MAX(max_fd, fileno(stdin)); max_fd = MAX(max_fd, fileno(stdout)); max_fd = MAX(max_fd, fileno(stderr)); } stdin_bytes = 0; stdout_bytes = 0; stderr_bytes = 0; quit_pending = 0; escape_char = escape_char_arg; /* Initialize buffers. */ buffer_init(&stdin_buffer); buffer_init(&stdout_buffer); buffer_init(&stderr_buffer); client_init_dispatch(); /* * Set signal handlers, (e.g. to restore non-blocking mode) * but don't overwrite SIG_IGN, matches behaviour from rsh(1) */ if (signal(SIGHUP, SIG_IGN) != SIG_IGN) signal(SIGHUP, signal_handler); if (signal(SIGINT, SIG_IGN) != SIG_IGN) signal(SIGINT, signal_handler); if (signal(SIGQUIT, SIG_IGN) != SIG_IGN) signal(SIGQUIT, signal_handler); if (signal(SIGTERM, SIG_IGN) != SIG_IGN) signal(SIGTERM, signal_handler); signal(SIGWINCH, window_change_handler); if (have_pty) enter_raw_mode(); if (compat20) { session_ident = ssh2_chan_id; if (escape_char != SSH_ESCAPECHAR_NONE) channel_register_filter(session_ident, simple_escape_filter, NULL); if (session_ident != -1) channel_register_cleanup(session_ident, client_channel_closed, 0); } else { /* Check if we should immediately send eof on stdin. */ client_check_initial_eof_on_stdin(); } /* Main loop of the client for the interactive session mode. */ while (!quit_pending) { /* Process buffered packets sent by the server. */ client_process_buffered_input_packets(); if (compat20 && session_closed && !channel_still_open()) break; rekeying = (xxx_kex != NULL && !xxx_kex->done); if (rekeying) { debug("rekeying in progress"); } else { /* * Make packets of buffered stdin data, and buffer * them for sending to the server. */ if (!compat20) client_make_packets_from_stdin_data(); /* * Make packets from buffered channel data, and * enqueue them for sending to the server. */ if (packet_not_very_much_data_to_write()) channel_output_poll(); /* * Check if the window size has changed, and buffer a * message about it to the server if so. */ client_check_window_change(); if (quit_pending) break; } /* * Wait until we have something to do (something becomes * available on one of the descriptors). */ max_fd2 = max_fd; client_wait_until_can_do_something(&readset, &writeset, &max_fd2, &nalloc, rekeying); if (quit_pending) break; /* Do channel operations unless rekeying in progress. */ if (!rekeying) { channel_after_select(readset, writeset); if (need_rekeying || packet_need_rekeying()) { debug("need rekeying"); xxx_kex->done = 0; kex_send_kexinit(xxx_kex); need_rekeying = 0; } } /* Buffer input from the connection. */ client_process_net_input(readset); /* Accept control connections. */ client_process_control(readset); if (quit_pending) break; if (!compat20) { /* Buffer data from stdin */ client_process_input(readset); /* * Process output to stdout and stderr. Output to * the connection is processed elsewhere (above). */ client_process_output(writeset); } /* Send as much buffered packet data as possible to the sender. */ if (FD_ISSET(connection_out, writeset)) packet_write_poll(); } if (readset) xfree(readset); if (writeset) xfree(writeset); /* Terminate the session. */ /* Stop watching for window change. */ signal(SIGWINCH, SIG_DFL); channel_free_all(); if (have_pty) leave_raw_mode(); /* restore blocking io */ if (!isatty(fileno(stdin))) unset_nonblock(fileno(stdin)); if (!isatty(fileno(stdout))) unset_nonblock(fileno(stdout)); if (!isatty(fileno(stderr))) unset_nonblock(fileno(stderr)); /* * If there was no shell or command requested, there will be no remote * exit status to be returned. In that case, clear error code if the * connection was deliberately terminated at this end. */ if (no_shell_flag && received_signal == SIGTERM) { received_signal = 0; exit_status = 0; } if (received_signal) fatal("Killed by signal %d.", (int) received_signal); /* * In interactive mode (with pseudo tty) display a message indicating * that the connection has been closed. */ if (have_pty && options.log_level != SYSLOG_LEVEL_QUIET) { snprintf(buf, sizeof buf, "Connection to %.64s closed.\r\n", host); buffer_append(&stderr_buffer, buf, strlen(buf)); } /* Output any buffered data for stdout. */ while (buffer_len(&stdout_buffer) > 0) { len = write(fileno(stdout), buffer_ptr(&stdout_buffer), buffer_len(&stdout_buffer)); if (len <= 0) { error("Write failed flushing stdout buffer."); break; } buffer_consume(&stdout_buffer, len); stdout_bytes += len; } /* Output any buffered data for stderr. */ while (buffer_len(&stderr_buffer) > 0) { len = write(fileno(stderr), buffer_ptr(&stderr_buffer), buffer_len(&stderr_buffer)); if (len <= 0) { error("Write failed flushing stderr buffer."); break; } buffer_consume(&stderr_buffer, len); stderr_bytes += len; } /* Clear and free any buffers. */ memset(buf, 0, sizeof(buf)); buffer_free(&stdin_buffer); buffer_free(&stdout_buffer); buffer_free(&stderr_buffer); /* Report bytes transferred, and transfer rates. */ total_time = get_current_time() - start_time; debug("Transferred: stdin %lu, stdout %lu, stderr %lu bytes in %.1f seconds", stdin_bytes, stdout_bytes, stderr_bytes, total_time); if (total_time > 0) debug("Bytes per second: stdin %.1f, stdout %.1f, stderr %.1f", stdin_bytes / total_time, stdout_bytes / total_time, stderr_bytes / total_time); /* Return the exit status of the program. */ debug("Exit status %d", exit_status); return exit_status; } /*********/ static void client_input_stdout_data(int type, u_int32_t seq, void *ctxt) { u_int data_len; char *data = packet_get_string(&data_len); packet_check_eom(); buffer_append(&stdout_buffer, data, data_len); memset(data, 0, data_len); xfree(data); } static void client_input_stderr_data(int type, u_int32_t seq, void *ctxt) { u_int data_len; char *data = packet_get_string(&data_len); packet_check_eom(); buffer_append(&stderr_buffer, data, data_len); memset(data, 0, data_len); xfree(data); } static void client_input_exit_status(int type, u_int32_t seq, void *ctxt) { exit_status = packet_get_int(); packet_check_eom(); /* Acknowledge the exit. */ packet_start(SSH_CMSG_EXIT_CONFIRMATION); packet_send(); /* * Must wait for packet to be sent since we are * exiting the loop. */ packet_write_wait(); /* Flag that we want to exit. */ quit_pending = 1; } static void client_input_agent_open(int type, u_int32_t seq, void *ctxt) { Channel *c = NULL; int remote_id, sock; /* Read the remote channel number from the message. */ remote_id = packet_get_int(); packet_check_eom(); /* * Get a connection to the local authentication agent (this may again * get forwarded). */ sock = ssh_get_authentication_socket(); /* * If we could not connect the agent, send an error message back to * the server. This should never happen unless the agent dies, * because authentication forwarding is only enabled if we have an * agent. */ if (sock >= 0) { c = channel_new("", SSH_CHANNEL_OPEN, sock, sock, -1, 0, 0, 0, "authentication agent connection", 1); c->remote_id = remote_id; c->force_drain = 1; } if (c == NULL) { packet_start(SSH_MSG_CHANNEL_OPEN_FAILURE); packet_put_int(remote_id); } else { /* Send a confirmation to the remote host. */ debug("Forwarding authentication connection."); packet_start(SSH_MSG_CHANNEL_OPEN_CONFIRMATION); packet_put_int(remote_id); packet_put_int(c->self); } packet_send(); } static Channel * client_request_forwarded_tcpip(const char *request_type, int rchan) { Channel *c = NULL; char *listen_address, *originator_address; int listen_port, originator_port; int sock; /* Get rest of the packet */ listen_address = packet_get_string(NULL); listen_port = packet_get_int(); originator_address = packet_get_string(NULL); originator_port = packet_get_int(); packet_check_eom(); debug("client_request_forwarded_tcpip: listen %s port %d, originator %s port %d", listen_address, listen_port, originator_address, originator_port); sock = channel_connect_by_listen_address(listen_port); if (sock < 0) { xfree(originator_address); xfree(listen_address); return NULL; } c = channel_new("forwarded-tcpip", SSH_CHANNEL_CONNECTING, sock, sock, -1, CHAN_TCP_WINDOW_DEFAULT, CHAN_TCP_WINDOW_DEFAULT, 0, originator_address, 1); xfree(originator_address); xfree(listen_address); return c; } static Channel * client_request_x11(const char *request_type, int rchan) { Channel *c = NULL; char *originator; int originator_port; int sock; if (!options.forward_x11) { error("Warning: ssh server tried X11 forwarding."); error("Warning: this is probably a break-in attempt by a malicious server."); return NULL; } originator = packet_get_string(NULL); if (datafellows & SSH_BUG_X11FWD) { debug2("buggy server: x11 request w/o originator_port"); originator_port = 0; } else { originator_port = packet_get_int(); } packet_check_eom(); /* XXX check permission */ debug("client_request_x11: request from %s %d", originator, originator_port); xfree(originator); sock = x11_connect_display(); if (sock < 0) return NULL; c = channel_new("x11", SSH_CHANNEL_X11_OPEN, sock, sock, -1, CHAN_TCP_WINDOW_DEFAULT, CHAN_X11_PACKET_DEFAULT, 0, "x11", 1); c->force_drain = 1; return c; } static Channel * client_request_agent(const char *request_type, int rchan) { Channel *c = NULL; int sock; if (!options.forward_agent) { error("Warning: ssh server tried agent forwarding."); error("Warning: this is probably a break-in attempt by a malicious server."); return NULL; } sock = ssh_get_authentication_socket(); if (sock < 0) return NULL; c = channel_new("authentication agent connection", SSH_CHANNEL_OPEN, sock, sock, -1, CHAN_X11_WINDOW_DEFAULT, CHAN_TCP_WINDOW_DEFAULT, 0, "authentication agent connection", 1); c->force_drain = 1; return c; } /* XXXX move to generic input handler */ static void client_input_channel_open(int type, u_int32_t seq, void *ctxt) { Channel *c = NULL; char *ctype; int rchan; u_int rmaxpack, rwindow, len; ctype = packet_get_string(&len); rchan = packet_get_int(); rwindow = packet_get_int(); rmaxpack = packet_get_int(); debug("client_input_channel_open: ctype %s rchan %d win %d max %d", ctype, rchan, rwindow, rmaxpack); if (strcmp(ctype, "forwarded-tcpip") == 0) { c = client_request_forwarded_tcpip(ctype, rchan); } else if (strcmp(ctype, "x11") == 0) { c = client_request_x11(ctype, rchan); } else if (strcmp(ctype, "auth-agent@openssh.com") == 0) { c = client_request_agent(ctype, rchan); } /* XXX duplicate : */ if (c != NULL) { debug("confirm %s", ctype); c->remote_id = rchan; c->remote_window = rwindow; c->remote_maxpacket = rmaxpack; if (c->type != SSH_CHANNEL_CONNECTING) { packet_start(SSH2_MSG_CHANNEL_OPEN_CONFIRMATION); packet_put_int(c->remote_id); packet_put_int(c->self); packet_put_int(c->local_window); packet_put_int(c->local_maxpacket); packet_send(); } } else { debug("failure %s", ctype); packet_start(SSH2_MSG_CHANNEL_OPEN_FAILURE); packet_put_int(rchan); packet_put_int(SSH2_OPEN_ADMINISTRATIVELY_PROHIBITED); if (!(datafellows & SSH_BUG_OPENFAILURE)) { packet_put_cstring("open failed"); packet_put_cstring(""); } packet_send(); } xfree(ctype); } static void client_input_channel_req(int type, u_int32_t seq, void *ctxt) { Channel *c = NULL; int exitval, id, reply, success = 0; char *rtype; id = packet_get_int(); rtype = packet_get_string(NULL); reply = packet_get_char(); debug("client_input_channel_req: channel %d rtype %s reply %d", id, rtype, reply); if (id == -1) { error("client_input_channel_req: request for channel -1"); } else if ((c = channel_lookup(id)) == NULL) { error("client_input_channel_req: channel %d: unknown channel", id); } else if (strcmp(rtype, "exit-status") == 0) { exitval = packet_get_int(); if (id == session_ident) { success = 1; exit_status = exitval; } else if (c->ctl_fd == -1) { error("client_input_channel_req: unexpected channel %d", session_ident); } else { atomicio(vwrite, c->ctl_fd, &exitval, sizeof(exitval)); success = 1; } packet_check_eom(); } if (reply) { packet_start(success ? SSH2_MSG_CHANNEL_SUCCESS : SSH2_MSG_CHANNEL_FAILURE); packet_put_int(id); packet_send(); } xfree(rtype); } static void client_input_global_request(int type, u_int32_t seq, void *ctxt) { char *rtype; int want_reply; int success = 0; rtype = packet_get_string(NULL); want_reply = packet_get_char(); debug("client_input_global_request: rtype %s want_reply %d", rtype, want_reply); if (want_reply) { packet_start(success ? SSH2_MSG_REQUEST_SUCCESS : SSH2_MSG_REQUEST_FAILURE); packet_send(); packet_write_wait(); } xfree(rtype); } void client_session2_setup(int id, int want_tty, int want_subsystem, const char *term, struct termios *tiop, int in_fd, Buffer *cmd, char **env, dispatch_fn *subsys_repl) { int len; Channel *c = NULL; debug2("%s: id %d", __func__, id); if ((c = channel_lookup(id)) == NULL) fatal("client_session2_setup: channel %d: unknown channel", id); if (want_tty) { struct winsize ws; struct termios tio; /* Store window size in the packet. */ if (ioctl(in_fd, TIOCGWINSZ, &ws) < 0) memset(&ws, 0, sizeof(ws)); channel_request_start(id, "pty-req", 0); packet_put_cstring(term != NULL ? term : ""); packet_put_int((u_int)ws.ws_col); packet_put_int((u_int)ws.ws_row); packet_put_int((u_int)ws.ws_xpixel); packet_put_int((u_int)ws.ws_ypixel); tio = get_saved_tio(); tty_make_modes(-1, tiop != NULL ? tiop : &tio); packet_send(); /* XXX wait for reply */ c->client_tty = 1; } /* Transfer any environment variables from client to server */ if (options.num_send_env != 0 && env != NULL) { int i, j, matched; char *name, *val; debug("Sending environment."); for (i = 0; env[i] != NULL; i++) { /* Split */ name = xstrdup(env[i]); if ((val = strchr(name, '=')) == NULL) { xfree(name); continue; } *val++ = '\0'; matched = 0; for (j = 0; j < options.num_send_env; j++) { if (match_pattern(name, options.send_env[j])) { matched = 1; break; } } if (!matched) { debug3("Ignored env %s", name); xfree(name); continue; } debug("Sending env %s = %s", name, val); channel_request_start(id, "env", 0); packet_put_cstring(name); packet_put_cstring(val); packet_send(); xfree(name); } } len = buffer_len(cmd); if (len > 0) { if (len > 900) len = 900; if (want_subsystem) { debug("Sending subsystem: %.*s", len, (u_char*)buffer_ptr(cmd)); channel_request_start(id, "subsystem", subsys_repl != NULL); if (subsys_repl != NULL) { /* register callback for reply */ /* XXX we assume that client_loop has already been called */ dispatch_set(SSH2_MSG_CHANNEL_FAILURE, subsys_repl); dispatch_set(SSH2_MSG_CHANNEL_SUCCESS, subsys_repl); } } else { debug("Sending command: %.*s", len, (u_char*)buffer_ptr(cmd)); channel_request_start(id, "exec", 0); } packet_put_string(buffer_ptr(cmd), buffer_len(cmd)); packet_send(); } else { channel_request_start(id, "shell", 0); packet_send(); } } static void client_init_dispatch_20(void) { dispatch_init(&dispatch_protocol_error); dispatch_set(SSH2_MSG_CHANNEL_CLOSE, &channel_input_oclose); dispatch_set(SSH2_MSG_CHANNEL_DATA, &channel_input_data); dispatch_set(SSH2_MSG_CHANNEL_EOF, &channel_input_ieof); dispatch_set(SSH2_MSG_CHANNEL_EXTENDED_DATA, &channel_input_extended_data); dispatch_set(SSH2_MSG_CHANNEL_OPEN, &client_input_channel_open); dispatch_set(SSH2_MSG_CHANNEL_OPEN_CONFIRMATION, &channel_input_open_confirmation); dispatch_set(SSH2_MSG_CHANNEL_OPEN_FAILURE, &channel_input_open_failure); dispatch_set(SSH2_MSG_CHANNEL_REQUEST, &client_input_channel_req); dispatch_set(SSH2_MSG_CHANNEL_WINDOW_ADJUST, &channel_input_window_adjust); dispatch_set(SSH2_MSG_GLOBAL_REQUEST, &client_input_global_request); /* rekeying */ dispatch_set(SSH2_MSG_KEXINIT, &kex_input_kexinit); /* global request reply messages */ dispatch_set(SSH2_MSG_REQUEST_FAILURE, &client_global_request_reply); dispatch_set(SSH2_MSG_REQUEST_SUCCESS, &client_global_request_reply); } static void client_init_dispatch_13(void) { dispatch_init(NULL); dispatch_set(SSH_MSG_CHANNEL_CLOSE, &channel_input_close); dispatch_set(SSH_MSG_CHANNEL_CLOSE_CONFIRMATION, &channel_input_close_confirmation); dispatch_set(SSH_MSG_CHANNEL_DATA, &channel_input_data); dispatch_set(SSH_MSG_CHANNEL_OPEN_CONFIRMATION, &channel_input_open_confirmation); dispatch_set(SSH_MSG_CHANNEL_OPEN_FAILURE, &channel_input_open_failure); dispatch_set(SSH_MSG_PORT_OPEN, &channel_input_port_open); dispatch_set(SSH_SMSG_EXITSTATUS, &client_input_exit_status); dispatch_set(SSH_SMSG_STDERR_DATA, &client_input_stderr_data); dispatch_set(SSH_SMSG_STDOUT_DATA, &client_input_stdout_data); dispatch_set(SSH_SMSG_AGENT_OPEN, options.forward_agent ? &client_input_agent_open : &deny_input_open); dispatch_set(SSH_SMSG_X11_OPEN, options.forward_x11 ? &x11_input_open : &deny_input_open); } static void client_init_dispatch_15(void) { client_init_dispatch_13(); dispatch_set(SSH_MSG_CHANNEL_CLOSE, &channel_input_ieof); dispatch_set(SSH_MSG_CHANNEL_CLOSE_CONFIRMATION, & channel_input_oclose); } static void client_init_dispatch(void) { if (compat20) client_init_dispatch_20(); else if (compat13) client_init_dispatch_13(); else client_init_dispatch_15(); } /* client specific fatal cleanup */ void cleanup_exit(int i) { leave_raw_mode(); leave_non_blocking(); if (options.control_path != NULL && control_fd != -1) unlink(options.control_path); _exit(i); }