.\" Copyright (c) 1994-1996,1998-2003 Todd C. Miller .\" All rights reserved. .\" .\" Redistribution and use in source and binary forms, with or without .\" modification, are permitted provided that the following conditions .\" are met: .\" .\" 1. Redistributions of source code must retain the above copyright .\" notice, this list of conditions and the following disclaimer. .\" .\" 2. Redistributions in binary form must reproduce the above copyright .\" notice, this list of conditions and the following disclaimer in the .\" documentation and/or other materials provided with the distribution. .\" .\" 3. The name of the author may not be used to endorse or promote products .\" derived from this software without specific prior written permission .\" from the author. .\" .\" 4. Products derived from this software may not be called "Sudo" nor .\" may "Sudo" appear in their names without specific prior written .\" permission from the author. .\" .\" THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, .\" INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY .\" AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL .\" THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, .\" EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, .\" PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; .\" OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, .\" WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR .\" OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF .\" ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. .\" .\" $Sudo: sudoers.man.in,v 1.24 2003/03/15 20:33:31 millert Exp $ .\" Automatically generated by Pod::Man v1.34, Pod::Parser v1.13 .\" .\" Standard preamble: .\" ======================================================================== .de Sh \" Subsection heading .br .if t .Sp .ne 5 .PP \fB\\$1\fR .PP .. .de Sp \" Vertical space (when we can't use .PP) .if t .sp .5v .if n .sp .. .de Vb \" Begin verbatim text .ft CW .nf .ne \\$1 .. .de Ve \" End verbatim text .ft R .fi .. .\" Set up some character translations and predefined strings. \*(-- will .\" give an unbreakable dash, \*(PI will give pi, \*(L" will give a left .\" double quote, and \*(R" will give a right double quote. | will give a .\" real vertical bar. \*(C+ will give a nicer C++. Capital omega is used to .\" do unbreakable dashes and therefore won't be available. \*(C` and \*(C' .\" expand to `' in nroff, nothing in troff, for use with C<>. .tr \(*W-|\(bv\*(Tr .ds C+ C\v'-.1v'\h'-1p'\s-2+\h'-1p'+\s0\v'.1v'\h'-1p' .ie n \{\ . ds -- \(*W- . ds PI pi . if (\n(.H=4u)&(1m=24u) .ds -- \(*W\h'-12u'\(*W\h'-12u'-\" diablo 10 pitch . if (\n(.H=4u)&(1m=20u) .ds -- \(*W\h'-12u'\(*W\h'-8u'-\" diablo 12 pitch . ds L" "" . ds R" "" . ds C` . ds C' 'br\} .el\{\ . ds -- \|\(em\| . ds PI \(*p . ds L" `` . ds R" '' 'br\} .\" .\" If the F register is turned on, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.Sh), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. .if \nF \{\ . de IX . tm Index:\\$1\t\\n%\t"\\$2" .. . nr % 0 . rr F .\} .\" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .hy 0 .if n .na .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. . \" fudge factors for nroff and troff .if n \{\ . ds #H 0 . ds #V .8m . ds #F .3m . ds #[ \f1 . ds #] \fP .\} .if t \{\ . ds #H ((1u-(\\\\n(.fu%2u))*.13m) . ds #V .6m . ds #F 0 . ds #[ \& . ds #] \& .\} . \" simple accents for nroff and troff .if n \{\ . ds ' \& . ds ` \& . ds ^ \& . ds , \& . ds ~ ~ . ds / .\} .if t \{\ . ds ' \\k:\h'-(\\n(.wu*8/10-\*(#H)'\'\h"|\\n:u" . ds ` \\k:\h'-(\\n(.wu*8/10-\*(#H)'\`\h'|\\n:u' . ds ^ \\k:\h'-(\\n(.wu*10/11-\*(#H)'^\h'|\\n:u' . ds , \\k:\h'-(\\n(.wu*8/10)',\h'|\\n:u' . ds ~ \\k:\h'-(\\n(.wu-\*(#H-.1m)'~\h'|\\n:u' . ds / \\k:\h'-(\\n(.wu*8/10-\*(#H)'\z\(sl\h'|\\n:u' .\} . \" troff and (daisy-wheel) nroff accents .ds : \\k:\h'-(\\n(.wu*8/10-\*(#H+.1m+\*(#F)'\v'-\*(#V'\z.\h'.2m+\*(#F'.\h'|\\n:u'\v'\*(#V' .ds 8 \h'\*(#H'\(*b\h'-\*(#H' .ds o \\k:\h'-(\\n(.wu+\w'\(de'u-\*(#H)/2u'\v'-.3n'\*(#[\z\(de\v'.3n'\h'|\\n:u'\*(#] .ds d- \h'\*(#H'\(pd\h'-\w'~'u'\v'-.25m'\f2\(hy\fP\v'.25m'\h'-\*(#H' .ds D- D\\k:\h'-\w'D'u'\v'-.11m'\z\(hy\v'.11m'\h'|\\n:u' .ds th \*(#[\v'.3m'\s+1I\s-1\v'-.3m'\h'-(\w'I'u*2/3)'\s-1o\s+1\*(#] .ds Th \*(#[\s+2I\s-2\h'-\w'I'u*3/5'\v'-.3m'o\v'.3m'\*(#] .ds ae a\h'-(\w'a'u*4/10)'e .ds Ae A\h'-(\w'A'u*4/10)'E . \" corrections for vroff .if v .ds ~ \\k:\h'-(\\n(.wu*9/10-\*(#H)'\s-2\u~\d\s+2\h'|\\n:u' .if v .ds ^ \\k:\h'-(\\n(.wu*10/11-\*(#H)'\v'-.4m'^\v'.4m'\h'|\\n:u' . \" for low resolution devices (crt and lpr) .if \n(.H>23 .if \n(.V>19 \ \{\ . ds : e . ds 8 ss . ds o a . ds d- d\h'-1'\(ga . ds D- D\h'-1'\(hy . ds th \o'bp' . ds Th \o'LP' . ds ae ae . ds Ae AE .\} .rm #[ #] #H #V #F C .\" ======================================================================== .\" .IX Title "SUDOERS 5" .TH SUDOERS 5 "March 13, 2003" "1.6.7" "MAINTENANCE COMMANDS" .SH "NAME" sudoers \- list of which users may execute what .SH "DESCRIPTION" .IX Header "DESCRIPTION" The \fIsudoers\fR file is composed of two types of entries: aliases (basically variables) and user specifications (which specify who may run what). The grammar of \fIsudoers\fR will be described below in Extended Backus-Naur Form (\s-1EBNF\s0). Don't despair if you don't know what \s-1EBNF\s0 is; it is fairly simple, and the definitions below are annotated. .Sh "Quick guide to \s-1EBNF\s0" .IX Subsection "Quick guide to EBNF" \&\s-1EBNF\s0 is a concise and exact way of describing the grammar of a language. Each \s-1EBNF\s0 definition is made up of \fIproduction rules\fR. E.g., .PP .Vb 1 \& symbol ::= definition | alternate1 | alternate2 ... .Ve .PP Each \fIproduction rule\fR references others and thus makes up a grammar for the language. \s-1EBNF\s0 also contains the following operators, which many readers will recognize from regular expressions. Do not, however, confuse them with \*(L"wildcard\*(R" characters, which have different meanings. .ie n .IP "\*(C`?\*(C'" 8 .el .IP "\f(CW\*(C`?\*(C'\fR" 8 .IX Item "?" Means that the preceding symbol (or group of symbols) is optional. That is, it may appear once or not at all. .ie n .IP "\*(C`*\*(C'" 8 .el .IP "\f(CW\*(C`*\*(C'\fR" 8 .IX Item "*" Means that the preceding symbol (or group of symbols) may appear zero or more times. .ie n .IP "\*(C`+\*(C'" 8 .el .IP "\f(CW\*(C`+\*(C'\fR" 8 .IX Item "+" Means that the preceding symbol (or group of symbols) may appear one or more times. .PP Parentheses may be used to group symbols together. For clarity, we will use single quotes ('') to designate what is a verbatim character string (as opposed to a symbol name). .Sh "Aliases" .IX Subsection "Aliases" There are four kinds of aliases: \f(CW\*(C`User_Alias\*(C'\fR, \f(CW\*(C`Runas_Alias\*(C'\fR, \&\f(CW\*(C`Host_Alias\*(C'\fR and \f(CW\*(C`Cmnd_Alias\*(C'\fR. .PP .Vb 4 \& Alias ::= 'User_Alias' User_Alias (':' User_Alias)* | \& 'Runas_Alias' Runas_Alias (':' Runas_Alias)* | \& 'Host_Alias' Host_Alias (':' Host_Alias)* | \& 'Cmnd_Alias' Cmnd_Alias (':' Cmnd_Alias)* .Ve .PP .Vb 1 \& User_Alias ::= NAME '=' User_List .Ve .PP .Vb 1 \& Runas_Alias ::= NAME '=' Runas_List .Ve .PP .Vb 1 \& Host_Alias ::= NAME '=' Host_List .Ve .PP .Vb 1 \& Cmnd_Alias ::= NAME '=' Cmnd_List .Ve .PP .Vb 1 \& NAME ::= [A-Z]([A-Z][0-9]_)* .Ve .PP Each \fIalias\fR definition is of the form .PP .Vb 1 \& Alias_Type NAME = item1, item2, ... .Ve .PP where \fIAlias_Type\fR is one of \f(CW\*(C`User_Alias\*(C'\fR, \f(CW\*(C`Runas_Alias\*(C'\fR, \f(CW\*(C`Host_Alias\*(C'\fR, or \f(CW\*(C`Cmnd_Alias\*(C'\fR. A \f(CW\*(C`NAME\*(C'\fR is a string of uppercase letters, numbers, and underscore characters ('_'). A \f(CW\*(C`NAME\*(C'\fR \fBmust\fR start with an uppercase letter. It is possible to put several alias definitions of the same type on a single line, joined by a colon (':'). E.g., .PP .Vb 1 \& Alias_Type NAME = item1, item2, item3 : NAME = item4, item5 .Ve .PP The definitions of what constitutes a valid \fIalias\fR member follow. .PP .Vb 2 \& User_List ::= User | \& User ',' User_List .Ve .PP .Vb 4 \& User ::= '!'* username | \& '!'* '%'group | \& '!'* '+'netgroup | \& '!'* User_Alias .Ve .PP A \f(CW\*(C`User_List\*(C'\fR is made up of one or more usernames, uids (prefixed with '#'), System groups (prefixed with '%'), netgroups (prefixed with '+') and other aliases. Each list item may be prefixed with one or more '!' operators. An odd number of '!' operators negate the value of the item; an even number just cancel each other out. .PP .Vb 2 \& Runas_List ::= Runas_User | \& Runas_User ',' Runas_List .Ve .PP .Vb 5 \& Runas_User ::= '!'* username | \& '!'* '#'uid | \& '!'* '%'group | \& '!'* +netgroup | \& '!'* Runas_Alias .Ve .PP A \f(CW\*(C`Runas_List\*(C'\fR is similar to a \f(CW\*(C`User_List\*(C'\fR except that it can also contain uids (prefixed with '#') and instead of \f(CW\*(C`User_Alias\*(C'\fRes it can contain \f(CW\*(C`Runas_Alias\*(C'\fRes. .PP .Vb 2 \& Host_List ::= Host | \& Host ',' Host_List .Ve .PP .Vb 5 \& Host ::= '!'* hostname | \& '!'* ip_addr | \& '!'* network(/netmask)? | \& '!'* '+'netgroup | \& '!'* Host_Alias .Ve .PP A \f(CW\*(C`Host_List\*(C'\fR is made up of one or more hostnames, \s-1IP\s0 addresses, network numbers, netgroups (prefixed with '+') and other aliases. Again, the value of an item may be negated with the '!' operator. If you do not specify a netmask with a network number, the netmask of the host's ethernet interface(s) will be used when matching. The netmask may be specified either in dotted quad notation (e.g. 255.255.255.0) or \s-1CIDR\s0 notation (number of bits, e.g. 24). A hostname may include shell-style wildcards (see `Wildcards' section below), but unless the \f(CW\*(C`hostname\*(C'\fR command on your machine returns the fully qualified hostname, you'll need to use the \fIfqdn\fR option for wildcards to be useful. .PP .Vb 2 \& Cmnd_List ::= Cmnd | \& Cmnd ',' Cmnd_List .Ve .PP .Vb 3 \& commandname ::= filename | \& filename args | \& filename '""' .Ve .PP .Vb 3 \& Cmnd ::= '!'* commandname | \& '!'* directory | \& '!'* Cmnd_Alias .Ve .PP A \f(CW\*(C`Cmnd_List\*(C'\fR is a list of one or more commandnames, directories, and other aliases. A commandname is a fully qualified filename which may include shell-style wildcards (see `Wildcards' section below). A simple filename allows the user to run the command with any arguments he/she wishes. However, you may also specify command line arguments (including wildcards). Alternately, you can specify \f(CW""\fR to indicate that the command may only be run \fBwithout\fR command line arguments. A directory is a fully qualified pathname ending in a '/'. When you specify a directory in a \f(CW\*(C`Cmnd_List\*(C'\fR, the user will be able to run any file within that directory (but not in any subdirectories therein). .PP If a \f(CW\*(C`Cmnd\*(C'\fR has associated command line arguments, then the arguments in the \f(CW\*(C`Cmnd\*(C'\fR must match exactly those given by the user on the command line (or match the wildcards if there are any). Note that the following characters must be escaped with a '\e' if they are used in command arguments: ',', ':', '=', '\e'. .Sh "Defaults" .IX Subsection "Defaults" Certain configuration options may be changed from their default values at runtime via one or more \f(CW\*(C`Default_Entry\*(C'\fR lines. These may affect all users on any host, all users on a specific host, a specific user, or commands being run as a specific user. When multiple entries match, they are applied in order. Where there are conflicting values, the last value on a matching line takes effect. .PP .Vb 4 \& Default_Type ::= 'Defaults' || \& 'Defaults' '@' Host || \& 'Defaults' ':' User || \& 'Defaults' '>' RunasUser .Ve .PP .Vb 1 \& Default_Entry ::= Default_Type Parameter_List .Ve .PP .Vb 4 \& Parameter ::= Parameter '=' Value || \& Parameter '+=' Value || \& Parameter '-=' Value || \& '!'* Parameter || .Ve .PP Parameters may be \fBflags\fR, \fBinteger\fR values, \fBstrings\fR, or \fBlists\fR. Flags are implicitly boolean and can be turned off via the '!' operator. Some integer, string and list parameters may also be used in a boolean context to disable them. Values may be enclosed in double quotes (\f(CW\*(C`"\*(C'\fR) when they contain multiple words. Special characters may be escaped with a backslash (\f(CW\*(C`\e\*(C'\fR). .PP Lists have two additional assignment operators, \f(CW\*(C`+=\*(C'\fR and \f(CW\*(C`\-=\*(C'\fR. These operators are used to add to and delete from a list respectively. It is not an error to use the \f(CW\*(C`\-=\*(C'\fR operator to remove an element that does not exist in a list. .PP Note that since the \fIsudoers\fR file is parsed in order the best place to put the Defaults section is after the Host, User, and Cmnd aliases but before the user specifications. .PP \&\fBFlags\fR: .IP "long_otp_prompt" 12 .IX Item "long_otp_prompt" When validating with a One Time Password scheme (\fBS/Key\fR or \fB\s-1OPIE\s0\fR), a two-line prompt is used to make it easier to cut and paste the challenge to a local window. It's not as pretty as the default but some people find it more convenient. This flag is \fIoff\fR by default. .IP "ignore_dot" 12 .IX Item "ignore_dot" If set, \fBsudo\fR will ignore '.' or '' (current dir) in the \f(CW\*(C`PATH\*(C'\fR environment variable; the \f(CW\*(C`PATH\*(C'\fR itself is not modified. This flag is \fIon\fR by default. .IP "mail_always" 12 .IX Item "mail_always" Send mail to the \fImailto\fR user every time a users runs \fBsudo\fR. This flag is \fIoff\fR by default. .IP "mail_badpass" 12 .IX Item "mail_badpass" Send mail to the \fImailto\fR user if the user running sudo does not enter the correct password. This flag is \fIoff\fR by default. .IP "mail_no_user" 12 .IX Item "mail_no_user" If set, mail will be sent to the \fImailto\fR user if the invoking user is not in the \fIsudoers\fR file. This flag is \fIon\fR by default. .IP "mail_no_host" 12 .IX Item "mail_no_host" If set, mail will be sent to the \fImailto\fR user if the invoking user exists in the \fIsudoers\fR file, but is not allowed to run commands on the current host. This flag is \fIoff\fR by default. .IP "mail_no_perms" 12 .IX Item "mail_no_perms" If set, mail will be sent to the \fImailto\fR user if the invoking user is allowed to use \fBsudo\fR but the command they are trying is not listed in their \fIsudoers\fR file entry. This flag is \fIoff\fR by default. .IP "tty_tickets" 12 .IX Item "tty_tickets" If set, users must authenticate on a per-tty basis. Normally, \&\fBsudo\fR uses a directory in the ticket dir with the same name as the user running it. With this flag enabled, \fBsudo\fR will use a file named for the tty the user is logged in on in that directory. This flag is \fIoff\fR by default. .IP "lecture" 12 .IX Item "lecture" If set, a user will receive a short lecture the first time he/she runs \fBsudo\fR. This flag is \fIon\fR by default. .IP "authenticate" 12 .IX Item "authenticate" If set, users must authenticate themselves via a password (or other means of authentication) before they may run commands. This default may be overridden via the \f(CW\*(C`PASSWD\*(C'\fR and \f(CW\*(C`NOPASSWD\*(C'\fR tags. This flag is \fIon\fR by default. .IP "root_sudo" 12 .IX Item "root_sudo" If set, root is allowed to run \fBsudo\fR too. Disabling this prevents users from \*(L"chaining\*(R" \fBsudo\fR commands to get a root shell by doing something like \f(CW"sudo sudo /bin/sh"\fR. This flag is \fIon\fR by default. .IP "log_host" 12 .IX Item "log_host" If set, the hostname will be logged in the (non\-syslog) \fBsudo\fR log file. This flag is \fIoff\fR by default. .IP "log_year" 12 .IX Item "log_year" If set, the four-digit year will be logged in the (non\-syslog) \fBsudo\fR log file. This flag is \fIoff\fR by default. .IP "shell_noargs" 12 .IX Item "shell_noargs" If set and \fBsudo\fR is invoked with no arguments it acts as if the \&\fB\-s\fR flag had been given. That is, it runs a shell as root (the shell is determined by the \f(CW\*(C`SHELL\*(C'\fR environment variable if it is set, falling back on the shell listed in the invoking user's /etc/passwd entry if not). This flag is \fIoff\fR by default. .IP "set_home" 12 .IX Item "set_home" If set and \fBsudo\fR is invoked with the \fB\-s\fR flag the \f(CW\*(C`HOME\*(C'\fR environment variable will be set to the home directory of the target user (which is root unless the \fB\-u\fR option is used). This effectively makes the \fB\-s\fR flag imply \fB\-H\fR. This flag is \fIoff\fR by default. .IP "always_set_home" 12 .IX Item "always_set_home" If set, \fBsudo\fR will set the \f(CW\*(C`HOME\*(C'\fR environment variable to the home directory of the target user (which is root unless the \fB\-u\fR option is used). This effectively means that the \fB\-H\fR flag is always implied. This flag is \fIoff\fR by default. .IP "path_info" 12 .IX Item "path_info" Normally, \fBsudo\fR will tell the user when a command could not be found in their \f(CW\*(C`PATH\*(C'\fR environment variable. Some sites may wish to disable this as it could be used to gather information on the location of executables that the normal user does not have access to. The disadvantage is that if the executable is simply not in the user's \f(CW\*(C`PATH\*(C'\fR, \fBsudo\fR will tell the user that they are not allowed to run it, which can be confusing. This flag is \fIoff\fR by default. .IP "preserve_groups" 12 .IX Item "preserve_groups" By default \fBsudo\fR will initialize the group vector to the list of groups the target user is in. When \fIpreserve_groups\fR is set, the user's existing group vector is left unaltered. The real and effective group IDs, however, are still set to match the target user. This flag is \fIoff\fR by default. .IP "fqdn" 12 .IX Item "fqdn" Set this flag if you want to put fully qualified hostnames in the \&\fIsudoers\fR file. I.e., instead of myhost you would use myhost.mydomain.edu. You may still use the short form if you wish (and even mix the two). Beware that turning on \fIfqdn\fR requires \fBsudo\fR to make \s-1DNS\s0 lookups which may make \fBsudo\fR unusable if \s-1DNS\s0 stops working (for example if the machine is not plugged into the network). Also note that you must use the host's official name as \s-1DNS\s0 knows it. That is, you may not use a host alias (\f(CW\*(C`CNAME\*(C'\fR entry) due to performance issues and the fact that there is no way to get all aliases from \&\s-1DNS\s0. If your machine's hostname (as returned by the \f(CW\*(C`hostname\*(C'\fR command) is already fully qualified you shouldn't need to set \&\fIfqdn\fR. This flag is \fIoff\fR by default. .IP "insults" 12 .IX Item "insults" If set, \fBsudo\fR will insult users when they enter an incorrect password. This flag is \fIon\fR by default. .IP "requiretty" 12 .IX Item "requiretty" If set, \fBsudo\fR will only run when the user is logged in to a real tty. This will disallow things like \f(CW"rsh somehost sudo ls"\fR since \&\fIrsh\fR\|(1) does not allocate a tty. Because it is not possible to turn off echo when there is no tty present, some sites may with to set this flag to prevent a user from entering a visible password. This flag is \fIoff\fR by default. .IP "env_editor" 12 .IX Item "env_editor" If set, \fBvisudo\fR will use the value of the \s-1EDITOR\s0 or \s-1VISUAL\s0 environment variables before falling back on the default editor list. Note that this may create a security hole as it allows the user to run any arbitrary command as root without logging. A safer alternative is to place a colon-separated list of editors in the \f(CW\*(C`editor\*(C'\fR variable. \fBvisudo\fR will then only use the \s-1EDITOR\s0 or \s-1VISUAL\s0 if they match a value specified in \f(CW\*(C`editor\*(C'\fR. This flag is \f(CW\*(C`on\*(C'\fR by default. .IP "rootpw" 12 .IX Item "rootpw" If set, \fBsudo\fR will prompt for the root password instead of the password of the invoking user. This flag is \fIoff\fR by default. .IP "runaspw" 12 .IX Item "runaspw" If set, \fBsudo\fR will prompt for the password of the user defined by the \&\fIrunas_default\fR option (defaults to \f(CW\*(C`root\*(C'\fR) instead of the password of the invoking user. This flag is \fIoff\fR by default. .IP "targetpw" 12 .IX Item "targetpw" If set, \fBsudo\fR will prompt for the password of the user specified by the \fB\-u\fR flag (defaults to \f(CW\*(C`root\*(C'\fR) instead of the password of the invoking user. This flag is \fIoff\fR by default. .IP "set_logname" 12 .IX Item "set_logname" Normally, \fBsudo\fR will set the \f(CW\*(C`LOGNAME\*(C'\fR and \f(CW\*(C`USER\*(C'\fR environment variables to the name of the target user (usually root unless the \fB\-u\fR flag is given). However, since some programs (including the \s-1RCS\s0 revision control system) use \f(CW\*(C`LOGNAME\*(C'\fR to determine the real identity of the user, it may be desirable to change this behavior. This can be done by negating the set_logname option. .IP "stay_setuid" 12 .IX Item "stay_setuid" Normally, when \fBsudo\fR executes a command the real and effective UIDs are set to the target user (root by default). This option changes that behavior such that the real \s-1UID\s0 is left as the invoking user's \s-1UID\s0. In other words, this makes \fBsudo\fR act as a setuid wrapper. This can be useful on systems that disable some potentially dangerous functionality when a program is run setuid. Note, however, that this means that sudo will run with the real uid of the invoking user which may allow that user to kill \fBsudo\fR before it can log a failure, depending on how your \s-1OS\s0 defines the interaction between signals and setuid processes. .IP "env_reset" 12 .IX Item "env_reset" If set, \fBsudo\fR will reset the environment to only contain the following variables: \f(CW\*(C`HOME\*(C'\fR, \f(CW\*(C`LOGNAME\*(C'\fR, \f(CW\*(C`PATH\*(C'\fR, \f(CW\*(C`SHELL\*(C'\fR, \f(CW\*(C`TERM\*(C'\fR, and \f(CW\*(C`USER\*(C'\fR (in addition to the \f(CW\*(C`SUDO_*\*(C'\fR variables). Of these, only \f(CW\*(C`TERM\*(C'\fR is copied unaltered from the old environment. The other variables are set to default values (possibly modified by the value of the \fIset_logname\fR option). If \fBsudo\fR was compiled with the \f(CW\*(C`SECURE_PATH\*(C'\fR option, its value will be used for the \f(CW\*(C`PATH\*(C'\fR environment variable. Other variables may be preserved with the \fIenv_keep\fR option. .IP "use_loginclass" 12 .IX Item "use_loginclass" If set, \fBsudo\fR will apply the defaults specified for the target user's login class if one exists. Only available if \fBsudo\fR is configured with the \-\-with\-logincap option. This flag is \fIoff\fR by default. .PP \&\fBIntegers\fR: .IP "passwd_tries" 12 .IX Item "passwd_tries" The number of tries a user gets to enter his/her password before \&\fBsudo\fR logs the failure and exits. The default is \f(CW\*(C`3\*(C'\fR. .PP \&\fBIntegers that can be used in a boolean context\fR: .IP "loglinelen" 12 .IX Item "loglinelen" Number of characters per line for the file log. This value is used to decide when to wrap lines for nicer log files. This has no effect on the syslog log file, only the file log. The default is \&\f(CW\*(C`80\*(C'\fR (use 0 or negate the option to disable word wrap). .IP "timestamp_timeout" 12 .IX Item "timestamp_timeout" Number of minutes that can elapse before \fBsudo\fR will ask for a passwd again. The default is \f(CW\*(C`5\*(C'\fR. Set this to \f(CW0\fR to always prompt for a password. If set to a value less than \f(CW0\fR the user's timestamp will never expire. This can be used to allow users to create or delete their own timestamps via \f(CW\*(C`sudo \-v\*(C'\fR and \f(CW\*(C`sudo \-k\*(C'\fR respectively. .IP "passwd_timeout" 12 .IX Item "passwd_timeout" Number of minutes before the \fBsudo\fR password prompt times out. The default is \f(CW\*(C`5\*(C'\fR, set this to \f(CW0\fR for no password timeout. .IP "umask" 12 .IX Item "umask" Umask to use when running the command. Negate this option or set it to 0777 to preserve the user's umask. The default is \f(CW\*(C`0022\*(C'\fR. .PP \&\fBStrings\fR: .IP "mailsub" 12 .IX Item "mailsub" Subject of the mail sent to the \fImailto\fR user. The escape \f(CW%h\fR will expand to the hostname of the machine. Default is \f(CW\*(C`*** SECURITY information for %h ***\*(C'\fR. .IP "badpass_message" 12 .IX Item "badpass_message" Message that is displayed if a user enters an incorrect password. The default is \f(CW\*(C`Sorry, try again.\*(C'\fR unless insults are enabled. .IP "timestampdir" 12 .IX Item "timestampdir" The directory in which \fBsudo\fR stores its timestamp files. The default is \fI/var/run/sudo\fR. .IP "timestampowner" 12 .IX Item "timestampowner" The owner of the timestamp directory and the timestamps stored therein. The default is \f(CW\*(C`root\*(C'\fR. .IP "passprompt" 12 .IX Item "passprompt" The default prompt to use when asking for a password; can be overridden via the \fB\-p\fR option or the \f(CW\*(C`SUDO_PROMPT\*(C'\fR environment variable. The following percent (`\f(CW\*(C`%\*(C'\fR') escapes are supported: .RS 12 .ie n .IP "%u" 8 .el .IP "\f(CW%u\fR" 8 .IX Item "%u" expanded to the invoking user's login name .ie n .IP "%U" 8 .el .IP "\f(CW%U\fR" 8 .IX Item "%U" expanded to the login name of the user the command will be run as (defaults to root) .ie n .IP "%h" 8 .el .IP "\f(CW%h\fR" 8 .IX Item "%h" expanded to the local hostname without the domain name .ie n .IP "%H" 8 .el .IP "\f(CW%H\fR" 8 .IX Item "%H" expanded to the local hostname including the domain name (on if the machine's hostname is fully qualified or the \fIfqdn\fR option is set) .ie n .IP "\*(C`%%\*(C'" 8 .el .IP "\f(CW\*(C`%%\*(C'\fR" 8 .IX Item "%%" two consecutive \f(CW\*(C`%\*(C'\fR characters are collaped into a single \f(CW\*(C`%\*(C'\fR character .RE .RS 12 .Sp The default value is \f(CW\*(C`Password:\*(C'\fR. .RE .IP "runas_default" 12 .IX Item "runas_default" The default user to run commands as if the \fB\-u\fR flag is not specified on the command line. This defaults to \f(CW\*(C`root\*(C'\fR. .IP "syslog_goodpri" 12 .IX Item "syslog_goodpri" Syslog priority to use when user authenticates successfully. Defaults to \f(CW\*(C`notice\*(C'\fR. .IP "syslog_badpri" 12 .IX Item "syslog_badpri" Syslog priority to use when user authenticates unsuccessfully. Defaults to \f(CW\*(C`alert\*(C'\fR. .IP "editor" 12 .IX Item "editor" A colon (':') separated list of editors allowed to be used with \&\fBvisudo\fR. \fBvisudo\fR will choose the editor that matches the user's \&\s-1USER\s0 environment variable if possible, or the first editor in the list that exists and is executable. The default is the path to vi on your system. .PP \&\fBStrings that can be used in a boolean context\fR: .IP "logfile" 12 .IX Item "logfile" Path to the \fBsudo\fR log file (not the syslog log file). Setting a path turns on logging to a file; negating this option turns it off. .IP "syslog" 12 .IX Item "syslog" Syslog facility if syslog is being used for logging (negate to disable syslog logging). Defaults to \f(CW\*(C`local2\*(C'\fR. .IP "mailerpath" 12 .IX Item "mailerpath" Path to mail program used to send warning mail. Defaults to the path to sendmail found at configure time. .IP "mailerflags" 12 .IX Item "mailerflags" Flags to use when invoking mailer. Defaults to \fB\-t\fR. .IP "mailto" 12 .IX Item "mailto" Address to send warning and error mail to. The address should be enclosed in double quotes (\f(CW\*(C`"\*(C'\fR) to protect against sudo interpreting the \f(CW\*(C`@\*(C'\fR sign. Defaults to \f(CW\*(C`root\*(C'\fR. .IP "exempt_group" 12 .IX Item "exempt_group" Users in this group are exempt from password and \s-1PATH\s0 requirements. This is not set by default. .IP "verifypw" 12 .IX Item "verifypw" This option controls when a password will be required when a user runs \&\fBsudo\fR with the \fB\-v\fR flag. It has the following possible values: .RS 12 .IP "all" 8 .IX Item "all" All the user's \fIsudoers\fR entries for the current host must have the \f(CW\*(C`NOPASSWD\*(C'\fR flag set to avoid entering a password. .IP "any" 8 .IX Item "any" At least one of the user's \fIsudoers\fR entries for the current host must have the \f(CW\*(C`NOPASSWD\*(C'\fR flag set to avoid entering a password. .IP "never" 8 .IX Item "never" The user need never enter a password to use the \fB\-v\fR flag. .IP "always" 8 .IX Item "always" The user must always enter a password to use the \fB\-v\fR flag. .RE .RS 12 .Sp The default value is `all'. .RE .IP "listpw" 12 .IX Item "listpw" This option controls when a password will be required when a user runs \fBsudo\fR with the \fB\-l\fR flag. It has the following possible values: .RS 12 .IP "all" 8 .IX Item "all" All the user's \fIsudoers\fR entries for the current host must have the \f(CW\*(C`NOPASSWD\*(C'\fR flag set to avoid entering a password. .IP "any" 8 .IX Item "any" At least one of the user's \fIsudoers\fR entries for the current host must have the \f(CW\*(C`NOPASSWD\*(C'\fR flag set to avoid entering a password. .IP "never" 8 .IX Item "never" The user need never enter a password to use the \fB\-l\fR flag. .IP "always" 8 .IX Item "always" The user must always enter a password to use the \fB\-l\fR flag. .RE .RS 12 .Sp The default value is `any'. .RE .PP \&\fBLists that can be used in a boolean context\fR: .IP "env_check" 12 .IX Item "env_check" Environment variables to be removed from the user's environment if the variable's value contains \f(CW\*(C`%\*(C'\fR or \f(CW\*(C`/\*(C'\fR characters. This can be used to guard against printf-style format vulnerabilities in poorly-written programs. The argument may be a double\-quoted, space-separated list or a single value without double\-quotes. The list can be replaced, added to, deleted from, or disabled by using the \f(CW\*(C`=\*(C'\fR, \f(CW\*(C`+=\*(C'\fR, \f(CW\*(C`\-=\*(C'\fR, and \f(CW\*(C`!\*(C'\fR operators respectively. The default list of environment variables to check is printed when \fBsudo\fR is run by root with the \fI\-V\fR option. .IP "env_delete" 12 .IX Item "env_delete" Environment variables to be removed from the user's environment. The argument may be a double\-quoted, space-separated list or a single value without double\-quotes. The list can be replaced, added to, deleted from, or disabled by using the \f(CW\*(C`=\*(C'\fR, \f(CW\*(C`+=\*(C'\fR, \f(CW\*(C`\-=\*(C'\fR, and \&\f(CW\*(C`!\*(C'\fR operators respectively. The default list of environment variables to remove is printed when \fBsudo\fR is run by root with the \&\fI\-V\fR option. Note that many operating systems will remove potentially dangerous variables from the environment of any setuid process (such as \fBsudo\fR). .IP "env_keep" 12 .IX Item "env_keep" Environment variables to be preserved in the user's environment when the \fIenv_reset\fR option is in effect. This allows fine-grained control over the environment \fBsudo\fR\-spawned processes will receive. The argument may be a double\-quoted, space-separated list or a single value without double\-quotes. The list can be replaced, added to, deleted from, or disabled by using the \f(CW\*(C`=\*(C'\fR, \f(CW\*(C`+=\*(C'\fR, \f(CW\*(C`\-=\*(C'\fR, and \&\f(CW\*(C`!\*(C'\fR operators respectively. This list has no default members. .PP When logging via \fIsyslog\fR\|(3), \fBsudo\fR accepts the following values for the syslog facility (the value of the \fBsyslog\fR Parameter): \fBauthpriv\fR (if your \s-1OS\s0 supports it), \fBauth\fR, \fBdaemon\fR, \fBuser\fR, \fBlocal0\fR, \fBlocal1\fR, \fBlocal2\fR, \&\fBlocal3\fR, \fBlocal4\fR, \fBlocal5\fR, \fBlocal6\fR, and \fBlocal7\fR. The following syslog priorities are supported: \fBalert\fR, \fBcrit\fR, \fBdebug\fR, \fBemerg\fR, \&\fBerr\fR, \fBinfo\fR, \fBnotice\fR, and \fBwarning\fR. .Sh "User Specification" .IX Subsection "User Specification" .Vb 2 \& User_Spec ::= User_list Host_List '=' Cmnd_Spec_List \e \& (':' User_Spec)* .Ve .PP .Vb 2 \& Cmnd_Spec_List ::= Cmnd_Spec | \& Cmnd_Spec ',' Cmnd_Spec_List .Ve .PP .Vb 1 \& Cmnd_Spec ::= Runas_Spec? ('NOPASSWD:' | 'PASSWD:')? Cmnd .Ve .PP .Vb 1 \& Runas_Spec ::= '(' Runas_List ')' .Ve .PP A \fBuser specification\fR determines which commands a user may run (and as what user) on specified hosts. By default, commands are run as \fBroot\fR, but this can be changed on a per-command basis. .PP Let's break that down into its constituent parts: .Sh "Runas_Spec" .IX Subsection "Runas_Spec" A \f(CW\*(C`Runas_Spec\*(C'\fR is simply a \f(CW\*(C`Runas_List\*(C'\fR (as defined above) enclosed in a set of parentheses. If you do not specify a \&\f(CW\*(C`Runas_Spec\*(C'\fR in the user specification, a default \f(CW\*(C`Runas_Spec\*(C'\fR of \fBroot\fR will be used. A \f(CW\*(C`Runas_Spec\*(C'\fR sets the default for commands that follow it. What this means is that for the entry: .PP .Vb 1 \& dgb boulder = (operator) /bin/ls, /bin/kill, /usr/bin/lprm .Ve .PP The user \fBdgb\fR may run \fI/bin/ls\fR, \fI/bin/kill\fR, and \&\fI/usr/bin/lprm\fR \*(-- but only as \fBoperator\fR. E.g., .PP .Vb 1 \& sudo -u operator /bin/ls. .Ve .PP It is also possible to override a \f(CW\*(C`Runas_Spec\*(C'\fR later on in an entry. If we modify the entry like so: .PP .Vb 1 \& dgb boulder = (operator) /bin/ls, (root) /bin/kill, /usr/bin/lprm .Ve .PP Then user \fBdgb\fR is now allowed to run \fI/bin/ls\fR as \fBoperator\fR, but \fI/bin/kill\fR and \fI/usr/bin/lprm\fR as \fBroot\fR. .Sh "\s-1NOPASSWD\s0 and \s-1PASSWD\s0" .IX Subsection "NOPASSWD and PASSWD" By default, \fBsudo\fR requires that a user authenticate him or herself before running a command. This behavior can be modified via the \&\f(CW\*(C`NOPASSWD\*(C'\fR tag. Like a \f(CW\*(C`Runas_Spec\*(C'\fR, the \f(CW\*(C`NOPASSWD\*(C'\fR tag sets a default for the commands that follow it in the \f(CW\*(C`Cmnd_Spec_List\*(C'\fR. Conversely, the \f(CW\*(C`PASSWD\*(C'\fR tag can be used to reverse things. For example: .PP .Vb 1 \& ray rushmore = NOPASSWD: /bin/kill, /bin/ls, /usr/bin/lprm .Ve .PP would allow the user \fBray\fR to run \fI/bin/kill\fR, \fI/bin/ls\fR, and \&\fI/usr/bin/lprm\fR as root on the machine rushmore as \fBroot\fR without authenticating himself. If we only want \fBray\fR to be able to run \fI/bin/kill\fR without a password the entry would be: .PP .Vb 1 \& ray rushmore = NOPASSWD: /bin/kill, PASSWD: /bin/ls, /usr/bin/lprm .Ve .PP Note, however, that the \f(CW\*(C`PASSWD\*(C'\fR tag has no effect on users who are in the group specified by the exempt_group option. .PP By default, if the \f(CW\*(C`NOPASSWD\*(C'\fR tag is applied to any of the entries for a user on the current host, he or she will be able to run \&\f(CW\*(C`sudo \-l\*(C'\fR without a password. Additionally, a user may only run \&\f(CW\*(C`sudo \-v\*(C'\fR without a password if the \f(CW\*(C`NOPASSWD\*(C'\fR tag is present for all a user's entries that pertain to the current host. This behavior may be overridden via the verifypw and listpw options. .Sh "Wildcards (aka meta characters):" .IX Subsection "Wildcards (aka meta characters):" \&\fBsudo\fR allows shell-style \fIwildcards\fR to be used in pathnames as well as command line arguments in the \fIsudoers\fR file. Wildcard matching is done via the \fB\s-1POSIX\s0\fR \f(CWfnmatch(3)\fR routine. Note that these are \fInot\fR regular expressions. .ie n .IP "\*(C`*\*(C'" 8 .el .IP "\f(CW\*(C`*\*(C'\fR" 8 .IX Item "*" Matches any set of zero or more characters. .ie n .IP "\*(C`?\*(C'" 8 .el .IP "\f(CW\*(C`?\*(C'\fR" 8 .IX Item "?" Matches any single character. .ie n .IP "\*(C`[...]\*(C'" 8 .el .IP "\f(CW\*(C`[...]\*(C'\fR" 8 .IX Item "[...]" Matches any character in the specified range. .ie n .IP "\*(C`[!...]\*(C'" 8 .el .IP "\f(CW\*(C`[!...]\*(C'\fR" 8 .IX Item "[!...]" Matches any character \fBnot\fR in the specified range. .ie n .IP "\*(C`\ex\*(C'" 8 .el .IP "\f(CW\*(C`\ex\*(C'\fR" 8 .IX Item "x" For any character \*(L"x\*(R", evaluates to \*(L"x\*(R". This is used to escape special characters such as: \*(L"*\*(R", \*(L"?\*(R", \*(L"[\*(R", and \*(L"}\*(R". .PP Note that a forward slash ('/') will \fBnot\fR be matched by wildcards used in the pathname. When matching the command line arguments, however, a slash \fBdoes\fR get matched by wildcards. This is to make a path like: .PP .Vb 1 \& /usr/bin/* .Ve .PP match \f(CW\*(C`/usr/bin/who\*(C'\fR but not \f(CW\*(C`/usr/bin/X11/xterm\*(C'\fR. .Sh "Exceptions to wildcard rules:" .IX Subsection "Exceptions to wildcard rules:" The following exceptions apply to the above rules: .ie n .IP """""" 8 .el .IP "\f(CW``''\fR" 8 .IX Item """""" If the empty string \f(CW""\fR is the only command line argument in the \&\fIsudoers\fR entry it means that command is not allowed to be run with \fBany\fR arguments. .Sh "Other special characters and reserved words:" .IX Subsection "Other special characters and reserved words:" The pound sign ('#') is used to indicate a comment (unless it occurs in the context of a user name and is followed by one or more digits, in which case it is treated as a uid). Both the comment character and any text after it, up to the end of the line, are ignored. .PP The reserved word \fB\s-1ALL\s0\fR is a built in \fIalias\fR that always causes a match to succeed. It can be used wherever one might otherwise use a \f(CW\*(C`Cmnd_Alias\*(C'\fR, \f(CW\*(C`User_Alias\*(C'\fR, \f(CW\*(C`Runas_Alias\*(C'\fR, or \f(CW\*(C`Host_Alias\*(C'\fR. You should not try to define your own \fIalias\fR called \fB\s-1ALL\s0\fR as the built in alias will be used in preference to your own. Please note that using \fB\s-1ALL\s0\fR can be dangerous since in a command context, it allows the user to run \fBany\fR command on the system. .PP An exclamation point ('!') can be used as a logical \fInot\fR operator both in an \fIalias\fR and in front of a \f(CW\*(C`Cmnd\*(C'\fR. This allows one to exclude certain values. Note, however, that using a \f(CW\*(C`!\*(C'\fR in conjunction with the built in \f(CW\*(C`ALL\*(C'\fR alias to allow a user to run \*(L"all but a few\*(R" commands rarely works as intended (see \s-1SECURITY\s0 \&\s-1NOTES\s0 below). .PP Long lines can be continued with a backslash ('\e') as the last character on the line. .PP Whitespace between elements in a list as well as special syntactic characters in a \fIUser Specification\fR ('=', ':', '(', ')') is optional. .PP The following characters must be escaped with a backslash ('\e') when used as part of a word (e.g. a username or hostname): \&'@', '!', '=', ':', ',', '(', ')', '\e'. .SH "EXAMPLES" .IX Header "EXAMPLES" Below are example \fIsudoers\fR entries. Admittedly, some of these are a bit contrived. First, we define our \fIaliases\fR: .PP .Vb 4 \& # User alias specification \& User_Alias FULLTIMERS = millert, mikef, dowdy \& User_Alias PARTTIMERS = bostley, jwfox, crawl \& User_Alias WEBMASTERS = will, wendy, wim .Ve .PP .Vb 3 \& # Runas alias specification \& Runas_Alias OP = root, operator \& Runas_Alias DB = oracle, sybase .Ve .PP .Vb 9 \& # Host alias specification \& Host_Alias SPARC = bigtime, eclipse, moet, anchor :\e \& SGI = grolsch, dandelion, black :\e \& ALPHA = widget, thalamus, foobar :\e \& HPPA = boa, nag, python \& Host_Alias CUNETS = 128.138.0.0/255.255.0.0 \& Host_Alias CSNETS = 128.138.243.0, 128.138.204.0/24, 128.138.242.0 \& Host_Alias SERVERS = master, mail, www, ns \& Host_Alias CDROM = orion, perseus, hercules .Ve .PP .Vb 12 \& # Cmnd alias specification \& Cmnd_Alias DUMPS = /usr/bin/mt, /usr/sbin/dump, /usr/sbin/rdump,\e \& /usr/sbin/restore, /usr/sbin/rrestore \& Cmnd_Alias KILL = /usr/bin/kill \& Cmnd_Alias PRINTING = /usr/sbin/lpc, /usr/bin/lprm \& Cmnd_Alias SHUTDOWN = /usr/sbin/shutdown \& Cmnd_Alias HALT = /usr/sbin/halt, /usr/sbin/fasthalt \& Cmnd_Alias REBOOT = /usr/sbin/reboot, /usr/sbin/fastboot \& Cmnd_Alias SHELLS = /usr/bin/sh, /usr/bin/csh, /usr/bin/ksh, \e \& /usr/local/bin/tcsh, /usr/bin/rsh, \e \& /usr/local/bin/zsh \& Cmnd_Alias SU = /usr/bin/su .Ve .PP Here we override some of the compiled in default values. We want \&\fBsudo\fR to log via \fIsyslog\fR\|(3) using the \fIauth\fR facility in all cases. We don't want to subject the full time staff to the \fBsudo\fR lecture, user \fBmillert\fR need not give a password, and we don't want to set the \f(CW\*(C`LOGNAME\*(C'\fR or \f(CW\*(C`USER\*(C'\fR environment variables when running commands as root. Additionally, on the machines in the \&\fI\s-1SERVERS\s0\fR \f(CW\*(C`Host_Alias\*(C'\fR, we keep an additional local log file and make sure we log the year in each log line since the log entries will be kept around for several years. .PP .Vb 6 \& # Override built in defaults \& Defaults syslog=auth \& Defaults>root !set_logname \& Defaults:FULLTIMERS !lecture \& Defaults:millert !authenticate \& Defaults@SERVERS log_year, logfile=/var/log/sudo.log .Ve .PP The \fIUser specification\fR is the part that actually determines who may run what. .PP .Vb 2 \& root ALL = (ALL) ALL \& %wheel ALL = (ALL) ALL .Ve .PP We let \fBroot\fR and any user in group \fBwheel\fR run any command on any host as any user. .PP .Vb 1 \& FULLTIMERS ALL = NOPASSWD: ALL .Ve .PP Full time sysadmins (\fBmillert\fR, \fBmikef\fR, and \fBdowdy\fR) may run any command on any host without authenticating themselves. .PP .Vb 1 \& PARTTIMERS ALL = ALL .Ve .PP Part time sysadmins (\fBbostley\fR, \fBjwfox\fR, and \fBcrawl\fR) may run any command on any host but they must authenticate themselves first (since the entry lacks the \f(CW\*(C`NOPASSWD\*(C'\fR tag). .PP .Vb 1 \& jack CSNETS = ALL .Ve .PP The user \fBjack\fR may run any command on the machines in the \fI\s-1CSNETS\s0\fR alias (the networks \f(CW128.138.243.0\fR, \f(CW128.138.204.0\fR, and \f(CW128.138.242.0\fR). Of those networks, only \f(CW128.138.204.0\fR has an explicit netmask (in \&\s-1CIDR\s0 notation) indicating it is a class C network. For the other networks in \fI\s-1CSNETS\s0\fR, the local machine's netmask will be used during matching. .PP .Vb 1 \& lisa CUNETS = ALL .Ve .PP The user \fBlisa\fR may run any command on any host in the \fI\s-1CUNETS\s0\fR alias (the class B network \f(CW128.138.0.0\fR). .PP .Vb 2 \& operator ALL = DUMPS, KILL, PRINTING, SHUTDOWN, HALT, REBOOT,\e \& /usr/oper/bin/ .Ve .PP The \fBoperator\fR user may run commands limited to simple maintenance. Here, those are commands related to backups, killing processes, the printing system, shutting down the system, and any commands in the directory \fI/usr/oper/bin/\fR. .PP .Vb 1 \& joe ALL = /usr/bin/su operator .Ve .PP The user \fBjoe\fR may only \fIsu\fR\|(1) to operator. .PP .Vb 1 \& pete HPPA = /usr/bin/passwd [A-z]*, !/usr/bin/passwd root .Ve .PP The user \fBpete\fR is allowed to change anyone's password except for root on the \fI\s-1HPPA\s0\fR machines. Note that this assumes \fIpasswd\fR\|(1) does not take multiple usernames on the command line. .PP .Vb 1 \& bob SPARC = (OP) ALL : SGI = (OP) ALL .Ve .PP The user \fBbob\fR may run anything on the \fI\s-1SPARC\s0\fR and \fI\s-1SGI\s0\fR machines as any user listed in the \fI\s-1OP\s0\fR \f(CW\*(C`Runas_Alias\*(C'\fR (\fBroot\fR and \fBoperator\fR). .PP .Vb 1 \& jim +biglab = ALL .Ve .PP The user \fBjim\fR may run any command on machines in the \fIbiglab\fR netgroup. \&\fBSudo\fR knows that \*(L"biglab\*(R" is a netgroup due to the '+' prefix. .PP .Vb 1 \& +secretaries ALL = PRINTING, /usr/bin/adduser, /usr/bin/rmuser .Ve .PP Users in the \fBsecretaries\fR netgroup need to help manage the printers as well as add and remove users, so they are allowed to run those commands on all machines. .PP .Vb 1 \& fred ALL = (DB) NOPASSWD: ALL .Ve .PP The user \fBfred\fR can run commands as any user in the \fI\s-1DB\s0\fR \f(CW\*(C`Runas_Alias\*(C'\fR (\fBoracle\fR or \fBsybase\fR) without giving a password. .PP .Vb 1 \& john ALPHA = /usr/bin/su [!-]*, !/usr/bin/su *root* .Ve .PP On the \fI\s-1ALPHA\s0\fR machines, user \fBjohn\fR may su to anyone except root but he is not allowed to give \fIsu\fR\|(1) any flags. .PP .Vb 1 \& jen ALL, !SERVERS = ALL .Ve .PP The user \fBjen\fR may run any command on any machine except for those in the \fI\s-1SERVERS\s0\fR \f(CW\*(C`Host_Alias\*(C'\fR (master, mail, www and ns). .PP .Vb 1 \& jill SERVERS = /usr/bin/, !SU, !SHELLS .Ve .PP For any machine in the \fI\s-1SERVERS\s0\fR \f(CW\*(C`Host_Alias\*(C'\fR, \fBjill\fR may run any commands in the directory /usr/bin/ except for those commands belonging to the \fI\s-1SU\s0\fR and \fI\s-1SHELLS\s0\fR \f(CW\*(C`Cmnd_Aliases\*(C'\fR. .PP .Vb 1 \& steve CSNETS = (operator) /usr/local/op_commands/ .Ve .PP The user \fBsteve\fR may run any command in the directory /usr/local/op_commands/ but only as user operator. .PP .Vb 1 \& matt valkyrie = KILL .Ve .PP On his personal workstation, valkyrie, \fBmatt\fR needs to be able to kill hung processes. .PP .Vb 1 \& WEBMASTERS www = (www) ALL, (root) /usr/bin/su www .Ve .PP On the host www, any user in the \fI\s-1WEBMASTERS\s0\fR \f(CW\*(C`User_Alias\*(C'\fR (will, wendy, and wim), may run any command as user www (which owns the web pages) or simply \fIsu\fR\|(1) to www. .PP .Vb 2 \& ALL CDROM = NOPASSWD: /sbin/umount /CDROM,\e \& /sbin/mount -o nosuid\e,nodev /dev/cd0a /CDROM .Ve .PP Any user may mount or unmount a CD-ROM on the machines in the \s-1CDROM\s0 \&\f(CW\*(C`Host_Alias\*(C'\fR (orion, perseus, hercules) without entering a password. This is a bit tedious for users to type, so it is a prime candidate for encapsulating in a shell script. .SH "SECURITY NOTES" .IX Header "SECURITY NOTES" It is generally not effective to \*(L"subtract\*(R" commands from \f(CW\*(C`ALL\*(C'\fR using the '!' operator. A user can trivially circumvent this by copying the desired command to a different name and then executing that. For example: .PP .Vb 1 \& bill ALL = ALL, !SU, !SHELLS .Ve .PP Doesn't really prevent \fBbill\fR from running the commands listed in \&\fI\s-1SU\s0\fR or \fI\s-1SHELLS\s0\fR since he can simply copy those commands to a different name, or use a shell escape from an editor or other program. Therefore, these kind of restrictions should be considered advisory at best (and reinforced by policy). .SH "CAVEATS" .IX Header "CAVEATS" The \fIsudoers\fR file should \fBalways\fR be edited by the \fBvisudo\fR command which locks the file and does grammatical checking. It is imperative that \fIsudoers\fR be free of syntax errors since \fBsudo\fR will not run with a syntactically incorrect \fIsudoers\fR file. .PP When using netgroups of machines (as opposed to users), if you store fully qualified hostnames in the netgroup (as is usually the case), you either need to have the machine's hostname be fully qualified as returned by the \f(CW\*(C`hostname\*(C'\fR command or use the \fIfqdn\fR option in \&\fIsudoers\fR. .SH "FILES" .IX Header "FILES" .Vb 3 \& /etc/sudoers List of who can run what \& /etc/group Local groups file \& /etc/netgroup List of network groups .Ve .SH "SEE ALSO" .IX Header "SEE ALSO" \&\fIrsh\fR\|(1), \fIsu\fR\|(1), \fIfnmatch\fR\|(3), \fIsudo\fR\|(8), \fIvisudo\fR\|(8)