/* * Author: Tatu Ylonen * Copyright (c) 1995 Tatu Ylonen , Espoo, Finland * All rights reserved * Server main loop for handling the interactive session. * * As far as I am concerned, the code I have written for this software * can be used freely for any purpose. Any derived versions of this * software must be clearly marked as such, and if the derived work is * incompatible with the protocol description in the RFC file, it must be * called by a name other than "ssh" or "Secure Shell". * * SSH2 support by Markus Friedl. * Copyright (c) 2000 Markus Friedl. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ #include "includes.h" RCSID("$OpenBSD: serverloop.c,v 1.69 2001/06/20 13:56:39 markus Exp $"); #include "xmalloc.h" #include "packet.h" #include "buffer.h" #include "log.h" #include "servconf.h" #include "sshpty.h" #include "channels.h" #include "compat.h" #include "ssh1.h" #include "ssh2.h" #include "auth.h" #include "session.h" #include "dispatch.h" #include "auth-options.h" #include "serverloop.h" #include "misc.h" #include "kex.h" extern ServerOptions options; /* XXX */ extern Kex *xxx_kex; static Buffer stdin_buffer; /* Buffer for stdin data. */ static Buffer stdout_buffer; /* Buffer for stdout data. */ static Buffer stderr_buffer; /* Buffer for stderr data. */ static int fdin; /* Descriptor for stdin (for writing) */ static int fdout; /* Descriptor for stdout (for reading); May be same number as fdin. */ static int fderr; /* Descriptor for stderr. May be -1. */ static long stdin_bytes = 0; /* Number of bytes written to stdin. */ static long stdout_bytes = 0; /* Number of stdout bytes sent to client. */ static long stderr_bytes = 0; /* Number of stderr bytes sent to client. */ static long fdout_bytes = 0; /* Number of stdout bytes read from program. */ static int stdin_eof = 0; /* EOF message received from client. */ static int fdout_eof = 0; /* EOF encountered reading from fdout. */ static int fderr_eof = 0; /* EOF encountered readung from fderr. */ static int fdin_is_tty = 0; /* fdin points to a tty. */ static int connection_in; /* Connection to client (input). */ static int connection_out; /* Connection to client (output). */ static int connection_closed = 0; /* Connection to client closed. */ static u_int buffer_high; /* "Soft" max buffer size. */ /* * This SIGCHLD kludge is used to detect when the child exits. The server * will exit after that, as soon as forwarded connections have terminated. */ static volatile int child_terminated; /* The child has terminated. */ void server_init_dispatch(void); int client_alive_timeouts = 0; void sigchld_handler(int sig) { int save_errno = errno; debug("Received SIGCHLD."); child_terminated = 1; signal(SIGCHLD, sigchld_handler); errno = save_errno; } /* * Make packets from buffered stderr data, and buffer it for sending * to the client. */ void make_packets_from_stderr_data(void) { int len; /* Send buffered stderr data to the client. */ while (buffer_len(&stderr_buffer) > 0 && packet_not_very_much_data_to_write()) { len = buffer_len(&stderr_buffer); if (packet_is_interactive()) { if (len > 512) len = 512; } else { /* Keep the packets at reasonable size. */ if (len > packet_get_maxsize()) len = packet_get_maxsize(); } packet_start(SSH_SMSG_STDERR_DATA); packet_put_string(buffer_ptr(&stderr_buffer), len); packet_send(); buffer_consume(&stderr_buffer, len); stderr_bytes += len; } } /* * Make packets from buffered stdout data, and buffer it for sending to the * client. */ void make_packets_from_stdout_data(void) { int len; /* Send buffered stdout data to the client. */ while (buffer_len(&stdout_buffer) > 0 && packet_not_very_much_data_to_write()) { len = buffer_len(&stdout_buffer); if (packet_is_interactive()) { if (len > 512) len = 512; } else { /* Keep the packets at reasonable size. */ if (len > packet_get_maxsize()) len = packet_get_maxsize(); } packet_start(SSH_SMSG_STDOUT_DATA); packet_put_string(buffer_ptr(&stdout_buffer), len); packet_send(); buffer_consume(&stdout_buffer, len); stdout_bytes += len; } } /* * Sleep in select() until we can do something. This will initialize the * select masks. Upon return, the masks will indicate which descriptors * have data or can accept data. Optionally, a maximum time can be specified * for the duration of the wait (0 = infinite). */ void wait_until_can_do_something(fd_set **readsetp, fd_set **writesetp, int *maxfdp, u_int max_time_milliseconds) { struct timeval tv, *tvp; int ret; int client_alive_scheduled = 0; /* * if using client_alive, set the max timeout accordingly, * and indicate that this particular timeout was for client * alive by setting the client_alive_scheduled flag. * * this could be randomized somewhat to make traffic * analysis more difficult, but we're not doing it yet. */ if (max_time_milliseconds == 0 && options.client_alive_interval) { client_alive_scheduled = 1; max_time_milliseconds = options.client_alive_interval * 1000; } else client_alive_scheduled = 0; /* When select fails we restart from here. */ retry_select: /* Allocate and update select() masks for channel descriptors. */ channel_prepare_select(readsetp, writesetp, maxfdp, 0); if (compat20) { /* wrong: bad condition XXX */ if (channel_not_very_much_buffered_data()) FD_SET(connection_in, *readsetp); } else { /* * Read packets from the client unless we have too much * buffered stdin or channel data. */ if (buffer_len(&stdin_buffer) < buffer_high && channel_not_very_much_buffered_data()) FD_SET(connection_in, *readsetp); /* * If there is not too much data already buffered going to * the client, try to get some more data from the program. */ if (packet_not_very_much_data_to_write()) { if (!fdout_eof) FD_SET(fdout, *readsetp); if (!fderr_eof) FD_SET(fderr, *readsetp); } /* * If we have buffered data, try to write some of that data * to the program. */ if (fdin != -1 && buffer_len(&stdin_buffer) > 0) FD_SET(fdin, *writesetp); } /* * If we have buffered packet data going to the client, mark that * descriptor. */ if (packet_have_data_to_write()) FD_SET(connection_out, *writesetp); /* * If child has terminated and there is enough buffer space to read * from it, then read as much as is available and exit. */ if (child_terminated && packet_not_very_much_data_to_write()) if (max_time_milliseconds == 0 || client_alive_scheduled) max_time_milliseconds = 100; if (max_time_milliseconds == 0) tvp = NULL; else { tv.tv_sec = max_time_milliseconds / 1000; tv.tv_usec = 1000 * (max_time_milliseconds % 1000); tvp = &tv; } if (tvp!=NULL) debug3("tvp!=NULL kid %d mili %d", child_terminated, max_time_milliseconds); /* Wait for something to happen, or the timeout to expire. */ ret = select((*maxfdp)+1, *readsetp, *writesetp, NULL, tvp); if (ret == -1) { if (errno != EINTR) error("select: %.100s", strerror(errno)); else goto retry_select; } if (ret == 0 && client_alive_scheduled) { /* timeout, check to see how many we have had */ client_alive_timeouts++; if (client_alive_timeouts > options.client_alive_count_max ) { packet_disconnect( "Timeout, your session not responding."); } else { /* * send a bogus channel request with "wantreply" * we should get back a failure */ int id; id = channel_find_open(); if (id != -1) { channel_request_start(id, "keepalive@openssh.com", 1); packet_send(); } else packet_disconnect( "No open channels after timeout!"); } } } /* * Processes input from the client and the program. Input data is stored * in buffers and processed later. */ void process_input(fd_set * readset) { int len; char buf[16384]; /* Read and buffer any input data from the client. */ if (FD_ISSET(connection_in, readset)) { len = read(connection_in, buf, sizeof(buf)); if (len == 0) { verbose("Connection closed by remote host."); connection_closed = 1; if (compat20) return; fatal_cleanup(); } else if (len < 0) { if (errno != EINTR && errno != EAGAIN) { verbose("Read error from remote host: %.100s", strerror(errno)); fatal_cleanup(); } } else { /* Buffer any received data. */ packet_process_incoming(buf, len); } } if (compat20) return; /* Read and buffer any available stdout data from the program. */ if (!fdout_eof && FD_ISSET(fdout, readset)) { len = read(fdout, buf, sizeof(buf)); if (len < 0 && (errno == EINTR || errno == EAGAIN)) { /* do nothing */ } else if (len <= 0) { fdout_eof = 1; } else { buffer_append(&stdout_buffer, buf, len); fdout_bytes += len; } } /* Read and buffer any available stderr data from the program. */ if (!fderr_eof && FD_ISSET(fderr, readset)) { len = read(fderr, buf, sizeof(buf)); if (len < 0 && (errno == EINTR || errno == EAGAIN)) { /* do nothing */ } else if (len <= 0) { fderr_eof = 1; } else { buffer_append(&stderr_buffer, buf, len); } } } /* * Sends data from internal buffers to client program stdin. */ void process_output(fd_set * writeset) { struct termios tio; int len; /* Write buffered data to program stdin. */ if (!compat20 && fdin != -1 && FD_ISSET(fdin, writeset)) { len = write(fdin, buffer_ptr(&stdin_buffer), buffer_len(&stdin_buffer)); if (len < 0 && (errno == EINTR || errno == EAGAIN)) { /* do nothing */ } else if (len <= 0) { #ifdef USE_PIPES close(fdin); #else if (fdin != fdout) close(fdin); else shutdown(fdin, SHUT_WR); /* We will no longer send. */ #endif fdin = -1; } else { /* Successful write. */ if (fdin_is_tty && tcgetattr(fdin, &tio) == 0 && !(tio.c_lflag & ECHO) && (tio.c_lflag & ICANON)) { /* * Simulate echo to reduce the impact of * traffic analysis */ packet_send_ignore(len); packet_send(); } /* Consume the data from the buffer. */ buffer_consume(&stdin_buffer, len); /* Update the count of bytes written to the program. */ stdin_bytes += len; } } /* Send any buffered packet data to the client. */ if (FD_ISSET(connection_out, writeset)) packet_write_poll(); } /* * Wait until all buffered output has been sent to the client. * This is used when the program terminates. */ void drain_output(void) { /* Send any buffered stdout data to the client. */ if (buffer_len(&stdout_buffer) > 0) { packet_start(SSH_SMSG_STDOUT_DATA); packet_put_string(buffer_ptr(&stdout_buffer), buffer_len(&stdout_buffer)); packet_send(); /* Update the count of sent bytes. */ stdout_bytes += buffer_len(&stdout_buffer); } /* Send any buffered stderr data to the client. */ if (buffer_len(&stderr_buffer) > 0) { packet_start(SSH_SMSG_STDERR_DATA); packet_put_string(buffer_ptr(&stderr_buffer), buffer_len(&stderr_buffer)); packet_send(); /* Update the count of sent bytes. */ stderr_bytes += buffer_len(&stderr_buffer); } /* Wait until all buffered data has been written to the client. */ packet_write_wait(); } void process_buffered_input_packets(void) { dispatch_run(DISPATCH_NONBLOCK, NULL, compat20 ? xxx_kex : NULL); } /* * Performs the interactive session. This handles data transmission between * the client and the program. Note that the notion of stdin, stdout, and * stderr in this function is sort of reversed: this function writes to * stdin (of the child program), and reads from stdout and stderr (of the * child program). */ void server_loop(pid_t pid, int fdin_arg, int fdout_arg, int fderr_arg) { fd_set *readset = NULL, *writeset = NULL; int max_fd; int wait_status; /* Status returned by wait(). */ pid_t wait_pid; /* pid returned by wait(). */ int waiting_termination = 0; /* Have displayed waiting close message. */ u_int max_time_milliseconds; u_int previous_stdout_buffer_bytes; u_int stdout_buffer_bytes; int type; debug("Entering interactive session."); /* Initialize the SIGCHLD kludge. */ child_terminated = 0; signal(SIGCHLD, sigchld_handler); /* Initialize our global variables. */ fdin = fdin_arg; fdout = fdout_arg; fderr = fderr_arg; /* nonblocking IO */ set_nonblock(fdin); set_nonblock(fdout); /* we don't have stderr for interactive terminal sessions, see below */ if (fderr != -1) set_nonblock(fderr); if (!(datafellows & SSH_BUG_IGNOREMSG) && isatty(fdin)) fdin_is_tty = 1; connection_in = packet_get_connection_in(); connection_out = packet_get_connection_out(); previous_stdout_buffer_bytes = 0; /* Set approximate I/O buffer size. */ if (packet_is_interactive()) buffer_high = 4096; else buffer_high = 64 * 1024; /* Initialize max_fd to the maximum of the known file descriptors. */ max_fd = MAX(fdin, fdout); if (fderr != -1) max_fd = MAX(max_fd, fderr); max_fd = MAX(max_fd, connection_in); max_fd = MAX(max_fd, connection_out); /* Initialize Initialize buffers. */ buffer_init(&stdin_buffer); buffer_init(&stdout_buffer); buffer_init(&stderr_buffer); /* * If we have no separate fderr (which is the case when we have a pty * - there we cannot make difference between data sent to stdout and * stderr), indicate that we have seen an EOF from stderr. This way * we don\'t need to check the descriptor everywhere. */ if (fderr == -1) fderr_eof = 1; server_init_dispatch(); /* Main loop of the server for the interactive session mode. */ for (;;) { /* Process buffered packets from the client. */ process_buffered_input_packets(); /* * If we have received eof, and there is no more pending * input data, cause a real eof by closing fdin. */ if (stdin_eof && fdin != -1 && buffer_len(&stdin_buffer) == 0) { #ifdef USE_PIPES close(fdin); #else if (fdin != fdout) close(fdin); else shutdown(fdin, SHUT_WR); /* We will no longer send. */ #endif fdin = -1; } /* Make packets from buffered stderr data to send to the client. */ make_packets_from_stderr_data(); /* * Make packets from buffered stdout data to send to the * client. If there is very little to send, this arranges to * not send them now, but to wait a short while to see if we * are getting more data. This is necessary, as some systems * wake up readers from a pty after each separate character. */ max_time_milliseconds = 0; stdout_buffer_bytes = buffer_len(&stdout_buffer); if (stdout_buffer_bytes != 0 && stdout_buffer_bytes < 256 && stdout_buffer_bytes != previous_stdout_buffer_bytes) { /* try again after a while */ max_time_milliseconds = 10; } else { /* Send it now. */ make_packets_from_stdout_data(); } previous_stdout_buffer_bytes = buffer_len(&stdout_buffer); /* Send channel data to the client. */ if (packet_not_very_much_data_to_write()) channel_output_poll(); /* * Bail out of the loop if the program has closed its output * descriptors, and we have no more data to send to the * client, and there is no pending buffered data. */ if (fdout_eof && fderr_eof && !packet_have_data_to_write() && buffer_len(&stdout_buffer) == 0 && buffer_len(&stderr_buffer) == 0) { if (!channel_still_open()) break; if (!waiting_termination) { const char *s = "Waiting for forwarded connections to terminate...\r\n"; char *cp; waiting_termination = 1; buffer_append(&stderr_buffer, s, strlen(s)); /* Display list of open channels. */ cp = channel_open_message(); buffer_append(&stderr_buffer, cp, strlen(cp)); xfree(cp); } } /* Sleep in select() until we can do something. */ wait_until_can_do_something(&readset, &writeset, &max_fd, max_time_milliseconds); /* Process any channel events. */ channel_after_select(readset, writeset); /* Process input from the client and from program stdout/stderr. */ process_input(readset); /* Process output to the client and to program stdin. */ process_output(writeset); } if (readset) xfree(readset); if (writeset) xfree(writeset); /* Cleanup and termination code. */ /* Wait until all output has been sent to the client. */ drain_output(); debug("End of interactive session; stdin %ld, stdout (read %ld, sent %ld), stderr %ld bytes.", stdin_bytes, fdout_bytes, stdout_bytes, stderr_bytes); /* Free and clear the buffers. */ buffer_free(&stdin_buffer); buffer_free(&stdout_buffer); buffer_free(&stderr_buffer); /* Close the file descriptors. */ if (fdout != -1) close(fdout); fdout = -1; fdout_eof = 1; if (fderr != -1) close(fderr); fderr = -1; fderr_eof = 1; if (fdin != -1) close(fdin); fdin = -1; channel_free_all(); /* We no longer want our SIGCHLD handler to be called. */ signal(SIGCHLD, SIG_DFL); wait_pid = waitpid(-1, &wait_status, child_terminated ? WNOHANG : 0); if (wait_pid == -1) packet_disconnect("wait: %.100s", strerror(errno)); else if (wait_pid != pid) error("Strange, wait returned pid %d, expected %d", wait_pid, pid); /* Check if it exited normally. */ if (WIFEXITED(wait_status)) { /* Yes, normal exit. Get exit status and send it to the client. */ debug("Command exited with status %d.", WEXITSTATUS(wait_status)); packet_start(SSH_SMSG_EXITSTATUS); packet_put_int(WEXITSTATUS(wait_status)); packet_send(); packet_write_wait(); /* * Wait for exit confirmation. Note that there might be * other packets coming before it; however, the program has * already died so we just ignore them. The client is * supposed to respond with the confirmation when it receives * the exit status. */ do { int plen; type = packet_read(&plen); } while (type != SSH_CMSG_EXIT_CONFIRMATION); debug("Received exit confirmation."); return; } /* Check if the program terminated due to a signal. */ if (WIFSIGNALED(wait_status)) packet_disconnect("Command terminated on signal %d.", WTERMSIG(wait_status)); /* Some weird exit cause. Just exit. */ packet_disconnect("wait returned status %04x.", wait_status); /* NOTREACHED */ } void server_loop2(void) { fd_set *readset = NULL, *writeset = NULL; int rekeying = 0, max_fd, status; pid_t pid; debug("Entering interactive session for SSH2."); signal(SIGCHLD, sigchld_handler); child_terminated = 0; connection_in = packet_get_connection_in(); connection_out = packet_get_connection_out(); max_fd = MAX(connection_in, connection_out); server_init_dispatch(); for (;;) { process_buffered_input_packets(); rekeying = (xxx_kex != NULL && !xxx_kex->done); if (!rekeying && packet_not_very_much_data_to_write()) channel_output_poll(); wait_until_can_do_something(&readset, &writeset, &max_fd, rekeying); if (child_terminated) { while ((pid = waitpid(-1, &status, WNOHANG)) > 0) session_close_by_pid(pid, status); child_terminated = 0; } if (!rekeying) channel_after_select(readset, writeset); process_input(readset); if (connection_closed) break; process_output(writeset); } if (readset) xfree(readset); if (writeset) xfree(writeset); channel_free_all(); signal(SIGCHLD, SIG_DFL); while ((pid = waitpid(-1, &status, WNOHANG)) > 0) session_close_by_pid(pid, status); } void server_input_channel_failure(int type, int plen, void *ctxt) { debug("Got CHANNEL_FAILURE for keepalive"); /* * reset timeout, since we got a sane answer from the client. * even if this was generated by something other than * the bogus CHANNEL_REQUEST we send for keepalives. */ client_alive_timeouts = 0; } void server_input_stdin_data(int type, int plen, void *ctxt) { char *data; u_int data_len; /* Stdin data from the client. Append it to the buffer. */ /* Ignore any data if the client has closed stdin. */ if (fdin == -1) return; data = packet_get_string(&data_len); packet_integrity_check(plen, (4 + data_len), type); buffer_append(&stdin_buffer, data, data_len); memset(data, 0, data_len); xfree(data); } void server_input_eof(int type, int plen, void *ctxt) { /* * Eof from the client. The stdin descriptor to the * program will be closed when all buffered data has * drained. */ debug("EOF received for stdin."); packet_integrity_check(plen, 0, type); stdin_eof = 1; } void server_input_window_size(int type, int plen, void *ctxt) { int row = packet_get_int(); int col = packet_get_int(); int xpixel = packet_get_int(); int ypixel = packet_get_int(); debug("Window change received."); packet_integrity_check(plen, 4 * 4, type); if (fdin != -1) pty_change_window_size(fdin, row, col, xpixel, ypixel); } Channel * server_request_direct_tcpip(char *ctype) { Channel *c; int sock; char *target, *originator; int target_port, originator_port; target = packet_get_string(NULL); target_port = packet_get_int(); originator = packet_get_string(NULL); originator_port = packet_get_int(); packet_done(); debug("server_request_direct_tcpip: originator %s port %d, target %s port %d", originator, originator_port, target, target_port); /* XXX check permission */ sock = channel_connect_to(target, target_port); xfree(target); xfree(originator); if (sock < 0) return NULL; c = channel_new(ctype, SSH_CHANNEL_CONNECTING, sock, sock, -1, CHAN_TCP_WINDOW_DEFAULT, CHAN_TCP_PACKET_DEFAULT, 0, xstrdup("direct-tcpip"), 1); if (c == NULL) { error("server_request_direct_tcpip: channel_new failed"); close(sock); } return c; } Channel * server_request_session(char *ctype) { Channel *c; debug("input_session_request"); packet_done(); /* * A server session has no fd to read or write until a * CHANNEL_REQUEST for a shell is made, so we set the type to * SSH_CHANNEL_LARVAL. Additionally, a callback for handling all * CHANNEL_REQUEST messages is registered. */ c = channel_new(ctype, SSH_CHANNEL_LARVAL, -1, -1, -1, /*window size*/0, CHAN_SES_PACKET_DEFAULT, 0, xstrdup("server-session"), 1); if (c == NULL) { error("server_request_session: channel_new failed"); return NULL; } if (session_open(c->self) != 1) { debug("session open failed, free channel %d", c->self); channel_free(c); return NULL; } channel_register_callback(c->self, SSH2_MSG_CHANNEL_REQUEST, session_input_channel_req, (void *)0); channel_register_cleanup(c->self, session_close_by_channel); return c; } void server_input_channel_open(int type, int plen, void *ctxt) { Channel *c = NULL; char *ctype; u_int len; int rchan; int rmaxpack; int rwindow; ctype = packet_get_string(&len); rchan = packet_get_int(); rwindow = packet_get_int(); rmaxpack = packet_get_int(); debug("server_input_channel_open: ctype %s rchan %d win %d max %d", ctype, rchan, rwindow, rmaxpack); if (strcmp(ctype, "session") == 0) { c = server_request_session(ctype); } else if (strcmp(ctype, "direct-tcpip") == 0) { c = server_request_direct_tcpip(ctype); } if (c != NULL) { debug("server_input_channel_open: confirm %s", ctype); c->remote_id = rchan; c->remote_window = rwindow; c->remote_maxpacket = rmaxpack; if (c->type != SSH_CHANNEL_CONNECTING) { packet_start(SSH2_MSG_CHANNEL_OPEN_CONFIRMATION); packet_put_int(c->remote_id); packet_put_int(c->self); packet_put_int(c->local_window); packet_put_int(c->local_maxpacket); packet_send(); } } else { debug("server_input_channel_open: failure %s", ctype); packet_start(SSH2_MSG_CHANNEL_OPEN_FAILURE); packet_put_int(rchan); packet_put_int(SSH2_OPEN_ADMINISTRATIVELY_PROHIBITED); if (!(datafellows & SSH_BUG_OPENFAILURE)) { packet_put_cstring("open failed"); packet_put_cstring(""); } packet_send(); } xfree(ctype); } void server_input_global_request(int type, int plen, void *ctxt) { char *rtype; int want_reply; int success = 0; rtype = packet_get_string(NULL); want_reply = packet_get_char(); debug("server_input_global_request: rtype %s want_reply %d", rtype, want_reply); /* -R style forwarding */ if (strcmp(rtype, "tcpip-forward") == 0) { struct passwd *pw; char *listen_address; u_short listen_port; pw = auth_get_user(); if (pw == NULL) fatal("server_input_global_request: no user"); listen_address = packet_get_string(NULL); /* XXX currently ignored */ listen_port = (u_short)packet_get_int(); debug("server_input_global_request: tcpip-forward listen %s port %d", listen_address, listen_port); /* check permissions */ if (!options.allow_tcp_forwarding || no_port_forwarding_flag || (listen_port < IPPORT_RESERVED && pw->pw_uid != 0)) { success = 0; packet_send_debug("Server has disabled port forwarding."); } else { /* Start listening on the port */ success = channel_request_forwarding( listen_address, listen_port, /*unspec host_to_connect*/ "", /*unspec port_to_connect*/ 0, options.gateway_ports, /*remote*/ 1); } xfree(listen_address); } if (want_reply) { packet_start(success ? SSH2_MSG_REQUEST_SUCCESS : SSH2_MSG_REQUEST_FAILURE); packet_send(); packet_write_wait(); } xfree(rtype); } void server_init_dispatch_20(void) { debug("server_init_dispatch_20"); dispatch_init(&dispatch_protocol_error); dispatch_set(SSH2_MSG_CHANNEL_CLOSE, &channel_input_oclose); dispatch_set(SSH2_MSG_CHANNEL_DATA, &channel_input_data); dispatch_set(SSH2_MSG_CHANNEL_EOF, &channel_input_ieof); dispatch_set(SSH2_MSG_CHANNEL_EXTENDED_DATA, &channel_input_extended_data); dispatch_set(SSH2_MSG_CHANNEL_OPEN, &server_input_channel_open); dispatch_set(SSH2_MSG_CHANNEL_OPEN_CONFIRMATION, &channel_input_open_confirmation); dispatch_set(SSH2_MSG_CHANNEL_OPEN_FAILURE, &channel_input_open_failure); dispatch_set(SSH2_MSG_CHANNEL_REQUEST, &channel_input_channel_request); dispatch_set(SSH2_MSG_CHANNEL_WINDOW_ADJUST, &channel_input_window_adjust); dispatch_set(SSH2_MSG_GLOBAL_REQUEST, &server_input_global_request); /* client_alive */ dispatch_set(SSH2_MSG_CHANNEL_FAILURE, &server_input_channel_failure); /* rekeying */ dispatch_set(SSH2_MSG_KEXINIT, &kex_input_kexinit); } void server_init_dispatch_13(void) { debug("server_init_dispatch_13"); dispatch_init(NULL); dispatch_set(SSH_CMSG_EOF, &server_input_eof); dispatch_set(SSH_CMSG_STDIN_DATA, &server_input_stdin_data); dispatch_set(SSH_CMSG_WINDOW_SIZE, &server_input_window_size); dispatch_set(SSH_MSG_CHANNEL_CLOSE, &channel_input_close); dispatch_set(SSH_MSG_CHANNEL_CLOSE_CONFIRMATION, &channel_input_close_confirmation); dispatch_set(SSH_MSG_CHANNEL_DATA, &channel_input_data); dispatch_set(SSH_MSG_CHANNEL_OPEN_CONFIRMATION, &channel_input_open_confirmation); dispatch_set(SSH_MSG_CHANNEL_OPEN_FAILURE, &channel_input_open_failure); dispatch_set(SSH_MSG_PORT_OPEN, &channel_input_port_open); } void server_init_dispatch_15(void) { server_init_dispatch_13(); debug("server_init_dispatch_15"); dispatch_set(SSH_MSG_CHANNEL_CLOSE, &channel_input_ieof); dispatch_set(SSH_MSG_CHANNEL_CLOSE_CONFIRMATION, &channel_input_oclose); } void server_init_dispatch(void) { if (compat20) server_init_dispatch_20(); else if (compat13) server_init_dispatch_13(); else server_init_dispatch_15(); }